Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-ppc/reg.h b/include/asm-ppc/reg.h
new file mode 100644
index 0000000..3372dee
--- /dev/null
+++ b/include/asm-ppc/reg.h
@@ -0,0 +1,444 @@
+/*
+ * Contains the definition of registers common to all PowerPC variants.
+ * If a register definition has been changed in a different PowerPC
+ * variant, we will case it in #ifndef XXX ... #endif, and have the
+ * number used in the Programming Environments Manual For 32-Bit
+ * Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_REGS_H__
+#define __ASM_PPC_REGS_H__
+
+#include <linux/stringify.h>
+
+/* Pickup Book E specific registers. */
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include <asm/reg_booke.h>
+#endif
+
+/* Machine State Register (MSR) Fields */
+#define MSR_SF (1<<63)
+#define MSR_ISF (1<<61)
+#define MSR_VEC (1<<25) /* Enable AltiVec */
+#define MSR_POW (1<<18) /* Enable Power Management */
+#define MSR_WE (1<<18) /* Wait State Enable */
+#define MSR_TGPR (1<<17) /* TLB Update registers in use */
+#define MSR_CE (1<<17) /* Critical Interrupt Enable */
+#define MSR_ILE (1<<16) /* Interrupt Little Endian */
+#define MSR_EE (1<<15) /* External Interrupt Enable */
+#define MSR_PR (1<<14) /* Problem State / Privilege Level */
+#define MSR_FP (1<<13) /* Floating Point enable */
+#define MSR_ME (1<<12) /* Machine Check Enable */
+#define MSR_FE0 (1<<11) /* Floating Exception mode 0 */
+#define MSR_SE (1<<10) /* Single Step */
+#define MSR_BE (1<<9) /* Branch Trace */
+#define MSR_DE (1<<9) /* Debug Exception Enable */
+#define MSR_FE1 (1<<8) /* Floating Exception mode 1 */
+#define MSR_IP (1<<6) /* Exception prefix 0x000/0xFFF */
+#define MSR_IR (1<<5) /* Instruction Relocate */
+#define MSR_DR (1<<4) /* Data Relocate */
+#define MSR_PE (1<<3) /* Protection Enable */
+#define MSR_PX (1<<2) /* Protection Exclusive Mode */
+#define MSR_RI (1<<1) /* Recoverable Exception */
+#define MSR_LE (1<<0) /* Little Endian */
+
+/* Default MSR for kernel mode. */
+#ifdef CONFIG_APUS_FAST_EXCEPT
+#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR)
+#endif
+
+#ifndef MSR_KERNEL
+#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
+#endif
+
+#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
+
+/* Floating Point Status and Control Register (FPSCR) Fields */
+#define FPSCR_FX 0x80000000 /* FPU exception summary */
+#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */
+#define FPSCR_VX 0x20000000 /* Invalid operation summary */
+#define FPSCR_OX 0x10000000 /* Overflow exception summary */
+#define FPSCR_UX 0x08000000 /* Underflow exception summary */
+#define FPSCR_ZX 0x04000000 /* Zero-devide exception summary */
+#define FPSCR_XX 0x02000000 /* Inexact exception summary */
+#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */
+#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */
+#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */
+#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */
+#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */
+#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */
+#define FPSCR_FR 0x00040000 /* Fraction rounded */
+#define FPSCR_FI 0x00020000 /* Fraction inexact */
+#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */
+#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */
+#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */
+#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */
+#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */
+#define FPSCR_VE 0x00000080 /* Invalid op exception enable */
+#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */
+#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */
+#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */
+#define FPSCR_XE 0x00000008 /* FP inexact exception enable */
+#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */
+#define FPSCR_RN 0x00000003 /* FPU rounding control */
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_CTR 0x009 /* Count Register */
+#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
+#define SPRN_DAR 0x013 /* Data Address Register */
+#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */
+#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */
+#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */
+#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */
+#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
+#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
+#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
+#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
+#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */
+#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */
+#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */
+#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */
+#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */
+#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */
+#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */
+#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */
+#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */
+#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */
+#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */
+#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */
+#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */
+
+#define SPRN_DEC 0x016 /* Decrement Register */
+#define SPRN_DER 0x095 /* Debug Enable Regsiter */
+#define DER_RSTE 0x40000000 /* Reset Interrupt */
+#define DER_CHSTPE 0x20000000 /* Check Stop */
+#define DER_MCIE 0x10000000 /* Machine Check Interrupt */
+#define DER_EXTIE 0x02000000 /* External Interrupt */
+#define DER_ALIE 0x01000000 /* Alignment Interrupt */
+#define DER_PRIE 0x00800000 /* Program Interrupt */
+#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */
+#define DER_DECIE 0x00200000 /* Decrementer Interrupt */
+#define DER_SYSIE 0x00040000 /* System Call Interrupt */
+#define DER_TRE 0x00020000 /* Trace Interrupt */
+#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */
+#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */
+#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */
+#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */
+#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */
+#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */
+#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */
+#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */
+#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */
+#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
+#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
+#define SPRN_EAR 0x11A /* External Address Register */
+#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
+#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
+#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
+#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
+#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
+#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
+#define HID0_SBCLK (1<<27)
+#define HID0_EICE (1<<26)
+#define HID0_TBEN (1<<26) /* Timebase enable - 745x */
+#define HID0_ECLK (1<<25)
+#define HID0_PAR (1<<24)
+#define HID0_STEN (1<<24) /* Software table search enable - 745x */
+#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */
+#define HID0_DOZE (1<<23)
+#define HID0_NAP (1<<22)
+#define HID0_SLEEP (1<<21)
+#define HID0_DPM (1<<20)
+#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */
+#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */
+#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/
+#define HID0_ICE (1<<15) /* Instruction Cache Enable */
+#define HID0_DCE (1<<14) /* Data Cache Enable */
+#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
+#define HID0_DLOCK (1<<12) /* Data Cache Lock */
+#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
+#define HID0_DCI (1<<10) /* Data Cache Invalidate */
+#define HID0_SPD (1<<9) /* Speculative disable */
+#define HID0_SGE (1<<7) /* Store Gathering Enable */
+#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
+#define HID0_DFCA (1<<6) /* Data Cache Flush Assist */
+#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
+#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
+#define HID0_ABE (1<<3) /* Address Broadcast Enable */
+#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */
+#define HID0_BHTE (1<<2) /* Branch History Table Enable */
+#define HID0_BTCD (1<<1) /* Branch target cache disable */
+#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */
+#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */
+
+#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
+#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */
+#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */
+#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */
+#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */
+#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */
+#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */
+#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */
+#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */
+#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */
+#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
+#define SPRN_HID4 0x3F4 /* 970 HID4 */
+#define SPRN_HID5 0x3F6 /* 970 HID5 */
+#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
+#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
+#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
+#endif
+#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
+#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
+#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
+#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */
+#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */
+#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */
+#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */
+#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */
+#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */
+#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */
+#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */
+#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */
+#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */
+#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */
+#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */
+#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */
+#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
+#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
+#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */
+#define ICTRL_EICE 0x08000000 /* enable icache parity errs */
+#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */
+#define ICTRL_EICP 0x00000100 /* enable icache par. check */
+#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
+#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
+#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
+#define SPRN_L2CR2 0x3f8
+#define L2CR_L2E 0x80000000 /* L2 enable */
+#define L2CR_L2PE 0x40000000 /* L2 parity enable */
+#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */
+#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */
+#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */
+#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */
+#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */
+#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */
+#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */
+#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */
+#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */
+#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */
+#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */
+#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */
+#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */
+#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */
+#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */
+#define L2CR_L2DO 0x00400000 /* L2 data only */
+#define L2CR_L2I 0x00200000 /* L2 global invalidate */
+#define L2CR_L2CTL 0x00100000 /* L2 RAM control */
+#define L2CR_L2WT 0x00080000 /* L2 write-through */
+#define L2CR_L2TS 0x00040000 /* L2 test support */
+#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */
+#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */
+#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */
+#define L2CR_L2SL 0x00008000 /* L2 DLL slow */
+#define L2CR_L2DF 0x00004000 /* L2 differential clock */
+#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */
+#define L2CR_L2IP 0x00000001 /* L2 GI in progress */
+#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */
+#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */
+#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */
+#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */
+#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */
+#define L3CR_L3E 0x80000000 /* L3 enable */
+#define L3CR_L3PE 0x40000000 /* L3 data parity enable */
+#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */
+#define L3CR_L3SIZ 0x10000000 /* L3 size */
+#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */
+#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */
+#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */
+#define L3CR_L3IO 0x00400000 /* L3 instruction only */
+#define L3CR_L3SPO 0x00040000 /* L3 sample point override */
+#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */
+#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */
+#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */
+#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */
+#define L3CR_L3I 0x00000400 /* L3 global invalidate */
+#define L3CR_L3RT 0x00000300 /* L3 SRAM type */
+#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */
+#define L3CR_L3DO 0x00000040 /* L3 data only mode */
+#define L3CR_PMEN 0x00000004 /* L3 private memory enable */
+#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */
+#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */
+#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */
+#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */
+#define SPRN_LDSTDB 0x3f4 /* */
+#define SPRN_LR 0x008 /* Link Register */
+#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */
+#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */
+#ifndef SPRN_PIR
+#define SPRN_PIR 0x3FF /* Processor Identification Register */
+#endif
+#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */
+#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
+#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */
+#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
+#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */
+#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */
+#define SPRN_PVR 0x11F /* Processor Version Register */
+#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
+#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
+#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
+#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
+#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
+#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
+#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
+#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
+#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */
+#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */
+#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */
+#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */
+#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
+#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
+#ifndef SPRN_SVR
+#define SPRN_SVR 0x11E /* System Version Register */
+#endif
+#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
+/* these bits were defined in inverted endian sense originally, ugh, confusing */
+#define THRM1_TIN (1 << 31)
+#define THRM1_TIV (1 << 30)
+#define THRM1_THRES(x) ((x&0x7f)<<23)
+#define THRM3_SITV(x) ((x&0x3fff)<<1)
+#define THRM1_TID (1<<2)
+#define THRM1_TIE (1<<1)
+#define THRM1_V (1<<0)
+#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
+#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
+#define THRM3_E (1<<0)
+#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */
+#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
+#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
+#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */
+#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */
+#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */
+#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */
+#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
+#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */
+#define SPRN_XER 0x001 /* Fixed Point Exception Register */
+
+/* Bit definitions for MMCR0 and PMC1 / PMC2. */
+#define MMCR0_PMC1_CYCLES (1 << 7)
+#define MMCR0_PMC1_ICACHEMISS (5 << 7)
+#define MMCR0_PMC1_DTLB (6 << 7)
+#define MMCR0_PMC2_DCACHEMISS 0x6
+#define MMCR0_PMC2_CYCLES 0x1
+#define MMCR0_PMC2_ITLB 0x7
+#define MMCR0_PMC2_LOADMISSTIME 0x5
+#define MMCR0_PMXE (1 << 26)
+
+/* Processor Version Register */
+
+/* Processor Version Register (PVR) field extraction */
+
+#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
+#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
+
+/*
+ * IBM has further subdivided the standard PowerPC 16-bit version and
+ * revision subfields of the PVR for the PowerPC 403s into the following:
+ */
+
+#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */
+#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */
+#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */
+#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */
+#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */
+#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */
+
+/* Processor Version Numbers */
+
+#define PVR_403GA 0x00200000
+#define PVR_403GB 0x00200100
+#define PVR_403GC 0x00200200
+#define PVR_403GCX 0x00201400
+#define PVR_405GP 0x40110000
+#define PVR_STB03XXX 0x40310000
+#define PVR_NP405H 0x41410000
+#define PVR_NP405L 0x41610000
+#define PVR_440GP_RB 0x40120440
+#define PVR_440GP_RC1 0x40120481
+#define PVR_440GP_RC2 0x40200481
+#define PVR_440GX_RA 0x51b21850
+#define PVR_440GX_RB 0x51b21851
+#define PVR_440GX_RC 0x51b21892
+#define PVR_601 0x00010000
+#define PVR_602 0x00050000
+#define PVR_603 0x00030000
+#define PVR_603e 0x00060000
+#define PVR_603ev 0x00070000
+#define PVR_603r 0x00071000
+#define PVR_604 0x00040000
+#define PVR_604e 0x00090000
+#define PVR_604r 0x000A0000
+#define PVR_620 0x00140000
+#define PVR_740 0x00080000
+#define PVR_750 PVR_740
+#define PVR_740P 0x10080000
+#define PVR_750P PVR_740P
+#define PVR_7400 0x000C0000
+#define PVR_7410 0x800C0000
+#define PVR_7450 0x80000000
+#define PVR_8540 0x80200000
+#define PVR_8560 0x80200000
+/*
+ * For the 8xx processors, all of them report the same PVR family for
+ * the PowerPC core. The various versions of these processors must be
+ * differentiated by the version number in the Communication Processor
+ * Module (CPM).
+ */
+#define PVR_821 0x00500000
+#define PVR_823 PVR_821
+#define PVR_850 PVR_821
+#define PVR_860 PVR_821
+#define PVR_8240 0x00810100
+#define PVR_8245 0x80811014
+#define PVR_8260 PVR_8240
+
+#if 0
+/* Segment Registers */
+#define SR0 0
+#define SR1 1
+#define SR2 2
+#define SR3 3
+#define SR4 4
+#define SR5 5
+#define SR6 6
+#define SR7 7
+#define SR8 8
+#define SR9 9
+#define SR10 10
+#define SR11 11
+#define SR12 12
+#define SR13 13
+#define SR14 14
+#define SR15 15
+#endif
+
+/* Macros for setting and retrieving special purpose registers */
+#ifndef __ASSEMBLY__
+#define mfmsr() ({unsigned int rval; \
+ asm volatile("mfmsr %0" : "=r" (rval)); rval;})
+#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v))
+
+#define mfspr(rn) ({unsigned int rval; \
+ asm volatile("mfspr %0," __stringify(rn) \
+ : "=r" (rval)); rval;})
+#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+
+#define mfsrin(v) ({unsigned int rval; \
+ asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
+ rval;})
+
+#define proc_trap() asm volatile("trap")
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_PPC_REGS_H__ */
+#endif /* __KERNEL__ */