Input: wacom_w8001 - add single-touch support
Emulate single-touch compatible events for the 2-finger panels
so that they can be used with single-touch legacy clients.
Assign device ids as Wacom USB vendor ID and product ID.
Name the device to reflect its specific features.
Scale touch coordinates to pen maximum if pen supported.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 8ed53ad..5cb8449 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -3,6 +3,7 @@
*
* Copyright (c) 2008 Jaya Kumar
* Copyright (c) 2010 Red Hat, Inc.
+ * Copyright (c) 2010 - 2011 Ping Cheng, Wacom. <pingc@wacom.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
@@ -64,11 +65,11 @@
/* touch query reply packet */
struct w8001_touch_query {
+ u16 x;
+ u16 y;
u8 panel_res;
u8 capacity_res;
u8 sensor_id;
- u16 x;
- u16 y;
};
/*
@@ -87,9 +88,14 @@
char phys[32];
int type;
unsigned int pktlen;
+ u16 max_touch_x;
+ u16 max_touch_y;
+ u16 max_pen_x;
+ u16 max_pen_y;
+ char name[64];
};
-static void parse_data(u8 *data, struct w8001_coord *coord)
+static void parse_pen_data(u8 *data, struct w8001_coord *coord)
{
memset(coord, 0, sizeof(*coord));
@@ -113,11 +119,30 @@
coord->tilt_y = data[8] & 0x7F;
}
-static void parse_touch(struct w8001 *w8001)
+static void parse_single_touch(u8 *data, struct w8001_coord *coord)
+{
+ coord->x = (data[1] << 7) | data[2];
+ coord->y = (data[3] << 7) | data[4];
+ coord->tsw = data[0] & 0x01;
+}
+
+static void scale_touch_coordinates(struct w8001 *w8001,
+ unsigned int *x, unsigned int *y)
+{
+ if (w8001->max_pen_x && w8001->max_touch_x)
+ *x = *x * w8001->max_pen_x / w8001->max_touch_x;
+
+ if (w8001->max_pen_y && w8001->max_touch_y)
+ *y = *y * w8001->max_pen_y / w8001->max_touch_y;
+}
+
+static void parse_multi_touch(struct w8001 *w8001)
{
struct input_dev *dev = w8001->dev;
unsigned char *data = w8001->data;
+ unsigned int x, y;
int i;
+ int count = 0;
for (i = 0; i < 2; i++) {
bool touch = data[0] & (1 << i);
@@ -125,15 +150,29 @@
input_mt_slot(dev, i);
input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
if (touch) {
- int x = (data[6 * i + 1] << 7) | (data[6 * i + 2]);
- int y = (data[6 * i + 3] << 7) | (data[6 * i + 4]);
+ x = (data[6 * i + 1] << 7) | data[6 * i + 2];
+ y = (data[6 * i + 3] << 7) | data[6 * i + 4];
/* data[5,6] and [11,12] is finger capacity */
+ /* scale to pen maximum */
+ scale_touch_coordinates(w8001, &x, &y);
+
input_report_abs(dev, ABS_MT_POSITION_X, x);
input_report_abs(dev, ABS_MT_POSITION_Y, y);
+ count++;
}
}
+ /* emulate single touch events when stylus is out of proximity.
+ * This is to make single touch backward support consistent
+ * across all Wacom single touch devices.
+ */
+ if (w8001->type != BTN_TOOL_PEN &&
+ w8001->type != BTN_TOOL_RUBBER) {
+ w8001->type = count == 1 ? BTN_TOOL_FINGER : KEY_RESERVED;
+ input_mt_report_pointer_emulation(dev, true);
+ }
+
input_sync(dev);
}
@@ -152,6 +191,15 @@
query->y = data[5] << 9;
query->y |= data[6] << 2;
query->y |= (data[2] >> 3) & 0x3;
+
+ /* Early days' single-finger touch models need the following defaults */
+ if (!query->x && !query->y) {
+ query->x = 1024;
+ query->y = 1024;
+ if (query->panel_res)
+ query->x = query->y = (1 << query->panel_res);
+ query->panel_res = 10;
+ }
}
static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
@@ -161,16 +209,15 @@
/*
* We have 1 bit for proximity (rdy) and 3 bits for tip, side,
* side2/eraser. If rdy && f2 are set, this can be either pen + side2,
- * or eraser. assume
+ * or eraser. Assume:
* - if dev is already in proximity and f2 is toggled → pen + side2
* - if dev comes into proximity with f2 set → eraser
* If f2 disappears after assuming eraser, fake proximity out for
* eraser and in for pen.
*/
- if (!w8001->type) {
- w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
- } else if (w8001->type == BTN_TOOL_RUBBER) {
+ switch (w8001->type) {
+ case BTN_TOOL_RUBBER:
if (!coord->f2) {
input_report_abs(dev, ABS_PRESSURE, 0);
input_report_key(dev, BTN_TOUCH, 0);
@@ -180,8 +227,21 @@
input_sync(dev);
w8001->type = BTN_TOOL_PEN;
}
- } else {
+ break;
+
+ case BTN_TOOL_FINGER:
+ input_report_key(dev, BTN_TOUCH, 0);
+ input_report_key(dev, BTN_TOOL_FINGER, 0);
+ input_sync(dev);
+ /* fall through */
+
+ case KEY_RESERVED:
+ w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ break;
+
+ default:
input_report_key(dev, BTN_STYLUS2, coord->f2);
+ break;
}
input_report_abs(dev, ABS_X, coord->x);
@@ -193,7 +253,26 @@
input_sync(dev);
if (!coord->rdy)
- w8001->type = 0;
+ w8001->type = KEY_RESERVED;
+}
+
+static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord)
+{
+ struct input_dev *dev = w8001->dev;
+ unsigned int x = coord->x;
+ unsigned int y = coord->y;
+
+ /* scale to pen maximum */
+ scale_touch_coordinates(w8001, &x, &y);
+
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
+ input_report_key(dev, BTN_TOUCH, coord->tsw);
+ input_report_key(dev, BTN_TOOL_FINGER, coord->tsw);
+
+ input_sync(dev);
+
+ w8001->type = coord->tsw ? BTN_TOOL_FINGER : KEY_RESERVED;
}
static irqreturn_t w8001_interrupt(struct serio *serio,
@@ -214,9 +293,18 @@
case W8001_PKTLEN_TOUCH93 - 1:
case W8001_PKTLEN_TOUCH9A - 1:
- /* ignore one-finger touch packet. */
- if (w8001->pktlen == w8001->idx)
+ tmp = w8001->data[0] & W8001_TOUCH_BYTE;
+ if (tmp != W8001_TOUCH_BYTE)
+ break;
+
+ if (w8001->pktlen == w8001->idx) {
w8001->idx = 0;
+ if (w8001->type != BTN_TOOL_PEN &&
+ w8001->type != BTN_TOOL_RUBBER) {
+ parse_single_touch(w8001->data, &coord);
+ report_single_touch(w8001, &coord);
+ }
+ }
break;
/* Pen coordinates packet */
@@ -225,18 +313,18 @@
if (unlikely(tmp == W8001_TAB_BYTE))
break;
- tmp = (w8001->data[0] & W8001_TOUCH_BYTE);
+ tmp = w8001->data[0] & W8001_TOUCH_BYTE;
if (tmp == W8001_TOUCH_BYTE)
break;
w8001->idx = 0;
- parse_data(w8001->data, &coord);
+ parse_pen_data(w8001->data, &coord);
report_pen_events(w8001, &coord);
break;
/* control packet */
case W8001_PKTLEN_TPCCTL - 1:
- tmp = (w8001->data[0] & W8001_TOUCH_MASK);
+ tmp = w8001->data[0] & W8001_TOUCH_MASK;
if (tmp == W8001_TOUCH_BYTE)
break;
@@ -249,7 +337,7 @@
/* 2 finger touch packet */
case W8001_PKTLEN_TOUCH2FG - 1:
w8001->idx = 0;
- parse_touch(w8001);
+ parse_multi_touch(w8001);
break;
}
@@ -279,6 +367,7 @@
{
struct input_dev *dev = w8001->dev;
struct w8001_coord coord;
+ struct w8001_touch_query touch;
int error;
error = w8001_command(w8001, W8001_CMD_STOP, false);
@@ -287,14 +376,21 @@
msleep(250); /* wait 250ms before querying the device */
+ dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name));
+
/* penabled? */
error = w8001_command(w8001, W8001_CMD_QUERY, true);
if (!error) {
+ __set_bit(BTN_TOUCH, dev->keybit);
__set_bit(BTN_TOOL_PEN, dev->keybit);
__set_bit(BTN_TOOL_RUBBER, dev->keybit);
__set_bit(BTN_STYLUS, dev->keybit);
__set_bit(BTN_STYLUS2, dev->keybit);
- parse_data(w8001->response, &coord);
+
+ parse_pen_data(w8001->response, &coord);
+ w8001->max_pen_x = coord.x;
+ w8001->max_pen_y = coord.y;
input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
@@ -303,6 +399,8 @@
input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
}
+ w8001->id = 0x90;
+ strlcat(w8001->name, " Penabled", sizeof(w8001->name));
}
/* Touch enabled? */
@@ -313,24 +411,38 @@
* second byte is empty, which indicates touch is not supported.
*/
if (!error && w8001->response[1]) {
- struct w8001_touch_query touch;
+ __set_bit(BTN_TOUCH, dev->keybit);
+ __set_bit(BTN_TOOL_FINGER, dev->keybit);
parse_touchquery(w8001->response, &touch);
+ w8001->max_touch_x = touch.x;
+ w8001->max_touch_y = touch.y;
+
+ /* scale to pen maximum */
+ if (w8001->max_pen_x && w8001->max_pen_y) {
+ touch.x = w8001->max_pen_x;
+ touch.y = w8001->max_pen_y;
+ }
input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
- __set_bit(BTN_TOOL_FINGER, dev->keybit);
switch (touch.sensor_id) {
case 0:
case 2:
w8001->pktlen = W8001_PKTLEN_TOUCH93;
+ w8001->id = 0x93;
+ strlcat(w8001->name, " 1FG", sizeof(w8001->name));
break;
+
case 1:
case 3:
case 4:
w8001->pktlen = W8001_PKTLEN_TOUCH9A;
+ strlcat(w8001->name, " 1FG", sizeof(w8001->name));
+ w8001->id = 0x9a;
break;
+
case 5:
w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
@@ -341,10 +453,18 @@
0, touch.y, 0, 0);
input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
0, MT_TOOL_MAX, 0, 0);
+
+ strlcat(w8001->name, " 2FG", sizeof(w8001->name));
+ if (w8001->max_pen_x && w8001->max_pen_y)
+ w8001->id = 0xE3;
+ else
+ w8001->id = 0xE2;
break;
}
}
+ strlcat(w8001->name, " Touchscreen", sizeof(w8001->name));
+
return w8001_command(w8001, W8001_CMD_START, false);
}
@@ -384,22 +504,10 @@
}
w8001->serio = serio;
- w8001->id = serio->id.id;
w8001->dev = input_dev;
init_completion(&w8001->cmd_done);
snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
- input_dev->name = "Wacom W8001 Penabled Serial TouchScreen";
- input_dev->phys = w8001->phys;
- input_dev->id.bustype = BUS_RS232;
- input_dev->id.vendor = SERIO_W8001;
- input_dev->id.product = w8001->id;
- input_dev->id.version = 0x0100;
- input_dev->dev.parent = &serio->dev;
-
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- __set_bit(BTN_TOUCH, input_dev->keybit);
-
serio_set_drvdata(serio, w8001);
err = serio_open(serio, drv);
if (err)
@@ -409,6 +517,14 @@
if (err)
goto fail3;
+ input_dev->name = w8001->name;
+ input_dev->phys = w8001->phys;
+ input_dev->id.product = w8001->id;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = 0x056a;
+ input_dev->id.version = 0x0100;
+ input_dev->dev.parent = &serio->dev;
+
err = input_register_device(w8001->dev);
if (err)
goto fail3;