[BNX2]: Misc. fixes
Some misc. fixes for WoL, 5708 B1, and a typo '=' instead of '=='.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 3486324..60ff9b6 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1171,7 +1171,8 @@
}
if ((CHIP_ID(bp) == CHIP_ID_5708_A0) ||
- (CHIP_ID(bp) == CHIP_ID_5708_B0)) {
+ (CHIP_ID(bp) == CHIP_ID_5708_B0) ||
+ (CHIP_ID(bp) == CHIP_ID_5708_B1)) {
/* increase tx signal amplitude */
bnx2_write_phy(bp, BCM5708S_BLK_ADDR,
BCM5708S_BLK_ADDR_TX_MISC);
@@ -2340,7 +2341,6 @@
val |= BNX2_EMAC_MODE_PORT_MII |
BNX2_EMAC_MODE_MPKT_RCVD |
BNX2_EMAC_MODE_ACPI_RCVD |
- BNX2_EMAC_MODE_FORCE_LINK |
BNX2_EMAC_MODE_MPKT;
REG_WR(bp, BNX2_EMAC_MODE, val);
@@ -2376,7 +2376,8 @@
wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
}
- bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, 0);
+ if (!(bp->flags & NO_WOL_FLAG))
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, 0);
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
if ((CHIP_ID(bp) == CHIP_ID_5706_A0) ||
@@ -3099,7 +3100,7 @@
val |= (0x2 << 20) | (1 << 11);
- if ((bp->flags & PCIX_FLAG) && (bp->bus_speed_mhz = 133))
+ if ((bp->flags & PCIX_FLAG) && (bp->bus_speed_mhz == 133))
val |= (1 << 23);
if ((CHIP_NUM(bp) == CHIP_NUM_5706) &&
@@ -4473,7 +4474,9 @@
bnx2_netif_stop(bp);
del_timer_sync(&bp->timer);
- if (bp->wol)
+ if (bp->flags & NO_WOL_FLAG)
+ reset_code = BNX2_DRV_MSG_CODE_UNLOAD;
+ else if (bp->wol)
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
else
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
@@ -5635,6 +5638,9 @@
}
}
+ if (CHIP_NUM(bp) == CHIP_NUM_5708)
+ bp->flags |= NO_WOL_FLAG;
+
if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
bp->tx_quick_cons_trip_int =
bp->tx_quick_cons_trip;
@@ -5818,7 +5824,9 @@
bnx2_netif_stop(bp);
netif_device_detach(dev);
del_timer_sync(&bp->timer);
- if (bp->wol)
+ if (bp->flags & NO_WOL_FLAG)
+ reset_code = BNX2_DRV_MSG_CODE_UNLOAD;
+ else if (bp->wol)
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
else
reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;