[ARM] Split ARM MM initialisation for !mmu
Move the MMU specific code from init.c into mmu.c, and add nommu
fixups to nommu.c
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 83145d1..22217fe 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -27,10 +27,7 @@
#include "mm.h"
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-extern void _stext, _text, _etext, __data_start, _end, __init_begin, __init_end;
+extern void _text, _etext, __data_start, _end, __init_begin, __init_end;
extern unsigned long phys_initrd_start;
extern unsigned long phys_initrd_size;
@@ -40,17 +37,6 @@
*/
static struct meminfo meminfo __initdata = { 0, };
-/*
- * empty_zero_page is a special page that is used for
- * zero-initialized data and COW.
- */
-struct page *empty_zero_page;
-
-/*
- * The pmd table for the upper-most set of pages.
- */
-pmd_t *top_pmd;
-
void show_mem(void)
{
int free = 0, total = 0, reserved = 0;
@@ -173,87 +159,9 @@
return initrd_node;
}
-/*
- * Reserve the various regions of node 0
- */
-static __init void reserve_node_zero(pg_data_t *pgdat)
-{
- unsigned long res_size = 0;
-
- /*
- * Register the kernel text and data with bootmem.
- * Note that this can only be in node 0.
- */
-#ifdef CONFIG_XIP_KERNEL
- reserve_bootmem_node(pgdat, __pa(&__data_start), &_end - &__data_start);
-#else
- reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
-#endif
-
- /*
- * Reserve the page tables. These are already in use,
- * and can only be in node 0.
- */
- reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
- PTRS_PER_PGD * sizeof(pgd_t));
-
- /*
- * Hmm... This should go elsewhere, but we really really need to
- * stop things allocating the low memory; ideally we need a better
- * implementation of GFP_DMA which does not assume that DMA-able
- * memory starts at zero.
- */
- if (machine_is_integrator() || machine_is_cintegrator())
- res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
-
- /*
- * These should likewise go elsewhere. They pre-reserve the
- * screen memory region at the start of main system memory.
- */
- if (machine_is_edb7211())
- res_size = 0x00020000;
- if (machine_is_p720t())
- res_size = 0x00014000;
-
-#ifdef CONFIG_SA1111
- /*
- * Because of the SA1111 DMA bug, we want to preserve our
- * precious DMA-able memory...
- */
- res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
-#endif
- if (res_size)
- reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
-}
-
-static inline void prepare_page_table(struct meminfo *mi)
-{
- unsigned long addr;
-
- /*
- * Clear out all the mappings below the kernel image.
- */
- for (addr = 0; addr < MODULE_START; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-
-#ifdef CONFIG_XIP_KERNEL
- /* The XIP kernel is mapped in the module area -- skip over it */
- addr = ((unsigned long)&_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
-#endif
- for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-
- /*
- * Clear out all the kernel space mappings, except for the first
- * memory bank, up to the end of the vmalloc region.
- */
- for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
- addr < VMALLOC_END; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-}
-
static inline void map_memory_bank(struct membank *bank)
{
+#ifdef CONFIG_MMU
struct map_desc map;
map.pfn = __phys_to_pfn(bank->start);
@@ -262,6 +170,7 @@
map.type = MT_MEMORY;
create_mapping(&map);
+#endif
}
static unsigned long __init
@@ -373,7 +282,7 @@
return end_pfn;
}
-static void __init bootmem_init(struct meminfo *mi)
+void __init bootmem_init(struct meminfo *mi)
{
unsigned long memend_pfn = 0;
int node, initrd_node, i;
@@ -387,8 +296,6 @@
memcpy(&meminfo, mi, sizeof(meminfo));
- prepare_page_table(mi);
-
/*
* Locate which node contains the ramdisk image, if any.
*/
@@ -422,114 +329,6 @@
max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
}
-/*
- * Set up device the mappings. Since we clear out the page tables for all
- * mappings above VMALLOC_END, we will remove any debug device mappings.
- * This means you have to be careful how you debug this function, or any
- * called function. This means you can't use any function or debugging
- * method which may touch any device, otherwise the kernel _will_ crash.
- */
-static void __init devicemaps_init(struct machine_desc *mdesc)
-{
- struct map_desc map;
- unsigned long addr;
- void *vectors;
-
- /*
- * Allocate the vector page early.
- */
- vectors = alloc_bootmem_low_pages(PAGE_SIZE);
- BUG_ON(!vectors);
-
- for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
- pmd_clear(pmd_off_k(addr));
-
- /*
- * Map the kernel if it is XIP.
- * It is always first in the modulearea.
- */
-#ifdef CONFIG_XIP_KERNEL
- map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
- map.virtual = MODULE_START;
- map.length = ((unsigned long)&_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
- map.type = MT_ROM;
- create_mapping(&map);
-#endif
-
- /*
- * Map the cache flushing regions.
- */
-#ifdef FLUSH_BASE
- map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
- map.virtual = FLUSH_BASE;
- map.length = SZ_1M;
- map.type = MT_CACHECLEAN;
- create_mapping(&map);
-#endif
-#ifdef FLUSH_BASE_MINICACHE
- map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
- map.virtual = FLUSH_BASE_MINICACHE;
- map.length = SZ_1M;
- map.type = MT_MINICLEAN;
- create_mapping(&map);
-#endif
-
- /*
- * Create a mapping for the machine vectors at the high-vectors
- * location (0xffff0000). If we aren't using high-vectors, also
- * create a mapping at the low-vectors virtual address.
- */
- map.pfn = __phys_to_pfn(virt_to_phys(vectors));
- map.virtual = 0xffff0000;
- map.length = PAGE_SIZE;
- map.type = MT_HIGH_VECTORS;
- create_mapping(&map);
-
- if (!vectors_high()) {
- map.virtual = 0;
- map.type = MT_LOW_VECTORS;
- create_mapping(&map);
- }
-
- /*
- * Ask the machine support to map in the statically mapped devices.
- */
- if (mdesc->map_io)
- mdesc->map_io();
-
- /*
- * Finally flush the caches and tlb to ensure that we're in a
- * consistent state wrt the writebuffer. This also ensures that
- * any write-allocated cache lines in the vector page are written
- * back. After this point, we can start to touch devices again.
- */
- local_flush_tlb_all();
- flush_cache_all();
-}
-
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
-{
- void *zero_page;
-
- build_mem_type_table();
- bootmem_init(mi);
- devicemaps_init(mdesc);
-
- top_pmd = pmd_off_k(0xffff0000);
-
- /*
- * allocate the zero page. Note that we count on this going ok.
- */
- zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
- memzero(zero_page, PAGE_SIZE);
- empty_zero_page = virt_to_page(zero_page);
- flush_dcache_page(empty_zero_page);
-}
-
static inline void free_area(unsigned long addr, unsigned long end, char *s)
{
unsigned int size = (end - addr) >> 10;