V4L/DVB (6021): cx88: Copy board information into card state
The cx88 driver state stored the ID of the board type in core->board. Every
time the driver need to get some information about the board configuration, it
uses the board number as an index into board configuration array.
This patch changes it so that the board number is in core->boardnr, and
core->board is a copy of the board configuration information. This allows
access to board information without the extra indirection. e.g.
cx88_boards[core->board].mpeg becomes core->board.mpeg.
This has a number of advantages:
- The code is simpler to write.
- It compiles to be smaller and faster, without needing the extra array lookup
to get at the board information.
- The cx88_boards array no longer needs to be exported to all cx88 modules.
- The boards array can be made const
- It should be possible to avoid keeping the (large) cx88_boards array around
after the module is loaded.
- If module parameters or eeprom info override some board configuration
setting, it's not necessary to modify the boards array, which would
affect all boards of the same type.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index f2fcdb9..74e3eb9 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -734,14 +734,14 @@
struct cx88_core *core = dev->core;
strcpy(cap->driver, "cx88_blackbird");
- strlcpy(cap->card, cx88_boards[core->board].name,sizeof(cap->card));
+ strlcpy(cap->card, core->board.name, sizeof(cap->card));
sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci));
cap->version = CX88_VERSION_CODE;
cap->capabilities =
V4L2_CAP_VIDEO_CAPTURE |
V4L2_CAP_READWRITE |
V4L2_CAP_STREAMING;
- if (UNSET != core->tuner_type)
+ if (UNSET != core->board.tuner_type)
cap->capabilities |= V4L2_CAP_TUNER;
return 0;
}
@@ -990,7 +990,7 @@
struct cx8802_fh *fh = priv;
struct cx88_core *core = fh->dev->core;
- if (unlikely(UNSET == core->tuner_type))
+ if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
f->type = V4L2_TUNER_ANALOG_TV;
@@ -1028,7 +1028,7 @@
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
u32 reg;
- if (unlikely(UNSET == core->tuner_type))
+ if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
if (0 != t->index)
return -EINVAL;
@@ -1049,7 +1049,7 @@
{
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
- if (UNSET == core->tuner_type)
+ if (UNSET == core->board.tuner_type)
return -EINVAL;
if (0 != t->index)
return -EINVAL;
@@ -1246,7 +1246,7 @@
struct cx88_core *core = drv->core;
int err = 0;
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* By default, core setup will leave the cx22702 out of reset, on the bus.
* We left the hardware on power up with the cx22702 active.
@@ -1268,7 +1268,7 @@
struct cx88_core *core = drv->core;
int err = 0;
- switch (core->board) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Exit leaving the cx23416 on the bus */
break;
@@ -1316,13 +1316,13 @@
dprintk( 1, "%s\n", __FUNCTION__);
dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
- core->board,
+ core->boardnr,
core->name,
core->pci_bus,
core->pci_slot);
err = -ENODEV;
- if (!(cx88_boards[core->board].mpeg & CX88_MPEG_BLACKBIRD))
+ if (!(core->board.mpeg & CX88_MPEG_BLACKBIRD))
goto fail_core;
dev->width = 720;