ipg: fix checkpatch reported errors
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Sorbica Shieh <sorbica@icplus.com.tw>
Cc: Jesse Huang <jesse@icplus.com.tw>
diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index 8b10d63..cda5388 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -51,7 +51,7 @@
/* I/O register offsets. */
enum ipg_regs {
DMA_CTRL = 0x00,
- RX_DMA_STATUS = 0x08, // Unused + reserved
+ RX_DMA_STATUS = 0x08, /* Unused + reserved */
TFD_LIST_PTR_0 = 0x10,
TFD_LIST_PTR_1 = 0x14,
TX_DMA_BURST_THRESH = 0x18,
@@ -64,21 +64,21 @@
RX_DMA_POLL_PERIOD = 0x26,
DEBUG_CTRL = 0x2c,
ASIC_CTRL = 0x30,
- FIFO_CTRL = 0x38, // Unused
+ FIFO_CTRL = 0x38, /* Unused */
FLOW_OFF_THRESH = 0x3c,
FLOW_ON_THRESH = 0x3e,
EEPROM_DATA = 0x48,
EEPROM_CTRL = 0x4a,
- EXPROM_ADDR = 0x4c, // Unused
- EXPROM_DATA = 0x50, // Unused
- WAKE_EVENT = 0x51, // Unused
- COUNTDOWN = 0x54, // Unused
+ EXPROM_ADDR = 0x4c, /* Unused */
+ EXPROM_DATA = 0x50, /* Unused */
+ WAKE_EVENT = 0x51, /* Unused */
+ COUNTDOWN = 0x54, /* Unused */
INT_STATUS_ACK = 0x5a,
INT_ENABLE = 0x5c,
- INT_STATUS = 0x5e, // Unused
+ INT_STATUS = 0x5e, /* Unused */
TX_STATUS = 0x60,
MAC_CTRL = 0x6c,
- VLAN_TAG = 0x70, // Unused
+ VLAN_TAG = 0x70, /* Unused */
PHY_SET = 0x75,
PHY_CTRL = 0x76,
STATION_ADDRESS_0 = 0x78,
@@ -90,11 +90,11 @@
HASHTABLE_1 = 0x90,
RMON_STATISTICS_MASK = 0x98,
STATISTICS_MASK = 0x9c,
- RX_JUMBO_FRAMES = 0xbc, // Unused
- TCP_CHECKSUM_ERRORS = 0xc0, // Unused
- IP_CHECKSUM_ERRORS = 0xc2, // Unused
- UDP_CHECKSUM_ERRORS = 0xc4, // Unused
- TX_JUMBO_FRAMES = 0xf4 // Unused
+ RX_JUMBO_FRAMES = 0xbc, /* Unused */
+ TCP_CHECKSUM_ERRORS = 0xc0, /* Unused */
+ IP_CHECKSUM_ERRORS = 0xc2, /* Unused */
+ UDP_CHECKSUM_ERRORS = 0xc4, /* Unused */
+ TX_JUMBO_FRAMES = 0xf4 /* Unused */
};
/* Ethernet MIB statistic register offsets. */
@@ -590,7 +590,7 @@
* Define larger if expecting jumbo frames.
*/
#ifdef JUMBO_FRAME
-//IPG_TXFRAG_SIZE must <= 0x2b00, or TX will crash
+/* IPG_TXFRAG_SIZE must <= 0x2b00, or TX will crash */
#define IPG_TXFRAG_SIZE JUMBO_FRAME_SIZE
#endif
@@ -598,7 +598,7 @@
* Define larger if expecting jumbo frames.
*/
#ifdef JUMBO_FRAME
-//4088=4096-8
+/* 4088 = 4096 - 8 */
#define IPG_RXFRAG_SIZE __IPG_RXFRAG_SIZE
#define IPG_RXSUPPORT_SIZE IPG_MAX_RXFRAME_SIZE
#else
@@ -628,7 +628,7 @@
/* specify the jumbo frame maximum size
* per unit is 0x600 (the rx_buffer size that one RFD can carry)
*/
-#define MAX_JUMBOSIZE 0x8 // max is 12K
+#define MAX_JUMBOSIZE 0x8 /* max is 12K */
/* Key register values loaded at driver start up. */