docs: hwmon: convert remaining files to ReST format
Convert all other hwmon files to ReST format, in order to allow
them to be parsed by Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
diff --git a/Documentation/hwmon/w83l786ng b/Documentation/hwmon/w83l786ng
index d8f55d7..2b77761 100644
--- a/Documentation/hwmon/w83l786ng
+++ b/Documentation/hwmon/w83l786ng
@@ -1,10 +1,14 @@
Kernel driver w83l786ng
-=====================
+=======================
Supported chips:
+
* Winbond W83L786NG/W83L786NR
+
Prefix: 'w83l786ng'
+
Addresses scanned: I2C 0x2e - 0x2f
+
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L786NRNG09.pdf
Author: Kevin Lo <kevlo@kevlo.org>
@@ -14,9 +18,10 @@
-----------------
* reset boolean
- (default 0)
- Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
- behavior is no chip reset to preserve BIOS settings
+ (default 0)
+
+ Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
+ behavior is no chip reset to preserve BIOS settings
Description
@@ -41,14 +46,21 @@
/sys files
----------
-pwm[1-2] - this file stores PWM duty cycle or DC value (fan speed) in range:
- 0 (stop) to 255 (full)
-pwm[1-2]_enable - this file controls mode of fan/temperature control:
- * 0 Manual Mode
- * 1 Thermal Cruise
- * 2 Smart Fan II
- * 4 FAN_SET
-pwm[1-2]_mode - Select PWM of DC mode
- * 0 DC
- * 1 PWM
-tolerance[1-2] - Value in degrees of Celsius (degC) for +- T
+pwm[1-2]
+ - this file stores PWM duty cycle or DC value (fan speed) in range:
+
+ 0 (stop) to 255 (full)
+pwm[1-2]_enable
+ - this file controls mode of fan/temperature control:
+
+ * 0 Manual Mode
+ * 1 Thermal Cruise
+ * 2 Smart Fan II
+ * 4 FAN_SET
+pwm[1-2]_mode
+ - Select PWM of DC mode
+
+ * 0 DC
+ * 1 PWM
+tolerance[1-2]
+ - Value in degrees of Celsius (degC) for +- T