sh: mach-sdk7786: Add support for the FPGA SRAM.
This ties in the 2KiB of FPGA SRAM in to the generic SRAM pool.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index bb2cb27..9c94711 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -156,6 +156,7 @@
select SYS_SUPPORTS_PCI
select NO_IOPORT if !PCI
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select HAVE_SRAM_POOL
help
Select SDK7786 if configuring for a Renesas Technology Europe
SH7786-65nm board.
diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile
index d0f801b..23ff7d4 100644
--- a/arch/sh/boards/mach-sdk7786/Makefile
+++ b/arch/sh/boards/mach-sdk7786/Makefile
@@ -1,3 +1,4 @@
-obj-y := setup.o fpga.o irq.o
+obj-y := fpga.o irq.o setup.o
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
+obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o
diff --git a/arch/sh/boards/mach-sdk7786/sram.c b/arch/sh/boards/mach-sdk7786/sram.c
new file mode 100644
index 0000000..c81c3ab
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/sram.c
@@ -0,0 +1,72 @@
+/*
+ * SDK7786 FPGA SRAM Support.
+ *
+ * Copyright (C) 2010 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <mach/fpga.h>
+#include <asm/sram.h>
+#include <asm/sizes.h>
+
+static int __init fpga_sram_init(void)
+{
+ unsigned long phys;
+ unsigned int area;
+ void __iomem *vaddr;
+ int ret;
+ u16 data;
+
+ /* Enable FPGA SRAM */
+ data = fpga_read_reg(LCLASR);
+ data |= LCLASR_FRAMEN;
+ fpga_write_reg(data, LCLASR);
+
+ /*
+ * FPGA_SEL determines the area mapping
+ */
+ area = (data & LCLASR_FPGA_SEL_MASK) >> LCLASR_FPGA_SEL_SHIFT;
+ if (unlikely(area == LCLASR_AREA_MASK)) {
+ pr_err("FPGA memory unmapped.\n");
+ return -ENXIO;
+ }
+
+ /*
+ * The memory itself occupies a 2KiB range at the top of the area
+ * immediately below the system registers.
+ */
+ phys = (area << 26) + SZ_64M - SZ_4K;
+
+ /*
+ * The FPGA SRAM resides in translatable physical space, so set
+ * up a mapping prior to inserting it in to the pool.
+ */
+ vaddr = ioremap(phys, SZ_2K);
+ if (unlikely(!vaddr)) {
+ pr_err("Failed remapping FPGA memory.\n");
+ return -ENXIO;
+ }
+
+ pr_info("Adding %dKiB of FPGA memory at 0x%08lx-0x%08lx "
+ "(area %d) to pool.\n",
+ SZ_2K >> 10, phys, phys + SZ_2K - 1, area);
+
+ ret = gen_pool_add(sram_pool, (unsigned long)vaddr, SZ_2K, -1);
+ if (unlikely(ret < 0)) {
+ pr_err("Failed adding memory\n");
+ iounmap(vaddr);
+ return ret;
+ }
+
+ return 0;
+}
+postcore_initcall(fpga_sram_init);