Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net
Jeff Kirsher says:
====================
This series contains fixes to e1000e.
...
Bruce Allan (1):
e1000e: fix test for PHY being accessible on 82577/8/9 and I217
Tushar Dave (1):
e1000e: Correct link check logic for 82571 serdes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
index 36db4df..1f063dc 100644
--- a/drivers/net/ethernet/intel/e1000e/82571.c
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -1572,6 +1572,9 @@
ctrl = er32(CTRL);
status = er32(STATUS);
rxcw = er32(RXCW);
+ /* SYNCH bit and IV bit are sticky */
+ udelay(10);
+ rxcw = er32(RXCW);
if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 238ab2f..e3a7b07 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -325,24 +325,46 @@
**/
static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
{
- u16 phy_reg;
- u32 phy_id;
+ u16 phy_reg = 0;
+ u32 phy_id = 0;
+ s32 ret_val;
+ u16 retry_count;
- e1e_rphy_locked(hw, PHY_ID1, &phy_reg);
- phy_id = (u32)(phy_reg << 16);
- e1e_rphy_locked(hw, PHY_ID2, &phy_reg);
- phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+ for (retry_count = 0; retry_count < 2; retry_count++) {
+ ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg);
+ if (ret_val || (phy_reg == 0xFFFF))
+ continue;
+ phy_id = (u32)(phy_reg << 16);
+
+ ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg);
+ if (ret_val || (phy_reg == 0xFFFF)) {
+ phy_id = 0;
+ continue;
+ }
+ phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+ break;
+ }
if (hw->phy.id) {
if (hw->phy.id == phy_id)
return true;
- } else {
- if ((phy_id != 0) && (phy_id != PHY_REVISION_MASK))
- hw->phy.id = phy_id;
+ } else if (phy_id) {
+ hw->phy.id = phy_id;
+ hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK);
return true;
}
- return false;
+ /*
+ * In case the PHY needs to be in mdio slow mode,
+ * set slow mode and try to get the PHY id again.
+ */
+ hw->phy.ops.release(hw);
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (!ret_val)
+ ret_val = e1000e_get_phy_id(hw);
+ hw->phy.ops.acquire(hw);
+
+ return !ret_val;
}
/**