[ARM] Dove: add support for CM-A510 machine.
This patch adds support for CM-A510 machine
Signed-off-by: Konstantin Sinyuk <kostyas@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Reviewed-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
new file mode 100644
index 0000000..96e0e94
--- /dev/null
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -0,0 +1,95 @@
+/*
+ * arch/arm/mach-dove/cm-a510.c
+ *
+ * Copyright (C) 2010 CompuLab, Ltd.
+ * Konstantin Sinyuk <kostyas@compulab.co.il>
+ *
+ * Based on Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/dove.h>
+
+#include "common.h"
+
+static struct mv643xx_eth_platform_data cm_a510_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data cm_a510_sata_data = {
+ .n_ports = 1,
+};
+
+/*
+ * SPI Devices:
+ * SPI0: 1M Flash Winbond w25q32bv
+ */
+static const struct flash_platform_data cm_a510_spi_flash_data = {
+ .type = "w25q32bv",
+};
+
+static struct spi_board_info __initdata cm_a510_spi_flash_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &cm_a510_spi_flash_data,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static int __init cm_a510_pci_init(void)
+{
+ if (machine_is_cm_a510())
+ dove_pcie_init(1, 1);
+
+ return 0;
+}
+
+subsys_initcall(cm_a510_pci_init);
+
+/* Board Init */
+static void __init cm_a510_init(void)
+{
+ /*
+ * Basic Dove setup. Needs to be called early.
+ */
+ dove_init();
+
+ dove_ge00_init(&cm_a510_ge00_data);
+ dove_ehci0_init();
+ dove_ehci1_init();
+ dove_sata_init(&cm_a510_sata_data);
+ dove_sdio0_init();
+ dove_sdio1_init();
+ dove_spi0_init();
+ dove_spi1_init();
+ dove_uart0_init();
+ dove_uart1_init();
+ dove_i2c_init();
+ spi_register_board_info(cm_a510_spi_flash_info,
+ ARRAY_SIZE(cm_a510_spi_flash_info));
+}
+
+MACHINE_START(CM_A510, "Compulab CM-A510 Board")
+ .boot_params = 0x00000100,
+ .init_machine = cm_a510_init,
+ .map_io = dove_map_io,
+ .init_irq = dove_init_irq,
+ .timer = &dove_timer,
+MACHINE_END