diff --git a/include/linux/timex.h b/include/linux/timex.h
index 7c5ceb2..5ec87c6 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -53,120 +53,11 @@
 #ifndef _LINUX_TIMEX_H
 #define _LINUX_TIMEX_H
 
-#include <linux/time.h>
+#include <uapi/linux/timex.h>
 
-#define NTP_API		4	/* NTP API version */
-
-/*
- * syscall interface - used (mainly by NTP daemon)
- * to discipline kernel clock oscillator
- */
-struct timex {
-	unsigned int modes;	/* mode selector */
-	long offset;		/* time offset (usec) */
-	long freq;		/* frequency offset (scaled ppm) */
-	long maxerror;		/* maximum error (usec) */
-	long esterror;		/* estimated error (usec) */
-	int status;		/* clock command/status */
-	long constant;		/* pll time constant */
-	long precision;		/* clock precision (usec) (read only) */
-	long tolerance;		/* clock frequency tolerance (ppm)
-				 * (read only)
-				 */
-	struct timeval time;	/* (read only, except for ADJ_SETOFFSET) */
-	long tick;		/* (modified) usecs between clock ticks */
-
-	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
-	long jitter;            /* pps jitter (us) (ro) */
-	int shift;              /* interval duration (s) (shift) (ro) */
-	long stabil;            /* pps stability (scaled ppm) (ro) */
-	long jitcnt;            /* jitter limit exceeded (ro) */
-	long calcnt;            /* calibration intervals (ro) */
-	long errcnt;            /* calibration errors (ro) */
-	long stbcnt;            /* stability limit exceeded (ro) */
-
-	int tai;		/* TAI offset (ro) */
-
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32;
-};
-
-/*
- * Mode codes (timex.mode)
- */
-#define ADJ_OFFSET		0x0001	/* time offset */
-#define ADJ_FREQUENCY		0x0002	/* frequency offset */
-#define ADJ_MAXERROR		0x0004	/* maximum time error */
-#define ADJ_ESTERROR		0x0008	/* estimated time error */
-#define ADJ_STATUS		0x0010	/* clock status */
-#define ADJ_TIMECONST		0x0020	/* pll time constant */
-#define ADJ_TAI			0x0080	/* set TAI offset */
-#define ADJ_SETOFFSET		0x0100  /* add 'time' to current time */
-#define ADJ_MICRO		0x1000	/* select microsecond resolution */
-#define ADJ_NANO		0x2000	/* select nanosecond resolution */
-#define ADJ_TICK		0x4000	/* tick value */
-
-#ifdef __KERNEL__
 #define ADJ_ADJTIME		0x8000	/* switch between adjtime/adjtimex modes */
 #define ADJ_OFFSET_SINGLESHOT	0x0001	/* old-fashioned adjtime */
 #define ADJ_OFFSET_READONLY	0x2000	/* read-only adjtime */
-#else
-#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
-#define ADJ_OFFSET_SS_READ	0xa001	/* read-only adjtime */
-#endif
-
-/* NTP userland likes the MOD_ prefix better */
-#define MOD_OFFSET	ADJ_OFFSET
-#define MOD_FREQUENCY	ADJ_FREQUENCY
-#define MOD_MAXERROR	ADJ_MAXERROR
-#define MOD_ESTERROR	ADJ_ESTERROR
-#define MOD_STATUS	ADJ_STATUS
-#define MOD_TIMECONST	ADJ_TIMECONST
-#define MOD_TAI	ADJ_TAI
-#define MOD_MICRO	ADJ_MICRO
-#define MOD_NANO	ADJ_NANO
-
-
-/*
- * Status codes (timex.status)
- */
-#define STA_PLL		0x0001	/* enable PLL updates (rw) */
-#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
-#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
-#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */
-
-#define STA_INS		0x0010	/* insert leap (rw) */
-#define STA_DEL		0x0020	/* delete leap (rw) */
-#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
-#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */
-
-#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
-#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
-#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
-#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
-
-#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
-#define STA_NANO	0x2000	/* resolution (0 = us, 1 = ns) (ro) */
-#define STA_MODE	0x4000	/* mode (0 = PLL, 1 = FLL) (ro) */
-#define STA_CLK		0x8000	/* clock source (0 = A, 1 = B) (ro) */
-
-/* read-only bits */
-#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
-	STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
-
-/*
- * Clock states (time_state)
- */
-#define TIME_OK		0	/* clock synchronized, no leap second */
-#define TIME_INS	1	/* insert leap second */
-#define TIME_DEL	2	/* delete leap second */
-#define TIME_OOP	3	/* leap second in progress */
-#define TIME_WAIT	4	/* leap second has occurred */
-#define TIME_ERROR	5	/* clock not synchronized */
-#define TIME_BAD	TIME_ERROR /* bw compat */
-
-#ifdef __KERNEL__
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/param.h>
@@ -261,6 +152,4 @@
 /* The clock frequency of the i8253/i8254 PIT */
 #define PIT_TICK_RATE 1193182ul
 
-#endif /* KERNEL */
-
 #endif /* LINUX_TIMEX_H */