mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
Add O2Micro/BayHubTech chip 8520 subversion B1 SD3.0 support.
Add O2Micro/BayHubTech chip 8620 and 8621 SD3.0 support
Enable Led function of 8520 chip.
Signed-off-by: Peter Guo <peter.guo@bayhubtech.com>
Signed-off-by: Adam Lee <adam.lee@canonical.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index f49666b..5670e38 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -21,6 +21,45 @@
#include "sdhci-pci.h"
#include "sdhci-pci-o2micro.h"
+static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
+{
+ u32 scratch_32;
+ pci_read_config_dword(chip->pdev,
+ O2_SD_PLL_SETTING, &scratch_32);
+
+ scratch_32 &= 0x0000FFFF;
+ scratch_32 |= value;
+
+ pci_write_config_dword(chip->pdev,
+ O2_SD_PLL_SETTING, scratch_32);
+}
+
+static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
+{
+ int ret;
+ u32 scratch_32;
+
+ /* Set led of SD host function enable */
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_FUNC_REG0, &scratch_32);
+ if (ret)
+ return;
+
+ scratch_32 &= ~O2_SD_FREG0_LEDOFF;
+ pci_write_config_dword(chip->pdev,
+ O2_SD_FUNC_REG0, scratch_32);
+
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_TEST_REG, &scratch_32);
+ if (ret)
+ return;
+
+ scratch_32 |= O2_SD_LED_ENABLE;
+ pci_write_config_dword(chip->pdev,
+ O2_SD_TEST_REG, scratch_32);
+
+}
+
void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
{
u32 scratch_32;
@@ -216,6 +255,40 @@
scratch &= 0x7f;
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+ /* DevId=8520 subId= 0x11 or 0x12 Type Chip support */
+ if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) {
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_FUNC_REG0,
+ &scratch_32);
+ scratch_32 = ((scratch_32 & 0xFF000000) >> 24);
+
+ /* Check Whether subId is 0x11 or 0x12 */
+ if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
+ scratch_32 = 0x2c280000;
+
+ /* Set Base Clock to 208MZ */
+ o2_pci_set_baseclk(chip, scratch_32);
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_FUNC_REG4,
+ &scratch_32);
+
+ /* Enable Base Clk setting change */
+ scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
+ pci_write_config_dword(chip->pdev,
+ O2_SD_FUNC_REG4,
+ scratch_32);
+
+ /* Set Tuning Window to 4 */
+ pci_write_config_byte(chip->pdev,
+ O2_SD_TUNING_CTRL, 0x44);
+
+ break;
+ }
+ }
+
+ /* Enable 8520 led function */
+ o2_pci_led_enable(chip);
+
/* Set timeout CLK */
ret = pci_read_config_dword(chip->pdev,
O2_SD_CLK_SETTING, &scratch_32);
@@ -276,7 +349,7 @@
pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
ret = pci_read_config_dword(chip->pdev,
- O2_SD_FUNC_REG0, &scratch_32);
+ O2_SD_PLL_SETTING, &scratch_32);
if ((scratch_32 & 0xff000000) == 0x01000000) {
scratch_32 &= 0x0000FFFF;
@@ -299,6 +372,9 @@
O2_SD_FUNC_REG4, scratch_32);
}
+ /* Set Tuning Windows to 5 */
+ pci_write_config_byte(chip->pdev,
+ O2_SD_TUNING_CTRL, 0x55);
/* Lock WP */
ret = pci_read_config_byte(chip->pdev,
O2_SD_LOCK_WP, &scratch);