wil6210: limit fw error recovery attempts
In case there is something fundamentally wrong with the firmware
(example: RF cable disconnected), FW will always crash immediately
after reset. This leads to infinite fw error recovery loop.
Count consecutive unsuccessful error recovery attempts in a short period
of time, and stop doing recovery after some reasonable count.
It is still possible to manually reset fw doing
interface down/up sequence.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 670cc6d..f24cb92 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -161,12 +161,30 @@
if (no_fw_recovery)
return;
+ /* increment @recovery_count if less then WIL6210_FW_RECOVERY_TO
+ * passed since last recovery attempt
+ */
+ if (time_is_after_jiffies(wil->last_fw_recovery +
+ WIL6210_FW_RECOVERY_TO))
+ wil->recovery_count++;
+ else
+ wil->recovery_count = 1; /* fw was alive for a long time */
+
+ if (wil->recovery_count > WIL6210_FW_RECOVERY_RETRIES) {
+ wil_err(wil, "too many recovery attempts (%d), giving up\n",
+ wil->recovery_count);
+ return;
+ }
+
+ wil->last_fw_recovery = jiffies;
+
mutex_lock(&wil->mutex);
switch (wdev->iftype) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_MONITOR:
- wil_info(wil, "fw error recovery started...\n");
+ wil_info(wil, "fw error recovery started (try %d)...\n",
+ wil->recovery_count);
wil_reset(wil);
/* need to re-allocate Rx ring after reset */
@@ -249,6 +267,8 @@
return -EAGAIN;
}
+ wil->last_fw_recovery = jiffies;
+
return 0;
}
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 3427ac4..f8c598e 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -40,6 +40,8 @@
#define WIL6210_MAX_CID (8) /* HW limit */
#define WIL6210_NAPI_BUDGET (16) /* arbitrary */
#define WIL6210_ITR_TRSH (10000) /* arbitrary - about 15 IRQs/msec */
+#define WIL6210_FW_RECOVERY_RETRIES (5) /* try to recover this many times */
+#define WIL6210_FW_RECOVERY_TO msecs_to_jiffies(5000)
/* Hardware definitions begin */
@@ -361,6 +363,8 @@
u32 fw_version;
u32 hw_version;
u8 n_mids; /* number of additional MIDs as reported by FW */
+ int recovery_count; /* num of FW recovery attempts in a short time */
+ unsigned long last_fw_recovery; /* jiffies of last fw recovery */
/* profile */
u32 monitor_flags;
u32 secure_pcp; /* create secure PCP? */