[NET] ieee80211 subsystem
Contributors:
Host AP contributors
James Ketrenos <jketreno@linux.intel.com>
Francois Romieu <romieu@fr.zoreil.com>
Adrian Bunk <bunk@stusta.de>
Matthew Galgoci <mgalgoci@parcelfarce.linux.th
eplanet.co.uk>
diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c
new file mode 100644
index 0000000..25a868c
--- /dev/null
+++ b/net/ieee80211/ieee80211_wx.c
@@ -0,0 +1,471 @@
+/******************************************************************************
+
+ Copyright(c) 2004 Intel Corporation. All rights reserved.
+
+ Portions of this file are based on the WEP enablement code provided by the
+ Host AP project hostap-drivers v0.1.3
+ Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ <jkmaline@cc.hut.fi>
+ Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ The full GNU General Public License is included in this distribution in the
+ file called LICENSE.
+
+ Contact Information:
+ James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************/
+#include <linux/wireless.h>
+#include <linux/version.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+
+#include <net/ieee80211.h>
+static const char *ieee80211_modes[] = {
+ "?", "a", "b", "ab", "g", "ag", "bg", "abg"
+};
+
+#define MAX_CUSTOM_LEN 64
+static inline char *ipw2100_translate_scan(struct ieee80211_device *ieee,
+ char *start, char *stop,
+ struct ieee80211_network *network)
+{
+ char custom[MAX_CUSTOM_LEN];
+ char *p;
+ struct iw_event iwe;
+ int i, j;
+ u8 max_rate, rate;
+
+ /* First entry *MUST* be the AP MAC address */
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, network->bssid, ETH_ALEN);
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_ADDR_LEN);
+
+ /* Remaining entries will be displayed in the order we provide them */
+
+ /* Add the ESSID */
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ if (network->flags & NETWORK_EMPTY_ESSID) {
+ iwe.u.data.length = sizeof("<hidden>");
+ start = iwe_stream_add_point(start, stop, &iwe, "<hidden>");
+ } else {
+ iwe.u.data.length = min(network->ssid_len, (u8)32);
+ start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
+ }
+
+ /* Add the protocol name */
+ iwe.cmd = SIOCGIWNAME;
+ snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s", ieee80211_modes[network->mode]);
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_CHAR_LEN);
+
+ /* Add mode */
+ iwe.cmd = SIOCGIWMODE;
+ if (network->capability &
+ (WLAN_CAPABILITY_BSS | WLAN_CAPABILITY_IBSS)) {
+ if (network->capability & WLAN_CAPABILITY_BSS)
+ iwe.u.mode = IW_MODE_MASTER;
+ else
+ iwe.u.mode = IW_MODE_ADHOC;
+
+ start = iwe_stream_add_event(start, stop, &iwe,
+ IW_EV_UINT_LEN);
+ }
+
+ /* Add frequency/channel */
+ iwe.cmd = SIOCGIWFREQ;
+/* iwe.u.freq.m = ieee80211_frequency(network->channel, network->mode);
+ iwe.u.freq.e = 3; */
+ iwe.u.freq.m = network->channel;
+ iwe.u.freq.e = 0;
+ iwe.u.freq.i = 0;
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_FREQ_LEN);
+
+ /* Add encryption capability */
+ iwe.cmd = SIOCGIWENCODE;
+ if (network->capability & WLAN_CAPABILITY_PRIVACY)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
+
+ /* Add basic and extended rates */
+ max_rate = 0;
+ p = custom;
+ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): ");
+ for (i = 0, j = 0; i < network->rates_len; ) {
+ if (j < network->rates_ex_len &&
+ ((network->rates_ex[j] & 0x7F) <
+ (network->rates[i] & 0x7F)))
+ rate = network->rates_ex[j++] & 0x7F;
+ else
+ rate = network->rates[i++] & 0x7F;
+ if (rate > max_rate)
+ max_rate = rate;
+ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
+ "%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
+ }
+ for (; j < network->rates_ex_len; j++) {
+ rate = network->rates_ex[j] & 0x7F;
+ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
+ "%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
+ if (rate > max_rate)
+ max_rate = rate;
+ }
+
+ iwe.cmd = SIOCGIWRATE;
+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+ iwe.u.bitrate.value = max_rate * 500000;
+ start = iwe_stream_add_event(start, stop, &iwe,
+ IW_EV_PARAM_LEN);
+
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = p - custom;
+ if (iwe.u.data.length)
+ start = iwe_stream_add_point(start, stop, &iwe, custom);
+
+ /* Add quality statistics */
+ /* TODO: Fix these values... */
+ iwe.cmd = IWEVQUAL;
+ iwe.u.qual.qual = network->stats.signal;
+ iwe.u.qual.level = network->stats.rssi;
+ iwe.u.qual.noise = network->stats.noise;
+ iwe.u.qual.updated = network->stats.mask & IEEE80211_STATMASK_WEMASK;
+ if (!(network->stats.mask & IEEE80211_STATMASK_RSSI))
+ iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID;
+ if (!(network->stats.mask & IEEE80211_STATMASK_NOISE))
+ iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID;
+ if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL))
+ iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID;
+
+ start = iwe_stream_add_event(start, stop, &iwe, IW_EV_QUAL_LEN);
+
+ iwe.cmd = IWEVCUSTOM;
+ p = custom;
+
+ iwe.u.data.length = p - custom;
+ if (iwe.u.data.length)
+ start = iwe_stream_add_point(start, stop, &iwe, custom);
+
+ if (ieee->wpa_enabled && network->wpa_ie_len){
+ char buf[MAX_WPA_IE_LEN * 2 + 30];
+
+ u8 *p = buf;
+ p += sprintf(p, "wpa_ie=");
+ for (i = 0; i < network->wpa_ie_len; i++) {
+ p += sprintf(p, "%02x", network->wpa_ie[i]);
+ }
+
+ memset(&iwe, 0, sizeof(iwe));
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = strlen(buf);
+ start = iwe_stream_add_point(start, stop, &iwe, buf);
+ }
+
+ if (ieee->wpa_enabled && network->rsn_ie_len){
+ char buf[MAX_WPA_IE_LEN * 2 + 30];
+
+ u8 *p = buf;
+ p += sprintf(p, "rsn_ie=");
+ for (i = 0; i < network->rsn_ie_len; i++) {
+ p += sprintf(p, "%02x", network->rsn_ie[i]);
+ }
+
+ memset(&iwe, 0, sizeof(iwe));
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = strlen(buf);
+ start = iwe_stream_add_point(start, stop, &iwe, buf);
+ }
+
+ /* Add EXTRA: Age to display seconds since last beacon/probe response
+ * for given network. */
+ iwe.cmd = IWEVCUSTOM;
+ p = custom;
+ p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
+ " Last beacon: %lums ago", (jiffies - network->last_scanned) / (HZ / 100));
+ iwe.u.data.length = p - custom;
+ if (iwe.u.data.length)
+ start = iwe_stream_add_point(start, stop, &iwe, custom);
+
+
+ return start;
+}
+
+int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ieee80211_network *network;
+ unsigned long flags;
+
+ char *ev = extra;
+ char *stop = ev + IW_SCAN_MAX_DATA;
+ int i = 0;
+
+ IEEE80211_DEBUG_WX("Getting scan\n");
+
+ spin_lock_irqsave(&ieee->lock, flags);
+
+ list_for_each_entry(network, &ieee->network_list, list) {
+ i++;
+ if (ieee->scan_age == 0 ||
+ time_after(network->last_scanned + ieee->scan_age, jiffies))
+ ev = ipw2100_translate_scan(ieee, ev, stop, network);
+ else
+ IEEE80211_DEBUG_SCAN(
+ "Not showing network '%s ("
+ MAC_FMT ")' due to age (%lums).\n",
+ escape_essid(network->ssid,
+ network->ssid_len),
+ MAC_ARG(network->bssid),
+ (jiffies - network->last_scanned) / (HZ / 100));
+ }
+
+ spin_unlock_irqrestore(&ieee->lock, flags);
+
+ wrqu->data.length = ev - extra;
+ wrqu->data.flags = 0;
+
+ IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
+
+ return 0;
+}
+
+int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *keybuf)
+{
+ struct iw_point *erq = &(wrqu->encoding);
+ struct net_device *dev = ieee->dev;
+ struct ieee80211_security sec = {
+ .flags = 0
+ };
+ int i, key, key_provided, len;
+ struct ieee80211_crypt_data **crypt;
+
+ IEEE80211_DEBUG_WX("SET_ENCODE\n");
+
+ key = erq->flags & IW_ENCODE_INDEX;
+ if (key) {
+ if (key > WEP_KEYS)
+ return -EINVAL;
+ key--;
+ key_provided = 1;
+ } else {
+ key_provided = 0;
+ key = ieee->tx_keyidx;
+ }
+
+ IEEE80211_DEBUG_WX("Key: %d [%s]\n", key, key_provided ?
+ "provided" : "default");
+
+ crypt = &ieee->crypt[key];
+
+ if (erq->flags & IW_ENCODE_DISABLED) {
+ if (key_provided && *crypt) {
+ IEEE80211_DEBUG_WX("Disabling encryption on key %d.\n",
+ key);
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+ } else
+ IEEE80211_DEBUG_WX("Disabling encryption.\n");
+
+ /* Check all the keys to see if any are still configured,
+ * and if no key index was provided, de-init them all */
+ for (i = 0; i < WEP_KEYS; i++) {
+ if (ieee->crypt[i] != NULL) {
+ if (key_provided)
+ break;
+ ieee80211_crypt_delayed_deinit(
+ ieee, &ieee->crypt[i]);
+ }
+ }
+
+ if (i == WEP_KEYS) {
+ sec.enabled = 0;
+ sec.level = SEC_LEVEL_0;
+ sec.flags |= SEC_ENABLED | SEC_LEVEL;
+ }
+
+ goto done;
+ }
+
+
+
+ sec.enabled = 1;
+ sec.flags |= SEC_ENABLED;
+
+ if (*crypt != NULL && (*crypt)->ops != NULL &&
+ strcmp((*crypt)->ops->name, "WEP") != 0) {
+ /* changing to use WEP; deinit previously used algorithm
+ * on this key */
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+ }
+
+ if (*crypt == NULL) {
+ struct ieee80211_crypt_data *new_crypt;
+
+ /* take WEP into use */
+ new_crypt = kmalloc(sizeof(struct ieee80211_crypt_data),
+ GFP_KERNEL);
+ if (new_crypt == NULL)
+ return -ENOMEM;
+ memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
+ new_crypt->ops = ieee80211_get_crypto_ops("WEP");
+ if (!new_crypt->ops) {
+ request_module("ieee80211_crypt_wep");
+ new_crypt->ops = ieee80211_get_crypto_ops("WEP");
+ }
+
+ if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ new_crypt->priv = new_crypt->ops->init(key);
+
+ if (!new_crypt->ops || !new_crypt->priv) {
+ kfree(new_crypt);
+ new_crypt = NULL;
+
+ printk(KERN_WARNING "%s: could not initialize WEP: "
+ "load module ieee80211_crypt_wep\n",
+ dev->name);
+ return -EOPNOTSUPP;
+ }
+ *crypt = new_crypt;
+ }
+
+ /* If a new key was provided, set it up */
+ if (erq->length > 0) {
+ len = erq->length <= 5 ? 5 : 13;
+ memcpy(sec.keys[key], keybuf, erq->length);
+ if (len > erq->length)
+ memset(sec.keys[key] + erq->length, 0,
+ len - erq->length);
+ IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n",
+ key, escape_essid(sec.keys[key], len),
+ erq->length, len);
+ sec.key_sizes[key] = len;
+ (*crypt)->ops->set_key(sec.keys[key], len, NULL,
+ (*crypt)->priv);
+ sec.flags |= (1 << key);
+ /* This ensures a key will be activated if no key is
+ * explicitely set */
+ if (key == sec.active_key)
+ sec.flags |= SEC_ACTIVE_KEY;
+ } else {
+ len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN,
+ NULL, (*crypt)->priv);
+ if (len == 0) {
+ /* Set a default key of all 0 */
+ IEEE80211_DEBUG_WX("Setting key %d to all zero.\n",
+ key);
+ memset(sec.keys[key], 0, 13);
+ (*crypt)->ops->set_key(sec.keys[key], 13, NULL,
+ (*crypt)->priv);
+ sec.key_sizes[key] = 13;
+ sec.flags |= (1 << key);
+ }
+
+ /* No key data - just set the default TX key index */
+ if (key_provided) {
+ IEEE80211_DEBUG_WX(
+ "Setting key %d to default Tx key.\n", key);
+ ieee->tx_keyidx = key;
+ sec.active_key = key;
+ sec.flags |= SEC_ACTIVE_KEY;
+ }
+ }
+
+ done:
+ ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
+ sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
+ sec.flags |= SEC_AUTH_MODE;
+ IEEE80211_DEBUG_WX("Auth: %s\n", sec.auth_mode == WLAN_AUTH_OPEN ?
+ "OPEN" : "SHARED KEY");
+
+ /* For now we just support WEP, so only set that security level...
+ * TODO: When WPA is added this is one place that needs to change */
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
+
+ if (ieee->set_security)
+ ieee->set_security(dev, &sec);
+
+ /* Do not reset port if card is in Managed mode since resetting will
+ * generate new IEEE 802.11 authentication which may end up in looping
+ * with IEEE 802.1X. If your hardware requires a reset after WEP
+ * configuration (for example... Prism2), implement the reset_port in
+ * the callbacks structures used to initialize the 802.11 stack. */
+ if (ieee->reset_on_keychange &&
+ ieee->iw_mode != IW_MODE_INFRA &&
+ ieee->reset_port && ieee->reset_port(dev)) {
+ printk(KERN_DEBUG "%s: reset_port failed\n", dev->name);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *keybuf)
+{
+ struct iw_point *erq = &(wrqu->encoding);
+ int len, key;
+ struct ieee80211_crypt_data *crypt;
+
+ IEEE80211_DEBUG_WX("GET_ENCODE\n");
+
+ key = erq->flags & IW_ENCODE_INDEX;
+ if (key) {
+ if (key > WEP_KEYS)
+ return -EINVAL;
+ key--;
+ } else
+ key = ieee->tx_keyidx;
+
+ crypt = ieee->crypt[key];
+ erq->flags = key + 1;
+
+ if (crypt == NULL || crypt->ops == NULL) {
+ erq->length = 0;
+ erq->flags |= IW_ENCODE_DISABLED;
+ return 0;
+ }
+
+ if (strcmp(crypt->ops->name, "WEP") != 0) {
+ /* only WEP is supported with wireless extensions, so just
+ * report that encryption is used */
+ erq->length = 0;
+ erq->flags |= IW_ENCODE_ENABLED;
+ return 0;
+ }
+
+ len = crypt->ops->get_key(keybuf, WEP_KEY_LEN, NULL, crypt->priv);
+ erq->length = (len >= 0 ? len : 0);
+
+ erq->flags |= IW_ENCODE_ENABLED;
+
+ if (ieee->open_wep)
+ erq->flags |= IW_ENCODE_OPEN;
+ else
+ erq->flags |= IW_ENCODE_RESTRICTED;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(ieee80211_wx_get_scan);
+EXPORT_SYMBOL(ieee80211_wx_set_encode);
+EXPORT_SYMBOL(ieee80211_wx_get_encode);