diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 153740f..1921353 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -52,6 +52,10 @@
 		 apicmaintimer. Useful when your PIT timer is totally
 		 broken.
 
+   disable_8254_timer / enable_8254_timer
+		 Enable interrupt 0 timer routing over the 8254 in addition to over
+	         the IO-APIC. The kernel tries to set a sensible default.
+
 Early Console
 
    syntax: earlyprintk=vga
diff --git a/Makefile b/Makefile
index 77a448c..46eea76 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 16
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
 NAME=Sliding Snow Leopard
 
 # *DOCUMENTATION*
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 0afec85..5b1a7d4 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -733,7 +733,7 @@
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL
+	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
 	---help---
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1060,6 +1060,7 @@
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 79577f0..8309a7b 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -44,9 +44,6 @@
 extern int gsi_irq_sharing(int gsi);
 #include <asm/proto.h>
 
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
-
-
 #else				/* X86 */
 
 #ifdef	CONFIG_X86_LOCAL_APIC
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index f2dd218..235822b 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -2566,8 +2566,10 @@
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 
 		/* Sanity check */
-		if (reg_00.bits.ID != apic_id)
-			panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
+		if (reg_00.bits.ID != apic_id) {
+			printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+			return -1;
+		}
 	}
 
 	apic_printk(APIC_VERBOSE, KERN_INFO
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
index e7609ab..e6e2f43 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/i386/kernel/mpparse.c
@@ -915,6 +915,7 @@
 	u32			gsi_base)
 {
 	int			idx = 0;
+	int			tmpid;
 
 	if (nr_ioapics >= MAX_IO_APICS) {
 		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
@@ -935,9 +936,14 @@
 
 	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15))
-		mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+		tmpid = io_apic_get_unique_id(idx, id);
 	else
-		mp_ioapics[idx].mpc_apicid = id;
+		tmpid = id;
+	if (tmpid == -1) {
+		nr_ioapics--;
+		return;
+	}
+	mp_ioapics[idx].mpc_apicid = tmpid;
 	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
 	
 	/* 
diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c
index 6761d29..b584060 100644
--- a/arch/i386/mach-voyager/voyager_basic.c
+++ b/arch/i386/mach-voyager/voyager_basic.c
@@ -25,7 +25,6 @@
 #include <linux/sysrq.h>
 #include <linux/smp.h>
 #include <linux/nodemask.h>
-#include <asm/cpu.h>
 #include <asm/io.h>
 #include <asm/voyager.h>
 #include <asm/vic.h>
@@ -331,16 +330,3 @@
 	if (pm_power_off)
 		pm_power_off();
 }
-
-static struct i386_cpu cpu_devices[NR_CPUS];
-
-static int __init topology_init(void)
-{
-	int i;
-
-	for_each_present_cpu(i)
-		register_cpu(&cpu_devices[i].cpu, i, NULL);
-	return 0;
-}
-
-subsys_initcall(topology_init);
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 845cd09..a85ea9d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -453,6 +453,7 @@
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 80d114a..a834f9e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -963,7 +963,7 @@
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
-	depends on PPC64
+	depends on PPC64 && EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index ab733be..4c0a50a 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -383,6 +383,7 @@
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index 054461e..158bd31 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -542,6 +542,8 @@
 	}
 #endif
 
+	smp_setup_cpu_possible_map();
+
 	paging_init();
 }
 
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 1fb6323..1f7ad8a 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1079,18 +1079,12 @@
 	return 0;
 }
 
+/* Constrain the number of cpus to max_cpus.  */
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	int instance, mid;
-
-	instance = 0;
-	while (!cpu_find_by_instance(instance, NULL, &mid)) {
-		if (mid < max_cpus)
-			cpu_set(mid, phys_cpu_present_map);
-		instance++;
-	}
-
 	if (num_possible_cpus() > max_cpus) {
+		int instance, mid;
+
 		instance = 0;
 		while (!cpu_find_by_instance(instance, NULL, &mid)) {
 			if (mid != boot_cpu_id) {
@@ -1105,6 +1099,22 @@
 	smp_store_cpu_info(boot_cpu_id);
 }
 
+/* Set this up early so that things like the scheduler can init
+ * properly.  We use the same cpu mask for both the present and
+ * possible cpu map.
+ */
+void __init smp_setup_cpu_possible_map(void)
+{
+	int instance, mid;
+
+	instance = 0;
+	while (!cpu_find_by_instance(instance, NULL, &mid)) {
+		if (mid < NR_CPUS)
+			cpu_set(mid, phys_cpu_present_map);
+		instance++;
+	}
+}
+
 void __devinit smp_prepare_boot_cpu(void)
 {
 	if (hard_smp_processor_id() >= NR_CPUS) {
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 2f9deca..e18eb79 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -354,21 +354,6 @@
 	  as it is off-chip.  You can find the HPET spec at
 	  <http://www.intel.com/hardwaredesign/hpetspec.htm>.
 
-config X86_PM_TIMER
-	bool "PM timer" if EMBEDDED
-	depends on ACPI
-	default y
-	help
-	  Support the ACPI PM timer for time keeping. This is slow,
-	  but is useful on some chipsets without HPET on systems with more
-	  than one CPU. On a single processor or single socket multi core
-	  system it is normally not required.
-	  When the PM timer is active 64bit vsyscalls are disabled
-	  and should not be enabled (/proc/sys/kernel/vsyscall64 should
-	  not be changed).
-	  The kernel selects the PM timer only as a last resort, so it is
-	  useful to enable just in case.
-
 config HPET_EMULATE_RTC
 	bool "Provide RTC interrupt"
 	depends on HPET_TIMER && RTC=y
@@ -592,6 +577,7 @@
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c
index e4e2b7d..a0f955b 100644
--- a/arch/x86_64/kernel/aperture.c
+++ b/arch/x86_64/kernel/aperture.c
@@ -248,7 +248,7 @@
 		/* Got the aperture from the AGP bridge */
 	} else if (swiotlb && !valid_agp) {
 		/* Do nothing */
-	} else if ((!no_iommu && end_pfn >= MAX_DMA32_PFN) ||
+	} else if ((!no_iommu && end_pfn > MAX_DMA32_PFN) ||
 		   force_iommu ||
 		   valid_agp ||
 		   fallback_aper_force) { 
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index e5b14c5..d70605e 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -962,12 +962,14 @@
 	irq_exit();
 }
 
+int __initdata unsync_tsc_on_multicluster;
+
 /*
  * oem_force_hpet_timer -- force HPET mode for some boxes.
  *
  * Thus far, the major user of this is IBM's Summit2 series:
  *
- * Clustered boxes may have unsynced TSC problems if they are
+ * Some clustered boxes may have unsynced TSC problems if they are
  * multi-chassis. Use available data to take a good guess.
  * If in doubt, go HPET.
  */
@@ -977,6 +979,11 @@
 	unsigned id;
 	DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
 
+	/* Only do this check on IBM machines - big Unisys systems
+	   use multiple clusters too, but have synchronized TSC */
+	if (!unsync_tsc_on_multicluster)
+		return 0;
+
 	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
 
 	for (i = 0; i < NR_CPUS; i++) {
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 2585c1d..ffed464 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -50,6 +50,8 @@
 
 int disable_timer_pin_1 __initdata;
 
+int timer_over_8254 __initdata = 1;
+
 /* Where if anywhere is the i8259 connect in external int mode */
 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
 
@@ -251,6 +253,20 @@
 __setup("noapic", disable_ioapic_setup);
 __setup("apic", enable_ioapic_setup);
 
+static int __init setup_disable_8254_timer(char *s)
+{
+	timer_over_8254 = -1;
+	return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+	timer_over_8254 = 2;
+	return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
 #include <asm/pci-direct.h>
 #include <linux/pci_ids.h>
 #include <linux/pci.h>
@@ -309,27 +325,20 @@
 #endif
 					/* RED-PEN skip them on mptables too? */
 					return;
+
+				/* This should be actually default, but
+				   for 2.6.16 let's do it for ATI only where
+				   it's really needed. */
 				case PCI_VENDOR_ID_ATI:
-					if (apic_runs_main_timer != 0)
-						break;
-#ifdef CONFIG_ACPI
-					/* Don't do this for laptops right
-					   right now because their timer
-					   doesn't necessarily tick in C2/3 */
-					if (acpi_fadt.revision >= 3 &&
-			(acpi_fadt.plvl2_lat + acpi_fadt.plvl3_lat) < 1100) {
-						printk(KERN_INFO
-"ATI board detected, but seems to be a laptop. Timer might be shakey, sorry\n");
-						break;
-					}
-#endif					
+					if (timer_over_8254 == 1) {	
+						timer_over_8254 = 0;	
 					printk(KERN_INFO
-	     "ATI board detected. Using APIC/PM timer.\n");
-					apic_runs_main_timer = 1;
-					nohpet = 1;
+		"ATI board detected. Disabling timer routing over 8254.\n");
+					}	
 					return;
 				} 
 
+
 				/* No multi-function device? */
 				type = read_pci_config_byte(num,slot,func,
 							    PCI_HEADER_TYPE);
@@ -1773,6 +1782,8 @@
  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
  * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
  * fanatically on his truly buggy board.
+ *
+ * FIXME: really need to revamp this for modern platforms only.
  */
 static inline void check_timer(void)
 {
@@ -1795,7 +1806,8 @@
 	 */
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
-	enable_8259A_irq(0);
+	if (timer_over_8254 > 0)
+		enable_8259A_irq(0);
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
@@ -1850,7 +1862,7 @@
 	}
 	printk(" failed.\n");
 
-	if (nmi_watchdog) {
+	if (nmi_watchdog == NMI_IO_APIC) {
 		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
 		nmi_watchdog = 0;
 	}
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index dd0718d..0c3f052 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -228,11 +228,6 @@
 	int mmu = high;
 	if (force_iommu) 
 		mmu = 1; 
-	if (no_iommu) { 
-		if (high) 
-			panic("PCI-DMA: high address but no IOMMU.\n"); 
-		mmu = 0; 
-	} 	
 	return mmu; 
 }
 
@@ -241,11 +236,6 @@
 	u64 mask = *dev->dma_mask;
 	int high = addr + size >= mask;
 	int mmu = high;
-	if (no_iommu) { 
-		if (high) 
-			panic("PCI-DMA: high address but no IOMMU.\n"); 
-		mmu = 0; 
-	} 	
 	return mmu; 
 }
 
@@ -310,7 +300,7 @@
 
 	for (i = 0; i < nents; i++) {
 		struct scatterlist *s = &sg[i];
-		if (!s->dma_length)
+		if (!s->dma_length || !s->length)
 			break;
 		dma_unmap_single(dev, s->dma_address, s->dma_length, dir);
 	}
@@ -364,6 +354,7 @@
 		
 		BUG_ON(i > start && s->offset);
 		if (i == start) {
+			*sout = *s; 
 			sout->dma_address = iommu_bus_base;
 			sout->dma_address += iommu_page*PAGE_SIZE + s->offset;
 			sout->dma_length = s->length;
@@ -390,6 +381,7 @@
 {
 	if (!need) { 
 		BUG_ON(stopat - start != 1);
+		*sout = sg[start]; 
 		sout->dma_length = sg[start].length; 
 		return 0;
 	} 
@@ -632,17 +624,13 @@
 		(agp_copy_info(agp_bridge, &info) < 0);
 #endif	
 
-	if (swiotlb) { 
-		no_iommu = 1;
+	if (swiotlb)
 		return -1; 
-	} 
-	
+
 	if (no_iommu ||
 	    (!force_iommu && end_pfn <= MAX_DMA32_PFN) ||
 	    !iommu_aperture ||
 	    (no_agp && init_k8_gatt(&info) < 0)) {
-		no_iommu = 1;
-		no_iommu_init();
 		printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
 		if (end_pfn > MAX_DMA32_PFN) {
 			printk(KERN_ERR "WARNING more than 4GB of memory "
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 9435ab7..aa55e3c 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -423,6 +423,12 @@
 		else if(!memcmp(from, "elfcorehdr=", 11))
 			elfcorehdr_addr = memparse(from+11, &from);
 #endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+		else if (!memcmp(from, "additional_cpus=", 16))
+			setup_additional_cpus(from+16);
+#endif
+
 	next_char:
 		c = *(from++);
 		if (!c)
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index 67e4e28..66e9865 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -1152,8 +1152,6 @@
 	setup_ioapic_dest();
 #endif
 
-	time_init_gtod();
-
 	check_nmi_watchdog();
 }
 
@@ -1244,7 +1242,7 @@
  	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
 }
 
-static __init int setup_additional_cpus(char *s)
+__init int setup_additional_cpus(char *s)
 {
 	return get_option(&s, &additional_cpus);
 }
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index 67841d1..3080f84 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -48,6 +48,8 @@
 extern void i8254_timer_resume(void);
 extern int using_apic_timer;
 
+static char *time_init_gtod(void);
+
 DEFINE_SPINLOCK(rtc_lock);
 DEFINE_SPINLOCK(i8253_lock);
 
@@ -901,6 +903,7 @@
 void __init time_init(void)
 {
 	char *timename;
+	char *gtod;
 
 #ifdef HPET_HACK_ENABLE_DANGEROUS
         if (!vxtime.hpet_address) {
@@ -945,21 +948,19 @@
 		timename = "PIT";
 	}
 
-	printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n",
-	       vxtime_hz / 1000000, vxtime_hz % 1000000, timename);
+	vxtime.mode = VXTIME_TSC;
+	gtod = time_init_gtod();
+
+	printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
+	       vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod);
 	printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
 		cpu_khz / 1000, cpu_khz % 1000);
-	vxtime.mode = VXTIME_TSC;
 	vxtime.quot = (1000000L << 32) / vxtime_hz;
 	vxtime.tsc_quot = (1000L << 32) / cpu_khz;
 	vxtime.last_tsc = get_cycles_sync();
 	setup_irq(0, &irq0);
 
 	set_cyc2ns_scale(cpu_khz);
-
-#ifndef CONFIG_SMP
-	time_init_gtod();
-#endif
 }
 
 /*
@@ -981,9 +982,9 @@
 }
 
 /*
- * Decide after all CPUs are booted what mode gettimeofday should use.
+ * Decide what mode gettimeofday should use.
  */
-void __init time_init_gtod(void)
+__init static char *time_init_gtod(void)
 {
 	char *timetype;
 
@@ -1011,8 +1012,7 @@
 		timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC";
 		vxtime.mode = VXTIME_TSC;
 	}
-
-	printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype);
+	return timetype;
 }
 
 __setup("report_lost_ticks", time_setup);
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 0cce28c..33e2ca8 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -247,7 +247,7 @@
 	  Enter the full path name to the file wich includes the AmlCode declaration.
 
 config ACPI_BLACKLIST_YEAR
-	int "Disable ACPI for systems before Jan 1st this year" if X86
+	int "Disable ACPI for systems before Jan 1st this year" if X86_32
 	default 0
 	help
 	  enter a 4-digit year, eg. 2001 to disable ACPI by default
@@ -285,9 +285,8 @@
 	  dump your ACPI DSDT table using /proc/acpi/dsdt.
 
 config X86_PM_TIMER
-	bool "Power Management Timer Support"
+	bool "Power Management Timer Support" if EMBEDDED
 	depends on X86
-	depends on !X86_64
 	default y
 	help
 	  The Power Management Timer is available on all ACPI-capable,
@@ -298,9 +297,8 @@
 	  voltage scaling, unlike the commonly used Time Stamp Counter
 	  (TSC) timing source.
 
-	  So, if you see messages like 'Losing too many ticks!' in the
-	  kernel logs, and/or you are using this on a notebook which
-	  does not yet have an HPET, you should say "Y" here.
+	  You should nearly always say Y here because many modern
+	  systems require this timer. 
 
 config ACPI_CONTAINER
 	tristate "ACPI0004,PNP0A05 and PNP0A06 Container Driver (EXPERIMENTAL)"
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index c2490e2..588e75e 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -2173,15 +2173,17 @@
 	if ( IS_SI1_BOARD(board)) {
 		/* This should be an SI1 board, which has this
 		   location writable... */
-		if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
+		if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
 			func_exit ();
 			return 0; 
+		}
 	} else {
 		/* This should be an SI2 board, which has the bottom
 		   3 bits non-writable... */
-		if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
+		if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
 			func_exit ();
 			return 0; 
+		}
 	}
 
 	/* Now we're pretty much convinced that there is an SI board here, 
@@ -2192,15 +2194,17 @@
 	if ( IS_SI1_BOARD(board)) {
 		/* This should be an SI1 board, which has this
 		   location writable... */
-		if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
+		if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10) {
 			func_exit();
 			return 0; 
+		}
 	} else {
 		/* This should be an SI2 board, which has the bottom
 		   3 bits non-writable... */
-		if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
+		if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10) {
 			func_exit ();
 			return 0; 
+		}
 	}
 
 	printheader ();
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 930db39..9d98723 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -89,6 +89,11 @@
 #define SD_MAX_RETRIES		5
 #define SD_PASSTHROUGH_RETRIES	1
 
+/*
+ * Size of the initial data buffer for mode and read capacity data
+ */
+#define SD_BUF_SIZE		512
+
 static void scsi_disk_release(struct kref *kref);
 
 struct scsi_disk {
@@ -1239,7 +1244,7 @@
 
 /*
  * read write protect setting, if possible - called only in sd_revalidate_disk()
- * called with buffer of length 512
+ * called with buffer of length SD_BUF_SIZE
  */
 static void
 sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
@@ -1297,7 +1302,7 @@
 
 /*
  * sd_read_cache_type - called only from sd_revalidate_disk()
- * called with buffer of length 512
+ * called with buffer of length SD_BUF_SIZE
  */
 static void
 sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
@@ -1342,6 +1347,8 @@
 
 	/* Take headers and block descriptors into account */
 	len += data.header_length + data.block_descriptor_length;
+	if (len > SD_BUF_SIZE)
+		goto bad_sense;
 
 	/* Get the data */
 	res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr);
@@ -1354,6 +1361,12 @@
 		int ct = 0;
 		int offset = data.header_length + data.block_descriptor_length;
 
+		if (offset >= SD_BUF_SIZE - 2) {
+			printk(KERN_ERR "%s: malformed MODE SENSE response",
+				diskname);
+			goto defaults;
+		}
+
 		if ((buffer[offset] & 0x3f) != modepage) {
 			printk(KERN_ERR "%s: got wrong page\n", diskname);
 			goto defaults;
@@ -1398,6 +1411,7 @@
 	       diskname);
 	sdkp->WCE = 0;
 	sdkp->RCD = 0;
+	sdkp->DPOFUA = 0;
 }
 
 /**
@@ -1421,7 +1435,7 @@
 	if (!scsi_device_online(sdp))
 		goto out;
 
-	buffer = kmalloc(512, GFP_KERNEL | __GFP_DMA);
+	buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL | __GFP_DMA);
 	if (!buffer) {
 		printk(KERN_WARNING "(sd_revalidate_disk:) Memory allocation "
 		       "failure.\n");
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index 1b117a4..c2eac2a 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -938,6 +938,11 @@
 		kfree(elf_interpreter);
 	} else {
 		elf_entry = loc->elf_ex.e_entry;
+		if (BAD_ADDR(elf_entry)) {
+			send_sig(SIGSEGV, current, 0);
+			retval = -ENOEXEC; /* Nobody gets to see this, but.. */
+			goto out_free_dentry;
+		}
 	}
 
 	kfree(elf_phdata);
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 057e602..537ac70 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -2531,18 +2531,9 @@
 		val32 = kval;
 		return put_user(val32, (unsigned int __user *)arg);
 	case RTC_IRQP_SET32:
+		return sys_ioctl(fd, RTC_IRQP_SET, arg); 
 	case RTC_EPOCH_SET32:
-		ret = get_user(val32, (unsigned int __user *)arg);
-		if (ret)
-			return ret;
-		kval = val32;
-
-		set_fs(KERNEL_DS);
-		ret = sys_ioctl(fd, (cmd == RTC_IRQP_SET32) ?
-				RTC_IRQP_SET : RTC_EPOCH_SET,
-				(unsigned long)&kval);
-		set_fs(oldfs);
-		return ret;
+		return sys_ioctl(fd, RTC_EPOCH_SET, arg);
 	default:
 		/* unreached */
 		return -ENOIOCTLCMD;
diff --git a/include/asm-sparc64/futex.h b/include/asm-sparc64/futex.h
index 6a332a9..0caf601 100644
--- a/include/asm-sparc64/futex.h
+++ b/include/asm-sparc64/futex.h
@@ -1,6 +1,86 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _SPARC64_FUTEX_H
+#define _SPARC64_FUTEX_H
 
-#include <asm-generic/futex.h>
+#include <linux/futex.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
 
-#endif
+#define __futex_cas_op(insn, ret, oldval, uaddr, oparg)	\
+	__asm__ __volatile__(				\
+	"\n1:	lduwa	[%3] %%asi, %2\n"		\
+	"	" insn "\n"				\
+	"2:	casa	[%3] %%asi, %2, %1\n"		\
+	"	cmp	%2, %1\n"			\
+	"	bne,pn	%%icc, 1b\n"			\
+	"	 mov	0, %0\n"			\
+	"3:\n"						\
+	"	.section .fixup,#alloc,#execinstr\n"	\
+	"	.align	4\n"				\
+	"4:	ba	3b\n"				\
+	"	 mov	%5, %0\n"			\
+	"	.previous\n"				\
+	"	.section __ex_table,#alloc\n"		\
+	"	.align	4\n"				\
+	"	.word	1b, 4b\n"			\
+	"	.word	2b, 4b\n"			\
+	"	.previous\n"				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tem)	\
+	: "r" (uaddr), "r" (oparg), "i" (-EFAULT)	\
+	: "memory")
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret, tem;
+
+	if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(int))))
+		return -EFAULT;
+	if (unlikely((((unsigned long) uaddr) & 0x3UL)))
+		return -EINVAL;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	inc_preempt_count();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_cas_op("mov\t%4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_cas_op("add\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	dec_preempt_count();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+#endif /* !(_SPARC64_FUTEX_H) */
diff --git a/include/asm-sparc64/smp.h b/include/asm-sparc64/smp.h
index 110a2de..473edb2 100644
--- a/include/asm-sparc64/smp.h
+++ b/include/asm-sparc64/smp.h
@@ -66,8 +66,14 @@
 
 #define raw_smp_processor_id() (current_thread_info()->cpu)
 
+extern void smp_setup_cpu_possible_map(void);
+
 #endif /* !(__ASSEMBLY__) */
 
+#else
+
+#define smp_setup_cpu_possible_map() do { } while (0)
+
 #endif /* !(CONFIG_SMP) */
 
 #define NO_PROC_ID		0xFF
diff --git a/include/asm-x86_64/acpi.h b/include/asm-x86_64/acpi.h
index aa1c7b2..e2b9923 100644
--- a/include/asm-x86_64/acpi.h
+++ b/include/asm-x86_64/acpi.h
@@ -164,6 +164,20 @@
 
 extern int acpi_skip_timer_override;
 
+extern int unsync_tsc_on_multicluster;
+
+static inline int acpi_madt_oem_check(char *oem, char *productid) 
+{ 
+	/* Copied from i386. Probably has too many entries. */
+	if (!strncmp(oem, "IBM ENSW", 8) && 
+        	(!strncmp(productid, "VIGIL SMP", 9) 
+             		|| !strncmp(productid, "EXA", 3)
+			|| !strncmp(productid, "RUTHLESS SMP", 12))) {
+		unsync_tsc_on_multicluster = 1;
+        }
+        return 0;
+}
+
 #endif /*__KERNEL__*/
 
 #endif /*_ASM_ACPI_H*/
diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h
index fd03e15..8a05af2 100644
--- a/include/asm-x86_64/pci.h
+++ b/include/asm-x86_64/pci.h
@@ -19,8 +19,6 @@
 #endif
 #define pcibios_scan_all_fns(a, b)	0
 
-extern int no_iommu, force_iommu;
-
 extern unsigned long pci_mem_start;
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM		(pci_mem_start)
diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h
index 8fbf4dd..715fd94 100644
--- a/include/asm-x86_64/pgtable.h
+++ b/include/asm-x86_64/pgtable.h
@@ -131,7 +131,7 @@
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 
-#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
+#define USER_PTRS_PER_PGD	((TASK_SIZE-1)/PGDIR_SIZE+1)
 #define FIRST_USER_ADDRESS	0
 
 #ifndef __ASSEMBLY__
diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h
index eca3f2d..3ba8fd4 100644
--- a/include/asm-x86_64/proto.h
+++ b/include/asm-x86_64/proto.h
@@ -39,7 +39,6 @@
 extern void ia32_syscall(void);
 extern void iommu_hole_init(void);
 
-extern void time_init_gtod(void);
 extern int pmtimer_mark_offset(void);
 extern void pmtimer_resume(void);
 extern void pmtimer_wait(unsigned);
@@ -134,6 +133,7 @@
 
 extern int reboot_force;
 extern int notsc_setup(char *);
+extern int setup_additional_cpus(char *);
 
 extern void smp_local_timer_interrupt(struct pt_regs * regs);