can: sja1000: plx_pci: add support for Connect Tech Inc's Canpro/104-Plus Opto CAN board
Patch adds support for CANpro/104-Plus Opto CAN board. Board uses PLX9030
bridge and two NXP SJA1000 CAN controllers. Patch is generated and tested with
kernel 3.6.1.
Signed-off-by: Muhammad Ghias <mghias@connecttech.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
[mkl: minor adjustments to commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index 8bc9598..dc04407 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -44,6 +44,7 @@
"esd CAN-PCI/CPCI/PCI104/200, "
"esd CAN-PCI/PMC/266, "
"esd CAN-PCIe/2000, "
+ "Connect Tech Inc. CANpro/104-Plus Opto (CRG001), "
"IXXAT PC-I 04/PCI")
MODULE_LICENSE("GPL v2");
@@ -131,6 +132,9 @@
#define TEWS_PCI_VENDOR_ID 0x1498
#define TEWS_PCI_DEVICE_ID_TMPC810 0x032A
+#define CTI_PCI_VENDOR_ID 0x12c4
+#define CTI_PCI_DEVICE_ID_CRG001 0x0900
+
static void plx_pci_reset_common(struct pci_dev *pdev);
static void plx_pci_reset_marathon(struct pci_dev *pdev);
static void plx9056_pci_reset_common(struct pci_dev *pdev);
@@ -222,6 +226,14 @@
/* based on PLX9030 */
};
+static struct plx_pci_card_info plx_pci_card_info_cti __devinitdata = {
+ "Connect Tech Inc. CANpro/104-Plus Opto (CRG001)", 2,
+ PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
+ {0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} },
+ &plx_pci_reset_common
+ /* based on PLX9030 */
+};
+
static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = {
{
/* Adlink PCI-7841/cPCI-7841 */
@@ -300,6 +312,13 @@
0, 0,
(kernel_ulong_t)&plx_pci_card_info_tews
},
+ {
+ /* Connect Tech Inc. CANpro/104-Plus Opto (CRG001) card */
+ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+ CTI_PCI_VENDOR_ID, CTI_PCI_DEVICE_ID_CRG001,
+ 0, 0,
+ (kernel_ulong_t)&plx_pci_card_info_cti
+ },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, plx_pci_tbl);