[SCSI] qla2xxx: Use standard PCIe Capability Link register field names
Use the standard #defines for PCIe Link Capability register fields
rather than bare numbers. This also uses the new PCI Express Capability
accessor rather than reading the capability directly.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 9f01bbb..bcd57f6 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -494,18 +494,14 @@
static char *pci_bus_modes[] = { "33", "66", "100", "133", };
struct qla_hw_data *ha = vha->hw;
uint32_t pci_bus;
- int pcie_reg;
- pcie_reg = pci_pcie_cap(ha->pdev);
- if (pcie_reg) {
+ if (pci_is_pcie(ha->pdev)) {
char lwstr[6];
- uint16_t pcie_lstat, lspeed, lwidth;
+ uint32_t lstat, lspeed, lwidth;
- pcie_reg += PCI_EXP_LNKCAP;
- pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
- lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
- lwidth = (pcie_lstat &
- (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
+ pcie_capability_read_dword(ha->pdev, PCI_EXP_LNKCAP, &lstat);
+ lspeed = lstat & PCI_EXP_LNKCAP_SLS;
+ lwidth = (lstat & PCI_EXP_LNKCAP_MLW) >> 4;
strcpy(str, "PCIe (");
switch (lspeed) {