Thomas Gleixner | d2912cb | 2019-06-04 10:11:33 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0-only |
Markus Pargmann | e2fccf5 | 2015-12-14 14:53:50 +0100 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de> |
Markus Pargmann | e2fccf5 | 2015-12-14 14:53:50 +0100 | [diff] [blame] | 4 | */ |
| 5 | |
| 6 | #include <linux/clk.h> |
| 7 | #include <linux/interrupt.h> |
| 8 | #include <linux/irqchip/chained_irq.h> |
| 9 | #include <linux/irqdesc.h> |
| 10 | #include <linux/irqdomain.h> |
| 11 | #include <linux/irq.h> |
| 12 | #include <linux/mfd/imx25-tsadc.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/of.h> |
| 15 | #include <linux/of_platform.h> |
| 16 | #include <linux/platform_device.h> |
| 17 | #include <linux/regmap.h> |
| 18 | |
| 19 | static struct regmap_config mx25_tsadc_regmap_config = { |
| 20 | .fast_io = true, |
| 21 | .max_register = 8, |
| 22 | .reg_bits = 32, |
| 23 | .val_bits = 32, |
| 24 | .reg_stride = 4, |
| 25 | }; |
| 26 | |
| 27 | static void mx25_tsadc_irq_handler(struct irq_desc *desc) |
| 28 | { |
| 29 | struct mx25_tsadc *tsadc = irq_desc_get_handler_data(desc); |
| 30 | struct irq_chip *chip = irq_desc_get_chip(desc); |
| 31 | u32 status; |
| 32 | |
| 33 | chained_irq_enter(chip, desc); |
| 34 | |
| 35 | regmap_read(tsadc->regs, MX25_TSC_TGSR, &status); |
| 36 | |
| 37 | if (status & MX25_TGSR_GCQ_INT) |
| 38 | generic_handle_irq(irq_find_mapping(tsadc->domain, 1)); |
| 39 | |
| 40 | if (status & MX25_TGSR_TCQ_INT) |
| 41 | generic_handle_irq(irq_find_mapping(tsadc->domain, 0)); |
| 42 | |
| 43 | chained_irq_exit(chip, desc); |
| 44 | } |
| 45 | |
| 46 | static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq, |
| 47 | irq_hw_number_t hwirq) |
| 48 | { |
| 49 | struct mx25_tsadc *tsadc = d->host_data; |
| 50 | |
| 51 | irq_set_chip_data(irq, tsadc); |
| 52 | irq_set_chip_and_handler(irq, &dummy_irq_chip, |
| 53 | handle_level_irq); |
| 54 | irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE); |
| 55 | |
| 56 | return 0; |
| 57 | } |
| 58 | |
Tobias Klauser | 54698c2 | 2017-05-24 18:08:16 +0200 | [diff] [blame] | 59 | static const struct irq_domain_ops mx25_tsadc_domain_ops = { |
Markus Pargmann | e2fccf5 | 2015-12-14 14:53:50 +0100 | [diff] [blame] | 60 | .map = mx25_tsadc_domain_map, |
| 61 | .xlate = irq_domain_xlate_onecell, |
| 62 | }; |
| 63 | |
| 64 | static int mx25_tsadc_setup_irq(struct platform_device *pdev, |
| 65 | struct mx25_tsadc *tsadc) |
| 66 | { |
| 67 | struct device *dev = &pdev->dev; |
| 68 | struct device_node *np = dev->of_node; |
| 69 | int irq; |
| 70 | |
| 71 | irq = platform_get_irq(pdev, 0); |
| 72 | if (irq <= 0) { |
| 73 | dev_err(dev, "Failed to get irq\n"); |
| 74 | return irq; |
| 75 | } |
| 76 | |
| 77 | tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops, |
| 78 | tsadc); |
| 79 | if (!tsadc->domain) { |
| 80 | dev_err(dev, "Failed to add irq domain\n"); |
| 81 | return -ENOMEM; |
| 82 | } |
| 83 | |
Martin Kaiser | f132bc3 | 2017-09-12 10:34:15 +0200 | [diff] [blame] | 84 | irq_set_chained_handler_and_data(irq, mx25_tsadc_irq_handler, tsadc); |
Markus Pargmann | e2fccf5 | 2015-12-14 14:53:50 +0100 | [diff] [blame] | 85 | |
| 86 | return 0; |
| 87 | } |
| 88 | |
| 89 | static void mx25_tsadc_setup_clk(struct platform_device *pdev, |
| 90 | struct mx25_tsadc *tsadc) |
| 91 | { |
| 92 | unsigned clk_div; |
| 93 | |
| 94 | /* |
| 95 | * According to the datasheet the ADC clock should never |
| 96 | * exceed 1,75 MHz. Base clock is the IPG and the ADC unit uses |
| 97 | * a funny clock divider. To keep the ADC conversion time constant |
| 98 | * adapt the ADC internal clock divider to the IPG clock rate. |
| 99 | */ |
| 100 | |
| 101 | dev_dbg(&pdev->dev, "Found master clock at %lu Hz\n", |
| 102 | clk_get_rate(tsadc->clk)); |
| 103 | |
| 104 | clk_div = DIV_ROUND_UP(clk_get_rate(tsadc->clk), 1750000); |
| 105 | dev_dbg(&pdev->dev, "Setting up ADC clock divider to %u\n", clk_div); |
| 106 | |
| 107 | /* adc clock = IPG clock / (2 * div + 2) */ |
| 108 | clk_div -= 2; |
| 109 | clk_div /= 2; |
| 110 | |
| 111 | /* |
| 112 | * the ADC clock divider changes its behaviour when values below 4 |
| 113 | * are used: it is fixed to "/ 10" in this case |
| 114 | */ |
| 115 | clk_div = max_t(unsigned, 4, clk_div); |
| 116 | |
| 117 | dev_dbg(&pdev->dev, "Resulting ADC conversion clock at %lu Hz\n", |
| 118 | clk_get_rate(tsadc->clk) / (2 * clk_div + 2)); |
| 119 | |
| 120 | regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, |
| 121 | MX25_TGCR_ADCCLKCFG(0x1f), |
| 122 | MX25_TGCR_ADCCLKCFG(clk_div)); |
| 123 | } |
| 124 | |
| 125 | static int mx25_tsadc_probe(struct platform_device *pdev) |
| 126 | { |
| 127 | struct device *dev = &pdev->dev; |
Markus Pargmann | e2fccf5 | 2015-12-14 14:53:50 +0100 | [diff] [blame] | 128 | struct mx25_tsadc *tsadc; |
| 129 | struct resource *res; |
| 130 | int ret; |
| 131 | void __iomem *iomem; |
| 132 | |
| 133 | tsadc = devm_kzalloc(dev, sizeof(*tsadc), GFP_KERNEL); |
| 134 | if (!tsadc) |
| 135 | return -ENOMEM; |
| 136 | |
| 137 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 138 | iomem = devm_ioremap_resource(dev, res); |
| 139 | if (IS_ERR(iomem)) |
| 140 | return PTR_ERR(iomem); |
| 141 | |
| 142 | tsadc->regs = devm_regmap_init_mmio(dev, iomem, |
| 143 | &mx25_tsadc_regmap_config); |
| 144 | if (IS_ERR(tsadc->regs)) { |
| 145 | dev_err(dev, "Failed to initialize regmap\n"); |
| 146 | return PTR_ERR(tsadc->regs); |
| 147 | } |
| 148 | |
| 149 | tsadc->clk = devm_clk_get(dev, "ipg"); |
| 150 | if (IS_ERR(tsadc->clk)) { |
| 151 | dev_err(dev, "Failed to get ipg clock\n"); |
| 152 | return PTR_ERR(tsadc->clk); |
| 153 | } |
| 154 | |
| 155 | /* setup clock according to the datasheet */ |
| 156 | mx25_tsadc_setup_clk(pdev, tsadc); |
| 157 | |
| 158 | /* Enable clock and reset the component */ |
| 159 | regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN, |
| 160 | MX25_TGCR_CLK_EN); |
| 161 | regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST, |
| 162 | MX25_TGCR_TSC_RST); |
| 163 | |
| 164 | /* Setup powersaving mode, but enable internal reference voltage */ |
| 165 | regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK, |
| 166 | MX25_TGCR_POWERMODE_SAVE); |
| 167 | regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN, |
| 168 | MX25_TGCR_INTREFEN); |
| 169 | |
| 170 | ret = mx25_tsadc_setup_irq(pdev, tsadc); |
| 171 | if (ret) |
| 172 | return ret; |
| 173 | |
| 174 | platform_set_drvdata(pdev, tsadc); |
| 175 | |
Benjamin Gaignard | a55196e | 2017-05-29 17:45:57 +0200 | [diff] [blame] | 176 | return devm_of_platform_populate(dev); |
Markus Pargmann | e2fccf5 | 2015-12-14 14:53:50 +0100 | [diff] [blame] | 177 | } |
| 178 | |
Martin Kaiser | 18f7739 | 2017-10-17 22:53:08 +0200 | [diff] [blame] | 179 | static int mx25_tsadc_remove(struct platform_device *pdev) |
| 180 | { |
| 181 | struct mx25_tsadc *tsadc = platform_get_drvdata(pdev); |
| 182 | int irq = platform_get_irq(pdev, 0); |
| 183 | |
| 184 | if (irq) { |
| 185 | irq_set_chained_handler_and_data(irq, NULL, NULL); |
| 186 | irq_domain_remove(tsadc->domain); |
| 187 | } |
| 188 | |
| 189 | return 0; |
| 190 | } |
| 191 | |
Markus Pargmann | e2fccf5 | 2015-12-14 14:53:50 +0100 | [diff] [blame] | 192 | static const struct of_device_id mx25_tsadc_ids[] = { |
| 193 | { .compatible = "fsl,imx25-tsadc" }, |
| 194 | { /* Sentinel */ } |
| 195 | }; |
Javier Martinez Canillas | a893764 | 2016-10-14 12:40:50 -0300 | [diff] [blame] | 196 | MODULE_DEVICE_TABLE(of, mx25_tsadc_ids); |
Markus Pargmann | e2fccf5 | 2015-12-14 14:53:50 +0100 | [diff] [blame] | 197 | |
| 198 | static struct platform_driver mx25_tsadc_driver = { |
| 199 | .driver = { |
| 200 | .name = "mx25-tsadc", |
| 201 | .of_match_table = of_match_ptr(mx25_tsadc_ids), |
| 202 | }, |
| 203 | .probe = mx25_tsadc_probe, |
Martin Kaiser | 18f7739 | 2017-10-17 22:53:08 +0200 | [diff] [blame] | 204 | .remove = mx25_tsadc_remove, |
Markus Pargmann | e2fccf5 | 2015-12-14 14:53:50 +0100 | [diff] [blame] | 205 | }; |
| 206 | module_platform_driver(mx25_tsadc_driver); |
| 207 | |
| 208 | MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25"); |
| 209 | MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>"); |
| 210 | MODULE_LICENSE("GPL v2"); |
| 211 | MODULE_ALIAS("platform:mx25-tsadc"); |