Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2015-08-16
Here's what's likely the last bluetooth-next pull request for 4.3:
- 6lowpan/802.15.4 refactoring, cleanups & fixes
- Document 6lowpan netdev usage in Documentation/networking/6lowpan.txt
- Support for UART based QCA Bluetooth controllers
- Power management support for Broeadcom Bluetooth controllers
- Change LE connection initiation to always use passive scanning first
- Support for new Silicon Wave USB ID
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/Documentation/networking/6lowpan.txt b/Documentation/networking/6lowpan.txt
new file mode 100644
index 0000000..a7dc7e9
--- /dev/null
+++ b/Documentation/networking/6lowpan.txt
@@ -0,0 +1,50 @@
+
+Netdev private dataroom for 6lowpan interfaces:
+
+All 6lowpan able net devices, means all interfaces with ARPHRD_6LOWPAN,
+must have "struct lowpan_priv" placed at beginning of netdev_priv.
+
+The priv_size of each interface should be calculate by:
+
+ dev->priv_size = LOWPAN_PRIV_SIZE(LL_6LOWPAN_PRIV_DATA);
+
+Where LL_PRIV_6LOWPAN_DATA is sizeof linklayer 6lowpan private data struct.
+To access the LL_PRIV_6LOWPAN_DATA structure you can cast:
+
+ lowpan_priv(dev)-priv;
+
+to your LL_6LOWPAN_PRIV_DATA structure.
+
+Before registering the lowpan netdev interface you must run:
+
+ lowpan_netdev_setup(dev, LOWPAN_LLTYPE_FOOBAR);
+
+wheres LOWPAN_LLTYPE_FOOBAR is a define for your 6LoWPAN linklayer type of
+enum lowpan_lltypes.
+
+Example to evaluate the private usually you can do:
+
+static inline sturct lowpan_priv_foobar *
+lowpan_foobar_priv(struct net_device *dev)
+{
+ return (sturct lowpan_priv_foobar *)lowpan_priv(dev)->priv;
+}
+
+switch (dev->type) {
+case ARPHRD_6LOWPAN:
+ lowpan_priv = lowpan_priv(dev);
+ /* do great stuff which is ARPHRD_6LOWPAN related */
+ switch (lowpan_priv->lltype) {
+ case LOWPAN_LLTYPE_FOOBAR:
+ /* do 802.15.4 6LoWPAN handling here */
+ lowpan_foobar_priv(dev)->bar = foo;
+ break;
+ ...
+ }
+ break;
+...
+}
+
+In case of generic 6lowpan branch ("net/6lowpan") you can remove the check
+on ARPHRD_6LOWPAN, because you can be sure that these function are called
+by ARPHRD_6LOWPAN interfaces.
diff --git a/MAINTAINERS b/MAINTAINERS
index ca51eba..7b528b8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -158,6 +158,7 @@
S: Maintained
F: net/6lowpan/
F: include/net/6lowpan.h
+F: Documentation/networking/6lowpan.txt
6PACK NETWORK DRIVER FOR AX.25
M: Andreas Koensgen <ajk@comnets.uni-bremen.de>
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 79e8234..0bd88c9 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -13,6 +13,10 @@
tristate
select FW_LOADER
+config BT_QCA
+ tristate
+ select FW_LOADER
+
config BT_HCIBTUSB
tristate "HCI USB driver"
depends on USB
@@ -151,6 +155,19 @@
Say Y here to compile support for Broadcom protocol.
+config BT_HCIUART_QCA
+ bool "Qualcomm Atheros protocol support"
+ depends on BT_HCIUART
+ select BT_HCIUART_H4
+ select BT_QCA
+ help
+ The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
+ over serial port interface(H4) between controller and host.
+ This protocol is required for UART clock control for QCA Bluetooth
+ devices.
+
+ Say Y here to compile support for QCA protocol.
+
config BT_HCIBCM203X
tristate "HCI BCM203x USB driver"
depends on USB
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index f40e194..07c9cf3 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -22,6 +22,7 @@
obj-$(CONFIG_BT_WILINK) += btwilink.o
obj-$(CONFIG_BT_BCM) += btbcm.o
obj-$(CONFIG_BT_RTL) += btrtl.o
+obj-$(CONFIG_BT_QCA) += btqca.o
btmrvl-y := btmrvl_main.o
btmrvl-$(CONFIG_DEBUG_FS) += btmrvl_debugfs.o
@@ -34,6 +35,7 @@
hci_uart-$(CONFIG_BT_HCIUART_3WIRE) += hci_h5.o
hci_uart-$(CONFIG_BT_HCIUART_INTEL) += hci_intel.o
hci_uart-$(CONFIG_BT_HCIUART_BCM) += hci_bcm.o
+hci_uart-$(CONFIG_BT_HCIUART_QCA) += hci_qca.o
hci_uart-objs := $(hci_uart-y)
ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index b9a8119..7c09762 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -1071,8 +1071,6 @@
}
}
- sdio_release_host(card->func);
-
/*
* winner or not, with this test the FW synchronizes when the
* module can continue its initialization
@@ -1082,6 +1080,8 @@
return -ETIMEDOUT;
}
+ sdio_release_host(card->func);
+
return 0;
done:
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
new file mode 100644
index 0000000..4a62081
--- /dev/null
+++ b/drivers/bluetooth/btqca.c
@@ -0,0 +1,392 @@
+/*
+ * Bluetooth supports for Qualcomm Atheros chips
+ *
+ * Copyright (c) 2015 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/firmware.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btqca.h"
+
+#define VERSION "0.1"
+
+static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
+{
+ struct sk_buff *skb;
+ struct edl_event_hdr *edl;
+ struct rome_version *ver;
+ char cmd;
+ int err = 0;
+
+ BT_DBG("%s: ROME Patch Version Request", hdev->name);
+
+ cmd = EDL_PATCH_VER_REQ_CMD;
+ skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
+ &cmd, HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ BT_ERR("%s: Failed to read version of ROME (%d)", hdev->name,
+ err);
+ return err;
+ }
+
+ if (skb->len != sizeof(*edl) + sizeof(*ver)) {
+ BT_ERR("%s: Version size mismatch len %d", hdev->name,
+ skb->len);
+ err = -EILSEQ;
+ goto out;
+ }
+
+ edl = (struct edl_event_hdr *)(skb->data);
+ if (!edl || !edl->data) {
+ BT_ERR("%s: TLV with no header or no data", hdev->name);
+ err = -EILSEQ;
+ goto out;
+ }
+
+ if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+ edl->rtype != EDL_APP_VER_RES_EVT) {
+ BT_ERR("%s: Wrong packet received %d %d", hdev->name,
+ edl->cresp, edl->rtype);
+ err = -EIO;
+ goto out;
+ }
+
+ ver = (struct rome_version *)(edl->data);
+
+ BT_DBG("%s: Product:0x%08x", hdev->name, le32_to_cpu(ver->product_id));
+ BT_DBG("%s: Patch :0x%08x", hdev->name, le16_to_cpu(ver->patch_ver));
+ BT_DBG("%s: ROM :0x%08x", hdev->name, le16_to_cpu(ver->rome_ver));
+ BT_DBG("%s: SOC :0x%08x", hdev->name, le32_to_cpu(ver->soc_id));
+
+ /* ROME chipset version can be decided by patch and SoC
+ * version, combination with upper 2 bytes from SoC
+ * and lower 2 bytes from patch will be used.
+ */
+ *rome_version = (le32_to_cpu(ver->soc_id) << 16) |
+ (le16_to_cpu(ver->rome_ver) & 0x0000ffff);
+
+out:
+ kfree_skb(skb);
+
+ return err;
+}
+
+static int rome_reset(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ int err;
+
+ BT_DBG("%s: ROME HCI_RESET", hdev->name);
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ BT_ERR("%s: Reset failed (%d)", hdev->name, err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+
+static void rome_tlv_check_data(struct rome_config *config,
+ const struct firmware *fw)
+{
+ const u8 *data;
+ u32 type_len;
+ u16 tag_id, tag_len;
+ int idx, length;
+ struct tlv_type_hdr *tlv;
+ struct tlv_type_patch *tlv_patch;
+ struct tlv_type_nvm *tlv_nvm;
+
+ tlv = (struct tlv_type_hdr *)fw->data;
+
+ type_len = le32_to_cpu(tlv->type_len);
+ length = (type_len >> 8) & 0x00ffffff;
+
+ BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
+ BT_DBG("Length\t\t : %d bytes", length);
+
+ switch (config->type) {
+ case TLV_TYPE_PATCH:
+ tlv_patch = (struct tlv_type_patch *)tlv->data;
+ BT_DBG("Total Length\t\t : %d bytes",
+ le32_to_cpu(tlv_patch->total_size));
+ BT_DBG("Patch Data Length\t : %d bytes",
+ le32_to_cpu(tlv_patch->data_length));
+ BT_DBG("Signing Format Version : 0x%x",
+ tlv_patch->format_version);
+ BT_DBG("Signature Algorithm\t : 0x%x",
+ tlv_patch->signature);
+ BT_DBG("Reserved\t\t : 0x%x",
+ le16_to_cpu(tlv_patch->reserved1));
+ BT_DBG("Product ID\t\t : 0x%04x",
+ le16_to_cpu(tlv_patch->product_id));
+ BT_DBG("Rom Build Version\t : 0x%04x",
+ le16_to_cpu(tlv_patch->rom_build));
+ BT_DBG("Patch Version\t\t : 0x%04x",
+ le16_to_cpu(tlv_patch->patch_version));
+ BT_DBG("Reserved\t\t : 0x%x",
+ le16_to_cpu(tlv_patch->reserved2));
+ BT_DBG("Patch Entry Address\t : 0x%x",
+ le32_to_cpu(tlv_patch->entry));
+ break;
+
+ case TLV_TYPE_NVM:
+ idx = 0;
+ data = tlv->data;
+ while (idx < length) {
+ tlv_nvm = (struct tlv_type_nvm *)(data + idx);
+
+ tag_id = le16_to_cpu(tlv_nvm->tag_id);
+ tag_len = le16_to_cpu(tlv_nvm->tag_len);
+
+ /* Update NVM tags as needed */
+ switch (tag_id) {
+ case EDL_TAG_ID_HCI:
+ /* HCI transport layer parameters
+ * enabling software inband sleep
+ * onto controller side.
+ */
+ tlv_nvm->data[0] |= 0x80;
+
+ /* UART Baud Rate */
+ tlv_nvm->data[2] = config->user_baud_rate;
+
+ break;
+
+ case EDL_TAG_ID_DEEP_SLEEP:
+ /* Sleep enable mask
+ * enabling deep sleep feature on controller.
+ */
+ tlv_nvm->data[0] |= 0x01;
+
+ break;
+ }
+
+ idx += (sizeof(u16) + sizeof(u16) + 8 + tag_len);
+ }
+ break;
+
+ default:
+ BT_ERR("Unknown TLV type %d", config->type);
+ break;
+ }
+}
+
+static int rome_tlv_send_segment(struct hci_dev *hdev, int idx, int seg_size,
+ const u8 *data)
+{
+ struct sk_buff *skb;
+ struct edl_event_hdr *edl;
+ struct tlv_seg_resp *tlv_resp;
+ u8 cmd[MAX_SIZE_PER_TLV_SEGMENT + 2];
+ int err = 0;
+
+ BT_DBG("%s: Download segment #%d size %d", hdev->name, idx, seg_size);
+
+ cmd[0] = EDL_PATCH_TLV_REQ_CMD;
+ cmd[1] = seg_size;
+ memcpy(cmd + 2, data, seg_size);
+
+ skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, seg_size + 2, cmd,
+ HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ BT_ERR("%s: Failed to send TLV segment (%d)", hdev->name, err);
+ return err;
+ }
+
+ if (skb->len != sizeof(*edl) + sizeof(*tlv_resp)) {
+ BT_ERR("%s: TLV response size mismatch", hdev->name);
+ err = -EILSEQ;
+ goto out;
+ }
+
+ edl = (struct edl_event_hdr *)(skb->data);
+ if (!edl || !edl->data) {
+ BT_ERR("%s: TLV with no header or no data", hdev->name);
+ err = -EILSEQ;
+ goto out;
+ }
+
+ tlv_resp = (struct tlv_seg_resp *)(edl->data);
+
+ if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+ edl->rtype != EDL_TVL_DNLD_RES_EVT || tlv_resp->result != 0x00) {
+ BT_ERR("%s: TLV with error stat 0x%x rtype 0x%x (0x%x)",
+ hdev->name, edl->cresp, edl->rtype, tlv_resp->result);
+ err = -EIO;
+ }
+
+out:
+ kfree_skb(skb);
+
+ return err;
+}
+
+static int rome_tlv_download_request(struct hci_dev *hdev,
+ const struct firmware *fw)
+{
+ const u8 *buffer, *data;
+ int total_segment, remain_size;
+ int ret, i;
+
+ if (!fw || !fw->data)
+ return -EINVAL;
+
+ total_segment = fw->size / MAX_SIZE_PER_TLV_SEGMENT;
+ remain_size = fw->size % MAX_SIZE_PER_TLV_SEGMENT;
+
+ BT_DBG("%s: Total segment num %d remain size %d total size %zu",
+ hdev->name, total_segment, remain_size, fw->size);
+
+ data = fw->data;
+ for (i = 0; i < total_segment; i++) {
+ buffer = data + i * MAX_SIZE_PER_TLV_SEGMENT;
+ ret = rome_tlv_send_segment(hdev, i, MAX_SIZE_PER_TLV_SEGMENT,
+ buffer);
+ if (ret < 0)
+ return -EIO;
+ }
+
+ if (remain_size) {
+ buffer = data + total_segment * MAX_SIZE_PER_TLV_SEGMENT;
+ ret = rome_tlv_send_segment(hdev, total_segment, remain_size,
+ buffer);
+ if (ret < 0)
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int rome_download_firmware(struct hci_dev *hdev,
+ struct rome_config *config)
+{
+ const struct firmware *fw;
+ int ret;
+
+ BT_INFO("%s: ROME Downloading %s", hdev->name, config->fwname);
+
+ ret = request_firmware(&fw, config->fwname, &hdev->dev);
+ if (ret) {
+ BT_ERR("%s: Failed to request file: %s (%d)", hdev->name,
+ config->fwname, ret);
+ return ret;
+ }
+
+ rome_tlv_check_data(config, fw);
+
+ ret = rome_tlv_download_request(hdev, fw);
+ if (ret) {
+ BT_ERR("%s: Failed to download file: %s (%d)", hdev->name,
+ config->fwname, ret);
+ }
+
+ release_firmware(fw);
+
+ return ret;
+}
+
+int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ u8 cmd[9];
+ int err;
+
+ cmd[0] = EDL_NVM_ACCESS_SET_REQ_CMD;
+ cmd[1] = 0x02; /* TAG ID */
+ cmd[2] = sizeof(bdaddr_t); /* size */
+ memcpy(cmd + 3, bdaddr, sizeof(bdaddr_t));
+ skb = __hci_cmd_sync_ev(hdev, EDL_NVM_ACCESS_OPCODE, sizeof(cmd), cmd,
+ HCI_VENDOR_PKT, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ BT_ERR("%s: Change address command failed (%d)",
+ hdev->name, err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
+
+int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate)
+{
+ u32 rome_ver = 0;
+ struct rome_config config;
+ int err;
+
+ BT_DBG("%s: ROME setup on UART", hdev->name);
+
+ config.user_baud_rate = baudrate;
+
+ /* Get ROME version information */
+ err = rome_patch_ver_req(hdev, &rome_ver);
+ if (err < 0 || rome_ver == 0) {
+ BT_ERR("%s: Failed to get version 0x%x", hdev->name, err);
+ return err;
+ }
+
+ BT_INFO("%s: ROME controller version 0x%08x", hdev->name, rome_ver);
+
+ /* Download rampatch file */
+ config.type = TLV_TYPE_PATCH;
+ snprintf(config.fwname, sizeof(config.fwname), "qca/rampatch_%08x.bin",
+ rome_ver);
+ err = rome_download_firmware(hdev, &config);
+ if (err < 0) {
+ BT_ERR("%s: Failed to download patch (%d)", hdev->name, err);
+ return err;
+ }
+
+ /* Download NVM configuration */
+ config.type = TLV_TYPE_NVM;
+ snprintf(config.fwname, sizeof(config.fwname), "qca/nvm_%08x.bin",
+ rome_ver);
+ err = rome_download_firmware(hdev, &config);
+ if (err < 0) {
+ BT_ERR("%s: Failed to download NVM (%d)", hdev->name, err);
+ return err;
+ }
+
+ /* Perform HCI reset */
+ err = rome_reset(hdev);
+ if (err < 0) {
+ BT_ERR("%s: Failed to run HCI_RESET (%d)", hdev->name, err);
+ return err;
+ }
+
+ BT_INFO("%s: ROME setup on UART is completed", hdev->name);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qca_uart_setup_rome);
+
+MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
+MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
new file mode 100644
index 0000000..65e994b
--- /dev/null
+++ b/drivers/bluetooth/btqca.h
@@ -0,0 +1,135 @@
+/*
+ * Bluetooth supports for Qualcomm Atheros ROME chips
+ *
+ * Copyright (c) 2015 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#define EDL_PATCH_CMD_OPCODE (0xFC00)
+#define EDL_NVM_ACCESS_OPCODE (0xFC0B)
+#define EDL_PATCH_CMD_LEN (1)
+#define EDL_PATCH_VER_REQ_CMD (0x19)
+#define EDL_PATCH_TLV_REQ_CMD (0x1E)
+#define EDL_NVM_ACCESS_SET_REQ_CMD (0x01)
+#define MAX_SIZE_PER_TLV_SEGMENT (243)
+
+#define EDL_CMD_REQ_RES_EVT (0x00)
+#define EDL_PATCH_VER_RES_EVT (0x19)
+#define EDL_APP_VER_RES_EVT (0x02)
+#define EDL_TVL_DNLD_RES_EVT (0x04)
+#define EDL_CMD_EXE_STATUS_EVT (0x00)
+#define EDL_SET_BAUDRATE_RSP_EVT (0x92)
+#define EDL_NVM_ACCESS_CODE_EVT (0x0B)
+
+#define EDL_TAG_ID_HCI (17)
+#define EDL_TAG_ID_DEEP_SLEEP (27)
+
+enum qca_bardrate {
+ QCA_BAUDRATE_115200 = 0,
+ QCA_BAUDRATE_57600,
+ QCA_BAUDRATE_38400,
+ QCA_BAUDRATE_19200,
+ QCA_BAUDRATE_9600,
+ QCA_BAUDRATE_230400,
+ QCA_BAUDRATE_250000,
+ QCA_BAUDRATE_460800,
+ QCA_BAUDRATE_500000,
+ QCA_BAUDRATE_720000,
+ QCA_BAUDRATE_921600,
+ QCA_BAUDRATE_1000000,
+ QCA_BAUDRATE_1250000,
+ QCA_BAUDRATE_2000000,
+ QCA_BAUDRATE_3000000,
+ QCA_BAUDRATE_4000000,
+ QCA_BAUDRATE_1600000,
+ QCA_BAUDRATE_3200000,
+ QCA_BAUDRATE_3500000,
+ QCA_BAUDRATE_AUTO = 0xFE,
+ QCA_BAUDRATE_RESERVED
+};
+
+enum rome_tlv_type {
+ TLV_TYPE_PATCH = 1,
+ TLV_TYPE_NVM
+};
+
+struct rome_config {
+ u8 type;
+ char fwname[64];
+ uint8_t user_baud_rate;
+};
+
+struct edl_event_hdr {
+ __u8 cresp;
+ __u8 rtype;
+ __u8 data[0];
+} __packed;
+
+struct rome_version {
+ __le32 product_id;
+ __le16 patch_ver;
+ __le16 rome_ver;
+ __le32 soc_id;
+} __packed;
+
+struct tlv_seg_resp {
+ __u8 result;
+} __packed;
+
+struct tlv_type_patch {
+ __le32 total_size;
+ __le32 data_length;
+ __u8 format_version;
+ __u8 signature;
+ __le16 reserved1;
+ __le16 product_id;
+ __le16 rom_build;
+ __le16 patch_version;
+ __le16 reserved2;
+ __le32 entry;
+} __packed;
+
+struct tlv_type_nvm {
+ __le16 tag_id;
+ __le16 tag_len;
+ __le32 reserve1;
+ __le32 reserve2;
+ __u8 data[0];
+} __packed;
+
+struct tlv_type_hdr {
+ __le32 type_len;
+ __u8 data[0];
+} __packed;
+
+#if IS_ENABLED(CONFIG_BT_QCA)
+
+int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate);
+
+#else
+
+static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline int qca_uart_setup_rome(struct hci_dev *hdev, int speed)
+{
+ return -EOPNOTSUPP;
+}
+
+#endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index cc92b0f..f759dea 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -322,6 +322,9 @@
{ USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
{ USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
+ /* Silicon Wave based devices */
+ { USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
+
{ } /* Terminating entry */
};
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 23523e1..322302b 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -25,6 +25,12 @@
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/tty.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -32,11 +38,37 @@
#include "btbcm.h"
#include "hci_uart.h"
-struct bcm_data {
- struct sk_buff *rx_skb;
- struct sk_buff_head txq;
+struct bcm_device {
+ struct list_head list;
+
+ struct platform_device *pdev;
+
+ const char *name;
+ struct gpio_desc *device_wakeup;
+ struct gpio_desc *shutdown;
+
+ struct clk *clk;
+ bool clk_enabled;
+
+ u32 init_speed;
+
+#ifdef CONFIG_PM_SLEEP
+ struct hci_uart *hu;
+ bool is_suspended; /* suspend/resume flag */
+#endif
};
+struct bcm_data {
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+
+ struct bcm_device *dev;
+};
+
+/* List of BCM BT UART devices */
+static DEFINE_SPINLOCK(bcm_device_list_lock);
+static LIST_HEAD(bcm_device_list);
+
static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
{
struct hci_dev *hdev = hu->hdev;
@@ -86,9 +118,41 @@
return 0;
}
+/* bcm_device_exists should be protected by bcm_device_list_lock */
+static bool bcm_device_exists(struct bcm_device *device)
+{
+ struct list_head *p;
+
+ list_for_each(p, &bcm_device_list) {
+ struct bcm_device *dev = list_entry(p, struct bcm_device, list);
+
+ if (device == dev)
+ return true;
+ }
+
+ return false;
+}
+
+static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
+{
+ if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled)
+ clk_enable(dev->clk);
+
+ gpiod_set_value_cansleep(dev->shutdown, powered);
+ gpiod_set_value_cansleep(dev->device_wakeup, powered);
+
+ if (!powered && !IS_ERR(dev->clk) && dev->clk_enabled)
+ clk_disable(dev->clk);
+
+ dev->clk_enabled = powered;
+
+ return 0;
+}
+
static int bcm_open(struct hci_uart *hu)
{
struct bcm_data *bcm;
+ struct list_head *p;
BT_DBG("hu %p", hu);
@@ -99,6 +163,30 @@
skb_queue_head_init(&bcm->txq);
hu->priv = bcm;
+
+ spin_lock(&bcm_device_list_lock);
+ list_for_each(p, &bcm_device_list) {
+ struct bcm_device *dev = list_entry(p, struct bcm_device, list);
+
+ /* Retrieve saved bcm_device based on parent of the
+ * platform device (saved during device probe) and
+ * parent of tty device used by hci_uart
+ */
+ if (hu->tty->dev->parent == dev->pdev->dev.parent) {
+ bcm->dev = dev;
+ hu->init_speed = dev->init_speed;
+#ifdef CONFIG_PM_SLEEP
+ dev->hu = hu;
+#endif
+ break;
+ }
+ }
+
+ if (bcm->dev)
+ bcm_gpio_set_power(bcm->dev, true);
+
+ spin_unlock(&bcm_device_list_lock);
+
return 0;
}
@@ -108,6 +196,16 @@
BT_DBG("hu %p", hu);
+ /* Protect bcm->dev against removal of the device or driver */
+ spin_lock(&bcm_device_list_lock);
+ if (bcm_device_exists(bcm->dev)) {
+ bcm_gpio_set_power(bcm->dev, false);
+#ifdef CONFIG_PM_SLEEP
+ bcm->dev->hu = NULL;
+#endif
+ }
+ spin_unlock(&bcm_device_list_lock);
+
skb_queue_purge(&bcm->txq);
kfree_skb(bcm->rx_skb);
kfree(bcm);
@@ -232,6 +330,188 @@
return skb_dequeue(&bcm->txq);
}
+#ifdef CONFIG_PM_SLEEP
+/* Platform suspend callback */
+static int bcm_suspend(struct device *dev)
+{
+ struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+
+ BT_DBG("suspend (%p): is_suspended %d", bdev, bdev->is_suspended);
+
+ if (!bdev->is_suspended) {
+ hci_uart_set_flow_control(bdev->hu, true);
+
+ /* Once this callback returns, driver suspends BT via GPIO */
+ bdev->is_suspended = true;
+ }
+
+ /* Suspend the device */
+ if (bdev->device_wakeup) {
+ gpiod_set_value(bdev->device_wakeup, false);
+ BT_DBG("suspend, delaying 15 ms");
+ mdelay(15);
+ }
+
+ return 0;
+}
+
+/* Platform resume callback */
+static int bcm_resume(struct device *dev)
+{
+ struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+
+ BT_DBG("resume (%p): is_suspended %d", bdev, bdev->is_suspended);
+
+ if (bdev->device_wakeup) {
+ gpiod_set_value(bdev->device_wakeup, true);
+ BT_DBG("resume, delaying 15 ms");
+ mdelay(15);
+ }
+
+ /* When this callback executes, the device has woken up already */
+ if (bdev->is_suspended) {
+ bdev->is_suspended = false;
+
+ hci_uart_set_flow_control(bdev->hu, false);
+ }
+
+ return 0;
+}
+#endif
+
+static const struct acpi_gpio_params device_wakeup_gpios = { 0, 0, false };
+static const struct acpi_gpio_params shutdown_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_bcm_default_gpios[] = {
+ { "device-wakeup-gpios", &device_wakeup_gpios, 1 },
+ { "shutdown-gpios", &shutdown_gpios, 1 },
+ { },
+};
+
+#ifdef CONFIG_ACPI
+static int bcm_resource(struct acpi_resource *ares, void *data)
+{
+ struct bcm_device *dev = data;
+
+ if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+ struct acpi_resource_uart_serialbus *sb;
+
+ sb = &ares->data.uart_serial_bus;
+ if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART)
+ dev->init_speed = sb->default_baud_rate;
+ }
+
+ /* Always tell the ACPI core to skip this resource */
+ return 1;
+}
+
+static int bcm_acpi_probe(struct bcm_device *dev)
+{
+ struct platform_device *pdev = dev->pdev;
+ const struct acpi_device_id *id;
+ struct acpi_device *adev;
+ LIST_HEAD(resources);
+ int ret;
+
+ id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+ if (!id)
+ return -ENODEV;
+
+ /* Retrieve GPIO data */
+ dev->name = dev_name(&pdev->dev);
+ ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
+ acpi_bcm_default_gpios);
+ if (ret)
+ return ret;
+
+ dev->clk = devm_clk_get(&pdev->dev, NULL);
+
+ dev->device_wakeup = devm_gpiod_get_optional(&pdev->dev,
+ "device-wakeup",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(dev->device_wakeup))
+ return PTR_ERR(dev->device_wakeup);
+
+ dev->shutdown = devm_gpiod_get_optional(&pdev->dev, "shutdown",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(dev->shutdown))
+ return PTR_ERR(dev->shutdown);
+
+ /* Make sure at-least one of the GPIO is defined and that
+ * a name is specified for this instance
+ */
+ if ((!dev->device_wakeup && !dev->shutdown) || !dev->name) {
+ dev_err(&pdev->dev, "invalid platform data\n");
+ return -EINVAL;
+ }
+
+ /* Retrieve UART ACPI info */
+ adev = ACPI_COMPANION(&dev->pdev->dev);
+ if (!adev)
+ return 0;
+
+ acpi_dev_get_resources(adev, &resources, bcm_resource, dev);
+
+ return 0;
+}
+#else
+static int bcm_acpi_probe(struct bcm_device *dev)
+{
+ return -EINVAL;
+}
+#endif /* CONFIG_ACPI */
+
+static int bcm_probe(struct platform_device *pdev)
+{
+ struct bcm_device *dev;
+ struct acpi_device_id *pdata = pdev->dev.platform_data;
+ int ret;
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->pdev = pdev;
+
+ if (ACPI_HANDLE(&pdev->dev)) {
+ ret = bcm_acpi_probe(dev);
+ if (ret)
+ return ret;
+ } else if (pdata) {
+ dev->name = pdata->id;
+ } else {
+ return -ENODEV;
+ }
+
+ platform_set_drvdata(pdev, dev);
+
+ dev_info(&pdev->dev, "%s device registered.\n", dev->name);
+
+ /* Place this instance on the device list */
+ spin_lock(&bcm_device_list_lock);
+ list_add_tail(&dev->list, &bcm_device_list);
+ spin_unlock(&bcm_device_list_lock);
+
+ bcm_gpio_set_power(dev, false);
+
+ return 0;
+}
+
+static int bcm_remove(struct platform_device *pdev)
+{
+ struct bcm_device *dev = platform_get_drvdata(pdev);
+
+ spin_lock(&bcm_device_list_lock);
+ list_del(&dev->list);
+ spin_unlock(&bcm_device_list_lock);
+
+ acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
+
+ dev_info(&pdev->dev, "%s device unregistered.\n", dev->name);
+
+ return 0;
+}
+
static const struct hci_uart_proto bcm_proto = {
.id = HCI_UART_BCM,
.name = "BCM",
@@ -247,12 +527,38 @@
.dequeue = bcm_dequeue,
};
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id bcm_acpi_match[] = {
+ { "BCM2E39", 0 },
+ { "BCM2E67", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, bcm_acpi_match);
+#endif
+
+/* Platform suspend and resume callbacks */
+static SIMPLE_DEV_PM_OPS(bcm_pm_ops, bcm_suspend, bcm_resume);
+
+static struct platform_driver bcm_driver = {
+ .probe = bcm_probe,
+ .remove = bcm_remove,
+ .driver = {
+ .name = "hci_bcm",
+ .acpi_match_table = ACPI_PTR(bcm_acpi_match),
+ .pm = &bcm_pm_ops,
+ },
+};
+
int __init bcm_init(void)
{
+ platform_driver_register(&bcm_driver);
+
return hci_uart_register_proto(&bcm_proto);
}
int __exit bcm_deinit(void)
{
+ platform_driver_unregister(&bcm_driver);
+
return hci_uart_unregister_proto(&bcm_proto);
}
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 20c2ac1..0d5a05a 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -810,6 +810,9 @@
#ifdef CONFIG_BT_HCIUART_BCM
bcm_init();
#endif
+#ifdef CONFIG_BT_HCIUART_QCA
+ qca_init();
+#endif
return 0;
}
@@ -839,6 +842,9 @@
#ifdef CONFIG_BT_HCIUART_BCM
bcm_deinit();
#endif
+#ifdef CONFIG_BT_HCIUART_QCA
+ qca_deinit();
+#endif
/* Release tty registration of line discipline */
err = tty_unregister_ldisc(N_HCI);
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
new file mode 100644
index 0000000..6b9b912
--- /dev/null
+++ b/drivers/bluetooth/hci_qca.c
@@ -0,0 +1,969 @@
+/*
+ * Bluetooth Software UART Qualcomm protocol
+ *
+ * HCI_IBS (HCI In-Band Sleep) is Qualcomm's power management
+ * protocol extension to H4.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (c) 2010, 2012 The Linux Foundation. All rights reserved.
+ *
+ * Acknowledgements:
+ * This file is based on hci_ll.c, which was...
+ * Written by Ohad Ben-Cohen <ohad@bencohen.org>
+ * which was in turn based on hci_h4.c, which was written
+ * by Maxim Krasnyansky and Marcel Holtmann.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include "btqca.h"
+
+/* HCI_IBS protocol messages */
+#define HCI_IBS_SLEEP_IND 0xFE
+#define HCI_IBS_WAKE_IND 0xFD
+#define HCI_IBS_WAKE_ACK 0xFC
+#define HCI_MAX_IBS_SIZE 10
+
+/* Controller states */
+#define STATE_IN_BAND_SLEEP_ENABLED 1
+
+#define IBS_WAKE_RETRANS_TIMEOUT_MS 100
+#define IBS_TX_IDLE_TIMEOUT_MS 2000
+#define BAUDRATE_SETTLE_TIMEOUT_MS 300
+
+/* HCI_IBS transmit side sleep protocol states */
+enum tx_ibs_states {
+ HCI_IBS_TX_ASLEEP,
+ HCI_IBS_TX_WAKING,
+ HCI_IBS_TX_AWAKE,
+};
+
+/* HCI_IBS receive side sleep protocol states */
+enum rx_states {
+ HCI_IBS_RX_ASLEEP,
+ HCI_IBS_RX_AWAKE,
+};
+
+/* HCI_IBS transmit and receive side clock state vote */
+enum hci_ibs_clock_state_vote {
+ HCI_IBS_VOTE_STATS_UPDATE,
+ HCI_IBS_TX_VOTE_CLOCK_ON,
+ HCI_IBS_TX_VOTE_CLOCK_OFF,
+ HCI_IBS_RX_VOTE_CLOCK_ON,
+ HCI_IBS_RX_VOTE_CLOCK_OFF,
+};
+
+struct qca_data {
+ struct hci_uart *hu;
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+ struct sk_buff_head tx_wait_q; /* HCI_IBS wait queue */
+ spinlock_t hci_ibs_lock; /* HCI_IBS state lock */
+ u8 tx_ibs_state; /* HCI_IBS transmit side power state*/
+ u8 rx_ibs_state; /* HCI_IBS receive side power state */
+ u32 tx_vote; /* Clock must be on for TX */
+ u32 rx_vote; /* Clock must be on for RX */
+ struct timer_list tx_idle_timer;
+ u32 tx_idle_delay;
+ struct timer_list wake_retrans_timer;
+ u32 wake_retrans;
+ struct workqueue_struct *workqueue;
+ struct work_struct ws_awake_rx;
+ struct work_struct ws_awake_device;
+ struct work_struct ws_rx_vote_off;
+ struct work_struct ws_tx_vote_off;
+ unsigned long flags;
+
+ /* For debugging purpose */
+ u64 ibs_sent_wacks;
+ u64 ibs_sent_slps;
+ u64 ibs_sent_wakes;
+ u64 ibs_recv_wacks;
+ u64 ibs_recv_slps;
+ u64 ibs_recv_wakes;
+ u64 vote_last_jif;
+ u32 vote_on_ms;
+ u32 vote_off_ms;
+ u64 tx_votes_on;
+ u64 rx_votes_on;
+ u64 tx_votes_off;
+ u64 rx_votes_off;
+ u64 votes_on;
+ u64 votes_off;
+};
+
+static void __serial_clock_on(struct tty_struct *tty)
+{
+ /* TODO: Some chipset requires to enable UART clock on client
+ * side to save power consumption or manual work is required.
+ * Please put your code to control UART clock here if needed
+ */
+}
+
+static void __serial_clock_off(struct tty_struct *tty)
+{
+ /* TODO: Some chipset requires to disable UART clock on client
+ * side to save power consumption or manual work is required.
+ * Please put your code to control UART clock off here if needed
+ */
+}
+
+/* serial_clock_vote needs to be called with the ibs lock held */
+static void serial_clock_vote(unsigned long vote, struct hci_uart *hu)
+{
+ struct qca_data *qca = hu->priv;
+ unsigned int diff;
+
+ bool old_vote = (qca->tx_vote | qca->rx_vote);
+ bool new_vote;
+
+ switch (vote) {
+ case HCI_IBS_VOTE_STATS_UPDATE:
+ diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
+
+ if (old_vote)
+ qca->vote_off_ms += diff;
+ else
+ qca->vote_on_ms += diff;
+ return;
+
+ case HCI_IBS_TX_VOTE_CLOCK_ON:
+ qca->tx_vote = true;
+ qca->tx_votes_on++;
+ new_vote = true;
+ break;
+
+ case HCI_IBS_RX_VOTE_CLOCK_ON:
+ qca->rx_vote = true;
+ qca->rx_votes_on++;
+ new_vote = true;
+ break;
+
+ case HCI_IBS_TX_VOTE_CLOCK_OFF:
+ qca->tx_vote = false;
+ qca->tx_votes_off++;
+ new_vote = qca->rx_vote | qca->tx_vote;
+ break;
+
+ case HCI_IBS_RX_VOTE_CLOCK_OFF:
+ qca->rx_vote = false;
+ qca->rx_votes_off++;
+ new_vote = qca->rx_vote | qca->tx_vote;
+ break;
+
+ default:
+ BT_ERR("Voting irregularity");
+ return;
+ }
+
+ if (new_vote != old_vote) {
+ if (new_vote)
+ __serial_clock_on(hu->tty);
+ else
+ __serial_clock_off(hu->tty);
+
+ BT_DBG("Vote serial clock %s(%s)", new_vote? "true" : "false",
+ vote? "true" : "false");
+
+ diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
+
+ if (new_vote) {
+ qca->votes_on++;
+ qca->vote_off_ms += diff;
+ } else {
+ qca->votes_off++;
+ qca->vote_on_ms += diff;
+ }
+ qca->vote_last_jif = jiffies;
+ }
+}
+
+/* Builds and sends an HCI_IBS command packet.
+ * These are very simple packets with only 1 cmd byte.
+ */
+static int send_hci_ibs_cmd(u8 cmd, struct hci_uart *hu)
+{
+ int err = 0;
+ struct sk_buff *skb = NULL;
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p send hci ibs cmd 0x%x", hu, cmd);
+
+ skb = bt_skb_alloc(1, GFP_ATOMIC);
+ if (!skb) {
+ BT_ERR("Failed to allocate memory for HCI_IBS packet");
+ return -ENOMEM;
+ }
+
+ /* Assign HCI_IBS type */
+ *skb_put(skb, 1) = cmd;
+
+ skb_queue_tail(&qca->txq, skb);
+
+ return err;
+}
+
+static void qca_wq_awake_device(struct work_struct *work)
+{
+ struct qca_data *qca = container_of(work, struct qca_data,
+ ws_awake_device);
+ struct hci_uart *hu = qca->hu;
+ unsigned long retrans_delay;
+
+ BT_DBG("hu %p wq awake device", hu);
+
+ /* Vote for serial clock */
+ serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_ON, hu);
+
+ spin_lock(&qca->hci_ibs_lock);
+
+ /* Send wake indication to device */
+ if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0)
+ BT_ERR("Failed to send WAKE to device");
+
+ qca->ibs_sent_wakes++;
+
+ /* Start retransmit timer */
+ retrans_delay = msecs_to_jiffies(qca->wake_retrans);
+ mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
+
+ spin_unlock(&qca->hci_ibs_lock);
+
+ /* Actually send the packets */
+ hci_uart_tx_wakeup(hu);
+}
+
+static void qca_wq_awake_rx(struct work_struct *work)
+{
+ struct qca_data *qca = container_of(work, struct qca_data,
+ ws_awake_rx);
+ struct hci_uart *hu = qca->hu;
+
+ BT_DBG("hu %p wq awake rx", hu);
+
+ serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_ON, hu);
+
+ spin_lock(&qca->hci_ibs_lock);
+ qca->rx_ibs_state = HCI_IBS_RX_AWAKE;
+
+ /* Always acknowledge device wake up,
+ * sending IBS message doesn't count as TX ON.
+ */
+ if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0)
+ BT_ERR("Failed to acknowledge device wake up");
+
+ qca->ibs_sent_wacks++;
+
+ spin_unlock(&qca->hci_ibs_lock);
+
+ /* Actually send the packets */
+ hci_uart_tx_wakeup(hu);
+}
+
+static void qca_wq_serial_rx_clock_vote_off(struct work_struct *work)
+{
+ struct qca_data *qca = container_of(work, struct qca_data,
+ ws_rx_vote_off);
+ struct hci_uart *hu = qca->hu;
+
+ BT_DBG("hu %p rx clock vote off", hu);
+
+ serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_OFF, hu);
+}
+
+static void qca_wq_serial_tx_clock_vote_off(struct work_struct *work)
+{
+ struct qca_data *qca = container_of(work, struct qca_data,
+ ws_tx_vote_off);
+ struct hci_uart *hu = qca->hu;
+
+ BT_DBG("hu %p tx clock vote off", hu);
+
+ /* Run HCI tx handling unlocked */
+ hci_uart_tx_wakeup(hu);
+
+ /* Now that message queued to tty driver, vote for tty clocks off.
+ * It is up to the tty driver to pend the clocks off until tx done.
+ */
+ serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_OFF, hu);
+}
+
+static void hci_ibs_tx_idle_timeout(unsigned long arg)
+{
+ struct hci_uart *hu = (struct hci_uart *)arg;
+ struct qca_data *qca = hu->priv;
+ unsigned long flags;
+
+ BT_DBG("hu %p idle timeout in %d state", hu, qca->tx_ibs_state);
+
+ spin_lock_irqsave_nested(&qca->hci_ibs_lock,
+ flags, SINGLE_DEPTH_NESTING);
+
+ switch (qca->tx_ibs_state) {
+ case HCI_IBS_TX_AWAKE:
+ /* TX_IDLE, go to SLEEP */
+ if (send_hci_ibs_cmd(HCI_IBS_SLEEP_IND, hu) < 0) {
+ BT_ERR("Failed to send SLEEP to device");
+ break;
+ }
+ qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
+ qca->ibs_sent_slps++;
+ queue_work(qca->workqueue, &qca->ws_tx_vote_off);
+ break;
+
+ case HCI_IBS_TX_ASLEEP:
+ case HCI_IBS_TX_WAKING:
+ /* Fall through */
+
+ default:
+ BT_ERR("Spurrious timeout tx state %d", qca->tx_ibs_state);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+}
+
+static void hci_ibs_wake_retrans_timeout(unsigned long arg)
+{
+ struct hci_uart *hu = (struct hci_uart *)arg;
+ struct qca_data *qca = hu->priv;
+ unsigned long flags, retrans_delay;
+ unsigned long retransmit = 0;
+
+ BT_DBG("hu %p wake retransmit timeout in %d state",
+ hu, qca->tx_ibs_state);
+
+ spin_lock_irqsave_nested(&qca->hci_ibs_lock,
+ flags, SINGLE_DEPTH_NESTING);
+
+ switch (qca->tx_ibs_state) {
+ case HCI_IBS_TX_WAKING:
+ /* No WAKE_ACK, retransmit WAKE */
+ retransmit = 1;
+ if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0) {
+ BT_ERR("Failed to acknowledge device wake up");
+ break;
+ }
+ qca->ibs_sent_wakes++;
+ retrans_delay = msecs_to_jiffies(qca->wake_retrans);
+ mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
+ break;
+
+ case HCI_IBS_TX_ASLEEP:
+ case HCI_IBS_TX_AWAKE:
+ /* Fall through */
+
+ default:
+ BT_ERR("Spurrious timeout tx state %d", qca->tx_ibs_state);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+ if (retransmit)
+ hci_uart_tx_wakeup(hu);
+}
+
+/* Initialize protocol */
+static int qca_open(struct hci_uart *hu)
+{
+ struct qca_data *qca;
+
+ BT_DBG("hu %p qca_open", hu);
+
+ qca = kzalloc(sizeof(struct qca_data), GFP_ATOMIC);
+ if (!qca)
+ return -ENOMEM;
+
+ skb_queue_head_init(&qca->txq);
+ skb_queue_head_init(&qca->tx_wait_q);
+ spin_lock_init(&qca->hci_ibs_lock);
+ qca->workqueue = create_singlethread_workqueue("qca_wq");
+ if (!qca->workqueue) {
+ BT_ERR("QCA Workqueue not initialized properly");
+ kfree(qca);
+ return -ENOMEM;
+ }
+
+ INIT_WORK(&qca->ws_awake_rx, qca_wq_awake_rx);
+ INIT_WORK(&qca->ws_awake_device, qca_wq_awake_device);
+ INIT_WORK(&qca->ws_rx_vote_off, qca_wq_serial_rx_clock_vote_off);
+ INIT_WORK(&qca->ws_tx_vote_off, qca_wq_serial_tx_clock_vote_off);
+
+ qca->hu = hu;
+
+ /* Assume we start with both sides asleep -- extra wakes OK */
+ qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
+ qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
+
+ /* clocks actually on, but we start votes off */
+ qca->tx_vote = false;
+ qca->rx_vote = false;
+ qca->flags = 0;
+
+ qca->ibs_sent_wacks = 0;
+ qca->ibs_sent_slps = 0;
+ qca->ibs_sent_wakes = 0;
+ qca->ibs_recv_wacks = 0;
+ qca->ibs_recv_slps = 0;
+ qca->ibs_recv_wakes = 0;
+ qca->vote_last_jif = jiffies;
+ qca->vote_on_ms = 0;
+ qca->vote_off_ms = 0;
+ qca->votes_on = 0;
+ qca->votes_off = 0;
+ qca->tx_votes_on = 0;
+ qca->tx_votes_off = 0;
+ qca->rx_votes_on = 0;
+ qca->rx_votes_off = 0;
+
+ hu->priv = qca;
+
+ init_timer(&qca->wake_retrans_timer);
+ qca->wake_retrans_timer.function = hci_ibs_wake_retrans_timeout;
+ qca->wake_retrans_timer.data = (u_long)hu;
+ qca->wake_retrans = IBS_WAKE_RETRANS_TIMEOUT_MS;
+
+ init_timer(&qca->tx_idle_timer);
+ qca->tx_idle_timer.function = hci_ibs_tx_idle_timeout;
+ qca->tx_idle_timer.data = (u_long)hu;
+ qca->tx_idle_delay = IBS_TX_IDLE_TIMEOUT_MS;
+
+ BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
+ qca->tx_idle_delay, qca->wake_retrans);
+
+ return 0;
+}
+
+static void qca_debugfs_init(struct hci_dev *hdev)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct qca_data *qca = hu->priv;
+ struct dentry *ibs_dir;
+ umode_t mode;
+
+ if (!hdev->debugfs)
+ return;
+
+ ibs_dir = debugfs_create_dir("ibs", hdev->debugfs);
+
+ /* read only */
+ mode = S_IRUGO;
+ debugfs_create_u8("tx_ibs_state", mode, ibs_dir, &qca->tx_ibs_state);
+ debugfs_create_u8("rx_ibs_state", mode, ibs_dir, &qca->rx_ibs_state);
+ debugfs_create_u64("ibs_sent_sleeps", mode, ibs_dir,
+ &qca->ibs_sent_slps);
+ debugfs_create_u64("ibs_sent_wakes", mode, ibs_dir,
+ &qca->ibs_sent_wakes);
+ debugfs_create_u64("ibs_sent_wake_acks", mode, ibs_dir,
+ &qca->ibs_sent_wacks);
+ debugfs_create_u64("ibs_recv_sleeps", mode, ibs_dir,
+ &qca->ibs_recv_slps);
+ debugfs_create_u64("ibs_recv_wakes", mode, ibs_dir,
+ &qca->ibs_recv_wakes);
+ debugfs_create_u64("ibs_recv_wake_acks", mode, ibs_dir,
+ &qca->ibs_recv_wacks);
+ debugfs_create_bool("tx_vote", mode, ibs_dir, &qca->tx_vote);
+ debugfs_create_u64("tx_votes_on", mode, ibs_dir, &qca->tx_votes_on);
+ debugfs_create_u64("tx_votes_off", mode, ibs_dir, &qca->tx_votes_off);
+ debugfs_create_bool("rx_vote", mode, ibs_dir, &qca->rx_vote);
+ debugfs_create_u64("rx_votes_on", mode, ibs_dir, &qca->rx_votes_on);
+ debugfs_create_u64("rx_votes_off", mode, ibs_dir, &qca->rx_votes_off);
+ debugfs_create_u64("votes_on", mode, ibs_dir, &qca->votes_on);
+ debugfs_create_u64("votes_off", mode, ibs_dir, &qca->votes_off);
+ debugfs_create_u32("vote_on_ms", mode, ibs_dir, &qca->vote_on_ms);
+ debugfs_create_u32("vote_off_ms", mode, ibs_dir, &qca->vote_off_ms);
+
+ /* read/write */
+ mode = S_IRUGO | S_IWUSR;
+ debugfs_create_u32("wake_retrans", mode, ibs_dir, &qca->wake_retrans);
+ debugfs_create_u32("tx_idle_delay", mode, ibs_dir,
+ &qca->tx_idle_delay);
+}
+
+/* Flush protocol data */
+static int qca_flush(struct hci_uart *hu)
+{
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p qca flush", hu);
+
+ skb_queue_purge(&qca->tx_wait_q);
+ skb_queue_purge(&qca->txq);
+
+ return 0;
+}
+
+/* Close protocol */
+static int qca_close(struct hci_uart *hu)
+{
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p qca close", hu);
+
+ serial_clock_vote(HCI_IBS_VOTE_STATS_UPDATE, hu);
+
+ skb_queue_purge(&qca->tx_wait_q);
+ skb_queue_purge(&qca->txq);
+ del_timer(&qca->tx_idle_timer);
+ del_timer(&qca->wake_retrans_timer);
+ destroy_workqueue(qca->workqueue);
+ qca->hu = NULL;
+
+ kfree_skb(qca->rx_skb);
+
+ hu->priv = NULL;
+
+ kfree(qca);
+
+ return 0;
+}
+
+/* Called upon a wake-up-indication from the device.
+ */
+static void device_want_to_wakeup(struct hci_uart *hu)
+{
+ unsigned long flags;
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p want to wake up", hu);
+
+ spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+ qca->ibs_recv_wakes++;
+
+ switch (qca->rx_ibs_state) {
+ case HCI_IBS_RX_ASLEEP:
+ /* Make sure clock is on - we may have turned clock off since
+ * receiving the wake up indicator awake rx clock.
+ */
+ queue_work(qca->workqueue, &qca->ws_awake_rx);
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+ return;
+
+ case HCI_IBS_RX_AWAKE:
+ /* Always acknowledge device wake up,
+ * sending IBS message doesn't count as TX ON.
+ */
+ if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0) {
+ BT_ERR("Failed to acknowledge device wake up");
+ break;
+ }
+ qca->ibs_sent_wacks++;
+ break;
+
+ default:
+ /* Any other state is illegal */
+ BT_ERR("Received HCI_IBS_WAKE_IND in rx state %d",
+ qca->rx_ibs_state);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+ /* Actually send the packets */
+ hci_uart_tx_wakeup(hu);
+}
+
+/* Called upon a sleep-indication from the device.
+ */
+static void device_want_to_sleep(struct hci_uart *hu)
+{
+ unsigned long flags;
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p want to sleep", hu);
+
+ spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+ qca->ibs_recv_slps++;
+
+ switch (qca->rx_ibs_state) {
+ case HCI_IBS_RX_AWAKE:
+ /* Update state */
+ qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
+ /* Vote off rx clock under workqueue */
+ queue_work(qca->workqueue, &qca->ws_rx_vote_off);
+ break;
+
+ case HCI_IBS_RX_ASLEEP:
+ /* Fall through */
+
+ default:
+ /* Any other state is illegal */
+ BT_ERR("Received HCI_IBS_SLEEP_IND in rx state %d",
+ qca->rx_ibs_state);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+}
+
+/* Called upon wake-up-acknowledgement from the device
+ */
+static void device_woke_up(struct hci_uart *hu)
+{
+ unsigned long flags, idle_delay;
+ struct qca_data *qca = hu->priv;
+ struct sk_buff *skb = NULL;
+
+ BT_DBG("hu %p woke up", hu);
+
+ spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+ qca->ibs_recv_wacks++;
+
+ switch (qca->tx_ibs_state) {
+ case HCI_IBS_TX_AWAKE:
+ /* Expect one if we send 2 WAKEs */
+ BT_DBG("Received HCI_IBS_WAKE_ACK in tx state %d",
+ qca->tx_ibs_state);
+ break;
+
+ case HCI_IBS_TX_WAKING:
+ /* Send pending packets */
+ while ((skb = skb_dequeue(&qca->tx_wait_q)))
+ skb_queue_tail(&qca->txq, skb);
+
+ /* Switch timers and change state to HCI_IBS_TX_AWAKE */
+ del_timer(&qca->wake_retrans_timer);
+ idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
+ mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
+ qca->tx_ibs_state = HCI_IBS_TX_AWAKE;
+ break;
+
+ case HCI_IBS_TX_ASLEEP:
+ /* Fall through */
+
+ default:
+ BT_ERR("Received HCI_IBS_WAKE_ACK in tx state %d",
+ qca->tx_ibs_state);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+ /* Actually send the packets */
+ hci_uart_tx_wakeup(hu);
+}
+
+/* Enqueue frame for transmittion (padding, crc, etc) may be called from
+ * two simultaneous tasklets.
+ */
+static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+ unsigned long flags = 0, idle_delay;
+ struct qca_data *qca = hu->priv;
+
+ BT_DBG("hu %p qca enq skb %p tx_ibs_state %d", hu, skb,
+ qca->tx_ibs_state);
+
+ /* Prepend skb with frame type */
+ memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+
+ /* Don't go to sleep in middle of patch download or
+ * Out-Of-Band(GPIOs control) sleep is selected.
+ */
+ if (!test_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
+ skb_queue_tail(&qca->txq, skb);
+ return 0;
+ }
+
+ spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+ /* Act according to current state */
+ switch (qca->tx_ibs_state) {
+ case HCI_IBS_TX_AWAKE:
+ BT_DBG("Device awake, sending normally");
+ skb_queue_tail(&qca->txq, skb);
+ idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
+ mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
+ break;
+
+ case HCI_IBS_TX_ASLEEP:
+ BT_DBG("Device asleep, waking up and queueing packet");
+ /* Save packet for later */
+ skb_queue_tail(&qca->tx_wait_q, skb);
+
+ qca->tx_ibs_state = HCI_IBS_TX_WAKING;
+ /* Schedule a work queue to wake up device */
+ queue_work(qca->workqueue, &qca->ws_awake_device);
+ break;
+
+ case HCI_IBS_TX_WAKING:
+ BT_DBG("Device waking up, queueing packet");
+ /* Transient state; just keep packet for later */
+ skb_queue_tail(&qca->tx_wait_q, skb);
+ break;
+
+ default:
+ BT_ERR("Illegal tx state: %d (losing packet)",
+ qca->tx_ibs_state);
+ kfree_skb(skb);
+ break;
+ }
+
+ spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+ return 0;
+}
+
+static int qca_ibs_sleep_ind(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+
+ BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_SLEEP_IND);
+
+ device_want_to_sleep(hu);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static int qca_ibs_wake_ind(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+
+ BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_IND);
+
+ device_want_to_wakeup(hu);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+
+ BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_ACK);
+
+ device_woke_up(hu);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+#define QCA_IBS_SLEEP_IND_EVENT \
+ .type = HCI_IBS_SLEEP_IND, \
+ .hlen = 0, \
+ .loff = 0, \
+ .lsize = 0, \
+ .maxlen = HCI_MAX_IBS_SIZE
+
+#define QCA_IBS_WAKE_IND_EVENT \
+ .type = HCI_IBS_WAKE_IND, \
+ .hlen = 0, \
+ .loff = 0, \
+ .lsize = 0, \
+ .maxlen = HCI_MAX_IBS_SIZE
+
+#define QCA_IBS_WAKE_ACK_EVENT \
+ .type = HCI_IBS_WAKE_ACK, \
+ .hlen = 0, \
+ .loff = 0, \
+ .lsize = 0, \
+ .maxlen = HCI_MAX_IBS_SIZE
+
+static const struct h4_recv_pkt qca_recv_pkts[] = {
+ { H4_RECV_ACL, .recv = hci_recv_frame },
+ { H4_RECV_SCO, .recv = hci_recv_frame },
+ { H4_RECV_EVENT, .recv = hci_recv_frame },
+ { QCA_IBS_WAKE_IND_EVENT, .recv = qca_ibs_wake_ind },
+ { QCA_IBS_WAKE_ACK_EVENT, .recv = qca_ibs_wake_ack },
+ { QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind },
+};
+
+static int qca_recv(struct hci_uart *hu, const void *data, int count)
+{
+ struct qca_data *qca = hu->priv;
+
+ if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+ return -EUNATCH;
+
+ qca->rx_skb = h4_recv_buf(hu->hdev, qca->rx_skb, data, count,
+ qca_recv_pkts, ARRAY_SIZE(qca_recv_pkts));
+ if (IS_ERR(qca->rx_skb)) {
+ int err = PTR_ERR(qca->rx_skb);
+ BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ qca->rx_skb = NULL;
+ return err;
+ }
+
+ return count;
+}
+
+static struct sk_buff *qca_dequeue(struct hci_uart *hu)
+{
+ struct qca_data *qca = hu->priv;
+
+ return skb_dequeue(&qca->txq);
+}
+
+static uint8_t qca_get_baudrate_value(int speed)
+{
+ switch(speed) {
+ case 9600:
+ return QCA_BAUDRATE_9600;
+ case 19200:
+ return QCA_BAUDRATE_19200;
+ case 38400:
+ return QCA_BAUDRATE_38400;
+ case 57600:
+ return QCA_BAUDRATE_57600;
+ case 115200:
+ return QCA_BAUDRATE_115200;
+ case 230400:
+ return QCA_BAUDRATE_230400;
+ case 460800:
+ return QCA_BAUDRATE_460800;
+ case 500000:
+ return QCA_BAUDRATE_500000;
+ case 921600:
+ return QCA_BAUDRATE_921600;
+ case 1000000:
+ return QCA_BAUDRATE_1000000;
+ case 2000000:
+ return QCA_BAUDRATE_2000000;
+ case 3000000:
+ return QCA_BAUDRATE_3000000;
+ case 3500000:
+ return QCA_BAUDRATE_3500000;
+ default:
+ return QCA_BAUDRATE_115200;
+ }
+}
+
+static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ struct qca_data *qca = hu->priv;
+ struct sk_buff *skb;
+ u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
+
+ if (baudrate > QCA_BAUDRATE_3000000)
+ return -EINVAL;
+
+ cmd[4] = baudrate;
+
+ skb = bt_skb_alloc(sizeof(cmd), GFP_ATOMIC);
+ if (!skb) {
+ BT_ERR("Failed to allocate memory for baudrate packet");
+ return -ENOMEM;
+ }
+
+ /* Assign commands to change baudrate and packet type. */
+ memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
+ bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
+
+ skb_queue_tail(&qca->txq, skb);
+ hci_uart_tx_wakeup(hu);
+
+ /* wait 300ms to change new baudrate on controller side
+ * controller will come back after they receive this HCI command
+ * then host can communicate with new baudrate to controller
+ */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(msecs_to_jiffies(BAUDRATE_SETTLE_TIMEOUT_MS));
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ return 0;
+}
+
+static int qca_setup(struct hci_uart *hu)
+{
+ struct hci_dev *hdev = hu->hdev;
+ struct qca_data *qca = hu->priv;
+ unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
+ int ret;
+
+ BT_INFO("%s: ROME setup", hdev->name);
+
+ /* Patch downloading has to be done without IBS mode */
+ clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+
+ /* Setup initial baudrate */
+ speed = 0;
+ if (hu->init_speed)
+ speed = hu->init_speed;
+ else if (hu->proto->init_speed)
+ speed = hu->proto->init_speed;
+
+ if (speed)
+ hci_uart_set_baudrate(hu, speed);
+
+ /* Setup user speed if needed */
+ speed = 0;
+ if (hu->oper_speed)
+ speed = hu->oper_speed;
+ else if (hu->proto->oper_speed)
+ speed = hu->proto->oper_speed;
+
+ if (speed) {
+ qca_baudrate = qca_get_baudrate_value(speed);
+
+ BT_INFO("%s: Set UART speed to %d", hdev->name, speed);
+ ret = qca_set_baudrate(hdev, qca_baudrate);
+ if (ret) {
+ BT_ERR("%s: Failed to change the baud rate (%d)",
+ hdev->name, ret);
+ return ret;
+ }
+ hci_uart_set_baudrate(hu, speed);
+ }
+
+ /* Setup patch / NVM configurations */
+ ret = qca_uart_setup_rome(hdev, qca_baudrate);
+ if (!ret) {
+ set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+ qca_debugfs_init(hdev);
+ }
+
+ /* Setup bdaddr */
+ hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+
+ return ret;
+}
+
+static struct hci_uart_proto qca_proto = {
+ .id = HCI_UART_QCA,
+ .name = "QCA",
+ .init_speed = 115200,
+ .oper_speed = 3000000,
+ .open = qca_open,
+ .close = qca_close,
+ .flush = qca_flush,
+ .setup = qca_setup,
+ .recv = qca_recv,
+ .enqueue = qca_enqueue,
+ .dequeue = qca_dequeue,
+};
+
+int __init qca_init(void)
+{
+ return hci_uart_register_proto(&qca_proto);
+}
+
+int __exit qca_deinit(void)
+{
+ return hci_uart_unregister_proto(&qca_proto);
+}
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 496587a..495b9ef 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -35,7 +35,7 @@
#define HCIUARTGETFLAGS _IOR('U', 204, int)
/* UART protocols */
-#define HCI_UART_MAX_PROTO 8
+#define HCI_UART_MAX_PROTO 9
#define HCI_UART_H4 0
#define HCI_UART_BCSP 1
@@ -45,6 +45,7 @@
#define HCI_UART_ATH3K 5
#define HCI_UART_INTEL 6
#define HCI_UART_BCM 7
+#define HCI_UART_QCA 8
#define HCI_UART_RAW_DEVICE 0
#define HCI_UART_RESET_ON_INIT 1
@@ -176,3 +177,8 @@
int bcm_init(void);
int bcm_deinit(void);
#endif
+
+#ifdef CONFIG_BT_HCIUART_QCA
+int qca_init(void);
+int qca_deinit(void);
+#endif
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index d0d5bf6..6422caa 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -97,9 +97,7 @@
struct at86rf230_state_change irq;
- bool tx_aret;
unsigned long cal_timeout;
- s8 max_frame_retries;
bool is_tx;
bool is_tx_from_off;
u8 tx_retry;
@@ -651,7 +649,7 @@
enable_irq(ctx->irq);
- ieee802154_xmit_complete(lp->hw, lp->tx_skb, !lp->tx_aret);
+ ieee802154_xmit_complete(lp->hw, lp->tx_skb, false);
}
static void
@@ -760,17 +758,10 @@
{
if (lp->is_tx) {
lp->is_tx = 0;
-
- if (lp->tx_aret)
- at86rf230_async_state_change(lp, &lp->irq,
- STATE_FORCE_TX_ON,
- at86rf230_tx_trac_status,
- true);
- else
- at86rf230_async_state_change(lp, &lp->irq,
- STATE_RX_AACK_ON,
- at86rf230_tx_complete,
- true);
+ at86rf230_async_state_change(lp, &lp->irq,
+ STATE_FORCE_TX_ON,
+ at86rf230_tx_trac_status,
+ true);
} else {
at86rf230_async_read_reg(lp, RG_TRX_STATE, &lp->irq,
at86rf230_rx_trac_check, true);
@@ -876,24 +867,16 @@
struct at86rf230_state_change *ctx = context;
struct at86rf230_local *lp = ctx->lp;
- /* In ARET mode we need to go into STATE_TX_ARET_ON after we
- * are in STATE_TX_ON. The pfad differs here, so we change
- * the complete handler.
- */
- if (lp->tx_aret) {
- if (lp->is_tx_from_off) {
- lp->is_tx_from_off = false;
- at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
- at86rf230_write_frame,
- false);
- } else {
- at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
- at86rf230_xmit_tx_on,
- false);
- }
+ /* check if we change from off state */
+ if (lp->is_tx_from_off) {
+ lp->is_tx_from_off = false;
+ at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
+ at86rf230_write_frame,
+ false);
} else {
at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
- at86rf230_write_frame, false);
+ at86rf230_xmit_tx_on,
+ false);
}
}
@@ -1267,15 +1250,8 @@
at86rf230_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
{
struct at86rf230_local *lp = hw->priv;
- int rc = 0;
- lp->tx_aret = retries >= 0;
- lp->max_frame_retries = retries;
-
- if (retries >= 0)
- rc = at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
-
- return rc;
+ return at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
}
static int
diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
index 613dae5..c5b54a1 100644
--- a/drivers/net/ieee802154/cc2520.c
+++ b/drivers/net/ieee802154/cc2520.c
@@ -833,6 +833,7 @@
if (!spi_pdata)
return -ENOENT;
*pdata = *spi_pdata;
+ priv->fifo_pin = pdata->fifo;
return 0;
}
diff --git a/include/net/6lowpan.h b/include/net/6lowpan.h
index dc03d77..a2f59ec 100644
--- a/include/net/6lowpan.h
+++ b/include/net/6lowpan.h
@@ -197,6 +197,27 @@
#define LOWPAN_NHC_UDP_CS_P_11 0xF3 /* source & dest = 0xF0B + 4bit inline */
#define LOWPAN_NHC_UDP_CS_C 0x04 /* checksum elided */
+#define LOWPAN_PRIV_SIZE(llpriv_size) \
+ (sizeof(struct lowpan_priv) + llpriv_size)
+
+enum lowpan_lltypes {
+ LOWPAN_LLTYPE_BTLE,
+ LOWPAN_LLTYPE_IEEE802154,
+};
+
+struct lowpan_priv {
+ enum lowpan_lltypes lltype;
+
+ /* must be last */
+ u8 priv[0] __aligned(sizeof(void *));
+};
+
+static inline
+struct lowpan_priv *lowpan_priv(const struct net_device *dev)
+{
+ return netdev_priv(dev);
+}
+
#ifdef DEBUG
/* print data in line */
static inline void raw_dump_inline(const char *caller, char *msg,
@@ -372,6 +393,8 @@
return skb->len + uncomp_header - ret;
}
+void lowpan_netdev_setup(struct net_device *dev, enum lowpan_lltypes lltype);
+
int
lowpan_header_decompress(struct sk_buff *skb, struct net_device *dev,
const u8 *saddr, const u8 saddr_type,
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 2a6b091..9e1a59e 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -512,9 +512,11 @@
HCI_AUTO_CONN_DIRECT,
HCI_AUTO_CONN_ALWAYS,
HCI_AUTO_CONN_LINK_LOSS,
+ HCI_AUTO_CONN_EXPLICIT,
} auto_connect;
struct hci_conn *conn;
+ bool explicit_connect;
};
extern struct list_head hci_dev_list;
@@ -639,6 +641,7 @@
HCI_CONN_DROP,
HCI_CONN_PARAM_REMOVAL_PEND,
HCI_CONN_NEW_LINK_KEY,
+ HCI_CONN_SCANNING,
};
static inline bool hci_conn_ssp_enabled(struct hci_conn *conn)
@@ -808,6 +811,26 @@
return NULL;
}
+static inline struct hci_conn *hci_lookup_le_connect(struct hci_dev *hdev)
+{
+ struct hci_conn_hash *h = &hdev->conn_hash;
+ struct hci_conn *c;
+
+ rcu_read_lock();
+
+ list_for_each_entry_rcu(c, &h->list, list) {
+ if (c->type == LE_LINK && c->state == BT_CONNECT &&
+ !test_bit(HCI_CONN_SCANNING, &c->flags)) {
+ rcu_read_unlock();
+ return c;
+ }
+ }
+
+ rcu_read_unlock();
+
+ return NULL;
+}
+
int hci_disconnect(struct hci_conn *conn, __u8 reason);
bool hci_setup_sync(struct hci_conn *conn, __u16 handle);
void hci_sco_setup(struct hci_conn *conn, __u8 status);
@@ -823,6 +846,9 @@
void hci_chan_list_flush(struct hci_conn *conn);
struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle);
+struct hci_conn *hci_connect_le_scan(struct hci_dev *hdev, bdaddr_t *dst,
+ u8 dst_type, u8 sec_level,
+ u16 conn_timeout, u8 role);
struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
u8 dst_type, u8 sec_level, u16 conn_timeout,
u8 role);
@@ -988,6 +1014,9 @@
struct hci_conn_params *hci_pend_le_action_lookup(struct list_head *list,
bdaddr_t *addr,
u8 addr_type);
+struct hci_conn_params *hci_explicit_connect_lookup(struct hci_dev *hdev,
+ bdaddr_t *addr,
+ u8 addr_type);
void hci_uuids_clear(struct hci_dev *hdev);
diff --git a/include/net/cfg802154.h b/include/net/cfg802154.h
index 382f94b..76b1ffa 100644
--- a/include/net/cfg802154.h
+++ b/include/net/cfg802154.h
@@ -63,6 +63,8 @@
s8 max_frame_retries);
int (*set_lbt_mode)(struct wpan_phy *wpan_phy,
struct wpan_dev *wpan_dev, bool mode);
+ int (*set_ackreq_default)(struct wpan_phy *wpan_phy,
+ struct wpan_dev *wpan_dev, bool ackreq);
};
static inline bool
@@ -173,6 +175,9 @@
struct list_head list;
struct net_device *netdev;
+ /* lowpan interface, set when the wpan_dev belongs to one lowpan_dev */
+ struct net_device *lowpan_dev;
+
u32 identifier;
/* MAC PIB */
@@ -193,6 +198,9 @@
bool lbt;
bool promiscuous_mode;
+
+ /* fallback for acknowledgment bit setting */
+ bool ackreq;
};
#define to_phy(_dev) container_of(_dev, struct wpan_phy, dev)
diff --git a/include/net/nl802154.h b/include/net/nl802154.h
index b0ab530..cf2713d 100644
--- a/include/net/nl802154.h
+++ b/include/net/nl802154.h
@@ -52,6 +52,8 @@
NL802154_CMD_SET_LBT_MODE,
+ NL802154_CMD_SET_ACKREQ_DEFAULT,
+
/* add new commands above here */
/* used to define NL802154_CMD_MAX below */
@@ -104,6 +106,8 @@
NL802154_ATTR_SUPPORTED_COMMANDS,
+ NL802154_ATTR_ACKREQ_DEFAULT,
+
/* add attributes here, update the policy in nl802154.c */
__NL802154_ATTR_AFTER_LAST,
diff --git a/net/6lowpan/Makefile b/net/6lowpan/Makefile
index eb8baa7..c6ffc55 100644
--- a/net/6lowpan/Makefile
+++ b/net/6lowpan/Makefile
@@ -1,6 +1,6 @@
obj-$(CONFIG_6LOWPAN) += 6lowpan.o
-6lowpan-y := iphc.o nhc.o
+6lowpan-y := core.o iphc.o nhc.o
#rfc6282 nhcs
obj-$(CONFIG_6LOWPAN_NHC_DEST) += nhc_dest.o
diff --git a/net/6lowpan/core.c b/net/6lowpan/core.c
new file mode 100644
index 0000000..ae1896f
--- /dev/null
+++ b/net/6lowpan/core.c
@@ -0,0 +1,40 @@
+/* This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Authors:
+ * (C) 2015 Pengutronix, Alexander Aring <aar@pengutronix.de>
+ */
+
+#include <linux/module.h>
+
+#include <net/6lowpan.h>
+
+void lowpan_netdev_setup(struct net_device *dev, enum lowpan_lltypes lltype)
+{
+ lowpan_priv(dev)->lltype = lltype;
+}
+EXPORT_SYMBOL(lowpan_netdev_setup);
+
+static int __init lowpan_module_init(void)
+{
+ request_module_nowait("ipv6");
+
+ request_module_nowait("nhc_dest");
+ request_module_nowait("nhc_fragment");
+ request_module_nowait("nhc_hop");
+ request_module_nowait("nhc_ipv6");
+ request_module_nowait("nhc_mobility");
+ request_module_nowait("nhc_routing");
+ request_module_nowait("nhc_udp");
+
+ return 0;
+}
+module_init(lowpan_module_init);
+
+MODULE_LICENSE("GPL");
diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
index 9055d7b..1e0071f 100644
--- a/net/6lowpan/iphc.c
+++ b/net/6lowpan/iphc.c
@@ -48,7 +48,6 @@
#include <linux/bitops.h>
#include <linux/if_arp.h>
-#include <linux/module.h>
#include <linux/netdevice.h>
#include <net/6lowpan.h>
#include <net/ipv6.h>
@@ -284,7 +283,7 @@
if (lowpan_fetch_skb(skb, &tmp, sizeof(tmp)))
return -EINVAL;
- hdr.flow_lbl[0] = (skb->data[0] & 0x0F) | ((tmp >> 2) & 0x30);
+ hdr.flow_lbl[0] = (tmp & 0x0F) | ((tmp >> 2) & 0x30);
memcpy(&hdr.flow_lbl[1], &skb->data[0], 2);
skb_pull(skb, 2);
break;
@@ -610,21 +609,3 @@
return 0;
}
EXPORT_SYMBOL_GPL(lowpan_header_compress);
-
-static int __init lowpan_module_init(void)
-{
- request_module_nowait("ipv6");
-
- request_module_nowait("nhc_dest");
- request_module_nowait("nhc_fragment");
- request_module_nowait("nhc_hop");
- request_module_nowait("nhc_ipv6");
- request_module_nowait("nhc_mobility");
- request_module_nowait("nhc_routing");
- request_module_nowait("nhc_udp");
-
- return 0;
-}
-module_init(lowpan_module_init);
-
-MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index 0ffe2e2..131e79c 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -85,7 +85,7 @@
static inline struct lowpan_dev *lowpan_dev(const struct net_device *netdev)
{
- return netdev_priv(netdev);
+ return (struct lowpan_dev *)lowpan_priv(netdev)->priv;
}
static inline void peer_add(struct lowpan_dev *dev, struct lowpan_peer *peer)
@@ -848,8 +848,9 @@
struct net_device *netdev;
int err = 0;
- netdev = alloc_netdev(sizeof(struct lowpan_dev), IFACE_NAME_TEMPLATE,
- NET_NAME_UNKNOWN, netdev_setup);
+ netdev = alloc_netdev(LOWPAN_PRIV_SIZE(sizeof(struct lowpan_dev)),
+ IFACE_NAME_TEMPLATE, NET_NAME_UNKNOWN,
+ netdev_setup);
if (!netdev)
return -ENOMEM;
@@ -859,7 +860,7 @@
SET_NETDEV_DEV(netdev, &chan->conn->hcon->hdev->dev);
SET_NETDEV_DEVTYPE(netdev, &bt_type);
- *dev = netdev_priv(netdev);
+ *dev = lowpan_dev(netdev);
(*dev)->netdev = netdev;
(*dev)->hdev = chan->conn->hcon->hdev;
INIT_LIST_HEAD(&(*dev)->peers);
@@ -869,6 +870,8 @@
list_add_rcu(&(*dev)->list, &bt_6lowpan_devices);
spin_unlock(&devices_lock);
+ lowpan_netdev_setup(netdev, LOWPAN_LLTYPE_BTLE);
+
err = register_netdev(netdev);
if (err < 0) {
BT_INFO("register_netdev failed %d", err);
diff --git a/net/bluetooth/amp.c b/net/bluetooth/amp.c
index 238ddd3..e32f341 100644
--- a/net/bluetooth/amp.c
+++ b/net/bluetooth/amp.c
@@ -379,7 +379,7 @@
amp_ctrl_put(ctrl);
hci_req_init(&req, hdev);
- hci_req_add(&req, HCI_OP_WRITE_REMOTE_AMP_ASSOC, sizeof(cp), &cp);
+ hci_req_add(&req, HCI_OP_WRITE_REMOTE_AMP_ASSOC, len, cp);
hci_req_run_skb(&req, write_remote_amp_assoc_complete);
kfree(cp);
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 2c48bf0..b4548c73 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -64,6 +64,48 @@
hci_send_cmd(conn->hdev, HCI_OP_LE_CREATE_CONN_CANCEL, 0, NULL);
}
+/* This function requires the caller holds hdev->lock */
+static void hci_connect_le_scan_cleanup(struct hci_conn *conn)
+{
+ struct hci_conn_params *params;
+ struct smp_irk *irk;
+ bdaddr_t *bdaddr;
+ u8 bdaddr_type;
+
+ bdaddr = &conn->dst;
+ bdaddr_type = conn->dst_type;
+
+ /* Check if we need to convert to identity address */
+ irk = hci_get_irk(conn->hdev, bdaddr, bdaddr_type);
+ if (irk) {
+ bdaddr = &irk->bdaddr;
+ bdaddr_type = irk->addr_type;
+ }
+
+ params = hci_explicit_connect_lookup(conn->hdev, bdaddr, bdaddr_type);
+ if (!params)
+ return;
+
+ /* The connection attempt was doing scan for new RPA, and is
+ * in scan phase. If params are not associated with any other
+ * autoconnect action, remove them completely. If they are, just unmark
+ * them as waiting for connection, by clearing explicit_connect field.
+ */
+ if (params->auto_connect == HCI_AUTO_CONN_EXPLICIT)
+ hci_conn_params_del(conn->hdev, bdaddr, bdaddr_type);
+ else
+ params->explicit_connect = false;
+}
+
+/* This function requires the caller holds hdev->lock */
+static void hci_connect_le_scan_remove(struct hci_conn *conn)
+{
+ hci_connect_le_scan_cleanup(conn);
+
+ hci_conn_hash_del(conn->hdev, conn);
+ hci_update_background_scan(conn->hdev);
+}
+
static void hci_acl_create_connection(struct hci_conn *conn)
{
struct hci_dev *hdev = conn->hdev;
@@ -340,8 +382,12 @@
if (conn->out) {
if (conn->type == ACL_LINK)
hci_acl_create_connection_cancel(conn);
- else if (conn->type == LE_LINK)
- hci_le_create_connection_cancel(conn);
+ else if (conn->type == LE_LINK) {
+ if (test_bit(HCI_CONN_SCANNING, &conn->flags))
+ hci_connect_le_scan_remove(conn);
+ else
+ hci_le_create_connection_cancel(conn);
+ }
} else if (conn->type == SCO_LINK || conn->type == ESCO_LINK) {
hci_reject_sco(conn);
}
@@ -637,15 +683,18 @@
{
struct hci_conn *conn;
- if (status == 0)
- return;
+ hci_dev_lock(hdev);
+
+ conn = hci_lookup_le_connect(hdev);
+
+ if (!status) {
+ hci_connect_le_scan_cleanup(conn);
+ goto done;
+ }
BT_ERR("HCI request failed to create LE connection: status 0x%2.2x",
status);
- hci_dev_lock(hdev);
-
- conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
if (!conn)
goto done;
@@ -685,6 +734,7 @@
hci_req_add(req, HCI_OP_LE_CREATE_CONN, sizeof(cp), &cp);
conn->state = BT_CONNECT;
+ clear_bit(HCI_CONN_SCANNING, &conn->flags);
}
static void hci_req_directed_advertising(struct hci_request *req,
@@ -728,7 +778,7 @@
u8 role)
{
struct hci_conn_params *params;
- struct hci_conn *conn;
+ struct hci_conn *conn, *conn_unfinished;
struct smp_irk *irk;
struct hci_request req;
int err;
@@ -751,26 +801,29 @@
* and return the object found.
*/
conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, dst);
+ conn_unfinished = NULL;
if (conn) {
- conn->pending_sec_level = sec_level;
- goto done;
+ if (conn->state == BT_CONNECT &&
+ test_bit(HCI_CONN_SCANNING, &conn->flags)) {
+ BT_DBG("will continue unfinished conn %pMR", dst);
+ conn_unfinished = conn;
+ } else {
+ if (conn->pending_sec_level < sec_level)
+ conn->pending_sec_level = sec_level;
+ goto done;
+ }
}
/* Since the controller supports only one LE connection attempt at a
* time, we return -EBUSY if there is any connection attempt running.
*/
- conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
- if (conn)
+ if (hci_lookup_le_connect(hdev))
return ERR_PTR(-EBUSY);
/* When given an identity address with existing identity
* resolving key, the connection needs to be established
* to a resolvable random address.
*
- * This uses the cached random resolvable address from
- * a previous scan. When no cached address is available,
- * try connecting to the identity address instead.
- *
* Storing the resolvable random address is required here
* to handle connection failures. The address will later
* be resolved back into the original identity address
@@ -782,15 +835,23 @@
dst_type = ADDR_LE_DEV_RANDOM;
}
- conn = hci_conn_add(hdev, LE_LINK, dst, role);
+ if (conn_unfinished) {
+ conn = conn_unfinished;
+ bacpy(&conn->dst, dst);
+ } else {
+ conn = hci_conn_add(hdev, LE_LINK, dst, role);
+ }
+
if (!conn)
return ERR_PTR(-ENOMEM);
conn->dst_type = dst_type;
conn->sec_level = BT_SECURITY_LOW;
- conn->pending_sec_level = sec_level;
conn->conn_timeout = conn_timeout;
+ if (!conn_unfinished)
+ conn->pending_sec_level = sec_level;
+
hci_req_init(&req, hdev);
/* Disable advertising if we're active. For master role
@@ -855,6 +916,144 @@
}
done:
+ /* If this is continuation of connect started by hci_connect_le_scan,
+ * it already called hci_conn_hold and calling it again would mess the
+ * counter.
+ */
+ if (!conn_unfinished)
+ hci_conn_hold(conn);
+
+ return conn;
+}
+
+static void hci_connect_le_scan_complete(struct hci_dev *hdev, u8 status,
+ u16 opcode)
+{
+ struct hci_conn *conn;
+
+ if (!status)
+ return;
+
+ BT_ERR("Failed to add device to auto conn whitelist: status 0x%2.2x",
+ status);
+
+ hci_dev_lock(hdev);
+
+ conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
+ if (conn)
+ hci_le_conn_failed(conn, status);
+
+ hci_dev_unlock(hdev);
+}
+
+static bool is_connected(struct hci_dev *hdev, bdaddr_t *addr, u8 type)
+{
+ struct hci_conn *conn;
+
+ conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, addr);
+ if (!conn)
+ return false;
+
+ if (conn->dst_type != type)
+ return false;
+
+ if (conn->state != BT_CONNECTED)
+ return false;
+
+ return true;
+}
+
+/* This function requires the caller holds hdev->lock */
+static int hci_explicit_conn_params_set(struct hci_request *req,
+ bdaddr_t *addr, u8 addr_type)
+{
+ struct hci_dev *hdev = req->hdev;
+ struct hci_conn_params *params;
+
+ if (is_connected(hdev, addr, addr_type))
+ return -EISCONN;
+
+ params = hci_conn_params_add(hdev, addr, addr_type);
+ if (!params)
+ return -EIO;
+
+ /* If we created new params, or existing params were marked as disabled,
+ * mark them to be used just once to connect.
+ */
+ if (params->auto_connect == HCI_AUTO_CONN_DISABLED) {
+ params->auto_connect = HCI_AUTO_CONN_EXPLICIT;
+ list_del_init(¶ms->action);
+ list_add(¶ms->action, &hdev->pend_le_conns);
+ }
+
+ params->explicit_connect = true;
+ __hci_update_background_scan(req);
+
+ BT_DBG("addr %pMR (type %u) auto_connect %u", addr, addr_type,
+ params->auto_connect);
+
+ return 0;
+}
+
+/* This function requires the caller holds hdev->lock */
+struct hci_conn *hci_connect_le_scan(struct hci_dev *hdev, bdaddr_t *dst,
+ u8 dst_type, u8 sec_level,
+ u16 conn_timeout, u8 role)
+{
+ struct hci_conn *conn;
+ struct hci_request req;
+ int err;
+
+ /* Let's make sure that le is enabled.*/
+ if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
+ if (lmp_le_capable(hdev))
+ return ERR_PTR(-ECONNREFUSED);
+
+ return ERR_PTR(-EOPNOTSUPP);
+ }
+
+ /* Some devices send ATT messages as soon as the physical link is
+ * established. To be able to handle these ATT messages, the user-
+ * space first establishes the connection and then starts the pairing
+ * process.
+ *
+ * So if a hci_conn object already exists for the following connection
+ * attempt, we simply update pending_sec_level and auth_type fields
+ * and return the object found.
+ */
+ conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, dst);
+ if (conn) {
+ if (conn->pending_sec_level < sec_level)
+ conn->pending_sec_level = sec_level;
+ goto done;
+ }
+
+ BT_DBG("requesting refresh of dst_addr");
+
+ conn = hci_conn_add(hdev, LE_LINK, dst, role);
+ if (!conn)
+ return ERR_PTR(-ENOMEM);
+
+ hci_req_init(&req, hdev);
+
+ if (hci_explicit_conn_params_set(&req, dst, dst_type) < 0)
+ return ERR_PTR(-EBUSY);
+
+ conn->state = BT_CONNECT;
+ set_bit(HCI_CONN_SCANNING, &conn->flags);
+
+ err = hci_req_run(&req, hci_connect_le_scan_complete);
+ if (err && err != -ENODATA) {
+ hci_conn_del(conn);
+ return ERR_PTR(err);
+ }
+
+ conn->dst_type = dst_type;
+ conn->sec_level = BT_SECURITY_LOW;
+ conn->pending_sec_level = sec_level;
+ conn->conn_timeout = conn_timeout;
+
+done:
hci_conn_hold(conn);
return conn;
}
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index bc43b64..adcbc74 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -2848,6 +2848,30 @@
}
/* This function requires the caller holds hdev->lock */
+struct hci_conn_params *hci_explicit_connect_lookup(struct hci_dev *hdev,
+ bdaddr_t *addr,
+ u8 addr_type)
+{
+ struct hci_conn_params *param;
+
+ list_for_each_entry(param, &hdev->pend_le_conns, action) {
+ if (bacmp(¶m->addr, addr) == 0 &&
+ param->addr_type == addr_type &&
+ param->explicit_connect)
+ return param;
+ }
+
+ list_for_each_entry(param, &hdev->pend_le_reports, action) {
+ if (bacmp(¶m->addr, addr) == 0 &&
+ param->addr_type == addr_type &&
+ param->explicit_connect)
+ return param;
+ }
+
+ return NULL;
+}
+
+/* This function requires the caller holds hdev->lock */
struct hci_conn_params *hci_conn_params_add(struct hci_dev *hdev,
bdaddr_t *addr, u8 addr_type)
{
@@ -2916,6 +2940,15 @@
list_for_each_entry_safe(params, tmp, &hdev->le_conn_params, list) {
if (params->auto_connect != HCI_AUTO_CONN_DISABLED)
continue;
+
+ /* If trying to estabilish one time connection to disabled
+ * device, leave the params, but mark them as just once.
+ */
+ if (params->explicit_connect) {
+ params->auto_connect = HCI_AUTO_CONN_EXPLICIT;
+ continue;
+ }
+
list_del(¶ms->list);
kfree(params);
}
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 218d7df..7ba35a9 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1059,7 +1059,7 @@
hci_dev_set_flag(hdev, HCI_LE_ADV);
- conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
+ conn = hci_lookup_le_connect(hdev);
if (conn)
queue_delayed_work(hdev->workqueue,
&conn->le_conn_timeout,
@@ -4447,7 +4447,7 @@
*/
hci_dev_clear_flag(hdev, HCI_LE_ADV);
- conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
+ conn = hci_lookup_le_connect(hdev);
if (!conn) {
conn = hci_conn_add(hdev, LE_LINK, &ev->bdaddr, ev->role);
if (!conn) {
@@ -4640,42 +4640,49 @@
/* If we're not connectable only connect devices that we have in
* our pend_le_conns list.
*/
- params = hci_pend_le_action_lookup(&hdev->pend_le_conns,
- addr, addr_type);
+ params = hci_explicit_connect_lookup(hdev, addr, addr_type);
+
if (!params)
return NULL;
- switch (params->auto_connect) {
- case HCI_AUTO_CONN_DIRECT:
- /* Only devices advertising with ADV_DIRECT_IND are
- * triggering a connection attempt. This is allowing
- * incoming connections from slave devices.
- */
- if (adv_type != LE_ADV_DIRECT_IND)
+ if (!params->explicit_connect) {
+ switch (params->auto_connect) {
+ case HCI_AUTO_CONN_DIRECT:
+ /* Only devices advertising with ADV_DIRECT_IND are
+ * triggering a connection attempt. This is allowing
+ * incoming connections from slave devices.
+ */
+ if (adv_type != LE_ADV_DIRECT_IND)
+ return NULL;
+ break;
+ case HCI_AUTO_CONN_ALWAYS:
+ /* Devices advertising with ADV_IND or ADV_DIRECT_IND
+ * are triggering a connection attempt. This means
+ * that incoming connectioms from slave device are
+ * accepted and also outgoing connections to slave
+ * devices are established when found.
+ */
+ break;
+ default:
return NULL;
- break;
- case HCI_AUTO_CONN_ALWAYS:
- /* Devices advertising with ADV_IND or ADV_DIRECT_IND
- * are triggering a connection attempt. This means
- * that incoming connectioms from slave device are
- * accepted and also outgoing connections to slave
- * devices are established when found.
- */
- break;
- default:
- return NULL;
+ }
}
conn = hci_connect_le(hdev, addr, addr_type, BT_SECURITY_LOW,
HCI_LE_AUTOCONN_TIMEOUT, HCI_ROLE_MASTER);
if (!IS_ERR(conn)) {
- /* Store the pointer since we don't really have any
+ /* If HCI_AUTO_CONN_EXPLICIT is set, conn is already owned
+ * by higher layer that tried to connect, if no then
+ * store the pointer since we don't really have any
* other owner of the object besides the params that
* triggered it. This way we can abort the connection if
* the parameters get removed and keep the reference
* count consistent once the connection is established.
*/
- params->conn = hci_conn_get(conn);
+
+ if (!params->explicit_connect)
+ params->conn = hci_conn_get(conn);
+
return conn;
}
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index d6025d6..b736922 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -317,7 +317,7 @@
* address be updated at the next cycle.
*/
if (hci_dev_test_flag(hdev, HCI_LE_ADV) ||
- hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT)) {
+ hci_lookup_le_connect(hdev)) {
BT_DBG("Deferring random address update");
hci_dev_set_flag(hdev, HCI_RPA_EXPIRED);
return;
@@ -479,7 +479,6 @@
void __hci_update_background_scan(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
- struct hci_conn *conn;
if (!test_bit(HCI_UP, &hdev->flags) ||
test_bit(HCI_INIT, &hdev->flags) ||
@@ -529,8 +528,7 @@
* since some controllers are not able to scan and connect at
* the same time.
*/
- conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
- if (conn)
+ if (hci_lookup_le_connect(hdev))
return;
/* If controller is currently scanning, we stop it to ensure we
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 45fffa4..7c65ee2 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -7113,8 +7113,10 @@
else
role = HCI_ROLE_MASTER;
- hcon = hci_connect_le(hdev, dst, dst_type, chan->sec_level,
- HCI_LE_CONN_TIMEOUT, role);
+ hcon = hci_connect_le_scan(hdev, dst, dst_type,
+ chan->sec_level,
+ HCI_LE_CONN_TIMEOUT,
+ role);
} else {
u8 auth_type = l2cap_get_auth_type(chan);
hcon = hci_connect_acl(hdev, dst, chan->sec_level, auth_type);
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index e435438..ccaf5a4 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -3564,9 +3564,10 @@
*/
hci_conn_params_add(hdev, &cp->addr.bdaddr, addr_type);
- conn = hci_connect_le(hdev, &cp->addr.bdaddr, addr_type,
- sec_level, HCI_LE_CONN_TIMEOUT,
- HCI_ROLE_MASTER);
+ conn = hci_connect_le_scan(hdev, &cp->addr.bdaddr,
+ addr_type, sec_level,
+ HCI_LE_CONN_TIMEOUT,
+ HCI_ROLE_MASTER);
}
if (IS_ERR(conn)) {
@@ -4210,7 +4211,7 @@
/* Don't let discovery abort an outgoing connection attempt
* that's using directed advertising.
*/
- if (hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT)) {
+ if (hci_lookup_le_connect(hdev)) {
*status = MGMT_STATUS_REJECTED;
return false;
}
@@ -6107,6 +6108,12 @@
switch (auto_connect) {
case HCI_AUTO_CONN_DISABLED:
case HCI_AUTO_CONN_LINK_LOSS:
+ /* If auto connect is being disabled when we're trying to
+ * connect to device, keep connecting.
+ */
+ if (params->explicit_connect)
+ list_add(¶ms->action, &hdev->pend_le_conns);
+
__hci_update_background_scan(req);
break;
case HCI_AUTO_CONN_REPORT:
diff --git a/net/ieee802154/6lowpan/6lowpan_i.h b/net/ieee802154/6lowpan/6lowpan_i.h
index e50f69d..ea339fa9 100644
--- a/net/ieee802154/6lowpan/6lowpan_i.h
+++ b/net/ieee802154/6lowpan/6lowpan_i.h
@@ -5,6 +5,7 @@
#include <net/ieee802154_netdev.h>
#include <net/inet_frag.h>
+#include <net/6lowpan.h>
struct lowpan_create_arg {
u16 tag;
@@ -37,26 +38,18 @@
}
}
-struct lowpan_dev_record {
- struct net_device *ldev;
- struct list_head list;
-};
-
/* private device info */
struct lowpan_dev_info {
struct net_device *real_dev; /* real WPAN device ptr */
- struct mutex dev_list_mtx; /* mutex for list ops */
u16 fragment_tag;
};
static inline struct
lowpan_dev_info *lowpan_dev_info(const struct net_device *dev)
{
- return netdev_priv(dev);
+ return (struct lowpan_dev_info *)lowpan_priv(dev)->priv;
}
-extern struct list_head lowpan_devices;
-
int lowpan_frag_rcv(struct sk_buff *skb, const u8 frag_type);
void lowpan_net_frag_exit(void);
int lowpan_net_frag_init(void);
diff --git a/net/ieee802154/6lowpan/core.c b/net/ieee802154/6lowpan/core.c
index f20a387..27c25ad 100644
--- a/net/ieee802154/6lowpan/core.c
+++ b/net/ieee802154/6lowpan/core.c
@@ -52,8 +52,7 @@
#include "6lowpan_i.h"
-LIST_HEAD(lowpan_devices);
-static int lowpan_open_count;
+static int open_count;
static struct header_ops lowpan_header_ops = {
.create = lowpan_header_create,
@@ -114,7 +113,6 @@
struct nlattr *tb[], struct nlattr *data[])
{
struct net_device *real_dev;
- struct lowpan_dev_record *entry;
int ret;
ASSERT_RTNL();
@@ -133,67 +131,52 @@
return -EINVAL;
}
- lowpan_dev_info(dev)->real_dev = real_dev;
- mutex_init(&lowpan_dev_info(dev)->dev_list_mtx);
-
- entry = kzalloc(sizeof(*entry), GFP_KERNEL);
- if (!entry) {
+ if (real_dev->ieee802154_ptr->lowpan_dev) {
dev_put(real_dev);
- lowpan_dev_info(dev)->real_dev = NULL;
- return -ENOMEM;
+ return -EBUSY;
}
- entry->ldev = dev;
-
+ lowpan_dev_info(dev)->real_dev = real_dev;
/* Set the lowpan hardware address to the wpan hardware address. */
memcpy(dev->dev_addr, real_dev->dev_addr, IEEE802154_ADDR_LEN);
- mutex_lock(&lowpan_dev_info(dev)->dev_list_mtx);
- INIT_LIST_HEAD(&entry->list);
- list_add_tail(&entry->list, &lowpan_devices);
- mutex_unlock(&lowpan_dev_info(dev)->dev_list_mtx);
+ lowpan_netdev_setup(dev, LOWPAN_LLTYPE_IEEE802154);
ret = register_netdevice(dev);
- if (ret >= 0) {
- if (!lowpan_open_count)
- lowpan_rx_init();
- lowpan_open_count++;
+ if (ret < 0) {
+ dev_put(real_dev);
+ return ret;
}
- return ret;
+ real_dev->ieee802154_ptr->lowpan_dev = dev;
+ if (!open_count)
+ lowpan_rx_init();
+
+ open_count++;
+
+ return 0;
}
static void lowpan_dellink(struct net_device *dev, struct list_head *head)
{
struct lowpan_dev_info *lowpan_dev = lowpan_dev_info(dev);
struct net_device *real_dev = lowpan_dev->real_dev;
- struct lowpan_dev_record *entry, *tmp;
ASSERT_RTNL();
- lowpan_open_count--;
- if (!lowpan_open_count)
+ open_count--;
+
+ if (!open_count)
lowpan_rx_exit();
- mutex_lock(&lowpan_dev_info(dev)->dev_list_mtx);
- list_for_each_entry_safe(entry, tmp, &lowpan_devices, list) {
- if (entry->ldev == dev) {
- list_del(&entry->list);
- kfree(entry);
- }
- }
- mutex_unlock(&lowpan_dev_info(dev)->dev_list_mtx);
-
- mutex_destroy(&lowpan_dev_info(dev)->dev_list_mtx);
-
- unregister_netdevice_queue(dev, head);
-
+ real_dev->ieee802154_ptr->lowpan_dev = NULL;
+ unregister_netdevice(dev);
dev_put(real_dev);
}
static struct rtnl_link_ops lowpan_link_ops __read_mostly = {
.kind = "lowpan",
- .priv_size = sizeof(struct lowpan_dev_info),
+ .priv_size = LOWPAN_PRIV_SIZE(sizeof(struct lowpan_dev_info)),
.setup = lowpan_setup,
.newlink = lowpan_newlink,
.dellink = lowpan_dellink,
@@ -214,19 +197,21 @@
unsigned long event, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
- LIST_HEAD(del_list);
- struct lowpan_dev_record *entry, *tmp;
if (dev->type != ARPHRD_IEEE802154)
goto out;
- if (event == NETDEV_UNREGISTER) {
- list_for_each_entry_safe(entry, tmp, &lowpan_devices, list) {
- if (lowpan_dev_info(entry->ldev)->real_dev == dev)
- lowpan_dellink(entry->ldev, &del_list);
- }
-
- unregister_netdevice_many(&del_list);
+ switch (event) {
+ case NETDEV_UNREGISTER:
+ /* Check if wpan interface is unregistered that we
+ * also delete possible lowpan interfaces which belongs
+ * to the wpan interface.
+ */
+ if (dev->ieee802154_ptr && dev->ieee802154_ptr->lowpan_dev)
+ lowpan_dellink(dev->ieee802154_ptr->lowpan_dev, NULL);
+ break;
+ default:
+ break;
}
out:
diff --git a/net/ieee802154/6lowpan/rx.c b/net/ieee802154/6lowpan/rx.c
index 4be1d28..12e1020 100644
--- a/net/ieee802154/6lowpan/rx.c
+++ b/net/ieee802154/6lowpan/rx.c
@@ -15,36 +15,14 @@
#include "6lowpan_i.h"
-static int lowpan_give_skb_to_devices(struct sk_buff *skb,
- struct net_device *dev)
+static int lowpan_give_skb_to_device(struct sk_buff *skb,
+ struct net_device *dev)
{
- struct lowpan_dev_record *entry;
- struct sk_buff *skb_cp;
- int stat = NET_RX_SUCCESS;
-
+ skb->dev = dev->ieee802154_ptr->lowpan_dev;
skb->protocol = htons(ETH_P_IPV6);
skb->pkt_type = PACKET_HOST;
- rcu_read_lock();
- list_for_each_entry_rcu(entry, &lowpan_devices, list)
- if (lowpan_dev_info(entry->ldev)->real_dev == skb->dev) {
- skb_cp = skb_copy(skb, GFP_ATOMIC);
- if (!skb_cp) {
- kfree_skb(skb);
- rcu_read_unlock();
- return NET_RX_DROP;
- }
-
- skb_cp->dev = entry->ldev;
- stat = netif_rx(skb_cp);
- if (stat == NET_RX_DROP)
- break;
- }
- rcu_read_unlock();
-
- consume_skb(skb);
-
- return stat;
+ return netif_rx(skb);
}
static int
@@ -89,6 +67,10 @@
struct ieee802154_hdr hdr;
int ret;
+ if (dev->type != ARPHRD_IEEE802154 ||
+ !dev->ieee802154_ptr->lowpan_dev)
+ goto drop;
+
skb = skb_share_check(skb, GFP_ATOMIC);
if (!skb)
goto drop;
@@ -99,9 +81,6 @@
if (skb->pkt_type == PACKET_OTHERHOST)
goto drop_skb;
- if (dev->type != ARPHRD_IEEE802154)
- goto drop_skb;
-
if (ieee802154_hdr_peek_addrs(skb, &hdr) < 0)
goto drop_skb;
@@ -109,7 +88,7 @@
if (skb->data[0] == LOWPAN_DISPATCH_IPV6) {
/* Pull off the 1-byte of 6lowpan header. */
skb_pull(skb, 1);
- return lowpan_give_skb_to_devices(skb, NULL);
+ return lowpan_give_skb_to_device(skb, dev);
} else {
switch (skb->data[0] & 0xe0) {
case LOWPAN_DISPATCH_IPHC: /* ipv6 datagram */
@@ -117,7 +96,7 @@
if (ret < 0)
goto drop_skb;
- return lowpan_give_skb_to_devices(skb, NULL);
+ return lowpan_give_skb_to_device(skb, dev);
case LOWPAN_DISPATCH_FRAG1: /* first fragment header */
ret = lowpan_frag_rcv(skb, LOWPAN_DISPATCH_FRAG1);
if (ret == 1) {
@@ -125,7 +104,7 @@
if (ret < 0)
goto drop_skb;
- return lowpan_give_skb_to_devices(skb, NULL);
+ return lowpan_give_skb_to_device(skb, dev);
} else if (ret == -1) {
return NET_RX_DROP;
} else {
@@ -138,7 +117,7 @@
if (ret < 0)
goto drop_skb;
- return lowpan_give_skb_to_devices(skb, NULL);
+ return lowpan_give_skb_to_device(skb, dev);
} else if (ret == -1) {
return NET_RX_DROP;
} else {
diff --git a/net/ieee802154/6lowpan/tx.c b/net/ieee802154/6lowpan/tx.c
index 2597abb..f6263fc 100644
--- a/net/ieee802154/6lowpan/tx.c
+++ b/net/ieee802154/6lowpan/tx.c
@@ -112,7 +112,7 @@
frag = lowpan_alloc_frag(skb, frag_hdrlen + len, wpan_hdr);
if (IS_ERR(frag))
- return -PTR_ERR(frag);
+ return PTR_ERR(frag);
memcpy(skb_put(frag, frag_hdrlen), frag_hdr, frag_hdrlen);
memcpy(skb_put(frag, len), skb_network_header(skb) + offset, len);
@@ -224,7 +224,7 @@
} else {
da.mode = IEEE802154_ADDR_LONG;
da.extended_addr = ieee802154_devaddr_from_raw(daddr);
- cb->ackreq = wpan_dev->frame_retries >= 0;
+ cb->ackreq = wpan_dev->ackreq;
}
return dev_hard_header(skb, lowpan_dev_info(dev)->real_dev,
diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index 68f2401..1b00a14 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -230,6 +230,8 @@
[NL802154_ATTR_WPAN_PHY_CAPS] = { .type = NLA_NESTED },
[NL802154_ATTR_SUPPORTED_COMMANDS] = { .type = NLA_NESTED },
+
+ [NL802154_ATTR_ACKREQ_DEFAULT] = { .type = NLA_U8 },
};
/* message building helper */
@@ -458,6 +460,7 @@
CMD(set_max_csma_backoffs, SET_MAX_CSMA_BACKOFFS);
CMD(set_max_frame_retries, SET_MAX_FRAME_RETRIES);
CMD(set_lbt_mode, SET_LBT_MODE);
+ CMD(set_ackreq_default, SET_ACKREQ_DEFAULT);
if (rdev->wpan_phy.flags & WPAN_PHY_FLAG_TXPOWER)
CMD(set_tx_power, SET_TX_POWER);
@@ -656,6 +659,10 @@
if (nla_put_u8(msg, NL802154_ATTR_LBT_MODE, wpan_dev->lbt))
goto nla_put_failure;
+ /* ackreq default behaviour */
+ if (nla_put_u8(msg, NL802154_ATTR_ACKREQ_DEFAULT, wpan_dev->ackreq))
+ goto nla_put_failure;
+
genlmsg_end(msg, hdr);
return 0;
@@ -1042,6 +1049,24 @@
return rdev_set_lbt_mode(rdev, wpan_dev, mode);
}
+static int
+nl802154_set_ackreq_default(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg802154_registered_device *rdev = info->user_ptr[0];
+ struct net_device *dev = info->user_ptr[1];
+ struct wpan_dev *wpan_dev = dev->ieee802154_ptr;
+ bool ackreq;
+
+ if (netif_running(dev))
+ return -EBUSY;
+
+ if (!info->attrs[NL802154_ATTR_ACKREQ_DEFAULT])
+ return -EINVAL;
+
+ ackreq = !!nla_get_u8(info->attrs[NL802154_ATTR_ACKREQ_DEFAULT]);
+ return rdev_set_ackreq_default(rdev, wpan_dev, ackreq);
+}
+
#define NL802154_FLAG_NEED_WPAN_PHY 0x01
#define NL802154_FLAG_NEED_NETDEV 0x02
#define NL802154_FLAG_NEED_RTNL 0x04
@@ -1248,6 +1273,14 @@
.internal_flags = NL802154_FLAG_NEED_NETDEV |
NL802154_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL802154_CMD_SET_ACKREQ_DEFAULT,
+ .doit = nl802154_set_ackreq_default,
+ .policy = nl802154_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL802154_FLAG_NEED_NETDEV |
+ NL802154_FLAG_NEED_RTNL,
+ },
};
/* initialisation/exit functions */
diff --git a/net/ieee802154/rdev-ops.h b/net/ieee802154/rdev-ops.h
index 8d5960a..03b3575 100644
--- a/net/ieee802154/rdev-ops.h
+++ b/net/ieee802154/rdev-ops.h
@@ -195,4 +195,17 @@
return ret;
}
+static inline int
+rdev_set_ackreq_default(struct cfg802154_registered_device *rdev,
+ struct wpan_dev *wpan_dev, bool ackreq)
+{
+ int ret;
+
+ trace_802154_rdev_set_ackreq_default(&rdev->wpan_phy, wpan_dev,
+ ackreq);
+ ret = rdev->ops->set_ackreq_default(&rdev->wpan_phy, wpan_dev, ackreq);
+ trace_802154_rdev_return_int(&rdev->wpan_phy, ret);
+ return ret;
+}
+
#endif /* __CFG802154_RDEV_OPS */
diff --git a/net/ieee802154/trace.h b/net/ieee802154/trace.h
index 4399b7f..9a471e41 100644
--- a/net/ieee802154/trace.h
+++ b/net/ieee802154/trace.h
@@ -275,6 +275,25 @@
WPAN_DEV_PR_ARG, BOOL_TO_STR(__entry->mode))
);
+TRACE_EVENT(802154_rdev_set_ackreq_default,
+ TP_PROTO(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev,
+ bool ackreq),
+ TP_ARGS(wpan_phy, wpan_dev, ackreq),
+ TP_STRUCT__entry(
+ WPAN_PHY_ENTRY
+ WPAN_DEV_ENTRY
+ __field(bool, ackreq)
+ ),
+ TP_fast_assign(
+ WPAN_PHY_ASSIGN;
+ WPAN_DEV_ASSIGN;
+ __entry->ackreq = ackreq;
+ ),
+ TP_printk(WPAN_PHY_PR_FMT ", " WPAN_DEV_PR_FMT
+ ", ackreq default: %s", WPAN_PHY_PR_ARG,
+ WPAN_DEV_PR_ARG, BOOL_TO_STR(__entry->ackreq))
+);
+
TRACE_EVENT(802154_rdev_return_int,
TP_PROTO(struct wpan_phy *wpan_phy, int ret),
TP_ARGS(wpan_phy, ret),
diff --git a/net/mac802154/cfg.c b/net/mac802154/cfg.c
index f7ba51e..c865ebb 100644
--- a/net/mac802154/cfg.c
+++ b/net/mac802154/cfg.c
@@ -209,10 +209,6 @@
{
ASSERT_RTNL();
- if (wpan_dev->min_be == min_be &&
- wpan_dev->max_be == max_be)
- return 0;
-
wpan_dev->min_be = min_be;
wpan_dev->max_be = max_be;
return 0;
@@ -224,9 +220,6 @@
{
ASSERT_RTNL();
- if (wpan_dev->short_addr == short_addr)
- return 0;
-
wpan_dev->short_addr = short_addr;
return 0;
}
@@ -238,9 +231,6 @@
{
ASSERT_RTNL();
- if (wpan_dev->csma_retries == max_csma_backoffs)
- return 0;
-
wpan_dev->csma_retries = max_csma_backoffs;
return 0;
}
@@ -252,9 +242,6 @@
{
ASSERT_RTNL();
- if (wpan_dev->frame_retries == max_frame_retries)
- return 0;
-
wpan_dev->frame_retries = max_frame_retries;
return 0;
}
@@ -265,13 +252,20 @@
{
ASSERT_RTNL();
- if (wpan_dev->lbt == mode)
- return 0;
-
wpan_dev->lbt = mode;
return 0;
}
+static int
+ieee802154_set_ackreq_default(struct wpan_phy *wpan_phy,
+ struct wpan_dev *wpan_dev, bool ackreq)
+{
+ ASSERT_RTNL();
+
+ wpan_dev->ackreq = ackreq;
+ return 0;
+}
+
const struct cfg802154_ops mac802154_config_ops = {
.add_virtual_intf_deprecated = ieee802154_add_iface_deprecated,
.del_virtual_intf_deprecated = ieee802154_del_iface_deprecated,
@@ -289,4 +283,5 @@
.set_max_csma_backoffs = ieee802154_set_max_csma_backoffs,
.set_max_frame_retries = ieee802154_set_max_frame_retries,
.set_lbt_mode = ieee802154_set_lbt_mode,
+ .set_ackreq_default = ieee802154_set_ackreq_default,
};
diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c
index 416de90..ed26952 100644
--- a/net/mac802154/iface.c
+++ b/net/mac802154/iface.c
@@ -125,6 +125,14 @@
if (netif_running(dev))
return -EBUSY;
+ /* lowpan need to be down for update
+ * SLAAC address after ifup
+ */
+ if (sdata->wpan_dev.lowpan_dev) {
+ if (netif_running(sdata->wpan_dev.lowpan_dev))
+ return -EBUSY;
+ }
+
ieee802154_be64_to_le64(&extended_addr, addr->sa_data);
if (!ieee802154_is_valid_extended_unicast_addr(extended_addr))
return -EINVAL;
@@ -132,6 +140,13 @@
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
sdata->wpan_dev.extended_addr = extended_addr;
+ /* update lowpan interface mac address when
+ * wpan mac has been changed
+ */
+ if (sdata->wpan_dev.lowpan_dev)
+ memcpy(sdata->wpan_dev.lowpan_dev->dev_addr, dev->dev_addr,
+ dev->addr_len);
+
return mac802154_wpan_update_llsec(dev);
}
@@ -483,8 +498,7 @@
wpan_dev->min_be = 3;
wpan_dev->max_be = 5;
wpan_dev->csma_retries = 4;
- /* for compatibility, actual default is 3 */
- wpan_dev->frame_retries = -1;
+ wpan_dev->frame_retries = 3;
wpan_dev->pan_id = cpu_to_le16(IEEE802154_PANID_BROADCAST);
wpan_dev->short_addr = cpu_to_le16(IEEE802154_ADDR_BROADCAST);
diff --git a/net/mac802154/main.c b/net/mac802154/main.c
index 9e55431..e8cab5b 100644
--- a/net/mac802154/main.c
+++ b/net/mac802154/main.c
@@ -111,7 +111,7 @@
phy->supported.max_minbe = 8;
phy->supported.min_maxbe = 3;
phy->supported.max_maxbe = 8;
- phy->supported.min_frame_retries = -1;
+ phy->supported.min_frame_retries = 0;
phy->supported.max_frame_retries = 7;
phy->supported.max_csma_backoffs = 5;
phy->supported.lbt = NL802154_SUPPORTED_BOOL_FALSE;
@@ -177,11 +177,8 @@
}
if (!(hw->flags & IEEE802154_HW_FRAME_RETRIES)) {
- /* TODO should be 3, but our default value is -1 which means
- * no ARET handling.
- */
- local->phy->supported.min_frame_retries = -1;
- local->phy->supported.max_frame_retries = -1;
+ local->phy->supported.min_frame_retries = 3;
+ local->phy->supported.max_frame_retries = 3;
}
if (hw->flags & IEEE802154_HW_PROMISCUOUS)
diff --git a/net/rfkill/rfkill-gpio.c b/net/rfkill/rfkill-gpio.c
index d5d58d9..9312722 100644
--- a/net/rfkill/rfkill-gpio.c
+++ b/net/rfkill/rfkill-gpio.c
@@ -164,7 +164,6 @@
#ifdef CONFIG_ACPI
static const struct acpi_device_id rfkill_acpi_match[] = {
{ "BCM2E1A", RFKILL_TYPE_BLUETOOTH },
- { "BCM2E39", RFKILL_TYPE_BLUETOOTH },
{ "BCM2E3D", RFKILL_TYPE_BLUETOOTH },
{ "BCM2E40", RFKILL_TYPE_BLUETOOTH },
{ "BCM2E64", RFKILL_TYPE_BLUETOOTH },