[POWERPC] mpc5200: make dts files conform to generic names recommended practice
Modify mpc5200 dts files to match Open Firmware's Generic Names recommended
practice.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 58c9799..c86464f 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -10,12 +10,6 @@
* option) any later version.
*/
-/*
- * WARNING: Do not depend on this tree layout remaining static just yet.
- * The MPC5200 device tree conventions are still in flux
- * Keep an eye on the linuxppc-dev mailing list for more details
- */
-
/ {
model = "tqc,tqm5200";
compatible = "tqc,tqm5200";
@@ -47,29 +41,26 @@
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
- model = "fsl,mpc5200";
- compatible = "fsl,mpc5200";
- revision = ""; // from bootloader
- device_type = "soc";
+ compatible = "fsl,mpc5200-immr";
ranges = <0 f0000000 0000c000>;
reg = <f0000000 00000100>;
bus-frequency = <0>; // from bootloader
system-frequency = <0>; // from bootloader
cdm@200 {
- compatible = "mpc5200-cdm";
+ compatible = "fsl,mpc5200-cdm";
reg = <200 38>;
};
- mpc5200_pic: pic@500 {
+ mpc5200_pic: interrupt-controller@500 {
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
- compatible = "mpc5200-pic";
+ compatible = "fsl,mpc5200-pic";
reg = <500 80>;
};
- gpt@600 { // General Purpose Timer
+ timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200-gpt";
reg = <600 10>;
interrupts = <1 9 0>;
@@ -78,21 +69,21 @@
};
gpio@b00 {
- compatible = "mpc5200-gpio";
+ compatible = "fsl,mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
- compatible = "mpc5200-ohci","ohci-be";
+ compatible = "fsl,mpc5200-ohci","ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
- compatible = "mpc5200-bestcomm";
+ compatible = "fsl,mpc5200-bestcomm";
reg = <1200 80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
@@ -102,13 +93,13 @@
};
xlb@1f00 {
- compatible = "mpc5200-xlb";
+ compatible = "fsl,mpc5200-xlb";
reg = <1f00 100>;
};
serial@2000 { // PSC1
device_type = "serial";
- compatible = "mpc5200-psc-uart";
+ compatible = "fsl,mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
reg = <2000 100>;
interrupts = <2 1 0>;
@@ -117,7 +108,7 @@
serial@2200 { // PSC2
device_type = "serial";
- compatible = "mpc5200-psc-uart";
+ compatible = "fsl,mpc5200-psc-uart";
port-number = <1>; // Logical port assignment
reg = <2200 100>;
interrupts = <2 2 0>;
@@ -126,7 +117,7 @@
serial@2400 { // PSC3
device_type = "serial";
- compatible = "mpc5200-psc-uart";
+ compatible = "fsl,mpc5200-psc-uart";
port-number = <2>; // Logical port assignment
reg = <2400 100>;
interrupts = <2 3 0>;
@@ -135,22 +126,22 @@
ethernet@3000 {
device_type = "network";
- compatible = "mpc5200-fec";
+ compatible = "fsl,mpc5200-fec";
reg = <3000 800>;
- local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
+ local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
};
ata@3a00 {
- compatible = "mpc5200-ata";
+ compatible = "fsl,mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
i2c@3d40 {
- compatible = "mpc5200-i2c","fsl-i2c";
+ compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <&mpc5200_pic>;
@@ -158,7 +149,7 @@
};
sram@8000 {
- compatible = "mpc5200-sram";
+ compatible = "fsl,mpc5200-sram";
reg = <8000 4000>;
};
};