irqchip/gic-v3-its: Move pending table allocation to init time
Pending tables for the redistributors are currently allocated
one at a time as each CPU boots. This is causing some grief
for Linux/RT (allocation from within a CPU hotplug notifier is
frown upon).
Let's move this allocation to take place at init time, when we
only have a single CPU. It means we're allocating memory for CPUs
that are not online yet, but most system will boot all of their
CPUs anyway, so that's not completely wasted.
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Bhupesh Sharma <bhsharma@redhat.com>
Tested-by: Lei Zhang <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index cb59a4d..0219668 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -173,6 +173,7 @@ static DEFINE_RAW_SPINLOCK(vmovp_lock);
static DEFINE_IDA(its_vpeid_ida);
#define gic_data_rdist() (raw_cpu_ptr(gic_rdists->rdist))
+#define gic_data_rdist_cpu(cpu) (per_cpu_ptr(gic_rdists->rdist, cpu))
#define gic_data_rdist_rd_base() (gic_data_rdist()->rd_base)
#define gic_data_rdist_vlpi_base() (gic_data_rdist_rd_base() + SZ_128K)
@@ -1625,7 +1626,7 @@ static void its_free_prop_table(struct page *prop_page)
get_order(LPI_PROPBASE_SZ));
}
-static int __init its_alloc_lpi_tables(void)
+static int __init its_setup_lpi_prop_table(void)
{
phys_addr_t paddr;
@@ -1944,29 +1945,46 @@ static void its_free_pending_table(struct page *pt)
free_pages((unsigned long)page_address(pt), get_order(LPI_PENDBASE_SZ));
}
+static int __init allocate_lpi_tables(void)
+{
+ int err, cpu;
+
+ err = its_setup_lpi_prop_table();
+ if (err)
+ return err;
+
+ /*
+ * We allocate all the pending tables anyway, as we may have a
+ * mix of RDs that have had LPIs enabled, and some that
+ * don't. We'll free the unused ones as each CPU comes online.
+ */
+ for_each_possible_cpu(cpu) {
+ struct page *pend_page;
+
+ pend_page = its_allocate_pending_table(GFP_NOWAIT);
+ if (!pend_page) {
+ pr_err("Failed to allocate PENDBASE for CPU%d\n", cpu);
+ return -ENOMEM;
+ }
+
+ gic_data_rdist_cpu(cpu)->pend_page = pend_page;
+ }
+
+ return 0;
+}
+
static void its_cpu_init_lpis(void)
{
void __iomem *rbase = gic_data_rdist_rd_base();
struct page *pend_page;
+ phys_addr_t paddr;
u64 val, tmp;
- /* If we didn't allocate the pending table yet, do it now */
+ if (gic_data_rdist()->lpi_enabled)
+ return;
+
pend_page = gic_data_rdist()->pend_page;
- if (!pend_page) {
- phys_addr_t paddr;
-
- pend_page = its_allocate_pending_table(GFP_NOWAIT);
- if (!pend_page) {
- pr_err("Failed to allocate PENDBASE for CPU%d\n",
- smp_processor_id());
- return;
- }
-
- paddr = page_to_phys(pend_page);
- pr_info("CPU%d: using LPI pending table @%pa\n",
- smp_processor_id(), &paddr);
- gic_data_rdist()->pend_page = pend_page;
- }
+ paddr = page_to_phys(pend_page);
/* set PROPBASE */
val = (page_to_phys(gic_rdists->prop_page) |
@@ -2019,6 +2037,10 @@ static void its_cpu_init_lpis(void)
/* Make sure the GIC has seen the above */
dsb(sy);
+ gic_data_rdist()->lpi_enabled = true;
+ pr_info("GICv3: CPU%d: using LPI pending table @%pa\n",
+ smp_processor_id(),
+ &paddr);
}
static void its_cpu_init_collection(struct its_node *its)
@@ -3497,16 +3519,6 @@ static int redist_disable_lpis(void)
u64 timeout = USEC_PER_SEC;
u64 val;
- /*
- * If coming via a CPU hotplug event, we don't need to disable
- * LPIs before trying to re-enable them. They are already
- * configured and all is well in the world. Detect this case
- * by checking the allocation of the pending table for the
- * current CPU.
- */
- if (gic_data_rdist()->pend_page)
- return 0;
-
if (!gic_rdists_supports_plpis()) {
pr_info("CPU%d: LPIs not supported\n", smp_processor_id());
return -ENXIO;
@@ -3516,7 +3528,18 @@ static int redist_disable_lpis(void)
if (!(val & GICR_CTLR_ENABLE_LPIS))
return 0;
- pr_warn("CPU%d: Booted with LPIs enabled, memory probably corrupted\n",
+ /*
+ * If coming via a CPU hotplug event, we don't need to disable
+ * LPIs before trying to re-enable them. They are already
+ * configured and all is well in the world.
+ */
+ if (gic_data_rdist()->lpi_enabled)
+ return 0;
+
+ /*
+ * From that point on, we only try to do some damage control.
+ */
+ pr_warn("GICv3: CPU%d: Booted with LPIs enabled, memory probably corrupted\n",
smp_processor_id());
add_taint(TAINT_CRAP, LOCKDEP_STILL_OK);
@@ -3772,7 +3795,8 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
}
gic_rdists = rdists;
- err = its_alloc_lpi_tables();
+
+ err = allocate_lpi_tables();
if (err)
return err;