[media] radio-gemtek: Convert to radio-isa
Tested with actual hardware (up to two cards) and the Keene USB FM Transmitter.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 645fe57..06a8c7a 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -276,6 +276,7 @@
config RADIO_GEMTEK
tristate "GemTek Radio card (or compatible) support"
depends on ISA && VIDEO_V4L2
+ select RADIO_ISA
---help---
Choose Y here if you have this FM radio card, and then fill in the
I/O port address and settings below. The following cards either have
@@ -285,23 +286,21 @@
- Typhoon Radio card (some models)
- Hama Radio card
- In order to control your radio card, you will need to use programs
- that are compatible with the Video For Linux API. Information on
- this API and pointers to "v4l" programs may be found at
- <file:Documentation/video4linux/API.html>.
-
To compile this driver as a module, choose M here: the
module will be called radio-gemtek.
config RADIO_GEMTEK_PORT
- hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
+ hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
depends on RADIO_GEMTEK=y
default "34c"
help
- Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
- 0x34c, if you haven't changed the jumper setting on the card. On
- Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
+ Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
+ card default is 0x34c, if you haven't changed the jumper setting
+ on the card.
+
+ On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
port is 0x20c, 0x248 or 0x28c.
+
If automatic I/O port probing is enabled this port will be used only
in case of automatic probing failure, ie. as a fallback.