drm/i915: Assert that VED and ISP are power gated
As there are no upstream drivers for VED or ISP let's just
assert that they are power gated. Otherwise they would
prevent s0ix entry.
For ISP this is only relevant when it is not exposed as a
PCI device and instead is a subordinate of the gunit. When
exposed as a PCI device it will be handled by the
atomisp2_pm driver.
On my VLV FFRD8 board the firmware power gates both of these
by default. Let's assume that is always the case and just
WARN if we ever encounter something different.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129175504.3630-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 1a07bce..0df8c6e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1044,6 +1044,31 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
/* See configdb bunit SB addr map */
#define BUNIT_REG_BISOC 0x11
+/* PUNIT_REG_*SSPM0 */
+#define _SSPM0_SSC(val) ((val) << 0)
+#define SSPM0_SSC_MASK _SSPM0_SSC(0x3)
+#define SSPM0_SSC_PWR_ON _SSPM0_SSC(0x0)
+#define SSPM0_SSC_CLK_GATE _SSPM0_SSC(0x1)
+#define SSPM0_SSC_RESET _SSPM0_SSC(0x2)
+#define SSPM0_SSC_PWR_GATE _SSPM0_SSC(0x3)
+#define _SSPM0_SSS(val) ((val) << 24)
+#define SSPM0_SSS_MASK _SSPM0_SSS(0x3)
+#define SSPM0_SSS_PWR_ON _SSPM0_SSS(0x0)
+#define SSPM0_SSS_CLK_GATE _SSPM0_SSS(0x1)
+#define SSPM0_SSS_RESET _SSPM0_SSS(0x2)
+#define SSPM0_SSS_PWR_GATE _SSPM0_SSS(0x3)
+
+/* PUNIT_REG_*SSPM1 */
+#define SSPM1_FREQSTAT_SHIFT 24
+#define SSPM1_FREQSTAT_MASK (0x1f << SSPM1_FREQSTAT_SHIFT)
+#define SSPM1_FREQGUAR_SHIFT 8
+#define SSPM1_FREQGUAR_MASK (0x1f << SSPM1_FREQGUAR_SHIFT)
+#define SSPM1_FREQ_SHIFT 0
+#define SSPM1_FREQ_MASK (0x1f << SSPM1_FREQ_SHIFT)
+
+#define PUNIT_REG_VEDSSPM0 0x32
+#define PUNIT_REG_VEDSSPM1 0x33
+
#define PUNIT_REG_DSPSSPM 0x36
#define DSPFREQSTAT_SHIFT_CHV 24
#define DSPFREQSTAT_MASK_CHV (0x1f << DSPFREQSTAT_SHIFT_CHV)
@@ -1069,6 +1094,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
#define DP_SSS_RESET(pipe) _DP_SSS(0x2, (pipe))
#define DP_SSS_PWR_GATE(pipe) _DP_SSS(0x3, (pipe))
+#define PUNIT_REG_ISPSSPM0 0x39
+#define PUNIT_REG_ISPSSPM1 0x3a
+
/*
* i915_power_well_id:
*