diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 1c8afd9..f020de1 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -63,11 +63,17 @@
 #include <asm/sections.h>
 #include <asm/io.h>
 #include <asm/irq.h>
+
+#ifdef CONFIG_PPC_PMAC
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/pmac_feature.h>
 #include <asm/dbdma.h>
 #include <asm/macio.h>
+#else
+#include <linux/platform_device.h>
+#define of_machine_is_compatible(x) (0)
+#endif
 
 #if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -83,11 +89,9 @@
 
 static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
 MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("Driver for the PowerMac serial ports.");
+MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports.");
 MODULE_LICENSE("GPL");
 
-#define PWRDBG(fmt, arg...)	printk(KERN_DEBUG fmt , ## arg)
-
 #ifdef CONFIG_SERIAL_PMACZILOG_TTYS
 #define PMACZILOG_MAJOR		TTY_MAJOR
 #define PMACZILOG_MINOR		64
@@ -341,7 +345,7 @@
 	uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
 	write_zsreg(uap, R1, uap->curregs[R1]);
 	zssync(uap);
-	dev_err(&uap->dev->ofdev.dev, "pmz: rx irq flood !\n");
+	pmz_error("pmz: rx irq flood !\n");
 	return tty;
 }
 
@@ -757,6 +761,8 @@
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
+#ifdef CONFIG_PPC_PMAC
+
 /*
  * Turn power on or off to the SCC and associated stuff
  * (port drivers, modem, IR port, etc.)
@@ -792,6 +798,15 @@
 	return delay;
 }
 
+#else
+
+static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_PPC_PMAC */
+
 /*
  * FixZeroBug....Works around a bug in the SCC receving channel.
  * Inspired from Darwin code, 15 Sept. 2000  -DanM
@@ -954,9 +969,9 @@
 	}	
 
 	pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
-	if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) {
-		dev_err(&uap->dev->ofdev.dev,
-			"Unable to register zs interrupt handler.\n");
+	if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
+			"SCC", uap)) {
+		pmz_error("Unable to register zs interrupt handler.\n");
 		pmz_set_scc_power(uap, 0);
 		mutex_unlock(&pmz_irq_mutex);
 		return -ENXIO;
@@ -1196,7 +1211,7 @@
 	while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0
 	       || (read_zsreg(uap, R1) & ALL_SNT) == 0) {
 		if (--t <= 0) {
-			dev_err(&uap->dev->ofdev.dev, "transmitter didn't drain\n");
+			pmz_error("transmitter didn't drain\n");
 			return;
 		}
 		udelay(10);
@@ -1212,7 +1227,7 @@
 		read_zsdata(uap);
 		mdelay(10);
 		if (--t <= 0) {
-			dev_err(&uap->dev->ofdev.dev, "receiver didn't drain\n");
+			pmz_error("receiver didn't drain\n");
 			return;
 		}
 	}
@@ -1233,8 +1248,7 @@
 	t = 5000;
 	while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
 		if (--t <= 0) {
-			dev_err(&uap->dev->ofdev.dev,
-				"irda_setup timed out on get_version byte\n");
+			pmz_error("irda_setup timed out on get_version byte\n");
 			goto out;
 		}
 		udelay(10);
@@ -1242,8 +1256,7 @@
 	version = read_zsdata(uap);
 
 	if (version < 4) {
-		dev_info(&uap->dev->ofdev.dev, "IrDA: dongle version %d not supported\n",
-			 version);
+		pmz_info("IrDA: dongle version %d not supported\n", version);
 		goto out;
 	}
 
@@ -1252,18 +1265,16 @@
 	t = 5000;
 	while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
 		if (--t <= 0) {
-			dev_err(&uap->dev->ofdev.dev,
-				"irda_setup timed out on speed mode byte\n");
+			pmz_error("irda_setup timed out on speed mode byte\n");
 			goto out;
 		}
 		udelay(10);
 	}
 	t = read_zsdata(uap);
 	if (t != cmdbyte)
-		dev_err(&uap->dev->ofdev.dev,
-			"irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
+		pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
 
-	dev_info(&uap->dev->ofdev.dev, "IrDA setup for %ld bps, dongle version: %d\n",
+	pmz_info("IrDA setup for %ld bps, dongle version: %d\n",
 		 *baud, version);
 
 	(void)read_zsdata(uap);
@@ -1413,7 +1424,7 @@
 	write_zsdata(uap, c);
 }
 
-#endif
+#endif /* CONFIG_CONSOLE_POLL */
 
 static struct uart_ops pmz_pops = {
 	.tx_empty	=	pmz_tx_empty,
@@ -1438,6 +1449,8 @@
 #endif
 };
 
+#ifdef CONFIG_PPC_PMAC
+
 /*
  * Setup one port structure after probing, HW is down at this point,
  * Unlike sunzilog, we don't need to pre-init the spinlock as we don't
@@ -1834,6 +1847,88 @@
 	return 0;
 }
 
+#else
+
+extern struct platform_device scc_a_pdev, scc_b_pdev;
+
+static int __init pmz_init_port(struct uart_pmac_port *uap)
+{
+	struct resource *r_ports;
+	int irq;
+
+	r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(uap->node, 0);
+	if (!r_ports || !irq)
+		return -ENODEV;
+
+	uap->port.mapbase  = r_ports->start;
+	uap->port.membase  = (unsigned char __iomem *) r_ports->start;
+	uap->port.iotype   = UPIO_MEM;
+	uap->port.irq      = irq;
+	uap->port.uartclk  = ZS_CLOCK;
+	uap->port.fifosize = 1;
+	uap->port.ops      = &pmz_pops;
+	uap->port.type     = PORT_PMAC_ZILOG;
+	uap->port.flags    = 0;
+
+	uap->control_reg   = uap->port.membase;
+	uap->data_reg      = uap->control_reg + 4;
+	uap->port_type     = 0;
+
+	pmz_convert_to_zs(uap, CS8, 0, 9600);
+
+	return 0;
+}
+
+static int __init pmz_probe(void)
+{
+	int err;
+
+	pmz_ports_count = 0;
+
+	pmz_ports[0].mate      = &pmz_ports[1];
+	pmz_ports[0].port.line = 0;
+	pmz_ports[0].flags     = PMACZILOG_FLAG_IS_CHANNEL_A;
+	pmz_ports[0].node      = &scc_a_pdev;
+	err = pmz_init_port(&pmz_ports[0]);
+	if (err)
+		return err;
+	pmz_ports_count++;
+
+	pmz_ports[1].mate      = &pmz_ports[0];
+	pmz_ports[1].port.line = 1;
+	pmz_ports[1].flags     = 0;
+	pmz_ports[1].node      = &scc_b_pdev;
+	err = pmz_init_port(&pmz_ports[1]);
+	if (err)
+		return err;
+	pmz_ports_count++;
+
+	return 0;
+}
+
+static void pmz_dispose_port(struct uart_pmac_port *uap)
+{
+	memset(uap, 0, sizeof(struct uart_pmac_port));
+}
+
+static int __init pmz_attach(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < pmz_ports_count; i++)
+		if (pmz_ports[i].node == pdev)
+			return 0;
+	return -ENODEV;
+}
+
+static int __exit pmz_detach(struct platform_device *pdev)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_PPC_PMAC */
+
 #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
 
 static void pmz_console_write(struct console *con, const char *s, unsigned int count);
@@ -1894,6 +1989,8 @@
 	return rc;
 }
 
+#ifdef CONFIG_PPC_PMAC
+
 static struct of_device_id pmz_match[] = 
 {
 	{
@@ -1915,6 +2012,18 @@
 	.resume		= pmz_resume,
 };
 
+#else
+
+static struct platform_driver pmz_driver = {
+	.remove		= __exit_p(pmz_detach),
+	.driver		= {
+		.name		= "scc",
+		.owner		= THIS_MODULE,
+	},
+};
+
+#endif /* !CONFIG_PPC_PMAC */
+
 static int __init init_pmz(void)
 {
 	int rc, i;
@@ -1953,15 +2062,23 @@
 	/*
 	 * Then we register the macio driver itself
 	 */
+#ifdef CONFIG_PPC_PMAC
 	return macio_register_driver(&pmz_driver);
+#else
+	return platform_driver_probe(&pmz_driver, pmz_attach);
+#endif
 }
 
 static void __exit exit_pmz(void)
 {
 	int i;
 
+#ifdef CONFIG_PPC_PMAC
 	/* Get rid of macio-driver (detach from macio) */
 	macio_unregister_driver(&pmz_driver);
+#else
+	platform_driver_unregister(&pmz_driver);
+#endif
 
 	for (i = 0; i < pmz_ports_count; i++) {
 		struct uart_pmac_port *uport = &pmz_ports[i];