Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/mips/ite-boards/generic/Makefile b/arch/mips/ite-boards/generic/Makefile
new file mode 100644
index 0000000..0e7853f
--- /dev/null
+++ b/arch/mips/ite-boards/generic/Makefile
@@ -0,0 +1,15 @@
+#
+# Copyright 2000 MontaVista Software Inc.
+# Author: MontaVista Software, Inc.
+# ppopov@mvista.com or source@mvista.com
+#
+# Makefile for the ITE 8172 (qed-4n-s01b) board, generic files.
+#
+
+obj-y += it8172_setup.o irq.o int-handler.o pmon_prom.o \
+ time.o lpc.o puts.o reset.o
+
+obj-$(CONFIG_IT8172_CIR)+= it8172_cir.o
+obj-$(CONFIG_KGDB) += dbg_io.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c
new file mode 100644
index 0000000..c4f8530
--- /dev/null
+++ b/arch/mips/ite-boards/generic/dbg_io.c
@@ -0,0 +1,125 @@
+
+#include <linux/config.h>
+
+#ifdef CONFIG_KGDB
+
+/* --- CONFIG --- */
+
+/* we need uint32 uint8 */
+/* #include "types.h" */
+typedef unsigned char uint8;
+typedef unsigned int uint32;
+
+/* --- END OF CONFIG --- */
+
+#define UART16550_BAUD_2400 2400
+#define UART16550_BAUD_4800 4800
+#define UART16550_BAUD_9600 9600
+#define UART16550_BAUD_19200 19200
+#define UART16550_BAUD_38400 38400
+#define UART16550_BAUD_57600 57600
+#define UART16550_BAUD_115200 115200
+
+#define UART16550_PARITY_NONE 0
+#define UART16550_PARITY_ODD 0x08
+#define UART16550_PARITY_EVEN 0x18
+#define UART16550_PARITY_MARK 0x28
+#define UART16550_PARITY_SPACE 0x38
+
+#define UART16550_DATA_5BIT 0x0
+#define UART16550_DATA_6BIT 0x1
+#define UART16550_DATA_7BIT 0x2
+#define UART16550_DATA_8BIT 0x3
+
+#define UART16550_STOP_1BIT 0x0
+#define UART16550_STOP_2BIT 0x4
+
+/* ----------------------------------------------------- */
+
+/* === CONFIG === */
+
+/* [stevel] we use the IT8712 serial port for kgdb */
+#define DEBUG_BASE 0xB40003F8 /* 8712 serial port 1 base address */
+#define MAX_BAUD 115200
+
+/* === END OF CONFIG === */
+
+/* register offset */
+#define OFS_RCV_BUFFER 0
+#define OFS_TRANS_HOLD 0
+#define OFS_SEND_BUFFER 0
+#define OFS_INTR_ENABLE 1
+#define OFS_INTR_ID 2
+#define OFS_DATA_FORMAT 3
+#define OFS_LINE_CONTROL 3
+#define OFS_MODEM_CONTROL 4
+#define OFS_RS232_OUTPUT 4
+#define OFS_LINE_STATUS 5
+#define OFS_MODEM_STATUS 6
+#define OFS_RS232_INPUT 6
+#define OFS_SCRATCH_PAD 7
+
+#define OFS_DIVISOR_LSB 0
+#define OFS_DIVISOR_MSB 1
+
+
+/* memory-mapped read/write of the port */
+#define UART16550_READ(y) (*((volatile uint8*)(DEBUG_BASE + y)))
+#define UART16550_WRITE(y,z) ((*((volatile uint8*)(DEBUG_BASE + y))) = z)
+
+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+ /* disable interrupts */
+ UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+ /* set up buad rate */
+ {
+ uint32 divisor;
+
+ /* set DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+
+ /* set divisor */
+ divisor = MAX_BAUD / baud;
+ UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+ UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
+
+ /* clear DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+ }
+
+ /* set data format */
+ UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+static int remoteDebugInitialized = 0;
+
+uint8 getDebugChar(void)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(UART16550_BAUD_115200,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+ return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+int putDebugChar(uint8 byte)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(UART16550_BAUD_115200,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
+ UART16550_WRITE(OFS_SEND_BUFFER, byte);
+ return 1;
+}
+
+#endif
diff --git a/arch/mips/ite-boards/generic/int-handler.S b/arch/mips/ite-boards/generic/int-handler.S
new file mode 100644
index 0000000..d190d8a
--- /dev/null
+++ b/arch/mips/ite-boards/generic/int-handler.S
@@ -0,0 +1,63 @@
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+ .text
+ .set macro
+ .set noat
+ .align 5
+
+NESTED(it8172_IRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI # Important: mark KERNEL mode !
+
+ /* We're working with 'reorder' set at this point. */
+ /*
+ * Get pending interrupts
+ */
+
+ mfc0 t0,CP0_CAUSE # get pending interrupts
+ mfc0 t1,CP0_STATUS # get enabled interrupts
+ and t0,t1 # isolate allowed ones
+
+ andi t0,0xff00 # isolate pending bits
+ beqz t0, 3f # spurious interrupt
+
+ andi a0, t0, CAUSEF_IP7
+ beq a0, zero, 1f
+
+ li a0, 127 # MIPS_CPU_TIMER_IRQ = (NR_IRQS-1)
+ move a1, sp
+ jal ll_timer_interrupt
+ j ret_from_irq
+ nop
+
+1:
+ andi a0, t0, CAUSEF_IP2 # the only int we expect at this time
+ beq a0, zero, 3f
+ move a0,sp
+ jal it8172_hw0_irqdispatch
+
+ mfc0 t0,CP0_STATUS # disable interrupts
+ ori t0,1
+ xori t0,1
+ mtc0 t0,CP0_STATUS
+ nop
+ nop
+ nop
+
+ la a1, ret_from_irq
+ jr a1
+ nop
+
+3:
+ move a0, sp
+ jal mips_spurious_interrupt
+ nop
+ la a1, ret_from_irq
+ jr a1
+ nop
+
+END(it8172_IRQ)
+
diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c
new file mode 100644
index 0000000..cb71b90
--- /dev/null
+++ b/arch/mips/ite-boards/generic/irq.c
@@ -0,0 +1,304 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * ITE 8172G interrupt/setup routines.
+ *
+ * Copyright 2000,2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * Part of this file was derived from Carsten Langgaard's
+ * arch/mips/mips-boards/atlas/atlas_int.c.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/serial_reg.h>
+#include <linux/bitops.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/it8172/it8172.h>
+#include <asm/it8172/it8172_int.h>
+#include <asm/it8172/it8172_dbg.h>
+
+/* revisit */
+#define EXT_IRQ0_TO_IP 2 /* IP 2 */
+#define EXT_IRQ5_TO_IP 7 /* IP 7 */
+
+#define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
+
+void disable_it8172_irq(unsigned int irq_nr);
+void enable_it8172_irq(unsigned int irq_nr);
+
+extern void set_debug_traps(void);
+extern void mips_timer_interrupt(int irq, struct pt_regs *regs);
+extern asmlinkage void it8172_IRQ(void);
+
+struct it8172_intc_regs volatile *it8172_hw0_icregs =
+ (struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE));
+
+static void disable_it8172_irq(unsigned int irq_nr)
+{
+ if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) {
+ /* LPC interrupt */
+ it8172_hw0_icregs->lpc_mask |=
+ (1 << (irq_nr - IT8172_LPC_IRQ_BASE));
+ } else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) {
+ /* Local Bus interrupt */
+ it8172_hw0_icregs->lb_mask |=
+ (1 << (irq_nr - IT8172_LB_IRQ_BASE));
+ } else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) {
+ /* PCI and other interrupts */
+ it8172_hw0_icregs->pci_mask |=
+ (1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE));
+ } else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) {
+ /* NMI interrupts */
+ it8172_hw0_icregs->nmi_mask |=
+ (1 << (irq_nr - IT8172_NMI_IRQ_BASE));
+ } else {
+ panic("disable_it8172_irq: bad irq %d", irq_nr);
+ }
+}
+
+static void enable_it8172_irq(unsigned int irq_nr)
+{
+ if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) {
+ /* LPC interrupt */
+ it8172_hw0_icregs->lpc_mask &=
+ ~(1 << (irq_nr - IT8172_LPC_IRQ_BASE));
+ }
+ else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) {
+ /* Local Bus interrupt */
+ it8172_hw0_icregs->lb_mask &=
+ ~(1 << (irq_nr - IT8172_LB_IRQ_BASE));
+ }
+ else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) {
+ /* PCI and other interrupts */
+ it8172_hw0_icregs->pci_mask &=
+ ~(1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE));
+ }
+ else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) {
+ /* NMI interrupts */
+ it8172_hw0_icregs->nmi_mask &=
+ ~(1 << (irq_nr - IT8172_NMI_IRQ_BASE));
+ }
+ else {
+ panic("enable_it8172_irq: bad irq %d", irq_nr);
+ }
+}
+
+static unsigned int startup_ite_irq(unsigned int irq)
+{
+ enable_it8172_irq(irq);
+ return 0;
+}
+
+#define shutdown_ite_irq disable_it8172_irq
+#define mask_and_ack_ite_irq disable_it8172_irq
+
+static void end_ite_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_it8172_irq(irq);
+}
+
+static struct hw_interrupt_type it8172_irq_type = {
+ "ITE8172",
+ startup_ite_irq,
+ shutdown_ite_irq,
+ enable_it8172_irq,
+ disable_it8172_irq,
+ mask_and_ack_ite_irq,
+ end_ite_irq,
+ NULL
+};
+
+
+static void enable_none(unsigned int irq) { }
+static unsigned int startup_none(unsigned int irq) { return 0; }
+static void disable_none(unsigned int irq) { }
+static void ack_none(unsigned int irq) { }
+
+/* startup is the same as "enable", shutdown is same as "disable" */
+#define shutdown_none disable_none
+#define end_none enable_none
+
+static struct hw_interrupt_type cp0_irq_type = {
+ "CP0 Count",
+ startup_none,
+ shutdown_none,
+ enable_none,
+ disable_none,
+ ack_none,
+ end_none
+};
+
+void enable_cpu_timer(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ set_c0_status(0x100 << EXT_IRQ5_TO_IP);
+ local_irq_restore(flags);
+}
+
+void __init arch_init_irq(void)
+{
+ int i;
+ unsigned long flags;
+
+ memset(irq_desc, 0, sizeof(irq_desc));
+ set_except_vector(0, it8172_IRQ);
+
+ /* mask all interrupts */
+ it8172_hw0_icregs->lb_mask = 0xffff;
+ it8172_hw0_icregs->lpc_mask = 0xffff;
+ it8172_hw0_icregs->pci_mask = 0xffff;
+ it8172_hw0_icregs->nmi_mask = 0xffff;
+
+ /* make all interrupts level triggered */
+ it8172_hw0_icregs->lb_trigger = 0;
+ it8172_hw0_icregs->lpc_trigger = 0;
+ it8172_hw0_icregs->pci_trigger = 0;
+ it8172_hw0_icregs->nmi_trigger = 0;
+
+ /* active level setting */
+ /* uart, keyboard, and mouse are active high */
+ it8172_hw0_icregs->lpc_level = (0x10 | 0x2 | 0x1000);
+ it8172_hw0_icregs->lb_level |= 0x20;
+
+ /* keyboard and mouse are edge triggered */
+ it8172_hw0_icregs->lpc_trigger |= (0x2 | 0x1000);
+
+
+#if 0
+ // Enable this piece of code to make internal USB interrupt
+ // edge triggered.
+ it8172_hw0_icregs->pci_trigger |=
+ (1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE));
+ it8172_hw0_icregs->pci_level &=
+ ~(1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE));
+#endif
+
+ for (i = 0; i <= IT8172_LAST_IRQ; i++) {
+ irq_desc[i].handler = &it8172_irq_type;
+ spin_lock_init(&irq_desc[i].lock);
+ }
+ irq_desc[MIPS_CPU_TIMER_IRQ].handler = &cp0_irq_type;
+ set_c0_status(ALLINTS_NOTIMER);
+}
+
+void mips_spurious_interrupt(struct pt_regs *regs)
+{
+#if 1
+ return;
+#else
+ unsigned long status, cause;
+
+ printk("got spurious interrupt\n");
+ status = read_c0_status();
+ cause = read_c0_cause();
+ printk("status %x cause %x\n", status, cause);
+ printk("epc %x badvaddr %x \n", regs->cp0_epc, regs->cp0_badvaddr);
+#endif
+}
+
+void it8172_hw0_irqdispatch(struct pt_regs *regs)
+{
+ int irq;
+ unsigned short intstatus = 0, status = 0;
+
+ intstatus = it8172_hw0_icregs->intstatus;
+ if (intstatus & 0x8) {
+ panic("Got NMI interrupt");
+ } else if (intstatus & 0x4) {
+ /* PCI interrupt */
+ irq = 0;
+ status |= it8172_hw0_icregs->pci_req;
+ while (!(status & 0x1)) {
+ irq++;
+ status >>= 1;
+ }
+ irq += IT8172_PCI_DEV_IRQ_BASE;
+ } else if (intstatus & 0x1) {
+ /* Local Bus interrupt */
+ irq = 0;
+ status |= it8172_hw0_icregs->lb_req;
+ while (!(status & 0x1)) {
+ irq++;
+ status >>= 1;
+ }
+ irq += IT8172_LB_IRQ_BASE;
+ } else if (intstatus & 0x2) {
+ /* LPC interrupt */
+ /* Since some lpc interrupts are edge triggered,
+ * we could lose an interrupt this way because
+ * we acknowledge all ints at onces. Revisit.
+ */
+ status |= it8172_hw0_icregs->lpc_req;
+ it8172_hw0_icregs->lpc_req = 0; /* acknowledge ints */
+ irq = 0;
+ while (!(status & 0x1)) {
+ irq++;
+ status >>= 1;
+ }
+ irq += IT8172_LPC_IRQ_BASE;
+ } else
+ return;
+
+ do_IRQ(irq, regs);
+}
+
+void show_pending_irqs(void)
+{
+ fputs("intstatus: ");
+ put32(it8172_hw0_icregs->intstatus);
+ puts("");
+
+ fputs("pci_req: ");
+ put32(it8172_hw0_icregs->pci_req);
+ puts("");
+
+ fputs("lb_req: ");
+ put32(it8172_hw0_icregs->lb_req);
+ puts("");
+
+ fputs("lpc_req: ");
+ put32(it8172_hw0_icregs->lpc_req);
+ puts("");
+}
diff --git a/arch/mips/ite-boards/generic/it8172_cir.c b/arch/mips/ite-boards/generic/it8172_cir.c
new file mode 100644
index 0000000..19deb15
--- /dev/null
+++ b/arch/mips/ite-boards/generic/it8172_cir.c
@@ -0,0 +1,171 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * IT8172 Consumer IR port generic routines.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_IT8172_CIR
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/it8172/it8172.h>
+#include <asm/it8172/it8172_cir.h>
+
+
+volatile struct it8172_cir_regs *cir_regs[NUM_CIR_PORTS] = {
+ (volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR0_BASE)),
+ (volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR1_BASE))};
+
+
+/*
+ * Initialize Consumer IR Port.
+ */
+int cir_port_init(struct cir_port *cir)
+{
+ int port = cir->port;
+ unsigned char data;
+
+ /* set baud rate */
+ cir_regs[port]->bdlr = cir->baud_rate & 0xff;
+ cir_regs[port]->bdhr = (cir->baud_rate >> 8) & 0xff;
+
+ /* set receiver control register */
+ cir_regs[port]->rcr = (CIR_SET_RDWOS(cir->rdwos) | CIR_SET_RXDCR(cir->rxdcr));
+
+ /* set carrier frequency register */
+ cir_regs[port]->cfr = (CIR_SET_CF(cir->cfq) | CIR_SET_HS(cir->hcfs));
+
+ /* set fifo threshold */
+ data = cir_regs[port]->mstcr & 0xf3;
+ data |= CIR_SET_FIFO_TL(cir->fifo_tl);
+ cir_regs[port]->mstcr = data;
+
+ clear_fifo(cir);
+ enable_receiver(cir);
+ disable_rx_demodulation(cir);
+
+ set_rx_active(cir);
+ int_enable(cir);
+ rx_int_enable(cir);
+
+ return 0;
+}
+
+
+void clear_fifo(struct cir_port *cir)
+{
+ cir_regs[cir->port]->mstcr |= CIR_FIFO_CLEAR;
+}
+
+void enable_receiver(struct cir_port *cir)
+{
+ cir_regs[cir->port]->rcr |= CIR_RXEN;
+}
+
+void disable_receiver(struct cir_port *cir)
+{
+ cir_regs[cir->port]->rcr &= ~CIR_RXEN;
+}
+
+void enable_rx_demodulation(struct cir_port *cir)
+{
+ cir_regs[cir->port]->rcr |= CIR_RXEND;
+}
+
+void disable_rx_demodulation(struct cir_port *cir)
+{
+ cir_regs[cir->port]->rcr &= ~CIR_RXEND;
+}
+
+void set_rx_active(struct cir_port *cir)
+{
+ cir_regs[cir->port]->rcr |= CIR_RXACT;
+}
+
+void int_enable(struct cir_port *cir)
+{
+ cir_regs[cir->port]->ier |= CIR_IEC;
+}
+
+void rx_int_enable(struct cir_port *cir)
+{
+ cir_regs[cir->port]->ier |= CIR_RDAIE;
+}
+
+void dump_regs(struct cir_port *cir)
+{
+ printk("mstcr %x ier %x iir %x cfr %x rcr %x tcr %x tfsr %x rfsr %x\n",
+ cir_regs[cir->port]->mstcr,
+ cir_regs[cir->port]->ier,
+ cir_regs[cir->port]->iir,
+ cir_regs[cir->port]->cfr,
+ cir_regs[cir->port]->rcr,
+ cir_regs[cir->port]->tcr,
+ cir_regs[cir->port]->tfsr,
+ cir_regs[cir->port]->rfsr);
+
+ while (cir_regs[cir->port]->iir & CIR_RDAI) {
+ printk("data %x\n", cir_regs[cir->port]->dr);
+ }
+}
+
+void dump_reg_addr(struct cir_port *cir)
+{
+ printk("dr %x mstcr %x ier %x iir %x cfr %x rcr %x tcr %x bdlr %x bdhr %x tfsr %x rfsr %x\n",
+ (unsigned)&cir_regs[cir->port]->dr,
+ (unsigned)&cir_regs[cir->port]->mstcr,
+ (unsigned)&cir_regs[cir->port]->ier,
+ (unsigned)&cir_regs[cir->port]->iir,
+ (unsigned)&cir_regs[cir->port]->cfr,
+ (unsigned)&cir_regs[cir->port]->rcr,
+ (unsigned)&cir_regs[cir->port]->tcr,
+ (unsigned)&cir_regs[cir->port]->bdlr,
+ (unsigned)&cir_regs[cir->port]->bdhr,
+ (unsigned)&cir_regs[cir->port]->tfsr,
+ (unsigned)&cir_regs[cir->port]->rfsr);
+}
+
+int cir_get_rx_count(struct cir_port *cir)
+{
+ return cir_regs[cir->port]->rfsr & CIR_RXFBC_MASK;
+}
+
+char cir_read_data(struct cir_port *cir)
+{
+ return cir_regs[cir->port]->dr;
+}
+
+char get_int_status(struct cir_port *cir)
+{
+ return cir_regs[cir->port]->iir;
+}
+#endif
diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c
new file mode 100644
index 0000000..d808a67
--- /dev/null
+++ b/arch/mips/ite-boards/generic/it8172_setup.c
@@ -0,0 +1,309 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * IT8172/QED5231 board setup.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/serial_reg.h>
+#include <linux/major.h>
+#include <linux/kdev_t.h>
+#include <linux/root_dev.h>
+
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/traps.h>
+#include <asm/it8172/it8172.h>
+#include <asm/it8712.h>
+
+extern struct resource ioport_resource;
+#ifdef CONFIG_SERIO_I8042
+int init_8712_keyboard(void);
+#endif
+
+extern int SearchIT8712(void);
+extern void InitLPCInterface(void);
+extern char * __init prom_getcmdline(void);
+extern void it8172_restart(char *command);
+extern void it8172_halt(void);
+extern void it8172_power_off(void);
+
+extern void (*board_time_init)(void);
+extern void (*board_timer_setup)(struct irqaction *irq);
+extern void it8172_time_init(void);
+extern void it8172_timer_setup(struct irqaction *irq);
+
+#ifdef CONFIG_IT8172_REVC
+struct {
+ struct resource ram;
+ struct resource pci_mem;
+ struct resource pci_io;
+ struct resource flash;
+ struct resource boot;
+} it8172_resources = {
+ { "RAM", 0, 0, IORESOURCE_MEM }, /* to be initted */
+ { "PCI Mem", 0x10000000, 0x13FFFFFF, IORESOURCE_MEM },
+ { "PCI I/O", 0x14000000, 0x17FFFFFF },
+ { "Flash", 0x08000000, 0x0CFFFFFF },
+ { "Boot ROM", 0x1FC00000, 0x1FFFFFFF }
+};
+#else
+struct {
+ struct resource ram;
+ struct resource pci_mem0;
+ struct resource pci_mem1;
+ struct resource pci_io;
+ struct resource pci_mem2;
+ struct resource pci_mem3;
+ struct resource flash;
+ struct resource boot;
+} it8172_resources = {
+ { "RAM", 0, 0, IORESOURCE_MEM }, /* to be initted */
+ { "PCI Mem0", 0x0C000000, 0x0FFFFFFF, IORESOURCE_MEM },
+ { "PCI Mem1", 0x10000000, 0x13FFFFFF, IORESOURCE_MEM },
+ { "PCI I/O", 0x14000000, 0x17FFFFFF },
+ { "PCI Mem2", 0x1A000000, 0x1BFFFFFF, IORESOURCE_MEM },
+ { "PCI Mem3", 0x1C000000, 0x1FBFFFFF, IORESOURCE_MEM },
+ { "Flash", 0x08000000, 0x0CFFFFFF },
+ { "Boot ROM", 0x1FC00000, 0x1FFFFFFF }
+};
+#endif
+
+
+void __init it8172_init_ram_resource(unsigned long memsize)
+{
+ it8172_resources.ram.end = memsize;
+}
+
+static void __init it8172_setup(void)
+{
+ unsigned short dsr;
+ char *argptr;
+
+ argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_CONSOLE
+ if ((argptr = strstr(argptr, "console=")) == NULL) {
+ argptr = prom_getcmdline();
+ strcat(argptr, " console=ttyS0,115200");
+ }
+#endif
+
+ clear_c0_status(ST0_FR);
+
+ board_time_init = it8172_time_init;
+ board_timer_setup = it8172_timer_setup;
+
+ _machine_restart = it8172_restart;
+ _machine_halt = it8172_halt;
+ _machine_power_off = it8172_power_off;
+
+ /*
+ * IO/MEM resources.
+ *
+ * revisit this area.
+ */
+ set_io_port_base(KSEG1);
+ ioport_resource.start = it8172_resources.pci_io.start;
+ ioport_resource.end = it8172_resources.pci_io.end;
+#ifdef CONFIG_IT8172_REVC
+ iomem_resource.start = it8172_resources.pci_mem.start;
+ iomem_resource.end = it8172_resources.pci_mem.end;
+#else
+ iomem_resource.start = it8172_resources.pci_mem0.start;
+ iomem_resource.end = it8172_resources.pci_mem3.end;
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ ROOT_DEV = Root_RAM0;
+#endif
+
+ /*
+ * Pull enabled devices out of standby
+ */
+ IT_IO_READ16(IT_PM_DSR, dsr);
+
+ /*
+ * Fixme: This breaks when these drivers are modules!!!
+ */
+#ifdef CONFIG_SOUND_IT8172
+ dsr &= ~IT_PM_DSR_ACSB;
+#else
+ dsr |= IT_PM_DSR_ACSB;
+#endif
+#ifdef CONFIG_BLK_DEV_IT8172
+ dsr &= ~IT_PM_DSR_IDESB;
+#else
+ dsr |= IT_PM_DSR_IDESB;
+#endif
+ IT_IO_WRITE16(IT_PM_DSR, dsr);
+
+ InitLPCInterface();
+
+#ifdef CONFIG_MIPS_ITE8172
+ if (SearchIT8712()) {
+ printk("Found IT8712 Super IO\n");
+ /* enable IT8712 serial port */
+ LPCSetConfig(LDN_SERIAL1, 0x30, 0x01); /* enable */
+ LPCSetConfig(LDN_SERIAL1, 0x23, 0x01); /* clock selection */
+#ifdef CONFIG_SERIO_I8042
+ if (init_8712_keyboard()) {
+ printk("Unable to initialize keyboard\n");
+ LPCSetConfig(LDN_KEYBOARD, 0x30, 0x0); /* disable keyboard */
+ } else {
+ LPCSetConfig(LDN_KEYBOARD, 0x30, 0x1); /* enable keyboard */
+ LPCSetConfig(LDN_KEYBOARD, 0xf0, 0x2);
+ LPCSetConfig(LDN_KEYBOARD, 0x71, 0x3);
+
+ LPCSetConfig(LDN_MOUSE, 0x30, 0x1); /* enable mouse */
+
+ LPCSetConfig(0x4, 0x30, 0x1);
+ LPCSetConfig(0x4, 0xf4, LPCGetConfig(0x4, 0xf4) | 0x80);
+
+ if ((LPCGetConfig(LDN_KEYBOARD, 0x30) == 0) ||
+ (LPCGetConfig(LDN_MOUSE, 0x30) == 0))
+ printk("Error: keyboard or mouse not enabled\n");
+
+ }
+#endif
+ }
+ else {
+ printk("IT8712 Super IO not found\n");
+ }
+#endif
+
+#ifdef CONFIG_IT8172_CIR
+ {
+ unsigned long data;
+ //printk("Enabling CIR0\n");
+ IT_IO_READ16(IT_PM_DSR, data);
+ data &= ~IT_PM_DSR_CIR0SB;
+ IT_IO_WRITE16(IT_PM_DSR, data);
+ //printk("DSR register: %x\n", (unsigned)IT_IO_READ16(IT_PM_DSR, data));
+ }
+#endif
+#ifdef CONFIG_IT8172_SCR0
+ {
+ unsigned i;
+ /* Enable Smart Card Reader 0 */
+ /* First power it up */
+ IT_IO_READ16(IT_PM_DSR, i);
+ i &= ~IT_PM_DSR_SCR0SB;
+ IT_IO_WRITE16(IT_PM_DSR, i);
+ /* Then initialize its registers */
+ outb(( IT_SCR_SFR_GATE_UART_OFF << IT_SCR_SFR_GATE_UART_BIT
+ |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT
+ |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT
+ |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT
+ |IT_SCR_SFR_ENABLE_ON << IT_SCR_SFR_ENABLE_BIT),
+ IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SFR);
+ outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT,
+ IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SCDR);
+ }
+#endif /* CONFIG_IT8172_SCR0 */
+#ifdef CONFIG_IT8172_SCR1
+ {
+ unsigned i;
+ /* Enable Smart Card Reader 1 */
+ /* First power it up */
+ IT_IO_READ16(IT_PM_DSR, i);
+ i &= ~IT_PM_DSR_SCR1SB;
+ IT_IO_WRITE16(IT_PM_DSR, i);
+ /* Then initialize its registers */
+ outb(( IT_SCR_SFR_GATE_UART_OFF << IT_SCR_SFR_GATE_UART_BIT
+ |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT
+ |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT
+ |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT
+ |IT_SCR_SFR_ENABLE_ON << IT_SCR_SFR_ENABLE_BIT),
+ IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SFR);
+ outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT,
+ IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SCDR);
+ }
+#endif /* CONFIG_IT8172_SCR1 */
+}
+
+early_initcall(it8172_setup);
+
+#ifdef CONFIG_SERIO_I8042
+/*
+ * According to the ITE Special BIOS Note for waking up the
+ * keyboard controller...
+ */
+static int init_8712_keyboard(void)
+{
+ unsigned int cmd_port = 0x14000064;
+ unsigned int data_port = 0x14000060;
+ ^^^^^^^^^^^
+ Somebody here doesn't grok the concept of io ports.
+
+ unsigned char data;
+ int i;
+
+ outb(0xaa, cmd_port); /* send self-test cmd */
+ i = 0;
+ while (!(inb(cmd_port) & 0x1)) { /* wait output buffer full */
+ i++;
+ if (i > 0xffffff)
+ return 1;
+ }
+
+ data = inb(data_port);
+ outb(0xcb, cmd_port); /* set ps2 mode */
+ while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
+ i++;
+ if (i > 0xffffff)
+ return 1;
+ }
+ outb(0x01, data_port);
+ while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
+ i++;
+ if (i > 0xffffff)
+ return 1;
+ }
+
+ outb(0x60, cmd_port); /* write 8042 command byte */
+ while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
+ i++;
+ if (i > 0xffffff)
+ return 1;
+ }
+ outb(0x45, data_port); /* at interface, keyboard enabled, system flag */
+ while (inb(cmd_port) & 0x2) { /* wait while input buffer full */
+ i++;
+ if (i > 0xffffff)
+ return 1;
+ }
+
+ outb(0xae, cmd_port); /* enable interface */
+ return 0;
+}
+#endif
diff --git a/arch/mips/ite-boards/generic/lpc.c b/arch/mips/ite-boards/generic/lpc.c
new file mode 100644
index 0000000..cc7584f
--- /dev/null
+++ b/arch/mips/ite-boards/generic/lpc.c
@@ -0,0 +1,144 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * ITE Semi IT8712 Super I/O functions.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/io.h>
+#include <asm/types.h>
+#include <asm/it8712.h>
+#include <asm/it8172/it8172.h>
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+void LPCEnterMBPnP(void)
+{
+ int i;
+ unsigned char key[4] = {0x87, 0x01, 0x55, 0x55};
+
+ for (i = 0; i<4; i++)
+ outb(key[i], LPC_KEY_ADDR);
+
+}
+
+void LPCExitMBPnP(void)
+{
+ outb(0x02, LPC_KEY_ADDR);
+ outb(0x02, LPC_DATA_ADDR);
+}
+
+void LPCSetConfig(char LdnNumber, char Index, char data)
+{
+ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
+ outb(0x07, LPC_KEY_ADDR);
+ outb(LdnNumber, LPC_DATA_ADDR);
+ outb(Index, LPC_KEY_ADDR);
+ outb(data, LPC_DATA_ADDR);
+ LPCExitMBPnP();
+}
+
+char LPCGetConfig(char LdnNumber, char Index)
+{
+ char rtn;
+
+ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
+ outb(0x07, LPC_KEY_ADDR);
+ outb(LdnNumber, LPC_DATA_ADDR);
+ outb(Index, LPC_KEY_ADDR);
+ rtn = inb(LPC_DATA_ADDR);
+ LPCExitMBPnP();
+ return rtn;
+}
+
+int SearchIT8712(void)
+{
+ unsigned char Id1, Id2;
+ unsigned short Id;
+
+ LPCEnterMBPnP();
+ outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */
+ Id1 = inb(LPC_DATA_ADDR);
+ outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */
+ Id2 = inb(LPC_DATA_ADDR);
+ Id = (Id1 << 8) | Id2;
+ LPCExitMBPnP();
+ if (Id == 0x8712)
+ return TRUE;
+ else
+ return FALSE;
+}
+
+void InitLPCInterface(void)
+{
+ unsigned char bus, dev_fn;
+ unsigned long data;
+
+ bus = 0;
+ dev_fn = 1<<3 | 4;
+
+
+ /* pci cmd, SERR# Enable */
+ IT_WRITE(IT_CONFADDR,
+ (bus << IT_BUSNUM_SHF) |
+ (dev_fn << IT_FUNCNUM_SHF) |
+ ((0x4 / 4) << IT_REGNUM_SHF));
+ IT_READ(IT_CONFDATA, data);
+ data |= 0x0100;
+ IT_WRITE(IT_CONFADDR,
+ (bus << IT_BUSNUM_SHF) |
+ (dev_fn << IT_FUNCNUM_SHF) |
+ ((0x4 / 4) << IT_REGNUM_SHF));
+ IT_WRITE(IT_CONFDATA, data);
+
+ /* setup serial irq control register */
+ IT_WRITE(IT_CONFADDR,
+ (bus << IT_BUSNUM_SHF) |
+ (dev_fn << IT_FUNCNUM_SHF) |
+ ((0x48 / 4) << IT_REGNUM_SHF));
+ IT_READ(IT_CONFDATA, data);
+ data = (data & 0xffff00ff) | 0xc400;
+ IT_WRITE(IT_CONFADDR,
+ (bus << IT_BUSNUM_SHF) |
+ (dev_fn << IT_FUNCNUM_SHF) |
+ ((0x48 / 4) << IT_REGNUM_SHF));
+ IT_WRITE(IT_CONFDATA, data);
+
+
+ /* Enable I/O Space Subtractive Decode */
+ /* default 0x4C is 0x3f220000 */
+ IT_WRITE(IT_CONFADDR,
+ (bus << IT_BUSNUM_SHF) |
+ (dev_fn << IT_FUNCNUM_SHF) |
+ ((0x4C / 4) << IT_REGNUM_SHF));
+ IT_WRITE(IT_CONFDATA, 0x3f2200f3);
+}
diff --git a/arch/mips/ite-boards/generic/pmon_prom.c b/arch/mips/ite-boards/generic/pmon_prom.c
new file mode 100644
index 0000000..6e505af
--- /dev/null
+++ b/arch/mips/ite-boards/generic/pmon_prom.c
@@ -0,0 +1,136 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PROM library initialisation code, assuming a version of
+ * pmon is the boot code.
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * This file was derived from Carsten Langgaard's
+ * arch/mips/mips-boards/xx files.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+
+extern int prom_argc;
+extern char **prom_argv, **prom_envp;
+
+typedef struct
+{
+ char *name;
+/* char *val; */
+}t_env_var;
+
+
+char * __init prom_getcmdline(void)
+{
+ return &(arcs_cmdline[0]);
+}
+
+void __init prom_init_cmdline(void)
+{
+ char *cp;
+ int actr;
+
+ actr = 1; /* Always ignore argv[0] */
+
+ cp = &(arcs_cmdline[0]);
+ while(actr < prom_argc) {
+ strcpy(cp, prom_argv[actr]);
+ cp += strlen(prom_argv[actr]);
+ *cp++ = ' ';
+ actr++;
+ }
+ if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
+ --cp;
+ *cp = '\0';
+
+}
+
+
+char *prom_getenv(char *envname)
+{
+ /*
+ * Return a pointer to the given environment variable.
+ * Environment variables are stored in the form of "memsize=64".
+ */
+
+ t_env_var *env = (t_env_var *)prom_envp;
+ int i;
+
+ i = strlen(envname);
+
+ while(env->name) {
+ if(strncmp(envname, env->name, i) == 0) {
+ return(env->name + strlen(envname) + 1);
+ }
+ env++;
+ }
+ return(NULL);
+}
+
+static inline unsigned char str2hexnum(unsigned char c)
+{
+ if(c >= '0' && c <= '9')
+ return c - '0';
+ if(c >= 'a' && c <= 'f')
+ return c - 'a' + 10;
+ return 0; /* foo */
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ return 0;
+}
+
+unsigned long __init prom_get_memsize(void)
+{
+ char *memsize_str;
+ unsigned int memsize;
+
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str) {
+#ifdef CONFIG_MIPS_ITE8172
+ memsize = 32;
+#elif defined(CONFIG_MIPS_IVR)
+ memsize = 64;
+#else
+ memsize = 8;
+#endif
+ printk("memsize unknown: setting to %dMB\n", memsize);
+ } else {
+ printk("memsize: %s\n", memsize_str);
+ memsize = simple_strtol(memsize_str, NULL, 0);
+ }
+ return memsize;
+}
diff --git a/arch/mips/ite-boards/generic/puts.c b/arch/mips/ite-boards/generic/puts.c
new file mode 100644
index 0000000..20b02df
--- /dev/null
+++ b/arch/mips/ite-boards/generic/puts.c
@@ -0,0 +1,139 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Low level uart routines to directly access a 16550 uart.
+ *
+ * Copyright 2000,2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+
+#define SERIAL_BASE 0xB4011800 /* it8172 */
+#define SER_CMD 5
+#define SER_DATA 0x00
+#define TX_BUSY 0x20
+
+#define TIMEOUT 0xffff
+#undef SLOW_DOWN
+
+static const char digits[16] = "0123456789abcdef";
+static volatile unsigned char *const com1 = (unsigned char *) SERIAL_BASE;
+
+
+#ifdef SLOW_DOWN
+static inline void slow_down()
+{
+ int k;
+ for (k = 0; k < 10000; k++);
+}
+#else
+#define slow_down()
+#endif
+
+void putch(const unsigned char c)
+{
+ unsigned char ch;
+ int i = 0;
+
+ do {
+ ch = com1[SER_CMD];
+ slow_down();
+ i++;
+ if (i > TIMEOUT) {
+ break;
+ }
+ } while (0 == (ch & TX_BUSY));
+ com1[SER_DATA] = c;
+}
+
+void puts(unsigned char *cp)
+{
+ unsigned char ch;
+ int i = 0;
+
+ while (*cp) {
+ do {
+ ch = com1[SER_CMD];
+ slow_down();
+ i++;
+ if (i > TIMEOUT) {
+ break;
+ }
+ } while (0 == (ch & TX_BUSY));
+ com1[SER_DATA] = *cp++;
+ }
+ putch('\r');
+ putch('\n');
+}
+
+void fputs(unsigned char *cp)
+{
+ unsigned char ch;
+ int i = 0;
+
+ while (*cp) {
+
+ do {
+ ch = com1[SER_CMD];
+ slow_down();
+ i++;
+ if (i > TIMEOUT) {
+ break;
+ }
+ } while (0 == (ch & TX_BUSY));
+ com1[SER_DATA] = *cp++;
+ }
+}
+
+
+void put64(uint64_t ul)
+{
+ int cnt;
+ unsigned ch;
+
+ cnt = 16; /* 16 nibbles in a 64 bit long */
+ putch('0');
+ putch('x');
+ do {
+ cnt--;
+ ch = (unsigned char) (ul >> cnt * 4) & 0x0F;
+ putch(digits[ch]);
+ } while (cnt > 0);
+}
+
+void put32(unsigned u)
+{
+ int cnt;
+ unsigned ch;
+
+ cnt = 8; /* 8 nibbles in a 32 bit long */
+ putch('0');
+ putch('x');
+ do {
+ cnt--;
+ ch = (unsigned char) (u >> cnt * 4) & 0x0F;
+ putch(digits[ch]);
+ } while (cnt > 0);
+}
diff --git a/arch/mips/ite-boards/generic/reset.c b/arch/mips/ite-boards/generic/reset.c
new file mode 100644
index 0000000..03bd5ba
--- /dev/null
+++ b/arch/mips/ite-boards/generic/reset.c
@@ -0,0 +1,60 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * ITE 8172 reset routines.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * ppopov@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+
+void it8172_restart()
+{
+ set_c0_status(ST0_BEV | ST0_ERL);
+ change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+ flush_cache_all();
+ write_c0_wired(0);
+ __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
+}
+
+void it8172_halt(void)
+{
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+ while (1)
+ __asm__(".set\tmips3\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+}
+
+void it8172_power_off(void)
+{
+ it8172_halt();
+}
diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c
new file mode 100644
index 0000000..30a6c0d
--- /dev/null
+++ b/arch/mips/ite-boards/generic/time.c
@@ -0,0 +1,247 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * Copyright (C) 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/spinlock.h>
+
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/ptrace.h>
+#include <asm/it8172/it8172.h>
+#include <asm/it8172/it8172_int.h>
+#include <asm/debug.h>
+
+#define IT8172_RTC_ADR_REG (IT8172_PCI_IO_BASE + IT_RTC_BASE)
+#define IT8172_RTC_DAT_REG (IT8172_RTC_ADR_REG + 1)
+#define IT8172_RTC_CENTURY_REG (IT8172_PCI_IO_BASE + IT_RTC_CENTURY)
+
+static volatile char *rtc_adr_reg = (char*)KSEG1ADDR(IT8172_RTC_ADR_REG);
+static volatile char *rtc_dat_reg = (char*)KSEG1ADDR(IT8172_RTC_DAT_REG);
+static volatile char *rtc_century_reg = (char*)KSEG1ADDR(IT8172_RTC_CENTURY_REG);
+
+unsigned char it8172_rtc_read_data(unsigned long addr)
+{
+ unsigned char retval;
+
+ *rtc_adr_reg = addr;
+ retval = *rtc_dat_reg;
+ return retval;
+}
+
+void it8172_rtc_write_data(unsigned char data, unsigned long addr)
+{
+ *rtc_adr_reg = addr;
+ *rtc_dat_reg = data;
+}
+
+#undef CMOS_READ
+#undef CMOS_WRITE
+#define CMOS_READ(addr) it8172_rtc_read_data(addr)
+#define CMOS_WRITE(data, addr) it8172_rtc_write_data(data, addr)
+
+static unsigned char saved_control; /* remember rtc control reg */
+static inline int rtc_24h(void) { return saved_control & RTC_24H; }
+static inline int rtc_dm_binary(void) { return saved_control & RTC_DM_BINARY; }
+
+static inline unsigned char
+bin_to_hw(unsigned char c)
+{
+ if (rtc_dm_binary())
+ return c;
+ else
+ return ((c/10) << 4) + (c%10);
+}
+
+static inline unsigned char
+hw_to_bin(unsigned char c)
+{
+ if (rtc_dm_binary())
+ return c;
+ else
+ return (c>>4)*10 + (c &0xf);
+}
+
+/* 0x80 bit indicates pm in 12-hour format */
+static inline unsigned char
+hour_bin_to_hw(unsigned char c)
+{
+ if (rtc_24h())
+ return bin_to_hw(c);
+ if (c >= 12)
+ return 0x80 | bin_to_hw((c==12)?12:c-12); /* 12 is 12pm */
+ else
+ return bin_to_hw((c==0)?12:c); /* 0 is 12 AM, not 0 am */
+}
+
+static inline unsigned char
+hour_hw_to_bin(unsigned char c)
+{
+ unsigned char tmp = hw_to_bin(c&0x3f);
+ if (rtc_24h())
+ return tmp;
+ if (c & 0x80)
+ return (tmp==12)?12:tmp+12; /* 12pm is 12, not 24 */
+ else
+ return (tmp==12)?0:tmp; /* 12am is 0 */
+}
+
+static unsigned long r4k_offset; /* Amount to increment compare reg each time */
+static unsigned long r4k_cur; /* What counter should be at next timer irq */
+extern unsigned int mips_hpt_frequency;
+
+/*
+ * Figure out the r4k offset, the amount to increment the compare
+ * register for each time tick.
+ * Use the RTC to calculate offset.
+ */
+static unsigned long __init cal_r4koff(void)
+{
+ unsigned int flags;
+
+ local_irq_save(flags);
+
+ /* Start counter exactly on falling edge of update flag */
+ while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+ while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+ /* Start r4k counter. */
+ write_c0_count(0);
+
+ /* Read counter exactly on falling edge of update flag */
+ while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+ while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+ mips_hpt_frequency = read_c0_count();
+
+ /* restore interrupts */
+ local_irq_restore(flags);
+
+ return (mips_hpt_frequency / HZ);
+}
+
+static unsigned long
+it8172_rtc_get_time(void)
+{
+ unsigned int year, mon, day, hour, min, sec;
+ unsigned int flags;
+
+ /* avoid update-in-progress. */
+ for (;;) {
+ local_irq_save(flags);
+ if (! (CMOS_READ(RTC_REG_A) & RTC_UIP))
+ break;
+ /* don't hold intr closed all the time */
+ local_irq_restore(flags);
+ }
+
+ /* Read regs. */
+ sec = hw_to_bin(CMOS_READ(RTC_SECONDS));
+ min = hw_to_bin(CMOS_READ(RTC_MINUTES));
+ hour = hour_hw_to_bin(CMOS_READ(RTC_HOURS));
+ day = hw_to_bin(CMOS_READ(RTC_DAY_OF_MONTH));
+ mon = hw_to_bin(CMOS_READ(RTC_MONTH));
+ year = hw_to_bin(CMOS_READ(RTC_YEAR)) +
+ hw_to_bin(*rtc_century_reg) * 100;
+
+ /* restore interrupts */
+ local_irq_restore(flags);
+
+ return mktime(year, mon, day, hour, min, sec);
+}
+
+static int
+it8172_rtc_set_time(unsigned long t)
+{
+ struct rtc_time tm;
+ unsigned int flags;
+
+ /* convert */
+ to_tm(t, &tm);
+
+ /* avoid update-in-progress. */
+ for (;;) {
+ local_irq_save(flags);
+ if (! (CMOS_READ(RTC_REG_A) & RTC_UIP))
+ break;
+ /* don't hold intr closed all the time */
+ local_irq_restore(flags);
+ }
+
+ *rtc_century_reg = bin_to_hw(tm.tm_year/100);
+ CMOS_WRITE(bin_to_hw(tm.tm_sec), RTC_SECONDS);
+ CMOS_WRITE(bin_to_hw(tm.tm_min), RTC_MINUTES);
+ CMOS_WRITE(hour_bin_to_hw(tm.tm_hour), RTC_HOURS);
+ CMOS_WRITE(bin_to_hw(tm.tm_mday), RTC_DAY_OF_MONTH);
+ CMOS_WRITE(bin_to_hw(tm.tm_mon+1), RTC_MONTH); /* tm_mon starts from 0 */
+ CMOS_WRITE(bin_to_hw(tm.tm_year%100), RTC_YEAR);
+
+ /* restore interrupts */
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+void __init it8172_time_init(void)
+{
+ unsigned int est_freq, flags;
+
+ local_irq_save(flags);
+
+ saved_control = CMOS_READ(RTC_CONTROL);
+
+ printk("calculating r4koff... ");
+ r4k_offset = cal_r4koff();
+ printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+
+ est_freq = 2*r4k_offset*HZ;
+ est_freq += 5000; /* round */
+ est_freq -= est_freq%10000;
+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+ (est_freq%1000000)*100/1000000);
+
+ local_irq_restore(flags);
+
+ rtc_get_time = it8172_rtc_get_time;
+ rtc_set_time = it8172_rtc_set_time;
+}
+
+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
+void __init it8172_timer_setup(struct irqaction *irq)
+{
+ puts("timer_setup\n");
+ put32(NR_IRQS);
+ puts("");
+ /* we are using the cpu counter for timer interrupts */
+ setup_irq(MIPS_CPU_TIMER_IRQ, irq);
+
+ /* to generate the first timer interrupt */
+ r4k_cur = (read_c0_count() + r4k_offset);
+ write_c0_compare(r4k_cur);
+ set_c0_status(ALLINTS);
+}