qlcnic: NIC Partitioning - Add basic infrastructure support
Following changes have been added to enable the adapter to work in
NIC partitioning mode where multiple PCI functions of an adapter port can
be configured to work as NIC functions. The first function that is enumerated on
the PCI bus assumes the role of management function which, besides being able
to do all the NIC functionality, can configure other NIC partitions. Other NIC
functions can be configured as privileged or non privileged functions.
Privileged function can not configure other NIC functions but can do all the
NIC functionality including any firmware initialization, chip reset etc. Non
privileged functions can do only basic IO. For chip reset etc, it depends on the
privilege or management function.
1. Added code to determine PCI function number independent of kernel API.
2. Added Driver - FW version 2.0 support.
3. Changed producer and consumer register offset calculation.
4. Added management and privileged operation modes for npar functions. A module
parameter has been added to control it.
5. Added support for configuring the eswitch in the adapter.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 23ea9ca..1e5e66f 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -65,6 +65,10 @@
module_param(load_fw_file, int, 0644);
MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file");
+static int qlcnic_config_npars;
+module_param(qlcnic_config_npars, int, 0644);
+MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled");
+
static int __devinit qlcnic_probe(struct pci_dev *pdev,
const struct pci_device_id *ent);
static void __devexit qlcnic_remove(struct pci_dev *pdev);
@@ -307,19 +311,14 @@
static int
qlcnic_read_mac_addr(struct qlcnic_adapter *adapter)
{
- int i;
- unsigned char *p;
- u64 mac_addr;
+ u8 mac_addr[ETH_ALEN];
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
- if (qlcnic_get_mac_addr(adapter, &mac_addr) != 0)
+ if (adapter->nic_ops->get_mac_addr(adapter, mac_addr) != 0)
return -EIO;
- p = (unsigned char *)&mac_addr;
- for (i = 0; i < 6; i++)
- netdev->dev_addr[i] = *(p + 5 - i);
-
+ memcpy(netdev->dev_addr, mac_addr, ETH_ALEN);
memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
memcpy(adapter->mac_addr, netdev->dev_addr, netdev->addr_len);
@@ -371,6 +370,22 @@
#endif
};
+static struct qlcnic_nic_template qlcnic_ops = {
+ .get_mac_addr = qlcnic_get_mac_addr,
+ .config_bridged_mode = qlcnic_config_bridged_mode,
+ .config_led = qlcnic_config_led,
+ .set_ilb_mode = qlcnic_set_ilb_mode,
+ .clear_ilb_mode = qlcnic_clear_ilb_mode
+};
+
+static struct qlcnic_nic_template qlcnic_pf_ops = {
+ .get_mac_addr = qlcnic_get_mac_address,
+ .config_bridged_mode = qlcnic_config_bridged_mode,
+ .config_led = qlcnic_config_led,
+ .set_ilb_mode = qlcnic_set_ilb_mode,
+ .clear_ilb_mode = qlcnic_clear_ilb_mode
+};
+
static void
qlcnic_setup_intr(struct qlcnic_adapter *adapter)
{
@@ -452,6 +467,125 @@
iounmap(adapter->ahw.pci_base0);
}
+/* Use api lock to access this function */
+static int
+qlcnic_set_function_modes(struct qlcnic_adapter *adapter)
+{
+ u8 id;
+ u32 ref_count;
+ int i, ret = 1;
+ u32 data = QLCNIC_MGMT_FUNC;
+ void __iomem *priv_op = adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE;
+
+ /* If other drivers are not in use set their privilege level */
+ ref_count = QLCRD32(adapter, QLCNIC_CRB_DEV_REF_COUNT);
+ ret = qlcnic_api_lock(adapter);
+ if (ret)
+ goto err_lock;
+ if (QLC_DEV_CLR_REF_CNT(ref_count, adapter->ahw.pci_func))
+ goto err_npar;
+
+ for (i = 0; i < QLCNIC_MAX_PCI_FUNC; i++) {
+ id = adapter->npars[i].id;
+ if (adapter->npars[i].type != QLCNIC_TYPE_NIC ||
+ id == adapter->ahw.pci_func)
+ continue;
+ data |= (qlcnic_config_npars & QLC_DEV_SET_DRV(0xf, id));
+ }
+ writel(data, priv_op);
+
+err_npar:
+ qlcnic_api_unlock(adapter);
+err_lock:
+ return ret;
+}
+
+static u8
+qlcnic_set_mgmt_driver(struct qlcnic_adapter *adapter)
+{
+ u8 i, ret = 0;
+
+ if (qlcnic_get_pci_info(adapter))
+ return ret;
+ /* Set the eswitch */
+ for (i = 0; i < QLCNIC_NIU_MAX_XG_PORTS; i++) {
+ if (!qlcnic_get_eswitch_capabilities(adapter, i,
+ &adapter->eswitch[i])) {
+ ret++;
+ qlcnic_toggle_eswitch(adapter, i, ret);
+ }
+ }
+ return ret;
+}
+
+static u32
+qlcnic_get_driver_mode(struct qlcnic_adapter *adapter)
+{
+ void __iomem *msix_base_addr;
+ void __iomem *priv_op;
+ u32 func;
+ u32 msix_base;
+ u32 op_mode, priv_level;
+
+ /* Determine FW API version */
+ adapter->fw_hal_version = readl(adapter->ahw.pci_base0 + QLCNIC_FW_API);
+ if (adapter->fw_hal_version == ~0) {
+ adapter->nic_ops = &qlcnic_ops;
+ adapter->fw_hal_version = QLCNIC_FW_BASE;
+ adapter->ahw.pci_func = PCI_FUNC(adapter->pdev->devfn);
+ dev_info(&adapter->pdev->dev,
+ "FW does not support nic partion\n");
+ return adapter->fw_hal_version;
+ }
+
+ /* Find PCI function number */
+ pci_read_config_dword(adapter->pdev, QLCNIC_MSIX_TABLE_OFFSET, &func);
+ msix_base_addr = adapter->ahw.pci_base0 + QLCNIC_MSIX_BASE;
+ msix_base = readl(msix_base_addr);
+ func = (func - msix_base)/QLCNIC_MSIX_TBL_PGSIZE;
+ adapter->ahw.pci_func = func;
+
+ /* Determine function privilege level */
+ priv_op = adapter->ahw.pci_base0 + QLCNIC_DRV_OP_MODE;
+ op_mode = readl(priv_op);
+ if (op_mode == QLC_DEV_DRV_DEFAULT) {
+ priv_level = QLCNIC_MGMT_FUNC;
+ if (qlcnic_api_lock(adapter))
+ return 0;
+ op_mode = (op_mode & ~QLC_DEV_SET_DRV(0xf, func)) |
+ (QLC_DEV_SET_DRV(QLCNIC_MGMT_FUNC, func));
+ writel(op_mode, priv_op);
+ qlcnic_api_unlock(adapter);
+
+ } else
+ priv_level = QLC_DEV_GET_DRV(op_mode, adapter->ahw.pci_func);
+
+ switch (priv_level) {
+ case QLCNIC_MGMT_FUNC:
+ adapter->op_mode = QLCNIC_MGMT_FUNC;
+ adapter->nic_ops = &qlcnic_pf_ops;
+ /* Set privilege level for other functions */
+ if (qlcnic_config_npars)
+ qlcnic_set_function_modes(adapter);
+ dev_info(&adapter->pdev->dev,
+ "HAL Version: %d, Management function\n",
+ adapter->fw_hal_version);
+ break;
+ case QLCNIC_PRIV_FUNC:
+ adapter->op_mode = QLCNIC_PRIV_FUNC;
+ dev_info(&adapter->pdev->dev,
+ "HAL Version: %d, Privileged function\n",
+ adapter->fw_hal_version);
+ adapter->nic_ops = &qlcnic_pf_ops;
+ break;
+ default:
+ dev_info(&adapter->pdev->dev, "Unknown function mode: %d\n",
+ priv_level);
+ return 0;
+ }
+ return adapter->fw_hal_version;
+}
+
static int
qlcnic_setup_pci_map(struct qlcnic_adapter *adapter)
{
@@ -460,7 +594,6 @@
unsigned long mem_len, pci_len0 = 0;
struct pci_dev *pdev = adapter->pdev;
- int pci_func = adapter->ahw.pci_func;
/* remap phys address */
mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */
@@ -483,8 +616,13 @@
adapter->ahw.pci_base0 = mem_ptr0;
adapter->ahw.pci_len0 = pci_len0;
+ if (!qlcnic_get_driver_mode(adapter)) {
+ iounmap(adapter->ahw.pci_base0);
+ return -EIO;
+ }
+
adapter->ahw.ocm_win_crb = qlcnic_get_ioaddr(adapter,
- QLCNIC_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(pci_func)));
+ QLCNIC_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(adapter->ahw.pci_func)));
return 0;
}
@@ -553,7 +691,10 @@
dev_info(&pdev->dev, "firmware v%d.%d.%d\n",
fw_major, fw_minor, fw_build);
- adapter->capabilities = QLCRD32(adapter, CRB_FW_CAPABILITIES_1);
+ if (adapter->fw_hal_version == QLCNIC_FW_NPAR)
+ qlcnic_get_nic_info(adapter, adapter->ahw.pci_func);
+ else
+ adapter->capabilities = QLCRD32(adapter, CRB_FW_CAPABILITIES_1);
adapter->flags &= ~QLCNIC_LRO_ENABLED;
@@ -633,6 +774,10 @@
qlcnic_check_options(adapter);
+ if (adapter->fw_hal_version != QLCNIC_FW_BASE &&
+ adapter->op_mode == QLCNIC_MGMT_FUNC)
+ qlcnic_set_mgmt_driver(adapter);
+
adapter->need_fw_reset = 0;
qlcnic_release_firmware(adapter);
@@ -977,12 +1122,11 @@
SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_ops);
- netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
- netdev->features |= (NETIF_F_GRO);
- netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+ netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM | NETIF_F_GRO | NETIF_F_TSO | NETIF_F_TSO6);
- netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
- netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+ netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM | NETIF_F_TSO | NETIF_F_TSO6);
if (pci_using_dac) {
netdev->features |= NETIF_F_HIGHDMA;
@@ -1036,7 +1180,6 @@
struct net_device *netdev = NULL;
struct qlcnic_adapter *adapter = NULL;
int err;
- int pci_func_id = PCI_FUNC(pdev->devfn);
uint8_t revision_id;
uint8_t pci_using_dac;
@@ -1072,7 +1215,6 @@
adapter->netdev = netdev;
adapter->pdev = pdev;
adapter->dev_rst_time = jiffies;
- adapter->ahw.pci_func = pci_func_id;
revision_id = pdev->revision;
adapter->ahw.revision_id = revision_id;
@@ -1088,7 +1230,7 @@
goto err_out_free_netdev;
/* This will be reset for mezz cards */
- adapter->portnum = pci_func_id;
+ adapter->portnum = adapter->ahw.pci_func;
err = qlcnic_get_board_info(adapter);
if (err) {
@@ -1175,6 +1317,11 @@
qlcnic_detach(adapter);
+ if (adapter->npars != NULL)
+ kfree(adapter->npars);
+ if (adapter->eswitch != NULL)
+ kfree(adapter->eswitch);
+
qlcnic_clr_all_drv_state(adapter);
clear_bit(__QLCNIC_RESETTING, &adapter->state);
@@ -1340,11 +1487,11 @@
u8 opcode = TX_ETHER_PKT;
__be16 protocol = skb->protocol;
u16 flags = 0, vid = 0;
- u32 producer;
int copied, offset, copy_len, hdr_len = 0, tso = 0, vlan_oob = 0;
struct cmd_desc_type0 *hwdesc;
struct vlan_ethhdr *vh;
struct qlcnic_adapter *adapter = netdev_priv(netdev);
+ u32 producer = tx_ring->producer;
if (protocol == cpu_to_be16(ETH_P_8021Q)) {
@@ -1360,6 +1507,11 @@
vlan_oob = 1;
}
+ if (*(skb->data) & BIT_0) {
+ flags |= BIT_0;
+ memcpy(&first_desc->eth_addr, skb->data, ETH_ALEN);
+ }
+
if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
skb_shinfo(skb)->gso_size > 0) {
@@ -1409,7 +1561,6 @@
/* For LSO, we need to copy the MAC/IP/TCP headers into
* the descriptor ring
*/
- producer = tx_ring->producer;
copied = 0;
offset = 2;
@@ -2382,7 +2533,7 @@
if (strict_strtoul(buf, 2, &new))
goto err_out;
- if (!qlcnic_config_bridged_mode(adapter, !!new))
+ if (!adapter->nic_ops->config_bridged_mode(adapter, !!new))
ret = len;
err_out: