mmc: omap_hsmmc: call omap_hsmmc_set_power directly
If no pdata.set_power was set by the platform code, the driver
was updating pdata with its own fallback function. This is a no-no
since pdata shall be read-only.
This patch pushes the check 'pdata->set_power != NULL' down into
the fallback functions. If pdata.set_power is really set, it calls them
and exits, otherwise the fallback code is used.
Signed-off-by: Andreas Fenkart <afenkart@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 4d12032..1fad7c7 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -213,7 +213,6 @@
int context_loss;
int protect_card;
int reqs_blocked;
- int use_reg;
int req_in_progress;
unsigned long clk_rate;
unsigned int flags;
@@ -262,6 +261,9 @@
platform_get_drvdata(to_platform_device(dev));
int ret = 0;
+ if (mmc_pdata(host)->set_power)
+ return mmc_pdata(host)->set_power(dev, power_on, vdd);
+
/*
* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.
@@ -344,6 +346,9 @@
struct regulator *reg;
int ocr_value = 0;
+ if (mmc_pdata(host)->set_power)
+ return 0;
+
reg = devm_regulator_get(host->dev, "vmmc");
if (IS_ERR(reg)) {
dev_err(host->dev, "unable to get vmmc regulator %ld\n",
@@ -363,7 +368,6 @@
}
}
}
- mmc_pdata(host)->set_power = omap_hsmmc_set_power;
/* Allow an aux regulator */
reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
@@ -383,8 +387,8 @@
(host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
int vdd = ffs(mmc_pdata(host)->ocr_mask) - 1;
- mmc_pdata(host)->set_power(host->dev, 1, vdd);
- mmc_pdata(host)->set_power(host->dev, 0, 0);
+ omap_hsmmc_set_power(host->dev, 1, vdd);
+ omap_hsmmc_set_power(host->dev, 0, 0);
}
return 0;
@@ -392,7 +396,8 @@
static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
{
- mmc_pdata(host)->set_power = NULL;
+ if (mmc_pdata(host)->set_power)
+ return;
}
static inline int omap_hsmmc_have_reg(void)
@@ -402,6 +407,11 @@
#else
+static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
+{
+ return 0;
+}
+
static inline int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
{
return -EINVAL;
@@ -1149,11 +1159,11 @@
clk_disable_unprepare(host->dbclk);
/* Turn the power off */
- ret = mmc_pdata(host)->set_power(host->dev, 0, 0);
+ ret = omap_hsmmc_set_power(host->dev, 0, 0);
/* Turn the power ON with given VDD 1.8 or 3.0v */
if (!ret)
- ret = mmc_pdata(host)->set_power(host->dev, 1, vdd);
+ ret = omap_hsmmc_set_power(host->dev, 1, vdd);
pm_runtime_get_sync(host->dev);
if (host->dbclk)
clk_prepare_enable(host->dbclk);
@@ -1552,10 +1562,10 @@
if (ios->power_mode != host->power_mode) {
switch (ios->power_mode) {
case MMC_POWER_OFF:
- mmc_pdata(host)->set_power(host->dev, 0, 0);
+ omap_hsmmc_set_power(host->dev, 0, 0);
break;
case MMC_POWER_UP:
- mmc_pdata(host)->set_power(host->dev, 1, ios->vdd);
+ omap_hsmmc_set_power(host->dev, 1, ios->vdd);
break;
case MMC_POWER_ON:
do_send_init_stream = 1;
@@ -2078,11 +2088,10 @@
goto err_irq;
}
- if (omap_hsmmc_have_reg() && !mmc_pdata(host)->set_power) {
+ if (omap_hsmmc_have_reg()) {
ret = omap_hsmmc_reg_get(host);
if (ret)
goto err_irq;
- host->use_reg = 1;
}
mmc->ocr_avail = mmc_pdata(host)->ocr_mask;
@@ -2125,8 +2134,7 @@
err_slot_name:
mmc_remove_host(mmc);
- if (host->use_reg)
- omap_hsmmc_reg_put(host);
+ omap_hsmmc_reg_put(host);
err_irq:
device_init_wakeup(&pdev->dev, false);
if (host->tx_chan)
@@ -2150,8 +2158,7 @@
pm_runtime_get_sync(host->dev);
mmc_remove_host(host->mmc);
- if (host->use_reg)
- omap_hsmmc_reg_put(host);
+ omap_hsmmc_reg_put(host);
if (host->tx_chan)
dma_release_channel(host->tx_chan);