mmc: dw_mmc: Support predefined mutiple block transfers
This patch adds the support for predefined multiple block r/w.
dw_mmc can support MMC_CAP_CMD23 capability.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 9b839fa..c583b94 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -588,11 +588,11 @@
mci_writel(host, CTYPE, (slot->ctype << slot->id));
}
-static void dw_mci_start_request(struct dw_mci *host,
- struct dw_mci_slot *slot)
+static void __dw_mci_start_request(struct dw_mci *host,
+ struct dw_mci_slot *slot,
+ struct mmc_command *cmd)
{
struct mmc_request *mrq;
- struct mmc_command *cmd;
struct mmc_data *data;
u32 cmdflags;
@@ -610,14 +610,13 @@
host->completed_events = 0;
host->data_status = 0;
- data = mrq->data;
+ data = cmd->data;
if (data) {
dw_mci_set_timeout(host);
mci_writel(host, BYTCNT, data->blksz*data->blocks);
mci_writel(host, BLKSIZ, data->blksz);
}
- cmd = mrq->cmd;
cmdflags = dw_mci_prepare_command(slot->mmc, cmd);
/* this is the first command, send the initialization clock */
@@ -635,6 +634,16 @@
host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
}
+static void dw_mci_start_request(struct dw_mci *host,
+ struct dw_mci_slot *slot)
+{
+ struct mmc_request *mrq = slot->mrq;
+ struct mmc_command *cmd;
+
+ cmd = mrq->sbc ? mrq->sbc : mrq->cmd;
+ __dw_mci_start_request(host, slot, cmd);
+}
+
/* must be called with host->lock held */
static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot,
struct mmc_request *mrq)
@@ -889,7 +898,14 @@
cmd = host->cmd;
host->cmd = NULL;
set_bit(EVENT_CMD_COMPLETE, &host->completed_events);
- dw_mci_command_complete(host, host->mrq->cmd);
+ dw_mci_command_complete(host, cmd);
+ if (cmd == host->mrq->sbc && !cmd->error) {
+ prev_state = state = STATE_SENDING_CMD;
+ __dw_mci_start_request(host, host->cur_slot,
+ host->mrq->cmd);
+ goto unlock;
+ }
+
if (!host->mrq->data || cmd->error) {
dw_mci_request_end(host, host->mrq);
goto unlock;
@@ -967,6 +983,12 @@
goto unlock;
}
+ if (host->mrq->sbc && !data->error) {
+ data->stop->error = 0;
+ dw_mci_request_end(host, host->mrq);
+ goto unlock;
+ }
+
prev_state = state = STATE_SENDING_STOP;
if (!data->error)
send_stop_cmd(host, data);