iwlwifi: don't use implicit priv in IWL_DEBUG

Call IWL_DEBUG macro with explicit priv argument.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index c8865d0..8f65908 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -494,7 +494,7 @@
 
 	missed_beacon = &pkt->u.missed_beacon;
 	if (le32_to_cpu(missed_beacon->consequtive_missed_beacons) > 5) {
-		IWL_DEBUG_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n",
+		IWL_DEBUG_CALIB(priv, "missed bcn cnsq %d totl %d rcd %d expctd %d\n",
 		    le32_to_cpu(missed_beacon->consequtive_missed_beacons),
 		    le32_to_cpu(missed_beacon->total_missed_becons),
 		    le32_to_cpu(missed_beacon->num_recvd_beacons),
@@ -541,7 +541,7 @@
 	else
 		priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
 
-	IWL_DEBUG_CALIB("inband silence a %u, b %u, c %u, dBm %d\n",
+	IWL_DEBUG_CALIB(priv, "inband silence a %u, b %u, c %u, dBm %d\n",
 			bcn_silence_a, bcn_silence_b, bcn_silence_c,
 			priv->last_rx_noise);
 }
@@ -554,7 +554,7 @@
 	int change;
 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
 
-	IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n",
+	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 		     (int)sizeof(priv->statistics), pkt->len);
 
 	change = ((priv->statistics.general.temperature !=
@@ -741,13 +741,13 @@
 		 * MAC addresses show just the last byte (for brevity),
 		 *    but you can hack it to show more, if you'd like to. */
 		if (dataframe)
-			IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, "
+			IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
 				     "len=%u, rssi=%d, chnl=%d, rate=%u, \n",
 				     title, le16_to_cpu(fc), header->addr1[5],
 				     length, rssi, channel, bitrate);
 		else {
 			/* src/dst addresses assume managed mode */
-			IWL_DEBUG_RX("%s: 0x%04x, dst=0x%02x, src=0x%02x, "
+			IWL_DEBUG_RX(priv, "%s: 0x%04x, dst=0x%02x, src=0x%02x, "
 				     "len=%u, rssi=%d, tim=%lu usec, "
 				     "phy=0x%02x, chnl=%d\n",
 				     title, le16_to_cpu(fc), header->addr1[5],
@@ -785,7 +785,7 @@
 	if (!(fc & IEEE80211_FCTL_PROTECTED))
 		return 0;
 
-	IWL_DEBUG_RX("decrypt_res:0x%x\n", decrypt_res);
+	IWL_DEBUG_RX(priv, "decrypt_res:0x%x\n", decrypt_res);
 	switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
 	case RX_RES_STATUS_SEC_TYPE_TKIP:
 		/* The uCode has got a bad phase 1 Key, pushes the packet.
@@ -799,13 +799,13 @@
 		    RX_RES_STATUS_BAD_ICV_MIC) {
 			/* bad ICV, the packet is destroyed since the
 			 * decryption is inplace, drop it */
-			IWL_DEBUG_RX("Packet destroyed\n");
+			IWL_DEBUG_RX(priv, "Packet destroyed\n");
 			return -1;
 		}
 	case RX_RES_STATUS_SEC_TYPE_CCMP:
 		if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
 		    RX_RES_STATUS_DECRYPT_OK) {
-			IWL_DEBUG_RX("hw decrypt successfully!!!\n");
+			IWL_DEBUG_RX(priv, "hw decrypt successfully!!!\n");
 			stats->flag |= RX_FLAG_DECRYPTED;
 		}
 		break;
@@ -870,7 +870,7 @@
 		break;
 	};
 
-	IWL_DEBUG_RX("decrypt_in:0x%x  decrypt_out = 0x%x\n",
+	IWL_DEBUG_RX(priv, "decrypt_in:0x%x  decrypt_out = 0x%x\n",
 					decrypt_in, decrypt_out);
 
 	return decrypt_out;
@@ -934,8 +934,8 @@
 
 	/* We only process data packets if the interface is open */
 	if (unlikely(!priv->is_open)) {
-		IWL_DEBUG_DROP_LIMIT
-		    ("Dropping packet while interface is not open.\n");
+		IWL_DEBUG_DROP_LIMIT(priv,
+		    "Dropping packet while interface is not open.\n");
 		return;
 	}
 
@@ -1007,7 +1007,7 @@
 	/*rx_status.flag |= RX_FLAG_TSFT;*/
 
 	if ((unlikely(rx_start->cfg_phy_cnt > 20))) {
-		IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n",
+		IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
 				rx_start->cfg_phy_cnt);
 		return;
 	}
@@ -1045,7 +1045,7 @@
 
 	if (!(*rx_end & RX_RES_STATUS_NO_CRC32_ERROR) ||
 	    !(*rx_end & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
-		IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n",
+		IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
 				le32_to_cpu(*rx_end));
 		return;
 	}
@@ -1078,7 +1078,7 @@
 	if (unlikely(priv->debug_level & IWL_DL_RX))
 		iwl_dbg_report_frame(priv, rx_start, len, header, 1);
 #endif
-	IWL_DEBUG_STATS_LIMIT("Rssi %d, noise %d, qual %d, TSF %llu\n",
+	IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n",
 		rx_status.signal, rx_status.noise, rx_status.signal,
 		(unsigned long long)rx_status.mactime);