Doc: clarify source of jitter in USB1.1, and USB2.0
Even though the jitter due to USB1.1 may be 1ms,
NTP can reduce its effect significantly. And
USB2.0 reduces this anyway.
Signed-off-by: Sanjeev Gupta <ghane0@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
diff --git a/Documentation/pps/pps.txt b/Documentation/pps/pps.txt
index a9f53bb..1fdbd54 100644
--- a/Documentation/pps/pps.txt
+++ b/Documentation/pps/pps.txt
@@ -72,8 +72,11 @@
It is possible to grab the PPS from an USB to serial device. However,
you should take into account the latencies and jitter introduced by
the USB stack. Users have reported clock instability around +-1ms when
-synchronized with PPS through USB. This isn't suited for time server
-synchronization.
+synchronized with PPS through USB. With USB 2.0, jitter may decrease
+down to the order of 125 microseconds.
+
+This may be suitable for time server synchronization with NTP because
+of its undersampling and algorithms.
If your device doesn't report PPS, you can check that the feature is
supported by its driver. Most of the time, you only need to add a call