drm/i915: Get rid of unused transitional members.
The previous commit converted hw readout to atomic, all the new_*
members were used for restoring the old state, but with the
conversion of suspend to atomic there's no use left for them.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b7f17e8..bb9edd0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10247,7 +10247,7 @@
retry:
ret = drm_modeset_lock(&config->connection_mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
/*
* Algorithm gets a little messy:
@@ -10265,10 +10265,10 @@
ret = drm_modeset_lock(&crtc->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
old->dpms_mode = connector->dpms;
old->load_detect_temp = false;
@@ -10287,9 +10287,6 @@
continue;
if (possible_crtc->state->enable)
continue;
- /* This can occur when applying the pipe A quirk on resume. */
- if (to_intel_crtc(possible_crtc)->new_enabled)
- continue;
crtc = possible_crtc;
break;
@@ -10300,20 +10297,17 @@
*/
if (!crtc) {
DRM_DEBUG_KMS("no pipe available for load-detect\n");
- goto fail_unlock;
+ goto fail;
}
ret = drm_modeset_lock(&crtc->mutex, ctx);
if (ret)
- goto fail_unlock;
+ goto fail;
ret = drm_modeset_lock(&crtc->primary->mutex, ctx);
if (ret)
- goto fail_unlock;
- intel_encoder->new_crtc = to_intel_crtc(crtc);
- to_intel_connector(connector)->new_encoder = intel_encoder;
+ goto fail;
intel_crtc = to_intel_crtc(crtc);
- intel_crtc->new_enabled = true;
old->dpms_mode = connector->dpms;
old->load_detect_temp = true;
old->release_fb = NULL;
@@ -10381,9 +10375,7 @@
intel_wait_for_vblank(dev, intel_crtc->pipe);
return true;
- fail:
- intel_crtc->new_enabled = crtc->state->enable;
-fail_unlock:
+fail:
drm_atomic_state_free(state);
state = NULL;
@@ -10429,10 +10421,6 @@
if (IS_ERR(crtc_state))
goto fail;
- to_intel_connector(connector)->new_encoder = NULL;
- intel_encoder->new_crtc = NULL;
- intel_crtc->new_enabled = false;
-
connector_state->best_encoder = NULL;
connector_state->crtc = NULL;
@@ -11836,37 +11824,6 @@
.atomic_check = intel_crtc_atomic_check,
};
-/**
- * intel_modeset_update_staged_output_state
- *
- * Updates the staged output configuration state, e.g. after we've read out the
- * current hw state.
- */
-static void intel_modeset_update_staged_output_state(struct drm_device *dev)
-{
- struct intel_crtc *crtc;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
-
- for_each_intel_connector(dev, connector) {
- connector->new_encoder =
- to_intel_encoder(connector->base.encoder);
- }
-
- for_each_intel_encoder(dev, encoder) {
- encoder->new_crtc =
- to_intel_crtc(encoder->base.crtc);
- }
-
- for_each_intel_crtc(dev, crtc) {
- crtc->new_enabled = crtc->base.state->enable;
- }
-}
-
-/* Transitional helper to copy current connector/encoder state to
- * connector->state. This is needed so that code that is partially
- * converted to atomic does the right thing.
- */
static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
{
struct intel_connector *connector;
@@ -12307,7 +12264,6 @@
}
drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
- intel_modeset_update_staged_output_state(state->dev);
/* Double check state. */
for_each_crtc_in_state(state, crtc, crtc_state, i) {
@@ -12707,11 +12663,14 @@
struct intel_connector *connector;
for_each_intel_connector(dev, connector) {
+ struct drm_encoder *encoder = connector->base.encoder;
+ struct drm_connector_state *state = connector->base.state;
+
/* This also checks the encoder/connector hw state with the
* ->get_hw_state callbacks. */
intel_connector_check_state(connector);
- I915_STATE_WARN(&connector->new_encoder->base != connector->base.encoder,
+ I915_STATE_WARN(state->best_encoder != encoder,
"connector's staged encoder doesn't match current encoder\n");
}
}
@@ -12731,8 +12690,6 @@
encoder->base.base.id,
encoder->base.name);
- I915_STATE_WARN(&encoder->new_crtc->base != encoder->base.crtc,
- "encoder's stage crtc doesn't match current crtc\n");
I915_STATE_WARN(encoder->connectors_active && !encoder->base.crtc,
"encoder's active_connectors set, but no crtc\n");
@@ -12742,6 +12699,10 @@
enabled = true;
if (connector->base.dpms != DRM_MODE_DPMS_OFF)
active = true;
+
+ I915_STATE_WARN(connector->base.state->crtc !=
+ encoder->base.crtc,
+ "connector's crtc doesn't match encoder crtc\n");
}
/*
* for MST connectors if we unplug the connector is gone
@@ -13312,11 +13273,12 @@
* need to copy the staged config to the atomic state, otherwise the
* mode set will just reapply the state the HW is already in. */
for_each_intel_encoder(dev, encoder) {
- if (&encoder->new_crtc->base != crtc)
+ if (encoder->base.crtc != crtc)
continue;
for_each_intel_connector(dev, connector) {
- if (connector->new_encoder != encoder)
+ if (connector->base.state->best_encoder !=
+ &encoder->base)
continue;
connector_state = drm_atomic_get_connector_state(state, &connector->base);
@@ -13329,7 +13291,6 @@
}
connector_state->crtc = crtc;
- connector_state->best_encoder = &encoder->base;
}
}
@@ -13341,9 +13302,6 @@
return;
}
- crtc_state->base.active = crtc_state->base.enable =
- to_intel_crtc(crtc)->new_enabled;
-
drm_mode_copy(&crtc_state->base.mode, &crtc->mode);
intel_modeset_setup_plane_state(state, crtc, &crtc->mode,
@@ -15601,8 +15559,6 @@
skl_wm_get_hw_state(dev);
else if (HAS_PCH_SPLIT(dev))
ilk_wm_get_hw_state(dev);
-
- intel_modeset_update_staged_output_state(dev);
}
void intel_display_resume(struct drm_device *dev)