qla2xxx: T10-Dif: add T10-PI support
Add support for T10-Dif for Target Mode to qla driver.
The driver will look for firmware attribute that support
this feature. When the feature is present, the capabilities
will be report to TCM layer.
Add CTIO CRC2 iocb to build T10-Dif commands.
Add support routines to process good & error cases.
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index ce33d8c..f873e10 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -293,6 +293,7 @@
#define CTIO_ABORTED 0x02
#define CTIO_INVALID_RX_ID 0x08
#define CTIO_TIMEOUT 0x0B
+#define CTIO_DIF_ERROR 0x0C /* DIF error detected */
#define CTIO_LIP_RESET 0x0E
#define CTIO_TARGET_RESET 0x17
#define CTIO_PORT_UNAVAILABLE 0x28
@@ -498,11 +499,12 @@
#define CTIO7_FLAGS_DONT_RET_CTIO BIT_8
#define CTIO7_FLAGS_STATUS_MODE_0 0
#define CTIO7_FLAGS_STATUS_MODE_1 BIT_6
+#define CTIO7_FLAGS_STATUS_MODE_2 BIT_7
#define CTIO7_FLAGS_EXPLICIT_CONFORM BIT_5
#define CTIO7_FLAGS_CONFIRM_SATISF BIT_4
#define CTIO7_FLAGS_DSD_PTR BIT_2
-#define CTIO7_FLAGS_DATA_IN BIT_1
-#define CTIO7_FLAGS_DATA_OUT BIT_0
+#define CTIO7_FLAGS_DATA_IN BIT_1 /* data to initiator */
+#define CTIO7_FLAGS_DATA_OUT BIT_0 /* data from initiator */
#define ELS_PLOGI 0x3
#define ELS_FLOGI 0x4
@@ -514,6 +516,68 @@
#define ELS_ADISC 0x52
/*
+ *CTIO Type CRC_2 IOCB
+ */
+struct ctio_crc2_to_fw {
+ uint8_t entry_type; /* Entry type. */
+#define CTIO_CRC2 0x7A
+ uint8_t entry_count; /* Entry count. */
+ uint8_t sys_define; /* System defined. */
+ uint8_t entry_status; /* Entry Status. */
+
+ uint32_t handle; /* System handle. */
+ uint16_t nport_handle; /* N_PORT handle. */
+ uint16_t timeout; /* Command timeout. */
+
+ uint16_t dseg_count; /* Data segment count. */
+ uint8_t vp_index;
+ uint8_t add_flags; /* additional flags */
+#define CTIO_CRC2_AF_DIF_DSD_ENA BIT_3
+
+ uint8_t initiator_id[3]; /* initiator ID */
+ uint8_t reserved1;
+ uint32_t exchange_addr; /* rcv exchange address */
+ uint16_t reserved2;
+ uint16_t flags; /* refer to CTIO7 flags values */
+ uint32_t residual;
+ uint16_t ox_id;
+ uint16_t scsi_status;
+ uint32_t relative_offset;
+ uint32_t reserved5;
+ uint32_t transfer_length; /* total fc transfer length */
+ uint32_t reserved6;
+ uint32_t crc_context_address[2];/* Data segment address. */
+ uint16_t crc_context_len; /* Data segment length. */
+ uint16_t reserved_1; /* MUST be set to 0. */
+} __packed;
+
+/* CTIO Type CRC_x Status IOCB */
+struct ctio_crc_from_fw {
+ uint8_t entry_type; /* Entry type. */
+ uint8_t entry_count; /* Entry count. */
+ uint8_t sys_define; /* System defined. */
+ uint8_t entry_status; /* Entry Status. */
+
+ uint32_t handle; /* System handle. */
+ uint16_t status;
+ uint16_t timeout; /* Command timeout. */
+ uint16_t dseg_count; /* Data segment count. */
+ uint32_t reserved1;
+ uint16_t state_flags;
+#define CTIO_CRC_SF_DIF_CHOPPED BIT_4
+
+ uint32_t exchange_address; /* rcv exchange address */
+ uint16_t reserved2;
+ uint16_t flags;
+ uint32_t resid_xfer_length;
+ uint16_t ox_id;
+ uint8_t reserved3[12];
+ uint16_t runt_guard; /* reported runt blk guard */
+ uint8_t actual_dif[8];
+ uint8_t expected_dif[8];
+} __packed;
+
+/*
* ISP queue - ABTS received/response entries structure definition for 24xx.
*/
#define ABTS_RECV_24XX 0x54 /* ABTS received (for 24xx) */
@@ -641,6 +705,7 @@
int (*handle_cmd)(struct scsi_qla_host *, struct qla_tgt_cmd *,
unsigned char *, uint32_t, int, int, int);
void (*handle_data)(struct qla_tgt_cmd *);
+ void (*handle_dif_err)(struct qla_tgt_cmd *);
int (*handle_tmr)(struct qla_tgt_mgmt_cmd *, uint32_t, uint8_t,
uint32_t);
void (*free_cmd)(struct qla_tgt_cmd *);
@@ -829,9 +894,9 @@
};
struct qla_tgt_cmd {
+ struct se_cmd se_cmd;
struct qla_tgt_sess *sess;
int state;
- struct se_cmd se_cmd;
struct work_struct free_work;
struct work_struct work;
/* Sense buffer that will be mapped into outgoing status */
@@ -843,6 +908,7 @@
unsigned int free_sg:1;
unsigned int aborted:1; /* Needed in case of SRR */
unsigned int write_data_transferred:1;
+ unsigned int ctx_dsd_alloced:1;
struct scatterlist *sg; /* cmd data buffer SG vector */
int sg_cnt; /* SG segments count */
@@ -857,6 +923,12 @@
struct scsi_qla_host *vha;
struct atio_from_isp atio;
+ /* t10dif */
+ struct scatterlist *prot_sg;
+ uint32_t prot_sg_cnt;
+ uint32_t blk_sz;
+ struct crc_context *ctx;
+
};
struct qla_tgt_sess_work_param {
@@ -901,6 +973,10 @@
int sense_buffer_len;
int residual;
int add_status_pkt;
+ /* dif */
+ struct scatterlist *prot_sg;
+ uint16_t prot_seg_cnt;
+ uint16_t tot_dsds;
};
struct qla_tgt_srr_imm {
@@ -976,6 +1052,8 @@
extern void qlt_response_pkt_all_vps(struct scsi_qla_host *, response_t *);
extern int qlt_rdy_to_xfer(struct qla_tgt_cmd *);
extern int qlt_xmit_response(struct qla_tgt_cmd *, int, uint8_t);
+extern int qlt_rdy_to_xfer_dif(struct qla_tgt_cmd *);
+extern int qlt_xmit_response_dif(struct qla_tgt_cmd *, int, uint8_t);
extern void qlt_xmit_tm_rsp(struct qla_tgt_mgmt_cmd *);
extern void qlt_free_mcmd(struct qla_tgt_mgmt_cmd *);
extern void qlt_free_cmd(struct qla_tgt_cmd *cmd);