Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/acpi/dispatcher/dswload.c b/drivers/acpi/dispatcher/dswload.c
new file mode 100644
index 0000000..06d7586
--- /dev/null
+++ b/drivers/acpi/dispatcher/dswload.c
@@ -0,0 +1,976 @@
+/******************************************************************************
+ *
+ * Module Name: dswload - Dispatcher namespace load callbacks
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acevents.h>
+
+#ifdef _ACPI_ASL_COMPILER
+#include <acpi/acdisasm.h>
+#endif
+
+#define _COMPONENT ACPI_DISPATCHER
+ ACPI_MODULE_NAME ("dswload")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ds_init_callbacks
+ *
+ * PARAMETERS: walk_state - Current state of the parse tree walk
+ * pass_number - 1, 2, or 3
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Init walk state callbacks
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_init_callbacks (
+ struct acpi_walk_state *walk_state,
+ u32 pass_number)
+{
+
+ switch (pass_number) {
+ case 1:
+ walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | ACPI_PARSE_DELETE_TREE;
+ walk_state->descending_callback = acpi_ds_load1_begin_op;
+ walk_state->ascending_callback = acpi_ds_load1_end_op;
+ break;
+
+ case 2:
+ walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | ACPI_PARSE_DELETE_TREE;
+ walk_state->descending_callback = acpi_ds_load2_begin_op;
+ walk_state->ascending_callback = acpi_ds_load2_end_op;
+ break;
+
+ case 3:
+#ifndef ACPI_NO_METHOD_EXECUTION
+ walk_state->parse_flags |= ACPI_PARSE_EXECUTE | ACPI_PARSE_DELETE_TREE;
+ walk_state->descending_callback = acpi_ds_exec_begin_op;
+ walk_state->ascending_callback = acpi_ds_exec_end_op;
+#endif
+ break;
+
+ default:
+ return (AE_BAD_PARAMETER);
+ }
+
+ return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ds_load1_begin_op
+ *
+ * PARAMETERS: walk_state - Current state of the parse tree walk
+ * Op - Op that has been just been reached in the
+ * walk; Arguments have not been evaluated yet.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Descending callback used during the loading of ACPI tables.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load1_begin_op (
+ struct acpi_walk_state *walk_state,
+ union acpi_parse_object **out_op)
+{
+ union acpi_parse_object *op;
+ struct acpi_namespace_node *node;
+ acpi_status status;
+ acpi_object_type object_type;
+ char *path;
+ u32 flags;
+
+
+ ACPI_FUNCTION_NAME ("ds_load1_begin_op");
+
+
+ op = walk_state->op;
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, walk_state));
+
+ /* We are only interested in opcodes that have an associated name */
+
+ if (op) {
+ if (!(walk_state->op_info->flags & AML_NAMED)) {
+#if 0
+ if ((walk_state->op_info->class == AML_CLASS_EXECUTE) ||
+ (walk_state->op_info->class == AML_CLASS_CONTROL)) {
+ acpi_os_printf ("\n\n***EXECUTABLE OPCODE %s***\n\n", walk_state->op_info->name);
+ *out_op = op;
+ return (AE_CTRL_SKIP);
+ }
+#endif
+ *out_op = op;
+ return (AE_OK);
+ }
+
+ /* Check if this object has already been installed in the namespace */
+
+ if (op->common.node) {
+ *out_op = op;
+ return (AE_OK);
+ }
+ }
+
+ path = acpi_ps_get_next_namestring (&walk_state->parser_state);
+
+ /* Map the raw opcode into an internal object type */
+
+ object_type = walk_state->op_info->object_type;
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+ "State=%p Op=%p [%s]\n", walk_state, op, acpi_ut_get_type_name (object_type)));
+
+ switch (walk_state->opcode) {
+ case AML_SCOPE_OP:
+
+ /*
+ * The target name of the Scope() operator must exist at this point so
+ * that we can actually open the scope to enter new names underneath it.
+ * Allow search-to-root for single namesegs.
+ */
+ status = acpi_ns_lookup (walk_state->scope_info, path, object_type,
+ ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+#ifdef _ACPI_ASL_COMPILER
+ if (status == AE_NOT_FOUND) {
+ /*
+ * Table disassembly:
+ * Target of Scope() not found. Generate an External for it, and
+ * insert the name into the namespace.
+ */
+ acpi_dm_add_to_external_list (path);
+ status = acpi_ns_lookup (walk_state->scope_info, path, object_type,
+ ACPI_IMODE_LOAD_PASS1, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+ }
+#endif
+ if (ACPI_FAILURE (status)) {
+ ACPI_REPORT_NSERROR (path, status);
+ return (status);
+ }
+
+ /*
+ * Check to make sure that the target is
+ * one of the opcodes that actually opens a scope
+ */
+ switch (node->type) {
+ case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
+ case ACPI_TYPE_DEVICE:
+ case ACPI_TYPE_POWER:
+ case ACPI_TYPE_PROCESSOR:
+ case ACPI_TYPE_THERMAL:
+
+ /* These are acceptable types */
+ break;
+
+ case ACPI_TYPE_INTEGER:
+ case ACPI_TYPE_STRING:
+ case ACPI_TYPE_BUFFER:
+
+ /*
+ * These types we will allow, but we will change the type. This
+ * enables some existing code of the form:
+ *
+ * Name (DEB, 0)
+ * Scope (DEB) { ... }
+ *
+ * Note: silently change the type here. On the second pass, we will report a warning
+ */
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n",
+ path, acpi_ut_get_type_name (node->type)));
+
+ node->type = ACPI_TYPE_ANY;
+ walk_state->scope_info->common.value = ACPI_TYPE_ANY;
+ break;
+
+ default:
+
+ /* All other types are an error */
+
+ ACPI_REPORT_ERROR (("Invalid type (%s) for target of Scope operator [%4.4s] (Cannot override)\n",
+ acpi_ut_get_type_name (node->type), path));
+
+ return (AE_AML_OPERAND_TYPE);
+ }
+ break;
+
+
+ default:
+
+ /*
+ * For all other named opcodes, we will enter the name into the namespace.
+ *
+ * Setup the search flags.
+ * Since we are entering a name into the namespace, we do not want to
+ * enable the search-to-root upsearch.
+ *
+ * There are only two conditions where it is acceptable that the name
+ * already exists:
+ * 1) the Scope() operator can reopen a scoping object that was
+ * previously defined (Scope, Method, Device, etc.)
+ * 2) Whenever we are parsing a deferred opcode (op_region, Buffer,
+ * buffer_field, or Package), the name of the object is already
+ * in the namespace.
+ */
+ if (walk_state->deferred_node) {
+ /* This name is already in the namespace, get the node */
+
+ node = walk_state->deferred_node;
+ status = AE_OK;
+ break;
+ }
+
+ flags = ACPI_NS_NO_UPSEARCH;
+ if ((walk_state->opcode != AML_SCOPE_OP) &&
+ (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
+ flags |= ACPI_NS_ERROR_IF_FOUND;
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[%s] Cannot already exist\n",
+ acpi_ut_get_type_name (object_type)));
+ }
+ else {
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[%s] Both Find or Create allowed\n",
+ acpi_ut_get_type_name (object_type)));
+ }
+
+ /*
+ * Enter the named type into the internal namespace. We enter the name
+ * as we go downward in the parse tree. Any necessary subobjects that involve
+ * arguments to the opcode must be created as we go back up the parse tree later.
+ */
+ status = acpi_ns_lookup (walk_state->scope_info, path, object_type,
+ ACPI_IMODE_LOAD_PASS1, flags, walk_state, &(node));
+ if (ACPI_FAILURE (status)) {
+ ACPI_REPORT_NSERROR (path, status);
+ return (status);
+ }
+ break;
+ }
+
+
+ /* Common exit */
+
+ if (!op) {
+ /* Create a new op */
+
+ op = acpi_ps_alloc_op (walk_state->opcode);
+ if (!op) {
+ return (AE_NO_MEMORY);
+ }
+ }
+
+ /* Initialize */
+
+ op->named.name = node->name.integer;
+
+#if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
+ op->named.path = (u8 *) path;
+#endif
+
+
+ /*
+ * Put the Node in the "op" object that the parser uses, so we
+ * can get it again quickly when this scope is closed
+ */
+ op->common.node = node;
+ acpi_ps_append_arg (acpi_ps_get_parent_scope (&walk_state->parser_state), op);
+
+ *out_op = op;
+ return (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ds_load1_end_op
+ *
+ * PARAMETERS: walk_state - Current state of the parse tree walk
+ * Op - Op that has been just been completed in the
+ * walk; Arguments have now been evaluated.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Ascending callback used during the loading of the namespace,
+ * both control methods and everything else.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load1_end_op (
+ struct acpi_walk_state *walk_state)
+{
+ union acpi_parse_object *op;
+ acpi_object_type object_type;
+ acpi_status status = AE_OK;
+
+
+ ACPI_FUNCTION_NAME ("ds_load1_end_op");
+
+
+ op = walk_state->op;
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, walk_state));
+
+ /* We are only interested in opcodes that have an associated name */
+
+ if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
+ return (AE_OK);
+ }
+
+ /* Get the object type to determine if we should pop the scope */
+
+ object_type = walk_state->op_info->object_type;
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+ if (walk_state->op_info->flags & AML_FIELD) {
+ if (walk_state->opcode == AML_FIELD_OP ||
+ walk_state->opcode == AML_BANK_FIELD_OP ||
+ walk_state->opcode == AML_INDEX_FIELD_OP) {
+ status = acpi_ds_init_field_objects (op, walk_state);
+ }
+ return (status);
+ }
+
+
+ if (op->common.aml_opcode == AML_REGION_OP) {
+ status = acpi_ex_create_region (op->named.data, op->named.length,
+ (acpi_adr_space_type) ((op->common.value.arg)->common.value.integer), walk_state);
+ if (ACPI_FAILURE (status)) {
+ return (status);
+ }
+ }
+#endif
+
+ if (op->common.aml_opcode == AML_NAME_OP) {
+ /* For Name opcode, get the object type from the argument */
+
+ if (op->common.value.arg) {
+ object_type = (acpi_ps_get_opcode_info ((op->common.value.arg)->common.aml_opcode))->object_type;
+ op->common.node->type = (u8) object_type;
+ }
+ }
+
+ if (op->common.aml_opcode == AML_METHOD_OP) {
+ /*
+ * method_op pkg_length name_string method_flags term_list
+ *
+ * Note: We must create the method node/object pair as soon as we
+ * see the method declaration. This allows later pass1 parsing
+ * of invocations of the method (need to know the number of
+ * arguments.)
+ */
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+ "LOADING-Method: State=%p Op=%p named_obj=%p\n",
+ walk_state, op, op->named.node));
+
+ if (!acpi_ns_get_attached_object (op->named.node)) {
+ walk_state->operands[0] = (void *) op->named.node;
+ walk_state->num_operands = 1;
+
+ status = acpi_ds_create_operands (walk_state, op->common.value.arg);
+ if (ACPI_SUCCESS (status)) {
+ status = acpi_ex_create_method (op->named.data,
+ op->named.length, walk_state);
+ }
+ walk_state->operands[0] = NULL;
+ walk_state->num_operands = 0;
+
+ if (ACPI_FAILURE (status)) {
+ return (status);
+ }
+ }
+ }
+
+ /* Pop the scope stack */
+
+ if (acpi_ns_opens_scope (object_type)) {
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "(%s): Popping scope for Op %p\n",
+ acpi_ut_get_type_name (object_type), op));
+
+ status = acpi_ds_scope_stack_pop (walk_state);
+ }
+
+ return (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ds_load2_begin_op
+ *
+ * PARAMETERS: walk_state - Current state of the parse tree walk
+ * Op - Op that has been just been reached in the
+ * walk; Arguments have not been evaluated yet.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Descending callback used during the loading of ACPI tables.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load2_begin_op (
+ struct acpi_walk_state *walk_state,
+ union acpi_parse_object **out_op)
+{
+ union acpi_parse_object *op;
+ struct acpi_namespace_node *node;
+ acpi_status status;
+ acpi_object_type object_type;
+ char *buffer_ptr;
+
+
+ ACPI_FUNCTION_TRACE ("ds_load2_begin_op");
+
+
+ op = walk_state->op;
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, walk_state));
+
+ if (op) {
+ /* We only care about Namespace opcodes here */
+
+ if ((!(walk_state->op_info->flags & AML_NSOPCODE) && (walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
+ (!(walk_state->op_info->flags & AML_NAMED))) {
+ return_ACPI_STATUS (AE_OK);
+ }
+
+ /*
+ * Get the name we are going to enter or lookup in the namespace
+ */
+ if (walk_state->opcode == AML_INT_NAMEPATH_OP) {
+ /* For Namepath op, get the path string */
+
+ buffer_ptr = op->common.value.string;
+ if (!buffer_ptr) {
+ /* No name, just exit */
+
+ return_ACPI_STATUS (AE_OK);
+ }
+ }
+ else {
+ /* Get name from the op */
+
+ buffer_ptr = (char *) &op->named.name;
+ }
+ }
+ else {
+ /* Get the namestring from the raw AML */
+
+ buffer_ptr = acpi_ps_get_next_namestring (&walk_state->parser_state);
+ }
+
+ /* Map the opcode into an internal object type */
+
+ object_type = walk_state->op_info->object_type;
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+ "State=%p Op=%p Type=%X\n", walk_state, op, object_type));
+
+
+ switch (walk_state->opcode) {
+ case AML_FIELD_OP:
+ case AML_BANK_FIELD_OP:
+ case AML_INDEX_FIELD_OP:
+
+ node = NULL;
+ status = AE_OK;
+ break;
+
+ case AML_INT_NAMEPATH_OP:
+
+ /*
+ * The name_path is an object reference to an existing object. Don't enter the
+ * name into the namespace, but look it up for use later
+ */
+ status = acpi_ns_lookup (walk_state->scope_info, buffer_ptr, object_type,
+ ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+ break;
+
+ case AML_SCOPE_OP:
+
+ /*
+ * The Path is an object reference to an existing object. Don't enter the
+ * name into the namespace, but look it up for use later
+ */
+ status = acpi_ns_lookup (walk_state->scope_info, buffer_ptr, object_type,
+ ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+ if (ACPI_FAILURE (status)) {
+#ifdef _ACPI_ASL_COMPILER
+ if (status == AE_NOT_FOUND) {
+ status = AE_OK;
+ }
+ else {
+ ACPI_REPORT_NSERROR (buffer_ptr, status);
+ }
+#else
+ ACPI_REPORT_NSERROR (buffer_ptr, status);
+#endif
+ return_ACPI_STATUS (status);
+ }
+ /*
+ * We must check to make sure that the target is
+ * one of the opcodes that actually opens a scope
+ */
+ switch (node->type) {
+ case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
+ case ACPI_TYPE_DEVICE:
+ case ACPI_TYPE_POWER:
+ case ACPI_TYPE_PROCESSOR:
+ case ACPI_TYPE_THERMAL:
+
+ /* These are acceptable types */
+ break;
+
+ case ACPI_TYPE_INTEGER:
+ case ACPI_TYPE_STRING:
+ case ACPI_TYPE_BUFFER:
+
+ /*
+ * These types we will allow, but we will change the type. This
+ * enables some existing code of the form:
+ *
+ * Name (DEB, 0)
+ * Scope (DEB) { ... }
+ */
+
+ ACPI_REPORT_WARNING (("Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n",
+ buffer_ptr, acpi_ut_get_type_name (node->type)));
+
+ node->type = ACPI_TYPE_ANY;
+ walk_state->scope_info->common.value = ACPI_TYPE_ANY;
+ break;
+
+ default:
+
+ /* All other types are an error */
+
+ ACPI_REPORT_ERROR (("Invalid type (%s) for target of Scope operator [%4.4s]\n",
+ acpi_ut_get_type_name (node->type), buffer_ptr));
+
+ return (AE_AML_OPERAND_TYPE);
+ }
+ break;
+
+ default:
+
+ /* All other opcodes */
+
+ if (op && op->common.node) {
+ /* This op/node was previously entered into the namespace */
+
+ node = op->common.node;
+
+ if (acpi_ns_opens_scope (object_type)) {
+ status = acpi_ds_scope_stack_push (node, object_type, walk_state);
+ if (ACPI_FAILURE (status)) {
+ return_ACPI_STATUS (status);
+ }
+
+ }
+ return_ACPI_STATUS (AE_OK);
+ }
+
+ /*
+ * Enter the named type into the internal namespace. We enter the name
+ * as we go downward in the parse tree. Any necessary subobjects that involve
+ * arguments to the opcode must be created as we go back up the parse tree later.
+ *
+ * Note: Name may already exist if we are executing a deferred opcode.
+ */
+ if (walk_state->deferred_node) {
+ /* This name is already in the namespace, get the node */
+
+ node = walk_state->deferred_node;
+ status = AE_OK;
+ break;
+ }
+
+ status = acpi_ns_lookup (walk_state->scope_info, buffer_ptr, object_type,
+ ACPI_IMODE_EXECUTE, ACPI_NS_NO_UPSEARCH, walk_state, &(node));
+ break;
+ }
+
+ if (ACPI_FAILURE (status)) {
+ ACPI_REPORT_NSERROR (buffer_ptr, status);
+ return_ACPI_STATUS (status);
+ }
+
+
+ if (!op) {
+ /* Create a new op */
+
+ op = acpi_ps_alloc_op (walk_state->opcode);
+ if (!op) {
+ return_ACPI_STATUS (AE_NO_MEMORY);
+ }
+
+ /* Initialize the new op */
+
+ if (node) {
+ op->named.name = node->name.integer;
+ }
+ if (out_op) {
+ *out_op = op;
+ }
+ }
+
+ /*
+ * Put the Node in the "op" object that the parser uses, so we
+ * can get it again quickly when this scope is closed
+ */
+ op->common.node = node;
+
+ return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ds_load2_end_op
+ *
+ * PARAMETERS: walk_state - Current state of the parse tree walk
+ * Op - Op that has been just been completed in the
+ * walk; Arguments have now been evaluated.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Ascending callback used during the loading of the namespace,
+ * both control methods and everything else.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load2_end_op (
+ struct acpi_walk_state *walk_state)
+{
+ union acpi_parse_object *op;
+ acpi_status status = AE_OK;
+ acpi_object_type object_type;
+ struct acpi_namespace_node *node;
+ union acpi_parse_object *arg;
+ struct acpi_namespace_node *new_node;
+#ifndef ACPI_NO_METHOD_EXECUTION
+ u32 i;
+#endif
+
+
+ ACPI_FUNCTION_TRACE ("ds_load2_end_op");
+
+ op = walk_state->op;
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Opcode [%s] Op %p State %p\n",
+ walk_state->op_info->name, op, walk_state));
+
+ /* Only interested in opcodes that have namespace objects */
+
+ if (!(walk_state->op_info->flags & AML_NSOBJECT)) {
+ return_ACPI_STATUS (AE_OK);
+ }
+
+ if (op->common.aml_opcode == AML_SCOPE_OP) {
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+ "Ending scope Op=%p State=%p\n", op, walk_state));
+ }
+
+
+ object_type = walk_state->op_info->object_type;
+
+ /*
+ * Get the Node/name from the earlier lookup
+ * (It was saved in the *op structure)
+ */
+ node = op->common.node;
+
+ /*
+ * Put the Node on the object stack (Contains the ACPI Name of
+ * this object)
+ */
+ walk_state->operands[0] = (void *) node;
+ walk_state->num_operands = 1;
+
+ /* Pop the scope stack */
+
+ if (acpi_ns_opens_scope (object_type) && (op->common.aml_opcode != AML_INT_METHODCALL_OP)) {
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "(%s) Popping scope for Op %p\n",
+ acpi_ut_get_type_name (object_type), op));
+
+ status = acpi_ds_scope_stack_pop (walk_state);
+ if (ACPI_FAILURE (status)) {
+ goto cleanup;
+ }
+ }
+
+ /*
+ * Named operations are as follows:
+ *
+ * AML_ALIAS
+ * AML_BANKFIELD
+ * AML_CREATEBITFIELD
+ * AML_CREATEBYTEFIELD
+ * AML_CREATEDWORDFIELD
+ * AML_CREATEFIELD
+ * AML_CREATEQWORDFIELD
+ * AML_CREATEWORDFIELD
+ * AML_DATA_REGION
+ * AML_DEVICE
+ * AML_EVENT
+ * AML_FIELD
+ * AML_INDEXFIELD
+ * AML_METHOD
+ * AML_METHODCALL
+ * AML_MUTEX
+ * AML_NAME
+ * AML_NAMEDFIELD
+ * AML_OPREGION
+ * AML_POWERRES
+ * AML_PROCESSOR
+ * AML_SCOPE
+ * AML_THERMALZONE
+ */
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+ "Create-Load [%s] State=%p Op=%p named_obj=%p\n",
+ acpi_ps_get_opcode_name (op->common.aml_opcode), walk_state, op, node));
+
+ /* Decode the opcode */
+
+ arg = op->common.value.arg;
+
+ switch (walk_state->op_info->type) {
+#ifndef ACPI_NO_METHOD_EXECUTION
+
+ case AML_TYPE_CREATE_FIELD:
+
+ /*
+ * Create the field object, but the field buffer and index must
+ * be evaluated later during the execution phase
+ */
+ status = acpi_ds_create_buffer_field (op, walk_state);
+ break;
+
+
+ case AML_TYPE_NAMED_FIELD:
+
+ switch (op->common.aml_opcode) {
+ case AML_INDEX_FIELD_OP:
+
+ status = acpi_ds_create_index_field (op, (acpi_handle) arg->common.node,
+ walk_state);
+ break;
+
+ case AML_BANK_FIELD_OP:
+
+ status = acpi_ds_create_bank_field (op, arg->common.node, walk_state);
+ break;
+
+ case AML_FIELD_OP:
+
+ status = acpi_ds_create_field (op, arg->common.node, walk_state);
+ break;
+
+ default:
+ /* All NAMED_FIELD opcodes must be handled above */
+ break;
+ }
+ break;
+
+
+ case AML_TYPE_NAMED_SIMPLE:
+
+ status = acpi_ds_create_operands (walk_state, arg);
+ if (ACPI_FAILURE (status)) {
+ goto cleanup;
+ }
+
+ switch (op->common.aml_opcode) {
+ case AML_PROCESSOR_OP:
+
+ status = acpi_ex_create_processor (walk_state);
+ break;
+
+ case AML_POWER_RES_OP:
+
+ status = acpi_ex_create_power_resource (walk_state);
+ break;
+
+ case AML_MUTEX_OP:
+
+ status = acpi_ex_create_mutex (walk_state);
+ break;
+
+ case AML_EVENT_OP:
+
+ status = acpi_ex_create_event (walk_state);
+ break;
+
+ case AML_DATA_REGION_OP:
+
+ status = acpi_ex_create_table_region (walk_state);
+ break;
+
+ case AML_ALIAS_OP:
+
+ status = acpi_ex_create_alias (walk_state);
+ break;
+
+ default:
+ /* Unknown opcode */
+
+ status = AE_OK;
+ goto cleanup;
+ }
+
+ /* Delete operands */
+
+ for (i = 1; i < walk_state->num_operands; i++) {
+ acpi_ut_remove_reference (walk_state->operands[i]);
+ walk_state->operands[i] = NULL;
+ }
+
+ break;
+#endif /* ACPI_NO_METHOD_EXECUTION */
+
+ case AML_TYPE_NAMED_COMPLEX:
+
+ switch (op->common.aml_opcode) {
+#ifndef ACPI_NO_METHOD_EXECUTION
+ case AML_REGION_OP:
+ /*
+ * The op_region is not fully parsed at this time. Only valid argument is the space_id.
+ * (We must save the address of the AML of the address and length operands)
+ */
+ /*
+ * If we have a valid region, initialize it
+ * Namespace is NOT locked at this point.
+ */
+ status = acpi_ev_initialize_region (acpi_ns_get_attached_object (node), FALSE);
+ if (ACPI_FAILURE (status)) {
+ /*
+ * If AE_NOT_EXIST is returned, it is not fatal
+ * because many regions get created before a handler
+ * is installed for said region.
+ */
+ if (AE_NOT_EXIST == status) {
+ status = AE_OK;
+ }
+ }
+ break;
+
+
+ case AML_NAME_OP:
+
+ status = acpi_ds_create_node (walk_state, node, op);
+ break;
+#endif /* ACPI_NO_METHOD_EXECUTION */
+
+
+ default:
+ /* All NAMED_COMPLEX opcodes must be handled above */
+ /* Note: Method objects were already created in Pass 1 */
+ break;
+ }
+ break;
+
+
+ case AML_CLASS_INTERNAL:
+
+ /* case AML_INT_NAMEPATH_OP: */
+ break;
+
+
+ case AML_CLASS_METHOD_CALL:
+
+ ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+ "RESOLVING-method_call: State=%p Op=%p named_obj=%p\n",
+ walk_state, op, node));
+
+ /*
+ * Lookup the method name and save the Node
+ */
+ status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.string,
+ ACPI_TYPE_ANY, ACPI_IMODE_LOAD_PASS2,
+ ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE,
+ walk_state, &(new_node));
+ if (ACPI_SUCCESS (status)) {
+ /*
+ * Make sure that what we found is indeed a method
+ * We didn't search for a method on purpose, to see if the name would resolve
+ */
+ if (new_node->type != ACPI_TYPE_METHOD) {
+ status = AE_AML_OPERAND_TYPE;
+ }
+
+ /* We could put the returned object (Node) on the object stack for later, but
+ * for now, we will put it in the "op" object that the parser uses, so we
+ * can get it again at the end of this scope
+ */
+ op->common.node = new_node;
+ }
+ else {
+ ACPI_REPORT_NSERROR (arg->common.value.string, status);
+ }
+ break;
+
+
+ default:
+ break;
+ }
+
+cleanup:
+
+ /* Remove the Node pushed at the very beginning */
+
+ walk_state->operands[0] = NULL;
+ walk_state->num_operands = 0;
+ return_ACPI_STATUS (status);
+}
+
+