smc91x: remove isa stuff from smc91x driver
ISA support in smc91x is incomplete. I doubt there're any smc91x isa card.
This driver is greatly used on arm pxa platforms. Hence we remove the
isa stuff from smc91x driver.
Signed-off-by: Luotao Fu <lfu@pengutronix.de>
Acked-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 54912aa..b215a8d 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -90,33 +90,6 @@
#include "smc91x.h"
-#ifdef CONFIG_ISA
-/*
- * the LAN91C111 can be at any of the following port addresses. To change,
- * for a slightly different card, you can add it to the array. Keep in
- * mind that the array must end in zero.
- */
-static unsigned int smc_portlist[] __initdata = {
- 0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0,
- 0x300, 0x320, 0x340, 0x360, 0x380, 0x3A0, 0x3C0, 0x3E0, 0
-};
-
-#ifndef SMC_IOADDR
-# define SMC_IOADDR -1
-#endif
-static unsigned long io = SMC_IOADDR;
-module_param(io, ulong, 0400);
-MODULE_PARM_DESC(io, "I/O base address");
-
-#ifndef SMC_IRQ
-# define SMC_IRQ -1
-#endif
-static int irq = SMC_IRQ;
-module_param(irq, int, 0400);
-MODULE_PARM_DESC(irq, "IRQ number");
-
-#endif /* CONFIG_ISA */
-
#ifndef SMC_NOWAIT
# define SMC_NOWAIT 0
#endif
@@ -2314,15 +2287,6 @@
static int __init smc_init(void)
{
-#ifdef MODULE
-#ifdef CONFIG_ISA
- if (io == -1)
- printk(KERN_WARNING
- "%s: You shouldn't use auto-probing with insmod!\n",
- CARDNAME);
-#endif
-#endif
-
return platform_driver_register(&smc_driver);
}
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index f6d6379..3e7c6a3 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -265,19 +265,6 @@
#define SMC_IRQ_FLAGS (0)
-#elif defined(CONFIG_ISA)
-
-#define SMC_CAN_USE_8BIT 1
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 0
-
-#define SMC_inb(a, r) inb((a) + (r))
-#define SMC_inw(a, r) inw((a) + (r))
-#define SMC_outb(v, a, r) outb(v, (a) + (r))
-#define SMC_outw(v, a, r) outw(v, (a) + (r))
-#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
-
#elif defined(CONFIG_M32R)
#define SMC_CAN_USE_8BIT 0