staging: nvec: Fix alignment with the open parenthesis
Alignment should match open parenthesis. Checkpatch detected these
issues.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c
index bdea8fa..c335ae2 100644
--- a/drivers/staging/nvec/nvec.c
+++ b/drivers/staging/nvec/nvec.c
@@ -148,7 +148,7 @@
dev_warn(nvec->dev, "unhandled msg type %ld\n", event_type);
print_hex_dump(KERN_WARNING, "payload: ", DUMP_PREFIX_NONE, 16, 1,
- msg, msg[1] + 2, true);
+ msg, msg[1] + 2, true);
return NOTIFY_OK;
}
@@ -257,7 +257,7 @@
* occurred, the nvec driver may print an error.
*/
int nvec_write_async(struct nvec_chip *nvec, const unsigned char *data,
- short size)
+ short size)
{
struct nvec_msg *msg;
unsigned long flags;
@@ -313,10 +313,11 @@
}
dev_dbg(nvec->dev, "nvec_sync_write: 0x%04x\n",
- nvec->sync_write_pending);
+ nvec->sync_write_pending);
if (!(wait_for_completion_timeout(&nvec->sync_write,
- msecs_to_jiffies(2000)))) {
- dev_warn(nvec->dev, "timeout waiting for sync write to complete\n");
+ msecs_to_jiffies(2000)))) {
+ dev_warn(nvec->dev,
+ "timeout waiting for sync write to complete\n");
mutex_unlock(&nvec->sync_write_mutex);
return -ETIMEDOUT;
}
@@ -422,8 +423,8 @@
if ((msg->data[0] >> 7) == 1 && (msg->data[0] & 0x0f) == 5)
print_hex_dump(KERN_WARNING, "ec system event ",
- DUMP_PREFIX_NONE, 16, 1, msg->data,
- msg->data[1] + 2, true);
+ DUMP_PREFIX_NONE, 16, 1, msg->data,
+ msg->data[1] + 2, true);
atomic_notifier_call_chain(&nvec->notifier_list, msg->data[0] & 0x8f,
msg->data);
@@ -493,8 +494,8 @@
{
if (nvec->rx->pos != nvec_msg_size(nvec->rx)) {
dev_err(nvec->dev, "RX incomplete: Expected %u bytes, got %u\n",
- (uint) nvec_msg_size(nvec->rx),
- (uint) nvec->rx->pos);
+ (uint)nvec_msg_size(nvec->rx),
+ (uint)nvec->rx->pos);
nvec_msg_free(nvec, nvec->rx);
nvec->state = 0;
@@ -688,8 +689,8 @@
if ((status & (RCVD | RNW)) == RCVD) {
if (received != nvec->i2c_addr)
dev_err(nvec->dev,
- "received address 0x%02x, expected 0x%02x\n",
- received, nvec->i2c_addr);
+ "received address 0x%02x, expected 0x%02x\n",
+ received, nvec->i2c_addr);
nvec->state = 1;
}
@@ -778,7 +779,7 @@
}
if (of_property_read_u32(nvec->dev->of_node, "slave-addr",
- &nvec->i2c_addr)) {
+ &nvec->i2c_addr)) {
dev_err(nvec->dev, "no i2c address specified");
return -ENODEV;
}
@@ -854,14 +855,14 @@
INIT_WORK(&nvec->tx_work, nvec_request_master);
err = devm_gpio_request_one(&pdev->dev, nvec->gpio, GPIOF_OUT_INIT_HIGH,
- "nvec gpio");
+ "nvec gpio");
if (err < 0) {
dev_err(nvec->dev, "couldn't request gpio\n");
return -ENODEV;
}
err = devm_request_irq(&pdev->dev, nvec->irq, nvec_interrupt, 0,
- "nvec", nvec);
+ "nvec", nvec);
if (err) {
dev_err(nvec->dev, "couldn't request irq\n");
return -ENODEV;
@@ -883,8 +884,10 @@
err = nvec_write_sync(nvec, get_firmware_version, 2, &msg);
if (!err) {
- dev_warn(nvec->dev, "ec firmware version %02x.%02x.%02x / %02x\n",
- msg->data[4], msg->data[5], msg->data[6], msg->data[7]);
+ dev_warn(nvec->dev,
+ "ec firmware version %02x.%02x.%02x / %02x\n",
+ msg->data[4], msg->data[5],
+ msg->data[6], msg->data[7]);
nvec_msg_free(nvec, msg);
}