netdev/fec: fix ifconfig eth0 down hang issue
BugLink: http://bugs.launchpad.net/bugs/559065
In fec open/close function, we need to use phy_connect and phy_disconnect
operation before we start/stop phy. Otherwise it will cause system hang.
Only call fec_enet_mii_probe() in open function, because the first open
action will cause NULL pointer error.
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 326465f..ddf7a86 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -681,6 +681,8 @@
struct phy_device *phy_dev = NULL;
int phy_addr;
+ fep->phy_dev = NULL;
+
/* find the first phy */
for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
if (fep->mii_bus->phy_map[phy_addr]) {
@@ -711,6 +713,11 @@
fep->link = 0;
fep->full_duplex = 0;
+ printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] "
+ "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
+ fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
+ fep->phy_dev->irq);
+
return 0;
}
@@ -756,13 +763,8 @@
if (mdiobus_register(fep->mii_bus))
goto err_out_free_mdio_irq;
- if (fec_enet_mii_probe(dev) != 0)
- goto err_out_unregister_bus;
-
return 0;
-err_out_unregister_bus:
- mdiobus_unregister(fep->mii_bus);
err_out_free_mdio_irq:
kfree(fep->mii_bus->irq);
err_out_free_mdiobus:
@@ -915,7 +917,12 @@
if (ret)
return ret;
- /* schedule a link state check */
+ /* Probe and connect to PHY when open the interface */
+ ret = fec_enet_mii_probe(dev);
+ if (ret) {
+ fec_enet_free_buffers(dev);
+ return ret;
+ }
phy_start(fep->phy_dev);
netif_start_queue(dev);
fep->opened = 1;
@@ -929,10 +936,12 @@
/* Don't know what to do yet. */
fep->opened = 0;
- phy_stop(fep->phy_dev);
netif_stop_queue(dev);
fec_stop(dev);
+ if (fep->phy_dev)
+ phy_disconnect(fep->phy_dev);
+
fec_enet_free_buffers(dev);
return 0;
@@ -1316,11 +1325,6 @@
if (ret)
goto failed_register;
- printk(KERN_INFO "%s: Freescale FEC PHY driver [%s] "
- "(mii_bus:phy_addr=%s, irq=%d)\n", ndev->name,
- fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev),
- fep->phy_dev->irq);
-
return 0;
failed_register: