Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/drivers/acpi/executer/exstorob.c b/drivers/acpi/executer/exstorob.c
new file mode 100644
index 0000000..05e1eca
--- /dev/null
+++ b/drivers/acpi/executer/exstorob.c
@@ -0,0 +1,216 @@
+
+/******************************************************************************
+ *
+ * Module Name: exstorob - AML Interpreter object store support, store to object
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acinterp.h>
+
+
+#define _COMPONENT          ACPI_EXECUTER
+	 ACPI_MODULE_NAME    ("exstorob")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store_buffer_to_buffer
+ *
+ * PARAMETERS:  source_desc         - Source object to copy
+ *              target_desc         - Destination object of the copy
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Copy a buffer object to another buffer object.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_store_buffer_to_buffer (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *target_desc)
+{
+	u32                             length;
+	u8                              *buffer;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_store_buffer_to_buffer", source_desc);
+
+
+	/* We know that source_desc is a buffer by now */
+
+	buffer = (u8 *) source_desc->buffer.pointer;
+	length = source_desc->buffer.length;
+
+	/*
+	 * If target is a buffer of length zero or is a static buffer,
+	 * allocate a new buffer of the proper length
+	 */
+	if ((target_desc->buffer.length == 0) ||
+		(target_desc->common.flags & AOPOBJ_STATIC_POINTER)) {
+		target_desc->buffer.pointer = ACPI_MEM_ALLOCATE (length);
+		if (!target_desc->buffer.pointer) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		target_desc->buffer.length = length;
+	}
+
+	/* Copy source buffer to target buffer */
+
+	if (length <= target_desc->buffer.length) {
+		/* Clear existing buffer and copy in the new one */
+
+		ACPI_MEMSET (target_desc->buffer.pointer, 0, target_desc->buffer.length);
+		ACPI_MEMCPY (target_desc->buffer.pointer, buffer, length);
+
+#ifdef ACPI_OBSOLETE_BEHAVIOR
+		/*
+		 * NOTE: ACPI versions up to 3.0 specified that the buffer must be
+		 * truncated if the string is smaller than the buffer.  However, "other"
+		 * implementations of ACPI never did this and thus became the defacto
+		 * standard. ACPi 3.0_a changes this behavior such that the buffer
+		 * is no longer truncated.
+		 */
+
+		/*
+		 * OBSOLETE BEHAVIOR:
+		 * If the original source was a string, we must truncate the buffer,
+		 * according to the ACPI spec.  Integer-to-Buffer and Buffer-to-Buffer
+		 * copy must not truncate the original buffer.
+		 */
+		if (original_src_type == ACPI_TYPE_STRING) {
+			/* Set the new length of the target */
+
+			target_desc->buffer.length = length;
+		}
+#endif
+	}
+	else {
+		/* Truncate the source, copy only what will fit */
+
+		ACPI_MEMCPY (target_desc->buffer.pointer, buffer, target_desc->buffer.length);
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_INFO,
+			"Truncating source buffer from %X to %X\n",
+			length, target_desc->buffer.length));
+	}
+
+	/* Copy flags */
+
+	target_desc->buffer.flags = source_desc->buffer.flags;
+	target_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_store_string_to_string
+ *
+ * PARAMETERS:  source_desc         - Source object to copy
+ *              target_desc         - Destination object of the copy
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Copy a String object to another String object
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_store_string_to_string (
+	union acpi_operand_object       *source_desc,
+	union acpi_operand_object       *target_desc)
+{
+	u32                             length;
+	u8                              *buffer;
+
+
+	ACPI_FUNCTION_TRACE_PTR ("ex_store_string_to_string", source_desc);
+
+
+	/* We know that source_desc is a string by now */
+
+	buffer = (u8 *) source_desc->string.pointer;
+	length = source_desc->string.length;
+
+	/*
+	 * Replace existing string value if it will fit and the string
+	 * pointer is not a static pointer (part of an ACPI table)
+	 */
+	if ((length < target_desc->string.length) &&
+	   (!(target_desc->common.flags & AOPOBJ_STATIC_POINTER))) {
+		/*
+		 * String will fit in existing non-static buffer.
+		 * Clear old string and copy in the new one
+		 */
+		ACPI_MEMSET (target_desc->string.pointer, 0, (acpi_size) target_desc->string.length + 1);
+		ACPI_MEMCPY (target_desc->string.pointer, buffer, length);
+	}
+	else {
+		/*
+		 * Free the current buffer, then allocate a new buffer
+		 * large enough to hold the value
+		 */
+		if (target_desc->string.pointer &&
+		   (!(target_desc->common.flags & AOPOBJ_STATIC_POINTER))) {
+			/* Only free if not a pointer into the DSDT */
+
+			ACPI_MEM_FREE (target_desc->string.pointer);
+		}
+
+		target_desc->string.pointer = ACPI_MEM_CALLOCATE ((acpi_size) length + 1);
+		if (!target_desc->string.pointer) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		target_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
+		ACPI_MEMCPY (target_desc->string.pointer, buffer, length);
+	}
+
+	/* Set the new target length */
+
+	target_desc->string.length = length;
+	return_ACPI_STATUS (AE_OK);
+}
+
+