[ACPI] Allow return to active cooling mode once passive mode is entered
http://bugzilla.kernel.org/show_bug.cgi?id=3410
https://bugzilla.novell.com/show_bug.cgi?id=131543
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Konstantin Karasyov <konstantin.a.karasyov@intel.com>
Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Yu Luming <luming.yu@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index a24847c0..19f3ea4 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -72,7 +72,7 @@
#define _COMPONENT ACPI_THERMAL_COMPONENT
ACPI_MODULE_NAME("acpi_thermal")
- MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_AUTHOR("Paul Diefenbaugh");
MODULE_DESCRIPTION(ACPI_THERMAL_DRIVER_NAME);
MODULE_LICENSE("GPL");
@@ -517,9 +517,9 @@
return_VALUE(0);
}
-static int acpi_thermal_passive(struct acpi_thermal *tz)
+static void acpi_thermal_passive(struct acpi_thermal *tz)
{
- int result = 0;
+ int result = 1;
struct acpi_thermal_passive *passive = NULL;
int trend = 0;
int i = 0;
@@ -527,7 +527,7 @@
ACPI_FUNCTION_TRACE("acpi_thermal_passive");
if (!tz || !tz->trips.passive.flags.valid)
- return_VALUE(-EINVAL);
+ return;
passive = &(tz->trips.passive);
@@ -547,7 +547,7 @@
trend, passive->tc1, tz->temperature,
tz->last_temperature, passive->tc2,
tz->temperature, passive->temperature));
- tz->trips.passive.flags.enabled = 1;
+ passive->flags.enabled = 1;
/* Heating up? */
if (trend > 0)
for (i = 0; i < passive->devices.count; i++)
@@ -556,12 +556,32 @@
handles[i],
ACPI_PROCESSOR_LIMIT_INCREMENT);
/* Cooling off? */
- else if (trend < 0)
+ else if (trend < 0) {
for (i = 0; i < passive->devices.count; i++)
- acpi_processor_set_thermal_limit(passive->
- devices.
- handles[i],
- ACPI_PROCESSOR_LIMIT_DECREMENT);
+ /*
+ * assume that we are on highest
+ * freq/lowest thrott and can leave
+ * passive mode, even in error case
+ */
+ if (!acpi_processor_set_thermal_limit
+ (passive->devices.handles[i],
+ ACPI_PROCESSOR_LIMIT_DECREMENT))
+ result = 0;
+ /*
+ * Leave cooling mode, even if the temp might
+ * higher than trip point This is because some
+ * machines might have long thermal polling
+ * frequencies (tsp) defined. We will fall back
+ * into passive mode in next cycle (probably quicker)
+ */
+ if (result) {
+ passive->flags.enabled = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Disabling passive cooling, still above threshold,"
+ " but we are cooling down\n"));
+ }
+ }
+ return;
}
/*
@@ -571,23 +591,21 @@
* and avoid thrashing around the passive trip point. Note that we
* assume symmetry.
*/
- else if (tz->trips.passive.flags.enabled) {
- for (i = 0; i < passive->devices.count; i++)
- result =
- acpi_processor_set_thermal_limit(passive->devices.
- handles[i],
- ACPI_PROCESSOR_LIMIT_DECREMENT);
- if (result == 1) {
- tz->trips.passive.flags.enabled = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Disabling passive cooling (zone is cool)\n"));
- }
+ if (!passive->flags.enabled)
+ return;
+ for (i = 0; i < passive->devices.count; i++)
+ if (!acpi_processor_set_thermal_limit
+ (passive->devices.handles[i],
+ ACPI_PROCESSOR_LIMIT_DECREMENT))
+ result = 0;
+ if (result) {
+ passive->flags.enabled = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Disabling passive cooling (zone is cool)\n"));
}
-
- return_VALUE(0);
}
-static int acpi_thermal_active(struct acpi_thermal *tz)
+static void acpi_thermal_active(struct acpi_thermal *tz)
{
int result = 0;
struct acpi_thermal_active *active = NULL;
@@ -598,74 +616,66 @@
ACPI_FUNCTION_TRACE("acpi_thermal_active");
if (!tz)
- return_VALUE(-EINVAL);
+ return;
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
-
active = &(tz->trips.active[i]);
if (!active || !active->flags.valid)
break;
-
- /*
- * Above Threshold?
- * ----------------
- * If not already enabled, turn ON all cooling devices
- * associated with this active threshold.
- */
if (tz->temperature >= active->temperature) {
+ /*
+ * Above Threshold?
+ * ----------------
+ * If not already enabled, turn ON all cooling devices
+ * associated with this active threshold.
+ */
if (active->temperature > maxtemp)
- tz->state.active_index = i, maxtemp =
- active->temperature;
- if (!active->flags.enabled) {
- for (j = 0; j < active->devices.count; j++) {
- result =
- acpi_bus_set_power(active->devices.
- handles[j],
- ACPI_STATE_D0);
- if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to turn cooling device [%p] 'on'\n",
- active->
- devices.
- handles[j]));
- continue;
- }
- active->flags.enabled = 1;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Cooling device [%p] now 'on'\n",
+ tz->state.active_index = i;
+ maxtemp = active->temperature;
+ if (active->flags.enabled)
+ continue;
+ for (j = 0; j < active->devices.count; j++) {
+ result =
+ acpi_bus_set_power(active->devices.
+ handles[j],
+ ACPI_STATE_D0);
+ if (result) {
+ ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ "Unable to turn cooling device [%p] 'on'\n",
active->devices.
handles[j]));
+ continue;
}
+ active->flags.enabled = 1;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Cooling device [%p] now 'on'\n",
+ active->devices.handles[j]));
}
+ continue;
}
+ if (!active->flags.enabled)
+ continue;
/*
* Below Threshold?
* ----------------
* Turn OFF all cooling devices associated with this
* threshold.
*/
- else if (active->flags.enabled) {
- for (j = 0; j < active->devices.count; j++) {
- result =
- acpi_bus_set_power(active->devices.
- handles[j],
- ACPI_STATE_D3);
- if (result) {
- ACPI_DEBUG_PRINT((ACPI_DB_WARN,
- "Unable to turn cooling device [%p] 'off'\n",
- active->devices.
- handles[j]));
- continue;
- }
- active->flags.enabled = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Cooling device [%p] now 'off'\n",
+ for (j = 0; j < active->devices.count; j++) {
+ result = acpi_bus_set_power(active->devices.handles[j],
+ ACPI_STATE_D3);
+ if (result) {
+ ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+ "Unable to turn cooling device [%p] 'off'\n",
active->devices.handles[j]));
+ continue;
}
+ active->flags.enabled = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Cooling device [%p] now 'off'\n",
+ active->devices.handles[j]));
}
}
-
- return_VALUE(0);
}
static void acpi_thermal_check(void *context);
@@ -744,15 +754,12 @@
* Again, separated from the above two to allow independent policy
* decisions.
*/
- if (tz->trips.critical.flags.enabled)
- tz->state.critical = 1;
- if (tz->trips.hot.flags.enabled)
- tz->state.hot = 1;
- if (tz->trips.passive.flags.enabled)
- tz->state.passive = 1;
+ tz->state.critical = tz->trips.critical.flags.enabled;
+ tz->state.hot = tz->trips.hot.flags.enabled;
+ tz->state.passive = tz->trips.passive.flags.enabled;
+ tz->state.active = 0;
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
- if (tz->trips.active[i].flags.enabled)
- tz->state.active = 1;
+ tz->state.active |= tz->trips.active[i].flags.enabled;
/*
* Calculate Sleep Time