drm/i915: make sure eDP PLL is enabled at the right time
We need to make sure the eDP PLL is enabled before the pipes or planes,
so do it as part of the DP prepare mode set function.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index fbe42f0..14c45b1 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1622,32 +1622,6 @@
return 0;
}
-static void ironlake_disable_pll_edp (struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpa_ctl;
-
- DRM_DEBUG_KMS("\n");
- dpa_ctl = I915_READ(DP_A);
- dpa_ctl &= ~DP_PLL_ENABLE;
- I915_WRITE(DP_A, dpa_ctl);
-}
-
-static void ironlake_enable_pll_edp (struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- u32 dpa_ctl;
-
- dpa_ctl = I915_READ(DP_A);
- dpa_ctl |= DP_PLL_ENABLE;
- I915_WRITE(DP_A, dpa_ctl);
- POSTING_READ(DP_A);
- udelay(200);
-}
-
-
static void ironlake_set_pll_edp (struct drm_crtc *crtc, int clock)
{
struct drm_device *dev = crtc->dev;
@@ -1940,10 +1914,7 @@
}
}
- if (HAS_eDP) {
- /* enable eDP PLL */
- ironlake_enable_pll_edp(crtc);
- } else {
+ if (!HAS_eDP) {
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
temp = I915_READ(fdi_rx_reg);
@@ -2242,10 +2213,6 @@
I915_WRITE(pch_dpll_reg, temp & ~DPLL_VCO_ENABLE);
I915_READ(pch_dpll_reg);
- if (HAS_eDP) {
- ironlake_disable_pll_edp(crtc);
- }
-
/* Switch from PCDclk to Rawclk */
temp = I915_READ(fdi_rx_reg);
temp &= ~FDI_SEL_PCDCLK;
@@ -3930,9 +3897,7 @@
dpll_reg = pch_dpll_reg;
}
- if (is_edp) {
- ironlake_disable_pll_edp(crtc);
- } else if ((dpll & DPLL_VCO_ENABLE)) {
+ if (!is_edp) {
I915_WRITE(fp_reg, fp);
I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
I915_READ(dpll_reg);