piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2)
* Don't call {piix,slc90e66}_dma_2_pio() for PIO modes in
{piix,slc90e66}_tune_chipset().
* Add PIO1 handling to {piix,slc90e66}_tune_chipset().
* Bump driver version.
v2:
* Remove PIO modes from {piix,slc90e66}_dma_2_pio(), they are no longer needed
there (Noticed by Sergei)
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 4f69cd0..5cfa9378 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/piix.c Version 0.50 Jun 10, 2007
+ * linux/drivers/ide/pci/piix.c Version 0.51 Jul 6, 2007
*
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
@@ -109,7 +109,7 @@
* piix_dma_2_pio - return the PIO mode matching DMA
* @xfer_rate: transfer speed
*
- * Returns the nearest equivalent PIO timing for the PIO or DMA
+ * Returns the nearest equivalent PIO timing for the DMA
* mode requested by the controller.
*/
@@ -123,20 +123,14 @@
case XFER_UDMA_1:
case XFER_UDMA_0:
case XFER_MW_DMA_2:
- case XFER_PIO_4:
return 4;
case XFER_MW_DMA_1:
- case XFER_PIO_3:
return 3;
case XFER_SW_DMA_2:
- case XFER_PIO_2:
return 2;
case XFER_MW_DMA_0:
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
- case XFER_PIO_1:
- case XFER_PIO_0:
- case XFER_PIO_SLOW:
default:
return 0;
}
@@ -269,6 +263,7 @@
case XFER_PIO_4:
case XFER_PIO_3:
case XFER_PIO_2:
+ case XFER_PIO_1:
case XFER_PIO_0: break;
default: return -1;
}
@@ -299,7 +294,11 @@
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
}
- piix_tune_pio(drive, piix_dma_2_pio(speed));
+ if (speed > XFER_PIO_4)
+ piix_tune_pio(drive, piix_dma_2_pio(speed));
+ else
+ piix_tune_pio(drive, speed - XFER_PIO_0);
+
return ide_config_drive_speed(drive, speed);
}
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index 8e655f2..628b066 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/slc90e66.c Version 0.14 February 8, 2007
+ * linux/drivers/ide/pci/slc90e66.c Version 0.15 Jul 6, 2007
*
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
@@ -29,20 +29,14 @@
case XFER_UDMA_1:
case XFER_UDMA_0:
case XFER_MW_DMA_2:
- case XFER_PIO_4:
return 4;
case XFER_MW_DMA_1:
- case XFER_PIO_3:
return 3;
case XFER_SW_DMA_2:
- case XFER_PIO_2:
return 2;
case XFER_MW_DMA_0:
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
- case XFER_PIO_1:
- case XFER_PIO_0:
- case XFER_PIO_SLOW:
default:
return 0;
}
@@ -136,6 +130,7 @@
case XFER_PIO_4:
case XFER_PIO_3:
case XFER_PIO_2:
+ case XFER_PIO_1:
case XFER_PIO_0: break;
default: return -1;
}
@@ -156,7 +151,11 @@
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
}
- slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
+ if (speed > XFER_PIO_4)
+ slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
+ else
+ slc90e66_tune_pio(drive, speed - XFER_PIO_0);
+
return ide_config_drive_speed(drive, speed);
}