[BNX2]: update version and minor fixes
Update version and add 4 minor fixes, the last 2 were suggested by
Jeff Garzik:
1. check for a valid ethernet address before setting it
2. zero out bp->regview if init_one encounters an error and unmaps
the IO address. This prevents remove_one from unmapping again.
3. use netif_rx_schedule() instead of hand coding the same.
4. use IRQ_HANDLED and IRQ_NONE.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 418190b..7babf6a 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -14,8 +14,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.2.19"
-#define DRV_MODULE_RELDATE "May 23, 2005"
+#define DRV_MODULE_VERSION "1.2.20"
+#define DRV_MODULE_RELDATE "August 22, 2005"
#define RUN_AT(x) (jiffies + (x))
@@ -1538,15 +1538,12 @@
BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
/* Return here if interrupt is disabled. */
- if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
- return IRQ_RETVAL(1);
- }
+ if (unlikely(atomic_read(&bp->intr_sem) != 0))
+ return IRQ_HANDLED;
- if (netif_rx_schedule_prep(dev)) {
- __netif_rx_schedule(dev);
- }
+ netif_rx_schedule(dev);
- return IRQ_RETVAL(1);
+ return IRQ_HANDLED;
}
static irqreturn_t
@@ -1564,22 +1561,19 @@
if ((bp->status_blk->status_idx == bp->last_status_idx) ||
(REG_RD(bp, BNX2_PCICFG_MISC_STATUS) &
BNX2_PCICFG_MISC_STATUS_INTA_VALUE))
- return IRQ_RETVAL(0);
+ return IRQ_NONE;
REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
/* Return here if interrupt is shared and is disabled. */
- if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
- return IRQ_RETVAL(1);
- }
+ if (unlikely(atomic_read(&bp->intr_sem) != 0))
+ return IRQ_HANDLED;
- if (netif_rx_schedule_prep(dev)) {
- __netif_rx_schedule(dev);
- }
+ netif_rx_schedule(dev);
- return IRQ_RETVAL(1);
+ return IRQ_HANDLED;
}
static int
@@ -5071,6 +5065,9 @@
struct sockaddr *addr = p;
struct bnx2 *bp = dev->priv;
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
if (netif_running(dev))
bnx2_set_mac_addr(bp);
@@ -5369,6 +5366,7 @@
err_out_unmap:
if (bp->regview) {
iounmap(bp->regview);
+ bp->regview = NULL;
}
err_out_release: