staging: fbtft: Use standard MIPI DCS command defines for fbtft driver
This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index 6824d5f..3bcbabf 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -35,6 +35,7 @@
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <video/mipi_display.h>
#include "fbtft.h"
#include "internal.h"
@@ -319,16 +320,13 @@
static void fbtft_set_addr_win(struct fbtft_par *par, int xs, int ys, int xe,
int ye)
{
- /* Column address set */
- write_reg(par, 0x2A,
- (xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF);
+ write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+ (xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF);
- /* Row address set */
- write_reg(par, 0x2B,
- (ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF);
+ write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+ (ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF);
- /* Memory write */
- write_reg(par, 0x2C);
+ write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
}
static void fbtft_reset(struct fbtft_par *par)
diff --git a/drivers/staging/fbtft/fbtft_device.c b/drivers/staging/fbtft/fbtft_device.c
index 071f79b..a0366e5 100644
--- a/drivers/staging/fbtft/fbtft_device.c
+++ b/drivers/staging/fbtft/fbtft_device.c
@@ -212,38 +212,63 @@
"0F 00 1 7 4 0 0 0 6 7"
static int pitft_init_sequence[] = {
- -1, 0x01, -2, 5, -1, 0x28, -1, 0xEF,
- 0x03, 0x80, 0x02, -1, 0xCF, 0x00, 0xC1, 0x30,
+ -1, MIPI_DCS_SOFT_RESET,
+ -2, 5,
+ -1, MIPI_DCS_SET_DISPLAY_OFF,
+ -1, 0xEF, 0x03, 0x80, 0x02,
+ -1, 0xCF, 0x00, 0xC1, 0x30,
-1, 0xED, 0x64, 0x03, 0x12, 0x81,
-1, 0xE8, 0x85, 0x00, 0x78,
-1, 0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02,
- -1, 0xF7, 0x20, -1, 0xEA, 0x00, 0x00,
- -1, 0xC0, 0x23, -1, 0xC1, 0x10, -1, 0xC5,
- 0x3e, 0x28, -1, 0xC7, 0x86, -1, 0x3A, 0x55,
- -1, 0xB1, 0x00, 0x18, -1, 0xB6, 0x08, 0x82,
- 0x27, -1, 0xF2, 0x00, -1, 0x26, 0x01,
- -1, 0xE0, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08,
- 0x4E, 0xF1, 0x37, 0x07, 0x10, 0x03,
- 0x0E, 0x09, 0x00, -1, 0xE1, 0x00, 0x0E, 0x14,
- 0x03, 0x11, 0x07, 0x31, 0xC1, 0x48,
- 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F, -1,
- 0x11, -2, 100, -1, 0x29, -2, 20, -3 };
+ -1, 0xF7, 0x20,
+ -1, 0xEA, 0x00, 0x00,
+ -1, 0xC0, 0x23,
+ -1, 0xC1, 0x10,
+ -1, 0xC5, 0x3E, 0x28,
+ -1, 0xC7, 0x86,
+ -1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
+ -1, 0xB1, 0x00, 0x18,
+ -1, 0xB6, 0x08, 0x82, 0x27,
+ -1, 0xF2, 0x00,
+ -1, MIPI_DCS_SET_GAMMA_CURVE, 0x01,
+ -1, 0xE0, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E,
+ 0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
+ -1, 0xE1, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31,
+ 0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
+ -1, MIPI_DCS_EXIT_SLEEP_MODE,
+ -2, 100,
+ -1, MIPI_DCS_SET_DISPLAY_ON,
+ -2, 20,
+ -3
+};
static int waveshare32b_init_sequence[] = {
-1, 0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02,
-1, 0xCF, 0x00, 0xC1, 0x30,
- -1, 0xE8, 0x85, 0x00, 0x78, -1, 0xEA, 0x00,
- 0x00, -1, 0xED, 0x64, 0x03, 0x12, 0x81,
- -1, 0xF7, 0x20, -1, 0xC0, 0x23, -1, 0xC1,
- 0x10, -1, 0xC5, 0x3e, 0x28, -1, 0xC7, 0x86,
- -1, 0x36, 0x28, -1, 0x3A, 0x55, -1, 0xB1, 0x00,
- 0x18, -1, 0xB6, 0x08, 0x82, 0x27,
- -1, 0xF2, 0x00, -1, 0x26, 0x01,
+ -1, 0xE8, 0x85, 0x00, 0x78,
+ -1, 0xEA, 0x00, 0x00,
+ -1, 0xED, 0x64, 0x03, 0x12, 0x81,
+ -1, 0xF7, 0x20,
+ -1, 0xC0, 0x23,
+ -1, 0xC1, 0x10,
+ -1, 0xC5, 0x3E, 0x28,
+ -1, 0xC7, 0x86,
+ -1, MIPI_DCS_SET_ADDRESS_MODE, 0x28,
+ -1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
+ -1, 0xB1, 0x00, 0x18,
+ -1, 0xB6, 0x08, 0x82, 0x27,
+ -1, 0xF2, 0x00,
+ -1, MIPI_DCS_SET_GAMMA_CURVE, 0x01,
-1, 0xE0, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E,
- 0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
+ 0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
-1, 0xE1, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31,
- 0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
- -1, 0x11, -2, 120, -1, 0x29, -1, 0x2c, -3 };
+ 0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
+ -1, MIPI_DCS_EXIT_SLEEP_MODE,
+ -2, 120,
+ -1, MIPI_DCS_SET_DISPLAY_ON,
+ -1, MIPI_DCS_WRITE_MEMORY_START,
+ -3
+};
/* Supported displays in alphabetical order */
static struct fbtft_device_display displays[] = {