rtc: add alarm/update irq interfaces
Add standard interfaces for alarm/update irqs enabling. Drivers are no
more required to implement equivalent ioctl code as rtc-dev will provide
it.
UIE emulation should now be handled correctly and will work even for those
RTC drivers who cannot be configured to do both UIE and AIE.
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index ecdea44..45152f4 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -92,10 +92,10 @@
spin_unlock_irqrestore(&rtc->irq_lock, flags);
}
-static void clear_uie(struct rtc_device *rtc)
+static int clear_uie(struct rtc_device *rtc)
{
spin_lock_irq(&rtc->irq_lock);
- if (rtc->irq_active) {
+ if (rtc->uie_irq_active) {
rtc->stop_uie_polling = 1;
if (rtc->uie_timer_active) {
spin_unlock_irq(&rtc->irq_lock);
@@ -108,9 +108,10 @@
flush_scheduled_work();
spin_lock_irq(&rtc->irq_lock);
}
- rtc->irq_active = 0;
+ rtc->uie_irq_active = 0;
}
spin_unlock_irq(&rtc->irq_lock);
+ return 0;
}
static int set_uie(struct rtc_device *rtc)
@@ -122,8 +123,8 @@
if (err)
return err;
spin_lock_irq(&rtc->irq_lock);
- if (!rtc->irq_active) {
- rtc->irq_active = 1;
+ if (!rtc->uie_irq_active) {
+ rtc->uie_irq_active = 1;
rtc->stop_uie_polling = 0;
rtc->oldsecs = tm.tm_sec;
rtc->uie_task_active = 1;
@@ -134,6 +135,16 @@
spin_unlock_irq(&rtc->irq_lock);
return 0;
}
+
+int rtc_dev_update_irq_enable_emul(struct rtc_device *rtc, unsigned int enabled)
+{
+ if (enabled)
+ return set_uie(rtc);
+ else
+ return clear_uie(rtc);
+}
+EXPORT_SYMBOL(rtc_dev_update_irq_enable_emul);
+
#endif /* CONFIG_RTC_INTF_DEV_UIE_EMUL */
static ssize_t
@@ -357,6 +368,22 @@
err = rtc_irq_set_state(rtc, NULL, 0);
break;
+ case RTC_AIE_ON:
+ mutex_unlock(&rtc->ops_lock);
+ return rtc_alarm_irq_enable(rtc, 1);
+
+ case RTC_AIE_OFF:
+ mutex_unlock(&rtc->ops_lock);
+ return rtc_alarm_irq_enable(rtc, 0);
+
+ case RTC_UIE_ON:
+ mutex_unlock(&rtc->ops_lock);
+ return rtc_update_irq_enable(rtc, 1);
+
+ case RTC_UIE_OFF:
+ mutex_unlock(&rtc->ops_lock);
+ return rtc_update_irq_enable(rtc, 0);
+
case RTC_IRQP_SET:
err = rtc_irq_set_freq(rtc, NULL, arg);
break;
@@ -401,17 +428,6 @@
err = -EFAULT;
return err;
-#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
- case RTC_UIE_OFF:
- mutex_unlock(&rtc->ops_lock);
- clear_uie(rtc);
- return 0;
-
- case RTC_UIE_ON:
- mutex_unlock(&rtc->ops_lock);
- err = set_uie(rtc);
- return err;
-#endif
default:
err = -ENOTTY;
break;
@@ -440,7 +456,10 @@
* Leave the alarm alone; it may be set to trigger a system wakeup
* later, or be used by kernel code, and is a one-shot event anyway.
*/
+
+ /* Keep ioctl until all drivers are converted */
rtc_dev_ioctl(file, RTC_UIE_OFF, 0);
+ rtc_update_irq_enable(rtc, 0);
rtc_irq_set_state(rtc, NULL, 0);
if (rtc->ops->release)