Gitiles
Code Review Sign In
review.shift-gmbh.com / SHIFTPHONES / kernel / shift / mainline / 644c989f417e66b5434aa89ada829ee2822e2ef0
commit644c989f417e66b5434aa89ada829ee2822e2ef0[log] [tgz]
authorGreg Kroah-Hartman <gregkh@google.com>Wed Mar 23 12:30:33 2022 +0100
committerGreg Kroah-Hartman <gregkh@google.com>Wed Mar 23 12:30:33 2022 +0100
treead11f07d62bd0eac889f57b3b8aeec1ef1c06717
parent9a559b886861bacfaeb0f31f300003d56fdc85f6 [diff]
parent9940314ebfc61cb7bc7fca4a0deed2f27fdefd11 [diff]
Merge 5.10.108 into android12-5.10-lts

Changes in 5.10.108
	crypto: qcom-rng - ensure buffer for generate is completely filled
	ocfs2: fix crash when initialize filecheck kobj fails
	mm: swap: get rid of livelock in swapin readahead
	efi: fix return value of __setup handlers
	vsock: each transport cycles only on its own sockets
	esp6: fix check on ipv6_skip_exthdr's return value
	net: phy: marvell: Fix invalid comparison in the resume and suspend functions
	net/packet: fix slab-out-of-bounds access in packet_recvmsg()
	atm: eni: Add check for dma_map_single
	hv_netvsc: Add check for kvmalloc_array
	drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
	drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings
	net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()
	net: dsa: Add missing of_node_put() in dsa_port_parse_of
	net: phy: mscc: Add MODULE_FIRMWARE macros
	bnx2x: fix built-in kernel driver load failure
	net: bcmgenet: skip invalid partial checksums
	net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload
	arm64: fix clang warning about TRAMP_VALIAS
	usb: gadget: rndis: prevent integer overflow in rndis_set_response()
	usb: gadget: Fix use-after-free bug by not setting udc->dev.driver
	usb: usbtmc: Fix bug in pipe direction for control transfers
	scsi: mpt3sas: Page fault in reply q processing
	Input: aiptek - properly check endpoint type
	perf symbols: Fix symbol size calculation condition
	net: usb: Correct PHY handling of smsc95xx
	net: usb: Correct reset handling of smsc95xx
	smsc95xx: Ignore -ENODEV errors when device is unplugged
	esp: Fix possible buffer overflow in ESP transformation
	Revert "selftests/bpf: Add test for bpf_timer overwriting crash"
	Linux 5.10.108

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I618f4ec34bfcb8c11821276c5105c46d3aace78c
tree: ad11f07d62bd0eac889f57b3b8aeec1ef1c06717
  1. android/
  2. arch/
  3. block/
  4. certs/
  5. crypto/
  6. Documentation/
  7. drivers/
  8. fs/
  9. include/
  10. init/
  11. ipc/
  12. kernel/
  13. lib/
  14. LICENSES/
  15. mm/
  16. net/
  17. samples/
  18. scripts/
  19. security/
  20. sound/
  21. tools/
  22. usr/
  23. virt/
  24. .clang-format
  25. .cocciconfig
  26. .get_maintainer.ignore
  27. .gitattributes
  28. .gitignore
  29. .mailmap
  30. build.config.aarch64
  31. build.config.allmodconfig
  32. build.config.allmodconfig.aarch64
  33. build.config.allmodconfig.arm
  34. build.config.allmodconfig.x86_64
  35. build.config.amlogic
  36. build.config.arm
  37. build.config.common
  38. build.config.db845c
  39. build.config.gki
  40. build.config.gki-debug.aarch64
  41. build.config.gki-debug.x86_64
  42. build.config.gki.aarch64
  43. build.config.gki.aarch64.fips140
  44. build.config.gki.aarch64.fips140_eval_testing
  45. build.config.gki.x86_64
  46. build.config.gki_kasan
  47. build.config.gki_kasan.aarch64
  48. build.config.gki_kasan.x86_64
  49. build.config.gki_kprobes
  50. build.config.gki_kprobes.aarch64
  51. build.config.gki_kprobes.x86_64
  52. build.config.hikey960
  53. build.config.khwasan
  54. build.config.rockchip
  55. build.config.x86_64
  56. COPYING
  57. CREDITS
  58. Kbuild
  59. Kconfig
  60. MAINTAINERS
  61. Makefile
  62. OWNERS
  63. README
  64. README.md
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.

  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)