b43legacy: Convert to use of the new SPROM structure
The b43legacy driver is modified to use the new SPROM structure.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c
index d121fae..9d527e6 100644
--- a/drivers/net/wireless/b43legacy/phy.c
+++ b/drivers/net/wireless/b43legacy/phy.c
@@ -441,7 +441,7 @@
might_sleep();
b43legacy_phy_setupg(dev);
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_PACTRL)
+ if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_PACTRL)
b43legacy_phy_write(dev, 0x046E, 0x03CF);
}
@@ -543,7 +543,7 @@
if (phy->radio_ver == 0x2050)
b43legacy_phy_write(dev, 0x002A, 0x88C2);
b43legacy_radio_set_txpower_bg(dev, 0xFFFF, 0xFFFF, 0xFFFF);
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_RSSI) {
+ if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_RSSI) {
b43legacy_calc_nrssi_slope(dev);
b43legacy_calc_nrssi_threshold(dev);
}
@@ -699,7 +699,7 @@
b43legacy_radio_write16(dev, 0x005A, 0x0088);
b43legacy_radio_write16(dev, 0x005B, 0x006B);
b43legacy_radio_write16(dev, 0x005C, 0x000F);
- if (dev->dev->bus->sprom.r1.boardflags_lo & 0x8000) {
+ if (dev->dev->bus->sprom.boardflags_lo & 0x8000) {
b43legacy_radio_write16(dev, 0x005D, 0x00FA);
b43legacy_radio_write16(dev, 0x005E, 0x00D8);
} else {
@@ -797,7 +797,7 @@
b43legacy_phy_write(dev, 0x0062, 0x0007);
b43legacy_radio_init2050(dev);
b43legacy_phy_lo_g_measure(dev);
- if (dev->dev->bus->sprom.r1.boardflags_lo &
+ if (dev->dev->bus->sprom.boardflags_lo &
B43legacy_BFL_RSSI) {
b43legacy_calc_nrssi_slope(dev);
b43legacy_calc_nrssi_threshold(dev);
@@ -921,7 +921,7 @@
b43legacy_phy_read(dev, 0x0811) | 0x0100);
b43legacy_phy_write(dev, 0x0812,
b43legacy_phy_read(dev, 0x0812) & 0xCFFF);
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_EXTLNA) {
+ if (dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_EXTLNA) {
if (phy->rev >= 7) {
b43legacy_phy_write(dev, 0x0811,
b43legacy_phy_read(dev, 0x0811)
@@ -1072,7 +1072,7 @@
b43legacy_phy_write(dev, 0x0036,
(b43legacy_phy_read(dev, 0x0036)
& 0x0FFF) | (phy->txctl2 << 12));
- if (dev->dev->bus->sprom.r1.boardflags_lo &
+ if (dev->dev->bus->sprom.boardflags_lo &
B43legacy_BFL_PACTRL)
b43legacy_phy_write(dev, 0x002E, 0x8075);
else
@@ -1087,7 +1087,7 @@
b43legacy_phy_write(dev, 0x080F, 0x8078);
}
- if (!(dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_RSSI)) {
+ if (!(dev->dev->bus->sprom.boardflags_lo & B43legacy_BFL_RSSI)) {
/* The specs state to update the NRSSI LT with
* the value 0x7FFFFFFF here. I think that is some weird
* compiler optimization in the original driver.
@@ -1838,9 +1838,9 @@
estimated_pwr = b43legacy_phy_estimate_power_out(dev, average);
- max_pwr = dev->dev->bus->sprom.r1.maxpwr_bg;
+ max_pwr = dev->dev->bus->sprom.maxpwr_bg;
- if ((dev->dev->bus->sprom.r1.boardflags_lo
+ if ((dev->dev->bus->sprom.boardflags_lo
& B43legacy_BFL_PACTRL) &&
(phy->type == B43legacy_PHYTYPE_G))
max_pwr -= 0x3;
@@ -1848,7 +1848,7 @@
b43legacywarn(dev->wl, "Invalid max-TX-power value in SPROM."
"\n");
max_pwr = 74; /* fake it */
- dev->dev->bus->sprom.r1.maxpwr_bg = max_pwr;
+ dev->dev->bus->sprom.maxpwr_bg = max_pwr;
}
/* Use regulatory information to get the maximum power.
@@ -1858,7 +1858,8 @@
* and 1.5 dBm (a safety factor??). The result is in Q5.2 format
* which accounts for the factor of 4 */
#define REG_MAX_PWR 20
- max_pwr = min(REG_MAX_PWR * 4 - dev->dev->bus->sprom.r1.antenna_gain_bg
+ max_pwr = min(REG_MAX_PWR * 4
+ - dev->dev->bus->sprom.antenna_gain_bg
- 0x6, max_pwr);
/* find the desired power in Q5.2 - power_level is in dBm
@@ -1918,7 +1919,7 @@
txpower = 3;
radio_attenuation += 2;
baseband_attenuation += 2;
- } else if (dev->dev->bus->sprom.r1.boardflags_lo
+ } else if (dev->dev->bus->sprom.boardflags_lo
& B43legacy_BFL_PACTRL) {
baseband_attenuation += 4 *
(radio_attenuation - 2);
@@ -2000,9 +2001,9 @@
B43legacy_WARN_ON(!(phy->type == B43legacy_PHYTYPE_B ||
phy->type == B43legacy_PHYTYPE_G));
- pab0 = (s16)(dev->dev->bus->sprom.r1.pa0b0);
- pab1 = (s16)(dev->dev->bus->sprom.r1.pa0b1);
- pab2 = (s16)(dev->dev->bus->sprom.r1.pa0b2);
+ pab0 = (s16)(dev->dev->bus->sprom.pa0b0);
+ pab1 = (s16)(dev->dev->bus->sprom.pa0b1);
+ pab2 = (s16)(dev->dev->bus->sprom.pa0b2);
if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) {
phy->idle_tssi = 0x34;
@@ -2013,9 +2014,10 @@
if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
pab0 != -1 && pab1 != -1 && pab2 != -1) {
/* The pabX values are set in SPROM. Use them. */
- if ((s8)dev->dev->bus->sprom.r1.itssi_bg != 0 &&
- (s8)dev->dev->bus->sprom.r1.itssi_bg != -1)
- phy->idle_tssi = (s8)(dev->dev->bus->sprom.r1.itssi_bg);
+ if ((s8)dev->dev->bus->sprom.itssi_bg != 0 &&
+ (s8)dev->dev->bus->sprom.itssi_bg != -1)
+ phy->idle_tssi = (s8)(dev->dev->bus->sprom.
+ itssi_bg);
else
phy->idle_tssi = 62;
dyn_tssi2dbm = kmalloc(64, GFP_KERNEL);