tg3: Move tg3_init_link_config to tg3_phy_probe
This patch moves the function that initializes the link configuration
closer to the place where the rest of the phy code is initialized.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 159eb23..2c67cc9 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12557,12 +12557,45 @@
return ((thalf_otp & 0x0000ffff) << 16) | (bhalf_otp >> 16);
}
+static void __devinit tg3_phy_init_link_config(struct tg3 *tp)
+{
+ u32 adv = ADVERTISED_Autoneg |
+ ADVERTISED_Pause;
+
+ if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY))
+ adv |= ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full;
+
+ if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES))
+ adv |= ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_TP;
+ else
+ adv |= ADVERTISED_FIBRE;
+
+ tp->link_config.advertising = adv;
+ tp->link_config.speed = SPEED_INVALID;
+ tp->link_config.duplex = DUPLEX_INVALID;
+ tp->link_config.autoneg = AUTONEG_ENABLE;
+ tp->link_config.active_speed = SPEED_INVALID;
+ tp->link_config.active_duplex = DUPLEX_INVALID;
+ tp->link_config.orig_speed = SPEED_INVALID;
+ tp->link_config.orig_duplex = DUPLEX_INVALID;
+ tp->link_config.orig_autoneg = AUTONEG_INVALID;
+}
+
static int __devinit tg3_phy_probe(struct tg3 *tp)
{
u32 hw_phy_id_1, hw_phy_id_2;
u32 hw_phy_id, hw_phy_id_masked;
int err;
+ /* flow control autonegotiation is default behavior */
+ tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
+ tp->link_config.flowctrl = FLOW_CTRL_TX | FLOW_CTRL_RX;
+
if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)
return tg3_phy_init(tp);
@@ -12624,6 +12657,8 @@
tp->pci_chip_rev_id != CHIPREV_ID_57765_A0)))
tp->phy_flags |= TG3_PHYFLG_EEE_CAP;
+ tg3_phy_init_link_config(tp);
+
if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) &&
!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
@@ -12679,17 +12714,6 @@
err = tg3_init_5401phy_dsp(tp);
}
- if (tp->phy_flags & TG3_PHYFLG_ANY_SERDES)
- tp->link_config.advertising =
- (ADVERTISED_1000baseT_Half |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_Autoneg |
- ADVERTISED_FIBRE);
- if (tp->phy_flags & TG3_PHYFLG_10_100_ONLY)
- tp->link_config.advertising &=
- ~(ADVERTISED_1000baseT_Half |
- ADVERTISED_1000baseT_Full);
-
return err;
}
@@ -14422,23 +14446,6 @@
return ret;
}
-static void __devinit tg3_init_link_config(struct tg3 *tp)
-{
- tp->link_config.advertising =
- (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full |
- ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full |
- ADVERTISED_Autoneg | ADVERTISED_MII);
- tp->link_config.speed = SPEED_INVALID;
- tp->link_config.duplex = DUPLEX_INVALID;
- tp->link_config.autoneg = AUTONEG_ENABLE;
- tp->link_config.active_speed = SPEED_INVALID;
- tp->link_config.active_duplex = DUPLEX_INVALID;
- tp->link_config.orig_speed = SPEED_INVALID;
- tp->link_config.orig_duplex = DUPLEX_INVALID;
- tp->link_config.orig_autoneg = AUTONEG_INVALID;
-}
-
static void __devinit tg3_init_bufmgr_config(struct tg3 *tp)
{
if (tp->tg3_flags3 & TG3_FLG3_5717_PLUS) {
@@ -14742,8 +14749,6 @@
goto err_out_free_dev;
}
- tg3_init_link_config(tp);
-
tp->rx_pending = TG3_DEF_RX_RING_PENDING;
tp->rx_jumbo_pending = TG3_DEF_RX_JUMBO_RING_PENDING;
@@ -14891,10 +14896,6 @@
goto err_out_apeunmap;
}
- /* flow control autonegotiation is default behavior */
- tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
- tp->link_config.flowctrl = FLOW_CTRL_TX | FLOW_CTRL_RX;
-
intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW;
rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW;
sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW;