diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index aded7b1..01e450b 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -199,6 +199,7 @@
 	 */
 #define rem t8
 
+	R10KCBARRIER(0(ra))
 	/*
 	 * The "issue break"s below are very approximate.
 	 * Issue delays for dcache fills will perturb the schedule, as will
@@ -231,6 +232,7 @@
 	PREF(	1, 3*32(dst) )
 	.align	4
 1:
+	R10KCBARRIER(0(ra))
 EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
 EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
 EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
@@ -272,6 +274,7 @@
 EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
 	SUB	len, len, 4*NBYTES
 	ADD	src, src, 4*NBYTES
+	R10KCBARRIER(0(ra))
 EXC(	STORE	t0, UNIT(0)(dst),	s_exc_p4u)
 EXC(	STORE	t1, UNIT(1)(dst),	s_exc_p3u)
 EXC(	STORE	t2, UNIT(2)(dst),	s_exc_p2u)
@@ -287,6 +290,7 @@
 	beq	rem, len, copy_bytes
 	 nop
 1:
+	R10KCBARRIER(0(ra))
 EXC(	LOAD	t0, 0(src),		l_exc)
 	ADD	src, src, NBYTES
 	SUB	len, len, NBYTES
@@ -334,6 +338,7 @@
 EXC(	LDREST	t3, REST(0)(src),	l_exc_copy)
 	SUB	t2, t2, t1	# t2 = number of bytes copied
 	xor	match, t0, t1
+	R10KCBARRIER(0(ra))
 EXC(	STFIRST t3, FIRST(0)(dst),	s_exc)
 	beq	len, t2, done
 	 SUB	len, len, t2
@@ -354,6 +359,7 @@
  * It's OK to load FIRST(N+1) before REST(N) because the two addresses
  * are to the same unit (unless src is aligned, but it's not).
  */
+	R10KCBARRIER(0(ra))
 EXC(	LDFIRST	t0, FIRST(0)(src),	l_exc)
 EXC(	LDFIRST	t1, FIRST(1)(src),	l_exc_copy)
 	SUB     len, len, 4*NBYTES
@@ -384,6 +390,7 @@
 	beq	rem, len, copy_bytes
 	 nop
 1:
+	R10KCBARRIER(0(ra))
 EXC(	LDFIRST t0, FIRST(0)(src),	l_exc)
 EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
 	ADD	src, src, NBYTES
@@ -399,6 +406,7 @@
 	 nop
 copy_bytes:
 	/* 0 < len < NBYTES  */
+	R10KCBARRIER(0(ra))
 #define COPY_BYTE(N)			\
 EXC(	lb	t0, N(src), l_exc);	\
 	SUB	len, len, 1;		\
@@ -528,6 +536,7 @@
 	ADD	a1, a2				# src = src + len
 
 r_end_bytes:
+	R10KCBARRIER(0(ra))
 	lb	t0, -1(a1)
 	SUB	a2, a2, 0x1
 	sb	t0, -1(a0)
@@ -542,6 +551,7 @@
 	 move	a2, zero
 
 r_end_bytes_up:
+	R10KCBARRIER(0(ra))
 	lb	t0, (a1)
 	SUB	a2, a2, 0x1
 	sb	t0, (a0)
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
index 3bf3842..c018a47 100644
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -86,6 +86,7 @@
 	.set		at
 #endif
 
+	R10KCBARRIER(0(ra))
 #ifdef __MIPSEB__
 	EX(LONG_S_L, a1, (a0), first_fixup)	/* make word/dword aligned */
 #endif
@@ -103,11 +104,13 @@
 	PTR_ADDU	t1, a0			/* end address */
 	.set		reorder
 1:	PTR_ADDIU	a0, 64
+	R10KCBARRIER(0(ra))
 	f_fill64 a0, -64, a1, fwd_fixup
 	bne		t1, a0, 1b
 	.set		noreorder
 
 memset_partial:
+	R10KCBARRIER(0(ra))
 	PTR_LA		t1, 2f			/* where to start */
 #if LONGSIZE == 4
 	PTR_SUBU	t1, t0
@@ -129,6 +132,7 @@
 
 	beqz		a2, 1f
 	 PTR_ADDU	a0, a2			/* What's left */
+	R10KCBARRIER(0(ra))
 #ifdef __MIPSEB__
 	EX(LONG_S_R, a1, -1(a0), last_fixup)
 #endif
@@ -143,6 +147,7 @@
 	 PTR_ADDU	t1, a0, a2
 
 1:	PTR_ADDIU	a0, 1			/* fill bytewise */
+	R10KCBARRIER(0(ra))
 	bne		t1, a0, 1b
 	 sb		a1, -1(a0)
 
diff --git a/arch/mips/lib/strncpy_user.S b/arch/mips/lib/strncpy_user.S
index 5c8fb9d..8a63f72 100644
--- a/arch/mips/lib/strncpy_user.S
+++ b/arch/mips/lib/strncpy_user.S
@@ -38,6 +38,7 @@
 	.set		noreorder
 1:	EX(lbu, t0, (v1), fault)
 	PTR_ADDIU	v1, 1
+	R10KCBARRIER(0(ra))
 	beqz		t0, 2f
 	 sb		t0, (a0)
 	PTR_ADDIU	v0, 1