tree a69825062930c503ea2adeb6aa53543c0aa0677e
parent 2a0b390b472b7be8909beb77d47db361b613cdc8
author Geert Uytterhoeven <geert+renesas@glider.be> 1575899303 +0100
committer Miquel Raynal <miquel.raynal@bootlin.com> 1580140531 +0100

mtd: maps: physmap: Add minimal Runtime PM support

Add minimal runtime PM support (enable on probe, disable on remove), to
ensure proper operation with a parent device that uses runtime PM.

This is needed on systems where the FLASH is connected to a bus
controller that is contained in a PM domain and/or has a gateable
functional clock.  In such cases, before accessing any device connected
to the external bus, the PM domain must be powered up, and/or the
functional clock must be enabled, which is typically handled through
runtime PM by the bus controller driver.

An example of this is the Renesas APE6-EVM development board, which has
an Ethernet controller and a CFI FLASH connected to the Bus State
Controller (BSC) of an R-Mobile APE6 SoC.
As long as the Ethernet driver, which had Runtime PM support since
commit 3a611e26e958b037 ("net/smsc911x: Add minimal runtime PM
support"), keeps the BSC powered, accessing the FLASH works.
When the ethernet node in r8a73a4-ape6evm.dts is disabled, the BSC is
never powered up, and the kernel crashes when trying to access the
FLASH:

    Unhandled fault: imprecise external abort (0x1406) at 0x00000000
    pgd = (ptrval)
    [00000000] *pgd=7fef2835
    Internal error: : 1406 [#1] SMP ARM
    CPU: 0 PID: 122 Comm: hd Tainted: G        W         5.5.0-rc1-ape6evm-00814-g38ca966db25b9dbd-dirty #136
    Hardware name: Generic R8A73A4 (Flattened Device Tree)
    PC is at chip_ready+0x12c/0x380
    LR is at chip_ready+0x10c/0x380

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>