ARM: dts: rockchip: remove soc subnodes
Comments received from the rk3288 submission indicated that a generic subnode
to group soc components should not be used.
So to keep all rockchip devicetree files similar, remove it from rk3066 and rk3188.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index afb3273..6131675 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -24,87 +24,85 @@
reg = <0x60000000 0x40000000>;
};
- soc {
- uart0: serial@10124000 {
- status = "okay";
+ uart0: serial@10124000 {
+ status = "okay";
+ };
+
+ uart1: serial@10126000 {
+ status = "okay";
+ };
+
+ uart2: serial@20064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ status = "okay";
+ };
+
+ uart3: serial@20068000 {
+ status = "okay";
+ };
+
+ vcc_sd0: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "sdmmc-supply";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <100000>;
+ };
+
+ dwmmc@10214000 { /* sdmmc */
+ num-slots = <1>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+ vmmc-supply = <&vcc_sd0>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
};
+ };
- uart1: serial@10126000 {
- status = "okay";
+ dwmmc@10218000 { /* wifi */
+ num-slots = <1>;
+ status = "okay";
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ disable-wp;
};
+ };
- uart2: serial@20064000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_xfer>;
- status = "okay";
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ button@0 {
+ gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+ linux,code = <116>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <1>;
+ debounce-interval = <100>;
};
-
- uart3: serial@20068000 {
- status = "okay";
+ button@1 {
+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+ linux,code = <104>;
+ label = "GPIO Key Vol-";
+ linux,input-type = <1>;
+ gpio-key,wakeup = <0>;
+ debounce-interval = <100>;
};
-
- vcc_sd0: fixed-regulator {
- compatible = "regulator-fixed";
- regulator-name = "sdmmc-supply";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
- startup-delay-us = <100000>;
- };
-
- dwmmc@10214000 { /* sdmmc */
- num-slots = <1>;
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
- vmmc-supply = <&vcc_sd0>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
- };
-
- dwmmc@10218000 { /* wifi */
- num-slots = <1>;
- status = "okay";
- non-removable;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- button@0 {
- gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
- linux,code = <116>;
- label = "GPIO Key Power";
- linux,input-type = <1>;
- gpio-key,wakeup = <1>;
- debounce-interval = <100>;
- };
- button@1 {
- gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
- linux,code = <104>;
- label = "GPIO Key Vol-";
- linux,input-type = <1>;
- gpio-key,wakeup = <0>;
- debounce-interval = <100>;
- };
- /* VOL+ comes somehow thru the ADC */
- };
+ /* VOL+ comes somehow thru the ADC */
};
};