Merge branch 'master'
diff --git a/CREDITS b/CREDITS
index a347520..5b1edf3 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2247,6 +2247,12 @@
S: Syracuse, New York 13206
S: USA
+N: Kyle McMartin
+E: kyle@parisc-linux.org
+D: Linux/PARISC hacker
+D: AD1889 sound driver
+S: Ottawa, Canada
+
N: Dirk Melchers
E: dirk@merlin.nbg.sub.org
D: 8 bit XT hard disk driver for OMTI5520
diff --git a/Documentation/Changes b/Documentation/Changes
index 27232be..783ddc3 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -65,7 +65,7 @@
o nfs-utils 1.0.5 # showmount --version
o procps 3.2.0 # ps --version
o oprofile 0.9 # oprofiled --version
-o udev 058 # udevinfo -V
+o udev 071 # udevinfo -V
Kernel compilation
==================
diff --git a/Documentation/DocBook/writing_usb_driver.tmpl b/Documentation/DocBook/writing_usb_driver.tmpl
index 51f3bfb..008a341 100644
--- a/Documentation/DocBook/writing_usb_driver.tmpl
+++ b/Documentation/DocBook/writing_usb_driver.tmpl
@@ -345,8 +345,7 @@
<programlisting>
static inline void skel_delete (struct usb_skel *dev)
{
- if (dev->bulk_in_buffer != NULL)
- kfree (dev->bulk_in_buffer);
+ kfree (dev->bulk_in_buffer);
if (dev->bulk_out_buffer != NULL)
usb_buffer_free (dev->udev, dev->bulk_out_size,
dev->bulk_out_buffer,
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index fabaca1..59806c9 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -14,8 +14,8 @@
int (*probe) (struct device * dev);
int (*remove) (struct device * dev);
- int (*suspend) (struct device * dev, pm_message_t state, u32 level);
- int (*resume) (struct device * dev, u32 level);
+ int (*suspend) (struct device * dev, pm_message_t state);
+ int (*resume) (struct device * dev);
};
@@ -194,69 +194,13 @@
If the device is still present, it should quiesce the device and place
it into a supported low-power state.
- int (*suspend) (struct device * dev, pm_message_t state, u32 level);
+ int (*suspend) (struct device * dev, pm_message_t state);
-suspend is called to put the device in a low power state. There are
-several stages to successfully suspending a device, which is denoted in
-the @level parameter. Breaking the suspend transition into several
-stages affords the platform flexibility in performing device power
-management based on the requirements of the system and the
-user-defined policy.
+suspend is called to put the device in a low power state.
-SUSPEND_NOTIFY notifies the device that a suspend transition is about
-to happen. This happens on system power state transitions to verify
-that all devices can successfully suspend.
+ int (*resume) (struct device * dev);
-A driver may choose to fail on this call, which should cause the
-entire suspend transition to fail. A driver should fail only if it
-knows that the device will not be able to be resumed properly when the
-system wakes up again. It could also fail if it somehow determines it
-is in the middle of an operation too important to stop.
-
-SUSPEND_DISABLE tells the device to stop I/O transactions. When it
-stops transactions, or what it should do with unfinished transactions
-is a policy of the driver. After this call, the driver should not
-accept any other I/O requests.
-
-SUSPEND_SAVE_STATE tells the device to save the context of the
-hardware. This includes any bus-specific hardware state and
-device-specific hardware state. A pointer to this saved state can be
-stored in the device's saved_state field.
-
-SUSPEND_POWER_DOWN tells the driver to place the device in the low
-power state requested.
-
-Whether suspend is called with a given level is a policy of the
-platform. Some levels may be omitted; drivers must not assume the
-reception of any level. However, all levels must be called in the
-order above; i.e. notification will always come before disabling;
-disabling the device will come before suspending the device.
-
-All calls are made with interrupts enabled, except for the
-SUSPEND_POWER_DOWN level.
-
- int (*resume) (struct device * dev, u32 level);
-
-Resume is used to bring a device back from a low power state. Like the
-suspend transition, it happens in several stages.
-
-RESUME_POWER_ON tells the driver to set the power state to the state
-before the suspend call (The device could have already been in a low
-power state before the suspend call to put in a lower power state).
-
-RESUME_RESTORE_STATE tells the driver to restore the state saved by
-the SUSPEND_SAVE_STATE suspend call.
-
-RESUME_ENABLE tells the driver to start accepting I/O transactions
-again. Depending on driver policy, the device may already have pending
-I/O requests.
-
-RESUME_POWER_ON is called with interrupts disabled. The other resume
-levels are called with interrupts enabled.
-
-As with the various suspend stages, the driver must not assume that
-any other resume calls have been or will be made. Each call should be
-self-contained and not dependent on any external state.
+Resume is used to bring a device back from a low power state.
Attributes
diff --git a/Documentation/driver-model/porting.txt b/Documentation/driver-model/porting.txt
index ff2fef2..98b233c 100644
--- a/Documentation/driver-model/porting.txt
+++ b/Documentation/driver-model/porting.txt
@@ -350,7 +350,7 @@
over. bus->match() is called for each device that is not already
claimed by a driver.
-When a device is successfully bound to a device, device->driver is
+When a device is successfully bound to a driver, device->driver is
set, the device is added to a per-driver list of devices, and a
symlink is created in the driver's sysfs directory that points to the
device's physical directory:
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 0d01950..7f42e44 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -4,18 +4,18 @@
Supported chips:
* IT8705F
Prefix: 'it87'
- Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* IT8712F
Prefix: 'it8712'
Addresses scanned: I2C 0x28 - 0x2f
- from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* SiS950 [clone of IT8705F]
- Prefix: 'sis950'
- Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ Prefix: 'it87'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: No longer be available
Author: Christophe Gauthron <chrisg@0-in.com>
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 2c4cf39..438cb24 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -24,14 +24,14 @@
http://www.national.com/pf/LM/LM86.html
* Analog Devices ADM1032
Prefix: 'adm1032'
- Addresses scanned: I2C 0x4c
+ Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the Analog Devices website
- http://products.analog.com/products/info.asp?product=ADM1032
+ http://www.analog.com/en/prod/0,2877,ADM1032,00.html
* Analog Devices ADT7461
Prefix: 'adt7461'
- Addresses scanned: I2C 0x4c
+ Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the Analog Devices website
- http://products.analog.com/products/info.asp?product=ADT7461
+ http://www.analog.com/en/prod/0,2877,ADT7461,00.html
Note: Only if in ADM1032 compatibility mode
* Maxim MAX6657
Prefix: 'max6657'
@@ -71,8 +71,8 @@
The different chipsets of the family are not strictly identical, although
very similar. This driver doesn't handle any specific feature for now,
-but could if there ever was a need for it. For reference, here comes a
-non-exhaustive list of specific features:
+with the exception of SMBus PEC. For reference, here comes a non-exhaustive
+list of specific features:
LM90:
* Filter and alert configuration register at 0xBF.
@@ -91,6 +91,7 @@
* Conversion averaging.
* Up to 64 conversions/s.
* ALERT is triggered by open remote sensor.
+ * SMBus PEC support for Write Byte and Receive Byte transactions.
ADT7461
* Extended temperature range (breaks compatibility)
@@ -119,3 +120,37 @@
other second; reading them more often will do no harm, but will return
'old' values.
+PEC Support
+-----------
+
+The ADM1032 is the only chip of the family which supports PEC. It does
+not support PEC on all transactions though, so some care must be taken.
+
+When reading a register value, the PEC byte is computed and sent by the
+ADM1032 chip. However, in the case of a combined transaction (SMBus Read
+Byte), the ADM1032 computes the CRC value over only the second half of
+the message rather than its entirety, because it thinks the first half
+of the message belongs to a different transaction. As a result, the CRC
+value differs from what the SMBus master expects, and all reads fail.
+
+For this reason, the lm90 driver will enable PEC for the ADM1032 only if
+the bus supports the SMBus Send Byte and Receive Byte transaction types.
+These transactions will be used to read register values, instead of
+SMBus Read Byte, and PEC will work properly.
+
+Additionally, the ADM1032 doesn't support SMBus Send Byte with PEC.
+Instead, it will try to write the PEC value to the register (because the
+SMBus Send Byte transaction with PEC is similar to a Write Byte transaction
+without PEC), which is not what we want. Thus, PEC is explicitely disabled
+on SMBus Send Byte transactions in the lm90 driver.
+
+PEC on byte data transactions represents a significant increase in bandwidth
+usage (+33% for writes, +25% for reads) in normal conditions. With the need
+to use two SMBus transaction for reads, this overhead jumps to +50%. Worse,
+two transactions will typically mean twice as much delay waiting for
+transaction completion, effectively doubling the register cache refresh time.
+I guess reliability comes at a price, but it's quite expensive this time.
+
+So, as not everyone might enjoy the slowdown, PEC can be disabled through
+sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1
+to that file to enable PEC again.
diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397
index da9d80c..20682f1 100644
--- a/Documentation/hwmon/smsc47b397
+++ b/Documentation/hwmon/smsc47b397
@@ -3,6 +3,7 @@
Supported chips:
* SMSC LPC47B397-NC
+ * SMSC SCH5307-NS
Prefix: 'smsc47b397'
Addresses scanned: none, address read from Super I/O config space
Datasheet: In this file
@@ -12,11 +13,14 @@
November 23, 2004
-The following specification describes the SMSC LPC47B397-NC sensor chip
+The following specification describes the SMSC LPC47B397-NC[1] sensor chip
(for which there is no public datasheet available). This document was
provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
by Mark M. Hoffman <mhoffman@lightlink.com>.
+[1] And SMSC SCH5307-NS, which has a different device ID but is otherwise
+compatible.
+
* * * * *
Methods for detecting the HP SIO and reading the thermal data on a dc7100.
@@ -127,7 +131,7 @@
The registers of interest for identifying the SIO on the dc7100 are Device ID
(0x20) and Device Rev (0x21).
-The Device ID will read 0X6F
+The Device ID will read 0x6F (for SCH5307-NS, 0x81)
The Device Rev currently reads 0x01
Obtaining the HWM Base Address.
diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1
index 34e6478..c15bbe6 100644
--- a/Documentation/hwmon/smsc47m1
+++ b/Documentation/hwmon/smsc47m1
@@ -12,6 +12,10 @@
http://www.smsc.com/main/datasheets/47m14x.pdf
http://www.smsc.com/main/tools/discontinued/47m15x.pdf
http://www.smsc.com/main/datasheets/47m192.pdf
+ * SMSC LPC47M997
+ Addresses scanned: none, address read from Super I/O config space
+ Prefix: 'smsc47m1'
+ Datasheet: none
Authors:
Mark D. Studebaker <mdsxyz123@yahoo.com>,
@@ -30,6 +34,9 @@
in addition to the fan monitoring and control. The hardware monitoring
block is not supported by the driver.
+No documentation is available for the 47M997, but it has the same device
+ID as the 47M15x and 47M192 chips and seems to be compatible.
+
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 3464005..764cdc5 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -272,3 +272,6 @@
eeprom Raw EEPROM data in binary form.
Read only.
+
+pec Enable or disable PEC (SMBus only)
+ Read/Write
diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a
index b82014c..a936fb3 100644
--- a/Documentation/hwmon/via686a
+++ b/Documentation/hwmon/via686a
@@ -18,8 +18,9 @@
Module Parameters
-----------------
-force_addr=0xaddr Set the I/O base address. Useful for Asus A7V boards
- that don't set the address in the BIOS. Does not do a
+force_addr=0xaddr Set the I/O base address. Useful for boards that
+ don't set the address in the BIOS. Look for a BIOS
+ upgrade before resorting to this. Does not do a
PCI force; the via686a must still be present in lspci.
Don't use this unless the driver complains that the
base address is not set.
@@ -63,3 +64,15 @@
The driver only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
+
+Known Issues
+------------
+
+This driver handles sensors integrated in some VIA south bridges. It is
+possible that a motherboard maker used a VT82C686A/B chip as part of a
+product design but was not interested in its hardware monitoring features,
+in which case the sensor inputs will not be wired. This is the case of
+the Asus K7V, A7V and A7V133 motherboards, to name only a few of them.
+So, if you need the force_addr parameter, and end up with values which
+don't seem to make any sense, don't look any further: your chip is simply
+not wired for hardware monitoring.
diff --git a/Documentation/i2c/busses/i2c-i810 b/Documentation/i2c/busses/i2c-i810
index 0544eb3..83c3b97 100644
--- a/Documentation/i2c/busses/i2c-i810
+++ b/Documentation/i2c/busses/i2c-i810
@@ -2,6 +2,7 @@
Supported adapters:
* Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH)
+ * Intel 82845G (GMCH)
Authors:
Frodo Looijaard <frodol@dds.nl>,
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 702f5ac..9363b8b 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -4,17 +4,18 @@
* VIA Technologies, Inc. VT82C596A/B
Datasheet: Sometimes available at the VIA website
- * VIA Technologies, Inc. VT82C686A/B
+ * VIA Technologies, Inc. VT82C686A/B
Datasheet: Sometimes available at the VIA website
* VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237
Datasheet: available on request from Via
Authors:
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Kyösti Mälkki <kmalkki@cc.hut.fi>,
- Mark D. Studebaker <mdsxyz123@yahoo.com>
+ Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
+ Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ Mark D. Studebaker <mdsxyz123@yahoo.com>,
+ Jean Delvare <khali@linux-fr.org>
Module Parameters
-----------------
@@ -28,20 +29,22 @@
-----------
i2c-viapro is a true SMBus host driver for motherboards with one of the
-supported VIA southbridges.
+supported VIA south bridges.
Your lspci -n listing must show one of these :
- device 1106:3050 (VT82C596 function 3)
- device 1106:3051 (VT82C596 function 3)
+ device 1106:3050 (VT82C596A function 3)
+ device 1106:3051 (VT82C596B function 3)
device 1106:3057 (VT82C686 function 4)
device 1106:3074 (VT8233)
device 1106:3147 (VT8233A)
- device 1106:8235 (VT8231)
- devide 1106:3177 (VT8235)
- devide 1106:3227 (VT8237)
+ device 1106:8235 (VT8231 function 4)
+ device 1106:3177 (VT8235)
+ device 1106:3227 (VT8237R)
If none of these show up, you should look in the BIOS for settings like
enable ACPI / SMBus or even USB.
-
+Except for the oldest chips (VT82C596A/B, VT82C686A and most probably
+VT8231), this driver supports I2C block transactions. Such transactions
+are mainly useful to read from and write to EEPROMs.
diff --git a/Documentation/i2c/chips/x1205 b/Documentation/i2c/chips/x1205
new file mode 100644
index 0000000..09407c9
--- /dev/null
+++ b/Documentation/i2c/chips/x1205
@@ -0,0 +1,38 @@
+Kernel driver x1205
+===================
+
+Supported chips:
+ * Xicor X1205 RTC
+ Prefix: 'x1205'
+ Addresses scanned: none
+ Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
+
+Authors:
+ Karen Spearel <kas11@tampabay.rr.com>,
+ Alessandro Zummo <a.zummo@towertech.it>
+
+Description
+-----------
+
+This module aims to provide complete access to the Xicor X1205 RTC.
+Recently Xicor has merged with Intersil, but the chip is
+still sold under the Xicor brand.
+
+This chip is located at address 0x6f and uses a 2-byte register addressing.
+Two bytes need to be written to read a single register, while most
+other chips just require one and take the second one as the data
+to be written. To prevent corrupting unknown chips, the user must
+explicitely set the probe parameter.
+
+example:
+
+modprobe x1205 probe=0,0x6f
+
+The module supports one more option, hctosys, which is used to set the
+software clock from the x1205. On systems where the x1205 is the
+only hardware rtc, this parameter could be used to achieve a correct
+date/time earlier in the system boot sequence.
+
+example:
+
+modprobe x1205 probe=0,0x6f hctosys=1
diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality
index 41ffefb..60cca24 100644
--- a/Documentation/i2c/functionality
+++ b/Documentation/i2c/functionality
@@ -17,9 +17,10 @@
I2C_FUNC_I2C Plain i2c-level commands (Pure SMBus
adapters typically can not do these)
I2C_FUNC_10BIT_ADDR Handles the 10-bit address extensions
- I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_REV_DIR_ADDR,
- I2C_M_REV_DIR_ADDR and I2C_M_REV_DIR_NOSTART
- flags (which modify the i2c protocol!)
+ I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_IGNORE_NAK,
+ I2C_M_REV_DIR_ADDR, I2C_M_NOSTART and
+ I2C_M_NO_RD_ACK flags (which modify the
+ I2C protocol!)
I2C_FUNC_SMBUS_QUICK Handles the SMBus write_quick command
I2C_FUNC_SMBUS_READ_BYTE Handles the SMBus read_byte command
I2C_FUNC_SMBUS_WRITE_BYTE Handles the SMBus write_byte command
diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients
index 4849dfd..184fac2 100644
--- a/Documentation/i2c/porting-clients
+++ b/Documentation/i2c/porting-clients
@@ -82,7 +82,7 @@
exit and exit_free. For i2c+isa drivers, labels should be named
ERROR0, ERROR1 and ERROR2. Don't forget to properly set err before
jumping to error labels. By the way, labels should be left-aligned.
- Use memset to fill the client and data area with 0x00.
+ Use kzalloc instead of kmalloc.
Use i2c_set_clientdata to set the client data (as opposed to
a direct access to client->data).
Use strlcpy instead of strcpy to copy the client name.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 0772757..e94d9c6 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -33,8 +33,8 @@
.command = &foo_command /* may be NULL */
}
-The name can be chosen freely, and may be upto 40 characters long. Please
-use something descriptive here.
+The name field must match the driver name, including the case. It must not
+contain spaces, and may be up to 31 characters long.
Don't worry about the flags field; just put I2C_DF_NOTIFY into it. This
means that your driver will be notified when new adapters are found.
@@ -43,9 +43,6 @@
All other fields are for call-back functions which will be explained
below.
-There use to be two additional fields in this structure, inc_use et dec_use,
-for module usage count, but these fields were obsoleted and removed.
-
Extra client data
=================
@@ -58,6 +55,7 @@
An example structure is below.
struct foo_data {
+ struct i2c_client client;
struct semaphore lock; /* For ISA access in `sensors' drivers. */
int sysctl_id; /* To keep the /proc directory entry for
`sensors' drivers. */
@@ -310,22 +308,15 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access several i2c functions safely */
- /* Note that we reserve some space for foo_data too. If you don't
- need it, remove it. We do it here to help to lessen memory
- fragmentation. */
- if (! (new_client = kmalloc(sizeof(struct i2c_client) +
- sizeof(struct foo_data),
- GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct foo_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
- /* This is tricky, but it will set the data to the right value. */
- client->data = new_client + 1;
- data = (struct foo_data *) (client->data);
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
new_client->addr = address;
- new_client->data = data;
new_client->adapter = adapter;
new_client->driver = &foo_driver;
new_client->flags = 0;
@@ -451,7 +442,7 @@
release_region(client->addr,LM78_EXTENT);
/* HYBRID SENSORS CHIP ONLY END */
- kfree(client); /* Frees client data too, if allocated at the same time */
+ kfree(data);
return 0;
}
@@ -576,12 +567,12 @@
extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
u8 command, u8 length,
u8 *values);
+ extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
+ u8 command, u8 *values);
These ones were removed in Linux 2.6.10 because they had no users, but could
be added back later if needed:
- extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
- u8 command, u8 *values);
extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
u8 command, u8 *values);
extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
diff --git a/MAINTAINERS b/MAINTAINERS
index 900bd58..a51d9cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -197,6 +197,15 @@
W: http://linux.thorsten-knabe.de
S: Maintained
+AD1889 SOUND DRIVER
+P: Kyle McMartin
+M: kyle@parisc-linux.org
+P: Thibaut Varene
+M: T-Bone@parisc-linux.org
+W: http://wiki.parisc-linux.org/AD1889
+L: parisc-linux@lists.parisc-linux.org
+S: Maintained
+
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
@@ -2735,6 +2744,12 @@
M: rl@hellgate.ch
S: Maintained
+VIAPRO SMBUS DRIVER
+P: Jean Delvare
+M: khali@linux-fr.org
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
UCLINUX (AND M68KNOMMU)
P: Greg Ungerer
M: gerg@uclinux.org
diff --git a/Makefile b/Makefile
index f1d121f..7960132 100644
--- a/Makefile
+++ b/Makefile
@@ -371,8 +371,8 @@
# Files to ignore in find ... statements
-RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
-export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
# ===========================================================================
# Rules shared between *config targets and build targets
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 11fff04..682367b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -204,6 +204,7 @@
config ARCH_AAEC2000
bool "Agilent AAEC-2000 based"
+ select ARM_AMBA
help
This enables support for systems based on the Agilent AAEC-2000
@@ -687,7 +688,8 @@
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+ || MACH_MP1000
source "drivers/ide/Kconfig"
endif
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 7c7f475..a54d2eb 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -39,7 +39,8 @@
defined(CONFIG_ARCH_IXP4XX) || \
defined(CONFIG_ARCH_IXP2000) || \
defined(CONFIG_ARCH_LH7A40X) || \
- defined(CONFIG_ARCH_OMAP)
+ defined(CONFIG_ARCH_OMAP) || \
+ defined(CONFIG_MACH_MP1000)
.macro loadsp, rb
addruart \rb
.endm
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index e8053d1..5cdb412 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -550,15 +550,12 @@
u16 LCM_SPIMD;
};
-static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
+static int locomo_suspend(struct device *dev, pm_message_t state)
{
struct locomo *lchip = dev_get_drvdata(dev);
struct locomo_save_data *save;
unsigned long flags;
- if (level != SUSPEND_DISABLE)
- return 0;
-
save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
if (!save)
return -ENOMEM;
@@ -597,16 +594,13 @@
return 0;
}
-static int locomo_resume(struct device *dev, u32 level)
+static int locomo_resume(struct device *dev)
{
struct locomo *lchip = dev_get_drvdata(dev);
struct locomo_save_data *save;
unsigned long r;
unsigned long flags;
- if (level != RESUME_ENABLE)
- return 0;
-
save = (struct locomo_save_data *) dev->power.saved_state;
if (!save)
return 0;
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 1a47fbf9c..21e2a51 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -801,7 +801,7 @@
#ifdef CONFIG_PM
-static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sa1111_suspend(struct device *dev, pm_message_t state)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save;
@@ -809,9 +809,6 @@
unsigned int val;
void __iomem *base;
- if (level != SUSPEND_DISABLE)
- return 0;
-
save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
if (!save)
return -ENOMEM;
@@ -856,23 +853,19 @@
/*
* sa1111_resume - Restore the SA1111 device state.
* @dev: device to restore
- * @level: resume level
*
* Restore the general state of the SA1111; clock control and
* interrupt controller. Other parts of the SA1111 must be
* restored by their respective drivers, and must be called
* via LDM after this function.
*/
-static int sa1111_resume(struct device *dev, u32 level)
+static int sa1111_resume(struct device *dev)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save;
unsigned long flags, id;
void __iomem *base;
- if (level != RESUME_ENABLE)
- return 0;
-
save = (struct sa1111_save_data *)dev->power.saved_state;
if (!save)
return 0;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 9e5245c..e8356b7 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -102,26 +102,24 @@
}
#ifdef CONFIG_PM
-static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int scoop_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- struct scoop_dev *sdev = dev_get_drvdata(dev);
+ struct scoop_dev *sdev = dev_get_drvdata(dev);
- check_scoop_reg(sdev);
- sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
- SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
- }
+ check_scoop_reg(sdev);
+ sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
+ SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
+
return 0;
}
-static int scoop_resume(struct device *dev, uint32_t level)
+static int scoop_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- struct scoop_dev *sdev = dev_get_drvdata(dev);
+ struct scoop_dev *sdev = dev_get_drvdata(dev);
- check_scoop_reg(sdev);
- SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
- }
+ check_scoop_reg(sdev);
+ SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
+
return 0;
}
#else
diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/mp1000_defconfig
new file mode 100644
index 0000000..d2cbc6f
--- /dev/null
+++ b/arch/arm/configs/mp1000_defconfig
@@ -0,0 +1,897 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc1
+# Fri Sep 16 15:48:13 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+CONFIG_ARCH_CLPS711X=y
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# CLPS711X/EP721X Implementations
+#
+# CONFIG_ARCH_AUTCPU12 is not set
+# CONFIG_ARCH_CDB89712 is not set
+# CONFIG_ARCH_CEIVA is not set
+# CONFIG_ARCH_CLEP7312 is not set
+# CONFIG_ARCH_EDB7211 is not set
+# CONFIG_ARCH_P720T is not set
+# CONFIG_ARCH_FORTUNET is not set
+CONFIG_MACH_MP1000=y
+CONFIG_MP1000_90MHZ=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM720T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_LV4T=y
+CONFIG_CPU_CACHE_V4=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WT=y
+CONFIG_CPU_TLB_V4WT=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_SMP is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=m
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x0000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_EDB7312=m
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_MP1000=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+CONFIG_IDE_ARM=y
+CONFIG_BLK_DEV_IDE_MP1000=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_CS89x0=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CLPS711X=y
+CONFIG_SERIAL_CLPS711X_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_NVRAM=y
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_WAITQ=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_CLPS711X_UART2 is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 1a85cfd..6055e14 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -11,6 +11,7 @@
*/
#include <linux/config.h>
#include <linux/module.h>
+#include <linux/moduleloader.h>
#include <linux/kernel.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f6de76e..baa0960 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -345,7 +345,9 @@
struct thread_info *thread = current_thread_info();
siginfo_t info;
- if (current->personality != PER_LINUX && thread->exec_domain->handler) {
+ if (current->personality != PER_LINUX &&
+ current->personality != PER_LINUX_32BIT &&
+ thread->exec_domain->handler) {
thread->exec_domain->handler(n, regs);
return regs->ARM_r0;
}
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 8725d63..71e5b99 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -11,7 +11,7 @@
strnlen_user.o strchr.o strrchr.o testchangebit.o \
testclearbit.o testsetbit.o uaccess.o getuser.o \
putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
- ucmpdi2.o lib1funcs.o div64.o \
+ ucmpdi2.o lib1funcs.o div64.o sha1.o \
io-readsb.o io-writesb.o io-readsl.o io-writesl.o
ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
new file mode 100644
index 0000000..ff6ece4
--- /dev/null
+++ b/arch/arm/lib/sha1.S
@@ -0,0 +1,206 @@
+/*
+ * linux/arch/arm/lib/sha1.S
+ *
+ * SHA transform optimized for ARM
+ *
+ * Copyright: (C) 2005 by Nicolas Pitre <nico@cam.org>
+ * Created: September 17, 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The reference implementation for this code is linux/lib/sha1.c
+ */
+
+#include <linux/linkage.h>
+
+ .text
+
+
+/*
+ * void sha_transform(__u32 *digest, const char *in, __u32 *W)
+ *
+ * Note: the "in" ptr may be unaligned.
+ */
+
+ENTRY(sha_transform)
+
+ stmfd sp!, {r4 - r8, lr}
+
+ @ for (i = 0; i < 16; i++)
+ @ W[i] = be32_to_cpu(in[i]); */
+
+#ifdef __ARMEB__
+ mov r4, r0
+ mov r0, r2
+ mov r2, #64
+ bl memcpy
+ mov r2, r0
+ mov r0, r4
+#else
+ mov r3, r2
+ mov lr, #16
+1: ldrb r4, [r1], #1
+ ldrb r5, [r1], #1
+ ldrb r6, [r1], #1
+ ldrb r7, [r1], #1
+ subs lr, lr, #1
+ orr r5, r5, r4, lsl #8
+ orr r6, r6, r5, lsl #8
+ orr r7, r7, r6, lsl #8
+ str r7, [r3], #4
+ bne 1b
+#endif
+
+ @ for (i = 0; i < 64; i++)
+ @ W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31);
+
+ sub r3, r2, #4
+ mov lr, #64
+2: ldr r4, [r3, #4]!
+ subs lr, lr, #1
+ ldr r5, [r3, #8]
+ ldr r6, [r3, #32]
+ ldr r7, [r3, #52]
+ eor r4, r4, r5
+ eor r4, r4, r6
+ eor r4, r4, r7
+ mov r4, r4, ror #31
+ str r4, [r3, #64]
+ bne 2b
+
+ /*
+ * The SHA functions are:
+ *
+ * f1(B,C,D) = (D ^ (B & (C ^ D)))
+ * f2(B,C,D) = (B ^ C ^ D)
+ * f3(B,C,D) = ((B & C) | (D & (B | C)))
+ *
+ * Then the sub-blocks are processed as follows:
+ *
+ * A' = ror(A, 27) + f(B,C,D) + E + K + *W++
+ * B' = A
+ * C' = ror(B, 2)
+ * D' = C
+ * E' = D
+ *
+ * We therefore unroll each loop 5 times to avoid register shuffling.
+ * Also the ror for C (and also D and E which are successivelyderived
+ * from it) is applied in place to cut on an additional mov insn for
+ * each round.
+ */
+
+ .macro sha_f1, A, B, C, D, E
+ ldr r3, [r2], #4
+ eor ip, \C, \D
+ add \E, r1, \E, ror #2
+ and ip, \B, ip, ror #2
+ add \E, \E, \A, ror #27
+ eor ip, ip, \D, ror #2
+ add \E, \E, r3
+ add \E, \E, ip
+ .endm
+
+ .macro sha_f2, A, B, C, D, E
+ ldr r3, [r2], #4
+ add \E, r1, \E, ror #2
+ eor ip, \B, \C, ror #2
+ add \E, \E, \A, ror #27
+ eor ip, ip, \D, ror #2
+ add \E, \E, r3
+ add \E, \E, ip
+ .endm
+
+ .macro sha_f3, A, B, C, D, E
+ ldr r3, [r2], #4
+ add \E, r1, \E, ror #2
+ orr ip, \B, \C, ror #2
+ add \E, \E, \A, ror #27
+ and ip, ip, \D, ror #2
+ add \E, \E, r3
+ and r3, \B, \C, ror #2
+ orr ip, ip, r3
+ add \E, \E, ip
+ .endm
+
+ ldmia r0, {r4 - r8}
+
+ mov lr, #4
+ ldr r1, .L_sha_K + 0
+
+ /* adjust initial values */
+ mov r6, r6, ror #30
+ mov r7, r7, ror #30
+ mov r8, r8, ror #30
+
+3: subs lr, lr, #1
+ sha_f1 r4, r5, r6, r7, r8
+ sha_f1 r8, r4, r5, r6, r7
+ sha_f1 r7, r8, r4, r5, r6
+ sha_f1 r6, r7, r8, r4, r5
+ sha_f1 r5, r6, r7, r8, r4
+ bne 3b
+
+ ldr r1, .L_sha_K + 4
+ mov lr, #4
+
+4: subs lr, lr, #1
+ sha_f2 r4, r5, r6, r7, r8
+ sha_f2 r8, r4, r5, r6, r7
+ sha_f2 r7, r8, r4, r5, r6
+ sha_f2 r6, r7, r8, r4, r5
+ sha_f2 r5, r6, r7, r8, r4
+ bne 4b
+
+ ldr r1, .L_sha_K + 8
+ mov lr, #4
+
+5: subs lr, lr, #1
+ sha_f3 r4, r5, r6, r7, r8
+ sha_f3 r8, r4, r5, r6, r7
+ sha_f3 r7, r8, r4, r5, r6
+ sha_f3 r6, r7, r8, r4, r5
+ sha_f3 r5, r6, r7, r8, r4
+ bne 5b
+
+ ldr r1, .L_sha_K + 12
+ mov lr, #4
+
+6: subs lr, lr, #1
+ sha_f2 r4, r5, r6, r7, r8
+ sha_f2 r8, r4, r5, r6, r7
+ sha_f2 r7, r8, r4, r5, r6
+ sha_f2 r6, r7, r8, r4, r5
+ sha_f2 r5, r6, r7, r8, r4
+ bne 6b
+
+ ldmia r0, {r1, r2, r3, ip, lr}
+ add r4, r1, r4
+ add r5, r2, r5
+ add r6, r3, r6, ror #2
+ add r7, ip, r7, ror #2
+ add r8, lr, r8, ror #2
+ stmia r0, {r4 - r8}
+
+ ldmfd sp!, {r4 - r8, pc}
+
+.L_sha_K:
+ .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
+
+
+/*
+ * void sha_init(__u32 *buf)
+ */
+
+.L_sha_initial_digest:
+ .word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
+
+ENTRY(sha_init)
+
+ str lr, [sp, #-4]!
+ adr r1, .L_sha_initial_digest
+ ldmia r1, {r1, r2, r3, ip, lr}
+ stmia r0, {r1, r2, r3, ip, lr}
+ ldr pc, [sp], #4
+
diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile
index 20ec838..a8e462f 100644
--- a/arch/arm/mach-aaec2000/Makefile
+++ b/arch/arm/mach-aaec2000/Makefile
@@ -3,7 +3,7 @@
#
# Common support (must be linked before board specific support)
-obj-y += core.o
+obj-y += core.o clock.o
# Specific board support
obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index c9d8998..f5ef697 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -27,16 +27,65 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <asm/arch/aaed2000.h>
+
#include "core.h"
+static void aaed2000_clcd_disable(struct clcd_fb *fb)
+{
+ AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
+}
+
+static void aaed2000_clcd_enable(struct clcd_fb *fb)
+{
+ AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
+}
+
+struct aaec2000_clcd_info clcd_info = {
+ .enable = aaed2000_clcd_enable,
+ .disable = aaed2000_clcd_disable,
+ .panel = {
+ .mode = {
+ .name = "Sharp",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39721,
+ .left_margin = 20,
+ .right_margin = 44,
+ .upper_margin = 21,
+ .lower_margin = 34,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IVS | TIM2_IHS,
+ .cntl = CNTL_LCDTFT,
+ .bpp = 16,
+ },
+};
+
static void __init aaed2000_init_irq(void)
{
aaec2000_init_irq();
}
+static void __init aaed2000_init(void)
+{
+ aaec2000_set_clcd_plat_data(&clcd_info);
+}
+
+static struct map_desc aaed2000_io_desc[] __initdata = {
+ { EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */
+};
+
static void __init aaed2000_map_io(void)
{
aaec2000_map_io();
+ iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc));
}
MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
@@ -47,4 +96,5 @@
.map_io = aaed2000_map_io,
.init_irq = aaed2000_init_irq,
.timer = &aaec2000_timer,
+ .init_machine = aaed2000_init,
MACHINE_END
diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c
new file mode 100644
index 0000000..99e0191
--- /dev/null
+++ b/arch/arm/mach-aaec2000/clock.c
@@ -0,0 +1,110 @@
+/*
+ * linux/arch/arm/mach-aaec2000/clock.c
+ *
+ * Copyright (C) 2005 Nicolas Bellido Y Ortega
+ *
+ * Based on linux/arch/arm/mach-integrator/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/semaphore.h>
+#include <asm/hardware/clock.h>
+
+#include "clock.h"
+
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+ down(&clocks_sem);
+ list_for_each_entry(p, &clocks, node) {
+ if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ up(&clocks_sem);
+
+ return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+ module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_use(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_unuse);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_register(struct clk *clk)
+{
+ down(&clocks_sem);
+ list_add(&clk->node, &clocks);
+ up(&clocks_sem);
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ down(&clocks_sem);
+ list_del(&clk->node);
+ up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static int __init clk_init(void)
+{
+ return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-aaec2000/clock.h b/arch/arm/mach-aaec2000/clock.h
new file mode 100644
index 0000000..d4bb74f
--- /dev/null
+++ b/arch/arm/mach-aaec2000/clock.h
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-aaec2000/clock.h
+ *
+ * Copyright (C) 2005 Nicolas Bellido Y Ortega
+ *
+ * Based on linux/arch/arm/mach-integrator/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct module;
+
+struct clk {
+ struct list_head node;
+ unsigned long rate;
+ struct module *owner;
+ const char *name;
+ void *data;
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index aece0cd..0c53dab 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -13,19 +13,27 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
+#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/signal.h>
#include <asm/hardware.h>
#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/hardware/amba.h>
+#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
+#include "core.h"
+#include "clock.h"
+
/*
* Common I/O mapping:
*
@@ -40,9 +48,17 @@
* default mapping provided here.
*/
static struct map_desc standard_io_desc[] __initdata = {
- /* virtual physical length type */
- { VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE },
- { VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE }
+ {
+ .virtual = VIO_APB_BASE,
+ .physical = __phys_to_pfn(PIO_APB_BASE),
+ .length = IO_APB_LENGTH,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VIO_AHB_BASE,
+ .physical = __phys_to_pfn(PIO_AHB_BASE),
+ .length = IO_AHB_LENGTH,
+ .type = MT_DEVICE
+ }
};
void __init aaec2000_map_io(void)
@@ -155,3 +171,116 @@
.offset = aaec2000_gettimeoffset,
};
+static struct clcd_panel mach_clcd_panel;
+
+static int aaec2000_clcd_setup(struct clcd_fb *fb)
+{
+ dma_addr_t dma;
+
+ fb->panel = &mach_clcd_panel;
+
+ fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
+ &dma, GFP_KERNEL);
+
+ if (!fb->fb.screen_base) {
+ printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+ return -ENOMEM;
+ }
+
+ fb->fb.fix.smem_start = dma;
+ fb->fb.fix.smem_len = SZ_1M;
+
+ return 0;
+}
+
+static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ return dma_mmap_writecombine(&fb->dev->dev, vma,
+ fb->fb.screen_base,
+ fb->fb.fix.smem_start,
+ fb->fb.fix.smem_len);
+}
+
+static void aaec2000_clcd_remove(struct clcd_fb *fb)
+{
+ dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+ fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board clcd_plat_data = {
+ .name = "AAEC-2000",
+ .check = clcdfb_check,
+ .decode = clcdfb_decode,
+ .setup = aaec2000_clcd_setup,
+ .mmap = aaec2000_clcd_mmap,
+ .remove = aaec2000_clcd_remove,
+};
+
+static struct amba_device clcd_device = {
+ .dev = {
+ .bus_id = "mb:16",
+ .coherent_dma_mask = ~0,
+ .platform_data = &clcd_plat_data,
+ },
+ .res = {
+ .start = AAEC_CLCD_PHYS,
+ .end = AAEC_CLCD_PHYS + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { INT_LCD, NO_IRQ },
+ .periphid = 0x41110,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &clcd_device,
+};
+
+static struct clk aaec2000_clcd_clk = {
+ .name = "CLCDCLK",
+};
+
+void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
+{
+ clcd_plat_data.enable = clcd->enable;
+ clcd_plat_data.disable = clcd->disable;
+ memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
+}
+
+static struct flash_platform_data aaec2000_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 4,
+};
+
+static struct resource aaec2000_flash_resource = {
+ .start = AAEC_FLASH_BASE,
+ .end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device aaec2000_flash_device = {
+ .name = "armflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &aaec2000_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &aaec2000_flash_resource,
+};
+
+static int __init aaec2000_init(void)
+{
+ int i;
+
+ clk_register(&aaec2000_clcd_clk);
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+
+ platform_device_register(&aaec2000_flash_device);
+
+ return 0;
+};
+arch_initcall(aaec2000_init);
+
diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h
index 91893d8..daefc0e 100644
--- a/arch/arm/mach-aaec2000/core.h
+++ b/arch/arm/mach-aaec2000/core.h
@@ -9,8 +9,19 @@
*
*/
+#include <asm/hardware/amba_clcd.h>
+
struct sys_timer;
extern struct sys_timer aaec2000_timer;
extern void __init aaec2000_map_io(void);
extern void __init aaec2000_init_irq(void);
+
+struct aaec2000_clcd_info {
+ struct clcd_panel panel;
+ void (*disable)(struct clcd_fb *);
+ void (*enable)(struct clcd_fb *);
+};
+
+extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *);
+
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 0793dcf..d5c1550 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -69,6 +69,17 @@
You almost surely want to say N here.
+config MACH_MP1000
+ bool "MACH_MP1000"
+ help
+ Say Y if you intend to run the kernel on the Comdial MP1000 platform.
+
+config MP1000_90MHZ
+ bool "MP1000_90MHZ"
+ depends on MACH_MP1000
+ help
+ Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ
+
endmenu
endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 4a19731..8a6dc1c 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -15,6 +15,7 @@
obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
+obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o
obj-$(CONFIG_ARCH_P720T) += p720t.o
leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
obj-$(CONFIG_LEDS) += $(leds-y)
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index dc73feb..43b9423 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -46,10 +46,14 @@
*/
static struct map_desc autcpu12_io_desc[] __initdata = {
- /* virtual, physical, length, type */
- /* memory-mapped extra io and CS8900A Ethernet chip */
- /* ethernet chip */
- { AUTCPU12_VIRT_CS8900A, AUTCPU12_PHYS_CS8900A, SZ_1M, MT_DEVICE }
+ /* memory-mapped extra io and CS8900A Ethernet chip */
+ /* ethernet chip */
+ {
+ .virtual = AUTCPU12_VIRT_CS8900A,
+ .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
void __init autcpu12_map_io(void)
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index a46c82c..cba7be5 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -39,7 +39,12 @@
* ethernet driver, perhaps.
*/
static struct map_desc cdb89712_io_desc[] __initdata = {
- { ETHER_BASE, ETHER_START, ETHER_SIZE, MT_DEVICE }
+ {
+ .virtual = ETHER_BASE,
+ .pfn =__phys_to_pfn(ETHER_START),
+ .length = ETHER_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init cdb89712_map_io(void)
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 780d918..35d51a7 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -37,11 +37,13 @@
#include "common.h"
static struct map_desc ceiva_io_desc[] __initdata = {
- /* virtual, physical, length, type */
-
- /* SED1355 controlled video RAM & registers */
- { CEIVA_VIRT_SED1355, CEIVA_PHYS_SED1355, SZ_2M, MT_DEVICE }
-
+ /* SED1355 controlled video RAM & registers */
+ {
+ .virtual = CEIVA_VIRT_SED1355,
+ .pfn = __phys_to_pfn(CEIVA_PHYS_SED1355),
+ .length = SZ_2M,
+ .type = MT_DEVICE
+ }
};
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 7fd7b01..72f8bb0 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -51,15 +51,27 @@
* happens).
*/
static struct map_desc edb7211_io_desc[] __initdata = {
- /* virtual, physical, length, type */
-
- /* memory-mapped extra keyboard row and CS8900A Ethernet chip */
- { EP7211_VIRT_EXTKBD, EP7211_PHYS_EXTKBD, SZ_1M, MT_DEVICE },
- { EP7211_VIRT_CS8900A, EP7211_PHYS_CS8900A, SZ_1M, MT_DEVICE },
-
- /* flash banks */
- { EP7211_VIRT_FLASH1, EP7211_PHYS_FLASH1, SZ_8M, MT_DEVICE },
- { EP7211_VIRT_FLASH2, EP7211_PHYS_FLASH2, SZ_8M, MT_DEVICE }
+ { /* memory-mapped extra keyboard row */
+ .virtual = EP7211_VIRT_EXTKBD,
+ .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD),
+ .length = SZ_1M,
+ .type - MT_DEVICE
+ }, { /* and CS8900A Ethernet chip */
+ .virtual = EP7211_VIRT_CS8900A,
+ .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }, { /* flash banks */
+ .virtual = EP7211_VIRT_FLASH1,
+ .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1),
+ .length = SZ_8M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = EP7211_VIRT_FLASH2,
+ .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2),
+ .length = SZ_8M,
+ .type = MT_DEVICE
+ }
};
void __init edb7211_map_io(void)
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index 120b7ca..a00f77ef 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <asm/sizes.h>
#include <asm/hardware.h>
#include <asm/pgtable.h>
#include <asm/page.h>
@@ -34,7 +35,12 @@
* This maps the generic CLPS711x registers
*/
static struct map_desc clps711x_io_desc[] __initdata = {
- { CLPS7111_VIRT_BASE, CLPS7111_PHYS_BASE, 1048576, MT_DEVICE }
+ {
+ .virtual = CLPS7111_VIRT_BASE,
+ .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
void __init clps711x_map_io(void)
diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c
new file mode 100644
index 0000000..c2816bc
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-mach.c
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/mach-mp1000/mp1000.c
+ *
+ * Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/arch/mp1000-seprom.h>
+
+#include "common.h"
+
+extern void mp1000_map_io(void);
+
+static void __init mp1000_init(void)
+{
+ seprom_init();
+}
+
+MACHINE_START(MP1000, "Comdial MP1000")
+ /* Maintainer: Jon Ringle */
+ .phys_ram = 0xc0000000,
+ .phys_io = 0x80000000,
+ .io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
+ .boot_params = 0xc0015100,
+ .map_io = mp1000_map_io,
+ .init_irq = clps711x_init_irq,
+ .init_machine = mp1000_init,
+ .timer = &clps711x_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c
new file mode 100644
index 0000000..20e810b
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-mm.c
@@ -0,0 +1,47 @@
+/*
+ * linux/arch/arm/mach-mp1000/mm.c
+ *
+ * Extra MM routines for the MP1000
+ *
+ * Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/map.h>
+
+extern void clps711x_map_io(void);
+
+static struct map_desc mp1000_io_desc[] __initdata = {
+ { MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE },
+ { MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE },
+ { MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE },
+ { MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE },
+ { MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE },
+ { MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE }
+};
+
+void __init mp1000_map_io(void)
+{
+ clps711x_map_io();
+ iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc));
+}
diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c
new file mode 100644
index 0000000..b22d0be
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-seprom.c
@@ -0,0 +1,195 @@
+/*`
+ * mp1000-seprom.c
+ *
+ * This file contains the Serial EEPROM code for the MP1000 board
+ *
+ * Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/hardware.h>
+#include <asm/hardware/clps7111.h>
+#include <asm/arch/mp1000-seprom.h>
+
+/* If SepromInit() can initialize and checksum the seprom successfully, */
+/* then it will point seprom_data_ptr at the shadow copy. */
+
+static eeprom_struct seprom_data; /* shadow copy of seprom content */
+
+eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */
+
+/*
+ * Port D Bit 5 is Chip Select for EEPROM
+ * Port E Bit 0 is Input, Data out from EEPROM
+ * Port E Bit 1 is Output, Data in to EEPROM
+ * Port E Bit 2 is Output, CLK to EEPROM
+ */
+
+static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR);
+static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR);
+
+#define NO_OF_SHORTS 64 // Device is 64 x 16 bits
+#define ENABLE_RW 0
+#define DISABLE_RW 1
+
+static inline void toggle_seprom_clock(void)
+{
+ *port_e_ptr |= HwPortESepromCLK;
+ *port_e_ptr &= ~(HwPortESepromCLK);
+}
+
+static inline void select_eeprom(void)
+{
+ *port_d_ptr |= HwPortDEECS;
+ *port_e_ptr &= ~(HwPortESepromCLK);
+}
+
+static inline void deselect_eeprom(void)
+{
+ *port_d_ptr &= ~(HwPortDEECS);
+ *port_e_ptr &= ~(HwPortESepromDIn);
+}
+
+/*
+ * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom
+ * and returns 0 if seprom is not initialized or
+ * has a checksum error.
+ */
+
+eeprom_struct* get_seprom_ptr(void)
+{
+ return seprom_data_ptr;
+}
+
+unsigned char* get_eeprom_mac_address(void)
+{
+ return seprom_data_ptr->variant.eprom_struct.mac_Address;
+}
+
+/*
+ * ReadSProm, Physically reads data from the Serial PROM
+ */
+static void read_sprom(short address, int length, eeprom_struct *buffer)
+{
+ short data = COMMAND_READ | (address & 0x3F);
+ short bit;
+ int i;
+
+ select_eeprom();
+
+ // Clock in 9 bits of the command
+ for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) {
+ if (data & bit)
+ *port_e_ptr |= HwPortESepromDIn;
+ else
+ *port_e_ptr &= ~(HwPortESepromDIn);
+
+ toggle_seprom_clock();
+ }
+
+ //
+ // Now read one or more shorts of data from the Seprom
+ //
+ while (length-- > 0) {
+ data = 0;
+
+ // Read 16 bits at a time
+ for (i = 0; i < 16; i++) {
+ data <<= 1;
+ toggle_seprom_clock();
+ data |= *port_e_ptr & HwPortESepromDOut;
+
+ }
+
+ buffer->variant.eprom_short_data[address++] = data;
+ }
+
+ deselect_eeprom();
+
+ return;
+}
+
+
+
+/*
+ * ReadSerialPROM
+ *
+ * Input: Pointer to array of 64 x 16 Bits
+ *
+ * Output: if no problem reading data is filled in
+ */
+static void read_serial_prom(eeprom_struct *data)
+{
+ read_sprom(0, 64, data);
+}
+
+
+//
+// Compute Serial EEPROM checksum
+//
+// Input: Pointer to struct with Eprom data
+//
+// Output: The computed Eprom checksum
+//
+static short compute_seprom_checksum(eeprom_struct *data)
+{
+ short checksum = 0;
+ int i;
+
+ for (i = 0; i < 126; i++) {
+ checksum += (short)data->variant.eprom_byte_data[i];
+ }
+
+ return((short)(0x5555 - (checksum & 0xFFFF)));
+}
+
+//
+// Make sure the data port bits for the SEPROM are correctly initialised
+//
+
+void __init seprom_init(void)
+{
+ short checksum;
+
+ // Init Port D
+ *(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0;
+ *(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15;
+
+ // Init Port E
+ *(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06;
+ *(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04;
+
+ //
+ // Make sure that EEPROM struct size never exceeds 128 bytes
+ //
+ if (sizeof(eeprom_struct) > 128) {
+ panic("Serial PROM struct size > 128, aborting read\n");
+ }
+
+ read_serial_prom(&seprom_data);
+
+ checksum = compute_seprom_checksum(&seprom_data);
+
+ if (checksum != seprom_data.variant.eprom_short_data[63]) {
+ panic("Serial EEPROM checksum failed\n");
+ }
+
+ seprom_data_ptr = &seprom_data;
+}
+
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 5bdb90e..a1acb94 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -29,6 +29,7 @@
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/setup.h>
+#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -42,8 +43,17 @@
* We map both here.
*/
static struct map_desc p720t_io_desc[] __initdata = {
- { SYSPLD_VIRT_BASE, SYSPLD_PHYS_BASE, 1048576, MT_DEVICE },
- { 0xfe400000, 0x10400000, 1048576, MT_DEVICE }
+ {
+ .virtual = SYSPLD_VIRT_BASE,
+ .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = 0xfe400000,
+ .pfn = __phys_to_pfn(0x10400000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
static void __init
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index e216ab8..0364ba4 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -259,10 +259,27 @@
}
static struct map_desc cl7500_io_desc[] __initdata = {
- { IO_BASE, IO_START, IO_SIZE, MT_DEVICE }, /* IO space */
- { ISA_BASE, ISA_START, ISA_SIZE, MT_DEVICE }, /* ISA space */
- { FLASH_BASE, FLASH_START, FLASH_SIZE, MT_DEVICE }, /* Flash */
- { LED_BASE, LED_START, LED_SIZE, MT_DEVICE } /* LED */
+ { /* IO space */
+ .virtual = IO_BASE,
+ .pfn = __phys_to_pfn(IO_START),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }, { /* ISA space */
+ .virtual = ISA_BASE,
+ .pfn = __phys_to_pfn(ISA_START),
+ .length = ISA_SIZE,
+ .type = MT_DEVICE
+ }, { /* Flash */
+ .virtual = FLASH_BASE,
+ .pfn = __phys_to_pfn(FLASH_START),
+ .length = FLASH_SIZE,
+ .type = MT_DEVICE
+ }, { /* LED */
+ .virtual = LED_BASE,
+ .pfn = __phys_to_pfn(LED_START),
+ .length = LED_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init clps7500_map_io(void)
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 5aeadfd..1526164 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -76,16 +76,42 @@
/*
* sparse external-decode ISAIO space
*/
- { IRQ_STAT, TRICK4_PHYS, PGDIR_SIZE, MT_DEVICE }, /* IRQ_STAT/IRQ_MCLR */
- { IRQ_MASK, TRICK3_PHYS, PGDIR_SIZE, MT_DEVICE }, /* IRQ_MASK/IRQ_MSET */
- { SOFT_BASE, TRICK1_PHYS, PGDIR_SIZE, MT_DEVICE }, /* SOFT_BASE */
- { PIT_BASE, TRICK0_PHYS, PGDIR_SIZE, MT_DEVICE }, /* PIT_BASE */
+ { /* IRQ_STAT/IRQ_MCLR */
+ .virtual = IRQ_STAT,
+ .pfn = __phys_to_pfn(TRICK4_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ }, { /* IRQ_MASK/IRQ_MSET */
+ .virtual = IRQ_MASK,
+ .pfn = __phys_to_pfn(TRICK3_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ }, { /* SOFT_BASE */
+ .virtual = SOFT_BASE,
+ .pfn = __phys_to_pfn(TRICK1_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ }, { /* PIT_BASE */
+ .virtual = PIT_BASE,
+ .pfn = __phys_to_pfn(TRICK0_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ },
/*
* self-decode ISAIO space
*/
- { ISAIO_BASE, ISAIO_PHYS, ISAIO_SIZE, MT_DEVICE },
- { ISAMEM_BASE, ISAMEM_PHYS, ISAMEM_SIZE, MT_DEVICE }
+ {
+ .virtual = ISAIO_BASE,
+ .pfn = __phys_to_pfn(ISAIO_PHYS),
+ .length = ISAIO_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = ISAMEM_BASE,
+ .pfn = __phys_to_pfn(ISAMEM_PHYS),
+ .length = ISAMEM_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init ebsa110_map_io(void)
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index ef7eb5d..c648bfb 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -24,6 +24,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/page.h>
diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c
index 2aa57fa..e8832d0 100644
--- a/arch/arm/mach-epxa10db/mm.c
+++ b/arch/arm/mach-epxa10db/mm.c
@@ -31,12 +31,37 @@
/* Page table mapping for I/O region */
static struct map_desc epxa10db_io_desc[] __initdata = {
- { IO_ADDRESS(EXC_REGISTERS_BASE), EXC_REGISTERS_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK0_BASE), EXC_PLD_BLOCK0_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK1_BASE), EXC_PLD_BLOCK1_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK2_BASE), EXC_PLD_BLOCK2_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK3_BASE), EXC_PLD_BLOCK3_BASE, SZ_16K, MT_DEVICE },
- { FLASH_VADDR(EXC_EBI_BLOCK0_BASE), EXC_EBI_BLOCK0_BASE, SZ_16M, MT_DEVICE }
+ {
+ .virtual = IO_ADDRESS(EXC_REGISTERS_BASE),
+ .pfn = __phys_to_pfn(EXC_REGISTERS_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK0_BASE),
+ .pfn = __phys_to_pfn(EXC_PLD_BLOCK0_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK1_BASE),
+ .pfn =__phys_to_pfn(EXC_PLD_BLOCK1_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK2_BASE),
+ .physical = __phys_to_pfn(EXC_PLD_BLOCK2_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK3_BASE),
+ .pfn = __phys_to_pfn(EXC_PLD_BLOCK3_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = FLASH_VADDR(EXC_EBI_BLOCK0_BASE),
+ .pfn = __phys_to_pfn(EXC_EBI_BLOCK0_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }
};
void __init epxa10db_map_io(void)
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index eb8238c..dc09fd2 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -130,8 +130,17 @@
* it means that we have extra bullet protection on our feet.
*/
static struct map_desc fb_common_io_desc[] __initdata = {
- { ARMCSR_BASE, DC21285_ARMCSR_BASE, ARMCSR_SIZE, MT_DEVICE },
- { XBUS_BASE, 0x40000000, XBUS_SIZE, MT_DEVICE }
+ {
+ .virtual = ARMCSR_BASE,
+ .pfn = DC21285_ARMCSR_BASE,
+ .length = ARMCSR_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = XBUS_BASE,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = XBUS_SIZE,
+ .type = MT_DEVICE
+ }
};
/*
@@ -140,11 +149,32 @@
*/
static struct map_desc ebsa285_host_io_desc[] __initdata = {
#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
- { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE },
- { PCICFG0_BASE, DC21285_PCI_TYPE_0_CONFIG, PCICFG0_SIZE, MT_DEVICE },
- { PCICFG1_BASE, DC21285_PCI_TYPE_1_CONFIG, PCICFG1_SIZE, MT_DEVICE },
- { PCIIACK_BASE, DC21285_PCI_IACK, PCIIACK_SIZE, MT_DEVICE },
- { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE }
+ {
+ .virtual = PCIMEM_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_MEM),
+ .length = PCIMEM_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCICFG0_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG),
+ .length = PCICFG0_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCICFG1_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG),
+ .length = PCICFG1_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCIIACK_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_IACK),
+ .length = PCIIACK_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCIO_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_IO),
+ .length = PCIO_SIZE,
+ .type = MT_DEVICE
+ }
#endif
};
@@ -153,8 +183,17 @@
*/
static struct map_desc co285_io_desc[] __initdata = {
#ifdef CONFIG_ARCH_CO285
- { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE },
- { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE }
+ {
+ .virtual = PCIO_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_IO),
+ .length = PCIO_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCIMEM_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_MEM),
+ .length = PCIMEM_SIZE,
+ .type = MT_DEVICE
+ }
#endif
};
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 5110e2e..c096b45 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -237,7 +237,12 @@
}
static struct map_desc h720x_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
};
/* Initialize io tables */
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index f8a742b..cb14b06 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -273,8 +273,12 @@
};
static struct map_desc imx_io_desc[] __initdata = {
- /* virtual physical length type */
- {IMX_IO_BASE, IMX_IO_PHYS, IMX_IO_SIZE, MT_DEVICE},
+ {
+ .virtual = IMX_IO_BASE,
+ .pfn = __phys_to_pfn(IMX_IO_PHYS),
+ .length = IMX_IO_SIZE,
+ .type = MT_DEVICE
+ }
};
void __init
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index a7511dd..4cbdc1f 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -61,13 +61,37 @@
}
static struct map_desc mx1ads_io_desc[] __initdata = {
- /* virtual physical length type */
- {IMX_CS0_VIRT, IMX_CS0_PHYS, IMX_CS0_SIZE, MT_DEVICE},
- {IMX_CS1_VIRT, IMX_CS1_PHYS, IMX_CS1_SIZE, MT_DEVICE},
- {IMX_CS2_VIRT, IMX_CS2_PHYS, IMX_CS2_SIZE, MT_DEVICE},
- {IMX_CS3_VIRT, IMX_CS3_PHYS, IMX_CS3_SIZE, MT_DEVICE},
- {IMX_CS4_VIRT, IMX_CS4_PHYS, IMX_CS4_SIZE, MT_DEVICE},
- {IMX_CS5_VIRT, IMX_CS5_PHYS, IMX_CS5_SIZE, MT_DEVICE},
+ {
+ .virtual = IMX_CS0_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS0_PHYS),
+ .length = IMX_CS0_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS1_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS1_PHYS),
+ .length = IMX_CS1_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS2_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS2_PHYS),
+ .length = IMX_CS2_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS3_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS3_PHYS),
+ .length = IMX_CS3_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS4_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS4_PHYS),
+ .length = IMX_CS4_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS5_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS5_PHYS),
+ .length = IMX_CS5_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 36e2b6e..f368b85 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -75,19 +75,72 @@
*/
static struct map_desc ap_io_desc[] __initdata = {
- { IO_ADDRESS(INTEGRATOR_HDR_BASE), INTEGRATOR_HDR_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_SC_BASE), INTEGRATOR_SC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_EBI_BASE), INTEGRATOR_EBI_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_CT_BASE), INTEGRATOR_CT_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_IC_BASE), INTEGRATOR_IC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE },
- { PCI_MEMORY_VADDR, PHYS_PCI_MEM_BASE, SZ_16M, MT_DEVICE },
- { PCI_CONFIG_VADDR, PHYS_PCI_CONFIG_BASE, SZ_16M, MT_DEVICE },
- { PCI_V3_VADDR, PHYS_PCI_V3_BASE, SZ_64K, MT_DEVICE },
- { PCI_IO_VADDR, PHYS_PCI_IO_BASE, SZ_64K, MT_DEVICE }
+ {
+ .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_MEMORY_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_CONFIG_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_V3_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_V3_BASE),
+ .length = SZ_64K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_IO_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_IO_BASE),
+ .length = SZ_64K,
+ .type = MT_DEVICE
+ }
};
static void __init ap_map_io(void)
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 2be5c03..aa34c58 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -74,17 +74,62 @@
*/
static struct map_desc intcp_io_desc[] __initdata = {
- { IO_ADDRESS(INTEGRATOR_HDR_BASE), INTEGRATOR_HDR_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_SC_BASE), INTEGRATOR_SC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_EBI_BASE), INTEGRATOR_EBI_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_CT_BASE), INTEGRATOR_CT_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_IC_BASE), INTEGRATOR_IC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE },
- { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE },
- { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = 0xfca00000,
+ .pfn = __phys_to_pfn(0xca000000),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = 0xfcb00000,
+ .pfn = __phys_to_pfn(0xcb000000),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }
};
static void __init intcp_map_io(void)
diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c
index 0f921ba..bb50912 100644
--- a/arch/arm/mach-iop3xx/iop321-setup.c
+++ b/arch/arm/mach-iop3xx/iop321-setup.c
@@ -38,13 +38,17 @@
* Standard IO mapping for all IOP321 based systems
*/
static struct map_desc iop321_std_desc[] __initdata = {
- /* virtual physical length type */
-
- /* mem mapped registers */
- { IOP321_VIRT_MEM_BASE, IOP321_PHYS_MEM_BASE, 0x00002000, MT_DEVICE },
-
- /* PCI IO space */
- { IOP321_PCI_LOWER_IO_VA, IOP321_PCI_LOWER_IO_PA, IOP321_PCI_IO_WINDOW_SIZE, MT_DEVICE }
+ { /* mem mapped registers */
+ .virtual = IOP321_VIRT_MEM_BASE,
+ .pfn = __phys_to_pfn(IOP321_PHYS_MEM_BASE),
+ .length = 0x00002000,
+ .type = MT_DEVICE
+ }, { /* PCI IO space */
+ .virtual = IOP321_PCI_LOWER_IO_VA,
+ .pfn = __phys_to_pfn(IOP321_PCI_LOWER_IO_PA),
+ .length = IOP321_PCI_IO_WINDOW_SIZE,
+ .type = MT_DEVICE
+ }
};
#ifdef CONFIG_ARCH_IQ80321
diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c
index fc74b72..a2533c3 100644
--- a/arch/arm/mach-iop3xx/iop331-setup.c
+++ b/arch/arm/mach-iop3xx/iop331-setup.c
@@ -37,13 +37,17 @@
* Standard IO mapping for all IOP331 based systems
*/
static struct map_desc iop331_std_desc[] __initdata = {
- /* virtual physical length type */
-
- /* mem mapped registers */
- { IOP331_VIRT_MEM_BASE, IOP331_PHYS_MEM_BASE, 0x00002000, MT_DEVICE },
-
- /* PCI IO space */
- { IOP331_PCI_LOWER_IO_VA, IOP331_PCI_LOWER_IO_PA, IOP331_PCI_IO_WINDOW_SIZE, MT_DEVICE }
+ { /* mem mapped registers */
+ .virtual = IOP331_VIRT_MEM_BASE,
+ .pfn = __phys_to_pfn(IOP331_PHYS_MEM_BASE),
+ .length = 0x00002000,
+ .type = MT_DEVICE
+ }, { /* PCI IO space */
+ .virtual = IOP331_PCI_LOWER_IO_VA,
+ .pfn = __phys_to_pfn(IOP331_PCI_LOWER_IO_PA),
+ .length = IOP331_PCI_IO_WINDOW_SIZE,
+ .type = MT_DEVICE
+ }
};
static struct uart_port iop331_serial_ports[] = {
diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c
index 55992ab..e874b54 100644
--- a/arch/arm/mach-iop3xx/iq31244-mm.c
+++ b/arch/arm/mach-iop3xx/iq31244-mm.c
@@ -29,10 +29,12 @@
* We use RedBoot's setup for the onboard devices.
*/
static struct map_desc iq31244_io_desc[] __initdata = {
- /* virtual physical length type */
-
- /* on-board devices */
- { IQ31244_UART, IQ31244_UART, 0x00100000, MT_DEVICE }
+ { /* on-board devices */
+ .virtual = IQ31244_UART,
+ .pfn = __phys_to_pfn(IQ31244_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
void __init iq31244_map_io(void)
diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c
index bb3e9e5..d9cac5e 100644
--- a/arch/arm/mach-iop3xx/iq80321-mm.c
+++ b/arch/arm/mach-iop3xx/iq80321-mm.c
@@ -29,10 +29,12 @@
* We use RedBoot's setup for the onboard devices.
*/
static struct map_desc iq80321_io_desc[] __initdata = {
- /* virtual physical length type */
-
- /* on-board devices */
- { IQ80321_UART, IQ80321_UART, 0x00100000, MT_DEVICE }
+ { /* on-board devices */
+ .virtual = IQ80321_UART,
+ .pfn = __phys_to_pfn(IQ80321_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
void __init iq80321_map_io(void)
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index f4d7f1f..01c393c 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -83,42 +83,42 @@
static struct map_desc ixp2000_io_desc[] __initdata = {
{
.virtual = IXP2000_CAP_VIRT_BASE,
- .physical = IXP2000_CAP_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
.length = IXP2000_CAP_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_INTCTL_VIRT_BASE,
- .physical = IXP2000_INTCTL_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
.length = IXP2000_INTCTL_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CREG_VIRT_BASE,
- .physical = IXP2000_PCI_CREG_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
.length = IXP2000_PCI_CREG_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CSR_VIRT_BASE,
- .physical = IXP2000_PCI_CSR_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
.length = IXP2000_PCI_CSR_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_MSF_VIRT_BASE,
- .physical = IXP2000_MSF_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
.length = IXP2000_MSF_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_IO_VIRT_BASE,
- .physical = IXP2000_PCI_IO_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
.length = IXP2000_PCI_IO_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CFG0_VIRT_BASE,
- .physical = IXP2000_PCI_CFG0_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
.length = IXP2000_PCI_CFG0_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CFG1_VIRT_BASE,
- .physical = IXP2000_PCI_CFG1_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
.length = IXP2000_PCI_CFG1_SIZE,
.type = MT_DEVICE
}
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 63ba019..8b4a839 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -176,7 +176,7 @@
*************************************************************************/
static struct map_desc ixdp2x00_io_desc __initdata = {
.virtual = IXDP2X00_VIRT_CPLD_BASE,
- .physical = IXDP2X00_PHYS_CPLD_BASE,
+ .pfn = __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE),
.length = IXDP2X00_CPLD_SIZE,
.type = MT_DEVICE
};
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 7a51099..fee1d7b 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -136,7 +136,7 @@
*************************************************************************/
static struct map_desc ixdp2x01_io_desc __initdata = {
.virtual = IXDP2X01_VIRT_CPLD_BASE,
- .physical = IXDP2X01_PHYS_CPLD_BASE,
+ .pfn = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
.length = IXDP2X01_CPLD_REGION_SIZE,
.type = MT_DEVICE
};
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 36b6045..6c39644 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -44,24 +44,24 @@
static struct map_desc ixp4xx_io_desc[] __initdata = {
{ /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
.virtual = IXP4XX_PERIPHERAL_BASE_VIRT,
- .physical = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
.length = IXP4XX_PERIPHERAL_REGION_SIZE,
.type = MT_DEVICE
}, { /* Expansion Bus Config Registers */
.virtual = IXP4XX_EXP_CFG_BASE_VIRT,
- .physical = IXP4XX_EXP_CFG_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
.length = IXP4XX_EXP_CFG_REGION_SIZE,
.type = MT_DEVICE
}, { /* PCI Registers */
.virtual = IXP4XX_PCI_CFG_BASE_VIRT,
- .physical = IXP4XX_PCI_CFG_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
.length = IXP4XX_PCI_CFG_REGION_SIZE,
.type = MT_DEVICE
},
#ifdef CONFIG_DEBUG_LL
{ /* Debug UART mapping */
.virtual = IXP4XX_DEBUG_UART_BASE_VIRT,
- .physical = IXP4XX_DEBUG_UART_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
.length = IXP4XX_DEBUG_UART_REGION_SIZE,
.type = MT_DEVICE
}
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index cb3dcd3..19f2fa2 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -26,8 +26,17 @@
/* This function calls the board specific IRQ initialization function. */
static struct map_desc kev7a400_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
- { CPLD_VIRT, CPLD_PHYS, CPLD_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD_VIRT,
+ .pfn = __phys_to_pfn(CPLD_PHYS),
+ .length = CPLD_SIZE,
+ .type = MT_DEVICE
+ }
};
void __init kev7a400_map_io(void)
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index 6eb61a1..a20eabc 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -227,23 +227,79 @@
}
static struct map_desc lpd7a400_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
- /* Mapping added to work around chip select problems */
- { IOBARRIER_VIRT, IOBARRIER_PHYS, IOBARRIER_SIZE, MT_DEVICE },
- { CF_VIRT, CF_PHYS, CF_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }, { /* Mapping added to work around chip select problems */
+ .virtual = IOBARRIER_VIRT,
+ .pfn = __phys_to_pfn(IOBARRIER_PHYS),
+ .length = IOBARRIER_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CF_VIRT,
+ .pfn = __phys_to_pfn(CF_PHYS),
+ .length = CF_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD02_VIRT,
+ .pfn = __phys_to_pfn(CPLD02_PHYS),
+ .length = CPLD02_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD06_VIRT,
+ .pfn = __phys_to_pfn(CPLD06_PHYS),
+ .length = CPLD06_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD08_VIRT,
+ .pfn = __phys_to_pfn(CPLD08_PHYS),
+ .length = CPLD08_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD0C_VIRT,
+ .pfn = __phys_to_pfn(CPLD0C_PHYS),
+ .length = CPLD0C_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD0E_VIRT,
+ .pfn = __phys_to_pfn(CPLD0E_PHYS),
+ .length = CPLD0E_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD10_VIRT,
+ .pfn = __phys_to_pfn(CPLD10_PHYS),
+ .length = CPLD10_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD12_VIRT,
+ .pfn = __phys_to_pfn(CPLD12_PHYS),
+ .length = CPLD12_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD14_VIRT,
+ .pfn = __phys_to_pfn(CPLD14_PHYS),
+ .length = CPLD14_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD16_VIRT,
+ .pfn = __phys_to_pfn(CPLD16_PHYS),
+ .length = CPLD16_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD18_VIRT,
+ .pfn = __phys_to_pfn(CPLD18_PHYS),
+ .length = CPLD18_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD1A_VIRT,
+ .pfn = __phys_to_pfn(CPLD1A_PHYS),
+ .length = CPLD1A_SIZE,
+ .type = MT_DEVICE
+ },
/* This mapping is redundant since the smc driver performs another. */
/* { CPLD00_VIRT, CPLD00_PHYS, CPLD00_SIZE, MT_DEVICE }, */
- { CPLD02_VIRT, CPLD02_PHYS, CPLD02_SIZE, MT_DEVICE },
- { CPLD06_VIRT, CPLD06_PHYS, CPLD06_SIZE, MT_DEVICE },
- { CPLD08_VIRT, CPLD08_PHYS, CPLD08_SIZE, MT_DEVICE },
- { CPLD0C_VIRT, CPLD0C_PHYS, CPLD0C_SIZE, MT_DEVICE },
- { CPLD0E_VIRT, CPLD0E_PHYS, CPLD0E_SIZE, MT_DEVICE },
- { CPLD10_VIRT, CPLD10_PHYS, CPLD10_SIZE, MT_DEVICE },
- { CPLD12_VIRT, CPLD12_PHYS, CPLD12_SIZE, MT_DEVICE },
- { CPLD14_VIRT, CPLD14_PHYS, CPLD14_SIZE, MT_DEVICE },
- { CPLD16_VIRT, CPLD16_PHYS, CPLD16_SIZE, MT_DEVICE },
- { CPLD18_VIRT, CPLD18_PHYS, CPLD18_SIZE, MT_DEVICE },
- { CPLD1A_VIRT, CPLD1A_PHYS, CPLD1A_SIZE, MT_DEVICE },
};
void __init
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index df0312b..fd9183f 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -103,8 +103,12 @@
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc innovator1510_io_desc[] __initdata = {
-{ OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE,
- MT_DEVICE },
+ {
+ .virtual = OMAP1510_FPGA_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_FPGA_START),
+ .length = OMAP1510_FPGA_SIZE,
+ .type = MT_DEVICE
+ }
};
static struct resource innovator1510_smc91x_resources[] = {
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 107c68c..2ba26e2 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -134,8 +134,12 @@
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {
- {H2P2_DBG_FPGA_BASE, H2P2_DBG_FPGA_START, H2P2_DBG_FPGA_SIZE,
- MT_DEVICE},
+ {
+ .virtual = H2P2_DBG_FPGA_BASE,
+ .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
+ .length = H2P2_DBG_FPGA_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init omap_perseus2_map_io(void)
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index eb8261d..79fb865 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -26,27 +26,59 @@
* default mapping provided here.
*/
static struct map_desc omap_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }
};
#ifdef CONFIG_ARCH_OMAP730
static struct map_desc omap730_io_desc[] __initdata = {
- { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE },
- { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
+ {
+ .virtual = OMAP730_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP730_DSP_START),
+ .length = OMAP730_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP730_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP730_DSPREG_START),
+ .length = OMAP730_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
#ifdef CONFIG_ARCH_OMAP1510
static struct map_desc omap1510_io_desc[] __initdata = {
- { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE },
- { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
+ {
+ .virtual = OMAP1510_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_DSP_START),
+ .length = OMAP1510_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP1510_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_DSPREG_START),
+ .length = OMAP1510_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
static struct map_desc omap16xx_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
+ {
+ .virtual = OMAP16XX_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP16XX_DSP_START),
+ .length = OMAP16XX_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP16XX_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP16XX_DSPREG_START),
+ .length = OMAP16XX_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 0ef4282..136c269 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -222,24 +222,22 @@
return 0;
}
-static int corgi_ssp_suspend(struct device *dev, pm_message_t state, u32 level)
+static int corgi_ssp_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- ssp_flush(&corgi_ssp_dev);
- ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
- }
+ ssp_flush(&corgi_ssp_dev);
+ ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
+
return 0;
}
-static int corgi_ssp_resume(struct device *dev, u32 level)
+static int corgi_ssp_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
- GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
- GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
- ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
- ssp_enable(&corgi_ssp_dev);
- }
+ GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
+ GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
+ GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
+ ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
+ ssp_enable(&corgi_ssp_dev);
+
return 0;
}
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 1d767766..3248bc9 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -34,6 +34,7 @@
#include <asm/arch/udc.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
#include <asm/arch/i2c.h>
#include "generic.h"
@@ -92,14 +93,42 @@
* and cache flush area.
*/
static struct map_desc standard_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf2000000, 0x40000000, 0x02000000, MT_DEVICE }, /* Devs */
- { 0xf4000000, 0x44000000, 0x00100000, MT_DEVICE }, /* LCD */
- { 0xf6000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Mem Ctl */
- { 0xf8000000, 0x4c000000, 0x00100000, MT_DEVICE }, /* USB host */
- { 0xfa000000, 0x50000000, 0x00100000, MT_DEVICE }, /* Camera */
- { 0xfe000000, 0x58000000, 0x00100000, MT_DEVICE }, /* IMem ctl */
- { 0xff000000, 0x00000000, 0x00100000, MT_DEVICE } /* UNCACHED_PHYS_0 */
+ { /* Devs */
+ .virtual = 0xf2000000,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = 0x02000000,
+ .type = MT_DEVICE
+ }, { /* LCD */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x44000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* Mem Ctl */
+ .virtual = 0xf6000000,
+ .pfn = __phys_to_pfn(0x48000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* USB host */
+ .virtual = 0xf8000000,
+ .pfn = __phys_to_pfn(0x4c000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* Camera */
+ .virtual = 0xfa000000,
+ .pfn = __phys_to_pfn(0x50000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* IMem ctl */
+ .virtual = 0xfe000000,
+ .pfn = __phys_to_pfn(0x58000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* UNCACHED_PHYS_0 */
+ .virtual = 0xff000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
void __init pxa_map_io(void)
@@ -225,6 +254,10 @@
.name = "pxa2xx-uart",
.id = 2,
};
+static struct platform_device hwuart_device = {
+ .name = "pxa2xx-uart",
+ .id = 3,
+};
static struct resource i2c_resources[] = {
{
@@ -265,10 +298,26 @@
static struct platform_device i2s_device = {
.name = "pxa2xx-i2s",
.id = -1,
- .resource = i2c_resources,
+ .resource = i2s_resources,
.num_resources = ARRAY_SIZE(i2s_resources),
};
+static u64 pxaficp_dmamask = ~(u32)0;
+
+static struct platform_device pxaficp_device = {
+ .name = "pxa2xx-ir",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxaficp_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
+{
+ pxaficp_device.dev.platform_data = info;
+}
+
static struct platform_device *devices[] __initdata = {
&pxamci_device,
&udc_device,
@@ -276,13 +325,26 @@
&ffuart_device,
&btuart_device,
&stuart_device,
+ &pxaficp_device,
&i2c_device,
&i2s_device,
};
static int __init pxa_init(void)
{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
+ int cpuid, ret;
+
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (ret)
+ return ret;
+
+ /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
+ cpuid = read_cpuid(CPUID_ID);
+ if (((cpuid >> 4) & 0xfff) == 0x2d0 ||
+ ((cpuid >> 4) & 0xfff) == 0x290)
+ ret = platform_device_register(&hwuart_device);
+
+ return ret;
}
subsys_initcall(pxa_init);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 386e107..01a83ab 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -152,16 +152,17 @@
}
static struct map_desc idp_io_desc[] __initdata = {
- /* virtual physical length type */
-
- { IDP_COREVOLT_VIRT,
- IDP_COREVOLT_PHYS,
- IDP_COREVOLT_SIZE,
- MT_DEVICE },
- { IDP_CPLD_VIRT,
- IDP_CPLD_PHYS,
- IDP_CPLD_SIZE,
- MT_DEVICE }
+ {
+ .virtual = IDP_COREVOLT_VIRT,
+ .pfn = __phys_to_pfn(IDP_COREVOLT_PHYS),
+ .length = IDP_COREVOLT_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IDP_CPLD_VIRT,
+ .pfn = __phys_to_pfn(IDP_CPLD_PHYS),
+ .length = IDP_CPLD_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init idp_map_io(void)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1f38033..beccf45 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -35,6 +35,7 @@
#include <asm/arch/pxa-regs.h>
#include <asm/arch/lubbock.h>
#include <asm/arch/udc.h>
+#include <asm/arch/irda.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/mmc.h>
@@ -237,16 +238,40 @@
.init = lubbock_mci_init,
};
+static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (mode & IR_SIRMODE) {
+ LUB_MISC_WR &= ~(1 << 4);
+ } else if (mode & IR_FIRMODE) {
+ LUB_MISC_WR |= 1 << 4;
+ }
+ local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data lubbock_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
+ .transceiver_mode = lubbock_irda_transceiver_mode,
+};
+
static void __init lubbock_init(void)
{
pxa_set_udc_info(&udc_info);
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
+ pxa_set_ficp_info(&lubbock_ficp_platform_data);
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
}
static struct map_desc lubbock_io_desc[] __initdata = {
- { LUBBOCK_FPGA_VIRT, LUBBOCK_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */
+ { /* CPLD */
+ .virtual = LUBBOCK_FPGA_VIRT,
+ .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init lubbock_map_io(void)
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 85fdb5b..a48c640 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -37,6 +37,7 @@
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
#include "generic.h"
@@ -294,6 +295,29 @@
.exit = mainstone_mci_exit,
};
+static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (mode & IR_SIRMODE) {
+ MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
+ } else if (mode & IR_FIRMODE) {
+ MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
+ }
+ if (mode & IR_OFF) {
+ MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
+ } else {
+ MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
+ }
+ local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data mainstone_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = mainstone_irda_transceiver_mode,
+};
+
static void __init mainstone_init(void)
{
/*
@@ -313,11 +337,17 @@
set_pxa_fb_info(&toshiba_ltm035a776c);
pxa_set_mci_info(&mainstone_mci_platform_data);
+ pxa_set_ficp_info(&mainstone_ficp_platform_data);
}
static struct map_desc mainstone_io_desc[] __initdata = {
- { MST_FPGA_VIRT, MST_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */
+ { /* CPLD */
+ .virtual = MST_FPGA_VIRT,
+ .pfn = __phys_to_pfn(MST_FPGA_PHYS),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init mainstone_map_io(void)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 7869c3b..573a575 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -129,7 +129,7 @@
case PM_SUSPEND_MEM:
/* set resume return address */
PSPR = virt_to_phys(pxa_cpu_resume);
- pxa_cpu_suspend(3);
+ pxa_cpu_suspend(PWRMODE_SLEEP);
break;
}
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 9a791b0..09a5d59 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -157,7 +157,7 @@
case PM_SUSPEND_MEM:
/* set resume return address */
PSPR = virt_to_phys(pxa_cpu_resume);
- pxa_cpu_suspend(3);
+ pxa_cpu_suspend(PWRMODE_SLEEP);
break;
}
}
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 5786cca..c986268 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -28,7 +28,9 @@
/*
* pxa_cpu_suspend()
*
- * Forces CPU into sleep state
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
*/
ENTRY(pxa_cpu_suspend)
@@ -53,6 +55,7 @@
mov r10, sp
stmfd sp!, {r3 - r10}
+ mov r5, r0 @ save sleep mode
@ preserve phys address of stack
mov r0, sp
bl sleep_phys_sp
@@ -66,7 +69,7 @@
@ (also workaround for sighting 28071)
@ prepare value for sleep mode
- mov r1, #3 @ sleep mode
+ mov r1, r5 @ sleep mode
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
mov r2, #UNCACHED_PHYS_0
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 8a3f27b..6f6dbbd 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -21,7 +21,7 @@
ENTRY(pxa_cpu_standby)
ldr r0, =PSSR
mov r1, #(PSSR_PH | PSSR_STS)
- mov r2, #2
+ mov r2, #PWRMODE_STANDBY
mov r3, #UNCACHED_PHYS_0 @ Read mem context in.
ldr ip, [r3]
b 1f
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index e3587ef..5c4ac1c0 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -61,9 +61,22 @@
__tagtable(ATAG_ACORN, parse_tag_acorn);
static struct map_desc rpc_io_desc[] __initdata = {
- { SCREEN_BASE, SCREEN_START, 2*1048576, MT_DEVICE }, /* VRAM */
- { (u32)IO_BASE, IO_START, IO_SIZE , MT_DEVICE }, /* IO space */
- { EASI_BASE, EASI_START, EASI_SIZE, MT_DEVICE } /* EASI space */
+ { /* VRAM */
+ .virtual = SCREEN_BASE,
+ .pfn = __phys_to_pfn(SCREEN_START),
+ .length = 2*1048576,
+ .type = MT_DEVICE
+ }, { /* IO space */
+ .virtual = (u32)IO_BASE,
+ .pfn = __phys_to_pfn(IO_START),
+ .length = IO_SIZE ,
+ .type = MT_DEVICE
+ }, { /* EASI space */
+ .virtual = EASI_BASE,
+ .pfn = __phys_to_pfn(EASI_START),
+ .length = EASI_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init rpc_map_io(void)
diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h
index 478c15c..9cbe5ee 100644
--- a/arch/arm/mach-s3c2410/cpu.h
+++ b/arch/arm/mach-s3c2410/cpu.h
@@ -21,7 +21,7 @@
/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, S3C2410_PA_##x, S3C24XX_SZ_##x, MT_DEVICE }
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
#define MHZ (1000*1000)
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index 0077937..08bc7d9 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -47,7 +47,7 @@
static struct resource s3c_usb_resource[] = {
[0] = {
.start = S3C2410_PA_USBHOST,
- .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST,
+ .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -77,7 +77,7 @@
static struct resource s3c_lcd_resource[] = {
[0] = {
.start = S3C2410_PA_LCD,
- .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD,
+ .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -103,21 +103,25 @@
EXPORT_SYMBOL(s3c_device_lcd);
-static struct s3c2410fb_mach_info s3c2410fb_info;
-
-void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info)
+void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
{
- memcpy(&s3c2410fb_info,hard_s3c2410fb_info,sizeof(struct s3c2410fb_mach_info));
- s3c_device_lcd.dev.platform_data = &s3c2410fb_info;
+ struct s3c2410fb_mach_info *npd;
+
+ npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+ if (npd) {
+ memcpy(npd, pd, sizeof(*npd));
+ s3c_device_lcd.dev.platform_data = npd;
+ } else {
+ printk(KERN_ERR "no memory for LCD platform data\n");
+ }
}
-EXPORT_SYMBOL(set_s3c2410fb_info);
/* NAND Controller */
static struct resource s3c_nand_resource[] = {
[0] = {
.start = S3C2410_PA_NAND,
- .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND,
+ .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -136,7 +140,7 @@
static struct resource s3c_usbgadget_resource[] = {
[0] = {
.start = S3C2410_PA_USBDEV,
- .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV,
+ .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -161,7 +165,7 @@
static struct resource s3c_wdt_resource[] = {
[0] = {
.start = S3C2410_PA_WATCHDOG,
- .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG,
+ .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -186,7 +190,7 @@
static struct resource s3c_i2c_resource[] = {
[0] = {
.start = S3C2410_PA_IIC,
- .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC,
+ .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -211,7 +215,7 @@
static struct resource s3c_iis_resource[] = {
[0] = {
.start = S3C2410_PA_IIS,
- .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS,
+ .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1,
.flags = IORESOURCE_MEM,
}
};
@@ -265,7 +269,7 @@
static struct resource s3c_adc_resource[] = {
[0] = {
.start = S3C2410_PA_ADC,
- .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC,
+ .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -288,7 +292,7 @@
static struct resource s3c_sdi_resource[] = {
[0] = {
.start = S3C2410_PA_SDI,
- .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI,
+ .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -465,7 +469,7 @@
static struct resource s3c_camif_resource[] = {
[0] = {
.start = S3C2440_PA_CAMIF,
- .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF,
+ .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 94f1776..23ea3d5 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -30,6 +30,7 @@
* 04-Oct-2004 BJD Added irq filter controls for GPIO
* 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code
* 13-Mar-2005 BJD Updates for __iomem
+ * 26-Oct-2005 BJD Added generic configuration types
*/
@@ -58,6 +59,27 @@
mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
}
+ switch (function) {
+ case S3C2410_GPIO_LEAVE:
+ mask = 0;
+ function = 0;
+ break;
+
+ case S3C2410_GPIO_INPUT:
+ case S3C2410_GPIO_OUTPUT:
+ case S3C2410_GPIO_SFN2:
+ case S3C2410_GPIO_SFN3:
+ if (pin < S3C2410_GPIO_BANKB) {
+ function &= 1;
+ function <<= S3C2410_GPIO_OFFSET(pin);
+ } else {
+ function &= 3;
+ function <<= S3C2410_GPIO_OFFSET(pin)*2;
+ }
+ }
+
+ /* modify the specified register wwith IRQs off */
+
local_irq_save(flags);
con = __raw_readl(base + 0x00);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 7b51bfd..c1b5c63 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -32,6 +32,7 @@
* 25-Jul-2005 BJD Removed ASIX static mappings
* 27-Jul-2005 BJD Ensure maximum frequency of i2c bus
* 20-Sep-2005 BJD Added static to non-exported items
+ * 26-Oct-2005 BJD Added FB platform data
*/
#include <linux/kernel.h>
@@ -61,8 +62,10 @@
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-lcd.h>
+
#include <asm/arch/nand.h>
#include <asm/arch/iic.h>
+#include <asm/arch/fb.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -399,6 +402,38 @@
.max_freq = 130*1000,
};
+
+static struct s3c2410fb_mach_info __initdata bast_lcd_info = {
+ .width = 640,
+ .height = 480,
+
+ .xres = {
+ .min = 320,
+ .max = 1024,
+ .defval = 640,
+ },
+
+ .yres = {
+ .min = 240,
+ .max = 600,
+ .defval = 480,
+ },
+
+ .bpp = {
+ .min = 4,
+ .max = 16,
+ .defval = 8,
+ },
+
+ .regs = {
+ .lcdcon1 = 0x00000176,
+ .lcdcon2 = 0x1d77c7c2,
+ .lcdcon3 = 0x013a7f13,
+ .lcdcon4 = 0x00000057,
+ .lcdcon5 = 0x00014b02,
+ }
+};
+
/* Standard BAST devices */
static struct platform_device *bast_devices[] __initdata = {
@@ -454,6 +489,10 @@
usb_simtec_init();
}
+static void __init bast_init(void)
+{
+ s3c24xx_fb_set_platdata(&bast_lcd_info);
+}
MACHINE_START(BAST, "Simtec-BAST")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
@@ -463,5 +502,6 @@
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
+ .init_machine = bast_init,
.timer = &s3c24xx_timer,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index fb3cb012..7efeaaa 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,6 +25,7 @@
* 14-Jan-2005 BJD Added clock init
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 20-Sep-2005 BJD Added static to non-exported items
+ * 26-Oct-2005 BJD Changed name of fb init call
*/
#include <linux/kernel.h>
@@ -164,7 +165,7 @@
static void __init h1940_init(void)
{
- set_s3c2410fb_info(&h1940_lcdcfg);
+ s3c24xx_fb_set_platdata(&h1940_lcdcfg);
}
MACHINE_START(H1940, "IPAQ-H1940")
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index 722ef46..6950e61 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -19,6 +19,7 @@
* 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA
* 14-Mar-2005 BJD void __iomem fixes
* 20-Sep-2005 BJD Added static to non-exported items
+ * 26-Oct-2005 BJD Added framebuffer data
*/
#include <linux/kernel.h>
@@ -41,7 +42,10 @@
//#include <asm/debug-ll.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
#include "s3c2410.h"
#include "s3c2440.h"
@@ -86,6 +90,70 @@
}
};
+/* LCD driver info */
+
+static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x04),
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(7) |
+ S3C2410_LCDCON2_LINEVAL(319) |
+ S3C2410_LCDCON2_VFPD(6) |
+ S3C2410_LCDCON2_VSPW(3),
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(19) |
+ S3C2410_LCDCON3_HOZVAL(239) |
+ S3C2410_LCDCON3_HFPD(7),
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(3),
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+#if 0
+ /* currently setup by downloader */
+ .gpccon = 0xaa940659,
+ .gpccon_mask = 0xffffffff,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpdcon = 0xaa84aaa0,
+ .gpdcon_mask = 0xffffffff,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+#endif
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 240,
+ .height = 320,
+
+ .xres = {
+ .min = 240,
+ .max = 240,
+ .defval = 240,
+ },
+
+ .yres = {
+ .min = 320,
+ .max = 320,
+ .defval = 320,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
static struct platform_device *smdk2440_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
@@ -121,6 +189,8 @@
s3c2410_gpio_setpin(S3C2410_GPF6, 0);
s3c2410_gpio_setpin(S3C2410_GPF7, 0);
+ s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg);
+
s3c2410_pm_init();
}
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 24687f5..75efb5d 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -388,9 +388,17 @@
};
static struct map_desc assabet_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf1000000, 0x12000000, 0x00100000, MT_DEVICE }, /* Board Control Register */
- { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE } /* MQ200 */
+ { /* Board Control Register */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x12000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* MQ200 */
+ .virtual = 0xf2800000,
+ .pfn = __phys_to_pfn(0x4b800000),
+ .length = 0x00800000,
+ .type = MT_DEVICE
+ }
};
static void __init assabet_map_io(void)
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b6169cb..c92cebf 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -254,10 +254,22 @@
static struct map_desc badge4_io_desc[] __initdata = {
- /* virtual physical length type */
- {0xf1000000, 0x08000000, 0x00100000, MT_DEVICE },/* SRAM bank 1 */
- {0xf2000000, 0x10000000, 0x00100000, MT_DEVICE },/* SRAM bank 2 */
- {0xf4000000, 0x48000000, 0x00100000, MT_DEVICE } /* SA-1111 */
+ { /* SRAM bank 1 */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SRAM bank 2 */
+ .virtual = 0xf2000000,
+ .pfn = __phys_to_pfn(0x10000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SA-1111 */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x48000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 9484be7..23cb748 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -100,8 +100,12 @@
}
static struct map_desc cerf_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf0000000, 0x08000000, 0x00100000, MT_DEVICE } /* Crystal Ethernet Chip */
+ { /* Crystal Ethernet Chip */
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init cerf_map_io(void)
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 6ecab7e..7fd6e29c 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -171,9 +171,17 @@
}
static struct map_desc collie_io_desc[] __initdata = {
- /* virtual physical length type */
- {0xe8000000, 0x00000000, 0x02000000, MT_DEVICE}, /* 32M main flash (cs0) */
- {0xea000000, 0x08000000, 0x02000000, MT_DEVICE}, /* 32M boot flash (cs1) */
+ { /* 32M main flash (cs0) */
+ .virtual = 0xe8000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x02000000,
+ .type = MT_DEVICE
+ }, { /* 32M boot flash (cs1) */
+ .virtual = 0xea000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x02000000,
+ .type = MT_DEVICE
+ }
};
static void __init collie_map_io(void)
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 3f1e358..9361949 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -369,11 +369,27 @@
*/
static struct map_desc standard_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf8000000, 0x80000000, 0x00100000, MT_DEVICE }, /* PCM */
- { 0xfa000000, 0x90000000, 0x00100000, MT_DEVICE }, /* SCM */
- { 0xfc000000, 0xa0000000, 0x00100000, MT_DEVICE }, /* MER */
- { 0xfe000000, 0xb0000000, 0x00200000, MT_DEVICE } /* LCD + DMA */
+ { /* PCM */
+ .virtual = 0xf8000000,
+ .pfn = __phys_to_pfn(0x80000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SCM */
+ .virtual = 0xfa000000,
+ .pfn = __phys_to_pfn(0x90000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* MER */
+ .virtual = 0xfc000000,
+ .pfn = __phys_to_pfn(0xa0000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* LCD + DMA */
+ .virtual = 0xfe000000,
+ .pfn = __phys_to_pfn(0xb0000000),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ },
};
void __init sa1100_map_io(void)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index e7aa2681..e8352b7 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -223,10 +223,22 @@
}
static struct map_desc h3600_io_desc[] __initdata = {
- /* virtual physical length type */
- { H3600_BANK_2_VIRT, SA1100_CS2_PHYS, 0x02800000, MT_DEVICE }, /* static memory bank 2 CS#2 */
- { H3600_BANK_4_VIRT, SA1100_CS4_PHYS, 0x00800000, MT_DEVICE }, /* static memory bank 4 CS#4 */
- { H3600_EGPIO_VIRT, H3600_EGPIO_PHYS, 0x01000000, MT_DEVICE }, /* EGPIO 0 CS#5 */
+ { /* static memory bank 2 CS#2 */
+ .virtual = H3600_BANK_2_VIRT,
+ .pfn = __phys_to_pfn(SA1100_CS2_PHYS),
+ .length = 0x02800000,
+ .type = MT_DEVICE
+ }, { /* static memory bank 4 CS#4 */
+ .virtual = H3600_BANK_4_VIRT,
+ .pfn = __phys_to_pfn(SA1100_CS4_PHYS),
+ .length = 0x00800000,
+ .type = MT_DEVICE
+ }, { /* EGPIO 0 CS#5 */
+ .virtual = H3600_EGPIO_VIRT,
+ .pfn = __phys_to_pfn(H3600_EGPIO_PHYS),
+ .length = 0x01000000,
+ .type = MT_DEVICE
+ }
};
/*
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 502d65c..c922e04 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -57,8 +57,12 @@
*/
static struct map_desc hackkit_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xe8000000, 0x00000000, 0x01000000, MT_DEVICE } /* Flash bank 0 */
+ { /* Flash bank 0 */
+ .virtual = 0xe8000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x01000000,
+ .type = MT_DEVICE
+ },
};
static struct sa1100_port_fns hackkit_port_fns __initdata = {
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 2f49711..9c363bf 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -81,10 +81,22 @@
arch_initcall(jornada720_init);
static struct map_desc jornada720_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf0000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Epson registers */
- { 0xf1000000, 0x48200000, 0x00100000, MT_DEVICE }, /* Epson frame buffer */
- { 0xf4000000, 0x40000000, 0x00100000, MT_DEVICE } /* SA-1111 */
+ { /* Epson registers */
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0x48000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* Epson frame buffer */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x48200000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SA-1111 */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init jornada720_map_io(void)
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index ed6744d..8c9e3dd 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -31,9 +31,17 @@
}
static struct map_desc lart_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xe8000000, 0x00000000, 0x00400000, MT_DEVICE }, /* main flash memory */
- { 0xec000000, 0x08000000, 0x00400000, MT_DEVICE } /* main flash, alternative location */
+ { /* main flash memory */
+ .virtual = 0xe8000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x00400000,
+ .type = MT_DEVICE
+ }, { /* main flash, alternative location */
+ .virtual = 0xec000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x00400000,
+ .type = MT_DEVICE
+ }
};
static void __init lart_map_io(void)
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index fc06164..052e4ca 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -178,33 +178,27 @@
/*
* LDM power management.
*/
-static int neponset_suspend(struct device *dev, pm_message_t state, u32 level)
+static int neponset_suspend(struct device *dev, pm_message_t state)
{
/*
* Save state.
*/
- if (level == SUSPEND_SAVE_STATE ||
- level == SUSPEND_DISABLE ||
- level == SUSPEND_POWER_DOWN) {
- if (!dev->power.saved_state)
- dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
- if (!dev->power.saved_state)
- return -ENOMEM;
+ if (!dev->power.saved_state)
+ dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
+ if (!dev->power.saved_state)
+ return -ENOMEM;
- *(unsigned int *)dev->power.saved_state = NCR_0;
- }
+ *(unsigned int *)dev->power.saved_state = NCR_0;
return 0;
}
-static int neponset_resume(struct device *dev, u32 level)
+static int neponset_resume(struct device *dev)
{
- if (level == RESUME_RESTORE_STATE || level == RESUME_ENABLE) {
- if (dev->power.saved_state) {
- NCR_0 = *(unsigned int *)dev->power.saved_state;
- kfree(dev->power.saved_state);
- dev->power.saved_state = NULL;
- }
+ if (dev->power.saved_state) {
+ NCR_0 = *(unsigned int *)dev->power.saved_state;
+ kfree(dev->power.saved_state);
+ dev->power.saved_state = NULL;
}
return 0;
@@ -331,9 +325,17 @@
subsys_initcall(neponset_init);
static struct map_desc neponset_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf3000000, 0x10000000, SZ_1M, MT_DEVICE }, /* System Registers */
- { 0xf4000000, 0x40000000, SZ_1M, MT_DEVICE } /* SA-1111 */
+ { /* System Registers */
+ .virtual = 0xf3000000,
+ .pfn = __phys_to_pfn(0x10000000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }, { /* SA-1111 */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
void __init neponset_map_io(void)
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 07f6d5f..cfb6658e 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -60,11 +60,17 @@
EXPORT_SYMBOL(clear_cs3_bit);
static struct map_desc simpad_io_desc[] __initdata = {
- /* virtual physical length type */
- /* MQ200 */
- { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE },
- /* Paules CS3, write only */
- { 0xf1000000, 0x18000000, 0x00100000, MT_DEVICE },
+ { /* MQ200 */
+ .virtual = 0xf2800000,
+ .pfn = __phys_to_pfn(0x4b800000),
+ .length = 0x00800000,
+ .type = MT_DEVICE
+ }, { /* Paules CS3, write only */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x18000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ },
};
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 946c0d1..2d428b6 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -62,7 +62,12 @@
extern void shark_init_irq(void);
static struct map_desc shark_io_desc[] __initdata = {
- { IO_BASE , IO_START , IO_SIZE , MT_DEVICE }
+ {
+ .virtual = IO_BASE,
+ .pfn = __phys_to_pfn(IO_START),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init shark_map_io(void)
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index a30e045..7e4bdd0 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -186,25 +186,82 @@
}
static struct map_desc versatile_io_desc[] __initdata = {
- { IO_ADDRESS(VERSATILE_SYS_BASE), VERSATILE_SYS_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SIC_BASE), VERSATILE_SIC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_VIC_BASE), VERSATILE_VIC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SCTL_BASE), VERSATILE_SCTL_BASE, SZ_4K * 9, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_SYS_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_SIC_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SIC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_VIC_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_VIC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE),
+ .length = SZ_4K * 9,
+ .type = MT_DEVICE
+ },
#ifdef CONFIG_MACH_VERSATILE_AB
- { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_IB2_BASE), VERSATILE_IB2_BASE, SZ_64M, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_GPIO0_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_GPIO0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_IB2_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_IB2_BASE),
+ .length = SZ_64M,
+ .type = MT_DEVICE
+ },
#endif
#ifdef CONFIG_DEBUG_LL
- { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_UART0_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ },
#endif
#ifdef CONFIG_PCI
- { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE },
- { VERSATILE_PCI_VIRT_BASE, VERSATILE_PCI_BASE, VERSATILE_PCI_BASE_SIZE, MT_DEVICE },
- { VERSATILE_PCI_CFG_VIRT_BASE, VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_BASE,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_BASE),
+ .length = VERSATILE_PCI_BASE_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_CFG_VIRT_BASE,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
+ .length = VERSATILE_PCI_CFG_BASE_SIZE,
+ .type = MT_DEVICE
+ },
#if 0
- { VERSATILE_PCI_VIRT_MEM_BASE0, VERSATILE_PCI_MEM_BASE0, SZ_16M, MT_DEVICE },
- { VERSATILE_PCI_VIRT_MEM_BASE1, VERSATILE_PCI_MEM_BASE1, SZ_16M, MT_DEVICE },
- { VERSATILE_PCI_VIRT_MEM_BASE2, VERSATILE_PCI_MEM_BASE2, SZ_16M, MT_DEVICE },
+ {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ },
#endif
#endif
};
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index edffa47..f449681 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mm/init.c
*
- * Copyright (C) 1995-2002 Russell King
+ * Copyright (C) 1995-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -86,14 +86,19 @@
printk("%d pages swap cached\n", cached);
}
-struct node_info {
- unsigned int start;
- unsigned int end;
- int bootmap_pages;
-};
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+ return pmd_offset(pgd, virt);
+}
-#define O_PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-#define O_PFN_UP(x) (PAGE_ALIGN(x) >> PAGE_SHIFT)
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+ return pmd_off(pgd_offset_k(virt), virt);
+}
+
+#define for_each_nodebank(iter,mi,no) \
+ for (iter = 0; iter < mi->nr_banks; iter++) \
+ if (mi->bank[iter].node == no)
/*
* FIXME: We really want to avoid allocating the bootmap bitmap
@@ -106,15 +111,12 @@
{
unsigned int start_pfn, bank, bootmap_pfn;
- start_pfn = O_PFN_UP(__pa(&_end));
+ start_pfn = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT;
bootmap_pfn = 0;
- for (bank = 0; bank < mi->nr_banks; bank ++) {
+ for_each_nodebank(bank, mi, node) {
unsigned int start, end;
- if (mi->bank[bank].node != node)
- continue;
-
start = mi->bank[bank].start >> PAGE_SHIFT;
end = (mi->bank[bank].size +
mi->bank[bank].start) >> PAGE_SHIFT;
@@ -140,92 +142,6 @@
return bootmap_pfn;
}
-/*
- * Scan the memory info structure and pull out:
- * - the end of memory
- * - the number of nodes
- * - the pfn range of each node
- * - the number of bootmem bitmap pages
- */
-static unsigned int __init
-find_memend_and_nodes(struct meminfo *mi, struct node_info *np)
-{
- unsigned int i, bootmem_pages = 0, memend_pfn = 0;
-
- for (i = 0; i < MAX_NUMNODES; i++) {
- np[i].start = -1U;
- np[i].end = 0;
- np[i].bootmap_pages = 0;
- }
-
- for (i = 0; i < mi->nr_banks; i++) {
- unsigned long start, end;
- int node;
-
- if (mi->bank[i].size == 0) {
- /*
- * Mark this bank with an invalid node number
- */
- mi->bank[i].node = -1;
- continue;
- }
-
- node = mi->bank[i].node;
-
- /*
- * Make sure we haven't exceeded the maximum number of nodes
- * that we have in this configuration. If we have, we're in
- * trouble. (maybe we ought to limit, instead of bugging?)
- */
- if (node >= MAX_NUMNODES)
- BUG();
- node_set_online(node);
-
- /*
- * Get the start and end pfns for this bank
- */
- start = mi->bank[i].start >> PAGE_SHIFT;
- end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
-
- if (np[node].start > start)
- np[node].start = start;
-
- if (np[node].end < end)
- np[node].end = end;
-
- if (memend_pfn < end)
- memend_pfn = end;
- }
-
- /*
- * Calculate the number of pages we require to
- * store the bootmem bitmaps.
- */
- for_each_online_node(i) {
- if (np[i].end == 0)
- continue;
-
- np[i].bootmap_pages = bootmem_bootmap_pages(np[i].end -
- np[i].start);
- bootmem_pages += np[i].bootmap_pages;
- }
-
- high_memory = __va(memend_pfn << PAGE_SHIFT);
-
- /*
- * This doesn't seem to be used by the Linux memory
- * manager any more. If we can get rid of it, we
- * also get rid of some of the stuff above as well.
- *
- * Note: max_low_pfn and max_pfn reflect the number
- * of _pages_ in the system, not the maximum PFN.
- */
- max_low_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
- max_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
-
- return bootmem_pages;
-}
-
static int __init check_initrd(struct meminfo *mi)
{
int initrd_node = -2;
@@ -266,9 +182,8 @@
/*
* Reserve the various regions of node 0
*/
-static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int bootmap_pages)
+static __init void reserve_node_zero(pg_data_t *pgdat)
{
- pg_data_t *pgdat = NODE_DATA(0);
unsigned long res_size = 0;
/*
@@ -289,13 +204,6 @@
PTRS_PER_PGD * sizeof(pgd_t));
/*
- * And don't forget to reserve the allocator bitmap,
- * which will be freed later.
- */
- reserve_bootmem_node(pgdat, bootmap_pfn << PAGE_SHIFT,
- bootmap_pages << PAGE_SHIFT);
-
- /*
* Hmm... This should go elsewhere, but we really really need to
* stop things allocating the low memory; ideally we need a better
* implementation of GFP_DMA which does not assume that DMA-able
@@ -324,93 +232,256 @@
reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
}
-/*
- * Register all available RAM in this node with the bootmem allocator.
- */
-static inline void free_bootmem_node_bank(int node, struct meminfo *mi)
+void __init build_mem_type_table(void);
+void __init create_mapping(struct map_desc *md);
+
+static unsigned long __init
+bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
{
- pg_data_t *pgdat = NODE_DATA(node);
- int bank;
+ unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
+ unsigned long start_pfn, end_pfn, boot_pfn;
+ unsigned int boot_pages;
+ pg_data_t *pgdat;
+ int i;
- for (bank = 0; bank < mi->nr_banks; bank++)
- if (mi->bank[bank].node == node)
- free_bootmem_node(pgdat, mi->bank[bank].start,
- mi->bank[bank].size);
-}
-
-/*
- * Initialise the bootmem allocator for all nodes. This is called
- * early during the architecture specific initialisation.
- */
-static void __init bootmem_init(struct meminfo *mi)
-{
- struct node_info node_info[MAX_NUMNODES], *np = node_info;
- unsigned int bootmap_pages, bootmap_pfn, map_pg;
- int node, initrd_node;
-
- bootmap_pages = find_memend_and_nodes(mi, np);
- bootmap_pfn = find_bootmap_pfn(0, mi, bootmap_pages);
- initrd_node = check_initrd(mi);
-
- map_pg = bootmap_pfn;
+ start_pfn = -1UL;
+ end_pfn = 0;
/*
- * Initialise the bootmem nodes.
- *
- * What we really want to do is:
- *
- * unmap_all_regions_except_kernel();
- * for_each_node_in_reverse_order(node) {
- * map_node(node);
- * allocate_bootmem_map(node);
- * init_bootmem_node(node);
- * free_bootmem_node(node);
- * }
- *
- * but this is a 2.5-type change. For now, we just set
- * the nodes up in reverse order.
- *
- * (we could also do with rolling bootmem_init and paging_init
- * into one generic "memory_init" type function).
+ * Calculate the pfn range, and map the memory banks for this node.
*/
- np += num_online_nodes() - 1;
- for (node = num_online_nodes() - 1; node >= 0; node--, np--) {
- /*
- * If there are no pages in this node, ignore it.
- * Note that node 0 must always have some pages.
- */
- if (np->end == 0 || !node_online(node)) {
- if (node == 0)
- BUG();
- continue;
- }
+ for_each_nodebank(i, mi, node) {
+ unsigned long start, end;
+ struct map_desc map;
- /*
- * Initialise the bootmem allocator.
- */
- init_bootmem_node(NODE_DATA(node), map_pg, np->start, np->end);
- free_bootmem_node_bank(node, mi);
- map_pg += np->bootmap_pages;
+ start = mi->bank[i].start >> PAGE_SHIFT;
+ end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
- /*
- * If this is node 0, we need to reserve some areas ASAP -
- * we may use bootmem on node 0 to setup the other nodes.
- */
- if (node == 0)
- reserve_node_zero(bootmap_pfn, bootmap_pages);
+ if (start_pfn > start)
+ start_pfn = start;
+ if (end_pfn < end)
+ end_pfn = end;
+
+ map.pfn = __phys_to_pfn(mi->bank[i].start);
+ map.virtual = __phys_to_virt(mi->bank[i].start);
+ map.length = mi->bank[i].size;
+ map.type = MT_MEMORY;
+
+ create_mapping(&map);
}
+ /*
+ * If there is no memory in this node, ignore it.
+ */
+ if (end_pfn == 0)
+ return end_pfn;
+
+ /*
+ * Allocate the bootmem bitmap page.
+ */
+ boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+ boot_pfn = find_bootmap_pfn(node, mi, boot_pages);
+
+ /*
+ * Initialise the bootmem allocator for this node, handing the
+ * memory banks over to bootmem.
+ */
+ node_set_online(node);
+ pgdat = NODE_DATA(node);
+ init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
+
+ for_each_nodebank(i, mi, node)
+ free_bootmem_node(pgdat, mi->bank[i].start, mi->bank[i].size);
+
+ /*
+ * Reserve the bootmem bitmap for this node.
+ */
+ reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
+ boot_pages << PAGE_SHIFT);
#ifdef CONFIG_BLK_DEV_INITRD
- if (phys_initrd_size && initrd_node >= 0) {
- reserve_bootmem_node(NODE_DATA(initrd_node), phys_initrd_start,
+ /*
+ * If the initrd is in this node, reserve its memory.
+ */
+ if (node == initrd_node) {
+ reserve_bootmem_node(pgdat, phys_initrd_start,
phys_initrd_size);
initrd_start = __phys_to_virt(phys_initrd_start);
initrd_end = initrd_start + phys_initrd_size;
}
#endif
- BUG_ON(map_pg != bootmap_pfn + bootmap_pages);
+ /*
+ * Finally, reserve any node zero regions.
+ */
+ if (node == 0)
+ reserve_node_zero(pgdat);
+
+ /*
+ * initialise the zones within this node.
+ */
+ memset(zone_size, 0, sizeof(zone_size));
+ memset(zhole_size, 0, sizeof(zhole_size));
+
+ /*
+ * The size of this node has already been determined. If we need
+ * to do anything fancy with the allocation of this memory to the
+ * zones, now is the time to do it.
+ */
+ zone_size[0] = end_pfn - start_pfn;
+
+ /*
+ * For each bank in this node, calculate the size of the holes.
+ * holes = node_size - sum(bank_sizes_in_node)
+ */
+ zhole_size[0] = zone_size[0];
+ for_each_nodebank(i, mi, node)
+ zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
+
+ /*
+ * Adjust the sizes according to any special requirements for
+ * this machine type.
+ */
+ arch_adjust_zones(node, zone_size, zhole_size);
+
+ free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size);
+
+ return end_pfn;
+}
+
+static void __init bootmem_init(struct meminfo *mi)
+{
+ unsigned long addr, memend_pfn = 0;
+ int node, initrd_node, i;
+
+ /*
+ * Invalidate the node number for empty or invalid memory banks
+ */
+ for (i = 0; i < mi->nr_banks; i++)
+ if (mi->bank[i].size == 0 || mi->bank[i].node >= MAX_NUMNODES)
+ mi->bank[i].node = -1;
+
+ memcpy(&meminfo, mi, sizeof(meminfo));
+
+#ifdef CONFIG_XIP_KERNEL
+#error needs fixing
+ p->pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PMD_MASK);
+ p->virtual = (unsigned long)&_stext & PMD_MASK;
+ p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK;
+ p->type = MT_ROM;
+ p ++;
+#endif
+
+ /*
+ * Clear out all the mappings below the kernel image.
+ * FIXME: what about XIP?
+ */
+ for (addr = 0; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Clear out all the kernel space mappings, except for the first
+ * memory bank, up to the end of the vmalloc region.
+ */
+ for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
+ addr < VMALLOC_END; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Locate which node contains the ramdisk image, if any.
+ */
+ initrd_node = check_initrd(mi);
+
+ /*
+ * Run through each node initialising the bootmem allocator.
+ */
+ for_each_node(node) {
+ unsigned long end_pfn;
+
+ end_pfn = bootmem_init_node(node, initrd_node, mi);
+
+ /*
+ * Remember the highest memory PFN.
+ */
+ if (end_pfn > memend_pfn)
+ memend_pfn = end_pfn;
+ }
+
+ high_memory = __va(memend_pfn << PAGE_SHIFT);
+
+ /*
+ * This doesn't seem to be used by the Linux memory manager any
+ * more, but is used by ll_rw_block. If we can get rid of it, we
+ * also get rid of some of the stuff above as well.
+ *
+ * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
+ * the system, not the maximum PFN.
+ */
+ max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
+}
+
+/*
+ * Set up device the mappings. Since we clear out the page tables for all
+ * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * This means you have to be careful how you debug this function, or any
+ * called function. (Do it by code inspection!)
+ */
+static void __init devicemaps_init(struct machine_desc *mdesc)
+{
+ struct map_desc map;
+ unsigned long addr;
+ void *vectors;
+
+ for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Map the cache flushing regions.
+ */
+#ifdef FLUSH_BASE
+ map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
+ map.virtual = FLUSH_BASE;
+ map.length = PGDIR_SIZE;
+ map.type = MT_CACHECLEAN;
+ create_mapping(&map);
+#endif
+#ifdef FLUSH_BASE_MINICACHE
+ map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + PGDIR_SIZE);
+ map.virtual = FLUSH_BASE_MINICACHE;
+ map.length = PGDIR_SIZE;
+ map.type = MT_MINICLEAN;
+ create_mapping(&map);
+#endif
+
+ flush_cache_all();
+ local_flush_tlb_all();
+
+ vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+ BUG_ON(!vectors);
+
+ /*
+ * Create a mapping for the machine vectors at the high-vectors
+ * location (0xffff0000). If we aren't using high-vectors, also
+ * create a mapping at the low-vectors virtual address.
+ */
+ map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+ map.virtual = 0xffff0000;
+ map.length = PAGE_SIZE;
+ map.type = MT_HIGH_VECTORS;
+ create_mapping(&map);
+
+ if (!vectors_high()) {
+ map.virtual = 0;
+ map.type = MT_LOW_VECTORS;
+ create_mapping(&map);
+ }
+
+ /*
+ * Ask the machine support to map in the statically mapped devices.
+ * After this point, we can start to touch devices again.
+ */
+ if (mdesc->map_io)
+ mdesc->map_io();
}
/*
@@ -420,87 +491,17 @@
void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
{
void *zero_page;
- int node;
+ build_mem_type_table();
bootmem_init(mi);
+ devicemaps_init(mdesc);
- memcpy(&meminfo, mi, sizeof(meminfo));
+ top_pmd = pmd_off_k(0xffff0000);
/*
* allocate the zero page. Note that we count on this going ok.
*/
zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
-
- /*
- * initialise the page tables.
- */
- memtable_init(mi);
- if (mdesc->map_io)
- mdesc->map_io();
- local_flush_tlb_all();
-
- /*
- * initialise the zones within each node
- */
- for_each_online_node(node) {
- unsigned long zone_size[MAX_NR_ZONES];
- unsigned long zhole_size[MAX_NR_ZONES];
- struct bootmem_data *bdata;
- pg_data_t *pgdat;
- int i;
-
- /*
- * Initialise the zone size information.
- */
- for (i = 0; i < MAX_NR_ZONES; i++) {
- zone_size[i] = 0;
- zhole_size[i] = 0;
- }
-
- pgdat = NODE_DATA(node);
- bdata = pgdat->bdata;
-
- /*
- * The size of this node has already been determined.
- * If we need to do anything fancy with the allocation
- * of this memory to the zones, now is the time to do
- * it.
- */
- zone_size[0] = bdata->node_low_pfn -
- (bdata->node_boot_start >> PAGE_SHIFT);
-
- /*
- * If this zone has zero size, skip it.
- */
- if (!zone_size[0])
- continue;
-
- /*
- * For each bank in this node, calculate the size of the
- * holes. holes = node_size - sum(bank_sizes_in_node)
- */
- zhole_size[0] = zone_size[0];
- for (i = 0; i < mi->nr_banks; i++) {
- if (mi->bank[i].node != node)
- continue;
-
- zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
- }
-
- /*
- * Adjust the sizes according to any special
- * requirements for this machine type.
- */
- arch_adjust_zones(node, zone_size, zhole_size);
-
- free_area_init_node(node, pgdat, zone_size,
- bdata->node_boot_start >> PAGE_SHIFT, zhole_size);
- }
-
- /*
- * finish off the bad pages once
- * the mem_map is initialised
- */
memzero(zero_page, PAGE_SIZE);
empty_zero_page = virt_to_page(zero_page);
flush_dcache_page(empty_zero_page);
@@ -562,10 +563,7 @@
* may not be the case, especially if the user has provided the
* information on the command line.
*/
- for (i = 0; i < mi->nr_banks; i++) {
- if (mi->bank[i].size == 0 || mi->bank[i].node != node)
- continue;
-
+ for_each_nodebank(i, mi, node) {
bank_start = mi->bank[i].start >> PAGE_SHIFT;
if (bank_start < prev_bank_end) {
printk(KERN_ERR "MEM: unordered memory banks. "
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 7110e54..6fb1258 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -26,6 +26,7 @@
#include <linux/vmalloc.h>
#include <asm/cacheflush.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index d125a3d..61bc2fa 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mm/mm-armv.c
*
- * Copyright (C) 1998-2002 Russell King
+ * Copyright (C) 1998-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -305,16 +305,6 @@
set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
}
-/*
- * Clear any PGD mapping. On a two-level page table system,
- * the clearance is done by the middle-level functions (pmd)
- * rather than the top-level (pgd) functions.
- */
-static inline void clear_mapping(unsigned long virt)
-{
- pmd_clear(pmd_off_k(virt));
-}
-
struct mem_types {
unsigned int prot_pte;
unsigned int prot_l1;
@@ -373,7 +363,7 @@
/*
* Adjust the PMD section entries according to the CPU in use.
*/
-static void __init build_mem_type_table(void)
+void __init build_mem_type_table(void)
{
struct cachepolicy *cp;
unsigned int cr = get_cr();
@@ -483,25 +473,25 @@
* offsets, and we take full advantage of sections and
* supersections.
*/
-static void __init create_mapping(struct map_desc *md)
+void __init create_mapping(struct map_desc *md)
{
unsigned long virt, length;
int prot_sect, prot_l1, domain;
pgprot_t prot_pte;
- long off;
+ unsigned long off = (u32)__pfn_to_phys(md->pfn);
if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
printk(KERN_WARNING "BUG: not creating mapping for "
- "0x%08lx at 0x%08lx in user region\n",
- md->physical, md->virtual);
+ "0x%016llx at 0x%08lx in user region\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
- printk(KERN_WARNING "BUG: mapping for 0x%08lx at 0x%08lx "
+ printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx "
"overlaps vmalloc space\n",
- md->physical, md->virtual);
+ __pfn_to_phys((u64)md->pfn), md->virtual);
}
domain = mem_types[md->type].domain;
@@ -509,15 +499,40 @@
prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain);
prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain);
+ /*
+ * Catch 36-bit addresses
+ */
+ if(md->pfn >= 0x100000) {
+ if(domain) {
+ printk(KERN_ERR "MM: invalid domain in supersection "
+ "mapping for 0x%016llx at 0x%08lx\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ return;
+ }
+ if((md->virtual | md->length | __pfn_to_phys(md->pfn))
+ & ~SUPERSECTION_MASK) {
+ printk(KERN_ERR "MM: cannot create mapping for "
+ "0x%016llx at 0x%08lx invalid alignment\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ return;
+ }
+
+ /*
+ * Shift bits [35:32] of address into bits [23:20] of PMD
+ * (See ARMv6 spec).
+ */
+ off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
+ }
+
virt = md->virtual;
- off = md->physical - virt;
+ off -= virt;
length = md->length;
if (mem_types[md->type].prot_l1 == 0 &&
(virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) {
printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
"be mapped using pages, ignoring.\n",
- md->physical, md->virtual);
+ __pfn_to_phys(md->pfn), md->virtual);
return;
}
@@ -535,13 +550,22 @@
* of the actual domain assignments in use.
*/
if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) {
- /* Align to supersection boundary */
- while ((virt & ~SUPERSECTION_MASK || (virt + off) &
- ~SUPERSECTION_MASK) && length >= (PGDIR_SIZE / 2)) {
- alloc_init_section(virt, virt + off, prot_sect);
+ /*
+ * Align to supersection boundary if !high pages.
+ * High pages have already been checked for proper
+ * alignment above and they will fail the SUPSERSECTION_MASK
+ * check because of the way the address is encoded into
+ * offset.
+ */
+ if (md->pfn <= 0x100000) {
+ while ((virt & ~SUPERSECTION_MASK ||
+ (virt + off) & ~SUPERSECTION_MASK) &&
+ length >= (PGDIR_SIZE / 2)) {
+ alloc_init_section(virt, virt + off, prot_sect);
- virt += (PGDIR_SIZE / 2);
- length -= (PGDIR_SIZE / 2);
+ virt += (PGDIR_SIZE / 2);
+ length -= (PGDIR_SIZE / 2);
+ }
}
while (length >= SUPERSECTION_SIZE) {
@@ -601,100 +625,6 @@
}
}
-extern void _stext, _etext;
-
-/*
- * Setup initial mappings. We use the page we allocated for zero page to hold
- * the mappings, which will get overwritten by the vectors in traps_init().
- * The mappings must be in virtual address order.
- */
-void __init memtable_init(struct meminfo *mi)
-{
- struct map_desc *init_maps, *p, *q;
- unsigned long address = 0;
- int i;
-
- build_mem_type_table();
-
- init_maps = p = alloc_bootmem_low_pages(PAGE_SIZE);
-
-#ifdef CONFIG_XIP_KERNEL
- p->physical = CONFIG_XIP_PHYS_ADDR & PMD_MASK;
- p->virtual = (unsigned long)&_stext & PMD_MASK;
- p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK;
- p->type = MT_ROM;
- p ++;
-#endif
-
- for (i = 0; i < mi->nr_banks; i++) {
- if (mi->bank[i].size == 0)
- continue;
-
- p->physical = mi->bank[i].start;
- p->virtual = __phys_to_virt(p->physical);
- p->length = mi->bank[i].size;
- p->type = MT_MEMORY;
- p ++;
- }
-
-#ifdef FLUSH_BASE
- p->physical = FLUSH_BASE_PHYS;
- p->virtual = FLUSH_BASE;
- p->length = PGDIR_SIZE;
- p->type = MT_CACHECLEAN;
- p ++;
-#endif
-
-#ifdef FLUSH_BASE_MINICACHE
- p->physical = FLUSH_BASE_PHYS + PGDIR_SIZE;
- p->virtual = FLUSH_BASE_MINICACHE;
- p->length = PGDIR_SIZE;
- p->type = MT_MINICLEAN;
- p ++;
-#endif
-
- /*
- * Go through the initial mappings, but clear out any
- * pgdir entries that are not in the description.
- */
- q = init_maps;
- do {
- if (address < q->virtual || q == p) {
- clear_mapping(address);
- address += PGDIR_SIZE;
- } else {
- create_mapping(q);
-
- address = q->virtual + q->length;
- address = (address + PGDIR_SIZE - 1) & PGDIR_MASK;
-
- q ++;
- }
- } while (address != 0);
-
- /*
- * Create a mapping for the machine vectors at the high-vectors
- * location (0xffff0000). If we aren't using high-vectors, also
- * create a mapping at the low-vectors virtual address.
- */
- init_maps->physical = virt_to_phys(init_maps);
- init_maps->virtual = 0xffff0000;
- init_maps->length = PAGE_SIZE;
- init_maps->type = MT_HIGH_VECTORS;
- create_mapping(init_maps);
-
- if (!vectors_high()) {
- init_maps->virtual = 0;
- init_maps->type = MT_LOW_VECTORS;
- create_mapping(init_maps);
- }
-
- flush_cache_all();
- local_flush_tlb_all();
-
- top_pmd = pmd_off_k(0xffff0000);
-}
-
/*
* Create the architecture specific mappings
*/
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index 8ffb523..6a94e54 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -6,6 +6,6 @@
oprofilefs.o oprofile_stats.o \
timer_int.o )
-oprofile-y := $(DRIVER_OBJS) init.o backtrace.o
-oprofile-$(CONFIG_CPU_XSCALE) += common.o op_model_xscale.o
+oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
+oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index e57dde8..1415930 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -10,40 +10,94 @@
#include <linux/init.h>
#include <linux/oprofile.h>
#include <linux/errno.h>
-#include <asm/semaphore.h>
#include <linux/sysdev.h>
+#include <asm/semaphore.h>
#include "op_counter.h"
#include "op_arm_model.h"
-static struct op_arm_model_spec *pmu_model;
-static int pmu_enabled;
-static struct semaphore pmu_sem;
+static struct op_arm_model_spec *op_arm_model;
+static int op_arm_enabled;
+static struct semaphore op_arm_sem;
-static int pmu_start(void);
-static int pmu_setup(void);
-static void pmu_stop(void);
-static int pmu_create_files(struct super_block *, struct dentry *);
+struct op_counter_config counter_config[OP_MAX_COUNTER];
-#ifdef CONFIG_PM
-static int pmu_suspend(struct sys_device *dev, pm_message_t state)
+static int op_arm_create_files(struct super_block *sb, struct dentry *root)
{
- if (pmu_enabled)
- pmu_stop();
+ unsigned int i;
+
+ for (i = 0; i < op_arm_model->num_counters; i++) {
+ struct dentry *dir;
+ char buf[2];
+
+ snprintf(buf, sizeof buf, "%d", i);
+ dir = oprofilefs_mkdir(sb, root, buf);
+ oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled);
+ oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event);
+ oprofilefs_create_ulong(sb, dir, "count", &counter_config[i].count);
+ oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
+ oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
+ oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
+ }
+
return 0;
}
-static int pmu_resume(struct sys_device *dev)
+static int op_arm_setup(void)
{
- if (pmu_enabled)
- pmu_start();
+ int ret;
+
+ spin_lock(&oprofilefs_lock);
+ ret = op_arm_model->setup_ctrs();
+ spin_unlock(&oprofilefs_lock);
+ return ret;
+}
+
+static int op_arm_start(void)
+{
+ int ret = -EBUSY;
+
+ down(&op_arm_sem);
+ if (!op_arm_enabled) {
+ ret = op_arm_model->start();
+ op_arm_enabled = !ret;
+ }
+ up(&op_arm_sem);
+ return ret;
+}
+
+static void op_arm_stop(void)
+{
+ down(&op_arm_sem);
+ if (op_arm_enabled)
+ op_arm_model->stop();
+ op_arm_enabled = 0;
+ up(&op_arm_sem);
+}
+
+#ifdef CONFIG_PM
+static int op_arm_suspend(struct sys_device *dev, pm_message_t state)
+{
+ down(&op_arm_sem);
+ if (op_arm_enabled)
+ op_arm_model->stop();
+ up(&op_arm_sem);
+ return 0;
+}
+
+static int op_arm_resume(struct sys_device *dev)
+{
+ down(&op_arm_sem);
+ if (op_arm_enabled && op_arm_model->start())
+ op_arm_enabled = 0;
+ up(&op_arm_sem);
return 0;
}
static struct sysdev_class oprofile_sysclass = {
set_kset_name("oprofile"),
- .resume = pmu_resume,
- .suspend = pmu_suspend,
+ .resume = op_arm_resume,
+ .suspend = op_arm_suspend,
};
static struct sys_device device_oprofile = {
@@ -71,86 +125,41 @@
#define exit_driverfs() do { } while (0)
#endif /* CONFIG_PM */
-struct op_counter_config counter_config[OP_MAX_COUNTER];
-
-static int pmu_create_files(struct super_block *sb, struct dentry *root)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
{
- unsigned int i;
+ struct op_arm_model_spec *spec = NULL;
+ int ret = -ENODEV;
- for (i = 0; i < pmu_model->num_counters; i++) {
- struct dentry *dir;
- char buf[2];
+#ifdef CONFIG_CPU_XSCALE
+ spec = &op_xscale_spec;
+#endif
- snprintf(buf, sizeof buf, "%d", i);
- dir = oprofilefs_mkdir(sb, root, buf);
- oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled);
- oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event);
- oprofilefs_create_ulong(sb, dir, "count", &counter_config[i].count);
- oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
- oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
- oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
+ if (spec) {
+ init_MUTEX(&op_arm_sem);
+
+ if (spec->init() < 0)
+ return -ENODEV;
+
+ op_arm_model = spec;
+ init_driverfs();
+ ops->create_files = op_arm_create_files;
+ ops->setup = op_arm_setup;
+ ops->shutdown = op_arm_stop;
+ ops->start = op_arm_start;
+ ops->stop = op_arm_stop;
+ ops->cpu_type = op_arm_model->name;
+ ops->backtrace = arm_backtrace;
+ printk(KERN_INFO "oprofile: using %s\n", spec->name);
}
- return 0;
-}
-
-static int pmu_setup(void)
-{
- int ret;
-
- spin_lock(&oprofilefs_lock);
- ret = pmu_model->setup_ctrs();
- spin_unlock(&oprofilefs_lock);
return ret;
}
-static int pmu_start(void)
+void oprofile_arch_exit(void)
{
- int ret = -EBUSY;
-
- down(&pmu_sem);
- if (!pmu_enabled) {
- ret = pmu_model->start();
- pmu_enabled = !ret;
- }
- up(&pmu_sem);
- return ret;
-}
-
-static void pmu_stop(void)
-{
- down(&pmu_sem);
- if (pmu_enabled)
- pmu_model->stop();
- pmu_enabled = 0;
- up(&pmu_sem);
-}
-
-int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec)
-{
- init_MUTEX(&pmu_sem);
-
- if (spec->init() < 0)
- return -ENODEV;
-
- pmu_model = spec;
- init_driverfs();
- ops->create_files = pmu_create_files;
- ops->setup = pmu_setup;
- ops->shutdown = pmu_stop;
- ops->start = pmu_start;
- ops->stop = pmu_stop;
- ops->cpu_type = pmu_model->name;
- printk(KERN_INFO "oprofile: using %s PMU\n", spec->name);
-
- return 0;
-}
-
-void pmu_exit(void)
-{
- if (pmu_model) {
+ if (op_arm_model) {
exit_driverfs();
- pmu_model = NULL;
+ op_arm_model = NULL;
}
}
diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c
deleted file mode 100644
index d315a3a..0000000
--- a/arch/arm/oprofile/init.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/**
- * @file init.c
- *
- * @remark Copyright 2004 Oprofile Authors
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include "op_arm_model.h"
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- int ret = -ENODEV;
-
-#ifdef CONFIG_CPU_XSCALE
- ret = pmu_init(ops, &op_xscale_spec);
-#endif
-
- ops->backtrace = arm_backtrace;
-
- return ret;
-}
-
-void oprofile_arch_exit(void)
-{
-#ifdef CONFIG_CPU_XSCALE
- pmu_exit();
-#endif
-}
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 2148d07..38c6ad1 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -26,6 +26,6 @@
extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
-extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
-extern void pmu_exit(void);
+extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
+extern void op_arm_exit(void);
#endif /* OP_ARM_MODEL_H */
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 7719a40..7ad69f1 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -59,7 +59,11 @@
}
static struct map_desc omap_sram_io_desc[] __initdata = {
- { OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE }
+ { /* .length gets filled in at runtime */
+ .virtual = OMAP1_SRAM_BASE,
+ .pfn = __phys_to_pfn(OMAP1_SRAM_START),
+ .type = MT_DEVICE
+ }
};
/*
diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c
index 4647db4..13bae79 100644
--- a/arch/i386/kernel/cpuid.c
+++ b/arch/i386/kernel/cpuid.c
@@ -163,7 +163,7 @@
int err = 0;
struct class_device *class_err;
- class_err = class_device_create(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
+ class_err = class_device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
if (IS_ERR(class_err))
err = PTR_ERR(class_err);
return err;
diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c
index 03100d6..44470fe 100644
--- a/arch/i386/kernel/msr.c
+++ b/arch/i386/kernel/msr.c
@@ -246,7 +246,7 @@
int err = 0;
struct class_device *class_err;
- class_err = class_device_create(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
+ class_err = class_device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
if (IS_ERR(class_err))
err = PTR_ERR(class_err);
return err;
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 0b07922..874a283 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -47,10 +47,10 @@
config ISA_DMA_API
bool
- default y
config ARCH_MAY_HAVE_PC_FDC
bool
+ depends on BROKEN
default y
source "init/Kconfig"
@@ -154,13 +154,14 @@
config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous memory support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on 64BIT && EXPERIMENTAL
help
Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
+source "kernel/Kconfig.hz"
source "mm/Kconfig"
config PREEMPT
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 3b339b1..9b7e424 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -20,7 +20,8 @@
CHECKFLAGS += -D__hppa__=1
ifdef CONFIG_64BIT
-CROSS_COMPILE := hppa64-linux-
+CROSS_COMPILE := $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \
+ echo hppa64-linux-gnu-; else echo hppa64-linux-; fi)
UTS_MACHINE := parisc64
CHECKFLAGS += -D__LP64__=1 -m64
else
@@ -34,6 +35,14 @@
OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
+GCC_VERSION := $(call cc-version)
+ifneq ($(shell if [ -z $(GCC_VERSION) ] ; then echo "bad"; fi ;),)
+$(error Sorry, couldn't find ($(cc-version)).)
+endif
+ifneq ($(shell if [ $(GCC_VERSION) -lt 0303 ] ; then echo "bad"; fi ;),)
+$(error Sorry, your compiler is too old ($(GCC_VERSION)). GCC v3.3 or above is required.)
+endif
+
cflags-y := -pipe
# These flags should be implied by an hppa-linux configuration, but they
@@ -43,7 +52,7 @@
# Currently we save and restore fpregs on all kernel entry/interruption paths.
# If that gets optimized, we might need to disable the use of fpregs in the
# kernel.
-#cflags-y += -mdisable-fpregs
+cflags-y += -mdisable-fpregs
# Without this, "ld -r" results in .text sections that are too big
# (> 0x40000) for branches to reach stubs.
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 6efaa92..3e013f5 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -1,12 +1,16 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan 5 13:20:32 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:34 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -15,35 +19,40 @@
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -65,9 +74,18 @@
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
-# CONFIG_64BIT is not set
# CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -81,8 +99,6 @@
# CONFIG_GSC_WAX is not set
# CONFIG_EISA is not set
# CONFIG_PCI is not set
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -90,12 +106,15 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
+# PCI Hotplug Support
#
#
-# PCI Hotplug Support
+# PA-RISC specific drivers
#
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
#
# Executable file formats
@@ -104,137 +123,7 @@
CONFIG_BINFMT_MISC=m
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
-CONFIG_53C700_LE_ON_BE=y
-# CONFIG_SCSI_ZALON is not set
-CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -243,12 +132,14 @@
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -262,8 +153,10 @@
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
@@ -272,6 +165,7 @@
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
#
# IP: Netfilter Configuration
@@ -279,11 +173,14 @@
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
@@ -307,21 +204,23 @@
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
-# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
@@ -333,6 +232,7 @@
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
@@ -340,10 +240,11 @@
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -362,10 +263,6 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@@ -373,17 +270,162 @@
# Network testing
#
CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+CONFIG_SCSI_LASI700=y
+CONFIG_53C700_LE_ON_BE=y
+# CONFIG_SCSI_ZALON is not set
+CONFIG_SCSI_DEBUG=m
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
@@ -391,6 +433,7 @@
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
+# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
@@ -414,6 +457,7 @@
#
# CONFIG_STRIP is not set
# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Wan interfaces
@@ -431,6 +475,8 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -460,19 +506,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -483,6 +516,7 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
# CONFIG_KEYBOARD_HIL is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
@@ -494,6 +528,19 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -511,7 +558,6 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -546,12 +592,14 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -562,10 +610,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -579,28 +637,36 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_STI=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
#
# Logo configuration
@@ -610,6 +676,7 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -657,10 +724,6 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -671,10 +734,20 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
@@ -682,20 +755,24 @@
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -722,14 +799,11 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TMPFS_SECURITY is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -754,16 +828,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
@@ -778,6 +855,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -838,13 +916,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
@@ -865,6 +949,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -882,9 +967,14 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index 30fc03e..955ef50 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc4-pa1
-# Wed Feb 16 11:32:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:54 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -10,6 +10,7 @@
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -19,26 +20,32 @@
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -74,7 +82,19 @@
CONFIG_64BIT=y
CONFIG_SMP=y
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
CONFIG_COMPAT=y
CONFIG_NR_CPUS=8
@@ -85,7 +105,7 @@
# CONFIG_GSC is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
@@ -96,6 +116,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -104,7 +126,6 @@
CONFIG_YENTA=m
CONFIG_PD6729=m
CONFIG_I82092=m
-CONFIG_TCIC=m
CONFIG_PCCARD_NONSTATIC=m
#
@@ -127,6 +148,203 @@
# CONFIG_BINFMT_MISC is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+# CONFIG_IP6_NF_MATCH_LENGTH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
@@ -139,6 +357,11 @@
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -169,7 +392,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -189,6 +411,7 @@
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -201,6 +424,7 @@
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -215,6 +439,7 @@
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -229,14 +454,12 @@
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
@@ -246,8 +469,6 @@
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
@@ -258,7 +479,9 @@
# CONFIG_SCSI_QLA22XX is not set
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
@@ -288,8 +511,11 @@
#
# Fusion MPT device support
#
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
#
@@ -303,153 +529,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -457,12 +543,18 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
@@ -479,6 +571,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_HP100=m
@@ -489,48 +582,43 @@
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
+# CONFIG_EEPRO100 is not set
CONFIG_E100=m
-CONFIG_E100_NAPI=y
# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
-CONFIG_EPIC100=m
+# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_DL2K=m
+# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
-CONFIG_IXGB=m
-CONFIG_IXGB_NAPI=y
-CONFIG_S2IO=m
-CONFIG_S2IO_NAPI=y
-# CONFIG_2BUFF_MODE is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
#
# Token Ring devices
@@ -560,6 +648,7 @@
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
+# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ATMEL is not set
@@ -567,6 +656,7 @@
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
@@ -574,6 +664,7 @@
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
@@ -607,6 +698,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -633,13 +726,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -649,6 +735,12 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -667,7 +759,6 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -677,6 +768,7 @@
CONFIG_PDC_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
@@ -708,6 +800,11 @@
CONFIG_MAX_RAW_DEVS=256
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -718,10 +815,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -742,6 +849,7 @@
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
+# CONFIG_STI_CONSOLE is not set
#
# Sound
@@ -751,13 +859,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -772,17 +876,18 @@
#
# InfiniBand support
#
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
@@ -794,22 +899,20 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -836,13 +939,11 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -867,15 +968,18 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -890,6 +994,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -906,15 +1011,15 @@
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
+# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
-CONFIG_NLS_CODEPAGE_863=m
+# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
-CONFIG_NLS_CODEPAGE_865=m
+# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
@@ -926,10 +1031,10 @@
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
@@ -950,11 +1055,15 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_IOREMAP is not set
@@ -974,25 +1083,26 @@
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
@@ -1004,6 +1114,7 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 46c9511..8819e7e 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -1,12 +1,15 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan 5 13:35:54 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:10 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
@@ -14,33 +17,39 @@
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -60,8 +69,14 @@
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
-# CONFIG_64BIT is not set
# CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -78,11 +93,25 @@
CONFIG_ISA=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_GSC_DINO=y
# CONFIG_PCI_LBA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# PA-RISC specific drivers
+#
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
#
# Executable file formats
@@ -91,6 +120,64 @@
# CONFIG_BINFMT_MISC is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
@@ -99,9 +186,15 @@
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -111,10 +204,8 @@
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
@@ -125,19 +216,17 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -149,6 +238,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=y
#
# ATA/ATAPI/MFM/RLL support
@@ -158,6 +248,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -170,6 +261,7 @@
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -183,16 +275,16 @@
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -202,14 +294,11 @@
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
@@ -219,7 +308,6 @@
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -231,7 +319,6 @@
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -240,12 +327,12 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
@@ -263,6 +350,7 @@
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
+CONFIG_MD_RAID6=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
@@ -271,6 +359,9 @@
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -283,58 +374,8 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -347,6 +388,11 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -354,8 +400,8 @@
# CONFIG_LASI_82596 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
@@ -369,6 +415,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
@@ -384,12 +431,15 @@
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -413,12 +463,12 @@
#
# Wireless 802.11b ISA/PCI cards support
#
-# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
+# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
@@ -435,6 +485,8 @@
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -464,23 +516,12 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-# CONFIG_HP_SDC is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
+# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
@@ -488,7 +529,7 @@
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
@@ -502,6 +543,19 @@
# CONFIG_HP_SDC_RTC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+# CONFIG_HP_SDC is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -519,8 +573,11 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
#
# Non-8250 serial port support
@@ -529,6 +586,7 @@
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -555,11 +613,14 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -570,10 +631,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -587,6 +658,11 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -595,6 +671,7 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -606,18 +683,19 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -630,6 +708,7 @@
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -639,13 +718,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -658,23 +733,36 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -697,11 +785,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -719,15 +806,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -785,13 +876,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
@@ -815,6 +912,7 @@
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
@@ -832,8 +930,13 @@
# CONFIG_CRYPTO_TEST is not set
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 67aca6c..9d86b6b 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -1,12 +1,16 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan 5 13:26:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:31 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -15,26 +19,31 @@
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -44,6 +53,7 @@
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -66,10 +76,19 @@
CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_PREFETCH=y
-# CONFIG_PARISC64 is not set
# CONFIG_64BIT is not set
# CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -79,13 +98,10 @@
# CONFIG_GSC is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
-CONFIG_SUPERIO=y
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -93,21 +109,205 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
+# PA-RISC specific drivers
+#
+CONFIG_SUPERIO=y
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
+
+#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_DEBUG=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+CONFIG_IP6_NF_MATCH_OWNER=m
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+CONFIG_IP6_NF_MATCH_LENGTH=m
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_RAW is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
@@ -120,6 +320,11 @@
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -141,14 +346,14 @@
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -158,6 +363,7 @@
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -201,6 +407,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -218,6 +425,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -230,6 +438,7 @@
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -242,7 +451,9 @@
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -258,25 +469,26 @@
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=m
+# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
CONFIG_SCSI_SATA_PROMISE=m
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=m
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
@@ -286,20 +498,17 @@
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
-CONFIG_SCSI_QLOGIC_FC=m
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
-CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA6322=m
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
@@ -316,19 +525,24 @@
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
-CONFIG_MD_MULTIPATH=y
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
#
# Fusion MPT device support
#
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
#
@@ -342,151 +556,13 @@
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_DEBUG=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
@@ -494,12 +570,18 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
-CONFIG_HAPPYMEAL=m
+# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -514,28 +596,22 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
+# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
-CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
-CONFIG_B44=m
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
-# CONFIG_EEPRO100_PIO is not set
+# CONFIG_EEPRO100 is not set
CONFIG_E100=m
-# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -554,15 +630,18 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
-CONFIG_IXGB=y
-CONFIG_IXGB_NAPI=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
@@ -593,6 +672,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -622,16 +703,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -649,6 +720,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -666,7 +747,6 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -676,6 +756,7 @@
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -698,12 +779,16 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -714,10 +799,20 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -731,6 +826,11 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -739,6 +839,7 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -751,18 +852,20 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -775,6 +878,7 @@
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -784,7 +888,78 @@
#
# Advanced Linux Sound Architecture
#
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
@@ -794,6 +969,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
@@ -804,23 +981,23 @@
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
@@ -829,12 +1006,11 @@
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
+CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
@@ -846,21 +1022,25 @@
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-CONFIG_USB_KBTAB=m
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-CONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
@@ -879,6 +1059,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -894,7 +1075,6 @@
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
@@ -903,10 +1083,12 @@
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -920,27 +1102,41 @@
# CONFIG_MMC is not set
#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -966,13 +1162,11 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -996,16 +1190,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1014,6 +1211,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1074,13 +1272,19 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
@@ -1092,21 +1296,22 @@
# Cryptographic options
#
CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
+# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
@@ -1117,9 +1322,14 @@
CONFIG_CRYPTO_TEST=m
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index fdae21c5..f38a462 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -1,38 +1,56 @@
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:01:33 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -45,10 +63,21 @@
CONFIG_PA7000=y
# CONFIG_PA7100LC is not set
# CONFIG_PA7200 is not set
+# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
-# CONFIG_64BIT is not set
# CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -65,14 +94,29 @@
# CONFIG_ISA is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PA-RISC specific drivers
+#
CONFIG_SUPERIO=y
CONFIG_CHASSIS_LCD_LED=y
CONFIG_PDC_CHASSIS=y
+CONFIG_PDC_STABLE=y
#
# Executable file formats
@@ -81,15 +125,97 @@
# CONFIG_BINFMT_MISC is not set
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
#
# Generic Driver Options
#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -99,12 +225,10 @@
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
@@ -114,18 +238,31 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -135,6 +272,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -147,53 +285,59 @@
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -202,7 +346,8 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -217,15 +362,20 @@
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -238,80 +388,23 @@
# CONFIG_I2O is not set
#
-# Macintosh device drivers
+# Network device support
#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
@@ -321,6 +414,7 @@
CONFIG_LASI_82596=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
@@ -336,6 +430,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
@@ -361,30 +456,37 @@
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
-# CONFIG_ACENIC is not set
-CONFIG_DL2K=y
+CONFIG_ACENIC=y
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
@@ -399,38 +501,30 @@
#
# Wireless 802.11b ISA/PCI cards support
#
-CONFIG_AIRO=y
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
#
-# Token Ring devices
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -460,10 +554,56 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
+# Input Device Drivers
#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
+CONFIG_KEYBOARD_HIL=y
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_HIL is not set
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_HP_SDC_RTC=y
+
+#
+# Hardware I/O ports
+#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
@@ -471,38 +611,8 @@
CONFIG_HP_SDC=y
CONFIG_HIL_MLC=y
# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_HIL=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_HIL is not set
-CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDDLER is not set
-# CONFIG_JOYSTICK_DB9 is not set
-# CONFIG_JOYSTICK_GAMECON is not set
-# CONFIG_JOYSTICK_TURBOGRAFX is not set
-# CONFIG_INPUT_JOYDUMP is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_UINPUT is not set
-CONFIG_HP_SDC_RTC=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -522,16 +632,16 @@
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_MUX is not set
-# CONFIG_PDC_CONSOLE is not set
+CONFIG_SERIAL_MUX=y
+CONFIG_SERIAL_MUX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -541,12 +651,6 @@
# CONFIG_TIPAR is not set
#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
@@ -555,7 +659,6 @@
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
@@ -565,21 +668,40 @@
#
# Ftape, the floppy tape device driver
#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -593,34 +715,45 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
+CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -629,6 +762,7 @@
# Logo configuration
#
# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -638,17 +772,94 @@
#
# Advanced Linux Sound Architecture
#
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# GSC devices
+#
+CONFIG_SND_HARMONY=y
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
-# CONFIG_SOUND_HARMONY is not set
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
@@ -658,26 +869,36 @@
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
# CONFIG_USB_STORAGE is not set
#
-# USB Human Interface Devices (HID)
+# USB Input Devices
#
# CONFIG_USB_HID is not set
@@ -688,16 +909,23 @@
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
@@ -709,13 +937,15 @@
#
#
-# USB Network adaptors
+# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -732,12 +962,21 @@
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
#
# USB Gadget Support
@@ -745,22 +984,41 @@
# CONFIG_USB_GADGET is not set
#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -773,7 +1031,8 @@
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
@@ -781,11 +1040,11 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -809,23 +1068,28 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -861,6 +1125,7 @@
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
@@ -885,17 +1150,24 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_RWLOCK is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
#
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
@@ -909,6 +1181,8 @@
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
@@ -916,11 +1190,23 @@
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
+# Hardware crypto devices
+#
+
+#
# Library routines
#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index f46a07a..e15f09e 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -27,6 +27,7 @@
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/processor.h>
+#include <asm/sections.h>
int split_tlb;
int dcache_stride;
@@ -207,6 +208,9 @@
/* "New and Improved" version from Jim Hull
* (1 << (cc_block-1)) * (cc_line << (4 + cnf.cc_shift))
+ * The following CAFL_STRIDE is an optimized version, see
+ * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023625.html
+ * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023671.html
*/
#define CAFL_STRIDE(cnf) (cnf.cc_line << (3 + cnf.cc_block + cnf.cc_shift))
dcache_stride = CAFL_STRIDE(cache_info.dc_conf);
@@ -339,17 +343,15 @@
void parisc_setup_cache_timing(void)
{
unsigned long rangetime, alltime;
- extern char _text; /* start of kernel code, defined by linker */
- extern char _end; /* end of BSS, defined by linker */
unsigned long size;
alltime = mfctl(16);
flush_data_cache();
alltime = mfctl(16) - alltime;
- size = (unsigned long)(&_end - _text);
+ size = (unsigned long)(_end - _text);
rangetime = mfctl(16);
- flush_kernel_dcache_range((unsigned long)&_text, size);
+ flush_kernel_dcache_range((unsigned long)_text, size);
rangetime = mfctl(16) - rangetime;
printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n",
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index d34bbe7..988844a 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -46,36 +46,51 @@
.bus_id = "parisc",
};
-#define for_each_padev(padev) \
- for (padev = next_dev(&root); padev != NULL; \
- padev = next_dev(&padev->dev))
+static inline int check_dev(struct device *dev)
+{
+ if (dev->bus == &parisc_bus_type) {
+ struct parisc_device *pdev;
+ pdev = to_parisc_device(dev);
+ return pdev->id.hw_type != HPHW_FAULTY;
+ }
+ return 1;
+}
-#define check_dev(padev) \
- (padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev)
+static struct device *
+parse_tree_node(struct device *parent, int index, struct hardware_path *modpath);
+
+struct recurse_struct {
+ void * obj;
+ int (*fn)(struct device *, void *);
+};
+
+static int descend_children(struct device * dev, void * data)
+{
+ struct recurse_struct * recurse_data = (struct recurse_struct *)data;
+
+ if (recurse_data->fn(dev, recurse_data->obj))
+ return 1;
+ else
+ return device_for_each_child(dev, recurse_data, descend_children);
+}
/**
- * next_dev - enumerates registered devices
- * @dev: the previous device returned from next_dev
+ * for_each_padev - Iterate over all devices in the tree
+ * @fn: Function to call for each device.
+ * @data: Data to pass to the called function.
*
- * next_dev does a depth-first search of the tree, returning parents
- * before children. Returns NULL when there are no more devices.
+ * This performs a depth-first traversal of the tree, calling the
+ * function passed for each node. It calls the function for parents
+ * before children.
*/
-static struct parisc_device *next_dev(struct device *dev)
+
+static int for_each_padev(int (*fn)(struct device *, void *), void * data)
{
- if (!list_empty(&dev->children)) {
- dev = list_to_dev(dev->children.next);
- return check_dev(to_parisc_device(dev));
- }
-
- while (dev != &root) {
- if (dev->node.next != &dev->parent->children) {
- dev = list_to_dev(dev->node.next);
- return to_parisc_device(dev);
- }
- dev = dev->parent;
- }
-
- return NULL;
+ struct recurse_struct recurse_data = {
+ .obj = data,
+ .fn = fn,
+ };
+ return device_for_each_child(&root, &recurse_data, descend_children);
}
/**
@@ -105,12 +120,6 @@
return 0;
}
-static void claim_device(struct parisc_driver *driver, struct parisc_device *dev)
-{
- dev->driver = driver;
- request_mem_region(dev->hpa, 0x1000, driver->name);
-}
-
static int parisc_driver_probe(struct device *dev)
{
int rc;
@@ -119,8 +128,8 @@
rc = pa_drv->probe(pa_dev);
- if(!rc)
- claim_device(pa_drv, pa_dev);
+ if (!rc)
+ pa_dev->driver = pa_drv;
return rc;
}
@@ -131,7 +140,6 @@
struct parisc_driver *pa_drv = to_parisc_driver(dev->driver);
if (pa_drv->remove)
pa_drv->remove(pa_dev);
- release_mem_region(pa_dev->hpa, 0x1000);
return 0;
}
@@ -173,6 +181,24 @@
}
EXPORT_SYMBOL(register_parisc_driver);
+
+struct match_count {
+ struct parisc_driver * driver;
+ int count;
+};
+
+static int match_and_count(struct device * dev, void * data)
+{
+ struct match_count * m = data;
+ struct parisc_device * pdev = to_parisc_device(dev);
+
+ if (check_dev(dev)) {
+ if (match_device(m->driver, pdev))
+ m->count++;
+ }
+ return 0;
+}
+
/**
* count_parisc_driver - count # of devices this driver would match
* @driver: the PA-RISC driver to try
@@ -182,15 +208,14 @@
*/
int count_parisc_driver(struct parisc_driver *driver)
{
- struct parisc_device *device;
- int cnt = 0;
+ struct match_count m = {
+ .driver = driver,
+ .count = 0,
+ };
- for_each_padev(device) {
- if (match_device(driver, device))
- cnt++;
- }
+ for_each_padev(match_and_count, &m);
- return cnt;
+ return m.count;
}
@@ -206,14 +231,34 @@
}
EXPORT_SYMBOL(unregister_parisc_driver);
+struct find_data {
+ unsigned long hpa;
+ struct parisc_device * dev;
+};
+
+static int find_device(struct device * dev, void * data)
+{
+ struct parisc_device * pdev = to_parisc_device(dev);
+ struct find_data * d = (struct find_data*)data;
+
+ if (check_dev(dev)) {
+ if (pdev->hpa.start == d->hpa) {
+ d->dev = pdev;
+ return 1;
+ }
+ }
+ return 0;
+}
+
static struct parisc_device *find_device_by_addr(unsigned long hpa)
{
- struct parisc_device *dev;
- for_each_padev(dev) {
- if (dev->hpa == hpa)
- return dev;
- }
- return NULL;
+ struct find_data d = {
+ .hpa = hpa,
+ };
+ int ret;
+
+ ret = for_each_padev(find_device, &d);
+ return ret ? d.dev : NULL;
}
/**
@@ -387,6 +432,23 @@
return dev;
}
+struct match_id_data {
+ char id;
+ struct parisc_device * dev;
+};
+
+static int match_by_id(struct device * dev, void * data)
+{
+ struct parisc_device * pdev = to_parisc_device(dev);
+ struct match_id_data * d = data;
+
+ if (pdev->hw_path == d->id) {
+ d->dev = pdev;
+ return 1;
+ }
+ return 0;
+}
+
/**
* alloc_tree_node - returns a device entry in the iotree
* @parent: the parent node in the tree
@@ -397,15 +459,13 @@
*/
static struct parisc_device * alloc_tree_node(struct device *parent, char id)
{
- struct device *dev;
-
- list_for_each_entry(dev, &parent->children, node) {
- struct parisc_device *padev = to_parisc_device(dev);
- if (padev->hw_path == id)
- return padev;
- }
-
- return create_tree_node(id, parent);
+ struct match_id_data d = {
+ .id = id,
+ };
+ if (device_for_each_child(parent, &d, match_by_id))
+ return d.dev;
+ else
+ return create_tree_node(id, parent);
}
static struct parisc_device *create_parisc_device(struct hardware_path *modpath)
@@ -439,10 +499,8 @@
dev = create_parisc_device(mod_path);
if (dev->id.hw_type != HPHW_FAULTY) {
- char p[64];
- print_pa_hwpath(dev, p);
printk("Two devices have hardware path %s. Please file a bug with HP.\n"
- "In the meantime, you could try rearranging your cards.\n", p);
+ "In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev));
return NULL;
}
@@ -451,12 +509,27 @@
dev->id.hversion_rev = iodc_data[1] & 0x0f;
dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) |
(iodc_data[5] << 8) | iodc_data[6];
- dev->hpa = hpa;
+ dev->hpa.name = parisc_pathname(dev);
+ dev->hpa.start = hpa;
+ if (hpa == 0xf4000000 || hpa == 0xf6000000 ||
+ hpa == 0xf8000000 || hpa == 0xfa000000) {
+ dev->hpa.end = hpa + 0x01ffffff;
+ } else {
+ dev->hpa.end = hpa + 0xfff;
+ }
+ dev->hpa.flags = IORESOURCE_MEM;
name = parisc_hardware_description(&dev->id);
if (name) {
strlcpy(dev->name, name, sizeof(dev->name));
}
+ /* Silently fail things like mouse ports which are subsumed within
+ * the keyboard controller
+ */
+ if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa))
+ printk("Unable to claim HPA %lx for device %s\n",
+ hpa, name);
+
return dev;
}
@@ -555,6 +628,33 @@
return (curr->hw_path == id);
}
+struct parse_tree_data {
+ int index;
+ struct hardware_path * modpath;
+ struct device * dev;
+};
+
+static int check_parent(struct device * dev, void * data)
+{
+ struct parse_tree_data * d = data;
+
+ if (check_dev(dev)) {
+ if (dev->bus == &parisc_bus_type) {
+ if (match_parisc_device(dev, d->index, d->modpath))
+ d->dev = dev;
+ } else if (is_pci_dev(dev)) {
+ if (match_pci_device(dev, d->index, d->modpath))
+ d->dev = dev;
+ } else if (dev->bus == NULL) {
+ /* we are on a bus bridge */
+ struct device *new = parse_tree_node(dev, d->index, d->modpath);
+ if (new)
+ d->dev = new;
+ }
+ }
+ return d->dev != NULL;
+}
+
/**
* parse_tree_node - returns a device entry in the iotree
* @parent: the parent node in the tree
@@ -568,24 +668,18 @@
static struct device *
parse_tree_node(struct device *parent, int index, struct hardware_path *modpath)
{
- struct device *device;
-
- list_for_each_entry(device, &parent->children, node) {
- if (device->bus == &parisc_bus_type) {
- if (match_parisc_device(device, index, modpath))
- return device;
- } else if (is_pci_dev(device)) {
- if (match_pci_device(device, index, modpath))
- return device;
- } else if (device->bus == NULL) {
- /* we are on a bus bridge */
- struct device *new = parse_tree_node(device, index, modpath);
- if (new)
- return new;
- }
- }
+ struct parse_tree_data d = {
+ .index = index,
+ .modpath = modpath,
+ };
- return NULL;
+ struct recurse_struct recurse_data = {
+ .obj = &d,
+ .fn = check_parent,
+ };
+
+ device_for_each_child(parent, &recurse_data, descend_children);
+ return d.dev;
}
/**
@@ -636,7 +730,7 @@
((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT))
#define IS_LOWER_PORT(dev) \
- ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \
+ ((gsc_readl(dev->hpa.start + offsetof(struct bc_module, io_status)) \
& BC_PORT_MASK) == BC_LOWER_PORT)
#define MAX_NATIVE_DEVICES 64
@@ -645,8 +739,8 @@
#define FLEX_MASK F_EXTEND(0xfffc0000)
#define IO_IO_LOW offsetof(struct bc_module, io_io_low)
#define IO_IO_HIGH offsetof(struct bc_module, io_io_high)
-#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW)
-#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH)
+#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_LOW)
+#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_HIGH)
static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high,
struct device *parent);
@@ -655,10 +749,10 @@
{
unsigned long io_io_low, io_io_high;
- if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
+ if (!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
return;
- if(dev->id.hw_type == HPHW_IOA) {
+ if (dev->id.hw_type == HPHW_IOA) {
io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16);
io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET;
} else {
@@ -731,7 +825,7 @@
print_pa_hwpath(dev, hw_path);
printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
- ++count, dev->name, dev->hpa, hw_path, dev->id.hw_type,
+ ++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type,
dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
if (dev->num_addrs) {
@@ -753,13 +847,20 @@
get_device(&root);
}
+
+static int print_one_device(struct device * dev, void * data)
+{
+ struct parisc_device * pdev = to_parisc_device(dev);
+
+ if (check_dev(dev))
+ print_parisc_device(pdev);
+ return 0;
+}
+
/**
* print_parisc_devices - Print out a list of devices found in this system
*/
void print_parisc_devices(void)
{
- struct parisc_device *dev;
- for_each_padev(dev) {
- print_parisc_device(dev);
- }
+ for_each_padev(print_one_device, NULL);
}
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index be0f07f..c7e66ee 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -30,14 +30,14 @@
* - save registers to kernel stack and handle in assembly or C */
+#include <asm/psw.h>
#include <asm/assembly.h> /* for LDREG/STREG defines */
#include <asm/pgtable.h>
-#include <asm/psw.h>
#include <asm/signal.h>
#include <asm/unistd.h>
#include <asm/thread_info.h>
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#define CMPIB cmpib,*
#define CMPB cmpb,*
#define COND(x) *x
@@ -67,19 +67,22 @@
/* Switch to virtual mapping, trashing only %r1 */
.macro virt_map
- rsm PSW_SM_Q,%r0
- tovirt_r1 %r29
- mfsp %sr7, %r1
- or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */
- mtsp %r1, %sr3
+ /* pcxt_ssm_bug */
+ rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */
mtsp %r0, %sr4
mtsp %r0, %sr5
+ mfsp %sr7, %r1
+ or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */
+ mtsp %r1, %sr3
+ tovirt_r1 %r29
+ load32 KERNEL_PSW, %r1
+
+ rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */
mtsp %r0, %sr6
mtsp %r0, %sr7
- load32 KERNEL_PSW, %r1
- mtctl %r1, %cr22
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
+ mtctl %r1, %ipsw
load32 4f, %r1
mtctl %r1, %cr18 /* Set IIAOQ tail */
ldo 4(%r1), %r1
@@ -214,7 +217,7 @@
va = r8 /* virtual address for which the trap occured */
spc = r24 /* space for which the trap occured */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* itlb miss interruption handler (parisc 1.1 - 32 bit)
@@ -236,7 +239,7 @@
.macro itlb_20 code
mfctl %pcsq, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b itlb_miss_20w
#else
b itlb_miss_20
@@ -246,7 +249,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* naitlb miss interruption handler (parisc 1.1 - 32 bit)
*
@@ -283,7 +286,7 @@
.macro naitlb_20 code
mfctl %isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b itlb_miss_20w
#else
b itlb_miss_20
@@ -296,7 +299,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* dtlb miss interruption handler (parisc 1.1 - 32 bit)
*/
@@ -318,7 +321,7 @@
.macro dtlb_20 code
mfctl %isr, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b dtlb_miss_20w
#else
b dtlb_miss_20
@@ -328,7 +331,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */
.macro nadtlb_11 code
@@ -346,7 +349,7 @@
.macro nadtlb_20 code
mfctl %isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b nadtlb_miss_20w
#else
b nadtlb_miss_20
@@ -356,7 +359,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* dirty bit trap interruption handler (parisc 1.1 - 32 bit)
*/
@@ -378,7 +381,7 @@
.macro dbit_20 code
mfctl %isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b dbit_trap_20w
#else
b dbit_trap_20
@@ -391,7 +394,7 @@
/* The following are simple 32 vs 64 bit instruction
* abstractions for the macros */
.macro EXTR reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u \reg1,32+\start,\length,\reg2
#else
extrw,u \reg1,\start,\length,\reg2
@@ -399,7 +402,7 @@
.endm
.macro DEP reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depd \reg1,32+\start,\length,\reg2
#else
depw \reg1,\start,\length,\reg2
@@ -407,7 +410,7 @@
.endm
.macro DEPI val,start,length,reg
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi \val,32+\start,\length,\reg
#else
depwi \val,\start,\length,\reg
@@ -418,7 +421,7 @@
* fault. We have to extract this and place it in the va,
* zeroing the corresponding bits in the space register */
.macro space_adjust spc,va,tmp
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u \spc,63,SPACEID_SHIFT,\tmp
depd %r0,63,SPACEID_SHIFT,\spc
depd \tmp,31,SPACEID_SHIFT,\va
@@ -476,7 +479,7 @@
bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault
DEP %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
copy \pmd,%r9
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
shld %r9,PxD_VALUE_SHIFT,\pmd
#else
shlw %r9,PxD_VALUE_SHIFT,\pmd
@@ -607,7 +610,7 @@
.macro do_alias spc,tmp,tmp1,va,pte,prot,fault
cmpib,COND(<>),n 0,\spc,\fault
ldil L%(TMPALIAS_MAP_START),\tmp
-#if defined(__LP64__) && (TMPALIAS_MAP_START >= 0x80000000)
+#if defined(CONFIG_64BIT) && (TMPALIAS_MAP_START >= 0x80000000)
/* on LP64, ldi will sign extend into the upper 32 bits,
* which is behaviour we don't want */
depdi 0,31,32,\tmp
@@ -621,7 +624,7 @@
* OK, it is in the temp alias region, check whether "from" or "to".
* Check "subtle" note in pacache.S re: r23/r26.
*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u,*= \va,41,1,%r0
#else
extrw,u,= \va,9,1,%r0
@@ -688,7 +691,7 @@
def 30
def 31
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.export fault_vector_11
@@ -761,7 +764,7 @@
copy %r30, %r1
ldo PT_SZ_ALGN(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Yo, function pointers in wide mode are little structs... -PB */
ldd 24(%r26), %r2
STREG %r2, PT_GR27(%r1) /* Store childs %dp */
@@ -777,7 +780,7 @@
or %r26, %r24, %r26 /* will have kernel mappings. */
ldi 1, %r25 /* stack_start, signals kernel thread */
stw %r0, -52(%r30) /* user_tid */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
BL do_fork, %r2
@@ -806,7 +809,7 @@
LDREG TI_TASK-THREAD_SZ_ALGN(%r30), %r1
LDREG TASK_PT_GR25(%r1), %r26
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
LDREG TASK_PT_GR27(%r1), %r27
LDREG TASK_PT_GR22(%r1), %r22
#endif
@@ -814,11 +817,16 @@
ble 0(%sr7, %r1)
copy %r31, %r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
loadgp /* Thread could have been in a module */
#endif
+#ifndef CONFIG_64BIT
b sys_exit
+#else
+ load32 sys_exit, %r1
+ bv %r0(%r1)
+#endif
ldi 0, %r26
.import sys_execve, code
@@ -830,7 +838,7 @@
STREG %r26, PT_GR26(%r16)
STREG %r25, PT_GR25(%r16)
STREG %r24, PT_GR24(%r16)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
BL sys_execve, %r2
@@ -855,6 +863,7 @@
_switch_to:
STREG %r2, -RP_OFFSET(%r30)
+ callee_save_float
callee_save
load32 _switch_to_ret, %r2
@@ -871,6 +880,7 @@
_switch_to_ret:
mtctl %r0, %cr0 /* Needed for single stepping */
callee_rest
+ callee_rest_float
LDREG -RP_OFFSET(%r30), %r2
bv %r0(%r2)
@@ -888,9 +898,6 @@
* this way, then we will need to copy %sr3 in to PT_SR[3..7], and
* adjust IASQ[0..1].
*
- * Note that the following code uses a "relied upon translation".
- * See the parisc ACD for details. The ssm is necessary due to a
- * PCXT bug.
*/
.align 4096
@@ -911,7 +918,7 @@
STREG %r19,PT_IAOQ1(%r16)
LDREG PT_PSW(%r16),%r19
load32 USER_PSW_MASK,%r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
load32 USER_PSW_HI_MASK,%r20
depd %r20,31,32,%r1
#endif
@@ -955,7 +962,7 @@
/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount
** irq_stat[] is defined using ____cacheline_aligned.
*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
shld %r1, 6, %r20
#else
shlw %r1, 5, %r20
@@ -963,9 +970,6 @@
add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */
#endif /* CONFIG_SMP */
- LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */
- cmpib,<>,n 0,%r20,intr_do_softirq /* forward */
-
intr_check_resched:
/* check for reschedule */
@@ -985,24 +989,19 @@
rest_fp %r1
rest_general %r29
- /* Create a "relied upon translation" PA 2.0 Arch. F-5 */
- ssm 0,%r0
- nop
- nop
- nop
- nop
- nop
- nop
- nop
+ /* inverse of virt_map */
+ pcxt_ssm_bug
+ rsm PSW_SM_QUIET,%r0 /* prepare for rfi */
tophys_r1 %r29
- rsm (PSW_SM_Q|PSW_SM_P|PSW_SM_D|PSW_SM_I),%r0
/* Restore space id's and special cr's from PT_REGS
- * structure pointed to by r29 */
+ * structure pointed to by r29
+ */
rest_specials %r29
- /* Important: Note that rest_stack restores r29
- * last (we are using it)! It also restores r1 and r30. */
+ /* IMPORTANT: rest_stack restores r29 last (we are using it)!
+ * It also restores r1 and r30.
+ */
rest_stack
rfi
@@ -1015,17 +1014,6 @@
nop
nop
- .import do_softirq,code
-intr_do_softirq:
- bl do_softirq,%r2
-#ifdef __LP64__
- ldo -16(%r30),%r29 /* Reference param save area */
-#else
- nop
-#endif
- b intr_check_resched
- nop
-
.import schedule,code
intr_do_resched:
/* Only do reschedule if we are returning to user space */
@@ -1036,12 +1024,17 @@
CMPIB= 0,%r20,intr_restore /* backward */
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
ldil L%intr_check_sig, %r2
+#ifndef CONFIG_64BIT
b schedule
+#else
+ load32 schedule, %r20
+ bv %r0(%r20)
+#endif
ldo R%intr_check_sig(%r2), %r2
@@ -1064,7 +1057,7 @@
copy %r0, %r24 /* unsigned long in_syscall */
copy %r16, %r25 /* struct pt_regs *regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1088,7 +1081,7 @@
mfctl %cr31,%r1
copy %r30,%r17
/* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi 0,63,15,%r17
#else
depi 0,31,15,%r17
@@ -1115,7 +1108,7 @@
ldil L%intr_return, %r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1153,15 +1146,17 @@
CMPIB=,n 6,%r26,skip_save_ior
- /* save_specials left ipsw value in r8 for us to test */
mfctl %cr20, %r16 /* isr */
+ nop /* serialize mfctl on PA 2.0 to avoid 4 cycle penalty */
mfctl %cr21, %r17 /* ior */
-#ifdef __LP64__
+
+#ifdef CONFIG_64BIT
/*
* If the interrupted code was running with W bit off (32 bit),
* clear the b bits (bits 0 & 1) in the ior.
+ * save_specials left ipsw value in r8 for us to test.
*/
extrd,u,*<> %r8,PSW_W_BIT,1,%r0
depdi 0,1,2,%r17
@@ -1192,7 +1187,7 @@
loadgp
copy %r29, %r25 /* arg1 is pt_regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1230,7 +1225,7 @@
spc = r24 /* space for which the trap occured */
ptp = r25 /* page directory/page table pointer */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
dtlb_miss_20w:
space_adjust spc,va,t0
@@ -1487,10 +1482,10 @@
add,l %r1,%r24,%r1 /* doesn't affect c/b bits */
nadtlb_nullify:
- mfctl %cr22,%r8 /* Get ipsw */
+ mfctl %ipsw,%r8
ldil L%PSW_N,%r9
or %r8,%r9,%r8 /* Set PSW_N */
- mtctl %r8,%cr22
+ mtctl %r8,%ipsw
rfir
nop
@@ -1521,7 +1516,7 @@
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
itlb_miss_20w:
/*
@@ -1588,7 +1583,7 @@
#endif
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
dbit_trap_20w:
space_adjust spc,va,t0
@@ -1797,7 +1792,7 @@
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1847,7 +1842,7 @@
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1869,7 +1864,7 @@
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1897,10 +1892,10 @@
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
- bl \execve,%r2
+ BL \execve,%r2
copy %r1,%arg0
ldo -FRAME_SIZE(%r30),%r30
@@ -1923,7 +1918,7 @@
sys_execve_wrapper:
execve_wrapper sys_execve
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.export sys32_execve_wrapper
.import sys32_execve
@@ -1937,7 +1932,7 @@
ldo TASK_REGS(%r26),%r26 /* get pt regs */
/* Don't save regs, we are going to restore them from sigcontext. */
STREG %r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo FRAME_SIZE(%r30), %r30
BL sys_rt_sigreturn,%r2
ldo -16(%r30),%r29 /* Reference param save area */
@@ -1968,7 +1963,7 @@
ldo TASK_REGS(%r1),%r24 /* get pt regs */
LDREG TASK_PT_GR30(%r24),%r24
STREG %r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo FRAME_SIZE(%r30), %r30
b,l do_sigaltstack,%r2
ldo -16(%r30),%r29 /* Reference param save area */
@@ -1982,7 +1977,7 @@
bv %r0(%r2)
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.export sys32_sigaltstack_wrapper
sys32_sigaltstack_wrapper:
/* Get the user stack pointer */
@@ -2006,7 +2001,7 @@
reg_save %r24
STREG %r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo FRAME_SIZE(%r30), %r30
b,l sys_rt_sigsuspend,%r2
ldo -16(%r30),%r29 /* Reference param save area */
@@ -2079,7 +2074,7 @@
ldw TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */
/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
shld %r26, 6, %r20
#else
shlw %r26, 5, %r20
@@ -2087,9 +2082,6 @@
add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */
#endif /* CONFIG_SMP */
- LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */
- cmpib,<>,n 0,%r20,syscall_do_softirq /* forward */
-
syscall_check_resched:
/* check for reschedule */
@@ -2144,7 +2136,7 @@
depi 3,31,2,%r31 /* ensure return to user mode. */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* decide whether to reset the wide mode bit
*
* For a syscall, the W bit is stored in the lowest bit
@@ -2227,20 +2219,10 @@
b intr_restore
nop
- .import do_softirq,code
-syscall_do_softirq:
- bl do_softirq,%r2
- nop
- /* NOTE: We enable I-bit incase we schedule later,
- * and we might be going back to userspace if we were
- * traced. */
- b syscall_check_resched
- ssm PSW_SM_I, %r0 /* do_softirq returns with I bit off */
-
.import schedule,code
syscall_do_resched:
BL schedule,%r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#else
nop
@@ -2260,7 +2242,7 @@
ldi 1, %r24 /* unsigned long in_syscall */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
BL do_signal,%r2
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index f244fb2..553f8fe 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -83,15 +83,15 @@
int parisc_narrow_firmware = 1;
#endif
-/* on all currently-supported platforms, IODC I/O calls are always
- * 32-bit calls, and MEM_PDC calls are always the same width as the OS.
- * This means Cxxx boxes can't run wide kernels right now. -PB
+/* On most currently-supported platforms, IODC I/O calls are 32-bit calls
+ * and MEM_PDC calls are always the same width as the OS.
+ * Some PAT boxes may have 64-bit IODC I/O.
*
- * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on
- * systems with 32-bit MEM_PDC calls. This will allow wide kernels to
- * run on Cxxx boxes now. -RB
- *
- * Note that some PAT boxes may have 64-bit IODC I/O...
+ * Ryan Bradetich added the now obsolete CONFIG_PDC_NARROW to allow
+ * 64-bit kernels to run on systems with 32-bit MEM_PDC calls.
+ * This allowed wide kernels to run on Cxxx boxes.
+ * We now detect 32-bit-only PDC and dynamically switch to 32-bit mode
+ * when running a 64-bit kernel on such boxes (e.g. C200 or C360).
*/
#ifdef __LP64__
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 28405ed..0b47afc2 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -12,7 +12,7 @@
* Initial Version 04-23-1999 by Helge Deller <deller@gmx.de>
*/
-#include <linux/autoconf.h> /* for CONFIG_SMP */
+#include <linux/config.h> /* for CONFIG_SMP */
#include <asm/asm-offsets.h>
#include <asm/psw.h>
@@ -36,10 +36,10 @@
.align 4
.import init_thread_union,data
.import fault_vector_20,code /* IVA parisc 2.0 32 bit */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.import fault_vector_11,code /* IVA parisc 1.1 32 bit */
.import $global$ /* forward declaration */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
.export stext
.export _stext,data /* Kernel want it this way! */
_stext:
@@ -76,7 +76,7 @@
mtctl %r4,%cr24 /* Initialize kernel root pointer */
mtctl %r4,%cr25 /* Initialize user root pointer */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Set pmd in pgd */
load32 PA(pmd0),%r5
shrd %r5,PxD_VALUE_SHIFT,%r3
@@ -99,7 +99,7 @@
stw %r3,0(%r4)
ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
addib,> -1,%r1,1b
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo ASM_PMD_ENTRY_SIZE(%r4),%r4
#else
ldo ASM_PGD_ENTRY_SIZE(%r4),%r4
@@ -170,7 +170,7 @@
stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */
#endif /*CONFIG_SMP*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
tophys_r1 %sp
/* Save the rfi target address */
@@ -224,8 +224,6 @@
mtctl %r0,%cr12
mtctl %r0,%cr13
- /* Prepare to RFI! Man all the cannons! */
-
/* Initialize the global data pointer */
loadgp
@@ -235,7 +233,7 @@
* following short sequence of instructions can determine this
* (without being illegal on a PA1.1 machine).
*/
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
ldi 32,%r10
mtctl %r10,%cr11
.level 2.0
@@ -248,52 +246,22 @@
$is_pa20:
.level LEVEL /* restore 1.1 || 2.0w */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
load32 PA(fault_vector_20),%r10
$install_iva:
mtctl %r10,%cr14
-#ifdef __LP64__
- b aligned_rfi
+ b aligned_rfi /* Prepare to RFI! Man all the cannons! */
nop
- .align 256
+ .align 128
aligned_rfi:
- ssm 0,0
- nop /* 1 */
- nop /* 2 */
- nop /* 3 */
- nop /* 4 */
- nop /* 5 */
- nop /* 6 */
- nop /* 7 */
- nop /* 8 */
-#endif
+ pcxt_ssm_bug
-#ifdef __LP64__ /* move to psw.h? */
-#define PSW_BITS PSW_Q+PSW_I+PSW_D+PSW_P+PSW_R
-#else
-#define PSW_BITS PSW_SM_Q
-#endif
+ rsm PSW_SM_QUIET,%r0 /* off troublesome PSW bits */
+ /* Don't need NOPs, have 8 compliant insn before rfi */
-$rfi:
- /* turn off troublesome PSW bits */
- rsm PSW_BITS,%r0
-
- /* kernel PSW:
- * - no interruptions except HPMC and TOC (which are handled by PDC)
- * - Q bit set (IODC / PDC interruptions)
- * - big-endian
- * - virtually mapped
- */
- load32 KERNEL_PSW,%r10
- mtctl %r10,%ipsw
-
- /* Set the space pointers for the post-RFI world
- ** Clear the two-level IIA Space Queue, effectively setting
- ** Kernel space.
- */
mtctl %r0,%cr17 /* Clear IIASQ tail */
mtctl %r0,%cr17 /* Clear IIASQ head */
@@ -301,8 +269,11 @@
mtctl %r11,%cr18 /* IIAOQ head */
ldo 4(%r11),%r11
mtctl %r11,%cr18 /* IIAOQ tail */
+
+ load32 KERNEL_PSW,%r10
+ mtctl %r10,%ipsw
- /* Jump to hyperspace */
+ /* Jump through hyperspace to Virt Mode */
rfi
nop
@@ -313,7 +284,7 @@
.import smp_init_current_idle_task,data
.import smp_callin,code
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
smp_callin_rtn:
.proc
.callinfo
@@ -321,7 +292,7 @@
nop
nop
.procend
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
/***************************************************************************
* smp_slave_stext is executed by all non-monarch Processors when the Monarch
@@ -356,7 +327,7 @@
mtctl %r4,%cr24 /* Initialize kernel root pointer */
mtctl %r4,%cr25 /* Initialize user root pointer */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Setup PDCE_PROC entry */
copy %arg0,%r3
#else
@@ -373,7 +344,7 @@
.procend
#endif /* CONFIG_SMP */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.data
.align 4
@@ -383,4 +354,4 @@
.size $global$,4
$global$:
.word 0
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c
index 1d3824b..8cad8f0 100644
--- a/arch/parisc/kernel/ioctl32.c
+++ b/arch/parisc/kernel/ioctl32.c
@@ -104,12 +104,9 @@
}
out:
- if (kversion.name)
- kfree(kversion.name);
- if (kversion.date)
- kfree(kversion.date);
- if (kversion.desc)
- kfree(kversion.desc);
+ kfree(kversion.name);
+ kfree(kversion.date);
+ kfree(kversion.desc);
return ret;
}
@@ -166,9 +163,7 @@
ret = -EFAULT;
}
- if (karg.unique != NULL)
- kfree(karg.unique);
-
+ kfree(karg.unique);
return ret;
}
@@ -265,7 +260,6 @@
}
kfree(karg.list);
-
return ret;
}
@@ -305,7 +299,6 @@
out:
kfree(karg.list);
-
return ret;
}
@@ -494,15 +487,10 @@
}
out:
- if (karg.send_indices)
- kfree(karg.send_indices);
- if (karg.send_sizes)
- kfree(karg.send_sizes);
- if (karg.request_indices)
- kfree(karg.request_indices);
- if (karg.request_sizes)
- kfree(karg.request_sizes);
-
+ kfree(karg.send_indices);
+ kfree(karg.send_sizes);
+ kfree(karg.request_indices);
+ kfree(karg.request_sizes);
return ret;
}
@@ -555,9 +543,7 @@
ret = -EFAULT;
}
- if (karg.contexts)
- kfree(karg.contexts);
-
+ kfree(karg.contexts);
return ret;
}
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 77e03bc..9534ee1 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -26,7 +26,7 @@
* can be used.
*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#define ADDIB addib,*
#define CMPB cmpb,*
#define ANDCM andcm,*
@@ -40,8 +40,10 @@
.level 2.0
#endif
-#include <asm/assembly.h>
+#include <linux/config.h>
+
#include <asm/psw.h>
+#include <asm/assembly.h>
#include <asm/pgtable.h>
#include <asm/cache.h>
@@ -62,32 +64,23 @@
* to happen in real mode with all interruptions disabled.
*/
- /*
- * Once again, we do the rfi dance ... some day we need examine
- * all of our uses of this type of code and see what can be
- * consolidated.
- */
+ /* pcxt_ssm_bug - relied upon translation! PA 2.0 Arch. F-4 and F-5 */
+ rsm PSW_SM_I, %r19 /* save I-bit state */
+ load32 PA(1f), %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- rsm PSW_SM_I, %r19 /* relied upon translation! PA 2.0 Arch. F-5 */
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- rsm PSW_SM_Q, %r0 /* Turn off Q bit to load iia queue */
- ldil L%REAL_MODE_PSW, %r1
- ldo R%REAL_MODE_PSW(%r1), %r1
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%PA(1f), %r1
- ldo R%PA(1f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 REAL_MODE_PSW, %r1
+ mtctl %r1, %ipsw
rfi
nop
@@ -178,29 +171,36 @@
ADDIB> -1, %r22, fdtoneloop /* Outer loop count decr */
add %r21, %r20, %r20 /* increment space */
+
fdtdone:
+ /*
+ * Switch back to virtual mode
+ */
+ /* pcxt_ssm_bug */
+ rsm PSW_SM_I, %r0
+ load32 2f, %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- /* Switch back to virtual mode */
-
- rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */
- ldil L%KERNEL_PSW, %r1
- ldo R%KERNEL_PSW(%r1), %r1
- or %r1, %r19, %r1 /* Set I bit if set on entry */
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%(2f), %r1
- ldo R%(2f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 KERNEL_PSW, %r1
+ or %r1, %r19, %r1 /* I-bit to state on entry */
+ mtctl %r1, %ipsw /* restore I-bit (entire PSW) */
rfi
nop
2: bv %r0(%r2)
nop
- .exit
+ .exit
.procend
.export flush_instruction_cache_local,code
@@ -227,7 +227,7 @@
fimanyloop: /* Loop if LOOP >= 2 */
ADDIB> -1, %r31, fimanyloop /* Adjusted inner loop decr */
- fice 0(%sr1, %arg0)
+ fice %r0(%sr1, %arg0)
fice,m %arg1(%sr1, %arg0) /* Last fice and addr adjust */
movb,tr %arg3, %r31, fimanyloop /* Re-init inner loop count */
ADDIB<=,n -1, %arg2, fisync /* Outer loop decr */
@@ -238,7 +238,7 @@
fisync:
sync
- mtsm %r22
+ mtsm %r22 /* restore I-bit */
bv %r0(%r2)
nop
.exit
@@ -269,7 +269,7 @@
fdmanyloop: /* Loop if LOOP >= 2 */
ADDIB> -1, %r31, fdmanyloop /* Adjusted inner loop decr */
- fdce 0(%sr1, %arg0)
+ fdce %r0(%sr1, %arg0)
fdce,m %arg1(%sr1, %arg0) /* Last fdce and addr adjust */
movb,tr %arg3, %r31, fdmanyloop /* Re-init inner loop count */
ADDIB<=,n -1, %arg2, fdsync /* Outer loop decr */
@@ -281,7 +281,7 @@
fdsync:
syncdma
sync
- mtsm %r22
+ mtsm %r22 /* restore I-bit */
bv %r0(%r2)
nop
.exit
@@ -296,7 +296,7 @@
.callinfo NO_CALLS
.entry
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* PA8x00 CPUs can consume 2 loads or 1 store per cycle.
* Unroll the loop by hand and arrange insn appropriately.
* GCC probably can do this just as well.
@@ -351,7 +351,11 @@
std %r22, 120(%r26)
ldo 128(%r26), %r26
- ADDIB> -1, %r1, 1b /* bundle 10 */
+ /* conditional branches nullify on forward taken branch, and on
+ * non-taken backward branch. Note that .+4 is a backwards branch.
+ * The ldd should only get executed if the branch is taken.
+ */
+ ADDIB>,n -1, %r1, 1b /* bundle 10 */
ldd 0(%r25), %r19 /* start next loads */
#else
@@ -363,10 +367,10 @@
* the full 64 bit register values on interrupt, we can't
* use ldd/std on a 32 bit kernel.
*/
+ ldw 0(%r25), %r19
ldi 64, %r1 /* PAGE_SIZE/64 == 64 */
1:
- ldw 0(%r25), %r19
ldw 4(%r25), %r20
ldw 8(%r25), %r21
ldw 12(%r25), %r22
@@ -396,11 +400,12 @@
ldw 60(%r25), %r22
stw %r19, 48(%r26)
stw %r20, 52(%r26)
+ ldo 64(%r25), %r25
stw %r21, 56(%r26)
stw %r22, 60(%r26)
ldo 64(%r26), %r26
- ADDIB> -1, %r1, 1b
- ldo 64(%r25), %r25
+ ADDIB>,n -1, %r1, 1b
+ ldw 0(%r25), %r19
#endif
bv %r0(%r2)
nop
@@ -456,7 +461,7 @@
sub %r25, %r1, %r23 /* move physical addr into non shadowed reg */
ldil L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u %r26,56,32, %r26 /* convert phys addr to tlb insert format */
extrd,u %r23,56,32, %r23 /* convert phys addr to tlb insert format */
depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */
@@ -543,7 +548,7 @@
tophys_r1 %r26
ldil L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#if (TMPALIAS_MAP_START >= 0x80000000)
depdi 0, 31,32, %r28 /* clear any sign extension */
#endif
@@ -560,7 +565,7 @@
pdtlb 0(%r28)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldi 32, %r1 /* PAGE_SIZE/128 == 32 */
/* PREFETCH (Write) has not (yet) been proven to help here */
@@ -585,7 +590,7 @@
ADDIB> -1, %r1, 1b
ldo 128(%r28), %r28
-#else /* ! __LP64 */
+#else /* ! CONFIG_64BIT */
ldi 64, %r1 /* PAGE_SIZE/64 == 64 */
@@ -608,7 +613,7 @@
stw %r0, 60(%r28)
ADDIB> -1, %r1, 1b
ldo 64(%r28), %r28
-#endif /* __LP64 */
+#endif /* CONFIG_64BIT */
bv %r0(%r2)
nop
@@ -626,7 +631,7 @@
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -670,7 +675,7 @@
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1,63-PAGE_SHIFT,1, %r25
#else
depwi,z 1,31-PAGE_SHIFT,1, %r25
@@ -714,7 +719,7 @@
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -759,7 +764,7 @@
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -807,7 +812,7 @@
tophys_r1 %r26
ldil L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */
depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */
depdi 0, 63,12, %r28 /* Clear any offset bits */
@@ -824,7 +829,7 @@
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r29
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r29
@@ -935,7 +940,7 @@
ldil L%icache_stride, %r1
ldw R%icache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -944,23 +949,23 @@
sub %r25, %r23, %r25
-1: fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
+1: fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
CMPB<< %r26, %r25, 1b
- fic,m %r23(%r26)
+ fic,m %r23(%sr4, %r26)
sync
bv %r0(%r2)
@@ -982,17 +987,18 @@
ANDCM %r26, %r21, %r26
1: CMPB<<,n %r26, %r25, 1b
- fic,m %r23(%r26)
+ fic,m %r23(%sr4, %r26)
sync
bv %r0(%r2)
nop
.exit
-
.procend
- .align 128
-
+ /* align should cover use of rfi in disable_sr_hashing_asm and
+ * srdis_done.
+ */
+ .align 256
.export disable_sr_hashing_asm,code
disable_sr_hashing_asm:
@@ -1000,28 +1006,26 @@
.callinfo NO_CALLS
.entry
- /* Switch to real mode */
+ /*
+ * Switch to real mode
+ */
+ /* pcxt_ssm_bug */
+ rsm PSW_SM_I, %r0
+ load32 PA(1f), %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- ssm 0, %r0 /* relied upon translation! */
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- rsm (PSW_SM_Q|PSW_SM_I), %r0 /* disable Q&I to load the iia queue */
- ldil L%REAL_MODE_PSW, %r1
- ldo R%REAL_MODE_PSW(%r1), %r1
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%PA(1f), %r1
- ldo R%PA(1f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 REAL_MODE_PSW, %r1
+ mtctl %r1, %ipsw
rfi
nop
@@ -1053,27 +1057,31 @@
srdis_pa20:
- /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+ */
+ /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+,PCXW2 */
.word 0x144008bc /* mfdiag %dr2, %r28 */
depdi 0, 54,1, %r28 /* clear DIAG_SPHASH_ENAB (bit 54) */
.word 0x145c1840 /* mtdiag %r28, %dr2 */
+
srdis_done:
-
/* Switch back to virtual mode */
+ rsm PSW_SM_I, %r0 /* prep to load iia queue */
+ load32 2f, %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */
- ldil L%KERNEL_PSW, %r1
- ldo R%KERNEL_PSW(%r1), %r1
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%(2f), %r1
- ldo R%(2f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 KERNEL_PSW, %r1
+ mtctl %r1, %ipsw
rfi
nop
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 844c287..ae6213d 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -31,7 +31,7 @@
#include <asm/page.h> /* get_order */
#include <asm/pgalloc.h>
#include <asm/uaccess.h>
-
+#include <asm/tlbflush.h> /* for purge_tlb_*() macros */
static struct proc_dir_entry * proc_gsc_root = NULL;
static int pcxl_proc_info(char *buffer, char **start, off_t offset, int length);
@@ -333,18 +333,28 @@
static int __init
pcxl_dma_init(void)
{
- if (pcxl_dma_start == 0)
- return 0;
+ if (pcxl_dma_start == 0)
+ return 0;
- spin_lock_init(&pcxl_res_lock);
- pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
- pcxl_res_hint = 0;
- pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
+ spin_lock_init(&pcxl_res_lock);
+ pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
+ pcxl_res_hint = 0;
+ pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
get_order(pcxl_res_size));
- memset(pcxl_res_map, 0, pcxl_res_size);
- proc_gsc_root = proc_mkdir("gsc", 0);
- create_proc_info_entry("dino", 0, proc_gsc_root, pcxl_proc_info);
- return 0;
+ memset(pcxl_res_map, 0, pcxl_res_size);
+ proc_gsc_root = proc_mkdir("gsc", 0);
+ if (!proc_gsc_root)
+ printk(KERN_WARNING
+ "pcxl_dma_init: Unable to create gsc /proc dir entry\n");
+ else {
+ struct proc_dir_entry* ent;
+ ent = create_proc_info_entry("pcxl_dma", 0,
+ proc_gsc_root, pcxl_proc_info);
+ if (!ent)
+ printk(KERN_WARNING
+ "pci-dma.c: Unable to create pcxl_dma /proc entry.\n");
+ }
+ return 0;
}
__initcall(pcxl_dma_init);
@@ -545,16 +555,16 @@
static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
{
+#if 0
u_long i = 0;
unsigned long *res_ptr = (u_long *)pcxl_res_map;
- unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */
+#endif
+ unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */
- sprintf(buf, "\nDMA Mapping Area size : %d bytes (%d pages)\n",
- PCXL_DMA_MAP_SIZE,
- (pcxl_res_size << 3) ); /* 1 bit per page */
+ sprintf(buf, "\nDMA Mapping Area size : %d bytes (%ld pages)\n",
+ PCXL_DMA_MAP_SIZE, total_pages);
- sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n",
- buf, pcxl_res_size, pcxl_res_size << 3); /* 8 bits per byte */
+ sprintf(buf, "%sResource bitmap : %d bytes\n", buf, pcxl_res_size);
strcat(buf, " total: free: used: % used:\n");
sprintf(buf, "%sblocks %8d %8ld %8ld %8ld%%\n", buf, pcxl_res_size,
@@ -564,7 +574,8 @@
sprintf(buf, "%spages %8ld %8ld %8ld %8ld%%\n", buf, total_pages,
total_pages - pcxl_used_pages, pcxl_used_pages,
(pcxl_used_pages * 100 / total_pages));
-
+
+#if 0
strcat(buf, "\nResource bitmap:");
for(; i < (pcxl_res_size / sizeof(u_long)); ++i, ++res_ptr) {
@@ -572,6 +583,7 @@
strcat(buf,"\n ");
sprintf(buf, "%s %08lx", buf, *res_ptr);
}
+#endif
strcat(buf, "\n");
return strlen(buf);
}
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index e6a891a..88cba49 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -202,7 +202,8 @@
pcibios_link_hba_resources( struct resource *hba_res, struct resource *r)
{
if (!r->parent) {
- printk(KERN_EMERG "PCI: Tell willy he's wrong\n");
+ printk(KERN_EMERG "PCI: resource not parented! [%lx-%lx]\n",
+ r->start, r->end);
r->parent = hba_res;
/* reverse link is harder *sigh* */
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 01f676d..215d78c 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -41,7 +41,7 @@
/* Define EARLY_BOOTUP_DEBUG to debug kernel related boot problems.
* On production kernels EARLY_BOOTUP_DEBUG should be undefined. */
-#undef EARLY_BOOTUP_DEBUG
+#define EARLY_BOOTUP_DEBUG
#include <linux/config.h>
@@ -49,14 +49,8 @@
#include <linux/console.h>
#include <linux/string.h>
#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/tty.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/system.h>
#include <asm/pdc.h> /* for iodc_call() proto and friends */
@@ -96,7 +90,6 @@
}
#if defined(CONFIG_PDC_CONSOLE)
-#define PDC_CONSOLE_DEVICE pdc_console_device
static struct tty_driver * pdc_console_device (struct console *c, int *index)
{
extern struct tty_driver console_driver;
@@ -104,22 +97,19 @@
return &console_driver;
}
#else
-#define PDC_CONSOLE_DEVICE NULL
+#define pdc_console_device NULL
#endif
static struct console pdc_cons = {
.name = "ttyB",
.write = pdc_console_write,
- .device = PDC_CONSOLE_DEVICE,
+ .device = pdc_console_device,
.setup = pdc_console_setup,
- .flags = CON_BOOT|CON_PRINTBUFFER|CON_ENABLED,
+ .flags = CON_BOOT | CON_PRINTBUFFER | CON_ENABLED,
.index = -1,
};
static int pdc_console_initialized;
-extern unsigned long con_start; /* kernel/printk.c */
-extern unsigned long log_end; /* kernel/printk.c */
-
static void pdc_console_init_force(void)
{
@@ -146,27 +136,11 @@
}
-/* Unregister the pdc console with the printk console layer */
-void pdc_console_die(void)
-{
- if (!pdc_console_initialized)
- return;
- --pdc_console_initialized;
-
- printk(KERN_INFO "Switching from PDC console\n");
-
- /* Don't repeat what we've already printed */
- con_start = log_end;
-
- unregister_console(&pdc_cons);
-}
-
-
/*
* Used for emergencies. Currently only used if an HPMC occurs. If an
* HPMC occurs, it is possible that the current console may not be
- * properly initialed after the PDC IO reset. This routine unregisters all
- * of the current consoles, reinitializes the pdc console and
+ * properly initialised after the PDC IO reset. This routine unregisters
+ * all of the current consoles, reinitializes the pdc console and
* registers it.
*/
@@ -177,13 +151,13 @@
if (pdc_console_initialized)
return;
+ /* If we've already seen the output, don't bother to print it again */
+ if (console_drivers != NULL)
+ pdc_cons.flags &= ~CON_PRINTBUFFER;
+
while ((console = console_drivers) != NULL)
unregister_console(console_drivers);
- /* Don't repeat what we've already printed */
- con_start = log_end;
-
/* force registering the pdc console */
pdc_console_init_force();
}
-
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index b3ad0a5..44670d6 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -746,7 +746,8 @@
uint64_t *bptr;
uint32_t dwords;
uint32_t *intrigue_rdr;
- uint64_t *intrigue_bitmask, tmp64, proc_hpa;
+ uint64_t *intrigue_bitmask, tmp64;
+ void __iomem *runway;
struct rdr_tbl_ent *tentry;
int i;
@@ -798,15 +799,16 @@
return -1;
}
- proc_hpa = cpu_device->hpa;
+ runway = ioremap(cpu_device->hpa.start, 4096);
/* Merge intrigue bits into Runway STATUS 0 */
- tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful;
- __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS);
+ tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful;
+ __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul),
+ runway + RUNWAY_STATUS);
/* Write RUNWAY DEBUG registers */
for (i = 0; i < 8; i++) {
- __raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i);
+ __raw_writeq(*memaddr++, runway + RUNWAY_DEBUG);
}
return 0;
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 46b7593..7fdca87 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -9,7 +9,7 @@
* Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org>
* Copyright (C) 2000 Philipp Rumpf <prumpf with tux.org>
* Copyright (C) 2000 David Kennedy <dkennedy with linuxcare.com>
- * Copyright (C) 2000 Richard Hirst <rhirst with parisc-lixux.org>
+ * Copyright (C) 2000 Richard Hirst <rhirst with parisc-linux.org>
* Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org>
* Copyright (C) 2001 Alan Modra <amodra at parisc-linux.org>
* Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org>
@@ -245,7 +245,17 @@
sys_clone(unsigned long clone_flags, unsigned long usp,
struct pt_regs *regs)
{
- int __user *user_tid = (int __user *)regs->gr[26];
+ /* Arugments from userspace are:
+ r26 = Clone flags.
+ r25 = Child stack.
+ r24 = parent_tidptr.
+ r23 = Is the TLS storage descriptor
+ r22 = child_tidptr
+
+ However, these last 3 args are only examined
+ if the proper flags are set. */
+ int __user *child_tidptr;
+ int __user *parent_tidptr;
/* usp must be word aligned. This also prevents users from
* passing in the value 1 (which is the signal for a special
@@ -253,10 +263,20 @@
usp = ALIGN(usp, 4);
/* A zero value for usp means use the current stack */
- if(usp == 0)
- usp = regs->gr[30];
+ if (usp == 0)
+ usp = regs->gr[30];
- return do_fork(clone_flags, usp, regs, 0, user_tid, NULL);
+ if (clone_flags & CLONE_PARENT_SETTID)
+ parent_tidptr = (int __user *)regs->gr[24];
+ else
+ parent_tidptr = NULL;
+
+ if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID))
+ child_tidptr = (int __user *)regs->gr[22];
+ else
+ child_tidptr = NULL;
+
+ return do_fork(clone_flags, usp, regs, 0, parent_tidptr, child_tidptr);
}
int
@@ -332,6 +352,10 @@
} else {
cregs->kpc = (unsigned long) &child_return;
}
+ /* Setup thread TLS area from the 4th parameter in clone */
+ if (clone_flags & CLONE_SETTLS)
+ cregs->cr27 = pregs->gr[23];
+
}
return 0;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index 13b721c..4f5bbcf 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -92,7 +92,7 @@
* May get overwritten by PAT code.
*/
cpuid = boot_cpu_data.cpu_count;
- txn_addr = dev->hpa; /* for legacy PDC */
+ txn_addr = dev->hpa.start; /* for legacy PDC */
#ifdef __LP64__
if (is_pdc_pat()) {
@@ -122,7 +122,7 @@
* boot time (ie shutdown a CPU from an OS perspective).
*/
/* get the cpu number */
- status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa);
+ status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start);
BUG_ON(PDC_OK != status);
@@ -130,7 +130,7 @@
printk(KERN_WARNING "IGNORING CPU at 0x%x,"
" cpu_slot_id > NR_CPUS"
" (%ld > %d)\n",
- dev->hpa, cpu_info.cpu_num, NR_CPUS);
+ dev->hpa.start, cpu_info.cpu_num, NR_CPUS);
/* Ignore CPU since it will only crash */
boot_cpu_data.cpu_count--;
return 1;
@@ -149,7 +149,7 @@
p->loops_per_jiffy = loops_per_jiffy;
p->dev = dev; /* Save IODC data in case we need it */
- p->hpa = dev->hpa; /* save CPU hpa */
+ p->hpa = dev->hpa.start; /* save CPU hpa */
p->cpuid = cpuid; /* save CPU id */
p->txn_addr = txn_addr; /* save CPU IRQ address */
#ifdef CONFIG_SMP
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 8dd5def..8c2859c 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -7,8 +7,10 @@
* Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com)
*
*/
-#include <asm/assembly.h>
+#include <linux/config.h>
+
#include <asm/psw.h>
+#include <asm/assembly.h>
.section .bss
.export real_stack
@@ -20,7 +22,7 @@
real64_stack:
.block 8192
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
# define REG_SZ 8
#else
# define REG_SZ 4
@@ -50,7 +52,7 @@
real32_call_asm:
STREG %rp, -RP_OFFSET(%sp) /* save RP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
callee_save
ldo 2*REG_SZ(%sp), %sp /* room for a couple more saves */
STREG %r27, -1*REG_SZ(%sp)
@@ -77,7 +79,7 @@
b,l save_control_regs,%r2 /* modifies r1, r2, r28 */
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
rsm PSW_SM_W, %r0 /* go narrow */
#endif
@@ -85,7 +87,7 @@
bv 0(%r31)
nop
ric_ret:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ssm PSW_SM_W, %r0 /* go wide */
#endif
/* restore CRs before going virtual in case we page fault */
@@ -97,7 +99,7 @@
tovirt_r1 %sp
LDREG -REG_SZ(%sp), %sp /* restore SP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
LDREG -1*REG_SZ(%sp), %r27
LDREG -2*REG_SZ(%sp), %r29
ldo -2*REG_SZ(%sp), %sp
@@ -143,24 +145,21 @@
/* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for
* more general-purpose use by the several places which need RFIs
*/
- .align 128
.text
+ .align 128
rfi_virt2real:
/* switch to real mode... */
- ssm 0,0 /* See "relied upon translation" */
- nop /* PA 2.0 Arch. F-5 */
- nop
- nop
+ rsm PSW_SM_I,%r0
+ load32 PA(rfi_v2r_1), %r1
nop
nop
nop
nop
nop
- rsm (PSW_SM_Q|PSW_SM_I),%r0 /* disable Q & I bits to load iia queue */
+ rsm PSW_SM_Q,%r0 /* disable Q & I bits to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- load32 PA(rfi_v2r_1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
@@ -184,10 +183,8 @@
.text
.align 128
rfi_real2virt:
- ssm 0,0 /* See "relied upon translation" */
- nop /* PA 2.0 Arch. F-5 */
- nop
- nop
+ rsm PSW_SM_I,%r0
+ load32 (rfi_r2v_1), %r1
nop
nop
nop
@@ -197,7 +194,6 @@
rsm PSW_SM_Q,%r0 /* disable Q bit to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- load32 (rfi_r2v_1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
@@ -218,7 +214,7 @@
bv 0(%r2)
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/************************ 64-bit real-mode calls ***********************/
/* This is only usable in wide kernels right now and will probably stay so */
@@ -296,7 +292,7 @@
** comparing function pointers.
*/
__canonicalize_funcptr_for_compare:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
bve (%r2)
#else
bv %r0(%r2)
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 0224651..82c24e6 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -490,15 +490,7 @@
give_sigsegv:
DBG(1,"setup_rt_frame: sending SIGSEGV\n");
- if (sig == SIGSEGV)
- ka->sa.sa_handler = SIG_DFL;
- si.si_signo = SIGSEGV;
- si.si_errno = 0;
- si.si_code = SI_KERNEL;
- si.si_pid = current->pid;
- si.si_uid = current->uid;
- si.si_addr = frame;
- force_sig_info(SIGSEGV, &si, current);
+ force_sigsegv(sig, current);
return 0;
}
@@ -633,10 +625,14 @@
put_user(0xe0008200, &usp[3]);
put_user(0x34140000, &usp[4]);
- /* Stack is 64-byte aligned, and we only
- * need to flush 1 cache line */
- asm("fdc 0(%%sr3, %0)\n"
- "fic 0(%%sr3, %0)\n"
+ /* Stack is 64-byte aligned, and we only need
+ * to flush 1 cache line.
+ * Flushing one cacheline is cheap.
+ * "sync" on bigger (> 4 way) boxes is not.
+ */
+ asm("fdc %%r0(%%sr3, %0)\n"
+ "sync\n"
+ "fic %%r0(%%sr3, %0)\n"
"sync\n"
: : "r"(regs->gr[30]));
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index bcc7e83..5db3be4 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -18,7 +18,7 @@
*/
#undef ENTRY_SYS_CPUS /* syscall support for iCOD-like functionality */
-#include <linux/autoconf.h>
+#include <linux/config.h>
#include <linux/types.h>
#include <linux/spinlock.h>
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 8c7a718..b29b76b4 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -6,6 +6,7 @@
* thanks to Philipp Rumpf, Mike Shaver and various others
* sorry about the wall, puffin..
*/
+#include <linux/config.h> /* for CONFIG_SMP */
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
@@ -22,15 +23,13 @@
*/
#define KILL_INSN break 0,0
-#include <linux/config.h> /* for CONFIG_SMP */
-
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.level 2.0w
#else
.level 1.1
#endif
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.macro fixup_branch,lbl
b \lbl
.endm
@@ -103,7 +102,7 @@
mfsp %sr7,%r1 /* save user sr7 */
mtsp %r1,%sr3 /* and store it in sr3 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* for now we can *always* set the W bit on entry to the syscall
* since we don't support wide userland processes. We could
* also save the current SM other than in r0 and restore it on
@@ -155,7 +154,7 @@
STREG %r19, TASK_PT_GR19(%r1)
LDREGM -FRAME_SIZE(%r30), %r2 /* get users sp back */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u %r2,63,1,%r19 /* W hidden in bottom bit */
#if 0
xor %r19,%r2,%r2 /* clear bottom bit */
@@ -186,7 +185,7 @@
loadgp
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
copy %r19,%r2 /* W bit back to r2 */
#else
@@ -205,7 +204,7 @@
/* Note! We cannot use the syscall table that is mapped
nearby since the gateway page is mapped execute-only. */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldil L%sys_call_table, %r1
or,= %r2,%r2,%r2
addil L%(sys_call_table64-sys_call_table), %r1
@@ -321,7 +320,7 @@
LDREG TASK_PT_GR25(%r1), %r25
LDREG TASK_PT_GR24(%r1), %r24
LDREG TASK_PT_GR23(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
LDREG TASK_PT_GR22(%r1), %r22
LDREG TASK_PT_GR21(%r1), %r21
ldo -16(%r30),%r29 /* Reference param save area */
@@ -350,7 +349,7 @@
tracesys_exit:
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG TI_TASK(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
bl syscall_trace, %r2
@@ -371,7 +370,7 @@
tracesys_sigexit:
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG 0(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
bl syscall_trace, %r2
@@ -404,7 +403,7 @@
gate .+8, %r0
depi 3, 31, 2, %r31 /* Ensure we return to userspace */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* FIXME: If we are a 64-bit kernel just
* turn this on unconditionally.
*/
@@ -440,7 +439,7 @@
/* Fall through: Return to userspace */
lws_exit:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* decide whether to reset the wide mode bit
*
* For a syscall, the W bit is stored in the lowest bit
@@ -486,7 +485,7 @@
/* ELF64 Process entry path */
lws_compare_and_swap64:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b,n lws_compare_and_swap
#else
/* If we are not a 64-bit kernel, then we don't
@@ -497,7 +496,7 @@
/* ELF32 Process entry path */
lws_compare_and_swap32:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Clip all the input registers */
depdi 0, 31, 32, %r26
depdi 0, 31, 32, %r25
@@ -608,7 +607,7 @@
the other for the store. Either return -EFAULT.
Each of the entries must be relocated. */
.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Pad the address calculation */
.word 0,(2b - linux_gateway_page)
.word 0,(3b - linux_gateway_page)
@@ -619,7 +618,7 @@
.previous
.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Pad the address calculation */
.word 0,(1b - linux_gateway_page)
.word 0,(3b - linux_gateway_page)
@@ -638,7 +637,7 @@
/* Relocate symbols assuming linux_gateway_page is mapped
to virtual address 0x0 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* FIXME: The code will always be on the gateay page
and thus it will be on the first 4k, the
assembler seems to think that the final
@@ -666,7 +665,7 @@
sys_call_table:
#include "syscall_table.S"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.align 4096
.export sys_call_table64
.Lsys_call_table64:
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index dcfa4d3..32cbc04 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -35,7 +35,7 @@
#undef ENTRY_UHOH
#undef ENTRY_COMP
#undef ENTRY_OURS
-#if defined(__LP64__) && !defined(SYSCALL_TABLE_64BIT)
+#if defined(CONFIG_64BIT) && !defined(SYSCALL_TABLE_64BIT)
/* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and
* narrow palinux. Use ENTRY_DIFF for those where a 32-bit specific
* implementation is required on wide palinux. Use ENTRY_COMP where
@@ -46,7 +46,7 @@
#define ENTRY_UHOH(_name_) .dword sys32_##unimplemented
#define ENTRY_OURS(_name_) .dword parisc_##_name_
#define ENTRY_COMP(_name_) .dword compat_sys_##_name_
-#elif defined(__LP64__) && defined(SYSCALL_TABLE_64BIT)
+#elif defined(CONFIG_64BIT) && defined(SYSCALL_TABLE_64BIT)
#define ENTRY_SAME(_name_) .dword sys_##_name_
#define ENTRY_DIFF(_name_) .dword sys_##_name_
#define ENTRY_UHOH(_name_) .dword sys_##_name_
@@ -368,5 +368,11 @@
ENTRY_COMP(mbind) /* 260 */
ENTRY_COMP(get_mempolicy)
ENTRY_COMP(set_mempolicy)
+ ENTRY_SAME(ni_syscall) /* 263: reserved for vserver */
+ ENTRY_SAME(add_key)
+ ENTRY_SAME(request_key) /* 265 */
+ ENTRY_SAME(keyctl)
+ ENTRY_SAME(ioprio_set)
+ ENTRY_SAME(ioprio_get)
/* Nothing yet */
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 7ff67f8..bc979e1 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -89,14 +89,6 @@
}
}
-#ifdef CONFIG_CHASSIS_LCD_LED
- /* Only schedule the led tasklet on cpu 0, and only if it
- * is enabled.
- */
- if (cpu == 0 && !atomic_read(&led_tasklet.count))
- tasklet_schedule(&led_tasklet);
-#endif
-
/* check soft power switch status */
if (cpu == 0 && !atomic_read(&power_tasklet.count))
tasklet_schedule(&power_tasklet);
@@ -104,6 +96,24 @@
return IRQ_HANDLED;
}
+
+unsigned long profile_pc(struct pt_regs *regs)
+{
+ unsigned long pc = instruction_pointer(regs);
+
+ if (regs->gr[0] & PSW_N)
+ pc -= 4;
+
+#ifdef CONFIG_SMP
+ if (in_lock_functions(pc))
+ pc = regs->gr[2];
+#endif
+
+ return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+
+
/*** converted from ia64 ***/
/*
* Return the number of micro-seconds that elapsed since the last
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index d2e5b22..15914f0 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -74,7 +74,10 @@
char *level;
unsigned long cr30;
unsigned long cr31;
-
+ /* carlos says that gcc understands better memory in a struct,
+ * and it makes our life easier with fpregs -- T-Bone */
+ struct { u32 sw[2]; } s;
+
level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
printk("%s\n", level); /* don't want to have that pretty register dump messed up */
@@ -103,11 +106,33 @@
printk("%s\n", buf);
}
-#if RIDICULOUSLY_VERBOSE
- for (i = 0; i < 32; i += 2)
- printk("%sFR%02d : %016lx FR%2d : %016lx", level, i,
- regs->fr[i], i+1, regs->fr[i+1]);
-#endif
+ /* FR are 64bit everywhere. Need to use asm to get the content
+ * of fpsr/fper1, and we assume that we won't have a FP Identify
+ * in our way, otherwise we're screwed.
+ * The fldd is used to restore the T-bit if there was one, as the
+ * store clears it anyway.
+ * BTW, PA2.0 book says "thou shall not use fstw on FPSR/FPERs". */
+ __asm__ (
+ "fstd %%fr0,0(%1) \n\t"
+ "fldd 0(%1),%%fr0 \n\t"
+ : "=m" (s) : "r" (&s) : "%r0"
+ );
+
+ printk("%s\n", level);
+ printk("%s VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level);
+ printbinary(buf, s.sw[0], 32);
+ printk("%sFPSR: %s\n", level, buf);
+ printk("%sFPER1: %08x\n", level, s.sw[1]);
+
+ /* here we'll print fr0 again, tho it'll be meaningless */
+ for (i = 0; i < 32; i += 4) {
+ int j;
+ p = buf;
+ p += sprintf(p, "%sfr%02d-%02d ", level, i, i + 3);
+ for (j = 0; j < 4; j++)
+ p += sprintf(p, " %016llx", (i+j) == 0 ? 0 : regs->fr[i+j]);
+ printk("%s\n", buf);
+ }
cr30 = mfctl(30);
cr31 = mfctl(31);
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index 62eea35..eaae8a0 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -513,15 +513,18 @@
register int flop=0; /* true if this is a flop */
/* log a message with pacing */
- if (user_mode(regs))
- {
- if (unaligned_count > 5 && jiffies - last_time > 5*HZ)
- {
+ if (user_mode(regs)) {
+ if (current->thread.flags & PARISC_UAC_SIGBUS) {
+ goto force_sigbus;
+ }
+
+ if (unaligned_count > 5 && jiffies - last_time > 5*HZ) {
unaligned_count = 0;
last_time = jiffies;
}
- if (++unaligned_count < 5)
- {
+
+ if (!(current->thread.flags & PARISC_UAC_NOPRINT)
+ && ++unaligned_count < 5) {
char buf[256];
sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n",
current->comm, current->pid, regs->ior, regs->iaoq[0]);
@@ -530,6 +533,7 @@
show_regs(regs);
#endif
}
+
if (!unaligned_enabled)
goto force_sigbus;
}
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index 1b91612..e0661c2 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -35,7 +35,7 @@
extrd,u \t2,63,32,\t2
#endif
/* t2 = &__per_cpu_offset[smp_processor_id()]; */
- LDREG,s \t2(\t1),\t2
+ LDREGX \t2(\t1),\t2
addil LT%per_cpu__exception_data,%r27
LDREG RT%per_cpu__exception_data(%r1),\t1
/* t1 = &__get_cpu_var(exception_data) */
@@ -53,6 +53,8 @@
.endm
#endif
+ .level LEVEL
+
.text
.section .fixup, "ax"
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index feb1b9f..b709803 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -339,6 +339,7 @@
pds = (double *)pcs;
pdd = (double *)pcd;
+#if 0
/* Copy 8 doubles at a time */
while (len >= 8*sizeof(double)) {
register double r1, r2, r3, r4, r5, r6, r7, r8;
@@ -366,6 +367,7 @@
fstdma(d_space, r8, pdd, pmc_store_exc);
len -= 8*sizeof(double);
}
+#endif
pws = (unsigned int *)pds;
pwd = (unsigned int *)pdd;
diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c
index 6b2eb6f..2a7d7ae 100644
--- a/drivers/base/attribute_container.c
+++ b/drivers/base/attribute_container.c
@@ -19,6 +19,8 @@
#include <linux/list.h>
#include <linux/module.h>
+#include "base.h"
+
/* This is a private structure used to tie the classdev and the
* container .. it should never be visible outside this file */
struct internal_container {
diff --git a/drivers/base/base.h b/drivers/base/base.h
index 783752b..e3b548d 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -1,3 +1,15 @@
+
+/* initialisation functions */
+
+extern int devices_init(void);
+extern int buses_init(void);
+extern int classes_init(void);
+extern int firmware_init(void);
+extern int platform_bus_init(void);
+extern int system_bus_init(void);
+extern int cpu_dev_init(void);
+extern int attribute_container_init(void);
+
extern int bus_add_device(struct device * dev);
extern void bus_remove_device(struct device * dev);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index ce23dc8..c3e5697 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -99,7 +99,8 @@
void class_put(struct class * cls)
{
- subsys_put(&cls->subsys);
+ if (cls)
+ subsys_put(&cls->subsys);
}
@@ -165,14 +166,25 @@
static void class_create_release(struct class *cls)
{
+ pr_debug("%s called for %s\n", __FUNCTION__, cls->name);
kfree(cls);
}
static void class_device_create_release(struct class_device *class_dev)
{
+ pr_debug("%s called for %s\n", __FUNCTION__, class_dev->class_id);
kfree(class_dev);
}
+/* needed to allow these devices to have parent class devices */
+static int class_device_create_hotplug(struct class_device *class_dev,
+ char **envp, int num_envp,
+ char *buffer, int buffer_size)
+{
+ pr_debug("%s called for %s\n", __FUNCTION__, class_dev->class_id);
+ return 0;
+}
+
/**
* class_create - create a struct class structure
* @owner: pointer to the module that is to "own" this struct class
@@ -301,10 +313,12 @@
kfree(cd->devt_attr);
cd->devt_attr = NULL;
- if (cls->release)
+ if (cd->release)
+ cd->release(cd);
+ else if (cls->release)
cls->release(cd);
else {
- printk(KERN_ERR "Device class '%s' does not have a release() function, "
+ printk(KERN_ERR "Class Device '%s' does not have a release() function, "
"it is broken and must be fixed.\n",
cd->class_id);
WARN_ON(1);
@@ -382,14 +396,18 @@
buffer = &buffer[length];
buffer_size -= length;
- if (class_dev->class->hotplug) {
- /* have the bus specific function add its stuff */
- retval = class_dev->class->hotplug (class_dev, envp, num_envp,
- buffer, buffer_size);
- if (retval) {
- pr_debug ("%s - hotplug() returned %d\n",
- __FUNCTION__, retval);
- }
+ if (class_dev->hotplug) {
+ /* have the class device specific function add its stuff */
+ retval = class_dev->hotplug(class_dev, envp, num_envp,
+ buffer, buffer_size);
+ if (retval)
+ pr_debug("class_dev->hotplug() returned %d\n", retval);
+ } else if (class_dev->class->hotplug) {
+ /* have the class specific function add its stuff */
+ retval = class_dev->class->hotplug(class_dev, envp, num_envp,
+ buffer, buffer_size);
+ if (retval)
+ pr_debug("class->hotplug() returned %d\n", retval);
}
return retval;
@@ -442,6 +460,13 @@
return print_dev_t(buf, class_dev->devt);
}
+static ssize_t store_uevent(struct class_device *class_dev,
+ const char *buf, size_t count)
+{
+ kobject_hotplug(&class_dev->kobj, KOBJ_ADD);
+ return count;
+}
+
void class_device_initialize(struct class_device *class_dev)
{
kobj_set_kset_s(class_dev, class_obj_subsys);
@@ -469,34 +494,45 @@
int class_device_add(struct class_device *class_dev)
{
- struct class * parent = NULL;
- struct class_interface * class_intf;
+ struct class *parent_class = NULL;
+ struct class_device *parent_class_dev = NULL;
+ struct class_interface *class_intf;
char *class_name = NULL;
- int error;
+ int error = -EINVAL;
class_dev = class_device_get(class_dev);
if (!class_dev)
return -EINVAL;
- if (!strlen(class_dev->class_id)) {
- error = -EINVAL;
+ if (!strlen(class_dev->class_id))
goto register_done;
- }
- parent = class_get(class_dev->class);
+ parent_class = class_get(class_dev->class);
+ if (!parent_class)
+ goto register_done;
+ parent_class_dev = class_device_get(class_dev->parent);
pr_debug("CLASS: registering class device: ID = '%s'\n",
class_dev->class_id);
/* first, register with generic layer. */
kobject_set_name(&class_dev->kobj, "%s", class_dev->class_id);
- if (parent)
- class_dev->kobj.parent = &parent->subsys.kset.kobj;
+ if (parent_class_dev)
+ class_dev->kobj.parent = &parent_class_dev->kobj;
+ else
+ class_dev->kobj.parent = &parent_class->subsys.kset.kobj;
- if ((error = kobject_add(&class_dev->kobj)))
+ error = kobject_add(&class_dev->kobj);
+ if (error)
goto register_done;
/* add the needed attributes to this device */
+ class_dev->uevent_attr.attr.name = "uevent";
+ class_dev->uevent_attr.attr.mode = S_IWUSR;
+ class_dev->uevent_attr.attr.owner = parent_class->owner;
+ class_dev->uevent_attr.store = store_uevent;
+ class_device_create_file(class_dev, &class_dev->uevent_attr);
+
if (MAJOR(class_dev->devt)) {
struct class_device_attribute *attr;
attr = kzalloc(sizeof(*attr), GFP_KERNEL);
@@ -505,12 +541,10 @@
kobject_del(&class_dev->kobj);
goto register_done;
}
-
attr->attr.name = "dev";
attr->attr.mode = S_IRUGO;
- attr->attr.owner = parent->owner;
+ attr->attr.owner = parent_class->owner;
attr->show = show_dev;
- attr->store = NULL;
class_device_create_file(class_dev, attr);
class_dev->devt_attr = attr;
}
@@ -524,20 +558,23 @@
class_name);
}
- /* notify any interfaces this device is now here */
- if (parent) {
- down(&parent->sem);
- list_add_tail(&class_dev->node, &parent->children);
- list_for_each_entry(class_intf, &parent->interfaces, node)
- if (class_intf->add)
- class_intf->add(class_dev);
- up(&parent->sem);
- }
kobject_hotplug(&class_dev->kobj, KOBJ_ADD);
+ /* notify any interfaces this device is now here */
+ if (parent_class) {
+ down(&parent_class->sem);
+ list_add_tail(&class_dev->node, &parent_class->children);
+ list_for_each_entry(class_intf, &parent_class->interfaces, node)
+ if (class_intf->add)
+ class_intf->add(class_dev, class_intf);
+ up(&parent_class->sem);
+ }
+
register_done:
- if (error && parent)
- class_put(parent);
+ if (error) {
+ class_put(parent_class);
+ class_device_put(parent_class_dev);
+ }
class_device_put(class_dev);
kfree(class_name);
return error;
@@ -552,21 +589,28 @@
/**
* class_device_create - creates a class device and registers it with sysfs
* @cs: pointer to the struct class that this device should be registered to.
+ * @parent: pointer to the parent struct class_device of this new device, if any.
* @dev: the dev_t for the char device to be added.
* @device: a pointer to a struct device that is assiociated with this class device.
* @fmt: string for the class device's name
*
* This function can be used by char device classes. A struct
* class_device will be created in sysfs, registered to the specified
- * class. A "dev" file will be created, showing the dev_t for the
- * device. The pointer to the struct class_device will be returned from
- * the call. Any further sysfs files that might be required can be
- * created using this pointer.
+ * class.
+ * A "dev" file will be created, showing the dev_t for the device, if
+ * the dev_t is not 0,0.
+ * If a pointer to a parent struct class_device is passed in, the newly
+ * created struct class_device will be a child of that device in sysfs.
+ * The pointer to the struct class_device will be returned from the
+ * call. Any further sysfs files that might be required can be created
+ * using this pointer.
*
* Note: the struct class passed to this function must have previously
* been created with a call to class_create().
*/
-struct class_device *class_device_create(struct class *cls, dev_t devt,
+struct class_device *class_device_create(struct class *cls,
+ struct class_device *parent,
+ dev_t devt,
struct device *device, char *fmt, ...)
{
va_list args;
@@ -585,6 +629,9 @@
class_dev->devt = devt;
class_dev->dev = device;
class_dev->class = cls;
+ class_dev->parent = parent;
+ class_dev->release = class_device_create_release;
+ class_dev->hotplug = class_device_create_hotplug;
va_start(args, fmt);
vsnprintf(class_dev->class_id, BUS_ID_SIZE, fmt, args);
@@ -602,17 +649,18 @@
void class_device_del(struct class_device *class_dev)
{
- struct class * parent = class_dev->class;
- struct class_interface * class_intf;
+ struct class *parent_class = class_dev->class;
+ struct class_device *parent_device = class_dev->parent;
+ struct class_interface *class_intf;
char *class_name = NULL;
- if (parent) {
- down(&parent->sem);
+ if (parent_class) {
+ down(&parent_class->sem);
list_del_init(&class_dev->node);
- list_for_each_entry(class_intf, &parent->interfaces, node)
+ list_for_each_entry(class_intf, &parent_class->interfaces, node)
if (class_intf->remove)
- class_intf->remove(class_dev);
- up(&parent->sem);
+ class_intf->remove(class_dev, class_intf);
+ up(&parent_class->sem);
}
if (class_dev->dev) {
@@ -620,6 +668,7 @@
sysfs_remove_link(&class_dev->kobj, "device");
sysfs_remove_link(&class_dev->dev->kobj, class_name);
}
+ class_device_remove_file(class_dev, &class_dev->uevent_attr);
if (class_dev->devt_attr)
class_device_remove_file(class_dev, class_dev->devt_attr);
class_device_remove_attrs(class_dev);
@@ -627,8 +676,8 @@
kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);
kobject_del(&class_dev->kobj);
- if (parent)
- class_put(parent);
+ class_device_put(parent_device);
+ class_put(parent_class);
kfree(class_name);
}
@@ -708,7 +757,8 @@
void class_device_put(struct class_device *class_dev)
{
- kobject_put(&class_dev->kobj);
+ if (class_dev)
+ kobject_put(&class_dev->kobj);
}
@@ -728,7 +778,7 @@
list_add_tail(&class_intf->node, &parent->interfaces);
if (class_intf->add) {
list_for_each_entry(class_dev, &parent->children, node)
- class_intf->add(class_dev);
+ class_intf->add(class_dev, class_intf);
}
up(&parent->sem);
@@ -747,7 +797,7 @@
list_del_init(&class_intf->node);
if (class_intf->remove) {
list_for_each_entry(class_dev, &parent->children, node)
- class_intf->remove(class_dev);
+ class_intf->remove(class_dev, class_intf);
}
up(&parent->sem);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 6ab73f5..8615b42 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -154,6 +154,13 @@
.hotplug = dev_hotplug,
};
+static ssize_t store_uevent(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ kobject_hotplug(&dev->kobj, KOBJ_ADD);
+ return count;
+}
+
/**
* device_subsys - structure to be registered with kobject core.
*/
@@ -225,6 +232,7 @@
klist_children_put);
INIT_LIST_HEAD(&dev->dma_pools);
init_MUTEX(&dev->sem);
+ device_init_wakeup(dev, 0);
}
/**
@@ -258,6 +266,14 @@
if ((error = kobject_add(&dev->kobj)))
goto Error;
+
+ dev->uevent_attr.attr.name = "uevent";
+ dev->uevent_attr.attr.mode = S_IWUSR;
+ if (dev->driver)
+ dev->uevent_attr.attr.owner = dev->driver->owner;
+ dev->uevent_attr.store = store_uevent;
+ device_create_file(dev, &dev->uevent_attr);
+
kobject_hotplug(&dev->kobj, KOBJ_ADD);
if ((error = device_pm_add(dev)))
goto PMError;
@@ -349,6 +365,7 @@
if (parent)
klist_del(&dev->knode_parent);
+ device_remove_file(dev, &dev->uevent_attr);
/* Notify the platform of the removal, in case they
* need to do anything...
@@ -390,11 +407,11 @@
/**
* device_for_each_child - device child iterator.
- * @dev: parent struct device.
+ * @parent: parent struct device.
* @data: data for the callback.
* @fn: function to be called for each device.
*
- * Iterate over @dev's child devices, and call @fn for each,
+ * Iterate over @parent's child devices, and call @fn for each,
* passing it @data.
*
* We check the return of @fn each time. If it returns anything
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index b79badd..081c927 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -9,6 +9,7 @@
#include <linux/topology.h>
#include <linux/device.h>
+#include "base.h"
struct sysdev_class cpu_sysdev_class = {
set_kset_name("cpu"),
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index ef3fe51..161f3a3 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -28,6 +28,7 @@
/**
* driver_for_each_device - Iterator for devices bound to a driver.
* @drv: Driver we're iterating.
+ * @start: Device to begin with
* @data: Data to pass to the callback.
* @fn: Function to call for each device.
*
@@ -57,7 +58,7 @@
/**
* driver_find_device - device iterator for locating a particular device.
- * @driver: The device's driver
+ * @drv: The device's driver
* @start: Device to begin with
* @data: Data to pass to match function
* @match: Callback function to check device
diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c
index 88ab044..cb1b98a 100644
--- a/drivers/base/firmware.c
+++ b/drivers/base/firmware.c
@@ -11,6 +11,9 @@
#include <linux/kobject.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/device.h>
+
+#include "base.h"
static decl_subsys(firmware, NULL, NULL);
diff --git a/drivers/base/init.c b/drivers/base/init.c
index a76ae5a..84e604e 100644
--- a/drivers/base/init.c
+++ b/drivers/base/init.c
@@ -10,14 +10,8 @@
#include <linux/device.h>
#include <linux/init.h>
-extern int devices_init(void);
-extern int buses_init(void);
-extern int classes_init(void);
-extern int firmware_init(void);
-extern int platform_bus_init(void);
-extern int system_bus_init(void);
-extern int cpu_dev_init(void);
-extern int attribute_container_init(void);
+#include "base.h"
+
/**
* driver_init - initialize driver model.
*
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 361e204..75ce871 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -17,6 +17,8 @@
#include <linux/bootmem.h>
#include <linux/err.h>
+#include "base.h"
+
struct device platform_bus = {
.bus_id = "platform",
};
@@ -279,13 +281,9 @@
{
int ret = 0;
- if (dev->driver && dev->driver->suspend) {
- ret = dev->driver->suspend(dev, state, SUSPEND_DISABLE);
- if (ret == 0)
- ret = dev->driver->suspend(dev, state, SUSPEND_SAVE_STATE);
- if (ret == 0)
- ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN);
- }
+ if (dev->driver && dev->driver->suspend)
+ ret = dev->driver->suspend(dev, state);
+
return ret;
}
@@ -293,13 +291,9 @@
{
int ret = 0;
- if (dev->driver && dev->driver->resume) {
- ret = dev->driver->resume(dev, RESUME_POWER_ON);
- if (ret == 0)
- ret = dev->driver->resume(dev, RESUME_RESTORE_STATE);
- if (ret == 0)
- ret = dev->driver->resume(dev, RESUME_ENABLE);
- }
+ if (dev->driver && dev->driver->resume)
+ ret = dev->driver->resume(dev);
+
return ret;
}
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index 8d04fb4..89c5787 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -48,8 +48,81 @@
static DEVICE_ATTR(state, 0644, state_show, state_store);
+/*
+ * wakeup - Report/change current wakeup option for device
+ *
+ * Some devices support "wakeup" events, which are hardware signals
+ * used to activate devices from suspended or low power states. Such
+ * devices have one of three values for the sysfs power/wakeup file:
+ *
+ * + "enabled\n" to issue the events;
+ * + "disabled\n" not to do so; or
+ * + "\n" for temporary or permanent inability to issue wakeup.
+ *
+ * (For example, unconfigured USB devices can't issue wakeups.)
+ *
+ * Familiar examples of devices that can issue wakeup events include
+ * keyboards and mice (both PS2 and USB styles), power buttons, modems,
+ * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events
+ * will wake the entire system from a suspend state; others may just
+ * wake up the device (if the system as a whole is already active).
+ * Some wakeup events use normal IRQ lines; other use special out
+ * of band signaling.
+ *
+ * It is the responsibility of device drivers to enable (or disable)
+ * wakeup signaling as part of changing device power states, respecting
+ * the policy choices provided through the driver model.
+ *
+ * Devices may not be able to generate wakeup events from all power
+ * states. Also, the events may be ignored in some configurations;
+ * for example, they might need help from other devices that aren't
+ * active, or which may have wakeup disabled. Some drivers rely on
+ * wakeup events internally (unless they are disabled), keeping
+ * their hardware in low power modes whenever they're unused. This
+ * saves runtime power, without requiring system-wide sleep states.
+ */
+
+static const char enabled[] = "enabled";
+static const char disabled[] = "disabled";
+
+static ssize_t
+wake_show(struct device * dev, struct device_attribute *attr, char * buf)
+{
+ return sprintf(buf, "%s\n", device_can_wakeup(dev)
+ ? (device_may_wakeup(dev) ? enabled : disabled)
+ : "");
+}
+
+static ssize_t
+wake_store(struct device * dev, struct device_attribute *attr,
+ const char * buf, size_t n)
+{
+ char *cp;
+ int len = n;
+
+ if (!device_can_wakeup(dev))
+ return -EINVAL;
+
+ cp = memchr(buf, '\n', n);
+ if (cp)
+ len = cp - buf;
+ if (len == sizeof enabled - 1
+ && strncmp(buf, enabled, sizeof enabled - 1) == 0)
+ device_set_wakeup_enable(dev, 1);
+ else if (len == sizeof disabled - 1
+ && strncmp(buf, disabled, sizeof disabled - 1) == 0)
+ device_set_wakeup_enable(dev, 0);
+ else
+ return -EINVAL;
+ return n;
+}
+
+static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
+
+
static struct attribute * power_attrs[] = {
&dev_attr_state.attr,
+ &dev_attr_wakeup.attr,
NULL,
};
static struct attribute_group pm_attr_group = {
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
index 0e9e586..881c48d 100644
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -1,5 +1,5 @@
/* Copyright (c) 2004 Coraid, Inc. See COPYING for GPL terms. */
-#define VERSION "12"
+#define VERSION "14"
#define AOE_MAJOR 152
#define DEVICE_NAME "aoe"
diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index 45a2430..41ae0ed 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -224,7 +224,7 @@
return PTR_ERR(aoe_class);
}
for (i = 0; i < ARRAY_SIZE(chardevs); ++i)
- class_device_create(aoe_class,
+ class_device_create(aoe_class, NULL,
MKDEV(AOE_MAJOR, chardevs[i].minor),
NULL, chardevs[i].name);
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index b5be4b7..5c9c7c1 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -8,6 +8,7 @@
#include <linux/blkdev.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
+#include <asm/unaligned.h>
#include "aoe.h"
#define TIMERTICK (HZ / 10)
@@ -311,16 +312,16 @@
u16 n;
/* word 83: command set supported */
- n = le16_to_cpup((__le16 *) &id[83<<1]);
+ n = le16_to_cpu(get_unaligned((__le16 *) &id[83<<1]));
/* word 86: command set/feature enabled */
- n |= le16_to_cpup((__le16 *) &id[86<<1]);
+ n |= le16_to_cpu(get_unaligned((__le16 *) &id[86<<1]));
if (n & (1<<10)) { /* bit 10: LBA 48 */
d->flags |= DEVFL_EXT;
/* word 100: number lba48 sectors */
- ssize = le64_to_cpup((__le64 *) &id[100<<1]);
+ ssize = le64_to_cpu(get_unaligned((__le64 *) &id[100<<1]));
/* set as in ide-disk.c:init_idedisk_capacity */
d->geo.cylinders = ssize;
@@ -331,12 +332,12 @@
d->flags &= ~DEVFL_EXT;
/* number lba28 sectors */
- ssize = le32_to_cpup((__le32 *) &id[60<<1]);
+ ssize = le32_to_cpu(get_unaligned((__le32 *) &id[60<<1]));
/* NOTE: obsolete in ATA 6 */
- d->geo.cylinders = le16_to_cpup((__le16 *) &id[54<<1]);
- d->geo.heads = le16_to_cpup((__le16 *) &id[55<<1]);
- d->geo.sectors = le16_to_cpup((__le16 *) &id[56<<1]);
+ d->geo.cylinders = le16_to_cpu(get_unaligned((__le16 *) &id[54<<1]));
+ d->geo.heads = le16_to_cpu(get_unaligned((__le16 *) &id[55<<1]));
+ d->geo.sectors = le16_to_cpu(get_unaligned((__le16 *) &id[56<<1]));
}
d->ssize = ssize;
d->geo.start = 0;
diff --git a/drivers/block/genhd.c b/drivers/block/genhd.c
index d42840c..486ce1f 100644
--- a/drivers/block/genhd.c
+++ b/drivers/block/genhd.c
@@ -337,10 +337,30 @@
return ret;
}
+static ssize_t disk_attr_store(struct kobject * kobj, struct attribute * attr,
+ const char *page, size_t count)
+{
+ struct gendisk *disk = to_disk(kobj);
+ struct disk_attribute *disk_attr =
+ container_of(attr,struct disk_attribute,attr);
+ ssize_t ret = 0;
+
+ if (disk_attr->store)
+ ret = disk_attr->store(disk, page, count);
+ return ret;
+}
+
static struct sysfs_ops disk_sysfs_ops = {
.show = &disk_attr_show,
+ .store = &disk_attr_store,
};
+static ssize_t disk_uevent_store(struct gendisk * disk,
+ const char *buf, size_t count)
+{
+ kobject_hotplug(&disk->kobj, KOBJ_ADD);
+ return count;
+}
static ssize_t disk_dev_read(struct gendisk * disk, char *page)
{
dev_t base = MKDEV(disk->major, disk->first_minor);
@@ -382,6 +402,10 @@
jiffies_to_msecs(disk_stat_read(disk, io_ticks)),
jiffies_to_msecs(disk_stat_read(disk, time_in_queue)));
}
+static struct disk_attribute disk_attr_uevent = {
+ .attr = {.name = "uevent", .mode = S_IWUSR },
+ .store = disk_uevent_store
+};
static struct disk_attribute disk_attr_dev = {
.attr = {.name = "dev", .mode = S_IRUGO },
.show = disk_dev_read
@@ -404,6 +428,7 @@
};
static struct attribute * default_attrs[] = {
+ &disk_attr_uevent.attr,
&disk_attr_dev.attr,
&disk_attr_range.attr,
&disk_attr_removable.attr,
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
index b398239..82f2d6d 100644
--- a/drivers/block/paride/pg.c
+++ b/drivers/block/paride/pg.c
@@ -674,7 +674,7 @@
for (unit = 0; unit < PG_UNITS; unit++) {
struct pg *dev = &devices[unit];
if (dev->present) {
- class_device_create(pg_class, MKDEV(major, unit),
+ class_device_create(pg_class, NULL, MKDEV(major, unit),
NULL, "pg%u", unit);
err = devfs_mk_cdev(MKDEV(major, unit),
S_IFCHR | S_IRUSR | S_IWUSR, "pg/%u",
diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
index d8d3523..686c955 100644
--- a/drivers/block/paride/pt.c
+++ b/drivers/block/paride/pt.c
@@ -971,7 +971,7 @@
devfs_mk_dir("pt");
for (unit = 0; unit < PT_UNITS; unit++)
if (pt[unit].present) {
- class_device_create(pt_class, MKDEV(major, unit),
+ class_device_create(pt_class, NULL, MKDEV(major, unit),
NULL, "pt%d", unit);
err = devfs_mk_cdev(MKDEV(major, unit),
S_IFCHR | S_IRUSR | S_IWUSR,
@@ -980,7 +980,7 @@
class_device_destroy(pt_class, MKDEV(major, unit));
goto out_class;
}
- class_device_create(pt_class, MKDEV(major, unit + 128),
+ class_device_create(pt_class, NULL, MKDEV(major, unit + 128),
NULL, "pt%dn", unit);
err = devfs_mk_cdev(MKDEV(major, unit + 128),
S_IFCHR | S_IRUSR | S_IWUSR,
diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index d57007b9..1ded3b4 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -1,7 +1,7 @@
/*
* sx8.c: Driver for Promise SATA SX8 looks-like-I2O hardware
*
- * Copyright 2004 Red Hat, Inc.
+ * Copyright 2004-2005 Red Hat, Inc.
*
* Author/maintainer: Jeff Garzik <jgarzik@pobox.com>
*
@@ -31,10 +31,6 @@
#include <asm/semaphore.h>
#include <asm/uaccess.h>
-MODULE_AUTHOR("Jeff Garzik");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Promise SATA SX8 block driver");
-
#if 0
#define CARM_DEBUG
#define CARM_VERBOSE_DEBUG
@@ -45,9 +41,35 @@
#undef CARM_NDEBUG
#define DRV_NAME "sx8"
-#define DRV_VERSION "0.8"
+#define DRV_VERSION "1.0"
#define PFX DRV_NAME ": "
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Promise SATA SX8 block driver");
+MODULE_VERSION(DRV_VERSION);
+
+/*
+ * SX8 hardware has a single message queue for all ATA ports.
+ * When this driver was written, the hardware (firmware?) would
+ * corrupt data eventually, if more than one request was outstanding.
+ * As one can imagine, having 8 ports bottlenecking on a single
+ * command hurts performance.
+ *
+ * Based on user reports, later versions of the hardware (firmware?)
+ * seem to be able to survive with more than one command queued.
+ *
+ * Therefore, we default to the safe option -- 1 command -- but
+ * allow the user to increase this.
+ *
+ * SX8 should be able to support up to ~60 queued commands (CARM_MAX_REQ),
+ * but problems seem to occur when you exceed ~30, even on newer hardware.
+ */
+static int max_queue = 1;
+module_param(max_queue, int, 0444);
+MODULE_PARM_DESC(max_queue, "Maximum number of queued commands. (min==1, max==30, safe==1)");
+
+
#define NEXT_RESP(idx) ((idx + 1) % RMSG_Q_LEN)
/* 0xf is just arbitrary, non-zero noise; this is sorta like poisoning */
@@ -90,12 +112,10 @@
/* command message queue limits */
CARM_MAX_REQ = 64, /* max command msgs per host */
- CARM_MAX_Q = 1, /* one command at a time */
CARM_MSG_LOW_WATER = (CARM_MAX_REQ / 4), /* refill mark */
/* S/G limits, host-wide and per-request */
CARM_MAX_REQ_SG = 32, /* max s/g entries per request */
- CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */
CARM_MAX_HOST_SG = 600, /* max s/g entries per host */
CARM_SG_LOW_WATER = (CARM_MAX_HOST_SG / 4), /* re-fill mark */
@@ -181,6 +201,10 @@
FL_DYN_MAJOR = (1 << 17),
};
+enum {
+ CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */
+};
+
enum scatter_gather_types {
SGT_32BIT = 0,
SGT_64BIT = 1,
@@ -218,7 +242,6 @@
struct carm_port {
unsigned int port_no;
- unsigned int n_queued;
struct gendisk *disk;
struct carm_host *host;
@@ -448,7 +471,7 @@
for (i = 0; i < ARRAY_SIZE(msg_sizes); i++)
if (msg_size <= msg_sizes[i])
return i;
-
+
return -ENOENT;
}
@@ -509,7 +532,7 @@
if (host->hw_sg_used >= (CARM_MAX_HOST_SG - CARM_MAX_REQ_SG))
return NULL;
- for (i = 0; i < CARM_MAX_Q; i++)
+ for (i = 0; i < max_queue; i++)
if ((host->msg_alloc & (1ULL << i)) == 0) {
struct carm_request *crq = &host->req[i];
crq->port = NULL;
@@ -521,14 +544,14 @@
assert(host->n_msgs <= CARM_MAX_REQ);
return crq;
}
-
+
DPRINTK("no request available, returning NULL\n");
return NULL;
}
static int carm_put_request(struct carm_host *host, struct carm_request *crq)
{
- assert(crq->tag < CARM_MAX_Q);
+ assert(crq->tag < max_queue);
if (unlikely((host->msg_alloc & (1ULL << crq->tag)) == 0))
return -EINVAL; /* tried to clear a tag that was not active */
@@ -791,7 +814,7 @@
int is_ok)
{
carm_end_request_queued(host, crq, is_ok);
- if (CARM_MAX_Q == 1)
+ if (max_queue == 1)
carm_round_robin(host);
else if ((host->n_msgs <= CARM_MSG_LOW_WATER) &&
(host->hw_sg_used <= CARM_SG_LOW_WATER)) {
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 543f93e..b9fbe6e 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -55,14 +55,6 @@
Say Y here to compile support for HCI BCSP protocol.
-config BT_HCIUART_BCSP_TXCRC
- bool "Transmit CRC with every BCSP packet"
- depends on BT_HCIUART_BCSP
- help
- If you say Y here, a 16-bit CRC checksum will be transmitted along with
- every BCSP (BlueCore Serial Protocol) packet sent to the Bluetooth chip.
- This increases reliability, but slightly reduces efficiency.
-
config BT_HCIBCM203X
tristate "HCI BCM203x USB driver"
depends on USB
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
index 4fa8523..0db0400 100644
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -550,6 +550,9 @@
if (ignore)
return -ENODEV;
+ if (intf->cur_altsetting->desc.bInterfaceNumber > 0)
+ return -ENODEV;
+
data = kmalloc(sizeof(*data), GFP_KERNEL);
if (!data) {
BT_ERR("Can't allocate data structure");
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 0ee324e..0a47614 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -1,35 +1,27 @@
-/*
- BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ).
- Copyright 2002 by Fabrizio Gennari <fabrizio.gennari@philips.com>
-
- Based on
- hci_h4.c by Maxim Krasnyansky <maxk@qualcomm.com>
- ABCSP by Carl Orsborn <cjo@csr.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
/*
- * $Id: hci_bcsp.c,v 1.2 2002/09/26 05:05:14 maxk Exp $
+ *
+ * Bluetooth HCI UART driver
+ *
+ * Copyright (C) 2002-2003 Fabrizio Gennari <fabrizio.gennari@philips.com>
+ * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
*/
-#define VERSION "0.2"
-
#include <linux/config.h>
#include <linux/module.h>
@@ -52,16 +44,56 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
+
#include "hci_uart.h"
-#include "hci_bcsp.h"
#ifndef CONFIG_BT_HCIUART_DEBUG
#undef BT_DBG
#define BT_DBG( A... )
#endif
+#define VERSION "0.3"
+
+static int txcrc = 1;
static int hciextn = 1;
+#define BCSP_TXWINSIZE 4
+
+#define BCSP_ACK_PKT 0x05
+#define BCSP_LE_PKT 0x06
+
+struct bcsp_struct {
+ struct sk_buff_head unack; /* Unack'ed packets queue */
+ struct sk_buff_head rel; /* Reliable packets queue */
+ struct sk_buff_head unrel; /* Unreliable packets queue */
+
+ unsigned long rx_count;
+ struct sk_buff *rx_skb;
+ u8 rxseq_txack; /* rxseq == txack. */
+ u8 rxack; /* Last packet sent by us that the peer ack'ed */
+ struct timer_list tbcsp;
+
+ enum {
+ BCSP_W4_PKT_DELIMITER,
+ BCSP_W4_PKT_START,
+ BCSP_W4_BCSP_HDR,
+ BCSP_W4_DATA,
+ BCSP_W4_CRC
+ } rx_state;
+
+ enum {
+ BCSP_ESCSTATE_NOESC,
+ BCSP_ESCSTATE_ESC
+ } rx_esc_state;
+
+ u8 use_crc;
+ u16 message_crc;
+ u8 txack_req; /* Do we need to send ack's to the peer? */
+
+ /* Reliable packet sequence number - used to assign seq to each rel pkt. */
+ u8 msgq_txseq;
+};
+
/* ---- BCSP CRC calculation ---- */
/* Table for calculating CRC for polynomial 0x1021, LSB processed first,
@@ -111,6 +143,7 @@
rev |= (crc & 1);
crc = crc >> 1;
}
+
return (rev);
}
@@ -119,6 +152,7 @@
static void bcsp_slip_msgdelim(struct sk_buff *skb)
{
const char pkt_delim = 0xc0;
+
memcpy(skb_put(skb, 1), &pkt_delim, 1);
}
@@ -173,11 +207,8 @@
{
struct sk_buff *nskb;
u8 hdr[4], chan;
- int rel, i;
-
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
u16 BCSP_CRC_INIT(bcsp_txmsg_crc);
-#endif
+ int rel, i;
switch (pkt_type) {
case HCI_ACLDATA_PKT:
@@ -240,9 +271,9 @@
BT_DBG("Sending packet with seqno %u", bcsp->msgq_txseq);
bcsp->msgq_txseq = ++(bcsp->msgq_txseq) & 0x07;
}
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- hdr[0] |= 0x40;
-#endif
+
+ if (bcsp->use_crc)
+ hdr[0] |= 0x40;
hdr[1] = ((len << 4) & 0xff) | chan;
hdr[2] = len >> 4;
@@ -251,25 +282,25 @@
/* Put BCSP header */
for (i = 0; i < 4; i++) {
bcsp_slip_one_byte(nskb, hdr[i]);
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]);
-#endif
+
+ if (bcsp->use_crc)
+ bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]);
}
/* Put payload */
for (i = 0; i < len; i++) {
bcsp_slip_one_byte(nskb, data[i]);
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- bcsp_crc_update(&bcsp_txmsg_crc, data[i]);
-#endif
+
+ if (bcsp->use_crc)
+ bcsp_crc_update(&bcsp_txmsg_crc, data[i]);
}
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
/* Put CRC */
- bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc);
- bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff));
- bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff));
-#endif
+ if (bcsp->use_crc) {
+ bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc);
+ bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff));
+ bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff));
+ }
bcsp_slip_msgdelim(nskb);
return nskb;
@@ -317,7 +348,6 @@
spin_unlock_irqrestore(&bcsp->unack.lock, flags);
-
/* We could not send a reliable packet, either because there are
none or because there are too many unack'ed pkts. Did we receive
any packets we have not acknowledged yet ? */
@@ -363,7 +393,7 @@
BT_ERR("Peer acked invalid packet");
BT_DBG("Removing %u pkts out of %u, up to seqno %u",
- pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07);
+ pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07);
for (i = 0, skb = ((struct sk_buff *) &bcsp->unack)->next; i < pkts_to_be_removed
&& skb != (struct sk_buff *) &bcsp->unack; i++) {
@@ -374,8 +404,10 @@
kfree_skb(skb);
skb = nskb;
}
+
if (bcsp->unack.qlen == 0)
del_timer(&bcsp->tbcsp);
+
spin_unlock_irqrestore(&bcsp->unack.lock, flags);
if (i != pkts_to_be_removed)
@@ -530,6 +562,7 @@
hci_recv_frame(bcsp->rx_skb);
}
+
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
bcsp->rx_skb = NULL;
}
@@ -598,8 +631,8 @@
BT_ERR ("Checksum failed: computed %04x received %04x",
bcsp_crc_reverse(bcsp->message_crc),
- (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) +
- bcsp->rx_skb->data[bcsp->rx_skb->len - 1]);
+ (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) +
+ bcsp->rx_skb->data[bcsp->rx_skb->len - 1]);
kfree_skb(bcsp->rx_skb);
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
@@ -633,7 +666,7 @@
bcsp->rx_count = 4;
bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
BCSP_CRC_INIT(bcsp->message_crc);
-
+
/* Do not increment ptr or decrement count
* Allocate packet. Max len of a BCSP pkt=
* 0xFFF (payload) +4 (header) +2 (crc) */
@@ -698,6 +731,9 @@
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
+ if (txcrc)
+ bcsp->use_crc = 1;
+
return 0;
}
@@ -718,18 +754,19 @@
}
static struct hci_uart_proto bcsp = {
- .id = HCI_UART_BCSP,
- .open = bcsp_open,
- .close = bcsp_close,
- .enqueue = bcsp_enqueue,
- .dequeue = bcsp_dequeue,
- .recv = bcsp_recv,
- .flush = bcsp_flush
+ .id = HCI_UART_BCSP,
+ .open = bcsp_open,
+ .close = bcsp_close,
+ .enqueue = bcsp_enqueue,
+ .dequeue = bcsp_dequeue,
+ .recv = bcsp_recv,
+ .flush = bcsp_flush
};
int bcsp_init(void)
{
int err = hci_uart_register_proto(&bcsp);
+
if (!err)
BT_INFO("HCI BCSP protocol initialized");
else
@@ -743,5 +780,8 @@
return hci_uart_unregister_proto(&bcsp);
}
+module_param(txcrc, bool, 0644);
+MODULE_PARM_DESC(txcrc, "Transmit CRC with every BCSP packet");
+
module_param(hciextn, bool, 0644);
MODULE_PARM_DESC(hciextn, "Convert HCI Extensions into BCSP packets");
diff --git a/drivers/bluetooth/hci_bcsp.h b/drivers/bluetooth/hci_bcsp.h
deleted file mode 100644
index a2b3bb9..0000000
--- a/drivers/bluetooth/hci_bcsp.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ).
- Copyright 2002 by Fabrizio Gennari <fabrizio.gennari@philips.com>
-
- Based on
- hci_h4.c by Maxim Krasnyansky <maxk@qualcomm.com>
- ABCSP by Carl Orsborn <cjo@csr.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
-/*
- * $Id: hci_bcsp.h,v 1.2 2002/09/26 05:05:14 maxk Exp $
- */
-
-#ifndef __HCI_BCSP_H__
-#define __HCI_BCSP_H__
-
-#define BCSP_TXWINSIZE 4
-
-#define BCSP_ACK_PKT 0x05
-#define BCSP_LE_PKT 0x06
-
-struct bcsp_struct {
- struct sk_buff_head unack; /* Unack'ed packets queue */
- struct sk_buff_head rel; /* Reliable packets queue */
- struct sk_buff_head unrel; /* Unreliable packets queue */
-
- unsigned long rx_count;
- struct sk_buff *rx_skb;
- u8 rxseq_txack; /* rxseq == txack. */
- u8 rxack; /* Last packet sent by us that the peer ack'ed */
- struct timer_list tbcsp;
-
- enum {
- BCSP_W4_PKT_DELIMITER,
- BCSP_W4_PKT_START,
- BCSP_W4_BCSP_HDR,
- BCSP_W4_DATA,
- BCSP_W4_CRC
- } rx_state;
-
- enum {
- BCSP_ESCSTATE_NOESC,
- BCSP_ESCSTATE_ESC
- } rx_esc_state;
-
- u16 message_crc;
- u8 txack_req; /* Do we need to send ack's to the peer? */
-
- /* Reliable packet sequence number - used to assign seq to each rel pkt. */
- u8 msgq_txseq;
-};
-
-#endif /* __HCI_BCSP_H__ */
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index cf8a22d..12e369a 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -1,33 +1,27 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2000-2001 Qualcomm Incorporated
-
- Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
/*
- * Bluetooth HCI UART(H4) protocol.
*
- * $Id: hci_h4.c,v 1.3 2002/09/09 01:17:32 maxk Exp $
+ * Bluetooth HCI UART driver
+ *
+ * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
*/
-#define VERSION "1.2"
#include <linux/config.h>
#include <linux/module.h>
@@ -51,24 +45,41 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
+
#include "hci_uart.h"
-#include "hci_h4.h"
#ifndef CONFIG_BT_HCIUART_DEBUG
#undef BT_DBG
#define BT_DBG( A... )
#endif
+#define VERSION "1.2"
+
+struct h4_struct {
+ unsigned long rx_state;
+ unsigned long rx_count;
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+};
+
+/* H4 receiver States */
+#define H4_W4_PACKET_TYPE 0
+#define H4_W4_EVENT_HDR 1
+#define H4_W4_ACL_HDR 2
+#define H4_W4_SCO_HDR 3
+#define H4_W4_DATA 4
+
/* Initialize protocol */
static int h4_open(struct hci_uart *hu)
{
struct h4_struct *h4;
-
+
BT_DBG("hu %p", hu);
-
+
h4 = kmalloc(sizeof(*h4), GFP_ATOMIC);
if (!h4)
return -ENOMEM;
+
memset(h4, 0, sizeof(*h4));
skb_queue_head_init(&h4->txq);
@@ -83,7 +94,9 @@
struct h4_struct *h4 = hu->priv;
BT_DBG("hu %p", hu);
+
skb_queue_purge(&h4->txq);
+
return 0;
}
@@ -91,16 +104,19 @@
static int h4_close(struct hci_uart *hu)
{
struct h4_struct *h4 = hu->priv;
+
hu->priv = NULL;
BT_DBG("hu %p", hu);
skb_queue_purge(&h4->txq);
+
if (h4->rx_skb)
kfree_skb(h4->rx_skb);
hu->priv = NULL;
kfree(h4);
+
return 0;
}
@@ -114,6 +130,7 @@
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
skb_queue_tail(&h4->txq, skb);
+
return 0;
}
@@ -122,6 +139,7 @@
register int room = skb_tailroom(h4->rx_skb);
BT_DBG("len %d room %d", len, room);
+
if (!len) {
hci_recv_frame(h4->rx_skb);
} else if (len > room) {
@@ -136,6 +154,7 @@
h4->rx_state = H4_W4_PACKET_TYPE;
h4->rx_skb = NULL;
h4->rx_count = 0;
+
return 0;
}
@@ -228,6 +247,7 @@
ptr++; count--;
continue;
};
+
ptr++; count--;
/* Allocate packet */
@@ -238,9 +258,11 @@
h4->rx_count = 0;
return 0;
}
+
h4->rx_skb->dev = (void *) hu->hdev;
bt_cb(h4->rx_skb)->pkt_type = type;
}
+
return count;
}
@@ -251,23 +273,24 @@
}
static struct hci_uart_proto h4p = {
- .id = HCI_UART_H4,
- .open = h4_open,
- .close = h4_close,
- .recv = h4_recv,
- .enqueue = h4_enqueue,
- .dequeue = h4_dequeue,
- .flush = h4_flush,
+ .id = HCI_UART_H4,
+ .open = h4_open,
+ .close = h4_close,
+ .recv = h4_recv,
+ .enqueue = h4_enqueue,
+ .dequeue = h4_dequeue,
+ .flush = h4_flush,
};
-
+
int h4_init(void)
{
int err = hci_uart_register_proto(&h4p);
+
if (!err)
BT_INFO("HCI H4 protocol initialized");
else
BT_ERR("HCI H4 protocol registration failed");
-
+
return err;
}
diff --git a/drivers/bluetooth/hci_h4.h b/drivers/bluetooth/hci_h4.h
deleted file mode 100644
index b95ff54..0000000
--- a/drivers/bluetooth/hci_h4.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2000-2001 Qualcomm Incorporated
-
- Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
-/*
- * $Id: hci_h4.h,v 1.2 2002/09/09 01:17:32 maxk Exp $
- */
-
-#ifdef __KERNEL__
-struct h4_struct {
- unsigned long rx_state;
- unsigned long rx_count;
- struct sk_buff *rx_skb;
- struct sk_buff_head txq;
-};
-
-/* H4 receiver States */
-#define H4_W4_PACKET_TYPE 0
-#define H4_W4_EVENT_HDR 1
-#define H4_W4_ACL_HDR 2
-#define H4_W4_SCO_HDR 3
-#define H4_W4_DATA 4
-
-#endif /* __KERNEL__ */
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index aed80cc..4a775f6 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -1,33 +1,27 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2000-2001 Qualcomm Incorporated
-
- Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
/*
- * Bluetooth HCI UART driver.
*
- * $Id: hci_ldisc.c,v 1.5 2002/10/02 18:37:20 maxk Exp $
+ * Bluetooth HCI UART driver
+ *
+ * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
*/
-#define VERSION "2.1"
#include <linux/config.h>
#include <linux/module.h>
@@ -59,6 +53,8 @@
#define BT_DBG( A... )
#endif
+#define VERSION "2.2"
+
static int reset = 0;
static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
@@ -72,6 +68,7 @@
return -EEXIST;
hup[p->id] = p;
+
return 0;
}
@@ -84,6 +81,7 @@
return -EINVAL;
hup[p->id] = NULL;
+
return 0;
}
@@ -91,13 +89,14 @@
{
if (id >= HCI_UART_MAX_PROTO)
return NULL;
+
return hup[id];
}
static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type)
{
struct hci_dev *hdev = hu->hdev;
-
+
/* Update HCI stat counters */
switch (pkt_type) {
case HCI_COMMAND_PKT:
@@ -117,10 +116,12 @@
static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
{
struct sk_buff *skb = hu->tx_skb;
+
if (!skb)
skb = hu->proto->dequeue(hu);
else
hu->tx_skb = NULL;
+
return skb;
}
@@ -129,7 +130,7 @@
struct tty_struct *tty = hu->tty;
struct hci_dev *hdev = hu->hdev;
struct sk_buff *skb;
-
+
if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
return 0;
@@ -142,7 +143,7 @@
while ((skb = hci_uart_dequeue(hu))) {
int len;
-
+
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
len = tty->driver->write(tty, skb->data, skb->len);
hdev->stat.byte_tx += len;
@@ -152,11 +153,11 @@
hu->tx_skb = skb;
break;
}
-
+
hci_uart_tx_complete(hu, bt_cb(skb)->pkt_type);
kfree_skb(skb);
- }
-
+ }
+
if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state))
goto restart;
@@ -173,6 +174,7 @@
/* Nothing to do for UART driver */
set_bit(HCI_RUNNING, &hdev->flags);
+
return 0;
}
@@ -234,6 +236,7 @@
hu->proto->enqueue(hu, skb);
hci_uart_tx_wakeup(hu);
+
return 0;
}
@@ -241,7 +244,8 @@
{
struct hci_uart *hu;
- if (!hdev) return;
+ if (!hdev)
+ return;
BT_DBG("%s", hdev->name);
@@ -272,6 +276,7 @@
BT_ERR("Can't allocate controll structure");
return -ENFILE;
}
+
memset(hu, 0, sizeof(struct hci_uart));
tty->disc_data = hu;
@@ -280,8 +285,10 @@
spin_lock_init(&hu->rx_lock);
/* Flush any pending characters in the driver and line discipline. */
+
/* FIXME: why is this needed. Note don't use ldisc_ref here as the
open path is before the ldisc is referencable */
+
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer(tty);
@@ -372,13 +379,13 @@
static void hci_uart_tty_receive(struct tty_struct *tty, const __u8 *data, char *flags, int count)
{
struct hci_uart *hu = (void *)tty->disc_data;
-
+
if (!hu || tty != hu->tty)
return;
if (!test_bit(HCI_UART_PROTO_SET, &hu->flags))
return;
-
+
spin_lock(&hu->rx_lock);
hu->proto->recv(hu, (void *) data, count);
hu->hdev->stat.byte_rx += count;
@@ -429,8 +436,8 @@
static int hci_uart_set_proto(struct hci_uart *hu, int id)
{
struct hci_uart_proto *p;
- int err;
-
+ int err;
+
p = hci_uart_get_proto(id);
if (!p)
return -EPROTONOSUPPORT;
@@ -446,6 +453,7 @@
p->close(hu);
return err;
}
+
return 0;
}
@@ -463,7 +471,7 @@
* Return Value: Command dependent
*/
static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
+ unsigned int cmd, unsigned long arg)
{
struct hci_uart *hu = (void *)tty->disc_data;
int err = 0;
@@ -483,14 +491,14 @@
return err;
}
tty->low_latency = 1;
- } else
+ } else
return -EBUSY;
case HCIUARTGETPROTO:
if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
return hu->proto->id;
return -EUNATCH;
-
+
default:
err = n_tty_ioctl(tty, file, cmd, arg);
break;
@@ -502,27 +510,23 @@
/*
* We don't provide read/write/poll interface for user space.
*/
-static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file, unsigned char __user *buf, size_t nr)
-{
- return 0;
-}
-static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file, const unsigned char *data, size_t count)
-{
- return 0;
-}
-static unsigned int hci_uart_tty_poll(struct tty_struct *tty, struct file *filp, poll_table *wait)
+static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file,
+ unsigned char __user *buf, size_t nr)
{
return 0;
}
-#ifdef CONFIG_BT_HCIUART_H4
-int h4_init(void);
-int h4_deinit(void);
-#endif
-#ifdef CONFIG_BT_HCIUART_BCSP
-int bcsp_init(void);
-int bcsp_deinit(void);
-#endif
+static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file,
+ const unsigned char *data, size_t count)
+{
+ return 0;
+}
+
+static unsigned int hci_uart_tty_poll(struct tty_struct *tty,
+ struct file *filp, poll_table *wait)
+{
+ return 0;
+}
static int __init hci_uart_init(void)
{
@@ -534,18 +538,18 @@
/* Register the tty discipline */
memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc));
- hci_uart_ldisc.magic = TTY_LDISC_MAGIC;
- hci_uart_ldisc.name = "n_hci";
- hci_uart_ldisc.open = hci_uart_tty_open;
- hci_uart_ldisc.close = hci_uart_tty_close;
- hci_uart_ldisc.read = hci_uart_tty_read;
- hci_uart_ldisc.write = hci_uart_tty_write;
- hci_uart_ldisc.ioctl = hci_uart_tty_ioctl;
- hci_uart_ldisc.poll = hci_uart_tty_poll;
- hci_uart_ldisc.receive_room= hci_uart_tty_room;
- hci_uart_ldisc.receive_buf = hci_uart_tty_receive;
- hci_uart_ldisc.write_wakeup= hci_uart_tty_wakeup;
- hci_uart_ldisc.owner = THIS_MODULE;
+ hci_uart_ldisc.magic = TTY_LDISC_MAGIC;
+ hci_uart_ldisc.name = "n_hci";
+ hci_uart_ldisc.open = hci_uart_tty_open;
+ hci_uart_ldisc.close = hci_uart_tty_close;
+ hci_uart_ldisc.read = hci_uart_tty_read;
+ hci_uart_ldisc.write = hci_uart_tty_write;
+ hci_uart_ldisc.ioctl = hci_uart_tty_ioctl;
+ hci_uart_ldisc.poll = hci_uart_tty_poll;
+ hci_uart_ldisc.receive_room = hci_uart_tty_room;
+ hci_uart_ldisc.receive_buf = hci_uart_tty_receive;
+ hci_uart_ldisc.write_wakeup = hci_uart_tty_wakeup;
+ hci_uart_ldisc.owner = THIS_MODULE;
if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) {
BT_ERR("HCI line discipline registration failed. (%d)", err);
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 0a57d727..b250e67 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -1,32 +1,29 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2000-2001 Qualcomm Incorporated
-
- Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
/*
- * $Id: hci_uart.h,v 1.2 2002/09/09 01:17:32 maxk Exp $
+ *
+ * Bluetooth HCI UART driver
+ *
+ * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
*/
-#ifndef N_HCI
+#ifndef N_HCI
#define N_HCI 15
#endif
@@ -42,7 +39,6 @@
#define HCI_UART_3WIRE 2
#define HCI_UART_H4DS 3
-#ifdef __KERNEL__
struct hci_uart;
struct hci_uart_proto {
@@ -56,27 +52,35 @@
};
struct hci_uart {
- struct tty_struct *tty;
- struct hci_dev *hdev;
- unsigned long flags;
+ struct tty_struct *tty;
+ struct hci_dev *hdev;
+ unsigned long flags;
- struct hci_uart_proto *proto;
- void *priv;
-
- struct sk_buff *tx_skb;
- unsigned long tx_state;
- spinlock_t rx_lock;
+ struct hci_uart_proto *proto;
+ void *priv;
+
+ struct sk_buff *tx_skb;
+ unsigned long tx_state;
+ spinlock_t rx_lock;
};
/* HCI_UART flag bits */
-#define HCI_UART_PROTO_SET 0
+#define HCI_UART_PROTO_SET 0
/* TX states */
-#define HCI_UART_SENDING 1
-#define HCI_UART_TX_WAKEUP 2
+#define HCI_UART_SENDING 1
+#define HCI_UART_TX_WAKEUP 2
int hci_uart_register_proto(struct hci_uart_proto *p);
int hci_uart_unregister_proto(struct hci_uart_proto *p);
int hci_uart_tx_wakeup(struct hci_uart *hu);
-#endif /* __KERNEL__ */
+#ifdef CONFIG_BT_HCIUART_H4
+int h4_init(void);
+int h4_deinit(void);
+#endif
+
+#ifdef CONFIG_BT_HCIUART_BCSP
+int bcsp_init(void);
+int bcsp_deinit(void);
+#endif
diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c
index 26271e3..8693835 100644
--- a/drivers/char/dsp56k.c
+++ b/drivers/char/dsp56k.c
@@ -515,7 +515,7 @@
err = PTR_ERR(dsp56k_class);
goto out_chrdev;
}
- class_device_create(dsp56k_class, MKDEV(DSP56K_MAJOR, 0), NULL, "dsp56k");
+ class_device_create(dsp56k_class, NULL, MKDEV(DSP56K_MAJOR, 0), NULL, "dsp56k");
err = devfs_mk_cdev(MKDEV(DSP56K_MAJOR, 0),
S_IFCHR | S_IRUSR | S_IWUSR, "dsp56k");
diff --git a/drivers/char/ftape/zftape/zftape-init.c b/drivers/char/ftape/zftape/zftape-init.c
index 5745b74..821357c 100644
--- a/drivers/char/ftape/zftape/zftape-init.c
+++ b/drivers/char/ftape/zftape/zftape-init.c
@@ -331,27 +331,27 @@
zft_class = class_create(THIS_MODULE, "zft");
for (i = 0; i < 4; i++) {
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i),
S_IFCHR | S_IRUSR | S_IWUSR,
"qft%i", i);
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 4), NULL, "nqft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 4), NULL, "nqft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 4),
S_IFCHR | S_IRUSR | S_IWUSR,
"nqft%i", i);
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 16), NULL, "zqft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 16), NULL, "zqft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 16),
S_IFCHR | S_IRUSR | S_IWUSR,
"zqft%i", i);
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 20), NULL, "nzqft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 20), NULL, "nzqft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 20),
S_IFCHR | S_IRUSR | S_IWUSR,
"nzqft%i", i);
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 32), NULL, "rawqft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 32), NULL, "rawqft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 32),
S_IFCHR | S_IRUSR | S_IWUSR,
"rawqft%i", i);
- class_device_create(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 36), NULL, "nrawrawqft%i", i);
+ class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 36), NULL, "nrawrawqft%i", i);
devfs_mk_cdev(MKDEV(QIC117_TAPE_MAJOR, i + 36),
S_IFCHR | S_IRUSR | S_IWUSR,
"nrawqft%i", i);
diff --git a/drivers/char/ip2main.c b/drivers/char/ip2main.c
index 9e4e26a..d815d19 100644
--- a/drivers/char/ip2main.c
+++ b/drivers/char/ip2main.c
@@ -721,8 +721,9 @@
}
if ( NULL != ( pB = i2BoardPtrTable[i] ) ) {
- class_device_create(ip2_class, MKDEV(IP2_IPL_MAJOR,
- 4 * i), NULL, "ipl%d", i);
+ class_device_create(ip2_class, NULL,
+ MKDEV(IP2_IPL_MAJOR, 4 * i),
+ NULL, "ipl%d", i);
err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i),
S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR,
"ip2/ipl%d", i);
@@ -732,8 +733,9 @@
goto out_class;
}
- class_device_create(ip2_class, MKDEV(IP2_IPL_MAJOR,
- 4 * i + 1), NULL, "stat%d", i);
+ class_device_create(ip2_class, NULL,
+ MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
+ NULL, "stat%d", i);
err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR,
"ip2/stat%d", i);
diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c
index a09ff10..7c0684d 100644
--- a/drivers/char/ipmi/ipmi_devintf.c
+++ b/drivers/char/ipmi/ipmi_devintf.c
@@ -798,7 +798,7 @@
devfs_mk_cdev(dev, S_IFCHR | S_IRUSR | S_IWUSR,
"ipmidev/%d", if_num);
- class_device_create(ipmi_class, dev, NULL, "ipmi%d", if_num);
+ class_device_create(ipmi_class, NULL, dev, NULL, "ipmi%d", if_num);
}
static void ipmi_smi_gone(int if_num)
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 9c19e54..e3ddbdb 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -5246,7 +5246,8 @@
devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i),
S_IFCHR | S_IRUSR | S_IWUSR,
"staliomem/%d", i);
- class_device_create(istallion_class, MKDEV(STL_SIOMEMMAJOR, i),
+ class_device_create(istallion_class, NULL,
+ MKDEV(STL_SIOMEMMAJOR, i),
NULL, "staliomem%d", i);
}
diff --git a/drivers/char/lp.c b/drivers/char/lp.c
index 2afb903..e572605 100644
--- a/drivers/char/lp.c
+++ b/drivers/char/lp.c
@@ -805,7 +805,7 @@
if (reset)
lp_reset(nr);
- class_device_create(lp_class, MKDEV(LP_MAJOR, nr), NULL,
+ class_device_create(lp_class, NULL, MKDEV(LP_MAJOR, nr), NULL,
"lp%d", nr);
devfs_mk_cdev(MKDEV(LP_MAJOR, nr), S_IFCHR | S_IRUGO | S_IWUGO,
"printers/%d", nr);
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index f182752..38be4b0 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -920,7 +920,8 @@
mem_class = class_create(THIS_MODULE, "mem");
for (i = 0; i < ARRAY_SIZE(devlist); i++) {
- class_device_create(mem_class, MKDEV(MEM_MAJOR, devlist[i].minor),
+ class_device_create(mem_class, NULL,
+ MKDEV(MEM_MAJOR, devlist[i].minor),
NULL, devlist[i].name);
devfs_mk_cdev(MKDEV(MEM_MAJOR, devlist[i].minor),
S_IFCHR | devlist[i].mode, devlist[i].name);
diff --git a/drivers/char/misc.c b/drivers/char/misc.c
index 0c837516..3e4c041 100644
--- a/drivers/char/misc.c
+++ b/drivers/char/misc.c
@@ -234,7 +234,7 @@
}
dev = MKDEV(MISC_MAJOR, misc->minor);
- misc->class = class_device_create(misc_class, dev, misc->dev,
+ misc->class = class_device_create(misc_class, NULL, dev, misc->dev,
"%s", misc->name);
if (IS_ERR(misc->class)) {
err = PTR_ERR(misc->class);
diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index 1af733d..9e24bbd 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -32,9 +32,11 @@
* added changelog
* 1.2 Erik Gilling: Cobalt Networks support
* Tim Hockin: general cleanup, Cobalt support
+ * 1.3 Jon Ringle: Comdial MP1000 support
+ *
*/
-#define NVRAM_VERSION "1.2"
+#define NVRAM_VERSION "1.3"
#include <linux/module.h>
#include <linux/config.h>
@@ -45,6 +47,7 @@
#define PC 1
#define ATARI 2
#define COBALT 3
+#define MP1000 4
/* select machine configuration */
#if defined(CONFIG_ATARI)
@@ -54,6 +57,9 @@
# if defined(CONFIG_COBALT)
# include <linux/cobalt-nvram.h>
# define MACH COBALT
+# elif defined(CONFIG_MACH_MP1000)
+# undef MACH
+# define MACH MP1000
# else
# define MACH PC
# endif
@@ -112,6 +118,23 @@
#endif
+#if MACH == MP1000
+
+/* RTC in a MP1000 */
+#define CHECK_DRIVER_INIT() 1
+
+#define MP1000_CKS_RANGE_START 0
+#define MP1000_CKS_RANGE_END 111
+#define MP1000_CKS_LOC 112
+
+#define NVRAM_BYTES (128-NVRAM_FIRST_BYTE)
+
+#define mach_check_checksum mp1000_check_checksum
+#define mach_set_checksum mp1000_set_checksum
+#define mach_proc_infos mp1000_proc_infos
+
+#endif
+
/* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with
* rtc_lock held. Due to the index-port/data-port design of the RTC, we
* don't want two different things trying to get to it at once. (e.g. the
@@ -915,6 +938,91 @@
#endif /* MACH == ATARI */
+#if MACH == MP1000
+
+static int
+mp1000_check_checksum(void)
+{
+ int i;
+ unsigned short sum = 0;
+ unsigned short expect;
+
+ for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i)
+ sum += __nvram_read_byte(i);
+
+ expect = __nvram_read_byte(MP1000_CKS_LOC+1)<<8 |
+ __nvram_read_byte(MP1000_CKS_LOC);
+ return ((sum & 0xffff) == expect);
+}
+
+static void
+mp1000_set_checksum(void)
+{
+ int i;
+ unsigned short sum = 0;
+
+ for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i)
+ sum += __nvram_read_byte(i);
+ __nvram_write_byte(sum >> 8, MP1000_CKS_LOC + 1);
+ __nvram_write_byte(sum & 0xff, MP1000_CKS_LOC);
+}
+
+#ifdef CONFIG_PROC_FS
+
+#define SERVER_N_LEN 32
+#define PATH_N_LEN 32
+#define FILE_N_LEN 32
+#define NVRAM_MAGIC_SIG 0xdead
+
+typedef struct NvRamImage
+{
+ unsigned short int magic;
+ unsigned short int mode;
+ char fname[FILE_N_LEN];
+ char path[PATH_N_LEN];
+ char server[SERVER_N_LEN];
+ char pad[12];
+} NvRam;
+
+static int
+mp1000_proc_infos(unsigned char *nvram, char *buffer, int *len,
+ off_t *begin, off_t offset, int size)
+{
+ int checksum;
+ NvRam* nv = (NvRam*)nvram;
+
+ spin_lock_irq(&rtc_lock);
+ checksum = __nvram_check_checksum();
+ spin_unlock_irq(&rtc_lock);
+
+ PRINT_PROC("Checksum status: %svalid\n", checksum ? "" : "not ");
+
+ switch( nv->mode )
+ {
+ case 0 :
+ PRINT_PROC( "\tMode 0, tftp prompt\n" );
+ break;
+ case 1 :
+ PRINT_PROC( "\tMode 1, booting from disk\n" );
+ break;
+ case 2 :
+ PRINT_PROC( "\tMode 2, Alternate boot from disk /boot/%s\n", nv->fname );
+ break;
+ case 3 :
+ PRINT_PROC( "\tMode 3, Booting from net:\n" );
+ PRINT_PROC( "\t\t%s:%s%s\n",nv->server, nv->path, nv->fname );
+ break;
+ default:
+ PRINT_PROC( "\tInconsistant nvram?\n" );
+ break;
+ }
+
+ return 1;
+}
+#endif
+
+#endif /* MACH == MP1000 */
+
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(__nvram_read_byte);
diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c
index 0e22880..306ee0f 100644
--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -752,7 +752,7 @@
static void pp_attach(struct parport *port)
{
- class_device_create(ppdev_class, MKDEV(PP_MAJOR, port->number),
+ class_device_create(ppdev_class, NULL, MKDEV(PP_MAJOR, port->number),
NULL, "parport%d", port->number);
}
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index f13e5de..30e4cbe 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -128,7 +128,7 @@
static void bind_device(struct raw_config_request *rq)
{
class_device_destroy(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor));
- class_device_create(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor),
+ class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, rq->raw_minor),
NULL, "raw%d", rq->raw_minor);
}
@@ -307,7 +307,7 @@
unregister_chrdev_region(dev, MAX_RAW_MINORS);
goto error;
}
- class_device_create(raw_class, MKDEV(RAW_MAJOR, 0), NULL, "rawctl");
+ class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), NULL, "rawctl");
devfs_mk_cdev(MKDEV(RAW_MAJOR, 0),
S_IFCHR | S_IRUGO | S_IWUGO,
diff --git a/drivers/char/s3c2410-rtc.c b/drivers/char/s3c2410-rtc.c
index e1a90d9..887b8b2 100644
--- a/drivers/char/s3c2410-rtc.c
+++ b/drivers/char/s3c2410-rtc.c
@@ -519,30 +519,28 @@
static int ticnt_save;
-static int s3c2410_rtc_suspend(struct device *dev, pm_message_t state, u32 level)
+static int s3c2410_rtc_suspend(struct device *dev, pm_message_t state)
{
struct rtc_time tm;
struct timespec time;
time.tv_nsec = 0;
- if (level == SUSPEND_POWER_DOWN) {
- /* save TICNT for anyone using periodic interrupts */
+ /* save TICNT for anyone using periodic interrupts */
- ticnt_save = readb(S3C2410_TICNT);
+ ticnt_save = readb(S3C2410_TICNT);
- /* calculate time delta for suspend */
+ /* calculate time delta for suspend */
- s3c2410_rtc_gettime(&tm);
- rtc_tm_to_time(&tm, &time.tv_sec);
- save_time_delta(&s3c2410_rtc_delta, &time);
- s3c2410_rtc_enable(dev, 0);
- }
+ s3c2410_rtc_gettime(&tm);
+ rtc_tm_to_time(&tm, &time.tv_sec);
+ save_time_delta(&s3c2410_rtc_delta, &time);
+ s3c2410_rtc_enable(dev, 0);
return 0;
}
-static int s3c2410_rtc_resume(struct device *dev, u32 level)
+static int s3c2410_rtc_resume(struct device *dev)
{
struct rtc_time tm;
struct timespec time;
diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c
index 261a41b..1758a83 100644
--- a/drivers/char/snsc.c
+++ b/drivers/char/snsc.c
@@ -437,7 +437,7 @@
continue;
}
- class_device_create(snsc_class, dev, NULL,
+ class_device_create(snsc_class, NULL, dev, NULL,
"%s", devname);
ia64_sn_irtr_intr_enable(scd->scd_nasid,
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 36ae9ad..f86c155 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -424,10 +424,6 @@
#define SONYPI_BUF_SIZE 128
-/* The name of the devices for the input device drivers */
-#define SONYPI_JOG_INPUTNAME "Sony Vaio Jogdial"
-#define SONYPI_KEY_INPUTNAME "Sony Vaio Keys"
-
/* Correspondance table between sonypi events and input layer events */
static struct {
int sonypiev;
@@ -490,8 +486,8 @@
struct fasync_struct *fifo_async;
int open_count;
int model;
- struct input_dev input_jog_dev;
- struct input_dev input_key_dev;
+ struct input_dev *input_jog_dev;
+ struct input_dev *input_key_dev;
struct work_struct input_work;
struct kfifo *input_fifo;
spinlock_t input_fifo_lock;
@@ -779,8 +775,8 @@
static void sonypi_report_input_event(u8 event)
{
- struct input_dev *jog_dev = &sonypi_device.input_jog_dev;
- struct input_dev *key_dev = &sonypi_device.input_key_dev;
+ struct input_dev *jog_dev = sonypi_device.input_jog_dev;
+ struct input_dev *key_dev = sonypi_device.input_key_dev;
struct sonypi_keypress kp = { NULL };
int i;
@@ -1171,19 +1167,17 @@
#ifdef CONFIG_PM
static int old_camera_power;
-static int sonypi_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sonypi_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_DISABLE) {
- old_camera_power = sonypi_device.camera_power;
- sonypi_disable();
- }
+ old_camera_power = sonypi_device.camera_power;
+ sonypi_disable();
+
return 0;
}
-static int sonypi_resume(struct device *dev, u32 level)
+static int sonypi_resume(struct device *dev)
{
- if (level == RESUME_ENABLE)
- sonypi_enable(old_camera_power);
+ sonypi_enable(old_camera_power);
return 0;
}
#endif
@@ -1203,6 +1197,47 @@
.shutdown = sonypi_shutdown,
};
+static int __devinit sonypi_create_input_devices(void)
+{
+ struct input_dev *jog_dev;
+ struct input_dev *key_dev;
+ int i;
+
+ sonypi_device.input_jog_dev = jog_dev = input_allocate_device();
+ if (!jog_dev)
+ return -ENOMEM;
+
+ jog_dev->name = "Sony Vaio Jogdial";
+ jog_dev->id.bustype = BUS_ISA;
+ jog_dev->id.vendor = PCI_VENDOR_ID_SONY;
+
+ jog_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ jog_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_MIDDLE);
+ jog_dev->relbit[0] = BIT(REL_WHEEL);
+
+ sonypi_device.input_key_dev = key_dev = input_allocate_device();
+ if (!key_dev) {
+ input_free_device(jog_dev);
+ sonypi_device.input_jog_dev = NULL;
+ return -ENOMEM;
+ }
+
+ key_dev->name = "Sony Vaio Keys";
+ key_dev->id.bustype = BUS_ISA;
+ key_dev->id.vendor = PCI_VENDOR_ID_SONY;
+
+ /* Initialize the Input Drivers: special keys */
+ key_dev->evbit[0] = BIT(EV_KEY);
+ for (i = 0; sonypi_inputkeys[i].sonypiev; i++)
+ if (sonypi_inputkeys[i].inputev)
+ set_bit(sonypi_inputkeys[i].inputev, key_dev->keybit);
+
+ input_register_device(jog_dev);
+ input_register_device(key_dev);
+
+ return 0;
+}
+
static int __devinit sonypi_probe(void)
{
int i, ret;
@@ -1298,34 +1333,10 @@
}
if (useinput) {
- /* Initialize the Input Drivers: jogdial */
- int i;
- sonypi_device.input_jog_dev.evbit[0] =
- BIT(EV_KEY) | BIT(EV_REL);
- sonypi_device.input_jog_dev.keybit[LONG(BTN_MOUSE)] =
- BIT(BTN_MIDDLE);
- sonypi_device.input_jog_dev.relbit[0] = BIT(REL_WHEEL);
- sonypi_device.input_jog_dev.name = SONYPI_JOG_INPUTNAME;
- sonypi_device.input_jog_dev.id.bustype = BUS_ISA;
- sonypi_device.input_jog_dev.id.vendor = PCI_VENDOR_ID_SONY;
- input_register_device(&sonypi_device.input_jog_dev);
- printk(KERN_INFO "%s input method installed.\n",
- sonypi_device.input_jog_dev.name);
-
- /* Initialize the Input Drivers: special keys */
- sonypi_device.input_key_dev.evbit[0] = BIT(EV_KEY);
- for (i = 0; sonypi_inputkeys[i].sonypiev; i++)
- if (sonypi_inputkeys[i].inputev)
- set_bit(sonypi_inputkeys[i].inputev,
- sonypi_device.input_key_dev.keybit);
- sonypi_device.input_key_dev.name = SONYPI_KEY_INPUTNAME;
- sonypi_device.input_key_dev.id.bustype = BUS_ISA;
- sonypi_device.input_key_dev.id.vendor = PCI_VENDOR_ID_SONY;
-
- input_register_device(&sonypi_device.input_key_dev);
- printk(KERN_INFO "%s input method installed.\n",
- sonypi_device.input_key_dev.name);
+ ret = sonypi_create_input_devices();
+ if (ret)
+ goto out_inputdevices;
spin_lock_init(&sonypi_device.input_fifo_lock);
sonypi_device.input_fifo =
@@ -1375,8 +1386,9 @@
out_platformdev:
kfifo_free(sonypi_device.input_fifo);
out_infifo:
- input_unregister_device(&sonypi_device.input_key_dev);
- input_unregister_device(&sonypi_device.input_jog_dev);
+ input_unregister_device(sonypi_device.input_key_dev);
+ input_unregister_device(sonypi_device.input_jog_dev);
+out_inputdevices:
free_irq(sonypi_device.irq, sonypi_irq);
out_reqirq:
release_region(sonypi_device.ioport1, sonypi_device.region_size);
@@ -1402,8 +1414,8 @@
platform_device_unregister(sonypi_device.pdev);
if (useinput) {
- input_unregister_device(&sonypi_device.input_key_dev);
- input_unregister_device(&sonypi_device.input_jog_dev);
+ input_unregister_device(sonypi_device.input_key_dev);
+ input_unregister_device(sonypi_device.input_jog_dev);
kfifo_free(sonypi_device.input_fifo);
}
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 951545a..1c68641 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -3095,7 +3095,9 @@
devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i),
S_IFCHR|S_IRUSR|S_IWUSR,
"staliomem/%d", i);
- class_device_create(stallion_class, MKDEV(STL_SIOMEMMAJOR, i), NULL, "staliomem%d", i);
+ class_device_create(stallion_class, NULL,
+ MKDEV(STL_SIOMEMMAJOR, i), NULL,
+ "staliomem%d", i);
}
stl_serial->owner = THIS_MODULE;
diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c
index ec78d2f..41a94bc 100644
--- a/drivers/char/tipar.c
+++ b/drivers/char/tipar.c
@@ -436,7 +436,7 @@
goto out;
}
- class_device_create(tipar_class, MKDEV(TIPAR_MAJOR,
+ class_device_create(tipar_class, NULL, MKDEV(TIPAR_MAJOR,
TIPAR_MINOR + nr), NULL, "par%d", nr);
/* Use devfs, tree: /dev/ticables/par/[0..2] */
err = devfs_mk_cdev(MKDEV(TIPAR_MAJOR, TIPAR_MINOR + nr),
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index e5953f3..f5649a3 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -2728,7 +2728,7 @@
pty_line_name(driver, index, name);
else
tty_line_name(driver, index, name);
- class_device_create(tty_class, dev, device, name);
+ class_device_create(tty_class, NULL, dev, device, "%s", name);
}
/**
@@ -2983,14 +2983,14 @@
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
panic("Couldn't register /dev/tty driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 0), S_IFCHR|S_IRUGO|S_IWUGO, "tty");
- class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
+ class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
cdev_init(&console_cdev, &console_fops);
if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
panic("Couldn't register /dev/console driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 1), S_IFCHR|S_IRUSR|S_IWUSR, "console");
- class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 1), NULL, "console");
+ class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL, "console");
#ifdef CONFIG_UNIX98_PTYS
cdev_init(&ptmx_cdev, &ptmx_fops);
@@ -2998,7 +2998,7 @@
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
panic("Couldn't register /dev/ptmx driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 2), S_IFCHR|S_IRUGO|S_IWUGO, "ptmx");
- class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
+ class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
#endif
#ifdef CONFIG_VT
@@ -3007,7 +3007,7 @@
register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
panic("Couldn't register /dev/tty0 driver\n");
devfs_mk_cdev(MKDEV(TTY_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "vc/0");
- class_device_create(tty_class, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
+ class_device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
vty_init();
#endif
diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c
index 79c2928..f66c7ad 100644
--- a/drivers/char/vc_screen.c
+++ b/drivers/char/vc_screen.c
@@ -484,8 +484,10 @@
devfs_mk_cdev(MKDEV(VCS_MAJOR, tty->index + 129),
S_IFCHR|S_IRUSR|S_IWUSR,
"vcc/a%u", tty->index + 1);
- class_device_create(vc_class, MKDEV(VCS_MAJOR, tty->index + 1), NULL, "vcs%u", tty->index + 1);
- class_device_create(vc_class, MKDEV(VCS_MAJOR, tty->index + 129), NULL, "vcsa%u", tty->index + 1);
+ class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 1),
+ NULL, "vcs%u", tty->index + 1);
+ class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 129),
+ NULL, "vcsa%u", tty->index + 1);
}
void vcs_remove_devfs(struct tty_struct *tty)
{
@@ -503,7 +505,7 @@
devfs_mk_cdev(MKDEV(VCS_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "vcc/0");
devfs_mk_cdev(MKDEV(VCS_MAJOR, 128), S_IFCHR|S_IRUSR|S_IWUSR, "vcc/a0");
- class_device_create(vc_class, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
- class_device_create(vc_class, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
+ class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
+ class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
return 0;
}
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index 0aff45f..a5e104f 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -956,9 +956,9 @@
state[i].cur_part = 0;
for (j = 0; j < MAX_PARTITIONS; ++j)
state[i].part_stat_rwi[j] = VIOT_IDLE;
- class_device_create(tape_class, MKDEV(VIOTAPE_MAJOR, i), NULL,
+ class_device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i), NULL,
"iseries!vt%d", i);
- class_device_create(tape_class, MKDEV(VIOTAPE_MAJOR, i | 0x80),
+ class_device_create(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i | 0x80),
NULL, "iseries!nvt%d", i);
devfs_mk_cdev(MKDEV(VIOTAPE_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR,
"iseries/vt%d", i);
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 3625b26..b732020 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -464,32 +464,28 @@
static unsigned long wtcon_save;
static unsigned long wtdat_save;
-static int s3c2410wdt_suspend(struct device *dev, pm_message_t state, u32 level)
+static int s3c2410wdt_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- /* Save watchdog state, and turn it off. */
- wtcon_save = readl(wdt_base + S3C2410_WTCON);
- wtdat_save = readl(wdt_base + S3C2410_WTDAT);
+ /* Save watchdog state, and turn it off. */
+ wtcon_save = readl(wdt_base + S3C2410_WTCON);
+ wtdat_save = readl(wdt_base + S3C2410_WTDAT);
- /* Note that WTCNT doesn't need to be saved. */
- s3c2410wdt_stop();
- }
+ /* Note that WTCNT doesn't need to be saved. */
+ s3c2410wdt_stop();
return 0;
}
-static int s3c2410wdt_resume(struct device *dev, u32 level)
+static int s3c2410wdt_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- /* Restore watchdog state. */
+ /* Restore watchdog state. */
- writel(wtdat_save, wdt_base + S3C2410_WTDAT);
- writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */
- writel(wtcon_save, wdt_base + S3C2410_WTCON);
+ writel(wtdat_save, wdt_base + S3C2410_WTDAT);
+ writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */
+ writel(wtcon_save, wdt_base + S3C2410_WTCON);
- printk(KERN_INFO PFX "watchdog %sabled\n",
- (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
- }
+ printk(KERN_INFO PFX "watchdog %sabled\n",
+ (wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
return 0;
}
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index e928cdb..8102876 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -121,7 +121,7 @@
static struct adm1021_data *adm1021_update_device(struct device *dev);
/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
-static int read_only = 0;
+static int read_only;
/* This is the driver that will be inserted */
@@ -204,11 +204,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access adm1021_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) {
err = -ENOMEM;
goto error0;
}
- memset(data, 0, sizeof(struct adm1021_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 526b7ff..3ec1242 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -331,11 +331,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct adm1025_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct adm1025_data));
/* The common I2C client data is placed right before the
ADM1025-specific data. */
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 6251581..e0f5654 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -315,7 +315,7 @@
.detach_client = adm1026_detach_client,
};
-int adm1026_attach_adapter(struct i2c_adapter *adapter)
+static int adm1026_attach_adapter(struct i2c_adapter *adapter)
{
if (!(adapter->class & I2C_CLASS_HWMON)) {
return 0;
@@ -323,7 +323,7 @@
return i2c_probe(adapter, &addr_data, adm1026_detect);
}
-int adm1026_detach_client(struct i2c_client *client)
+static int adm1026_detach_client(struct i2c_client *client)
{
struct adm1026_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->class_dev);
@@ -332,7 +332,7 @@
return 0;
}
-int adm1026_read_value(struct i2c_client *client, u8 reg)
+static int adm1026_read_value(struct i2c_client *client, u8 reg)
{
int res;
@@ -346,7 +346,7 @@
return res;
}
-int adm1026_write_value(struct i2c_client *client, u8 reg, int value)
+static int adm1026_write_value(struct i2c_client *client, u8 reg, int value)
{
int res;
@@ -360,7 +360,7 @@
return res;
}
-void adm1026_init_client(struct i2c_client *client)
+static void adm1026_init_client(struct i2c_client *client)
{
int value, i;
struct adm1026_data *data = i2c_get_clientdata(client);
@@ -460,7 +460,7 @@
}
}
-void adm1026_print_gpio(struct i2c_client *client)
+static void adm1026_print_gpio(struct i2c_client *client)
{
struct adm1026_data *data = i2c_get_clientdata(client);
int i;
@@ -492,7 +492,7 @@
}
}
-void adm1026_fixup_gpio(struct i2c_client *client)
+static void adm1026_fixup_gpio(struct i2c_client *client)
{
struct adm1026_data *data = i2c_get_clientdata(client);
int i;
@@ -1452,8 +1452,8 @@
static DEVICE_ATTR(temp2_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
static DEVICE_ATTR(temp3_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
-int adm1026_detect(struct i2c_adapter *adapter, int address,
- int kind)
+static int adm1026_detect(struct i2c_adapter *adapter, int address,
+ int kind)
{
int company, verstep;
struct i2c_client *new_client;
@@ -1470,13 +1470,11 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access adm1026_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct adm1026_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct adm1026_data));
-
new_client = &data->client;
i2c_set_clientdata(new_client, data);
new_client->addr = address;
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 58338ed..7c545d5 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -740,11 +740,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct adm1031_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct adm1031_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index bc7faef..11dc95f 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -45,6 +45,7 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
@@ -69,8 +70,7 @@
#define ADM9240_REG_INT(nr) (0x41 + (nr))
#define ADM9240_REG_INT_MASK(nr) (0x43 + (nr))
#define ADM9240_REG_TEMP 0x27
-#define ADM9240_REG_TEMP_HIGH 0x39
-#define ADM9240_REG_TEMP_HYST 0x3a
+#define ADM9240_REG_TEMP_MAX(nr) (0x39 + (nr)) /* 0, 1 = high, hyst */
#define ADM9240_REG_ANALOG_OUT 0x19
#define ADM9240_REG_CHASSIS_CLEAR 0x46
#define ADM9240_REG_VID_FAN_DIV 0x47
@@ -162,177 +162,155 @@
u8 fan_min[2]; /* rw fan1_min */
u8 fan_div[2]; /* rw fan1_div, read-only accessor */
s16 temp; /* ro temp1_input, 9-bit sign-extended */
- s8 temp_high; /* rw temp1_max */
- s8 temp_hyst; /* rw temp1_max_hyst */
+ s8 temp_max[2]; /* rw 0 -> temp_max, 1 -> temp_max_hyst */
u16 alarms; /* ro alarms */
u8 aout; /* rw aout_output */
u8 vid; /* ro vid */
u8 vrm; /* -- vrm set on startup, no accessor */
};
-/* i2c byte read/write interface */
-static int adm9240_read_value(struct i2c_client *client, u8 reg)
-{
- return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int adm9240_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
- return i2c_smbus_write_byte_data(client, reg, value);
-}
-
/*** sysfs accessors ***/
/* temperature */
-#define show_temp(value, scale) \
-static ssize_t show_##value(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- struct adm9240_data *data = adm9240_update_device(dev); \
- return sprintf(buf, "%d\n", data->value * scale); \
-}
-show_temp(temp_high, 1000);
-show_temp(temp_hyst, 1000);
-show_temp(temp, 500); /* 0.5'C per bit */
-
-#define set_temp(value, reg) \
-static ssize_t set_##value(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct adm9240_data *data = adm9240_update_device(dev); \
- long temp = simple_strtoul(buf, NULL, 10); \
- \
- down(&data->update_lock); \
- data->value = TEMP_TO_REG(temp); \
- adm9240_write_value(client, reg, data->value); \
- up(&data->update_lock); \
- return count; \
+static ssize_t show_temp(struct device *dev, struct device_attribute *dummy,
+ char *buf)
+{
+ struct adm9240_data *data = adm9240_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp * 500); /* 9-bit value */
}
-set_temp(temp_high, ADM9240_REG_TEMP_HIGH);
-set_temp(temp_hyst, ADM9240_REG_TEMP_HYST);
+static ssize_t show_max(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adm9240_data *data = adm9240_update_device(dev);
+ return sprintf(buf, "%d\n", data->temp_max[attr->index] * 1000);
+}
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
- show_temp_high, set_temp_high);
-static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
- show_temp_hyst, set_temp_hyst);
+static ssize_t set_max(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm9240_data *data = i2c_get_clientdata(client);
+ long val = simple_strtol(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->temp_max[attr->index] = TEMP_TO_REG(val);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_TEMP_MAX(attr->index),
+ data->temp_max[attr->index]);
+ up(&data->update_lock);
+ return count;
+}
+
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+ show_max, set_max, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
+ show_max, set_max, 1);
/* voltage */
-static ssize_t show_in(struct device *dev, char *buf, int nr)
+static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
+ char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr], nr));
+ return sprintf(buf, "%d\n", IN_FROM_REG(data->in[attr->index],
+ attr->index));
}
-static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+static ssize_t show_in_min(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr], nr));
+ return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[attr->index],
+ attr->index));
}
-static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+static ssize_t show_in_max(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr], nr));
+ return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[attr->index],
+ attr->index));
}
-static ssize_t set_in_min(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_in_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adm9240_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
down(&data->update_lock);
- data->in_min[nr] = IN_TO_REG(val, nr);
- adm9240_write_value(client, ADM9240_REG_IN_MIN(nr), data->in_min[nr]);
+ data->in_min[attr->index] = IN_TO_REG(val, attr->index);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MIN(attr->index),
+ data->in_min[attr->index]);
up(&data->update_lock);
return count;
}
-static ssize_t set_in_max(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_in_max(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adm9240_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
down(&data->update_lock);
- data->in_max[nr] = IN_TO_REG(val, nr);
- adm9240_write_value(client, ADM9240_REG_IN_MAX(nr), data->in_max[nr]);
+ data->in_max[attr->index] = IN_TO_REG(val, attr->index);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_IN_MAX(attr->index),
+ data->in_max[attr->index]);
up(&data->update_lock);
return count;
}
-#define show_in_offset(offset) \
-static ssize_t show_in##offset(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_in(dev, buf, offset); \
-} \
-static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); \
-static ssize_t show_in##offset##_min(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_in_min(dev, buf, offset); \
-} \
-static ssize_t show_in##offset##_max(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
- return show_in_max(dev, buf, offset); \
-} \
-static ssize_t \
-set_in##offset##_min(struct device *dev, \
- struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- return set_in_min(dev, buf, count, offset); \
-} \
-static ssize_t \
-set_in##offset##_max(struct device *dev, \
- struct device_attribute *attr, const char *buf, \
- size_t count) \
-{ \
- return set_in_max(dev, buf, count, offset); \
-} \
-static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
- show_in##offset##_min, set_in##offset##_min); \
-static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
- show_in##offset##_max, set_in##offset##_max);
+#define vin(nr) \
+static SENSOR_DEVICE_ATTR(in##nr##_input, S_IRUGO, \
+ show_in, NULL, nr); \
+static SENSOR_DEVICE_ATTR(in##nr##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, set_in_min, nr); \
+static SENSOR_DEVICE_ATTR(in##nr##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, set_in_max, nr);
-show_in_offset(0);
-show_in_offset(1);
-show_in_offset(2);
-show_in_offset(3);
-show_in_offset(4);
-show_in_offset(5);
+vin(0);
+vin(1);
+vin(2);
+vin(3);
+vin(4);
+vin(5);
/* fans */
-static ssize_t show_fan(struct device *dev, char *buf, int nr)
+static ssize_t show_fan(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
- 1 << data->fan_div[nr]));
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
+ 1 << data->fan_div[attr->index]));
}
-static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+static ssize_t show_fan_min(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
- 1 << data->fan_div[nr]));
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[attr->index],
+ 1 << data->fan_div[attr->index]));
}
-static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
+static ssize_t show_fan_div(struct device *dev,
+ struct device_attribute *devattr, char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct adm9240_data *data = adm9240_update_device(dev);
- return sprintf(buf, "%d\n", 1 << data->fan_div[nr]);
+ return sprintf(buf, "%d\n", 1 << data->fan_div[attr->index]);
}
/* write new fan div, callers must hold data->update_lock */
@@ -341,16 +319,16 @@
{
u8 reg, old, shift = (nr + 2) * 2;
- reg = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV);
+ reg = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
old = (reg >> shift) & 3;
reg &= ~(3 << shift);
reg |= (fan_div << shift);
- adm9240_write_value(client, ADM9240_REG_VID_FAN_DIV, reg);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_VID_FAN_DIV, reg);
dev_dbg(&client->dev, "fan%d clock divider changed from %u "
"to %u\n", nr + 1, 1 << old, 1 << fan_div);
}
-/*
+/*
* set fan speed low limit:
*
* - value is zero: disable fan speed low limit alarm
@@ -361,12 +339,15 @@
* - otherwise: select fan clock divider to suit fan speed low limit,
* measurement code may adjust registers to ensure fan speed reading
*/
-static ssize_t set_fan_min(struct device *dev, const char *buf,
- size_t count, int nr)
+static ssize_t set_fan_min(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct i2c_client *client = to_i2c_client(dev);
struct adm9240_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
+ int nr = attr->index;
u8 new_div;
down(&data->update_lock);
@@ -406,50 +387,27 @@
data->fan_div[nr] = new_div;
adm9240_write_fan_div(client, nr, new_div);
}
- adm9240_write_value(client, ADM9240_REG_FAN_MIN(nr),
+ i2c_smbus_write_byte_data(client, ADM9240_REG_FAN_MIN(nr),
data->fan_min[nr]);
up(&data->update_lock);
return count;
}
-#define show_fan_offset(offset) \
-static ssize_t show_fan_##offset (struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
-return show_fan(dev, buf, offset - 1); \
-} \
-static ssize_t show_fan_##offset##_div (struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
-return show_fan_div(dev, buf, offset - 1); \
-} \
-static ssize_t show_fan_##offset##_min (struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{ \
-return show_fan_min(dev, buf, offset - 1); \
-} \
-static ssize_t set_fan_##offset##_min (struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
-return set_fan_min(dev, buf, count, offset - 1); \
-} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
- show_fan_##offset, NULL); \
-static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \
- show_fan_##offset##_div, NULL); \
-static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
- show_fan_##offset##_min, set_fan_##offset##_min);
+#define fan(nr) \
+static SENSOR_DEVICE_ATTR(fan##nr##_input, S_IRUGO, \
+ show_fan, NULL, nr - 1); \
+static SENSOR_DEVICE_ATTR(fan##nr##_div, S_IRUGO, \
+ show_fan_div, NULL, nr - 1); \
+static SENSOR_DEVICE_ATTR(fan##nr##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, set_fan_min, nr - 1);
-show_fan_offset(1);
-show_fan_offset(2);
+fan(1);
+fan(2);
/* alarms */
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_alarms(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct adm9240_data *data = adm9240_update_device(dev);
return sprintf(buf, "%u\n", data->alarms);
@@ -457,7 +415,8 @@
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
/* vid */
-static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_vid(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct adm9240_data *data = adm9240_update_device(dev);
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
@@ -465,13 +424,16 @@
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
/* analog output */
-static ssize_t show_aout(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_aout(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct adm9240_data *data = adm9240_update_device(dev);
return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout));
}
-static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t set_aout(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct adm9240_data *data = i2c_get_clientdata(client);
@@ -479,20 +441,23 @@
down(&data->update_lock);
data->aout = AOUT_TO_REG(val);
- adm9240_write_value(client, ADM9240_REG_ANALOG_OUT, data->aout);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_ANALOG_OUT, data->aout);
up(&data->update_lock);
return count;
}
static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
/* chassis_clear */
-static ssize_t chassis_clear(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t chassis_clear(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
unsigned long val = simple_strtol(buf, NULL, 10);
if (val == 1) {
- adm9240_write_value(client, ADM9240_REG_CHASSIS_CLEAR, 0x80);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_CHASSIS_CLEAR, 0x80);
dev_dbg(&client->dev, "chassis intrusion latch cleared\n");
}
return count;
@@ -513,11 +478,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct adm9240_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(*data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct adm9240_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -533,7 +497,7 @@
if (kind < 0) {
/* verify chip: reg address should match i2c address */
- if (adm9240_read_value(new_client, ADM9240_REG_I2C_ADDR)
+ if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR)
!= address) {
dev_err(&adapter->dev, "detect fail: address match, "
"0x%02x\n", address);
@@ -541,8 +505,8 @@
}
/* check known chip manufacturer */
- man_id = adm9240_read_value(new_client, ADM9240_REG_MAN_ID);
-
+ man_id = i2c_smbus_read_byte_data(new_client,
+ ADM9240_REG_MAN_ID);
if (man_id == 0x23) {
kind = adm9240;
} else if (man_id == 0xda) {
@@ -556,7 +520,8 @@
}
/* successful detect, print chip info */
- die_rev = adm9240_read_value(new_client, ADM9240_REG_DIE_REV);
+ die_rev = i2c_smbus_read_byte_data(new_client,
+ ADM9240_REG_DIE_REV);
dev_info(&adapter->dev, "found %s revision %u\n",
man_id == 0x23 ? "ADM9240" :
man_id == 0xda ? "DS1780" : "LM81", die_rev);
@@ -588,33 +553,59 @@
goto exit_detach;
}
- device_create_file(&new_client->dev, &dev_attr_in0_input);
- device_create_file(&new_client->dev, &dev_attr_in0_min);
- device_create_file(&new_client->dev, &dev_attr_in0_max);
- device_create_file(&new_client->dev, &dev_attr_in1_input);
- device_create_file(&new_client->dev, &dev_attr_in1_min);
- device_create_file(&new_client->dev, &dev_attr_in1_max);
- device_create_file(&new_client->dev, &dev_attr_in2_input);
- device_create_file(&new_client->dev, &dev_attr_in2_min);
- device_create_file(&new_client->dev, &dev_attr_in2_max);
- device_create_file(&new_client->dev, &dev_attr_in3_input);
- device_create_file(&new_client->dev, &dev_attr_in3_min);
- device_create_file(&new_client->dev, &dev_attr_in3_max);
- device_create_file(&new_client->dev, &dev_attr_in4_input);
- device_create_file(&new_client->dev, &dev_attr_in4_min);
- device_create_file(&new_client->dev, &dev_attr_in4_max);
- device_create_file(&new_client->dev, &dev_attr_in5_input);
- device_create_file(&new_client->dev, &dev_attr_in5_min);
- device_create_file(&new_client->dev, &dev_attr_in5_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_max);
- device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in0_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in0_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in0_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in1_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in1_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in1_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in2_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in2_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in2_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in3_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in3_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in3_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in4_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in4_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in4_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in5_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in5_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_in5_max.dev_attr);
device_create_file(&new_client->dev, &dev_attr_temp1_input);
- device_create_file(&new_client->dev, &dev_attr_fan1_input);
- device_create_file(&new_client->dev, &dev_attr_fan1_div);
- device_create_file(&new_client->dev, &dev_attr_fan1_min);
- device_create_file(&new_client->dev, &dev_attr_fan2_input);
- device_create_file(&new_client->dev, &dev_attr_fan2_div);
- device_create_file(&new_client->dev, &dev_attr_fan2_min);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp1_max.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_div.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan1_min.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_div.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_fan2_min.dev_attr);
device_create_file(&new_client->dev, &dev_attr_alarms);
device_create_file(&new_client->dev, &dev_attr_aout_output);
device_create_file(&new_client->dev, &dev_attr_chassis_clear);
@@ -654,8 +645,8 @@
static void adm9240_init_client(struct i2c_client *client)
{
struct adm9240_data *data = i2c_get_clientdata(client);
- u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG);
- u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3;
+ u8 conf = i2c_smbus_read_byte_data(client, ADM9240_REG_CONFIG);
+ u8 mode = i2c_smbus_read_byte_data(client, ADM9240_REG_TEMP_CONF) & 3;
data->vrm = vid_which_vrm(); /* need this to report vid as mV */
@@ -672,18 +663,22 @@
for (i = 0; i < 6; i++)
{
- adm9240_write_value(client,
+ i2c_smbus_write_byte_data(client,
ADM9240_REG_IN_MIN(i), 0);
- adm9240_write_value(client,
+ i2c_smbus_write_byte_data(client,
ADM9240_REG_IN_MAX(i), 255);
}
- adm9240_write_value(client, ADM9240_REG_FAN_MIN(0), 255);
- adm9240_write_value(client, ADM9240_REG_FAN_MIN(1), 255);
- adm9240_write_value(client, ADM9240_REG_TEMP_HIGH, 127);
- adm9240_write_value(client, ADM9240_REG_TEMP_HYST, 127);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_FAN_MIN(0), 255);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_FAN_MIN(1), 255);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_TEMP_MAX(0), 127);
+ i2c_smbus_write_byte_data(client,
+ ADM9240_REG_TEMP_MAX(1), 127);
/* start measurement cycle */
- adm9240_write_value(client, ADM9240_REG_CONFIG, 1);
+ i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1);
dev_info(&client->dev, "cold start: config was 0x%02x "
"mode %u\n", conf, mode);
@@ -704,25 +699,25 @@
for (i = 0; i < 6; i++) /* read voltages */
{
- data->in[i] = adm9240_read_value(client,
+ data->in[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_IN(i));
}
- data->alarms = adm9240_read_value(client,
+ data->alarms = i2c_smbus_read_byte_data(client,
ADM9240_REG_INT(0)) |
- adm9240_read_value(client,
+ i2c_smbus_read_byte_data(client,
ADM9240_REG_INT(1)) << 8;
/* read temperature: assume temperature changes less than
* 0.5'C per two measurement cycles thus ignore possible
* but unlikely aliasing error on lsb reading. --Grant */
- data->temp = ((adm9240_read_value(client,
+ data->temp = ((i2c_smbus_read_byte_data(client,
ADM9240_REG_TEMP) << 8) |
- adm9240_read_value(client,
+ i2c_smbus_read_byte_data(client,
ADM9240_REG_TEMP_CONF)) / 128;
for (i = 0; i < 2; i++) /* read fans */
{
- data->fan[i] = adm9240_read_value(client,
+ data->fan[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_FAN(i));
/* adjust fan clock divider on overflow */
@@ -747,30 +742,30 @@
for (i = 0; i < 6; i++)
{
- data->in_min[i] = adm9240_read_value(client,
+ data->in_min[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_IN_MIN(i));
- data->in_max[i] = adm9240_read_value(client,
+ data->in_max[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_IN_MAX(i));
}
for (i = 0; i < 2; i++)
{
- data->fan_min[i] = adm9240_read_value(client,
+ data->fan_min[i] = i2c_smbus_read_byte_data(client,
ADM9240_REG_FAN_MIN(i));
}
- data->temp_high = adm9240_read_value(client,
- ADM9240_REG_TEMP_HIGH);
- data->temp_hyst = adm9240_read_value(client,
- ADM9240_REG_TEMP_HYST);
+ data->temp_max[0] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_TEMP_MAX(0));
+ data->temp_max[1] = i2c_smbus_read_byte_data(client,
+ ADM9240_REG_TEMP_MAX(1));
/* read fan divs and 5-bit VID */
- i = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV);
+ i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
data->fan_div[0] = (i >> 4) & 3;
data->fan_div[1] = (i >> 6) & 3;
data->vid = i & 0x0f;
- data->vid |= (adm9240_read_value(client,
+ data->vid |= (i2c_smbus_read_byte_data(client,
ADM9240_REG_VID4) & 1) << 4;
/* read analog out */
- data->aout = adm9240_read_value(client,
+ data->aout = i2c_smbus_read_byte_data(client,
ADM9240_REG_ANALOG_OUT);
data->last_updated_config = jiffies;
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 8e34855..52c4697 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -629,19 +629,17 @@
int i, id, err;
struct asb100_data *data = i2c_get_clientdata(new_client);
- data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[0])) {
err = -ENOMEM;
goto ERROR_SC_0;
}
- memset(data->lm75[0], 0x00, sizeof(struct i2c_client));
- data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[1])) {
err = -ENOMEM;
goto ERROR_SC_1;
}
- memset(data->lm75[1], 0x00, sizeof(struct i2c_client));
id = i2c_adapter_id(adapter);
@@ -724,12 +722,11 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access asb100_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
- pr_debug("asb100.o: detect failed, kmalloc failed!\n");
+ if (!(data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
+ pr_debug("asb100.o: detect failed, kzalloc failed!\n");
err = -ENOMEM;
goto ERROR0;
}
- memset(data, 0, sizeof(struct asb100_data));
new_client = &data->client;
init_MUTEX(&data->lock);
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index deb4d34c..53324f5 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -253,6 +253,8 @@
static int atxp1_attach_adapter(struct i2c_adapter *adapter)
{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
return i2c_probe(adapter, &addr_data, &atxp1_detect);
};
@@ -266,12 +268,11 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct atxp1_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct atxp1_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index b0199e0..34f71b7 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -180,12 +180,14 @@
static int ds1621_attach_adapter(struct i2c_adapter *adapter)
{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
return i2c_probe(adapter, &addr_data, ds1621_detect);
}
/* This function is called by i2c_probe */
-int ds1621_detect(struct i2c_adapter *adapter, int address,
- int kind)
+static int ds1621_detect(struct i2c_adapter *adapter, int address,
+ int kind)
{
int conf, temp;
struct i2c_client *new_client;
@@ -200,11 +202,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access ds1621_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct ds1621_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
index eef6061..a02e1c3 100644
--- a/drivers/hwmon/fscher.c
+++ b/drivers/hwmon/fscher.c
@@ -303,11 +303,10 @@
/* OK. For now, we presume we have a valid client. We now create the
* client structure, even though we cannot fill it completely yet.
* But it allows us to access i2c_smbus_read_byte_data. */
- if (!(data = kmalloc(sizeof(struct fscher_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct fscher_data));
/* The common I2C client data is placed right before the
* Hermes-specific data. */
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
index 5fc77a5f..64e4edc 100644
--- a/drivers/hwmon/fscpos.c
+++ b/drivers/hwmon/fscpos.c
@@ -438,7 +438,7 @@
return i2c_probe(adapter, &addr_data, fscpos_detect);
}
-int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
+static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct fscpos_data *data;
@@ -453,11 +453,10 @@
* But it allows us to access fscpos_{read,write}_value.
*/
- if (!(data = kmalloc(sizeof(struct fscpos_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct fscpos_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 256b932..2f178db 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -365,11 +365,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access gl518_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct gl518_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 12fd757..c39ba12 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -536,11 +536,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access gl520_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct gl520_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct gl520_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index 7f01076..0015da5 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -296,11 +296,9 @@
return 0;
}
-static int hdaps_resume(struct device *dev, u32 level)
+static int hdaps_resume(struct device *dev)
{
- if (level == RESUME_ENABLE)
- return hdaps_device_init();
- return 0;
+ return hdaps_device_init();
}
static struct device_driver hdaps_driver = {
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index 9b41c9b..6f48579 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -45,7 +45,7 @@
return ERR_PTR(-ENOMEM);
id = id & MAX_ID_MASK;
- cdev = class_device_create(hwmon_class, MKDEV(0,0), dev,
+ cdev = class_device_create(hwmon_class, NULL, MKDEV(0,0), dev,
HWMON_ID_FORMAT, id);
if (IS_ERR(cdev))
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 53cc2b6..6c41e25 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -2,7 +2,7 @@
it87.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring.
- Supports: IT8705F Super I/O chip w/LPC interface & SMBus
+ Supports: IT8705F Super I/O chip w/LPC interface
IT8712F Super I/O chip w/LPC interface & SMBus
Sis950 A clone of the IT8705F
@@ -47,7 +47,7 @@
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
0x2e, 0x2f, I2C_CLIENT_END };
-static unsigned short isa_address = 0x290;
+static unsigned short isa_address;
/* Insmod parameters */
I2C_CLIENT_INSMOD_2(it87, it8712);
@@ -706,7 +706,7 @@
}
/* SuperIO detection - will change isa_address if a chip is found */
-static int __init it87_find(int *address)
+static int __init it87_find(unsigned short *address)
{
int err = -ENODEV;
@@ -738,7 +738,7 @@
}
/* This function is called by i2c_probe */
-int it87_detect(struct i2c_adapter *adapter, int address, int kind)
+static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i;
struct i2c_client *new_client;
@@ -757,42 +757,14 @@
if (!request_region(address, IT87_EXTENT, it87_isa_driver.name))
goto ERROR0;
- /* Probe whether there is anything available on this address. Already
- done for SMBus and Super-I/O clients */
- if (kind < 0) {
- if (is_isa && !chip_type) {
-#define REALLY_SLOW_IO
- /* We need the timeouts for at least some IT87-like chips. But only
- if we read 'undefined' registers. */
- i = inb_p(address + 1);
- if (inb_p(address + 2) != i
- || inb_p(address + 3) != i
- || inb_p(address + 7) != i) {
- err = -ENODEV;
- goto ERROR1;
- }
-#undef REALLY_SLOW_IO
-
- /* Let's just hope nothing breaks here */
- i = inb_p(address + 5) & 0x7f;
- outb_p(~i & 0x7f, address + 5);
- if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) {
- outb_p(i, address + 5);
- err = -ENODEV;
- goto ERROR1;
- }
- }
- }
-
- /* OK. For now, we presume we have a valid client. We now create the
+ /* For now, we presume we have a valid client. We create the
client structure, even though we cannot fill it completely yet.
But it allows us to access it87_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct it87_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct it87_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR1;
}
- memset(data, 0, sizeof(struct it87_data));
new_client = &data->client;
if (is_isa)
@@ -1182,20 +1154,18 @@
static int __init sm_it87_init(void)
{
- int addr, res;
-
- if (!it87_find(&addr)) {
- isa_address = addr;
- }
+ int res;
res = i2c_add_driver(&it87_driver);
if (res)
return res;
- res = i2c_isa_add_driver(&it87_isa_driver);
- if (res) {
- i2c_del_driver(&it87_driver);
- return res;
+ if (!it87_find(&isa_address)) {
+ res = i2c_isa_add_driver(&it87_isa_driver);
+ if (res) {
+ i2c_del_driver(&it87_driver);
+ return res;
+ }
}
return 0;
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index be5c709..954ec24 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -375,11 +375,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm63_data));
/* The common I2C client data is placed right before the
LM63-specific data. */
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 9a3ebdf..d70f4c8 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -127,11 +127,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access lm75_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm75_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 866eab9..9380fda 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -226,11 +226,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access lm77_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct lm77_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm77_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index f6730dc..bde0cda 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -480,7 +480,7 @@
}
/* This function is called by i2c_probe */
-int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
+static int lm78_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i, err;
struct i2c_client *new_client;
@@ -540,11 +540,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access lm78_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct lm78_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR1;
}
- memset(data, 0, sizeof(struct lm78_data));
new_client = &data->client;
if (is_isa)
@@ -726,7 +725,6 @@
return i2c_smbus_write_byte_data(client, reg, value);
}
-/* Called when we have found a new LM78. It should set limits, etc. */
static void lm78_init_client(struct i2c_client *client)
{
u8 config = lm78_read_value(client, LM78_REG_CONFIG);
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index 83af8b3..c359fde 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -393,7 +393,7 @@
return i2c_probe(adapter, &addr_data, lm80_detect);
}
-int lm80_detect(struct i2c_adapter *adapter, int address, int kind)
+static int lm80_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i, cur;
struct i2c_client *new_client;
@@ -407,11 +407,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access lm80_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct lm80_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm80_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index d74b2c2..9a70611 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -230,11 +230,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm83_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm83_data));
/* The common I2C client data is placed right after the
* LM83-specific data. */
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index ab214df..d1070ed 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -1007,14 +1007,14 @@
temp_auto(2);
temp_auto(3);
-int lm85_attach_adapter(struct i2c_adapter *adapter)
+static int lm85_attach_adapter(struct i2c_adapter *adapter)
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
return i2c_probe(adapter, &addr_data, lm85_detect);
}
-int lm85_detect(struct i2c_adapter *adapter, int address,
+static int lm85_detect(struct i2c_adapter *adapter, int address,
int kind)
{
int company, verstep ;
@@ -1033,11 +1033,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access lm85_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct lm85_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm85_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
- memset(data, 0, sizeof(struct lm85_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -1236,7 +1235,7 @@
return err;
}
-int lm85_detach_client(struct i2c_client *client)
+static int lm85_detach_client(struct i2c_client *client)
{
struct lm85_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->class_dev);
@@ -1246,7 +1245,7 @@
}
-int lm85_read_value(struct i2c_client *client, u8 reg)
+static int lm85_read_value(struct i2c_client *client, u8 reg)
{
int res;
@@ -1276,7 +1275,7 @@
return res ;
}
-int lm85_write_value(struct i2c_client *client, u8 reg, int value)
+static int lm85_write_value(struct i2c_client *client, u8 reg, int value)
{
int res ;
@@ -1305,7 +1304,7 @@
return res ;
}
-void lm85_init_client(struct i2c_client *client)
+static void lm85_init_client(struct i2c_client *client)
{
int value;
struct lm85_data *data = i2c_get_clientdata(client);
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index dca996d..eeec1817 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -554,11 +554,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm87_data));
/* The common I2C client data is placed right before the
LM87-specific data. */
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 14de05f..83cf2e1 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -31,7 +31,7 @@
* Devices. That chip is similar to the LM90, with a few differences
* that are not handled by this driver. Complete datasheet can be
* obtained from Analog's website at:
- * http://products.analog.com/products/info.asp?product=ADM1032
+ * http://www.analog.com/en/prod/0,2877,ADM1032,00.html
* Among others, it has a higher accuracy than the LM90, much like the
* LM86 does.
*
@@ -49,7 +49,7 @@
* register values are decoded differently) it is ignored by this
* driver. Complete datasheet can be obtained from Analog's website
* at:
- * http://products.analog.com/products/info.asp?product=ADT7461
+ * http://www.analog.com/en/prod/0,2877,ADT7461,00.html
*
* Since the LM90 was the first chipset supported by this driver, most
* comments will refer to this chipset, but are actually general and
@@ -83,10 +83,10 @@
* Addresses to scan
* Address is fully defined internally and cannot be changed except for
* MAX6659.
- * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c.
- * LM89-1, and LM99-1 have address 0x4d.
+ * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6657 and MAX6658
+ * have address 0x4c.
+ * ADM1032-2, ADT7461-2, LM89-1, and LM99-1 have address 0x4d.
* MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported).
- * ADT7461 always has address 0x4c.
*/
static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END };
@@ -345,10 +345,74 @@
static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4);
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+/* pec used for ADM1032 only */
+static ssize_t show_pec(struct device *dev, struct device_attribute *dummy,
+ char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ return sprintf(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC));
+}
+
+static ssize_t set_pec(struct device *dev, struct device_attribute *dummy,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ long val = simple_strtol(buf, NULL, 10);
+
+ switch (val) {
+ case 0:
+ client->flags &= ~I2C_CLIENT_PEC;
+ break;
+ case 1:
+ client->flags |= I2C_CLIENT_PEC;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(pec, S_IWUSR | S_IRUGO, show_pec, set_pec);
+
/*
* Real code
*/
+/* The ADM1032 supports PEC but not on write byte transactions, so we need
+ to explicitely ask for a transaction without PEC. */
+static inline s32 adm1032_write_byte(struct i2c_client *client, u8 value)
+{
+ return i2c_smbus_xfer(client->adapter, client->addr,
+ client->flags & ~I2C_CLIENT_PEC,
+ I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
+}
+
+/* It is assumed that client->update_lock is held (unless we are in
+ detection or initialization steps). This matters when PEC is enabled,
+ because we don't want the address pointer to change between the write
+ byte and the read byte transactions. */
+static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value)
+{
+ int err;
+
+ if (client->flags & I2C_CLIENT_PEC) {
+ err = adm1032_write_byte(client, reg);
+ if (err >= 0)
+ err = i2c_smbus_read_byte(client);
+ } else
+ err = i2c_smbus_read_byte_data(client, reg);
+
+ if (err < 0) {
+ dev_warn(&client->dev, "Register %#02x read failed (%d)\n",
+ reg, err);
+ return err;
+ }
+ *value = err;
+
+ return 0;
+}
+
static int lm90_attach_adapter(struct i2c_adapter *adapter)
{
if (!(adapter->class & I2C_CLASS_HWMON))
@@ -370,11 +434,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm90_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm90_data));
/* The common I2C client data is placed right before the
LM90-specific data. */
@@ -403,20 +466,22 @@
if (kind < 0) { /* detection and identification */
u8 man_id, chip_id, reg_config1, reg_convrate;
- man_id = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CHIP_ID);
- reg_config1 = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONFIG1);
- reg_convrate = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONVRATE);
+ if (lm90_read_reg(new_client, LM90_REG_R_MAN_ID,
+ &man_id) < 0
+ || lm90_read_reg(new_client, LM90_REG_R_CHIP_ID,
+ &chip_id) < 0
+ || lm90_read_reg(new_client, LM90_REG_R_CONFIG1,
+ ®_config1) < 0
+ || lm90_read_reg(new_client, LM90_REG_R_CONVRATE,
+ ®_convrate) < 0)
+ goto exit_free;
if (man_id == 0x01) { /* National Semiconductor */
u8 reg_config2;
- reg_config2 = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONFIG2);
+ if (lm90_read_reg(new_client, LM90_REG_R_CONFIG2,
+ ®_config2) < 0)
+ goto exit_free;
if ((reg_config1 & 0x2A) == 0x00
&& (reg_config2 & 0xF8) == 0x00
@@ -435,14 +500,12 @@
}
} else
if (man_id == 0x41) { /* Analog Devices */
- if (address == 0x4C
- && (chip_id & 0xF0) == 0x40 /* ADM1032 */
+ if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
&& (reg_config1 & 0x3F) == 0x00
&& reg_convrate <= 0x0A) {
kind = adm1032;
} else
- if (address == 0x4c
- && chip_id == 0x51 /* ADT7461 */
+ if (chip_id == 0x51 /* ADT7461 */
&& (reg_config1 & 0x1F) == 0x00 /* check compat mode */
&& reg_convrate <= 0x0A) {
kind = adt7461;
@@ -477,6 +540,10 @@
name = "lm90";
} else if (kind == adm1032) {
name = "adm1032";
+ /* The ADM1032 supports PEC, but only if combined
+ transactions are not used. */
+ if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+ new_client->flags |= I2C_CLIENT_PEC;
} else if (kind == lm99) {
name = "lm99";
} else if (kind == lm86) {
@@ -529,6 +596,9 @@
&sensor_dev_attr_temp2_crit_hyst.dev_attr);
device_create_file(&new_client->dev, &dev_attr_alarms);
+ if (new_client->flags & I2C_CLIENT_PEC)
+ device_create_file(&new_client->dev, &dev_attr_pec);
+
return 0;
exit_detach:
@@ -548,7 +618,10 @@
*/
i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
5); /* 2 Hz */
- config = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1);
+ if (lm90_read_reg(client, LM90_REG_R_CONFIG1, &config) < 0) {
+ dev_warn(&client->dev, "Initialization failed!\n");
+ return;
+ }
if (config & 0x40)
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
config & 0xBF); /* run */
@@ -576,21 +649,15 @@
down(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
- u8 oldh, newh;
+ u8 oldh, newh, l;
dev_dbg(&client->dev, "Updating lm90 data.\n");
- data->temp8[0] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_LOCAL_TEMP);
- data->temp8[1] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_LOCAL_LOW);
- data->temp8[2] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_LOCAL_HIGH);
- data->temp8[3] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_LOCAL_CRIT);
- data->temp8[4] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_CRIT);
- data->temp_hyst = i2c_smbus_read_byte_data(client,
- LM90_REG_R_TCRIT_HYST);
+ lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP, &data->temp8[0]);
+ lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[1]);
+ lm90_read_reg(client, LM90_REG_R_LOCAL_HIGH, &data->temp8[2]);
+ lm90_read_reg(client, LM90_REG_R_LOCAL_CRIT, &data->temp8[3]);
+ lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[4]);
+ lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst);
/*
* There is a trick here. We have to read two registers to
@@ -606,36 +673,20 @@
* then we have a valid reading. Else we have to read the low
* byte again, and now we believe we have a correct reading.
*/
- oldh = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_TEMPH);
- data->temp11[0] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_TEMPL);
- newh = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_TEMPH);
- if (newh != oldh) {
- data->temp11[0] = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_TEMPL);
-#ifdef DEBUG
- oldh = i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_TEMPH);
- /* oldh is actually newer */
- if (newh != oldh)
- dev_warn(&client->dev, "Remote temperature may be "
- "wrong.\n");
-#endif
- }
- data->temp11[0] |= (newh << 8);
+ if (lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &oldh) == 0
+ && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0
+ && lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPH, &newh) == 0
+ && (newh == oldh
+ || lm90_read_reg(client, LM90_REG_R_REMOTE_TEMPL, &l) == 0))
+ data->temp11[0] = (newh << 8) | l;
- data->temp11[1] = (i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_LOWH) << 8) +
- i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_LOWL);
- data->temp11[2] = (i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_HIGHH) << 8) +
- i2c_smbus_read_byte_data(client,
- LM90_REG_R_REMOTE_HIGHL);
- data->alarms = i2c_smbus_read_byte_data(client,
- LM90_REG_R_STATUS);
+ if (lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &newh) == 0
+ && lm90_read_reg(client, LM90_REG_R_REMOTE_LOWL, &l) == 0)
+ data->temp11[1] = (newh << 8) | l;
+ if (lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &newh) == 0
+ && lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHL, &l) == 0)
+ data->temp11[2] = (newh << 8) | l;
+ lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms);
data->last_updated = jiffies;
data->valid = 1;
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index 647b7c7..7a4b3701 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -300,11 +300,10 @@
| I2C_FUNC_SMBUS_WORD_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct lm92_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct lm92_data));
/* Fill in enough client fields so that we can read from the chip,
which is required for identication */
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 16bf71f..6a82ffa 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -197,11 +197,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct max1619_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct max1619_data));
/* The common I2C client data is placed right before the
MAX1619-specific data. */
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index cf2a357..17f745a 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -754,9 +754,8 @@
const char *name = "pc87360";
int use_thermistors = 0;
- if (!(data = kmalloc(sizeof(struct pc87360_data), GFP_KERNEL)))
+ if (!(data = kzalloc(sizeof(struct pc87360_data), GFP_KERNEL)))
return -ENOMEM;
- memset(data, 0x00, sizeof(struct pc87360_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 21aa9a4..9c6cade 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -518,11 +518,10 @@
goto exit_release;
}
- if (!(data = kmalloc(sizeof(struct sis5595_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct sis5595_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_release;
}
- memset(data, 0, sizeof(struct sis5595_data));
new_client = &data->client;
new_client->addr = address;
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 7fe7157..2a3e21b 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -244,11 +244,10 @@
return -EBUSY;
}
- if (!(data = kmalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) {
err = -ENOMEM;
goto error_release;
}
- memset(data, 0x00, sizeof(struct smsc47b397_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -299,7 +298,7 @@
superio_enter();
id = superio_inb(SUPERIO_REG_DEVID);
- if (id != 0x6f) {
+ if ((id != 0x6f) && (id != 0x81)) {
superio_exit();
return -ENODEV;
}
@@ -310,8 +309,9 @@
*addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8)
| superio_inb(SUPERIO_REG_BASE_LSB);
- printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC "
- "(base address 0x%04x, revision %u)\n", *addr, rev);
+ printk(KERN_INFO "smsc47b397: found SMSC %s "
+ "(base address 0x%04x, revision %u)\n",
+ id == 0x81 ? "SCH5307-NS" : "LPC47B397-NC", *addr, rev);
superio_exit();
return 0;
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index c9cc683..5905c1a 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -3,7 +3,7 @@
for hardware monitoring
Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x,
- LPC47M15x and LPC47M192 Super-I/O chips.
+ LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips.
Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
@@ -356,6 +356,8 @@
* 0x5F) and LPC47B27x (device id 0x51) have fan control.
* The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
* can do much more besides (device id 0x60).
+ * The LPC47M997 is undocumented, but seems to be compatible with
+ * the LPC47M192, and has the same device id.
*/
if (val == 0x51)
printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
@@ -364,7 +366,8 @@
else if (val == 0x5F)
printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
else if (val == 0x60)
- printk(KERN_INFO "smsc47m1: Found SMSC LPC47M15x/LPC47M192\n");
+ printk(KERN_INFO "smsc47m1: Found SMSC "
+ "LPC47M15x/LPC47M192/LPC47M997\n");
else {
superio_exit();
return -ENODEV;
@@ -396,11 +399,10 @@
return -EBUSY;
}
- if (!(data = kmalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
err = -ENOMEM;
goto error_release;
}
- memset(data, 0x00, sizeof(struct smsc47m1_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 05ddc88e..6f696f8 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -44,7 +44,7 @@
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
-static unsigned short force_addr = 0;
+static unsigned short force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the sensors");
@@ -198,7 +198,7 @@
but the function is very linear in the useful range (0-80 deg C), so
we'll just use linear interpolation for 10-bit readings.) So, tempLUT
is the temp at via register values 0-255: */
-static const long tempLUT[] =
+static const s16 tempLUT[] =
{ -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
-503, -487, -471, -456, -442, -428, -414, -400, -387, -375,
-362, -350, -339, -327, -316, -305, -295, -285, -275, -265,
@@ -270,7 +270,7 @@
}
/* for 8-bit temperature hyst and over registers */
-#define TEMP_FROM_REG(val) (tempLUT[(val)] * 100)
+#define TEMP_FROM_REG(val) ((long)tempLUT[val] * 100)
/* for 10-bit temperature readings */
static inline long TEMP_FROM_REG10(u16 val)
@@ -589,10 +589,8 @@
u16 val;
/* 8231 requires multiple of 256, we enforce that on 686 as well */
- if (force_addr)
- address = force_addr & 0xFF00;
-
if (force_addr) {
+ address = force_addr & 0xFF00;
dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
address);
if (PCIBIOS_SUCCESSFUL !=
@@ -603,11 +601,17 @@
pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val))
return -ENODEV;
if (!(val & 0x0001)) {
- dev_warn(&adapter->dev, "enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
- val | 0x0001))
+ if (force_addr) {
+ dev_info(&adapter->dev, "enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
+ } else {
+ dev_warn(&adapter->dev, "sensors disabled - enable "
+ "with force_addr=0x%x\n", address);
return -ENODEV;
+ }
}
/* Reserve the ISA region */
@@ -617,11 +621,10 @@
return -ENODEV;
}
- if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct via686a_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_release;
}
- memset(data, 0, sizeof(struct via686a_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -708,7 +711,6 @@
return 0;
}
-/* Called when we have found a new VIA686A. Set limits, etc. */
static void via686a_init_client(struct i2c_client *client)
{
u8 reg;
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index b60efe8..eee22a5 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -105,7 +105,9 @@
* ISA constants
*/
-#define REGION_LENGTH 8
+#define REGION_ALIGNMENT ~7
+#define REGION_OFFSET 5
+#define REGION_LENGTH 2
#define ADDR_REG_OFFSET 5
#define DATA_REG_OFFSET 6
@@ -673,16 +675,16 @@
struct w83627ehf_data *data;
int i, err = 0;
- if (!request_region(address, REGION_LENGTH, w83627ehf_driver.name)) {
+ if (!request_region(address + REGION_OFFSET, REGION_LENGTH,
+ w83627ehf_driver.name)) {
err = -EBUSY;
goto exit;
}
- if (!(data = kmalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_release;
}
- memset(data, 0, sizeof(struct w83627ehf_data));
client = &data->client;
i2c_set_clientdata(client, data);
@@ -762,7 +764,7 @@
exit_free:
kfree(data);
exit_release:
- release_region(address, REGION_LENGTH);
+ release_region(address + REGION_OFFSET, REGION_LENGTH);
exit:
return err;
}
@@ -776,7 +778,7 @@
if ((err = i2c_detach_client(client)))
return err;
- release_region(client->addr, REGION_LENGTH);
+ release_region(client->addr + REGION_OFFSET, REGION_LENGTH);
kfree(data);
return 0;
@@ -807,7 +809,7 @@
superio_select(W83627EHF_LD_HWM);
val = (superio_inb(SIO_REG_ADDR) << 8)
| superio_inb(SIO_REG_ADDR + 1);
- *addr = val & ~(REGION_LENGTH - 1);
+ *addr = val & REGION_ALIGNMENT;
if (*addr == 0) {
superio_exit();
return -ENODEV;
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 3479dc5..70ef926 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -142,10 +142,14 @@
#define WINB_BASE_REG 0x60
/* Constants specified below */
-/* Length of ISA address segment */
-#define WINB_EXTENT 8
+/* Alignment of the base address */
+#define WINB_ALIGNMENT ~7
-/* Where are the ISA address/data registers relative to the base address */
+/* Offset & size of I/O region we are interested in */
+#define WINB_REGION_OFFSET 5
+#define WINB_REGION_SIZE 2
+
+/* Where are the sensors address/data registers relative to the base address */
#define W83781D_ADDR_REG_OFFSET 5
#define W83781D_DATA_REG_OFFSET 6
@@ -197,7 +201,6 @@
#define W83627HF_REG_PWM1 0x5A
#define W83627HF_REG_PWM2 0x5B
-#define W83627HF_REG_PWMCLK12 0x5C
#define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */
#define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */
@@ -981,7 +984,7 @@
superio_select(W83627HF_LD_HWM);
val = (superio_inb(WINB_BASE_REG) << 8) |
superio_inb(WINB_BASE_REG + 1);
- *addr = val & ~(WINB_EXTENT - 1);
+ *addr = val & WINB_ALIGNMENT;
if (*addr == 0 && force_addr == 0) {
superio_exit();
return -ENODEV;
@@ -1000,9 +1003,10 @@
const char *client_name = "";
if(force_addr)
- address = force_addr & ~(WINB_EXTENT - 1);
+ address = force_addr & WINB_ALIGNMENT;
- if (!request_region(address, WINB_EXTENT, w83627hf_driver.name)) {
+ if (!request_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE,
+ w83627hf_driver.name)) {
err = -EBUSY;
goto ERROR0;
}
@@ -1041,11 +1045,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access w83627hf_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR1;
}
- memset(data, 0, sizeof(struct w83627hf_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -1148,7 +1151,7 @@
ERROR2:
kfree(data);
ERROR1:
- release_region(address, WINB_EXTENT);
+ release_region(address + WINB_REGION_OFFSET, WINB_REGION_SIZE);
ERROR0:
return err;
}
@@ -1163,7 +1166,7 @@
if ((err = i2c_detach_client(client)))
return err;
- release_region(client->addr, WINB_EXTENT);
+ release_region(client->addr + WINB_REGION_OFFSET, WINB_REGION_SIZE);
kfree(data);
return 0;
@@ -1275,7 +1278,6 @@
return 0;
}
-/* Called when we have found a new W83781D. It should set limits, etc. */
static void w83627hf_init_client(struct i2c_client *client)
{
struct w83627hf_data *data = i2c_get_clientdata(client);
@@ -1369,12 +1371,6 @@
}
}
- if (type == w83627hf) {
- /* enable PWM2 control (can't hurt since PWM reg
- should have been reset to 0xff) */
- w83627hf_write_value(client, W83627HF_REG_PWMCLK12,
- 0x19);
- }
/* enable comparator mode for temp2 and temp3 so
alarm indication will work correctly */
i = w83627hf_read_value(client, W83781D_REG_IRQ);
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 4c43337..9265f32 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -889,12 +889,11 @@
const char *client_name = "";
struct w83781d_data *data = i2c_get_clientdata(new_client);
- data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[0])) {
err = -ENOMEM;
goto ERROR_SC_0;
}
- memset(data->lm75[0], 0x00, sizeof (struct i2c_client));
id = i2c_adapter_id(adapter);
@@ -919,13 +918,11 @@
}
if (kind != w83783s) {
-
- data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[1])) {
err = -ENOMEM;
goto ERROR_SC_1;
}
- memset(data->lm75[1], 0x0, sizeof(struct i2c_client));
if (force_subclients[0] == id &&
force_subclients[1] == address) {
@@ -1064,11 +1061,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access w83781d_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR1;
}
- memset(data, 0, sizeof(struct w83781d_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -1451,7 +1447,6 @@
return 0;
}
-/* Called when we have found a new W83781D. It should set limits, etc. */
static void
w83781d_init_client(struct i2c_client *client)
{
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index ba0c280..4be59db 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -1086,11 +1086,10 @@
int err;
struct i2c_client *sub_client;
- (*sub_cli) = sub_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ (*sub_cli) = sub_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(sub_client)) {
return -ENOMEM;
}
- memset(sub_client, 0x00, sizeof(struct i2c_client));
sub_client->addr = 0x48 + addr;
i2c_set_clientdata(sub_client, NULL);
sub_client->adapter = adapter;
@@ -1184,11 +1183,10 @@
client structure, even though we cannot fill it completely yet.
But it allows us to access w83792d_{read,write}_value. */
- if (!(data = kmalloc(sizeof(struct w83792d_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
- memset(data, 0, sizeof(struct w83792d_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -1429,7 +1427,6 @@
return 0;
}
-/* Called when we have found a new W83792D. It should set limits, etc. */
static void
w83792d_init_client(struct i2c_client *client)
{
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index 133e34a..f495b63 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -37,6 +37,7 @@
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
/* How many retries on register read error */
@@ -73,7 +74,7 @@
* The W83L785TS-S uses signed 8-bit values.
*/
-#define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000)
+#define TEMP_FROM_REG(val) ((val) * 1000)
/*
* Functions declaration
@@ -111,27 +112,24 @@
unsigned long last_updated; /* in jiffies */
/* registers values */
- u8 temp, temp_over;
+ s8 temp[2]; /* 0: input
+ 1: critical limit */
};
/*
* Sysfs stuff
*/
-static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+ char *buf)
{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct w83l785ts_data *data = w83l785ts_update_device(dev);
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp));
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
}
-static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct w83l785ts_data *data = w83l785ts_update_device(dev);
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over));
-}
-
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
-static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_over, NULL);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1);
/*
* Real code
@@ -158,12 +156,10 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
- if (!(data = kmalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct w83l785ts_data));
-
/* The common I2C client data is placed right before the
* W83L785TS-specific data. */
@@ -228,7 +224,7 @@
init_MUTEX(&data->update_lock);
/* Default values in case the first read fails (unlikely). */
- data->temp_over = data->temp = 0;
+ data->temp[1] = data->temp[0] = 0;
/* Tell the I2C layer a new client has arrived. */
if ((err = i2c_attach_client(new_client)))
@@ -246,8 +242,10 @@
goto exit_detach;
}
- device_create_file(&new_client->dev, &dev_attr_temp1_input);
- device_create_file(&new_client->dev, &dev_attr_temp1_max);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp1_input.dev_attr);
+ device_create_file(&new_client->dev,
+ &sensor_dev_attr_temp1_max.dev_attr);
return 0;
@@ -305,10 +303,10 @@
if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) {
dev_dbg(&client->dev, "Updating w83l785ts data.\n");
- data->temp = w83l785ts_read_value(client,
- W83L785TS_REG_TEMP, data->temp);
- data->temp_over = w83l785ts_read_value(client,
- W83L785TS_REG_TEMP_OVER, data->temp_over);
+ data->temp[0] = w83l785ts_read_value(client,
+ W83L785TS_REG_TEMP, data->temp[0]);
+ data->temp[1] = w83l785ts_read_value(client,
+ W83L785TS_REG_TEMP_OVER, data->temp[1]);
data->last_updated = jiffies;
data->valid = 1;
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index beb10ed..82946ac 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -34,7 +34,7 @@
#define DEB2(fmt, args...) do { if (i2c_debug>=2) printk(fmt, ## args); } while(0)
#define DEB3(fmt, args...) do { if (i2c_debug>=3) printk(fmt, ## args); } while(0)
-static int i2c_debug=0;
+static int i2c_debug;
#define pca_outw(adap, reg, val) adap->write_byte(adap, reg, val)
#define pca_inw(adap, reg) adap->read_byte(adap, reg)
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
index 8ed5ad1..938848a 100644
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ b/drivers/i2c/algos/i2c-algo-sibyte.c
@@ -42,7 +42,7 @@
/* module parameters:
*/
-static int bit_scan=0; /* have a look at what's hanging 'round */
+static int bit_scan; /* have a look at what's hanging 'round */
static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 3badfec..4010fe9 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -135,11 +135,12 @@
help
If you say yes to this option, support will be included for the Intel
810/815 family of mainboard I2C interfaces. Specifically, the
- following versions of the chipset is supported:
+ following versions of the chipset are supported:
i810AA
i810AB
i810E
i815
+ i845G
This driver can also be built as a module. If so, the module
will be called i2c-i810.
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index f021acd..ba90f51 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -134,7 +134,7 @@
/* -> Read = 1 */
#define ALI1535_SMBIO_EN 0x04 /* SMB I/O Space enable */
-
+static struct pci_driver ali1535_driver;
static unsigned short ali1535_smba;
static DECLARE_MUTEX(i2c_ali1535_sem);
@@ -162,7 +162,8 @@
goto exit;
}
- if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, "ali1535-smb")) {
+ if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE,
+ ali1535_driver.name)) {
dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
ali1535_smba);
goto exit;
@@ -480,7 +481,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id ali1535_ids[] = {
@@ -513,6 +513,7 @@
}
static struct pci_driver ali1535_driver = {
+ .owner = THIS_MODULE,
.name = "ali1535_smbus",
.id_table = ali1535_ids,
.probe = ali1535_probe,
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 8694750..f1a62d8 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -60,6 +60,7 @@
#define HST_CNTL2_SIZEMASK 0x38
+static struct pci_driver ali1563_pci_driver;
static unsigned short ali1563_smba;
static int ali1563_transaction(struct i2c_adapter * a, int size)
@@ -350,7 +351,8 @@
dev_warn(&dev->dev,"ali1563_smba Uninitialized\n");
goto Err;
}
- if (!request_region(ali1563_smba,ALI1563_SMB_IOSIZE,"i2c-ali1563")) {
+ if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
+ ali1563_pci_driver.name)) {
dev_warn(&dev->dev,"Could not allocate I/O space");
goto Err;
}
@@ -406,7 +408,8 @@
MODULE_DEVICE_TABLE (pci, ali1563_id_table);
static struct pci_driver ali1563_pci_driver = {
- .name = "ali1563_i2c",
+ .owner = THIS_MODULE,
+ .name = "ali1563_smbus",
.id_table = ali1563_id_table,
.probe = ali1563_probe,
.remove = __devexit_p(ali1563_remove),
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index b3f50bf..400b08e 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -125,12 +125,13 @@
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
-static u16 force_addr = 0;
+static u16 force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the i2c controller");
-static unsigned short ali15x3_smba = 0;
+static struct pci_driver ali15x3_driver;
+static unsigned short ali15x3_smba;
static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
{
@@ -166,7 +167,8 @@
if(force_addr)
ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1);
- if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, "ali15x3-smb")) {
+ if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE,
+ ali15x3_driver.name)) {
dev_err(&ALI15X3_dev->dev,
"ALI15X3_smb region 0x%x already in use!\n",
ali15x3_smba);
@@ -470,7 +472,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id ali15x3_ids[] = {
@@ -503,6 +504,7 @@
}
static struct pci_driver ali15x3_driver = {
+ .owner = THIS_MODULE,
.name = "ali15x3_smbus",
.id_table = ali15x3_ids,
.probe = ali15x3_probe,
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 4e553e8..f51ab65 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -169,12 +169,12 @@
init_MUTEX(&amd756_lock);
/* Define the 5 virtual adapters and algorithms structures */
- if (!(s4882_adapter = kmalloc(5 * sizeof(struct i2c_adapter),
+ if (!(s4882_adapter = kzalloc(5 * sizeof(struct i2c_adapter),
GFP_KERNEL))) {
error = -ENOMEM;
goto ERROR1;
}
- if (!(s4882_algo = kmalloc(5 * sizeof(struct i2c_algorithm),
+ if (!(s4882_algo = kzalloc(5 * sizeof(struct i2c_algorithm),
GFP_KERNEL))) {
error = -ENOMEM;
goto ERROR2;
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 6ad0603..de035d1 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -85,8 +85,8 @@
#define AMD756_PROCESS_CALL 0x04
#define AMD756_BLOCK_DATA 0x05
-
-static unsigned short amd756_ioport = 0;
+static struct pci_driver amd756_driver;
+static unsigned short amd756_ioport;
/*
SMBUS event = I/O 28-29 bit 11
@@ -303,7 +303,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 };
@@ -365,7 +364,7 @@
amd756_ioport += SMB_ADDR_OFFSET;
}
- if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) {
+ if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
amd756_ioport);
return -ENODEV;
@@ -402,6 +401,7 @@
}
static struct pci_driver amd756_driver = {
+ .owner = THIS_MODULE,
.name = "amd756_smbus",
.id_table = amd756_ids,
.probe = amd756_probe,
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 45ea24b..f3b79a6 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -30,6 +30,8 @@
int size;
};
+static struct pci_driver amd8111_driver;
+
/*
* AMD PCI control registers definitions.
*/
@@ -242,7 +244,6 @@
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
- protocol |= pec;
len = min_t(u8, data->block[0], 31);
amd_ec_write(smbus, AMD_SMB_CMD, command);
amd_ec_write(smbus, AMD_SMB_BCNT, len);
@@ -252,13 +253,6 @@
read_write = I2C_SMBUS_READ;
break;
- case I2C_SMBUS_WORD_DATA_PEC:
- case I2C_SMBUS_BLOCK_DATA_PEC:
- case I2C_SMBUS_PROC_CALL_PEC:
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
- dev_warn(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
- return -1;
-
default:
dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
return -1;
@@ -343,16 +337,15 @@
if (~pci_resource_flags(dev, 0) & IORESOURCE_IO)
return -ENODEV;
- smbus = kmalloc(sizeof(struct amd_smbus), GFP_KERNEL);
+ smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL);
if (!smbus)
return -ENOMEM;
- memset(smbus, 0, sizeof(struct amd_smbus));
smbus->dev = dev;
smbus->base = pci_resource_start(dev, 0);
smbus->size = pci_resource_len(dev, 0);
- if (!request_region(smbus->base, smbus->size, "amd8111 SMBus 2.0"))
+ if (!request_region(smbus->base, smbus->size, amd8111_driver.name))
goto out_kfree;
smbus->adapter.owner = THIS_MODULE;
@@ -391,6 +384,7 @@
}
static struct pci_driver amd8111_driver = {
+ .owner = THIS_MODULE,
.name = "amd8111_smbus2",
.id_table = amd8111_ids,
.probe = amd8111_probe,
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 6930b66..59f8308 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -22,7 +22,7 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
Frodo Looijaard <frodol@dds.nl> */
-/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
+/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
for Alpha Processor Inc. UP-2000(+) boards */
#include <linux/kernel.h>
@@ -46,12 +46,14 @@
#define DEFAULT_BASE 0x330
static int base;
+static u8 __iomem *base_iomem;
+
static int irq;
static int clock = 0x1c;
static int own = 0x55;
static int mmapped;
-/* vdovikin: removed static struct i2c_pcf_isa gpi; code -
+/* vdovikin: removed static struct i2c_pcf_isa gpi; code -
this module in real supports only one device, due to missing arguments
in some functions, called from the algo-pcf module. Sometimes it's
need to be rewriten - but for now just remove this for simpler reading */
@@ -60,40 +62,33 @@
static int pcf_pending;
static spinlock_t lock;
+static struct i2c_adapter pcf_isa_ops;
+
/* ----- local functions ---------------------------------------------- */
static void pcf_isa_setbyte(void *data, int ctl, int val)
{
- int address = ctl ? (base + 1) : base;
+ u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
/* enable irq if any specified for serial operation */
if (ctl && irq && (val & I2C_PCF_ESO)) {
val |= I2C_PCF_ENI;
}
- pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255);
-
- switch (mmapped) {
- case 0: /* regular I/O */
- outb(val, address);
- break;
- case 2: /* double mapped I/O needed for UP2000 board,
- I don't know why this... */
- writeb(val, (void *)address);
- /* fall */
- case 1: /* memory mapped I/O */
- writeb(val, (void *)address);
- break;
- }
+ pr_debug("%s: Write %p 0x%02X\n", pcf_isa_ops.name, address, val);
+ iowrite8(val, address);
+#ifdef __alpha__
+ /* API UP2000 needs some hardware fudging to make the write stick */
+ iowrite8(val, address);
+#endif
}
static int pcf_isa_getbyte(void *data, int ctl)
{
- int address = ctl ? (base + 1) : base;
- int val = mmapped ? readb((void *)address) : inb(address);
+ u8 __iomem *address = ctl ? (base_iomem + 1) : base_iomem;
+ int val = ioread8(address);
- pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val);
-
+ pr_debug("%s: Read %p 0x%02X\n", pcf_isa_ops.name, address, val);
return (val);
}
@@ -149,16 +144,40 @@
{
spin_lock_init(&lock);
if (!mmapped) {
- if (!request_region(base, 2, "i2c (isa bus adapter)")) {
- printk(KERN_ERR
- "i2c-elektor: requested I/O region (0x%X:2) "
- "is in use.\n", base);
+ if (!request_region(base, 2, pcf_isa_ops.name)) {
+ printk(KERN_ERR "%s: requested I/O region (%#x:2) is "
+ "in use\n", pcf_isa_ops.name, base);
+ return -ENODEV;
+ }
+ base_iomem = ioport_map(base, 2);
+ if (!base_iomem) {
+ printk(KERN_ERR "%s: remap of I/O region %#x failed\n",
+ pcf_isa_ops.name, base);
+ release_region(base, 2);
+ return -ENODEV;
+ }
+ } else {
+ if (!request_mem_region(base, 2, pcf_isa_ops.name)) {
+ printk(KERN_ERR "%s: requested memory region (%#x:2) "
+ "is in use\n", pcf_isa_ops.name, base);
+ return -ENODEV;
+ }
+ base_iomem = ioremap(base, 2);
+ if (base_iomem == NULL) {
+ printk(KERN_ERR "%s: remap of memory region %#x "
+ "failed\n", pcf_isa_ops.name, base);
+ release_mem_region(base, 2);
return -ENODEV;
}
}
+ pr_debug("%s: registers %#x remapped to %p\n", pcf_isa_ops.name, base,
+ base_iomem);
+
if (irq > 0) {
- if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) {
- printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq);
+ if (request_irq(irq, pcf_isa_handler, 0, pcf_isa_ops.name,
+ NULL) < 0) {
+ printk(KERN_ERR "%s: Request irq%d failed\n",
+ pcf_isa_ops.name, irq);
irq = 0;
} else
enable_irq(irq);
@@ -186,47 +205,49 @@
.class = I2C_CLASS_HWMON,
.id = I2C_HW_P_ELEK,
.algo_data = &pcf_isa_data,
- .name = "PCF8584 ISA adapter",
+ .name = "i2c-elektor",
};
-static int __init i2c_pcfisa_init(void)
+static int __init i2c_pcfisa_init(void)
{
#ifdef __alpha__
- /* check to see we have memory mapped PCF8584 connected to the
+ /* check to see we have memory mapped PCF8584 connected to the
Cypress cy82c693 PCI-ISA bridge as on UP2000 board */
if (base == 0) {
struct pci_dev *cy693_dev;
-
- cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ,
+
+ cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ,
PCI_DEVICE_ID_CONTAQ_82C693, NULL);
if (cy693_dev) {
- char config;
+ unsigned char config;
/* yeap, we've found cypress, let's check config */
if (!pci_read_config_byte(cy693_dev, 0x47, &config)) {
-
- pr_debug("i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config);
+
+ pr_debug("%s: found cy82c693, config "
+ "register 0x47 = 0x%02x\n",
+ pcf_isa_ops.name, config);
/* UP2000 board has this register set to 0xe1,
- but the most significant bit as seems can be
+ but the most significant bit as seems can be
reset during the proper initialisation
- sequence if guys from API decides to do that
- (so, we can even enable Tsunami Pchip
- window for the upper 1 Gb) */
+ sequence if guys from API decides to do that
+ (so, we can even enable Tsunami Pchip
+ window for the upper 1 Gb) */
/* so just check for ROMCS at 0xe0000,
- ROMCS enabled for writes
+ ROMCS enabled for writes
and external XD Bus buffer in use. */
if ((config & 0x7f) == 0x61) {
/* seems to be UP2000 like board */
base = 0xe0000;
- /* I don't know why we need to
- write twice */
- mmapped = 2;
- /* UP2000 drives ISA with
+ mmapped = 1;
+ /* UP2000 drives ISA with
8.25 MHz (PCI/4) clock
(this can be read from cypress) */
clock = I2C_PCF_CLK | I2C_PCF_TRNS90;
- printk(KERN_INFO "i2c-elektor: found API UP2000 like board, will probe PCF8584 later.\n");
+ pr_info("%s: found API UP2000 like "
+ "board, will probe PCF8584 "
+ "later\n", pcf_isa_ops.name);
}
}
pci_dev_put(cy693_dev);
@@ -236,12 +257,11 @@
/* sanity checks for mmapped I/O */
if (mmapped && base < 0xc8000) {
- printk(KERN_ERR "i2c-elektor: incorrect base address (0x%0X) specified for mmapped I/O.\n", base);
+ printk(KERN_ERR "%s: incorrect base address (%#x) specified "
+ "for mmapped I/O\n", pcf_isa_ops.name, base);
return -ENODEV;
}
- printk(KERN_INFO "i2c-elektor: i2c pcf8584-isa adapter driver\n");
-
if (base == 0) {
base = DEFAULT_BASE;
}
@@ -251,8 +271,8 @@
return -ENODEV;
if (i2c_pcf_add_bus(&pcf_isa_ops) < 0)
goto fail;
-
- printk(KERN_ERR "i2c-elektor: found device at %#x.\n", base);
+
+ dev_info(&pcf_isa_ops.dev, "found device at %#x\n", base);
return 0;
@@ -262,8 +282,13 @@
free_irq(irq, NULL);
}
- if (!mmapped)
- release_region(base , 2);
+ if (!mmapped) {
+ ioport_unmap(base_iomem);
+ release_region(base, 2);
+ } else {
+ iounmap(base_iomem);
+ release_mem_region(base, 2);
+ }
return -ENODEV;
}
@@ -276,8 +301,13 @@
free_irq(irq, NULL);
}
- if (!mmapped)
- release_region(base , 2);
+ if (!mmapped) {
+ ioport_unmap(base_iomem);
+ release_region(base, 2);
+ } else {
+ iounmap(base_iomem);
+ release_mem_region(base, 2);
+ }
}
MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>");
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index e0cb3b0..1b5354e 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -155,6 +155,7 @@
static struct pci_driver hydra_driver = {
+ .owner = THIS_MODULE,
.name = "hydra_smbus",
.id_table = hydra_ids,
.probe = hydra_probe,
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 709beab..4f631950 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -52,10 +52,6 @@
#include <linux/i2c.h>
#include <asm/io.h>
-#ifdef I2C_FUNC_SMBUS_BLOCK_DATA_PEC
-#define HAVE_PEC
-#endif
-
/* I801 SMBus address offsets */
#define SMBHSTSTS (0 + i801_smba)
#define SMBHSTCNT (2 + i801_smba)
@@ -106,10 +102,11 @@
"EXTREMELY DANGEROUS!");
static int i801_transaction(void);
-static int i801_block_transaction(union i2c_smbus_data *data,
- char read_write, int command);
+static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+ int command, int hwpec);
static unsigned short i801_smba;
+static struct pci_driver i801_driver;
static struct pci_dev *I801_dev;
static int isich4;
@@ -143,7 +140,7 @@
}
}
- if (!request_region(i801_smba, (isich4 ? 16 : 8), "i801-smbus")) {
+ if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) {
dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n",
i801_smba);
error_return = -EBUSY;
@@ -252,7 +249,7 @@
/* All-inclusive block transaction function */
static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command)
+ int command, int hwpec)
{
int i, len;
int smbcmd;
@@ -391,8 +388,7 @@
goto END;
}
-#ifdef HAVE_PEC
- if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) {
+ if (hwpec) {
/* wait for INTR bit as advised by Intel */
timeout = 0;
do {
@@ -406,7 +402,6 @@
}
outb_p(temp, SMBHSTSTS);
}
-#endif
result = 0;
END:
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
@@ -421,14 +416,13 @@
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data * data)
{
- int hwpec = 0;
+ int hwpec;
int block = 0;
int ret, xact = 0;
-#ifdef HAVE_PEC
- if(isich4)
- hwpec = (flags & I2C_CLIENT_PEC) != 0;
-#endif
+ hwpec = isich4 && (flags & I2C_CLIENT_PEC)
+ && size != I2C_SMBUS_QUICK
+ && size != I2C_SMBUS_I2C_BLOCK_DATA;
switch (size) {
case I2C_SMBUS_QUICK:
@@ -463,11 +457,6 @@
break;
case I2C_SMBUS_BLOCK_DATA:
case I2C_SMBUS_I2C_BLOCK_DATA:
-#ifdef HAVE_PEC
- case I2C_SMBUS_BLOCK_DATA_PEC:
- if(hwpec && size == I2C_SMBUS_BLOCK_DATA)
- size = I2C_SMBUS_BLOCK_DATA_PEC;
-#endif
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
SMBHSTADD);
outb_p(command, SMBHSTCMD);
@@ -479,27 +468,18 @@
return -1;
}
-#ifdef HAVE_PEC
- if(isich4 && hwpec) {
- if(size != I2C_SMBUS_QUICK &&
- size != I2C_SMBUS_I2C_BLOCK_DATA)
- outb_p(1, SMBAUXCTL); /* enable HW PEC */
- }
-#endif
+ if (hwpec)
+ outb_p(1, SMBAUXCTL); /* enable hardware PEC */
+
if(block)
- ret = i801_block_transaction(data, read_write, size);
+ ret = i801_block_transaction(data, read_write, size, hwpec);
else {
outb_p(xact | ENABLE_INT9, SMBHSTCNT);
ret = i801_transaction();
}
-#ifdef HAVE_PEC
- if(isich4 && hwpec) {
- if(size != I2C_SMBUS_QUICK &&
- size != I2C_SMBUS_I2C_BLOCK_DATA)
- outb_p(0, SMBAUXCTL);
- }
-#endif
+ if (hwpec)
+ outb_p(0, SMBAUXCTL); /* disable hardware PEC */
if(block)
return ret;
@@ -526,12 +506,7 @@
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK
-#ifdef HAVE_PEC
- | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC |
- I2C_FUNC_SMBUS_HWPEC_CALC
- : 0)
-#endif
- ;
+ | (isich4 ? I2C_FUNC_SMBUS_HWPEC_CALC : 0);
}
static struct i2c_algorithm smbus_algorithm = {
@@ -543,7 +518,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id i801_ids[] = {
@@ -586,6 +560,7 @@
}
static struct pci_driver i801_driver = {
+ .owner = THIS_MODULE,
.name = "i801_smbus",
.id_table = i801_ids,
.probe = i801_probe,
diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c
index 0ff7016..52bc305 100644
--- a/drivers/i2c/busses/i2c-i810.c
+++ b/drivers/i2c/busses/i2c-i810.c
@@ -32,6 +32,7 @@
i810AB 7123
i810E 7125
i815 1132
+ i845G 2562
*/
#include <linux/kernel.h>
@@ -232,6 +233,7 @@
}
static struct pci_driver i810_driver = {
+ .owner = THIS_MODULE,
.name = "i810_smbus",
.id_table = i810_ids,
.probe = i810_probe,
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index a3ed959..1a58725 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -672,13 +672,12 @@
printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
ocp->def->index);
- if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){
+ if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) {
printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n",
ocp->def->index);
return -ENOMEM;
}
- memset(dev, 0, sizeof(*dev));
dev->idx = ocp->def->index;
ocp_set_drvdata(ocp, dev);
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 7bd9102..9888fae1 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -43,7 +43,7 @@
#include "i2c-iop3xx.h"
/* global unit counter */
-static int i2c_id = 0;
+static int i2c_id;
static inline unsigned char
iic_cook_addr(struct i2c_msg *msg)
@@ -440,19 +440,17 @@
struct i2c_adapter *new_adapter;
struct i2c_algo_iop3xx_data *adapter_data;
- new_adapter = kmalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+ new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
if (!new_adapter) {
ret = -ENOMEM;
goto out;
}
- memset((void*)new_adapter, 0, sizeof(*new_adapter));
- adapter_data = kmalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
+ adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL);
if (!adapter_data) {
ret = -ENOMEM;
goto free_adapter;
}
- memset((void*)adapter_data, 0, sizeof(*adapter_data));
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
@@ -525,6 +523,7 @@
static struct device_driver iop3xx_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "IOP3xx-I2C",
.bus = &platform_bus_type,
.probe = iop3xx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
index bdc6806..4fdc024 100644
--- a/drivers/i2c/busses/i2c-isa.c
+++ b/drivers/i2c/busses/i2c-isa.c
@@ -92,6 +92,7 @@
/* Add the driver to the list of i2c drivers in the driver core */
driver->driver.name = driver->name;
+ driver->driver.owner = driver->owner;
driver->driver.bus = &i2c_bus_type;
driver->driver.probe = i2c_isa_device_probe;
driver->driver.remove = i2c_isa_device_remove;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 1956af3..42016ee 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -36,6 +36,8 @@
#include <asm/hardware.h> /* Pick up IXP2000-specific bits */
#include <asm/arch/gpio.h>
+static struct device_driver ixp2000_i2c_driver;
+
static inline int ixp2000_scl_pin(void *data)
{
return ((struct ixp2000_i2c_pins*)data)->scl_pin;
@@ -104,11 +106,10 @@
struct platform_device *plat_dev = to_platform_device(dev);
struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data;
struct ixp2000_i2c_data *drv_data =
- kmalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
+ kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
if (!drv_data)
return -ENOMEM;
- memzero(drv_data, sizeof(*drv_data));
drv_data->gpio_pins = gpio;
drv_data->algo_data.data = gpio;
@@ -121,6 +122,8 @@
drv_data->algo_data.timeout = 100;
drv_data->adapter.id = I2C_HW_B_IXP2000,
+ strlcpy(drv_data->adapter.name, ixp2000_i2c_driver.name,
+ I2C_NAME_SIZE);
drv_data->adapter.algo_data = &drv_data->algo_data,
drv_data->adapter.dev.parent = &plat_dev->dev;
@@ -142,6 +145,7 @@
}
static struct device_driver ixp2000_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "IXP2000-I2C",
.bus = &platform_bus_type,
.probe = ixp2000_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index f6f5ca3..69303ab 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -35,6 +35,8 @@
#include <asm/hardware.h> /* Pick up IXP4xx-specific bits */
+static struct device_driver ixp4xx_i2c_driver;
+
static inline int ixp4xx_scl_pin(void *data)
{
return ((struct ixp4xx_i2c_pins*)data)->scl_pin;
@@ -105,12 +107,11 @@
struct platform_device *plat_dev = to_platform_device(dev);
struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data;
struct ixp4xx_i2c_data *drv_data =
- kmalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL);
+ kzalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL);
if(!drv_data)
return -ENOMEM;
- memzero(drv_data, sizeof(struct ixp4xx_i2c_data));
drv_data->gpio_pins = gpio;
/*
@@ -129,6 +130,8 @@
drv_data->algo_data.timeout = 100;
drv_data->adapter.id = I2C_HW_B_IXP4XX;
+ strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.name,
+ I2C_NAME_SIZE);
drv_data->adapter.algo_data = &drv_data->algo_data;
drv_data->adapter.dev.parent = &plat_dev->dev;
@@ -151,6 +154,7 @@
}
static struct device_driver ixp4xx_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "IXP4XX-I2C",
.bus = &platform_bus_type,
.probe = ixp4xx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c
index eff5896..d61f748 100644
--- a/drivers/i2c/busses/i2c-keywest.c
+++ b/drivers/i2c/busses/i2c-keywest.c
@@ -535,13 +535,12 @@
tsize = sizeof(struct keywest_iface) +
(sizeof(struct keywest_chan) + 4) * nchan;
- iface = (struct keywest_iface *) kmalloc(tsize, GFP_KERNEL);
+ iface = kzalloc(tsize, GFP_KERNEL);
if (iface == NULL) {
printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n");
pmac_low_i2c_unlock(np);
return -ENOMEM;
}
- memset(iface, 0, tsize);
spin_lock_init(&iface->lock);
init_completion(&iface->complete);
iface->node = of_node_get(np);
@@ -716,6 +715,7 @@
static struct macio_driver i2c_keywest_macio_driver =
{
+ .owner = THIS_MODULE,
.name = "i2c-keywest",
.match_table = i2c_keywest_match,
.probe = create_iface_macio,
@@ -724,6 +724,7 @@
static struct of_platform_driver i2c_keywest_of_platform_driver =
{
+ .owner = THIS_MODULE,
.name = "i2c-keywest",
.match_table = i2c_keywest_match,
.probe = create_iface_of_platform,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index f065583..8491633 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -296,10 +296,9 @@
pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
- if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) {
+ if (!(i2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) {
return -ENOMEM;
}
- memset(i2c, 0, sizeof(*i2c));
i2c->irq = platform_get_irq(pdev, 0);
i2c->flags = pdata->device_flags;
@@ -361,6 +360,7 @@
/* Structure for a device driver */
static struct device_driver fsl_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "fsl-i2c",
.bus = &platform_bus_type,
.probe = fsl_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 99abca4..d0d2a6f 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -500,13 +500,10 @@
if ((pd->id != 0) || !pdata)
return -ENODEV;
- drv_data = kmalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
-
+ drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
if (!drv_data)
return -ENOMEM;
- memset(drv_data, 0, sizeof(struct mv64xxx_i2c_data));
-
if (mv64xxx_i2c_map_regs(pd, drv_data)) {
rc = -ENODEV;
goto exit_kfree;
@@ -570,6 +567,7 @@
}
static struct device_driver mv64xxx_i2c_driver = {
+ .owner = THIS_MODULE,
.name = MV64XXX_I2C_CTLR_NAME,
.bus = &platform_bus_type,
.probe = mv64xxx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index fe9c0f4..fd26036 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -97,6 +97,7 @@
#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a
#define NVIDIA_SMB_PRTCL_PEC 0x80
+static struct pci_driver nforce2_driver;
static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
@@ -113,7 +114,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
/* Return -1 on error. See smbus.h for more information */
@@ -188,13 +188,6 @@
dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
return -1;
- case I2C_SMBUS_WORD_DATA_PEC:
- case I2C_SMBUS_BLOCK_DATA_PEC:
- case I2C_SMBUS_PROC_CALL_PEC:
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
- dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
- return -1;
-
default:
dev_err(&adap->dev, "Unsupported transaction %d\n", size);
return -1;
@@ -285,7 +278,7 @@
smbus->base = iobase & 0xfffc;
smbus->size = 8;
- if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) {
+ if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
smbus->base, smbus->base+smbus->size-1, name);
return -1;
@@ -313,10 +306,8 @@
int res1, res2;
/* we support 2 SMBus adapters */
- if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus),
- GFP_KERNEL)))
+ if (!(smbuses = kzalloc(2*sizeof(struct nforce2_smbus), GFP_KERNEL)))
return -ENOMEM;
- memset (smbuses, 0, 2*sizeof(struct nforce2_smbus));
pci_set_drvdata(dev, smbuses);
/* SMBus adapter 1 */
@@ -356,6 +347,7 @@
}
static struct pci_driver nforce2_driver = {
+ .owner = THIS_MODULE,
.name = "nForce2_smbus",
.id_table = nforce2_ids,
.probe = nforce2_probe,
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 71a2502..2854d85 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -155,12 +155,11 @@
{
struct i2c_par *adapter;
- adapter = kmalloc(sizeof(struct i2c_par), GFP_KERNEL);
+ adapter = kzalloc(sizeof(struct i2c_par), GFP_KERNEL);
if (adapter == NULL) {
- printk(KERN_ERR "i2c-parport: Failed to kmalloc\n");
+ printk(KERN_ERR "i2c-parport: Failed to kzalloc\n");
return;
}
- memset(adapter, 0x00, sizeof(struct i2c_par));
pr_debug("i2c-parport: attaching to %s\n", port->name);
adapter->pdev = parport_register_device(port, "i2c-parport",
@@ -232,7 +231,7 @@
}
}
-static struct parport_driver i2c_driver = {
+static struct parport_driver i2c_parport_driver = {
.name = "i2c-parport",
.attach = i2c_parport_attach,
.detach = i2c_parport_detach,
@@ -250,12 +249,12 @@
type = 0;
}
- return parport_register_driver(&i2c_driver);
+ return parport_register_driver(&i2c_parport_driver);
}
static void __exit i2c_parport_exit(void)
{
- parport_unregister_driver(&i2c_driver);
+ parport_unregister_driver(&i2c_parport_driver);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 6d48a4d..7d63eec 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -90,13 +90,13 @@
/* If force is set to anything different from 0, we forcibly enable the
PIIX4. DANGEROUS! */
-static int force = 0;
+static int force;
module_param (force, int, 0);
MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
/* If force_addr is set to anything different from 0, we forcibly enable
the PIIX4 at the given address. VERY DANGEROUS! */
-static int force_addr = 0;
+static int force_addr;
module_param (force_addr, int, 0);
MODULE_PARM_DESC(force_addr,
"Forcibly enable the PIIX4 at the given address. "
@@ -104,14 +104,15 @@
/* If fix_hstcfg is set to anything different from 0, we reset one of the
registers to be a valid value. */
-static int fix_hstcfg = 0;
+static int fix_hstcfg;
module_param (fix_hstcfg, int, 0);
MODULE_PARM_DESC(fix_hstcfg,
"Fix config register. Needed on some boards (Force CPCI735).");
static int piix4_transaction(void);
-static unsigned short piix4_smba = 0;
+static unsigned short piix4_smba;
+static struct pci_driver piix4_driver;
static struct i2c_adapter piix4_adapter;
static struct dmi_system_id __devinitdata piix4_dmi_table[] = {
@@ -157,7 +158,7 @@
}
}
- if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) {
+ if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n",
piix4_smba);
return -ENODEV;
@@ -407,7 +408,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id piix4_ids[] = {
@@ -462,6 +462,7 @@
}
static struct pci_driver piix4_driver = {
+ .owner = THIS_MODULE,
.name = "piix4_smbus",
.id_table = piix4_ids,
.probe = piix4_probe,
diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c
index 8a9f564..bfefe7f 100644
--- a/drivers/i2c/busses/i2c-pmac-smu.c
+++ b/drivers/i2c/busses/i2c-pmac-smu.c
@@ -211,12 +211,11 @@
}
busid = *reg;
- iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL);
+ iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL);
if (iface == NULL) {
printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
return -ENOMEM;
}
- memset(iface, 0, sizeof(struct smu_iface));
init_completion(&iface->complete);
iface->busid = busid;
diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c
index 83fd16d..42cb1d8 100644
--- a/drivers/i2c/busses/i2c-prosavage.c
+++ b/drivers/i2c/busses/i2c-prosavage.c
@@ -83,11 +83,6 @@
/*
* i2c configuration
*/
-#ifndef I2C_HW_B_S3VIA
-#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */
-#endif
-
-/* delays */
#define CYCLE_DELAY 10
#define TIMEOUT (HZ / 2)
@@ -241,14 +236,12 @@
struct s_i2c_chip *chip;
struct s_i2c_bus *bus;
- pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
+ pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL));
chip = (struct s_i2c_chip *)pci_get_drvdata(dev);
if (chip == NULL) {
return -ENOMEM;
}
- memset(chip, 0, sizeof(struct s_i2c_chip));
-
base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK;
len = dev->resource[0].end - base + 1;
chip->mmio = ioremap_nocache(base, len);
@@ -308,6 +301,7 @@
MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl);
static struct pci_driver prosavage_driver = {
+ .owner = THIS_MODULE,
.name = "prosavage_smbus",
.id_table = prosavage_pci_tbl,
.probe = prosavage_probe,
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 73a092f..6ced28e 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -879,14 +879,12 @@
}
#ifdef CONFIG_PM
-static int s3c24xx_i2c_resume(struct device *dev, u32 level)
+static int s3c24xx_i2c_resume(struct device *dev)
{
struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
-
- if (i2c != NULL && level == RESUME_ENABLE) {
- dev_dbg(dev, "resume: level %d\n", level);
+
+ if (i2c != NULL)
s3c24xx_i2c_init(i2c);
- }
return 0;
}
@@ -898,6 +896,7 @@
/* device driver for platform bus bits */
static struct device_driver s3c2410_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "s3c2410-i2c",
.bus = &platform_bus_type,
.probe = s3c24xx_i2c_probe,
@@ -906,6 +905,7 @@
};
static struct device_driver s3c2440_i2c_driver = {
+ .owner = THIS_MODULE,
.name = "s3c2440-i2c",
.bus = &platform_bus_type,
.probe = s3c24xx_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
index 0c85182..aebe87b 100644
--- a/drivers/i2c/busses/i2c-savage4.c
+++ b/drivers/i2c/busses/i2c-savage4.c
@@ -179,6 +179,7 @@
}
static struct pci_driver savage4_driver = {
+ .owner = THIS_MODULE,
.name = "savage4_smbus",
.id_table = savage4_ids,
.probe = savage4_probe,
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 080318d..3ad27c3 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -123,11 +123,12 @@
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
-static u16 force_addr = 0;
+static u16 force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller");
-static unsigned short sis5595_base = 0;
+static struct pci_driver sis5595_driver;
+static unsigned short sis5595_base;
static u8 sis5595_read(u8 reg)
{
@@ -172,7 +173,8 @@
/* NB: We grab just the two SMBus registers here, but this may still
* interfere with ACPI :-( */
- if (!request_region(sis5595_base + SMB_INDEX, 2, "sis5595-smbus")) {
+ if (!request_region(sis5595_base + SMB_INDEX, 2,
+ sis5595_driver.name)) {
dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n",
sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1);
return -ENODEV;
@@ -364,7 +366,6 @@
static struct i2c_adapter sis5595_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
- .name = "unset",
.algo = &smbus_algorithm,
};
@@ -397,6 +398,7 @@
}
static struct pci_driver sis5595_driver = {
+ .owner = THIS_MODULE,
.name = "sis5595_smbus",
.id_table = sis5595_ids,
.probe = sis5595_probe,
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 86f0f44..7f49e5f 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -92,6 +92,8 @@
#define SIS630_PCALL 0x04
#define SIS630_BLOCK_DATA 0x05
+static struct pci_driver sis630_driver;
+
/* insmod parameters */
static int high_clock;
static int force;
@@ -101,7 +103,7 @@
MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!");
/* acpi base address */
-static unsigned short acpi_base = 0;
+static unsigned short acpi_base;
/* supported chips */
static int supported[] = {
@@ -432,7 +434,8 @@
dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base);
/* Everything is happy, let's grab the memory and set things up. */
- if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, "sis630-smbus")) {
+ if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION,
+ sis630_driver.name)) {
dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already "
"in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA);
goto exit;
@@ -455,7 +458,6 @@
static struct i2c_adapter sis630_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
- .name = "unset",
.algo = &smbus_algorithm,
};
@@ -494,6 +496,7 @@
static struct pci_driver sis630_driver = {
+ .owner = THIS_MODULE,
.name = "sis630_smbus",
.id_table = sis630_ids,
.probe = sis630_probe,
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index ead2ff3..6a134c0 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -82,8 +82,9 @@
#define SIS96x_PROC_CALL 0x04
#define SIS96x_BLOCK_DATA 0x05
+static struct pci_driver sis96x_driver;
static struct i2c_adapter sis96x_adapter;
-static u16 sis96x_smbus_base = 0;
+static u16 sis96x_smbus_base;
static inline u8 sis96x_read(u8 reg)
{
@@ -257,7 +258,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static struct pci_device_id sis96x_ids[] = {
@@ -294,7 +294,8 @@
sis96x_smbus_base);
/* Everything is happy, let's grab the memory and set things up. */
- if (!request_region(sis96x_smbus_base, SMB_IOSIZE, "sis96x-smbus")) {
+ if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
+ sis96x_driver.name)) {
dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x "
"already in use!\n", sis96x_smbus_base,
sis96x_smbus_base + SMB_IOSIZE - 1);
@@ -328,6 +329,7 @@
}
static struct pci_driver sis96x_driver = {
+ .owner = THIS_MODULE,
.name = "sis96x_smbus",
.id_table = sis96x_ids,
.probe = sis96x_probe,
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 040b8ab..544a38e 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -43,9 +43,9 @@
/* io-region reservation */
#define IOSPACE 0x06
-#define IOTEXT "via-i2c"
-static u16 pm_io_base = 0;
+static struct pci_driver vt586b_driver;
+static u16 pm_io_base;
/*
It does not appear from the datasheet that the GPIO pins are
@@ -130,7 +130,7 @@
pci_read_config_word(dev, base, &pm_io_base);
pm_io_base &= (0xff << 8);
- if (!request_region(I2C_DIR, IOSPACE, IOTEXT)) {
+ if (!request_region(I2C_DIR, IOSPACE, vt586b_driver.name)) {
dev_err(&dev->dev, "IO 0x%x-0x%x already in use\n", I2C_DIR, I2C_DIR + IOSPACE);
return -ENODEV;
}
@@ -159,6 +159,7 @@
static struct pci_driver vt586b_driver = {
+ .owner = THIS_MODULE,
.name = "vt586b_smbus",
.id_table = vt586b_ids,
.probe = vt586b_probe,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 99d209e..c9366b5 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -1,9 +1,10 @@
/*
i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
- Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
+ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
+ Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -21,15 +22,19 @@
*/
/*
- Supports Via devices:
- 82C596A/B (0x3050)
- 82C596B (0x3051)
- 82C686A/B
- 8231
- 8233
- 8233A (0x3147 and 0x3177)
- 8235
- 8237
+ Supports the following VIA south bridges:
+
+ Chip name PCI ID REV I2C block
+ VT82C596A 0x3050 no
+ VT82C596B 0x3051 no
+ VT82C686A 0x3057 0x30 no
+ VT82C686B 0x3057 0x40 yes
+ VT8231 0x8235 no?
+ VT8233 0x3074 yes
+ VT8233A 0x3147 yes?
+ VT8235 0x3177 yes
+ VT8237R 0x3227 yes
+
Note: we assume there can only be one device, with one SMBus interface.
*/
@@ -38,7 +43,6 @@
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
-#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
@@ -46,48 +50,37 @@
static struct pci_dev *vt596_pdev;
-#define SMBBA1 0x90
-#define SMBBA2 0x80
-#define SMBBA3 0xD0
+#define SMBBA1 0x90
+#define SMBBA2 0x80
+#define SMBBA3 0xD0
/* SMBus address offsets */
static unsigned short vt596_smba;
#define SMBHSTSTS (vt596_smba + 0)
-#define SMBHSLVSTS (vt596_smba + 1)
#define SMBHSTCNT (vt596_smba + 2)
#define SMBHSTCMD (vt596_smba + 3)
#define SMBHSTADD (vt596_smba + 4)
#define SMBHSTDAT0 (vt596_smba + 5)
#define SMBHSTDAT1 (vt596_smba + 6)
#define SMBBLKDAT (vt596_smba + 7)
-#define SMBSLVCNT (vt596_smba + 8)
-#define SMBSHDWCMD (vt596_smba + 9)
-#define SMBSLVEVT (vt596_smba + 0xA)
-#define SMBSLVDAT (vt596_smba + 0xC)
/* PCI Address Constants */
/* SMBus data in configuration space can be found in two places,
- We try to select the better one*/
+ We try to select the better one */
-static unsigned short smb_cf_hstcfg = 0xD2;
-
-#define SMBHSTCFG (smb_cf_hstcfg)
-#define SMBSLVC (smb_cf_hstcfg + 1)
-#define SMBSHDW1 (smb_cf_hstcfg + 2)
-#define SMBSHDW2 (smb_cf_hstcfg + 3)
-#define SMBREV (smb_cf_hstcfg + 4)
+static unsigned short SMBHSTCFG = 0xD2;
/* Other settings */
#define MAX_TIMEOUT 500
-#define ENABLE_INT9 0
/* VT82C596 constants */
-#define VT596_QUICK 0x00
-#define VT596_BYTE 0x04
-#define VT596_BYTE_DATA 0x08
-#define VT596_WORD_DATA 0x0C
-#define VT596_BLOCK_DATA 0x14
+#define VT596_QUICK 0x00
+#define VT596_BYTE 0x04
+#define VT596_BYTE_DATA 0x08
+#define VT596_WORD_DATA 0x0C
+#define VT596_BLOCK_DATA 0x14
+#define VT596_I2C_BLOCK_DATA 0x34
/* If force is set to anything different from 0, we forcibly enable the
@@ -105,40 +98,65 @@
"EXTREMELY DANGEROUS!");
+static struct pci_driver vt596_driver;
static struct i2c_adapter vt596_adapter;
-/* Another internally used function */
-static int vt596_transaction(void)
+#define FEATURE_I2CBLOCK (1<<0)
+static unsigned int vt596_features;
+
+#ifdef DEBUG
+static void vt596_dump_regs(const char *msg, u8 size)
+{
+ dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x "
+ "DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT),
+ inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+ inb_p(SMBHSTDAT1));
+
+ if (size == VT596_BLOCK_DATA
+ || size == VT596_I2C_BLOCK_DATA) {
+ int i;
+
+ dev_dbg(&vt596_adapter.dev, "BLK=");
+ for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++)
+ printk("%02x,", inb_p(SMBBLKDAT));
+ printk("\n");
+ dev_dbg(&vt596_adapter.dev, " ");
+ for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++)
+ printk("%02x,", inb_p(SMBBLKDAT));
+ printk("%02x\n", inb_p(SMBBLKDAT));
+ }
+}
+#else
+static inline void vt596_dump_regs(const char *msg, u8 size) { }
+#endif
+
+/* Return -1 on error, 0 on success */
+static int vt596_transaction(u8 size)
{
int temp;
int result = 0;
int timeout = 0;
- dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
+ vt596_dump_regs("Transaction (pre)", size);
/* Make sure the SMBus host is ready to start transmitting */
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
- "Resetting...\n", temp);
-
+ "Resetting... ", temp);
+
outb_p(temp, SMBHSTSTS);
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
- dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp);
-
+ printk("Failed! (0x%02x)\n", temp);
return -1;
} else {
- dev_dbg(&vt596_adapter.dev, "Successfull!\n");
+ printk("Successful!\n");
}
}
- /* start the transaction by setting bit 6 */
- outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+ /* Start the transaction by setting bit 6 */
+ outb_p(0x40 | (size & 0x3C), SMBHSTCNT);
- /* We will always wait for a fraction of a second!
- I don't know if VIA needs this, Intel did */
+ /* We will always wait for a fraction of a second */
do {
msleep(1);
temp = inb_p(SMBHSTSTS);
@@ -147,77 +165,61 @@
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n");
+ dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
}
if (temp & 0x10) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n");
+ dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
+ inb_p(SMBHSTCNT) & 0x3C);
}
if (temp & 0x08) {
result = -1;
- dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be "
- "locked until next hard\nreset. (sorry!)\n");
- /* Clock stops and slave is stuck in mid-transmission */
+ dev_err(&vt596_adapter.dev, "SMBus collision!\n");
}
if (temp & 0x04) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "Error: no response!\n");
+ /* Quick commands are used to probe for chips, so
+ errors are expected, and we don't want to frighten the
+ user. */
+ if ((inb_p(SMBHSTCNT) & 0x3C) != VT596_QUICK)
+ dev_err(&vt596_adapter.dev, "Transaction error!\n");
}
- if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+ /* Resetting status register */
+ if (temp & 0x1F)
outb_p(temp, SMBHSTSTS);
- if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
- dev_warn(&vt596_adapter.dev, "Failed reset at end "
- "of transaction (%02x)\n", temp);
- }
- }
- dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
-
+ vt596_dump_regs("Transaction (post)", size);
+
return result;
}
-/* Return -1 on error. */
+/* Return -1 on error, 0 on success */
static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write, u8 command,
- int size, union i2c_smbus_data *data)
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
{
- int i, len;
+ int i;
switch (size) {
- case I2C_SMBUS_PROC_CALL:
- dev_info(&vt596_adapter.dev,
- "I2C_SMBUS_PROC_CALL not supported!\n");
- return -1;
case I2C_SMBUS_QUICK:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
size = VT596_QUICK;
break;
case I2C_SMBUS_BYTE:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(command, SMBHSTCMD);
size = VT596_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(data->byte, SMBHSTDAT0);
size = VT596_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->word & 0xff, SMBHSTDAT0);
@@ -225,28 +227,33 @@
}
size = VT596_WORD_DATA;
break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (!(vt596_features & FEATURE_I2CBLOCK))
+ goto exit_unsupported;
+ if (read_write == I2C_SMBUS_READ)
+ outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0);
+ /* Fall through */
case I2C_SMBUS_BLOCK_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
- len = data->block[0];
- if (len < 0)
- len = 0;
+ u8 len = data->block[0];
if (len > I2C_SMBUS_BLOCK_MAX)
len = I2C_SMBUS_BLOCK_MAX;
outb_p(len, SMBHSTDAT0);
- i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= len; i++)
outb_p(data->block[i], SMBBLKDAT);
}
- size = VT596_BLOCK_DATA;
+ size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ?
+ VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA;
break;
+ default:
+ goto exit_unsupported;
}
- outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+ outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD);
- if (vt596_transaction()) /* Error in transaction */
+ if (vt596_transaction(size)) /* Error in transaction */
return -1;
if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
@@ -254,35 +261,39 @@
switch (size) {
case VT596_BYTE:
- /* Where is the result put? I assume here it is in
- * SMBHSTDAT0 but it might just as well be in the
- * SMBHSTCMD. No clue in the docs
- */
- data->byte = inb_p(SMBHSTDAT0);
- break;
case VT596_BYTE_DATA:
data->byte = inb_p(SMBHSTDAT0);
break;
case VT596_WORD_DATA:
data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
break;
+ case VT596_I2C_BLOCK_DATA:
case VT596_BLOCK_DATA:
data->block[0] = inb_p(SMBHSTDAT0);
if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
data->block[0] = I2C_SMBUS_BLOCK_MAX;
- i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= data->block[0]; i++)
data->block[i] = inb_p(SMBBLKDAT);
break;
}
return 0;
+
+exit_unsupported:
+ dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n",
+ size);
+ return -1;
}
static u32 vt596_func(struct i2c_adapter *adapter)
{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA;
+
+ if (vt596_features & FEATURE_I2CBLOCK)
+ func |= I2C_FUNC_SMBUS_I2C_BLOCK;
+ return func;
}
static struct i2c_algorithm smbus_algorithm = {
@@ -294,7 +305,6 @@
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static int __devinit vt596_probe(struct pci_dev *pdev,
@@ -302,7 +312,7 @@
{
unsigned char temp;
int error = -ENODEV;
-
+
/* Determine the address of the SMBus areas */
if (force_addr) {
vt596_smba = force_addr & 0xfff0;
@@ -311,12 +321,12 @@
}
if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) ||
- !(vt596_smba & 0x1)) {
+ !(vt596_smba & 0x0001)) {
/* try 2nd address and config reg. for 596 */
if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
!pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
- (vt596_smba & 0x1)) {
- smb_cf_hstcfg = 0x84;
+ (vt596_smba & 0x0001)) {
+ SMBHSTCFG = 0x84;
} else {
/* no matches at all */
dev_err(&pdev->dev, "Cannot configure "
@@ -333,10 +343,10 @@
return -ENODEV;
}
- found:
- if (!request_region(vt596_smba, 8, "viapro-smbus")) {
+found:
+ if (!request_region(vt596_smba, 8, vt596_driver.name)) {
dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
- vt596_smba);
+ vt596_smba);
return -ENODEV;
}
@@ -348,16 +358,16 @@
pci_write_config_word(pdev, id->driver_data, vt596_smba);
pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
- "address 0x%04x!\n", vt596_smba);
- } else if ((temp & 1) == 0) {
+ "address 0x%04x!\n", vt596_smba);
+ } else if (!(temp & 0x01)) {
if (force) {
- /* NOTE: This assumes I/O space and other allocations
- * WERE done by the Bios! Don't complain if your
- * hardware does weird things after enabling this.
- * :') Check for Bios updates before resorting to
+ /* NOTE: This assumes I/O space and other allocations
+ * WERE done by the Bios! Don't complain if your
+ * hardware does weird things after enabling this.
+ * :') Check for Bios updates before resorting to
* this.
*/
- pci_write_config_byte(pdev, SMBHSTCFG, temp | 1);
+ pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
dev_info(&pdev->dev, "Enabling SMBus device\n");
} else {
dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
@@ -367,22 +377,28 @@
}
}
- if ((temp & 0x0E) == 8)
- dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n");
- else if ((temp & 0x0E) == 0)
- dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n");
- else
- dev_dbg(&pdev->dev, "Illegal Interrupt configuration "
- "(or code out of date)!\n");
-
- pci_read_config_byte(pdev, SMBREV, &temp);
- dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_VIA_8237:
+ case PCI_DEVICE_ID_VIA_8235:
+ case PCI_DEVICE_ID_VIA_8233A:
+ case PCI_DEVICE_ID_VIA_8233_0:
+ vt596_features |= FEATURE_I2CBLOCK;
+ break;
+ case PCI_DEVICE_ID_VIA_82C686_4:
+ /* The VT82C686B (rev 0x40) does support I2C block
+ transactions, but the VT82C686A (rev 0x30) doesn't */
+ if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp)
+ && temp >= 0x40)
+ vt596_features |= FEATURE_I2CBLOCK;
+ break;
+ }
+
vt596_adapter.dev.parent = &pdev->dev;
snprintf(vt596_adapter.name, I2C_NAME_SIZE,
- "SMBus Via Pro adapter at %04x", vt596_smba);
-
+ "SMBus Via Pro adapter at %04x", vt596_smba);
+
vt596_pdev = pci_dev_get(pdev);
if (i2c_add_adapter(&vt596_adapter)) {
pci_dev_put(vt596_pdev);
@@ -395,7 +411,7 @@
*/
return -ENODEV;
- release_region:
+release_region:
release_region(vt596_smba, 8);
return error;
}
@@ -420,9 +436,10 @@
{ 0, }
};
-MODULE_DEVICE_TABLE (pci, vt596_ids);
+MODULE_DEVICE_TABLE(pci, vt596_ids);
static struct pci_driver vt596_driver = {
+ .owner = THIS_MODULE,
.name = "vt596_smbus",
.id_table = vt596_ids,
.probe = vt596_probe,
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index b675773..650c3eb 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -225,6 +225,7 @@
}
static struct pci_driver voodoo3_driver = {
+ .owner = THIS_MODULE,
.name = "voodoo3_smbus",
.id_table = voodoo3_ids,
.probe = voodoo3_probe,
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index a1d580e..d3478e0 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -442,14 +442,13 @@
int rc = 0;
char description[64];
- iface = kmalloc(sizeof(*iface), GFP_KERNEL);
+ iface = kzalloc(sizeof(*iface), GFP_KERNEL);
if (!iface) {
printk(KERN_ERR NAME ": can't allocate memory\n");
rc = -ENOMEM;
goto errout;
}
- memset(iface, 0, sizeof(*iface));
adapter = &iface->adapter;
i2c_set_adapdata(adapter, iface);
snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 6bd44a4..f9fae28 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -126,4 +126,13 @@
This driver can also be built as a module. If so, the module
will be called max6875.
+config RTC_X1205_I2C
+ tristate "Xicor X1205 RTC chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Xicor X1205 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called x1205.
+
endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index a876dd4..46178b5 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -13,6 +13,7 @@
obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
+obj-$(CONFIG_RTC_X1205_I2C) += x1205.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c
index 9d3175c..01b0370 100644
--- a/drivers/i2c/chips/ds1337.c
+++ b/drivers/i2c/chips/ds1337.c
@@ -243,11 +243,10 @@
I2C_FUNC_I2C))
goto exit;
- if (!(data = kmalloc(sizeof(struct ds1337_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct ds1337_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct ds1337_data));
INIT_LIST_HEAD(&data->list);
/* The common I2C client data is placed right before the
diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c
index 0936327..da488b7 100644
--- a/drivers/i2c/chips/ds1374.c
+++ b/drivers/i2c/chips/ds1374.c
@@ -167,7 +167,8 @@
static ulong new_time;
-DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet, (ulong) & new_time);
+static DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet,
+ (ulong) & new_time);
int ds1374_set_rtc_time(ulong nowtime)
{
@@ -193,13 +194,11 @@
struct i2c_client *client;
int rc;
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!client)
return -ENOMEM;
- memset(client, 0, sizeof(struct i2c_client));
strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE);
- client->flags = I2C_DF_NOTIFY;
client->addr = addr;
client->adapter = adap;
client->driver = &ds1374_driver;
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index d58403a..4baf573 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -88,8 +88,8 @@
dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
- for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_I2C_BLOCK_MAX)
- if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_I2C_BLOCK_MAX)
+ for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_BLOCK_MAX)
+ if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_BLOCK_MAX)
goto exit;
} else {
if (i2c_smbus_write_byte(client, slice << 5)) {
@@ -155,7 +155,7 @@
}
/* This function is called by i2c_probe */
-int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
+static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct eeprom_data *data;
@@ -171,11 +171,10 @@
| I2C_FUNC_SMBUS_BYTE))
goto exit;
- if (!(data = kmalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct eeprom_data));
new_client = &data->client;
memset(data->data, 0xff, EEPROM_SIZE);
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 8ee56d4..eaa4742 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -888,6 +888,7 @@
}
struct device_driver omap_otg_driver = {
+ .owner = THIS_MODULE,
.name = "omap_otg",
.bus = &platform_bus_type,
.probe = otg_probe,
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
index 3f14528..3df309a 100644
--- a/drivers/i2c/chips/m41t00.c
+++ b/drivers/i2c/chips/m41t00.c
@@ -174,13 +174,11 @@
struct i2c_client *client;
int rc;
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!client)
return -ENOMEM;
- memset(client, 0, sizeof(struct i2c_client));
strncpy(client->name, M41T00_DRV_NAME, I2C_NAME_SIZE);
- client->flags = I2C_DF_NOTIFY;
client->addr = addr;
client->adapter = adap;
client->driver = &m41t00_driver;
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index 9e1aeb6..b376a00 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -179,16 +179,14 @@
if (address & 1)
return 0;
- if (!(data = kmalloc(sizeof(struct max6875_data), GFP_KERNEL)))
+ if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
return -ENOMEM;
- memset(data, 0, sizeof(struct max6875_data));
/* A fake client is created on the odd address */
- if (!(fake_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
+ if (!(fake_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_kfree1;
}
- memset(fake_client, 0, sizeof(struct i2c_client));
/* Init real i2c_client */
real_client = &data->client;
diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c
index 225577fd..59a9303 100644
--- a/drivers/i2c/chips/pca9539.c
+++ b/drivers/i2c/chips/pca9539.c
@@ -122,11 +122,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet. */
- if (!(data = kmalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct pca9539_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c
index 6525743..c323c2d 100644
--- a/drivers/i2c/chips/pcf8574.c
+++ b/drivers/i2c/chips/pcf8574.c
@@ -115,7 +115,7 @@
}
/* This function is called by i2c_probe */
-int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
+static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct pcf8574_data *data;
@@ -127,11 +127,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet. */
- if (!(data = kmalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct pcf8574_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c
index 80f1df9..ce420a6 100644
--- a/drivers/i2c/chips/pcf8591.c
+++ b/drivers/i2c/chips/pcf8591.c
@@ -166,7 +166,7 @@
}
/* This function is called by i2c_probe */
-int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
+static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind)
{
struct i2c_client *new_client;
struct pcf8591_data *data;
@@ -178,11 +178,10 @@
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet. */
- if (!(data = kmalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
- memset(data, 0, sizeof(struct pcf8591_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
diff --git a/drivers/i2c/chips/rtc8564.c b/drivers/i2c/chips/rtc8564.c
index 0b5385c..916cdc1 100644
--- a/drivers/i2c/chips/rtc8564.c
+++ b/drivers/i2c/chips/rtc8564.c
@@ -148,17 +148,16 @@
{addr, I2C_M_RD, 2, data}
};
- d = kmalloc(sizeof(struct rtc8564_data), GFP_KERNEL);
+ d = kzalloc(sizeof(struct rtc8564_data), GFP_KERNEL);
if (!d) {
ret = -ENOMEM;
goto done;
}
- memset(d, 0, sizeof(struct rtc8564_data));
new_client = &d->client;
strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE);
i2c_set_clientdata(new_client, d);
- new_client->flags = I2C_CLIENT_ALLOW_USE | I2C_DF_NOTIFY;
+ new_client->flags = I2C_CLIENT_ALLOW_USE;
new_client->addr = addr;
new_client->adapter = adap;
new_client->driver = &rtc8564_driver;
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 280e963..280dd7a 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -500,11 +500,10 @@
return 0;
}
- tps = kmalloc(sizeof *tps, GFP_KERNEL);
+ tps = kzalloc(sizeof *tps, GFP_KERNEL);
if (!tps)
return 0;
- memset(tps, 0, sizeof *tps);
init_MUTEX(&tps->lock);
INIT_WORK(&tps->work, tps65010_work, tps);
tps->irq = -1;
diff --git a/drivers/i2c/chips/x1205.c b/drivers/i2c/chips/x1205.c
new file mode 100644
index 0000000..7da366c
--- /dev/null
+++ b/drivers/i2c/chips/x1205.c
@@ -0,0 +1,698 @@
+/*
+ * x1205.c - An i2c driver for the Xicor X1205 RTC
+ * Copyright 2004 Karen Spearel
+ * Copyright 2005 Alessandro Zummo
+ *
+ * please send all reports to:
+ * kas11 at tampabay dot rr dot com
+ * a dot zummo at towertech dot it
+ *
+ * based on the other drivers in this same directory.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/string.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/list.h>
+
+#include <linux/x1205.h>
+
+#define DRV_VERSION "0.9.9"
+
+/* Addresses to scan: none. This chip is located at
+ * 0x6f and uses a two bytes register addressing.
+ * Two bytes need to be written to read a single register,
+ * while most other chips just require one and take the second
+ * one as the data to be written. To prevent corrupting
+ * unknown chips, the user must explicitely set the probe parameter.
+ */
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD;
+I2C_CLIENT_MODULE_PARM(hctosys,
+ "Set the system time from the hardware clock upon initialization");
+
+/* offsets into CCR area */
+
+#define CCR_SEC 0
+#define CCR_MIN 1
+#define CCR_HOUR 2
+#define CCR_MDAY 3
+#define CCR_MONTH 4
+#define CCR_YEAR 5
+#define CCR_WDAY 6
+#define CCR_Y2K 7
+
+#define X1205_REG_SR 0x3F /* status register */
+#define X1205_REG_Y2K 0x37
+#define X1205_REG_DW 0x36
+#define X1205_REG_YR 0x35
+#define X1205_REG_MO 0x34
+#define X1205_REG_DT 0x33
+#define X1205_REG_HR 0x32
+#define X1205_REG_MN 0x31
+#define X1205_REG_SC 0x30
+#define X1205_REG_DTR 0x13
+#define X1205_REG_ATR 0x12
+#define X1205_REG_INT 0x11
+#define X1205_REG_0 0x10
+#define X1205_REG_Y2K1 0x0F
+#define X1205_REG_DWA1 0x0E
+#define X1205_REG_YRA1 0x0D
+#define X1205_REG_MOA1 0x0C
+#define X1205_REG_DTA1 0x0B
+#define X1205_REG_HRA1 0x0A
+#define X1205_REG_MNA1 0x09
+#define X1205_REG_SCA1 0x08
+#define X1205_REG_Y2K0 0x07
+#define X1205_REG_DWA0 0x06
+#define X1205_REG_YRA0 0x05
+#define X1205_REG_MOA0 0x04
+#define X1205_REG_DTA0 0x03
+#define X1205_REG_HRA0 0x02
+#define X1205_REG_MNA0 0x01
+#define X1205_REG_SCA0 0x00
+
+#define X1205_CCR_BASE 0x30 /* Base address of CCR */
+#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
+
+#define X1205_SR_RTCF 0x01 /* Clock failure */
+#define X1205_SR_WEL 0x02 /* Write Enable Latch */
+#define X1205_SR_RWEL 0x04 /* Register Write Enable */
+
+#define X1205_DTR_DTR0 0x01
+#define X1205_DTR_DTR1 0x02
+#define X1205_DTR_DTR2 0x04
+
+#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
+
+/* Prototypes */
+static int x1205_attach(struct i2c_adapter *adapter);
+static int x1205_detach(struct i2c_client *client);
+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
+static int x1205_command(struct i2c_client *client, unsigned int cmd,
+ void *arg);
+
+static struct i2c_driver x1205_driver = {
+ .owner = THIS_MODULE,
+ .name = "x1205",
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = &x1205_attach,
+ .detach_client = &x1205_detach,
+};
+
+struct x1205_data {
+ struct i2c_client client;
+ struct list_head list;
+ unsigned int epoch;
+};
+
+static const unsigned char days_in_mo[] =
+ { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
+
+static LIST_HEAD(x1205_clients);
+
+/* Workaround until the I2C subsytem will allow to send
+ * commands to a specific client. This function will send the command
+ * to the first client.
+ */
+int x1205_do_command(unsigned int cmd, void *arg)
+{
+ struct list_head *walk;
+ struct list_head *tmp;
+ struct x1205_data *data;
+
+ list_for_each_safe(walk, tmp, &x1205_clients) {
+ data = list_entry(walk, struct x1205_data, list);
+ return x1205_command(&data->client, cmd, arg);
+ }
+
+ return -ENODEV;
+}
+
+#define is_leap(year) \
+ ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
+
+/* make sure the rtc_time values are in bounds */
+static int x1205_validate_tm(struct rtc_time *tm)
+{
+ int year = tm->tm_year + 1900;
+
+ if ((tm->tm_year < 70) || (tm->tm_year > 255))
+ return -EINVAL;
+
+ if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
+ return -EINVAL;
+
+ if (tm->tm_mday > days_in_mo[tm->tm_mon]
+ + ((tm->tm_mon == 1) && is_leap(year)))
+ return -EINVAL;
+
+ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * In the routines that deal directly with the x1205 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
+ * Epoch is initialized as 2000. Time is set to UTC.
+ */
+static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
+ u8 reg_base)
+{
+ unsigned char dt_addr[2] = { 0, reg_base };
+ static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
+
+ unsigned char buf[8], sr;
+
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, sr_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &sr }, /* read status */
+ { client->addr, 0, 2, dt_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 8, buf }, /* read date */
+ };
+
+ struct x1205_data *data = i2c_get_clientdata(client);
+
+ /* read status register */
+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ /* check for battery failure */
+ if (sr & X1205_SR_RTCF) {
+ dev_warn(&client->dev,
+ "Clock had a power failure, you must set the date.\n");
+ return -EINVAL;
+ }
+
+ /* read date registers */
+ if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ dev_dbg(&client->dev,
+ "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
+ "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
+ __FUNCTION__,
+ buf[0], buf[1], buf[2], buf[3],
+ buf[4], buf[5], buf[6], buf[7]);
+
+ tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
+ tm->tm_min = BCD2BIN(buf[CCR_MIN]);
+ tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
+ tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
+ tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
+ data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
+ tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900;
+ tm->tm_wday = buf[CCR_WDAY];
+
+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __FUNCTION__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ return 0;
+}
+
+static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
+ int datetoo, u8 reg_base)
+{
+ int i, err, xfer;
+
+ unsigned char buf[8];
+
+ static const unsigned char wel[3] = { 0, X1205_REG_SR,
+ X1205_SR_WEL };
+
+ static const unsigned char rwel[3] = { 0, X1205_REG_SR,
+ X1205_SR_WEL | X1205_SR_RWEL };
+
+ static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
+
+ struct x1205_data *data = i2c_get_clientdata(client);
+
+ /* check if all values in the tm struct are correct */
+ if ((err = x1205_validate_tm(tm)) < 0)
+ return err;
+
+ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+ "mday=%d, mon=%d, year=%d, wday=%d\n",
+ __FUNCTION__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
+ buf[CCR_MIN] = BIN2BCD(tm->tm_min);
+
+ /* set hour and 24hr bit */
+ buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
+
+ /* should we also set the date? */
+ if (datetoo) {
+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
+
+ /* month, 0 - 11 */
+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
+
+ /* year, since 1900 */
+ buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch);
+ buf[CCR_WDAY] = tm->tm_wday & 0x07;
+ buf[CCR_Y2K] = BIN2BCD(data->epoch / 100);
+ }
+
+ /* this sequence is required to unlock the chip */
+ xfer = i2c_master_send(client, wel, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
+ return -EIO;
+ }
+
+ xfer = i2c_master_send(client, rwel, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
+ return -EIO;
+ }
+
+ /* write register's data */
+ for (i = 0; i < (datetoo ? 8 : 3); i++) {
+ unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
+
+ xfer = i2c_master_send(client, rdata, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev,
+ "%s: xfer=%d addr=%02x, data=%02x\n",
+ __FUNCTION__,
+ xfer, rdata[1], rdata[2]);
+ return -EIO;
+ }
+ };
+
+ /* disable further writes */
+ xfer = i2c_master_send(client, diswe, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int x1205_get_dtrim(struct i2c_client *client, int *trim)
+{
+ unsigned char dtr;
+ static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
+
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
+ };
+
+ /* read dtr register */
+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
+
+ *trim = 0;
+
+ if (dtr & X1205_DTR_DTR0)
+ *trim += 20;
+
+ if (dtr & X1205_DTR_DTR1)
+ *trim += 10;
+
+ if (dtr & X1205_DTR_DTR2)
+ *trim = -*trim;
+
+ return 0;
+}
+
+static int x1205_get_atrim(struct i2c_client *client, int *trim)
+{
+ s8 atr;
+ static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
+
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, atr_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
+ };
+
+ /* read atr register */
+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
+ return -EIO;
+ }
+
+ dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
+
+ /* atr is a two's complement value on 6 bits,
+ * perform sign extension. The formula is
+ * Catr = (atr * 0.25pF) + 11.00pF.
+ */
+ if (atr & 0x20)
+ atr |= 0xC0;
+
+ dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
+
+ *trim = (atr * 250) + 11000;
+
+ dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
+
+ return 0;
+}
+
+static int x1205_hctosys(struct i2c_client *client)
+{
+ int err;
+
+ struct rtc_time tm;
+ struct timespec tv;
+
+ err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
+
+ if (err) {
+ dev_err(&client->dev,
+ "Unable to set the system clock\n");
+ return err;
+ }
+
+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
+ * whether it stores the most close value or the value with partial
+ * seconds truncated. However, it is important that we use it to store
+ * the truncated value. This is because otherwise it is necessary,
+ * in an rtc sync function, to read both xtime.tv_sec and
+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
+ * of >32bits is not possible. So storing the most close value would
+ * slow down the sync API. So here we have the truncated value and
+ * the best guess is to add 0.5s.
+ */
+
+ tv.tv_nsec = NSEC_PER_SEC >> 1;
+
+ /* WARNING: this is not the C library 'mktime' call, it is a built in
+ * inline function from include/linux/time.h. It expects (requires)
+ * the month to be in the range 1-12
+ */
+
+ tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1,
+ tm.tm_mday, tm.tm_hour,
+ tm.tm_min, tm.tm_sec);
+
+ do_settimeofday(&tv);
+
+ dev_info(&client->dev,
+ "setting the system clock to %d-%d-%d %d:%d:%d\n",
+ tm.tm_year + 1900, tm.tm_mon + 1,
+ tm.tm_mday, tm.tm_hour, tm.tm_min,
+ tm.tm_sec);
+
+ return 0;
+}
+
+struct x1205_limit
+{
+ unsigned char reg;
+ unsigned char mask;
+ unsigned char min;
+ unsigned char max;
+};
+
+static int x1205_validate_client(struct i2c_client *client)
+{
+ int i, xfer;
+
+ /* Probe array. We will read the register at the specified
+ * address and check if the given bits are zero.
+ */
+ static const unsigned char probe_zero_pattern[] = {
+ /* register, mask */
+ X1205_REG_SR, 0x18,
+ X1205_REG_DTR, 0xF8,
+ X1205_REG_ATR, 0xC0,
+ X1205_REG_INT, 0x18,
+ X1205_REG_0, 0xFF,
+ };
+
+ static const struct x1205_limit probe_limits_pattern[] = {
+ /* register, mask, min, max */
+ { X1205_REG_Y2K, 0xFF, 19, 20 },
+ { X1205_REG_DW, 0xFF, 0, 6 },
+ { X1205_REG_YR, 0xFF, 0, 99 },
+ { X1205_REG_MO, 0xFF, 0, 12 },
+ { X1205_REG_DT, 0xFF, 0, 31 },
+ { X1205_REG_HR, 0x7F, 0, 23 },
+ { X1205_REG_MN, 0xFF, 0, 59 },
+ { X1205_REG_SC, 0xFF, 0, 59 },
+ { X1205_REG_Y2K1, 0xFF, 19, 20 },
+ { X1205_REG_Y2K0, 0xFF, 19, 20 },
+ };
+
+ /* check that registers have bits a 0 where expected */
+ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
+ unsigned char buf;
+
+ unsigned char addr[2] = { 0, probe_zero_pattern[i] };
+
+ struct i2c_msg msgs[2] = {
+ { client->addr, 0, 2, addr },
+ { client->addr, I2C_M_RD, 1, &buf },
+ };
+
+ xfer = i2c_transfer(client->adapter, msgs, 2);
+ if (xfer != 2) {
+ dev_err(&client->adapter->dev,
+ "%s: could not read register %x\n",
+ __FUNCTION__, addr[1]);
+
+ return -EIO;
+ }
+
+ if ((buf & probe_zero_pattern[i+1]) != 0) {
+ dev_err(&client->adapter->dev,
+ "%s: register=%02x, zero pattern=%d, value=%x\n",
+ __FUNCTION__, addr[1], i, buf);
+
+ return -ENODEV;
+ }
+ }
+
+ /* check limits (only registers with bcd values) */
+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
+ unsigned char reg, value;
+
+ unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
+
+ struct i2c_msg msgs[2] = {
+ { client->addr, 0, 2, addr },
+ { client->addr, I2C_M_RD, 1, ® },
+ };
+
+ xfer = i2c_transfer(client->adapter, msgs, 2);
+
+ if (xfer != 2) {
+ dev_err(&client->adapter->dev,
+ "%s: could not read register %x\n",
+ __FUNCTION__, addr[1]);
+
+ return -EIO;
+ }
+
+ value = BCD2BIN(reg & probe_limits_pattern[i].mask);
+
+ if (value > probe_limits_pattern[i].max ||
+ value < probe_limits_pattern[i].min) {
+ dev_dbg(&client->adapter->dev,
+ "%s: register=%x, lim pattern=%d, value=%d\n",
+ __FUNCTION__, addr[1], i, value);
+
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
+static int x1205_attach(struct i2c_adapter *adapter)
+{
+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+
+ return i2c_probe(adapter, &addr_data, x1205_probe);
+}
+
+int x1205_direct_attach(int adapter_id,
+ struct i2c_client_address_data *address_data)
+{
+ int err;
+ struct i2c_adapter *adapter = i2c_get_adapter(adapter_id);
+
+ if (adapter) {
+ err = i2c_probe(adapter,
+ address_data, x1205_probe);
+
+ i2c_put_adapter(adapter);
+
+ return err;
+ }
+
+ return -ENODEV;
+}
+
+static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ struct x1205_data *data;
+
+ int err = 0;
+
+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ /* Initialize our structures */
+ data->epoch = 2000;
+
+ client = &data->client;
+ client->addr = address;
+ client->driver = &x1205_driver;
+ client->adapter = adapter;
+
+ strlcpy(client->name, "x1205", I2C_NAME_SIZE);
+
+ i2c_set_clientdata(client, data);
+
+ /* Verify the chip is really an X1205 */
+ if (kind < 0) {
+ if (x1205_validate_client(client) < 0) {
+ err = -ENODEV;
+ goto exit_kfree;
+ }
+ }
+
+ /* Inform the i2c layer */
+ if ((err = i2c_attach_client(client)))
+ goto exit_kfree;
+
+ list_add(&data->list, &x1205_clients);
+
+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
+
+ /* If requested, set the system time */
+ if (hctosys)
+ x1205_hctosys(client);
+
+ return 0;
+
+exit_kfree:
+ kfree(data);
+
+exit:
+ return err;
+}
+
+static int x1205_detach(struct i2c_client *client)
+{
+ int err;
+ struct x1205_data *data = i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "%s\n", __FUNCTION__);
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ list_del(&data->list);
+
+ kfree(data);
+
+ return 0;
+}
+
+static int x1205_command(struct i2c_client *client, unsigned int cmd,
+ void *param)
+{
+ if (param == NULL)
+ return -EINVAL;
+
+ if (!capable(CAP_SYS_TIME))
+ return -EACCES;
+
+ dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
+
+ switch (cmd) {
+ case X1205_CMD_GETDATETIME:
+ return x1205_get_datetime(client, param, X1205_CCR_BASE);
+
+ case X1205_CMD_SETTIME:
+ return x1205_set_datetime(client, param, 0,
+ X1205_CCR_BASE);
+
+ case X1205_CMD_SETDATETIME:
+ return x1205_set_datetime(client, param, 1,
+ X1205_CCR_BASE);
+
+ case X1205_CMD_GETALARM:
+ return x1205_get_datetime(client, param, X1205_ALM0_BASE);
+
+ case X1205_CMD_SETALARM:
+ return x1205_set_datetime(client, param, 1,
+ X1205_ALM0_BASE);
+
+ case X1205_CMD_GETDTRIM:
+ return x1205_get_dtrim(client, param);
+
+ case X1205_CMD_GETATRIM:
+ return x1205_get_atrim(client, param);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int __init x1205_init(void)
+{
+ return i2c_add_driver(&x1205_driver);
+}
+
+static void __exit x1205_exit(void)
+{
+ i2c_del_driver(&x1205_driver);
+}
+
+MODULE_AUTHOR(
+ "Karen Spearel <kas11@tampabay.rr.com>, "
+ "Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("Xicor X1205 RTC driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+EXPORT_SYMBOL_GPL(x1205_do_command);
+EXPORT_SYMBOL_GPL(x1205_direct_attach);
+
+module_init(x1205_init);
+module_exit(x1205_exit);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index dda472e..02e335a0 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -19,7 +19,8 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
- SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> */
+ SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
+ Jean Delvare <khali@linux-fr.org> */
#include <linux/module.h>
#include <linux/kernel.h>
@@ -48,7 +49,7 @@
int rc = 0;
if (dev->driver && dev->driver->suspend)
- rc = dev->driver->suspend(dev,state,0);
+ rc = dev->driver->suspend(dev, state);
return rc;
}
@@ -57,7 +58,7 @@
int rc = 0;
if (dev->driver && dev->driver->resume)
- rc = dev->driver->resume(dev,0);
+ rc = dev->driver->resume(dev);
return rc;
}
@@ -85,6 +86,7 @@
}
struct device_driver i2c_adapter_driver = {
+ .owner = THIS_MODULE,
.name = "i2c_adapter",
.bus = &i2c_bus_type,
.probe = i2c_device_probe,
@@ -98,6 +100,7 @@
}
struct class i2c_adapter_class = {
+ .owner = THIS_MODULE,
.name = "i2c-adapter",
.release = &i2c_adapter_class_dev_release,
};
@@ -291,6 +294,7 @@
down(&core_lists);
/* add the driver to the list of i2c drivers in the driver core */
+ driver->driver.owner = driver->owner;
driver->driver.name = driver->name;
driver->driver.bus = &i2c_bus_type;
driver->driver.probe = i2c_device_probe;
@@ -706,10 +710,6 @@
int i, err;
int adap_id = i2c_adapter_id(adapter);
- /* Forget it if we can't probe using SMBUS_QUICK */
- if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK))
- return -1;
-
/* Force entries are done first, and are not affected by ignore
entries */
if (address_data->forces) {
@@ -736,6 +736,17 @@
}
}
+ /* Stop here if we can't use SMBUS_QUICK */
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
+ if (address_data->probe[0] == I2C_CLIENT_END
+ && address_data->normal_i2c[0] == I2C_CLIENT_END)
+ return 0;
+
+ dev_warn(&adapter->dev, "SMBus Quick command not supported, "
+ "can't probe for chips\n");
+ return -1;
+ }
+
/* Probe entries are done second, and are not affected by ignore
entries either */
for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
@@ -820,101 +831,44 @@
return (u8)(data >> 8);
}
-/* CRC over count bytes in the first array plus the bytes in the rest
- array if it is non-null. rest[0] is the (length of rest) - 1
- and is included. */
-static u8 i2c_smbus_partial_pec(u8 crc, int count, u8 *first, u8 *rest)
+/* Incremental CRC8 over count bytes in the array pointed to by p */
+static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
{
int i;
for(i = 0; i < count; i++)
- crc = crc8((crc ^ first[i]) << 8);
- if(rest != NULL)
- for(i = 0; i <= rest[0]; i++)
- crc = crc8((crc ^ rest[i]) << 8);
+ crc = crc8((crc ^ p[i]) << 8);
return crc;
}
-static u8 i2c_smbus_pec(int count, u8 *first, u8 *rest)
+/* Assume a 7-bit address, which is reasonable for SMBus */
+static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
{
- return i2c_smbus_partial_pec(0, count, first, rest);
+ /* The address will be sent first */
+ u8 addr = (msg->addr << 1) | !!(msg->flags & I2C_M_RD);
+ pec = i2c_smbus_pec(pec, &addr, 1);
+
+ /* The data buffer follows */
+ return i2c_smbus_pec(pec, msg->buf, msg->len);
}
-/* Returns new "size" (transaction type)
- Note that we convert byte to byte_data and byte_data to word_data
- rather than invent new xxx_PEC transactions. */
-static int i2c_smbus_add_pec(u16 addr, u8 command, int size,
- union i2c_smbus_data *data)
+/* Used for write only transactions */
+static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
{
- u8 buf[3];
-
- buf[0] = addr << 1;
- buf[1] = command;
- switch(size) {
- case I2C_SMBUS_BYTE:
- data->byte = i2c_smbus_pec(2, buf, NULL);
- size = I2C_SMBUS_BYTE_DATA;
- break;
- case I2C_SMBUS_BYTE_DATA:
- buf[2] = data->byte;
- data->word = buf[2] ||
- (i2c_smbus_pec(3, buf, NULL) << 8);
- size = I2C_SMBUS_WORD_DATA;
- break;
- case I2C_SMBUS_WORD_DATA:
- /* unsupported */
- break;
- case I2C_SMBUS_BLOCK_DATA:
- data->block[data->block[0] + 1] =
- i2c_smbus_pec(2, buf, data->block);
- size = I2C_SMBUS_BLOCK_DATA_PEC;
- break;
- }
- return size;
+ msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
+ msg->len++;
}
-static int i2c_smbus_check_pec(u16 addr, u8 command, int size, u8 partial,
- union i2c_smbus_data *data)
+/* Return <0 on CRC error
+ If there was a write before this read (most cases) we need to take the
+ partial CRC from the write part into account.
+ Note that this function does modify the message (we need to decrease the
+ message length to hide the CRC byte from the caller). */
+static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
{
- u8 buf[3], rpec, cpec;
+ u8 rpec = msg->buf[--msg->len];
+ cpec = i2c_smbus_msg_pec(cpec, msg);
- buf[1] = command;
- switch(size) {
- case I2C_SMBUS_BYTE_DATA:
- buf[0] = (addr << 1) | 1;
- cpec = i2c_smbus_pec(2, buf, NULL);
- rpec = data->byte;
- break;
- case I2C_SMBUS_WORD_DATA:
- buf[0] = (addr << 1) | 1;
- buf[2] = data->word & 0xff;
- cpec = i2c_smbus_pec(3, buf, NULL);
- rpec = data->word >> 8;
- break;
- case I2C_SMBUS_WORD_DATA_PEC:
- /* unsupported */
- cpec = rpec = 0;
- break;
- case I2C_SMBUS_PROC_CALL_PEC:
- /* unsupported */
- cpec = rpec = 0;
- break;
- case I2C_SMBUS_BLOCK_DATA_PEC:
- buf[0] = (addr << 1);
- buf[2] = (addr << 1) | 1;
- cpec = i2c_smbus_pec(3, buf, data->block);
- rpec = data->block[data->block[0] + 1];
- break;
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
- buf[0] = (addr << 1) | 1;
- rpec = i2c_smbus_partial_pec(partial, 1,
- buf, data->block);
- cpec = data->block[data->block[0] + 1];
- break;
- default:
- cpec = rpec = 0;
- break;
- }
if (rpec != cpec) {
pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n",
rpec, cpec);
@@ -941,9 +895,8 @@
s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
{
- union i2c_smbus_data data; /* only for PEC */
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
- I2C_SMBUS_WRITE,value, I2C_SMBUS_BYTE,&data);
+ I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
}
s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command)
@@ -1026,13 +979,14 @@
need to use only one message; when reading, we need two. We initialize
most things with sane defaults, to keep the code below somewhat
simpler. */
- unsigned char msgbuf0[34];
- unsigned char msgbuf1[34];
+ unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
+ unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
int num = read_write == I2C_SMBUS_READ?2:1;
struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
{ addr, flags | I2C_M_RD, 0, msgbuf1 }
};
int i;
+ u8 partial_pec = 0;
msgbuf0[0] = command;
switch(size) {
@@ -1075,7 +1029,6 @@
msgbuf0[2] = (data->word >> 8) & 0xff;
break;
case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_BLOCK_DATA_PEC:
if (read_write == I2C_SMBUS_READ) {
dev_err(&adapter->dev, "Block read not supported "
"under I2C emulation!\n");
@@ -1088,23 +1041,20 @@
data->block[0]);
return -1;
}
- if(size == I2C_SMBUS_BLOCK_DATA_PEC)
- (msg[0].len)++;
- for (i = 1; i <= msg[0].len; i++)
+ for (i = 1; i < msg[0].len; i++)
msgbuf0[i] = data->block[i-1];
}
break;
case I2C_SMBUS_BLOCK_PROC_CALL:
- case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
dev_dbg(&adapter->dev, "Block process call not supported "
"under I2C emulation!\n");
return -1;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
- msg[1].len = I2C_SMBUS_I2C_BLOCK_MAX;
+ msg[1].len = I2C_SMBUS_BLOCK_MAX;
} else {
msg[0].len = data->block[0] + 1;
- if (msg[0].len > I2C_SMBUS_I2C_BLOCK_MAX + 1) {
+ if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
dev_err(&adapter->dev, "i2c_smbus_xfer_emulated called with "
"invalid block write size (%d)\n",
data->block[0]);
@@ -1120,9 +1070,30 @@
return -1;
}
+ i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
+ && size != I2C_SMBUS_I2C_BLOCK_DATA);
+ if (i) {
+ /* Compute PEC if first message is a write */
+ if (!(msg[0].flags & I2C_M_RD)) {
+ if (num == 1) /* Write only */
+ i2c_smbus_add_pec(&msg[0]);
+ else /* Write followed by read */
+ partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
+ }
+ /* Ask for PEC if last message is a read */
+ if (msg[num-1].flags & I2C_M_RD)
+ msg[num-1].len++;
+ }
+
if (i2c_transfer(adapter, msg, num) < 0)
return -1;
+ /* Check PEC if last message is a read */
+ if (i && (msg[num-1].flags & I2C_M_RD)) {
+ if (i2c_smbus_check_pec(partial_pec, &msg[num-1]) < 0)
+ return -1;
+ }
+
if (read_write == I2C_SMBUS_READ)
switch(size) {
case I2C_SMBUS_BYTE:
@@ -1137,8 +1108,8 @@
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
/* fixed at 32 for now */
- data->block[0] = I2C_SMBUS_I2C_BLOCK_MAX;
- for (i = 0; i < I2C_SMBUS_I2C_BLOCK_MAX; i++)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
data->block[i+1] = msgbuf1[i];
break;
}
@@ -1151,28 +1122,8 @@
union i2c_smbus_data * data)
{
s32 res;
- int swpec = 0;
- u8 partial = 0;
flags &= I2C_M_TEN | I2C_CLIENT_PEC;
- if((flags & I2C_CLIENT_PEC) &&
- !(i2c_check_functionality(adapter, I2C_FUNC_SMBUS_HWPEC_CALC))) {
- swpec = 1;
- if(read_write == I2C_SMBUS_READ &&
- size == I2C_SMBUS_BLOCK_DATA)
- size = I2C_SMBUS_BLOCK_DATA_PEC;
- else if(size == I2C_SMBUS_PROC_CALL)
- size = I2C_SMBUS_PROC_CALL_PEC;
- else if(size == I2C_SMBUS_BLOCK_PROC_CALL) {
- i2c_smbus_add_pec(addr, command,
- I2C_SMBUS_BLOCK_DATA, data);
- partial = data->block[data->block[0] + 1];
- size = I2C_SMBUS_BLOCK_PROC_CALL_PEC;
- } else if(read_write == I2C_SMBUS_WRITE &&
- size != I2C_SMBUS_QUICK &&
- size != I2C_SMBUS_I2C_BLOCK_DATA)
- size = i2c_smbus_add_pec(addr, command, size, data);
- }
if (adapter->algo->smbus_xfer) {
down(&adapter->bus_lock);
@@ -1183,13 +1134,6 @@
res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
command,size,data);
- if(res >= 0 && swpec &&
- size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA &&
- (read_write == I2C_SMBUS_READ || size == I2C_SMBUS_PROC_CALL_PEC ||
- size == I2C_SMBUS_BLOCK_PROC_CALL_PEC)) {
- if(i2c_smbus_check_pec(addr, command, size, partial, data))
- return -1;
- }
return res;
}
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index aa7a4fa..ea14c8f 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -26,15 +26,11 @@
/* The I2C_RDWR ioctl code is written by Kolja Waschk <waschk@telos.de> */
-/* The devfs code is contributed by Philipp Matthias Hahn
- <pmhahn@titan.lahn.de> */
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
@@ -80,10 +76,9 @@
{
struct i2c_dev *i2c_dev;
- i2c_dev = kmalloc(sizeof(*i2c_dev), GFP_KERNEL);
+ i2c_dev = kzalloc(sizeof(*i2c_dev), GFP_KERNEL);
if (!i2c_dev)
return ERR_PTR(-ENOMEM);
- memset(i2c_dev, 0x00, sizeof(*i2c_dev));
spin_lock(&i2c_dev_array_lock);
if (i2c_dev_array[adap->nr]) {
@@ -177,8 +172,8 @@
int i,datasize,res;
unsigned long funcs;
- dev_dbg(&client->adapter->dev, "i2c-%d ioctl, cmd: 0x%x, arg: %lx.\n",
- iminor(inode),cmd, arg);
+ dev_dbg(&client->adapter->dev, "ioctl, cmd=0x%02x, arg=0x%02lx\n",
+ cmd, arg);
switch ( cmd ) {
case I2C_SLAVE:
@@ -432,8 +427,6 @@
if (IS_ERR(i2c_dev))
return PTR_ERR(i2c_dev);
- devfs_mk_cdev(MKDEV(I2C_MAJOR, i2c_dev->minor),
- S_IFCHR|S_IRUSR|S_IWUSR, "i2c/%d", i2c_dev->minor);
pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
adap->name, i2c_dev->minor);
@@ -466,7 +459,6 @@
return -ENODEV;
init_completion(&i2c_dev->released);
- devfs_remove("i2c/%d", i2c_dev->minor);
return_i2c_dev(i2c_dev);
class_device_unregister(&i2c_dev->class_dev);
wait_for_completion(&i2c_dev->released);
@@ -522,8 +514,6 @@
if (res)
goto out_unreg_class;
- devfs_mk_dir("i2c");
-
return 0;
out_unreg_class:
@@ -539,7 +529,6 @@
{
i2c_del_driver(&i2cdev_driver);
class_unregister(&i2c_dev_class);
- devfs_remove("i2c");
unregister_chrdev(I2C_MAJOR,"i2c");
}
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index ee38e6b..47f2b83 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1013,6 +1013,8 @@
static DECLARE_MUTEX(idetape_ref_sem);
+static struct class *idetape_sysfs_class;
+
#define to_ide_tape(obj) container_of(obj, struct ide_tape_obj, kref)
#define ide_tape_g(disk) \
@@ -4704,6 +4706,10 @@
drive->dsc_overlap = 0;
drive->driver_data = NULL;
+ class_device_destroy(idetape_sysfs_class,
+ MKDEV(IDETAPE_MAJOR, tape->minor));
+ class_device_destroy(idetape_sysfs_class,
+ MKDEV(IDETAPE_MAJOR, tape->minor + 128));
devfs_remove("%s/mt", drive->devfs_name);
devfs_remove("%s/mtn", drive->devfs_name);
devfs_unregister_tape(g->number);
@@ -4878,6 +4884,11 @@
idetape_setup(drive, tape, minor);
+ class_device_create(idetape_sysfs_class, NULL,
+ MKDEV(IDETAPE_MAJOR, minor), dev, "%s", tape->name);
+ class_device_create(idetape_sysfs_class, NULL,
+ MKDEV(IDETAPE_MAJOR, minor + 128), dev, "n%s", tape->name);
+
devfs_mk_cdev(MKDEV(HWIF(drive)->major, minor),
S_IFCHR | S_IRUGO | S_IWUGO,
"%s/mt", drive->devfs_name);
@@ -4903,6 +4914,7 @@
static void __exit idetape_exit (void)
{
driver_unregister(&idetape_driver.gen_driver);
+ class_destroy(idetape_sysfs_class);
unregister_chrdev(IDETAPE_MAJOR, "ht");
}
@@ -4911,11 +4923,33 @@
*/
static int idetape_init (void)
{
+ int error = 1;
+ idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape");
+ if (IS_ERR(idetape_sysfs_class)) {
+ idetape_sysfs_class = NULL;
+ printk(KERN_ERR "Unable to create sysfs class for ide tapes\n");
+ error = -EBUSY;
+ goto out;
+ }
+
if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) {
printk(KERN_ERR "ide-tape: Failed to register character device interface\n");
- return -EBUSY;
+ error = -EBUSY;
+ goto out_free_class;
}
- return driver_register(&idetape_driver.gen_driver);
+
+ error = driver_register(&idetape_driver.gen_driver);
+ if (error)
+ goto out_free_driver;
+
+ return 0;
+
+out_free_driver:
+ driver_unregister(&idetape_driver.gen_driver);
+out_free_class:
+ class_destroy(idetape_sysfs_class);
+out:
+ return error;
}
module_init(idetape_init);
diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index e34730c..cbbbe14 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -2361,7 +2361,7 @@
ohci = (struct ti_ohci *)host->hostdata;
- class_device_create(hpsb_protocol_class, MKDEV(
+ class_device_create(hpsb_protocol_class, NULL, MKDEV(
IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2)),
NULL, "dv1394-%d", id);
devfs_mk_dir("ieee1394/dv/host%d", id);
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 347ece6..7fff5a1 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -1292,7 +1292,7 @@
if (ud->device.driver &&
(!ud->device.driver->suspend ||
- ud->device.driver->suspend(&ud->device, PMSG_SUSPEND, 0)))
+ ud->device.driver->suspend(&ud->device, PMSG_SUSPEND)))
device_release_driver(&ud->device);
}
up_write(&ne->device.bus->subsys.rwsem);
@@ -1315,7 +1315,7 @@
continue;
if (ud->device.driver && ud->device.driver->resume)
- ud->device.driver->resume(&ud->device, 0);
+ ud->device.driver->resume(&ud->device);
}
up_read(&ne->device.bus->subsys.rwsem);
diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c
index 0470f77..24411e6 100644
--- a/drivers/ieee1394/raw1394.c
+++ b/drivers/ieee1394/raw1394.c
@@ -2912,7 +2912,7 @@
hpsb_register_highlevel(&raw1394_highlevel);
- if (IS_ERR(class_device_create(hpsb_protocol_class, MKDEV(
+ if (IS_ERR(class_device_create(hpsb_protocol_class, NULL, MKDEV(
IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16),
NULL, RAW1394_DEVICE_NAME))) {
ret = -EFAULT;
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index 11be9c9..23911da 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -1370,7 +1370,7 @@
hpsb_set_hostinfo_key(&video1394_highlevel, host, ohci->host->id);
minor = IEEE1394_MINOR_BLOCK_VIDEO1394 * 16 + ohci->host->id;
- class_device_create(hpsb_protocol_class, MKDEV(
+ class_device_create(hpsb_protocol_class, NULL, MKDEV(
IEEE1394_MAJOR, minor),
NULL, "%s-%d", VIDEO1394_DRIVER_NAME, ohci->host->id);
devfs_mk_cdev(MKDEV(IEEE1394_MAJOR, minor),
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index d0f0b0a..021b8f1d 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -1300,7 +1300,7 @@
goto err_class;
}
- class_device_create(ib_ucm_class, IB_UCM_DEV, NULL, "ucm");
+ class_device_create(ib_ucm_class, NULL, IB_UCM_DEV, NULL, "ucm");
idr_init(&ctx_id_table);
init_MUTEX(&ctx_id_mutex);
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 3738d17..a4696cd 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -20,7 +20,6 @@
#include <linux/major.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/compat.h>
struct evdev {
@@ -662,6 +661,7 @@
static struct input_handle *evdev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id)
{
struct evdev *evdev;
+ struct class_device *cdev;
int minor;
for (minor = 0; minor < EVDEV_MINORS && evdev_table[minor]; minor++);
@@ -687,11 +687,13 @@
evdev_table[minor] = evdev;
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/event%d", minor);
- class_device_create(input_class,
+ cdev = class_device_create(&input_class, &dev->cdev,
MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor),
- dev->dev, "event%d", minor);
+ dev->cdev.dev, evdev->name);
+
+ /* temporary symlink to keep userspace happy */
+ sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj,
+ evdev->name);
return &evdev->handle;
}
@@ -701,9 +703,9 @@
struct evdev *evdev = handle->private;
struct evdev_list *list;
- class_device_destroy(input_class,
+ sysfs_remove_link(&input_class.subsys.kset.kobj, evdev->name);
+ class_device_destroy(&input_class,
MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor));
- devfs_remove("input/event%d", evdev->minor);
evdev->exist = 0;
if (evdev->open) {
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 14ae558..3b1685f 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -22,12 +22,12 @@
#include <linux/interrupt.h>
#include <linux/poll.h>
#include <linux/device.h>
-#include <linux/devfs_fs_kernel.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("Input core");
MODULE_LICENSE("GPL");
+EXPORT_SYMBOL(input_allocate_device);
EXPORT_SYMBOL(input_register_device);
EXPORT_SYMBOL(input_unregister_device);
EXPORT_SYMBOL(input_register_handler);
@@ -39,7 +39,7 @@
EXPORT_SYMBOL(input_accept_process);
EXPORT_SYMBOL(input_flush_device);
EXPORT_SYMBOL(input_event);
-EXPORT_SYMBOL(input_class);
+EXPORT_SYMBOL_GPL(input_class);
#define INPUT_DEVICES 256
@@ -316,124 +316,21 @@
return NULL;
}
-
-/*
- * Input hotplugging interface - loading event handlers based on
- * device bitfields.
- */
-
-#ifdef CONFIG_HOTPLUG
-
-/*
- * Input hotplugging invokes what /proc/sys/kernel/hotplug says
- * (normally /sbin/hotplug) when input devices get added or removed.
- *
- * This invokes a user mode policy agent, typically helping to load driver
- * or other modules, configure the device, and more. Drivers can provide
- * a MODULE_DEVICE_TABLE to help with module loading subtasks.
- *
- */
-
-#define SPRINTF_BIT_A(bit, name, max) \
- do { \
- envp[i++] = scratch; \
- scratch += sprintf(scratch, name); \
- for (j = NBITS(max) - 1; j >= 0; j--) \
- if (dev->bit[j]) break; \
- for (; j >= 0; j--) \
- scratch += sprintf(scratch, "%lx ", dev->bit[j]); \
- scratch++; \
- } while (0)
-
-#define SPRINTF_BIT_A2(bit, name, max, ev) \
- do { \
- if (test_bit(ev, dev->evbit)) \
- SPRINTF_BIT_A(bit, name, max); \
- } while (0)
-
-static void input_call_hotplug(char *verb, struct input_dev *dev)
+static int input_print_bitmap(char *buf, int buf_size, unsigned long *bitmap, int max)
{
- char *argv[3], **envp, *buf, *scratch;
- int i = 0, j, value;
+ int i;
+ int len = 0;
- if (!hotplug_path[0]) {
- printk(KERN_ERR "input.c: calling hotplug without a hotplug agent defined\n");
- return;
- }
- if (in_interrupt()) {
- printk(KERN_ERR "input.c: calling hotplug from interrupt\n");
- return;
- }
- if (!current->fs->root) {
- printk(KERN_WARNING "input.c: calling hotplug without valid filesystem\n");
- return;
- }
- if (!(envp = (char **) kmalloc(20 * sizeof(char *), GFP_KERNEL))) {
- printk(KERN_ERR "input.c: not enough memory allocating hotplug environment\n");
- return;
- }
- if (!(buf = kmalloc(1024, GFP_KERNEL))) {
- kfree (envp);
- printk(KERN_ERR "input.c: not enough memory allocating hotplug environment\n");
- return;
- }
+ for (i = NBITS(max) - 1; i > 0; i--)
+ if (bitmap[i])
+ break;
- argv[0] = hotplug_path;
- argv[1] = "input";
- argv[2] = NULL;
-
- envp[i++] = "HOME=/";
- envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
-
- scratch = buf;
-
- envp[i++] = scratch;
- scratch += sprintf(scratch, "ACTION=%s", verb) + 1;
-
- envp[i++] = scratch;
- scratch += sprintf(scratch, "PRODUCT=%x/%x/%x/%x",
- dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version) + 1;
-
- if (dev->name) {
- envp[i++] = scratch;
- scratch += sprintf(scratch, "NAME=%s", dev->name) + 1;
- }
-
- if (dev->phys) {
- envp[i++] = scratch;
- scratch += sprintf(scratch, "PHYS=%s", dev->phys) + 1;
- }
-
- SPRINTF_BIT_A(evbit, "EV=", EV_MAX);
- SPRINTF_BIT_A2(keybit, "KEY=", KEY_MAX, EV_KEY);
- SPRINTF_BIT_A2(relbit, "REL=", REL_MAX, EV_REL);
- SPRINTF_BIT_A2(absbit, "ABS=", ABS_MAX, EV_ABS);
- SPRINTF_BIT_A2(mscbit, "MSC=", MSC_MAX, EV_MSC);
- SPRINTF_BIT_A2(ledbit, "LED=", LED_MAX, EV_LED);
- SPRINTF_BIT_A2(sndbit, "SND=", SND_MAX, EV_SND);
- SPRINTF_BIT_A2(ffbit, "FF=", FF_MAX, EV_FF);
- SPRINTF_BIT_A2(swbit, "SW=", SW_MAX, EV_SW);
-
- envp[i++] = NULL;
-
-#ifdef INPUT_DEBUG
- printk(KERN_DEBUG "input.c: calling %s %s [%s %s %s %s %s]\n",
- argv[0], argv[1], envp[0], envp[1], envp[2], envp[3], envp[4]);
-#endif
-
- value = call_usermodehelper(argv [0], argv, envp, 0);
-
- kfree(buf);
- kfree(envp);
-
-#ifdef INPUT_DEBUG
- if (value != 0)
- printk(KERN_DEBUG "input.c: hotplug returned %d\n", value);
-#endif
+ for (; i >= 0; i--)
+ len += snprintf(buf + len, max(buf_size - len, 0),
+ "%lx%s", bitmap[i], i > 0 ? " " : "");
+ return len;
}
-#endif
-
#ifdef CONFIG_PROC_FS
static struct proc_dir_entry *proc_bus_input_dir;
@@ -455,37 +352,39 @@
return 0;
}
-#define SPRINTF_BIT_B(bit, name, max) \
- do { \
- len += sprintf(buf + len, "B: %s", name); \
- for (i = NBITS(max) - 1; i >= 0; i--) \
- if (dev->bit[i]) break; \
- for (; i >= 0; i--) \
- len += sprintf(buf + len, "%lx ", dev->bit[i]); \
- len += sprintf(buf + len, "\n"); \
+#define SPRINTF_BIT(ev, bm) \
+ do { \
+ len += sprintf(buf + len, "B: %s=", #ev); \
+ len += input_print_bitmap(buf + len, INT_MAX, \
+ dev->bm##bit, ev##_MAX); \
+ len += sprintf(buf + len, "\n"); \
} while (0)
-#define SPRINTF_BIT_B2(bit, name, max, ev) \
- do { \
- if (test_bit(ev, dev->evbit)) \
- SPRINTF_BIT_B(bit, name, max); \
+#define TEST_AND_SPRINTF_BIT(ev, bm) \
+ do { \
+ if (test_bit(EV_##ev, dev->evbit)) \
+ SPRINTF_BIT(ev, bm); \
} while (0)
static int input_devices_read(char *buf, char **start, off_t pos, int count, int *eof, void *data)
{
struct input_dev *dev;
struct input_handle *handle;
+ const char *path;
off_t at = 0;
- int i, len, cnt = 0;
+ int len, cnt = 0;
list_for_each_entry(dev, &input_dev_list, node) {
+ path = dev->dynalloc ? kobject_get_path(&dev->cdev.kobj, GFP_KERNEL) : NULL;
+
len = sprintf(buf, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n",
dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version);
len += sprintf(buf + len, "N: Name=\"%s\"\n", dev->name ? dev->name : "");
len += sprintf(buf + len, "P: Phys=%s\n", dev->phys ? dev->phys : "");
+ len += sprintf(buf + len, "S: Sysfs=%s\n", path ? path : "");
len += sprintf(buf + len, "H: Handlers=");
list_for_each_entry(handle, &dev->h_list, d_node)
@@ -493,15 +392,15 @@
len += sprintf(buf + len, "\n");
- SPRINTF_BIT_B(evbit, "EV=", EV_MAX);
- SPRINTF_BIT_B2(keybit, "KEY=", KEY_MAX, EV_KEY);
- SPRINTF_BIT_B2(relbit, "REL=", REL_MAX, EV_REL);
- SPRINTF_BIT_B2(absbit, "ABS=", ABS_MAX, EV_ABS);
- SPRINTF_BIT_B2(mscbit, "MSC=", MSC_MAX, EV_MSC);
- SPRINTF_BIT_B2(ledbit, "LED=", LED_MAX, EV_LED);
- SPRINTF_BIT_B2(sndbit, "SND=", SND_MAX, EV_SND);
- SPRINTF_BIT_B2(ffbit, "FF=", FF_MAX, EV_FF);
- SPRINTF_BIT_B2(swbit, "SW=", SW_MAX, EV_SW);
+ SPRINTF_BIT(EV, ev);
+ TEST_AND_SPRINTF_BIT(KEY, key);
+ TEST_AND_SPRINTF_BIT(REL, rel);
+ TEST_AND_SPRINTF_BIT(ABS, abs);
+ TEST_AND_SPRINTF_BIT(MSC, msc);
+ TEST_AND_SPRINTF_BIT(LED, led);
+ TEST_AND_SPRINTF_BIT(SND, snd);
+ TEST_AND_SPRINTF_BIT(FF, ff);
+ TEST_AND_SPRINTF_BIT(SW, sw);
len += sprintf(buf + len, "\n");
@@ -516,6 +415,8 @@
if (cnt >= count)
break;
}
+
+ kfree(path);
}
if (&dev->node == &input_dev_list)
@@ -606,6 +507,240 @@
static inline void input_proc_exit(void) { }
#endif
+#define INPUT_DEV_STRING_ATTR_SHOW(name) \
+static ssize_t input_dev_show_##name(struct class_device *dev, char *buf) \
+{ \
+ struct input_dev *input_dev = to_input_dev(dev); \
+ int retval; \
+ \
+ retval = down_interruptible(&input_dev->sem); \
+ if (retval) \
+ return retval; \
+ \
+ retval = sprintf(buf, "%s\n", input_dev->name ? input_dev->name : ""); \
+ \
+ up(&input_dev->sem); \
+ \
+ return retval; \
+} \
+static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_##name, NULL);
+
+INPUT_DEV_STRING_ATTR_SHOW(name);
+INPUT_DEV_STRING_ATTR_SHOW(phys);
+INPUT_DEV_STRING_ATTR_SHOW(uniq);
+
+static struct attribute *input_dev_attrs[] = {
+ &class_device_attr_name.attr,
+ &class_device_attr_phys.attr,
+ &class_device_attr_uniq.attr,
+ NULL
+};
+
+static struct attribute_group input_dev_group = {
+ .attrs = input_dev_attrs,
+};
+
+#define INPUT_DEV_ID_ATTR(name) \
+static ssize_t input_dev_show_id_##name(struct class_device *dev, char *buf) \
+{ \
+ struct input_dev *input_dev = to_input_dev(dev); \
+ return sprintf(buf, "%04x\n", input_dev->id.name); \
+} \
+static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_id_##name, NULL);
+
+INPUT_DEV_ID_ATTR(bustype);
+INPUT_DEV_ID_ATTR(vendor);
+INPUT_DEV_ID_ATTR(product);
+INPUT_DEV_ID_ATTR(version);
+
+static struct attribute *input_dev_id_attrs[] = {
+ &class_device_attr_bustype.attr,
+ &class_device_attr_vendor.attr,
+ &class_device_attr_product.attr,
+ &class_device_attr_version.attr,
+ NULL
+};
+
+static struct attribute_group input_dev_id_attr_group = {
+ .name = "id",
+ .attrs = input_dev_id_attrs,
+};
+
+#define INPUT_DEV_CAP_ATTR(ev, bm) \
+static ssize_t input_dev_show_cap_##bm(struct class_device *dev, char *buf) \
+{ \
+ struct input_dev *input_dev = to_input_dev(dev); \
+ return input_print_bitmap(buf, PAGE_SIZE, input_dev->bm##bit, ev##_MAX);\
+} \
+static CLASS_DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL);
+
+INPUT_DEV_CAP_ATTR(EV, ev);
+INPUT_DEV_CAP_ATTR(KEY, key);
+INPUT_DEV_CAP_ATTR(REL, rel);
+INPUT_DEV_CAP_ATTR(ABS, abs);
+INPUT_DEV_CAP_ATTR(MSC, msc);
+INPUT_DEV_CAP_ATTR(LED, led);
+INPUT_DEV_CAP_ATTR(SND, snd);
+INPUT_DEV_CAP_ATTR(FF, ff);
+INPUT_DEV_CAP_ATTR(SW, sw);
+
+static struct attribute *input_dev_caps_attrs[] = {
+ &class_device_attr_ev.attr,
+ &class_device_attr_key.attr,
+ &class_device_attr_rel.attr,
+ &class_device_attr_abs.attr,
+ &class_device_attr_msc.attr,
+ &class_device_attr_led.attr,
+ &class_device_attr_snd.attr,
+ &class_device_attr_ff.attr,
+ &class_device_attr_sw.attr,
+ NULL
+};
+
+static struct attribute_group input_dev_caps_attr_group = {
+ .name = "capabilities",
+ .attrs = input_dev_caps_attrs,
+};
+
+static void input_dev_release(struct class_device *class_dev)
+{
+ struct input_dev *dev = to_input_dev(class_dev);
+
+ kfree(dev);
+ module_put(THIS_MODULE);
+}
+
+/*
+ * Input hotplugging interface - loading event handlers based on
+ * device bitfields.
+ */
+static int input_add_hotplug_bm_var(char **envp, int num_envp, int *cur_index,
+ char *buffer, int buffer_size, int *cur_len,
+ const char *name, unsigned long *bitmap, int max)
+{
+ if (*cur_index >= num_envp - 1)
+ return -ENOMEM;
+
+ envp[*cur_index] = buffer + *cur_len;
+
+ *cur_len += snprintf(buffer + *cur_len, max(buffer_size - *cur_len, 0), name);
+ if (*cur_len > buffer_size)
+ return -ENOMEM;
+
+ *cur_len += input_print_bitmap(buffer + *cur_len,
+ max(buffer_size - *cur_len, 0),
+ bitmap, max) + 1;
+ if (*cur_len > buffer_size)
+ return -ENOMEM;
+
+ (*cur_index)++;
+ return 0;
+}
+
+#define INPUT_ADD_HOTPLUG_VAR(fmt, val...) \
+ do { \
+ int err = add_hotplug_env_var(envp, num_envp, &i, \
+ buffer, buffer_size, &len, \
+ fmt, val); \
+ if (err) \
+ return err; \
+ } while (0)
+
+#define INPUT_ADD_HOTPLUG_BM_VAR(name, bm, max) \
+ do { \
+ int err = input_add_hotplug_bm_var(envp, num_envp, &i, \
+ buffer, buffer_size, &len, \
+ name, bm, max); \
+ if (err) \
+ return err; \
+ } while (0)
+
+static int input_dev_hotplug(struct class_device *cdev, char **envp,
+ int num_envp, char *buffer, int buffer_size)
+{
+ struct input_dev *dev = to_input_dev(cdev);
+ int i = 0;
+ int len = 0;
+
+ INPUT_ADD_HOTPLUG_VAR("PRODUCT=%x/%x/%x/%x",
+ dev->id.bustype, dev->id.vendor,
+ dev->id.product, dev->id.version);
+ if (dev->name)
+ INPUT_ADD_HOTPLUG_VAR("NAME=\"%s\"", dev->name);
+ if (dev->phys)
+ INPUT_ADD_HOTPLUG_VAR("PHYS=\"%s\"", dev->phys);
+ if (dev->phys)
+ INPUT_ADD_HOTPLUG_VAR("UNIQ=\"%s\"", dev->uniq);
+
+ INPUT_ADD_HOTPLUG_BM_VAR("EV=", dev->evbit, EV_MAX);
+ if (test_bit(EV_KEY, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("KEY=", dev->keybit, KEY_MAX);
+ if (test_bit(EV_REL, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("REL=", dev->relbit, REL_MAX);
+ if (test_bit(EV_ABS, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("ABS=", dev->absbit, ABS_MAX);
+ if (test_bit(EV_MSC, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("MSC=", dev->mscbit, MSC_MAX);
+ if (test_bit(EV_LED, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("LED=", dev->ledbit, LED_MAX);
+ if (test_bit(EV_SND, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("SND=", dev->sndbit, SND_MAX);
+ if (test_bit(EV_FF, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("FF=", dev->ffbit, FF_MAX);
+ if (test_bit(EV_SW, dev->evbit))
+ INPUT_ADD_HOTPLUG_BM_VAR("SW=", dev->swbit, SW_MAX);
+
+ envp[i] = NULL;
+
+ return 0;
+}
+
+struct class input_class = {
+ .name = "input",
+ .release = input_dev_release,
+ .hotplug = input_dev_hotplug,
+};
+
+struct input_dev *input_allocate_device(void)
+{
+ struct input_dev *dev;
+
+ dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL);
+ if (dev) {
+ dev->dynalloc = 1;
+ dev->cdev.class = &input_class;
+ class_device_initialize(&dev->cdev);
+ INIT_LIST_HEAD(&dev->h_list);
+ INIT_LIST_HEAD(&dev->node);
+ }
+
+ return dev;
+}
+
+static void input_register_classdevice(struct input_dev *dev)
+{
+ static atomic_t input_no = ATOMIC_INIT(0);
+ const char *path;
+
+ __module_get(THIS_MODULE);
+
+ dev->dev = dev->cdev.dev;
+
+ snprintf(dev->cdev.class_id, sizeof(dev->cdev.class_id),
+ "input%ld", (unsigned long) atomic_inc_return(&input_no) - 1);
+
+ path = kobject_get_path(&dev->cdev.class->subsys.kset.kobj, GFP_KERNEL);
+ printk(KERN_INFO "input: %s/%s as %s\n",
+ dev->name ? dev->name : "Unspecified device",
+ path ? path : "", dev->cdev.class_id);
+ kfree(path);
+
+ class_device_add(&dev->cdev);
+ sysfs_create_group(&dev->cdev.kobj, &input_dev_group);
+ sysfs_create_group(&dev->cdev.kobj, &input_dev_id_attr_group);
+ sysfs_create_group(&dev->cdev.kobj, &input_dev_caps_attr_group);
+}
+
void input_register_device(struct input_dev *dev)
{
struct input_handle *handle;
@@ -632,15 +767,15 @@
INIT_LIST_HEAD(&dev->h_list);
list_add_tail(&dev->node, &input_dev_list);
+ if (dev->dynalloc)
+ input_register_classdevice(dev);
+
list_for_each_entry(handler, &input_handler_list, node)
if (!handler->blacklist || !input_match_device(handler->blacklist, dev))
if ((id = input_match_device(handler->id_table, dev)))
if ((handle = handler->connect(handler, dev, id)))
input_link_handle(handle);
-#ifdef CONFIG_HOTPLUG
- input_call_hotplug("add", dev);
-#endif
input_wakeup_procfs_readers();
}
@@ -660,12 +795,14 @@
handle->handler->disconnect(handle);
}
-#ifdef CONFIG_HOTPLUG
- input_call_hotplug("remove", dev);
-#endif
-
list_del_init(&dev->node);
+ if (dev->dynalloc) {
+ sysfs_remove_group(&dev->cdev.kobj, &input_dev_caps_attr_group);
+ sysfs_remove_group(&dev->cdev.kobj, &input_dev_id_attr_group);
+ class_device_unregister(&dev->cdev);
+ }
+
input_wakeup_procfs_readers();
}
@@ -748,16 +885,14 @@
.open = input_open_file,
};
-struct class *input_class;
-
static int __init input_init(void)
{
int err;
- input_class = class_create(THIS_MODULE, "input");
- if (IS_ERR(input_class)) {
- printk(KERN_ERR "input: unable to register input class\n");
- return PTR_ERR(input_class);
+ err = class_register(&input_class);
+ if (err) {
+ printk(KERN_ERR "input: unable to register input_dev class\n");
+ return err;
}
err = input_proc_init();
@@ -770,24 +905,18 @@
goto fail2;
}
- err = devfs_mk_dir("input");
- if (err)
- goto fail3;
-
return 0;
- fail3: unregister_chrdev(INPUT_MAJOR, "input");
fail2: input_proc_exit();
- fail1: class_destroy(input_class);
+ fail1: class_unregister(&input_class);
return err;
}
static void __exit input_exit(void)
{
input_proc_exit();
- devfs_remove("input");
unregister_chrdev(INPUT_MAJOR, "input");
- class_destroy(input_class);
+ class_unregister(&input_class);
}
subsys_initcall(input_init);
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index e0938d1..20e2972 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -26,7 +26,6 @@
#include <linux/init.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
-#include <linux/devfs_fs_kernel.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Joystick device interfaces");
@@ -449,6 +448,7 @@
static struct input_handle *joydev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id)
{
struct joydev *joydev;
+ struct class_device *cdev;
int i, j, t, minor;
for (minor = 0; minor < JOYDEV_MINORS && joydev_table[minor]; minor++);
@@ -514,11 +514,13 @@
joydev_table[minor] = joydev;
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/js%d", minor);
- class_device_create(input_class,
+ cdev = class_device_create(&input_class, &dev->cdev,
MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor),
- dev->dev, "js%d", minor);
+ dev->cdev.dev, joydev->name);
+
+ /* temporary symlink to keep userspace happy */
+ sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj,
+ joydev->name);
return &joydev->handle;
}
@@ -528,8 +530,8 @@
struct joydev *joydev = handle->private;
struct joydev_list *list;
- class_device_destroy(input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor));
- devfs_remove("input/js%d", joydev->minor);
+ sysfs_remove_link(&input_class.subsys.kset.kobj, joydev->name);
+ class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor));
joydev->exist = 0;
if (joydev->open) {
diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c
index cf35ae6..9d95459 100644
--- a/drivers/input/joystick/adi.c
+++ b/drivers/input/joystick/adi.c
@@ -54,7 +54,7 @@
#define ADI_MIN_LENGTH 8
#define ADI_MIN_LEN_LENGTH 10
#define ADI_MIN_ID_LENGTH 66
-#define ADI_MAX_NAME_LENGTH 48
+#define ADI_MAX_NAME_LENGTH 64
#define ADI_MAX_CNAME_LENGTH 16
#define ADI_MAX_PHYS_LENGTH 64
@@ -106,7 +106,7 @@
*/
struct adi {
- struct input_dev dev;
+ struct input_dev *dev;
int length;
int ret;
int idx;
@@ -215,7 +215,7 @@
static int adi_decode(struct adi *adi)
{
- struct input_dev *dev = &adi->dev;
+ struct input_dev *dev = adi->dev;
char *abs = adi->abs;
short *key = adi->key;
int i, t;
@@ -318,7 +318,8 @@
for (i = 0; seq[i]; i++) {
gameport_trigger(gameport);
- if (seq[i] > 0) msleep(seq[i]);
+ if (seq[i] > 0)
+ msleep(seq[i]);
if (seq[i] < 0) {
mdelay(-seq[i]);
udelay(-seq[i]*14); /* It looks like mdelay() is off by approx 1.4% */
@@ -397,42 +398,46 @@
}
}
-static void adi_init_input(struct adi *adi, struct adi_port *port, int half)
+static int adi_init_input(struct adi *adi, struct adi_port *port, int half)
{
- int i, t;
+ struct input_dev *input_dev;
char buf[ADI_MAX_NAME_LENGTH];
+ int i, t;
- if (!adi->length) return;
-
- init_input_dev(&adi->dev);
+ adi->dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
t = adi->id < ADI_ID_MAX ? adi->id : ADI_ID_MAX;
snprintf(buf, ADI_MAX_PHYS_LENGTH, adi_names[t], adi->id);
- snprintf(adi->name, ADI_MAX_NAME_LENGTH, "Logitech %s", buf);
+ snprintf(adi->name, ADI_MAX_NAME_LENGTH, "Logitech %s [%s]", buf, adi->cname);
snprintf(adi->phys, ADI_MAX_PHYS_LENGTH, "%s/input%d", port->gameport->phys, half);
adi->abs = adi_abs[t];
adi->key = adi_key[t];
- adi->dev.open = adi_open;
- adi->dev.close = adi_close;
+ input_dev->name = adi->name;
+ input_dev->phys = adi->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_LOGITECH;
+ input_dev->id.product = adi->id;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &port->gameport->dev;
+ input_dev->private = port;
- adi->dev.name = adi->name;
- adi->dev.phys = adi->phys;
- adi->dev.id.bustype = BUS_GAMEPORT;
- adi->dev.id.vendor = GAMEPORT_ID_VENDOR_LOGITECH;
- adi->dev.id.product = adi->id;
- adi->dev.id.version = 0x0100;
+ input_dev->open = adi_open;
+ input_dev->close = adi_close;
- adi->dev.private = port;
- adi->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++)
- set_bit(adi->abs[i], adi->dev.absbit);
+ set_bit(adi->abs[i], input_dev->absbit);
for (i = 0; i < adi->buttons; i++)
- set_bit(adi->key[i], adi->dev.keybit);
+ set_bit(adi->key[i], input_dev->keybit);
+
+ return 0;
}
static void adi_init_center(struct adi *adi)
@@ -445,17 +450,17 @@
for (i = 0; i < adi->axes10 + adi->axes8 + (adi->hats + (adi->pad != -1)) * 2; i++) {
t = adi->abs[i];
- x = adi->dev.abs[t];
+ x = adi->dev->abs[t];
if (t == ABS_THROTTLE || t == ABS_RUDDER || adi->id == ADI_ID_WGPE)
x = i < adi->axes10 ? 512 : 128;
if (i < adi->axes10)
- input_set_abs_params(&adi->dev, t, 64, x * 2 - 64, 2, 16);
+ input_set_abs_params(adi->dev, t, 64, x * 2 - 64, 2, 16);
else if (i < adi->axes10 + adi->axes8)
- input_set_abs_params(&adi->dev, t, 48, x * 2 - 48, 1, 16);
+ input_set_abs_params(adi->dev, t, 48, x * 2 - 48, 1, 16);
else
- input_set_abs_params(&adi->dev, t, -1, 1, 0, 0);
+ input_set_abs_params(adi->dev, t, -1, 1, 0, 0);
}
}
@@ -469,7 +474,8 @@
int i;
int err;
- if (!(port = kzalloc(sizeof(struct adi_port), GFP_KERNEL)))
+ port = kzalloc(sizeof(struct adi_port), GFP_KERNEL);
+ if (!port)
return -ENOMEM;
port->gameport = gameport;
@@ -477,10 +483,8 @@
gameport_set_drvdata(gameport, port);
err = gameport_open(gameport, drv, GAMEPORT_MODE_RAW);
- if (err) {
- kfree(port);
- return err;
- }
+ if (err)
+ goto fail1;
adi_init_digital(gameport);
adi_read_packet(port);
@@ -490,13 +494,18 @@
for (i = 0; i < 2; i++) {
adi_id_decode(port->adi + i, port);
- adi_init_input(port->adi + i, port, i);
+
+ if (!port->adi[i].length)
+ continue;
+
+ err = adi_init_input(port->adi + i, port, i);
+ if (err)
+ goto fail2;
}
if (!port->adi[0].length && !port->adi[1].length) {
- gameport_close(gameport);
- kfree(port);
- return -ENODEV;
+ err = -ENODEV;
+ goto fail2;
}
gameport_set_poll_handler(gameport, adi_poll);
@@ -511,12 +520,18 @@
for (i = 0; i < 2; i++)
if (port->adi[i].length > 0) {
adi_init_center(port->adi + i);
- input_register_device(&port->adi[i].dev);
- printk(KERN_INFO "input: %s [%s] on %s\n",
- port->adi[i].name, port->adi[i].cname, gameport->phys);
+ input_register_device(port->adi[i].dev);
}
return 0;
+
+ fail2: for (i = 0; i < 2; i++)
+ if (port->adi[i].dev)
+ input_free_device(port->adi[i].dev);
+ gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
+ kfree(port);
+ return err;
}
static void adi_disconnect(struct gameport *gameport)
@@ -526,7 +541,7 @@
for (i = 0; i < 2; i++)
if (port->adi[i].length > 0)
- input_unregister_device(&port->adi[i].dev);
+ input_unregister_device(port->adi[i].dev);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(port);
diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c
index e996183..8558a99 100644
--- a/drivers/input/joystick/amijoy.c
+++ b/drivers/input/joystick/amijoy.c
@@ -53,11 +53,9 @@
static int amijoy_used;
static DECLARE_MUTEX(amijoy_sem);
-static struct input_dev amijoy_dev[2];
+static struct input_dev *amijoy_dev[2];
static char *amijoy_phys[2] = { "amijoy/input0", "amijoy/input1" };
-static char *amijoy_name = "Amiga joystick";
-
static irqreturn_t amijoy_interrupt(int irq, void *dummy, struct pt_regs *fp)
{
int i, data = 0, button = 0;
@@ -70,15 +68,15 @@
case 1: data = ~custom.joy1dat; button = (~ciaa.pra >> 7) & 1; break;
}
- input_regs(amijoy_dev + i, fp);
+ input_regs(amijoy_dev[i], fp);
- input_report_key(amijoy_dev + i, BTN_TRIGGER, button);
+ input_report_key(amijoy_dev[i], BTN_TRIGGER, button);
- input_report_abs(amijoy_dev + i, ABS_X, ((data >> 1) & 1) - ((data >> 9) & 1));
+ input_report_abs(amijoy_dev[i], ABS_X, ((data >> 1) & 1) - ((data >> 9) & 1));
data = ~(data ^ (data << 1));
- input_report_abs(amijoy_dev + i, ABS_Y, ((data >> 1) & 1) - ((data >> 9) & 1));
+ input_report_abs(amijoy_dev[i], ABS_Y, ((data >> 1) & 1) - ((data >> 9) & 1));
- input_sync(amijoy_dev + i);
+ input_sync(amijoy_dev[i]);
}
return IRQ_HANDLED;
}
@@ -114,39 +112,52 @@
static int __init amijoy_init(void)
{
int i, j;
+ int err;
- for (i = 0; i < 2; i++)
- if (amijoy[i]) {
- if (!request_mem_region(CUSTOM_PHYSADDR+10+i*2, 2,
- "amijoy [Denise]")) {
- if (i == 1 && amijoy[0]) {
- input_unregister_device(amijoy_dev);
- release_mem_region(CUSTOM_PHYSADDR+10, 2);
- }
- return -EBUSY;
- }
+ for (i = 0; i < 2; i++) {
+ if (!amijoy[i])
+ continue;
- amijoy_dev[i].open = amijoy_open;
- amijoy_dev[i].close = amijoy_close;
- amijoy_dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- amijoy_dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
- amijoy_dev[i].keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- for (j = 0; j < 2; j++) {
- amijoy_dev[i].absmin[ABS_X + j] = -1;
- amijoy_dev[i].absmax[ABS_X + j] = 1;
- }
-
- amijoy_dev[i].name = amijoy_name;
- amijoy_dev[i].phys = amijoy_phys[i];
- amijoy_dev[i].id.bustype = BUS_AMIGA;
- amijoy_dev[i].id.vendor = 0x0001;
- amijoy_dev[i].id.product = 0x0003;
- amijoy_dev[i].id.version = 0x0100;
-
- input_register_device(amijoy_dev + i);
- printk(KERN_INFO "input: %s at joy%ddat\n", amijoy_name, i);
+ amijoy_dev[i] = input_allocate_device();
+ if (!amijoy_dev[i]) {
+ err = -ENOMEM;
+ goto fail;
}
+
+ if (!request_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2, "amijoy [Denise]")) {
+ input_free_device(amijoy_dev[i]);
+ err = -EBUSY;
+ goto fail;
+ }
+
+ amijoy_dev[i]->name = "Amiga joystick";
+ amijoy_dev[i]->phys = amijoy_phys[i];
+ amijoy_dev[i]->id.bustype = BUS_AMIGA;
+ amijoy_dev[i]->id.vendor = 0x0001;
+ amijoy_dev[i]->id.product = 0x0003;
+ amijoy_dev[i]->id.version = 0x0100;
+
+ amijoy_dev[i]->open = amijoy_open;
+ amijoy_dev[i]->close = amijoy_close;
+
+ amijoy_dev[i]->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ amijoy_dev[i]->absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+ amijoy_dev[i]->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ for (j = 0; j < 2; j++) {
+ amijoy_dev[i]->absmin[ABS_X + j] = -1;
+ amijoy_dev[i]->absmax[ABS_X + j] = 1;
+ }
+
+ input_register_device(amijoy_dev[i]);
+ }
return 0;
+
+ fail: while (--i >= 0)
+ if (amijoy[i]) {
+ input_unregister_device(amijoy_dev[i]);
+ release_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2);
+ }
+ return err;
}
static void __exit amijoy_exit(void)
@@ -155,8 +166,8 @@
for (i = 0; i < 2; i++)
if (amijoy[i]) {
- input_unregister_device(amijoy_dev + i);
- release_mem_region(CUSTOM_PHYSADDR+10+i*2, 2);
+ input_unregister_device(amijoy_dev[i]);
+ release_mem_region(CUSTOM_PHYSADDR + 10 + i * 2, 2);
}
}
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index 64b1313..c75ac6e 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -111,7 +111,7 @@
static unsigned char analog_chf[] = { 0xf, 0x0, 0x1, 0x9, 0x2, 0x4, 0xc, 0x8, 0x3, 0x5, 0xb, 0x7, 0xd, 0xe, 0xa, 0x6 };
struct analog {
- struct input_dev dev;
+ struct input_dev *dev;
int mask;
short *buttons;
char name[ANALOG_MAX_NAME_LENGTH];
@@ -182,7 +182,7 @@
static void analog_decode(struct analog *analog, int *axes, int *initial, int buttons)
{
- struct input_dev *dev = &analog->dev;
+ struct input_dev *dev = analog->dev;
int i, j;
if (analog->mask & ANALOG_HAT_FCS)
@@ -428,27 +428,30 @@
* analog_init_device()
*/
-static void analog_init_device(struct analog_port *port, struct analog *analog, int index)
+static int analog_init_device(struct analog_port *port, struct analog *analog, int index)
{
+ struct input_dev *input_dev;
int i, j, t, v, w, x, y, z;
analog_name(analog);
sprintf(analog->phys, "%s/input%d", port->gameport->phys, index);
analog->buttons = (analog->mask & ANALOG_GAMEPAD) ? analog_pad_btn : analog_joy_btn;
- init_input_dev(&analog->dev);
+ analog->dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
- analog->dev.name = analog->name;
- analog->dev.phys = analog->phys;
- analog->dev.id.bustype = BUS_GAMEPORT;
- analog->dev.id.vendor = GAMEPORT_ID_VENDOR_ANALOG;
- analog->dev.id.product = analog->mask >> 4;
- analog->dev.id.version = 0x0100;
+ input_dev->name = analog->name;
+ input_dev->phys = analog->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_ANALOG;
+ input_dev->id.product = analog->mask >> 4;
+ input_dev->id.version = 0x0100;
- analog->dev.open = analog_open;
- analog->dev.close = analog_close;
- analog->dev.private = port;
- analog->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->open = analog_open;
+ input_dev->close = analog_close;
+ input_dev->private = port;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = j = 0; i < 4; i++)
if (analog->mask & (1 << i)) {
@@ -461,8 +464,6 @@
v = (x >> 3);
w = (x >> 3);
- set_bit(t, analog->dev.absbit);
-
if ((i == 2 || i == 3) && (j == 2 || j == 3) && (z > (y >> 3)))
x = y;
@@ -472,11 +473,7 @@
w = (x >> 4);
}
- analog->dev.absmax[t] = (x << 1) - v;
- analog->dev.absmin[t] = v;
- analog->dev.absfuzz[t] = port->fuzz;
- analog->dev.absflat[t] = w;
-
+ input_set_abs_params(input_dev, t, v, (x << 1) - v, port->fuzz, w);
j++;
}
@@ -484,41 +481,30 @@
if (analog->mask & analog_exts[i])
for (x = 0; x < 2; x++) {
t = analog_hats[j++];
- set_bit(t, analog->dev.absbit);
- analog->dev.absmax[t] = 1;
- analog->dev.absmin[t] = -1;
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
}
for (i = j = 0; i < 4; i++)
if (analog->mask & (0x10 << i))
- set_bit(analog->buttons[j++], analog->dev.keybit);
+ set_bit(analog->buttons[j++], input_dev->keybit);
if (analog->mask & ANALOG_BTNS_CHF)
for (i = 0; i < 2; i++)
- set_bit(analog->buttons[j++], analog->dev.keybit);
+ set_bit(analog->buttons[j++], input_dev->keybit);
if (analog->mask & ANALOG_HBTN_CHF)
for (i = 0; i < 4; i++)
- set_bit(analog->buttons[j++], analog->dev.keybit);
+ set_bit(analog->buttons[j++], input_dev->keybit);
for (i = 0; i < 4; i++)
if (analog->mask & (ANALOG_BTN_TL << i))
- set_bit(analog_pads[i], analog->dev.keybit);
+ set_bit(analog_pads[i], input_dev->keybit);
analog_decode(analog, port->axes, port->initial, port->buttons);
- input_register_device(&analog->dev);
+ input_register_device(analog->dev);
- printk(KERN_INFO "input: %s at %s", analog->name, port->gameport->phys);
-
- if (port->cooked)
- printk(" [ADC port]\n");
- else
- printk(" [%s timer, %d %sHz clock, %d ns res]\n", TIME_NAME,
- port->speed > 10000 ? (port->speed + 800) / 1000 : port->speed,
- port->speed > 10000 ? "M" : "k",
- port->speed > 10000 ? (port->loop * 1000) / (port->speed / 1000)
- : (port->loop * 1000000) / port->speed);
+ return 0;
}
/*
@@ -659,37 +645,41 @@
return - ENOMEM;
err = analog_init_port(gameport, drv, port);
- if (err) {
- kfree(port);
- return err;
- }
+ if (err)
+ goto fail1;
err = analog_init_masks(port);
- if (err) {
- gameport_close(gameport);
- gameport_set_drvdata(gameport, NULL);
- kfree(port);
- return err;
- }
+ if (err)
+ goto fail2;
gameport_set_poll_handler(gameport, analog_poll);
gameport_set_poll_interval(gameport, 10);
for (i = 0; i < 2; i++)
- if (port->analog[i].mask)
- analog_init_device(port, port->analog + i, i);
+ if (port->analog[i].mask) {
+ err = analog_init_device(port, port->analog + i, i);
+ if (err)
+ goto fail3;
+ }
return 0;
+
+ fail3: while (--i >= 0)
+ input_unregister_device(port->analog[i].dev);
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
+ kfree(port);
+ return err;
}
static void analog_disconnect(struct gameport *gameport)
{
- int i;
struct analog_port *port = gameport_get_drvdata(gameport);
+ int i;
for (i = 0; i < 2; i++)
if (port->analog[i].mask)
- input_unregister_device(&port->analog[i].dev);
+ input_unregister_device(port->analog[i].dev);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
printk(KERN_INFO "analog.c: %d out of %d reads (%d%%) on %s failed\n",
diff --git a/drivers/input/joystick/cobra.c b/drivers/input/joystick/cobra.c
index 0b2e9fa..9a3dfc7 100644
--- a/drivers/input/joystick/cobra.c
+++ b/drivers/input/joystick/cobra.c
@@ -44,13 +44,11 @@
#define COBRA_MAX_STROBE 45 /* 45 us max wait for first strobe */
#define COBRA_LENGTH 36
-static char* cobra_name = "Creative Labs Blaster GamePad Cobra";
-
static int cobra_btn[] = { BTN_START, BTN_SELECT, BTN_TL, BTN_TR, BTN_X, BTN_Y, BTN_Z, BTN_A, BTN_B, BTN_C, BTN_TL2, BTN_TR2, 0 };
struct cobra {
struct gameport *gameport;
- struct input_dev dev[2];
+ struct input_dev *dev[2];
int reads;
int bads;
unsigned char exists;
@@ -128,7 +126,7 @@
for (i = 0; i < 2; i++)
if (cobra->exists & r & (1 << i)) {
- dev = cobra->dev + i;
+ dev = cobra->dev[i];
input_report_abs(dev, ABS_X, ((data[i] >> 4) & 1) - ((data[i] >> 3) & 1));
input_report_abs(dev, ABS_Y, ((data[i] >> 2) & 1) - ((data[i] >> 1) & 1));
@@ -159,11 +157,13 @@
static int cobra_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct cobra *cobra;
+ struct input_dev *input_dev;
unsigned int data[2];
int i, j;
int err;
- if (!(cobra = kzalloc(sizeof(struct cobra), GFP_KERNEL)))
+ cobra = kzalloc(sizeof(struct cobra), GFP_KERNEL);
+ if (!cobra)
return -ENOMEM;
cobra->gameport = gameport;
@@ -191,38 +191,46 @@
gameport_set_poll_handler(gameport, cobra_poll);
gameport_set_poll_interval(gameport, 20);
- for (i = 0; i < 2; i++)
- if ((cobra->exists >> i) & 1) {
+ for (i = 0; i < 2; i++) {
+ if (~(cobra->exists >> i) & 1)
+ continue;
- sprintf(cobra->phys[i], "%s/input%d", gameport->phys, i);
-
- cobra->dev[i].private = cobra;
- cobra->dev[i].open = cobra_open;
- cobra->dev[i].close = cobra_close;
-
- cobra->dev[i].name = cobra_name;
- cobra->dev[i].phys = cobra->phys[i];
- cobra->dev[i].id.bustype = BUS_GAMEPORT;
- cobra->dev[i].id.vendor = GAMEPORT_ID_VENDOR_CREATIVE;
- cobra->dev[i].id.product = 0x0008;
- cobra->dev[i].id.version = 0x0100;
-
- cobra->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- input_set_abs_params(&cobra->dev[i], ABS_X, -1, 1, 0, 0);
- input_set_abs_params(&cobra->dev[i], ABS_Y, -1, 1, 0, 0);
-
- for (j = 0; cobra_btn[j]; j++)
- set_bit(cobra_btn[j], cobra->dev[i].keybit);
-
- input_register_device(&cobra->dev[i]);
- printk(KERN_INFO "input: %s on %s\n", cobra_name, gameport->phys);
+ cobra->dev[i] = input_dev = input_allocate_device();
+ if (!input_dev) {
+ err = -ENOMEM;
+ goto fail3;
}
+ sprintf(cobra->phys[i], "%s/input%d", gameport->phys, i);
+
+ input_dev->name = "Creative Labs Blaster GamePad Cobra";
+ input_dev->phys = cobra->phys[i];
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_CREATIVE;
+ input_dev->id.product = 0x0008;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &gameport->dev;
+ input_dev->private = cobra;
+
+ input_dev->open = cobra_open;
+ input_dev->close = cobra_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_set_abs_params(input_dev, ABS_X, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, -1, 1, 0, 0);
+ for (j = 0; cobra_btn[j]; j++)
+ set_bit(cobra_btn[j], input_dev->keybit);
+
+ input_register_device(cobra->dev[i]);
+ }
+
return 0;
-fail2: gameport_close(gameport);
-fail1: gameport_set_drvdata(gameport, NULL);
+ fail3: for (i = 0; i < 2; i++)
+ if (cobra->dev[i])
+ input_unregister_device(cobra->dev[i]);
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
kfree(cobra);
return err;
}
@@ -234,7 +242,7 @@
for (i = 0; i < 2; i++)
if ((cobra->exists >> i) & 1)
- input_unregister_device(cobra->dev + i);
+ input_unregister_device(cobra->dev[i]);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(cobra);
diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c
index 2a3e4bb2..499344c 100644
--- a/drivers/input/joystick/db9.c
+++ b/drivers/input/joystick/db9.c
@@ -43,25 +43,28 @@
MODULE_DESCRIPTION("Atari, Amstrad, Commodore, Amiga, Sega, etc. joystick driver");
MODULE_LICENSE("GPL");
-static int db9[] __initdata = { -1, 0 };
-static int db9_nargs __initdata = 0;
-module_param_array_named(dev, db9, int, &db9_nargs, 0);
+struct db9_config {
+ int args[2];
+ int nargs;
+};
+
+#define DB9_MAX_PORTS 3
+static struct db9_config db9[DB9_MAX_PORTS] __initdata;
+
+module_param_array_named(dev, db9[0].args, int, &db9[0].nargs, 0);
MODULE_PARM_DESC(dev, "Describes first attached device (<parport#>,<type>)");
-
-static int db9_2[] __initdata = { -1, 0 };
-static int db9_nargs_2 __initdata = 0;
-module_param_array_named(dev2, db9_2, int, &db9_nargs_2, 0);
+module_param_array_named(dev2, db9[1].args, int, &db9[0].nargs, 0);
MODULE_PARM_DESC(dev2, "Describes second attached device (<parport#>,<type>)");
-
-static int db9_3[] __initdata = { -1, 0 };
-static int db9_nargs_3 __initdata = 0;
-module_param_array_named(dev3, db9_3, int, &db9_nargs_3, 0);
+module_param_array_named(dev3, db9[2].args, int, &db9[2].nargs, 0);
MODULE_PARM_DESC(dev3, "Describes third attached device (<parport#>,<type>)");
__obsolete_setup("db9=");
__obsolete_setup("db9_2=");
__obsolete_setup("db9_3=");
+#define DB9_ARG_PARPORT 0
+#define DB9_ARG_MODE 1
+
#define DB9_MULTI_STICK 0x01
#define DB9_MULTI2_STICK 0x02
#define DB9_GENESIS_PAD 0x03
@@ -87,40 +90,53 @@
#define DB9_NORMAL 0x0a
#define DB9_NOSELECT 0x08
-#define DB9_MAX_DEVICES 2
-
#define DB9_GENESIS6_DELAY 14
#define DB9_REFRESH_TIME HZ/100
+#define DB9_MAX_DEVICES 2
+
+struct db9_mode_data {
+ const char *name;
+ const short *buttons;
+ int n_buttons;
+ int n_pads;
+ int n_axis;
+ int bidirectional;
+ int reverse;
+};
+
struct db9 {
- struct input_dev dev[DB9_MAX_DEVICES];
+ struct input_dev *dev[DB9_MAX_DEVICES];
struct timer_list timer;
struct pardevice *pd;
int mode;
int used;
struct semaphore sem;
- char phys[2][32];
+ char phys[DB9_MAX_DEVICES][32];
};
static struct db9 *db9_base[3];
-static short db9_multi_btn[] = { BTN_TRIGGER, BTN_THUMB };
-static short db9_genesis_btn[] = { BTN_START, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_MODE };
-static short db9_cd32_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_START };
-
-static char db9_buttons[DB9_MAX_PAD] = { 0, 1, 2, 4, 0, 6, 8, 9, 1, 1, 7, 9, 9 };
-static short *db9_btn[DB9_MAX_PAD] = { NULL, db9_multi_btn, db9_multi_btn, db9_genesis_btn, NULL, db9_genesis_btn,
- db9_genesis_btn, db9_cd32_btn, db9_multi_btn, db9_multi_btn, db9_cd32_btn,
- db9_cd32_btn, db9_cd32_btn };
-static char *db9_name[DB9_MAX_PAD] = { NULL, "Multisystem joystick", "Multisystem joystick (2 fire)", "Genesis pad",
- NULL, "Genesis 5 pad", "Genesis 6 pad", "Saturn pad", "Multisystem (0.8.0.2) joystick",
- "Multisystem (0.8.0.2-dual) joystick", "Amiga CD-32 pad", "Saturn dpp", "Saturn dpp dual" };
-
-static const int db9_max_pads[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 6, 1, 2, 1, 6, 12 };
-static const int db9_num_axis[DB9_MAX_PAD] = { 0, 2, 2, 2, 0, 2, 2, 7, 2, 2, 2 ,7, 7 };
+static const short db9_multi_btn[] = { BTN_TRIGGER, BTN_THUMB };
+static const short db9_genesis_btn[] = { BTN_START, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_MODE };
+static const short db9_cd32_btn[] = { BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_TL, BTN_TR, BTN_START };
static const short db9_abs[] = { ABS_X, ABS_Y, ABS_RX, ABS_RY, ABS_RZ, ABS_Z, ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y };
-static const int db9_bidirectional[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 1, 0, 1, 1, 0, 0 };
-static const int db9_reverse[DB9_MAX_PAD] = { 0, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 0, 0 };
+
+static const struct db9_mode_data db9_modes[] = {
+ { NULL, NULL, 0, 0, 0, 0, 0 },
+ { "Multisystem joystick", db9_multi_btn, 1, 1, 2, 1, 1 },
+ { "Multisystem joystick (2 fire)", db9_multi_btn, 2, 1, 2, 1, 1 },
+ { "Genesis pad", db9_genesis_btn, 4, 1, 2, 1, 1 },
+ { NULL, NULL, 0, 0, 0, 0, 0 },
+ { "Genesis 5 pad", db9_genesis_btn, 6, 1, 2, 1, 1 },
+ { "Genesis 6 pad", db9_genesis_btn, 8, 1, 2, 1, 1 },
+ { "Saturn pad", db9_cd32_btn, 9, 6, 7, 0, 1 },
+ { "Multisystem (0.8.0.2) joystick", db9_multi_btn, 1, 1, 2, 1, 1 },
+ { "Multisystem (0.8.0.2-dual) joystick", db9_multi_btn, 1, 2, 2, 1, 1 },
+ { "Amiga CD-32 pad", db9_cd32_btn, 7, 1, 2, 1, 1 },
+ { "Saturn dpp", db9_cd32_btn, 9, 6, 7, 0, 0 },
+ { "Saturn dpp dual", db9_cd32_btn, 9, 12, 7, 0, 0 },
+};
/*
* Saturn controllers
@@ -342,7 +358,7 @@
default:
return -1;
}
- max_pads = min(db9_max_pads[mode], DB9_MAX_DEVICES);
+ max_pads = min(db9_modes[mode].n_pads, DB9_MAX_DEVICES);
for (tmp = 0, i = 0; i < n; i++) {
id = db9_saturn_read_packet(port, data, type + i, 1);
tmp = db9_saturn_report(id, data, dev, tmp, max_pads);
@@ -354,17 +370,18 @@
{
struct db9 *db9 = (void *) private;
struct parport *port = db9->pd->port;
- struct input_dev *dev = db9->dev;
+ struct input_dev *dev = db9->dev[0];
+ struct input_dev *dev2 = db9->dev[1];
int data, i;
- switch(db9->mode) {
+ switch (db9->mode) {
case DB9_MULTI_0802_2:
data = parport_read_data(port) >> 3;
- input_report_abs(dev + 1, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1));
- input_report_abs(dev + 1, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1));
- input_report_key(dev + 1, BTN_TRIGGER, ~data & DB9_FIRE1);
+ input_report_abs(dev2, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1));
+ input_report_abs(dev2, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1));
+ input_report_key(dev2, BTN_TRIGGER, ~data & DB9_FIRE1);
case DB9_MULTI_0802:
@@ -405,7 +422,7 @@
input_report_key(dev, BTN_C, ~data & DB9_FIRE2);
parport_write_control(port, DB9_NORMAL);
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_key(dev, BTN_A, ~data & DB9_FIRE1);
input_report_key(dev, BTN_START, ~data & DB9_FIRE2);
@@ -414,7 +431,7 @@
case DB9_GENESIS5_PAD:
parport_write_control(port, DB9_NOSELECT);
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1));
input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1));
@@ -422,7 +439,7 @@
input_report_key(dev, BTN_C, ~data & DB9_FIRE2);
parport_write_control(port, DB9_NORMAL);
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_key(dev, BTN_A, ~data & DB9_FIRE1);
input_report_key(dev, BTN_X, ~data & DB9_FIRE2);
@@ -434,7 +451,7 @@
parport_write_control(port, DB9_NOSELECT); /* 1 */
udelay(DB9_GENESIS6_DELAY);
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1));
input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1));
@@ -443,7 +460,7 @@
parport_write_control(port, DB9_NORMAL);
udelay(DB9_GENESIS6_DELAY);
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_key(dev, BTN_A, ~data & DB9_FIRE1);
input_report_key(dev, BTN_START, ~data & DB9_FIRE2);
@@ -477,7 +494,7 @@
case DB9_CD32_PAD:
- data=parport_read_data(port);
+ data = parport_read_data(port);
input_report_abs(dev, ABS_X, (data & DB9_RIGHT ? 0 : 1) - (data & DB9_LEFT ? 0 : 1));
input_report_abs(dev, ABS_Y, (data & DB9_DOWN ? 0 : 1) - (data & DB9_UP ? 0 : 1));
@@ -489,7 +506,7 @@
parport_write_control(port, 0x02);
parport_write_control(port, 0x0a);
input_report_key(dev, db9_cd32_btn[i], ~data & DB9_FIRE2);
- }
+ }
parport_write_control(port, 0x00);
break;
@@ -513,7 +530,7 @@
if (!db9->used++) {
parport_claim(db9->pd);
parport_write_data(port, 0xff);
- if (db9_reverse[db9->mode]) {
+ if (db9_modes[db9->mode].reverse) {
parport_data_reverse(port);
parport_write_control(port, DB9_NORMAL);
}
@@ -539,117 +556,160 @@
up(&db9->sem);
}
-static struct db9 __init *db9_probe(int *config, int nargs)
+static struct db9 __init *db9_probe(int parport, int mode)
{
struct db9 *db9;
+ const struct db9_mode_data *db9_mode;
struct parport *pp;
+ struct pardevice *pd;
+ struct input_dev *input_dev;
int i, j;
+ int err;
- if (config[0] < 0)
- return NULL;
-
- if (nargs < 2) {
- printk(KERN_ERR "db9.c: Device type must be specified.\n");
- return NULL;
+ if (mode < 1 || mode >= DB9_MAX_PAD || !db9_modes[mode].n_buttons) {
+ printk(KERN_ERR "db9.c: Bad device type %d\n", mode);
+ err = -EINVAL;
+ goto err_out;
}
- if (config[1] < 1 || config[1] >= DB9_MAX_PAD || !db9_buttons[config[1]]) {
- printk(KERN_ERR "db9.c: bad config\n");
- return NULL;
- }
+ db9_mode = &db9_modes[mode];
- pp = parport_find_number(config[0]);
+ pp = parport_find_number(parport);
if (!pp) {
printk(KERN_ERR "db9.c: no such parport\n");
- return NULL;
+ err = -ENODEV;
+ goto err_out;
}
- if (db9_bidirectional[config[1]]) {
- if (!(pp->modes & PARPORT_MODE_TRISTATE)) {
- printk(KERN_ERR "db9.c: specified parport is not bidirectional\n");
- parport_put_port(pp);
- return NULL;
- }
+ if (db9_mode[mode].bidirectional && !(pp->modes & PARPORT_MODE_TRISTATE)) {
+ printk(KERN_ERR "db9.c: specified parport is not bidirectional\n");
+ err = -EINVAL;
+ goto err_put_pp;
}
- if (!(db9 = kzalloc(sizeof(struct db9), GFP_KERNEL))) {
- parport_put_port(pp);
- return NULL;
+ pd = parport_register_device(pp, "db9", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
+ if (!pd) {
+ printk(KERN_ERR "db9.c: parport busy already - lp.o loaded?\n");
+ err = -EBUSY;
+ goto err_put_pp;
+ }
+
+ db9 = kzalloc(sizeof(struct db9), GFP_KERNEL);
+ if (!db9) {
+ printk(KERN_ERR "db9.c: Not enough memory\n");
+ err = -ENOMEM;
+ goto err_unreg_pardev;
}
init_MUTEX(&db9->sem);
- db9->mode = config[1];
+ db9->pd = pd;
+ db9->mode = mode;
init_timer(&db9->timer);
db9->timer.data = (long) db9;
db9->timer.function = db9_timer;
- db9->pd = parport_register_device(pp, "db9", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
- parport_put_port(pp);
+ for (i = 0; i < (min(db9_mode->n_pads, DB9_MAX_DEVICES)); i++) {
- if (!db9->pd) {
- printk(KERN_ERR "db9.c: parport busy already - lp.o loaded?\n");
- kfree(db9);
- return NULL;
- }
-
- for (i = 0; i < (min(db9_max_pads[db9->mode], DB9_MAX_DEVICES)); i++) {
+ db9->dev[i] = input_dev = input_allocate_device();
+ if (!input_dev) {
+ printk(KERN_ERR "db9.c: Not enough memory for input device\n");
+ err = -ENOMEM;
+ goto err_free_devs;
+ }
sprintf(db9->phys[i], "%s/input%d", db9->pd->port->name, i);
- db9->dev[i].private = db9;
- db9->dev[i].open = db9_open;
- db9->dev[i].close = db9_close;
+ input_dev->name = db9_mode->name;
+ input_dev->phys = db9->phys[i];
+ input_dev->id.bustype = BUS_PARPORT;
+ input_dev->id.vendor = 0x0002;
+ input_dev->id.product = mode;
+ input_dev->id.version = 0x0100;
+ input_dev->private = db9;
- db9->dev[i].name = db9_name[db9->mode];
- db9->dev[i].phys = db9->phys[i];
- db9->dev[i].id.bustype = BUS_PARPORT;
- db9->dev[i].id.vendor = 0x0002;
- db9->dev[i].id.product = config[1];
- db9->dev[i].id.version = 0x0100;
+ input_dev->open = db9_open;
+ input_dev->close = db9_close;
- db9->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- for (j = 0; j < db9_buttons[db9->mode]; j++)
- set_bit(db9_btn[db9->mode][j], db9->dev[i].keybit);
- for (j = 0; j < db9_num_axis[db9->mode]; j++) {
- set_bit(db9_abs[j], db9->dev[i].absbit);
- if (j < 2) {
- db9->dev[i].absmin[db9_abs[j]] = -1;
- db9->dev[i].absmax[db9_abs[j]] = 1;
- } else {
- db9->dev[i].absmin[db9_abs[j]] = 1;
- db9->dev[i].absmax[db9_abs[j]] = 255;
- db9->dev[i].absflat[db9_abs[j]] = 0;
- }
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ for (j = 0; j < db9_mode->n_buttons; j++)
+ set_bit(db9_mode->buttons[j], input_dev->keybit);
+ for (j = 0; j < db9_mode->n_axis; j++) {
+ if (j < 2)
+ input_set_abs_params(input_dev, db9_abs[j], -1, 1, 0, 0);
+ else
+ input_set_abs_params(input_dev, db9_abs[j], 1, 255, 0, 0);
}
- input_register_device(db9->dev + i);
- printk(KERN_INFO "input: %s on %s\n", db9->dev[i].name, db9->pd->port->name);
+
+ input_register_device(input_dev);
}
+ parport_put_port(pp);
return db9;
+
+ err_free_devs:
+ while (--i >= 0)
+ input_unregister_device(db9->dev[i]);
+ kfree(db9);
+ err_unreg_pardev:
+ parport_unregister_device(pd);
+ err_put_pp:
+ parport_put_port(pp);
+ err_out:
+ return ERR_PTR(err);
+}
+
+static void __exit db9_remove(struct db9 *db9)
+{
+ int i;
+
+ for (i = 0; i < min(db9_modes[db9->mode].n_pads, DB9_MAX_DEVICES); i++)
+ input_unregister_device(db9->dev[i]);
+ parport_unregister_device(db9->pd);
+ kfree(db9);
}
static int __init db9_init(void)
{
- db9_base[0] = db9_probe(db9, db9_nargs);
- db9_base[1] = db9_probe(db9_2, db9_nargs_2);
- db9_base[2] = db9_probe(db9_3, db9_nargs_3);
+ int i;
+ int have_dev = 0;
+ int err = 0;
- if (db9_base[0] || db9_base[1] || db9_base[2])
- return 0;
+ for (i = 0; i < DB9_MAX_PORTS; i++) {
+ if (db9[i].nargs == 0 || db9[i].args[DB9_ARG_PARPORT] < 0)
+ continue;
- return -ENODEV;
+ if (db9[i].nargs < 2) {
+ printk(KERN_ERR "db9.c: Device type must be specified.\n");
+ err = -EINVAL;
+ break;
+ }
+
+ db9_base[i] = db9_probe(db9[i].args[DB9_ARG_PARPORT],
+ db9[i].args[DB9_ARG_MODE]);
+ if (IS_ERR(db9_base[i])) {
+ err = PTR_ERR(db9_base[i]);
+ break;
+ }
+
+ have_dev = 1;
+ }
+
+ if (err) {
+ while (--i >= 0)
+ db9_remove(db9_base[i]);
+ return err;
+ }
+
+ return have_dev ? 0 : -ENODEV;
}
static void __exit db9_exit(void)
{
- int i, j;
+ int i;
- for (i = 0; i < 3; i++)
- if (db9_base[i]) {
- for (j = 0; j < min(db9_max_pads[db9_base[i]->mode], DB9_MAX_DEVICES); j++)
- input_unregister_device(db9_base[i]->dev + j);
- parport_unregister_device(db9_base[i]->pd);
- }
+ for (i = 0; i < DB9_MAX_PORTS; i++)
+ if (db9_base[i])
+ db9_remove(db9_base[i]);
}
module_init(db9_init);
diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
index 5427bf9..7df2d82 100644
--- a/drivers/input/joystick/gamecon.c
+++ b/drivers/input/joystick/gamecon.c
@@ -41,20 +41,22 @@
MODULE_DESCRIPTION("NES, SNES, N64, MultiSystem, PSX gamepad driver");
MODULE_LICENSE("GPL");
-static int gc[] __initdata = { -1, 0, 0, 0, 0, 0 };
-static int gc_nargs __initdata = 0;
-module_param_array_named(map, gc, int, &gc_nargs, 0);
-MODULE_PARM_DESC(map, "Describers first set of devices (<parport#>,<pad1>,<pad2>,..<pad5>)");
+#define GC_MAX_PORTS 3
+#define GC_MAX_DEVICES 5
-static int gc_2[] __initdata = { -1, 0, 0, 0, 0, 0 };
-static int gc_nargs_2 __initdata = 0;
-module_param_array_named(map2, gc_2, int, &gc_nargs_2, 0);
-MODULE_PARM_DESC(map2, "Describers second set of devices");
+struct gc_config {
+ int args[GC_MAX_DEVICES + 1];
+ int nargs;
+};
-static int gc_3[] __initdata = { -1, 0, 0, 0, 0, 0 };
-static int gc_nargs_3 __initdata = 0;
-module_param_array_named(map3, gc_3, int, &gc_nargs_3, 0);
-MODULE_PARM_DESC(map3, "Describers third set of devices");
+static struct gc_config gc[GC_MAX_PORTS] __initdata;
+
+module_param_array_named(map, gc[0].args, int, &gc[0].nargs, 0);
+MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<pad1>,<pad2>,..<pad5>)");
+module_param_array_named(map2, gc[1].args, int, &gc[1].nargs, 0);
+MODULE_PARM_DESC(map2, "Describes second set of devices");
+module_param_array_named(map3, gc[2].args, int, &gc[2].nargs, 0);
+MODULE_PARM_DESC(map3, "Describes third set of devices");
__obsolete_setup("gc=");
__obsolete_setup("gc_2=");
@@ -77,12 +79,12 @@
struct gc {
struct pardevice *pd;
- struct input_dev dev[5];
+ struct input_dev *dev[GC_MAX_DEVICES];
struct timer_list timer;
unsigned char pads[GC_MAX + 1];
int used;
struct semaphore sem;
- char phys[5][32];
+ char phys[GC_MAX_DEVICES][32];
};
static struct gc *gc_base[3];
@@ -330,7 +332,6 @@
static void gc_timer(unsigned long private)
{
struct gc *gc = (void *) private;
- struct input_dev *dev = gc->dev;
unsigned char data[GC_MAX_LENGTH];
unsigned char data_psx[5][GC_PSX_BYTES];
int i, j, s;
@@ -357,16 +358,16 @@
if (data[31 - j] & s) axes[1] |= 1 << j;
}
- input_report_abs(dev + i, ABS_X, axes[0]);
- input_report_abs(dev + i, ABS_Y, -axes[1]);
+ input_report_abs(gc->dev[i], ABS_X, axes[0]);
+ input_report_abs(gc->dev[i], ABS_Y, -axes[1]);
- input_report_abs(dev + i, ABS_HAT0X, !(s & data[6]) - !(s & data[7]));
- input_report_abs(dev + i, ABS_HAT0Y, !(s & data[4]) - !(s & data[5]));
+ input_report_abs(gc->dev[i], ABS_HAT0X, !(s & data[6]) - !(s & data[7]));
+ input_report_abs(gc->dev[i], ABS_HAT0Y, !(s & data[4]) - !(s & data[5]));
for (j = 0; j < 10; j++)
- input_report_key(dev + i, gc_n64_btn[j], s & data[gc_n64_bytes[j]]);
+ input_report_key(gc->dev[i], gc_n64_btn[j], s & data[gc_n64_bytes[j]]);
- input_sync(dev + i);
+ input_sync(gc->dev[i]);
}
}
}
@@ -384,19 +385,19 @@
s = gc_status_bit[i];
if (s & (gc->pads[GC_NES] | gc->pads[GC_SNES])) {
- input_report_abs(dev + i, ABS_X, !(s & data[6]) - !(s & data[7]));
- input_report_abs(dev + i, ABS_Y, !(s & data[4]) - !(s & data[5]));
+ input_report_abs(gc->dev[i], ABS_X, !(s & data[6]) - !(s & data[7]));
+ input_report_abs(gc->dev[i], ABS_Y, !(s & data[4]) - !(s & data[5]));
}
if (s & gc->pads[GC_NES])
for (j = 0; j < 4; j++)
- input_report_key(dev + i, gc_snes_btn[j], s & data[gc_nes_bytes[j]]);
+ input_report_key(gc->dev[i], gc_snes_btn[j], s & data[gc_nes_bytes[j]]);
if (s & gc->pads[GC_SNES])
for (j = 0; j < 8; j++)
- input_report_key(dev + i, gc_snes_btn[j], s & data[gc_snes_bytes[j]]);
+ input_report_key(gc->dev[i], gc_snes_btn[j], s & data[gc_snes_bytes[j]]);
- input_sync(dev + i);
+ input_sync(gc->dev[i]);
}
}
@@ -413,15 +414,15 @@
s = gc_status_bit[i];
if (s & (gc->pads[GC_MULTI] | gc->pads[GC_MULTI2])) {
- input_report_abs(dev + i, ABS_X, !(s & data[2]) - !(s & data[3]));
- input_report_abs(dev + i, ABS_Y, !(s & data[0]) - !(s & data[1]));
- input_report_key(dev + i, BTN_TRIGGER, s & data[4]);
+ input_report_abs(gc->dev[i], ABS_X, !(s & data[2]) - !(s & data[3]));
+ input_report_abs(gc->dev[i], ABS_Y, !(s & data[0]) - !(s & data[1]));
+ input_report_key(gc->dev[i], BTN_TRIGGER, s & data[4]);
}
if (s & gc->pads[GC_MULTI2])
- input_report_key(dev + i, BTN_THUMB, s & data[5]);
+ input_report_key(gc->dev[i], BTN_THUMB, s & data[5]);
- input_sync(dev + i);
+ input_sync(gc->dev[i]);
}
}
@@ -438,44 +439,44 @@
case GC_PSX_RUMBLE:
- input_report_key(dev + i, BTN_THUMBL, ~data_psx[i][0] & 0x04);
- input_report_key(dev + i, BTN_THUMBR, ~data_psx[i][0] & 0x02);
+ input_report_key(gc->dev[i], BTN_THUMBL, ~data_psx[i][0] & 0x04);
+ input_report_key(gc->dev[i], BTN_THUMBR, ~data_psx[i][0] & 0x02);
case GC_PSX_NEGCON:
case GC_PSX_ANALOG:
- if(gc->pads[GC_DDR] & gc_status_bit[i]) {
+ if (gc->pads[GC_DDR] & gc_status_bit[i]) {
for(j = 0; j < 4; j++)
- input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
+ input_report_key(gc->dev[i], gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
} else {
for (j = 0; j < 4; j++)
- input_report_abs(dev + i, gc_psx_abs[j+2], data_psx[i][j + 2]);
+ input_report_abs(gc->dev[i], gc_psx_abs[j+2], data_psx[i][j + 2]);
- input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
- input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
+ input_report_abs(gc->dev[i], ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
+ input_report_abs(gc->dev[i], ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
}
for (j = 0; j < 8; j++)
- input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
+ input_report_key(gc->dev[i], gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
- input_report_key(dev + i, BTN_START, ~data_psx[i][0] & 0x08);
- input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01);
+ input_report_key(gc->dev[i], BTN_START, ~data_psx[i][0] & 0x08);
+ input_report_key(gc->dev[i], BTN_SELECT, ~data_psx[i][0] & 0x01);
- input_sync(dev + i);
+ input_sync(gc->dev[i]);
break;
case GC_PSX_NORMAL:
- if(gc->pads[GC_DDR] & gc_status_bit[i]) {
+ if (gc->pads[GC_DDR] & gc_status_bit[i]) {
for(j = 0; j < 4; j++)
- input_report_key(dev + i, gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
+ input_report_key(gc->dev[i], gc_psx_ddr_btn[j], ~data_psx[i][0] & (0x10 << j));
} else {
- input_report_abs(dev + i, ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
- input_report_abs(dev + i, ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
+ input_report_abs(gc->dev[i], ABS_X, 128 + !(data_psx[i][0] & 0x20) * 127 - !(data_psx[i][0] & 0x80) * 128);
+ input_report_abs(gc->dev[i], ABS_Y, 128 + !(data_psx[i][0] & 0x40) * 127 - !(data_psx[i][0] & 0x10) * 128);
/* for some reason if the extra axes are left unset they drift */
/* for (j = 0; j < 4; j++)
- input_report_abs(dev + i, gc_psx_abs[j+2], 128);
+ input_report_abs(gc->dev[i], gc_psx_abs[j+2], 128);
* This needs to be debugged properly,
* maybe fuzz processing needs to be done in input_sync()
* --vojtech
@@ -483,12 +484,12 @@
}
for (j = 0; j < 8; j++)
- input_report_key(dev + i, gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
+ input_report_key(gc->dev[i], gc_psx_btn[j], ~data_psx[i][1] & (1 << j));
- input_report_key(dev + i, BTN_START, ~data_psx[i][0] & 0x08);
- input_report_key(dev + i, BTN_SELECT, ~data_psx[i][0] & 0x01);
+ input_report_key(gc->dev[i], BTN_START, ~data_psx[i][0] & 0x08);
+ input_report_key(gc->dev[i], BTN_SELECT, ~data_psx[i][0] & 0x01);
- input_sync(dev + i);
+ input_sync(gc->dev[i]);
break;
@@ -533,177 +534,212 @@
up(&gc->sem);
}
-static struct gc __init *gc_probe(int *config, int nargs)
+static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type)
+{
+ struct input_dev *input_dev;
+ int i;
+
+ if (!pad_type)
+ return 0;
+
+ if (pad_type < 1 || pad_type > GC_MAX) {
+ printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", pad_type);
+ return -EINVAL;
+ }
+
+ gc->dev[idx] = input_dev = input_allocate_device();
+ if (!input_dev) {
+ printk(KERN_ERR "gamecon.c: Not enough memory for input device\n");
+ return -ENOMEM;
+ }
+
+ input_dev->name = gc_names[pad_type];
+ input_dev->phys = gc->phys[idx];
+ input_dev->id.bustype = BUS_PARPORT;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = pad_type;
+ input_dev->id.version = 0x0100;
+ input_dev->private = gc;
+
+ input_dev->open = gc_open;
+ input_dev->close = gc_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (i = 0; i < 2; i++)
+ input_set_abs_params(input_dev, ABS_X + i, -1, 1, 0, 0);
+
+ gc->pads[0] |= gc_status_bit[idx];
+ gc->pads[pad_type] |= gc_status_bit[idx];
+
+ switch (pad_type) {
+
+ case GC_N64:
+ for (i = 0; i < 10; i++)
+ set_bit(gc_n64_btn[i], input_dev->keybit);
+
+ for (i = 0; i < 2; i++) {
+ input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2);
+ input_set_abs_params(input_dev, ABS_HAT0X + i, -1, 1, 0, 0);
+ }
+
+ break;
+
+ case GC_SNES:
+ for (i = 4; i < 8; i++)
+ set_bit(gc_snes_btn[i], input_dev->keybit);
+ case GC_NES:
+ for (i = 0; i < 4; i++)
+ set_bit(gc_snes_btn[i], input_dev->keybit);
+ break;
+
+ case GC_MULTI2:
+ set_bit(BTN_THUMB, input_dev->keybit);
+ case GC_MULTI:
+ set_bit(BTN_TRIGGER, input_dev->keybit);
+ break;
+
+ case GC_PSX:
+ for (i = 0; i < 6; i++)
+ input_set_abs_params(input_dev, gc_psx_abs[i], 4, 252, 0, 2);
+ for (i = 0; i < 12; i++)
+ set_bit(gc_psx_btn[i], input_dev->keybit);
+
+ break;
+
+ case GC_DDR:
+ for (i = 0; i < 4; i++)
+ set_bit(gc_psx_ddr_btn[i], input_dev->keybit);
+ for (i = 0; i < 12; i++)
+ set_bit(gc_psx_btn[i], input_dev->keybit);
+
+ break;
+ }
+
+ return 0;
+}
+
+static struct gc __init *gc_probe(int parport, int *pads, int n_pads)
{
struct gc *gc;
struct parport *pp;
- int i, j;
+ struct pardevice *pd;
+ int i;
+ int err;
- if (config[0] < 0)
- return NULL;
-
- if (nargs < 2) {
- printk(KERN_ERR "gamecon.c: at least one device must be specified\n");
- return NULL;
- }
-
- pp = parport_find_number(config[0]);
-
+ pp = parport_find_number(parport);
if (!pp) {
printk(KERN_ERR "gamecon.c: no such parport\n");
- return NULL;
+ err = -EINVAL;
+ goto err_out;
}
- if (!(gc = kzalloc(sizeof(struct gc), GFP_KERNEL))) {
- parport_put_port(pp);
- return NULL;
+ pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
+ if (!pd) {
+ printk(KERN_ERR "gamecon.c: parport busy already - lp.o loaded?\n");
+ err = -EBUSY;
+ goto err_put_pp;
+ }
+
+ gc = kzalloc(sizeof(struct gc), GFP_KERNEL);
+ if (!gc) {
+ printk(KERN_ERR "gamecon.c: Not enough memory\n");
+ err = -ENOMEM;
+ goto err_unreg_pardev;
}
init_MUTEX(&gc->sem);
-
- gc->pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
-
- parport_put_port(pp);
-
- if (!gc->pd) {
- printk(KERN_ERR "gamecon.c: parport busy already - lp.o loaded?\n");
- kfree(gc);
- return NULL;
- }
-
- parport_claim(gc->pd);
-
+ gc->pd = pd;
init_timer(&gc->timer);
gc->timer.data = (long) gc;
gc->timer.function = gc_timer;
- for (i = 0; i < nargs - 1; i++) {
-
- if (!config[i + 1])
+ for (i = 0; i < n_pads; i++) {
+ if (!pads[i])
continue;
- if (config[i + 1] < 1 || config[i + 1] > GC_MAX) {
- printk(KERN_WARNING "gamecon.c: Pad type %d unknown\n", config[i + 1]);
- continue;
- }
-
- gc->dev[i].private = gc;
- gc->dev[i].open = gc_open;
- gc->dev[i].close = gc_close;
-
- gc->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (j = 0; j < 2; j++) {
- set_bit(ABS_X + j, gc->dev[i].absbit);
- gc->dev[i].absmin[ABS_X + j] = -1;
- gc->dev[i].absmax[ABS_X + j] = 1;
- }
-
- gc->pads[0] |= gc_status_bit[i];
- gc->pads[config[i + 1]] |= gc_status_bit[i];
-
- switch(config[i + 1]) {
-
- case GC_N64:
- for (j = 0; j < 10; j++)
- set_bit(gc_n64_btn[j], gc->dev[i].keybit);
-
- for (j = 0; j < 2; j++) {
- set_bit(ABS_X + j, gc->dev[i].absbit);
- gc->dev[i].absmin[ABS_X + j] = -127;
- gc->dev[i].absmax[ABS_X + j] = 126;
- gc->dev[i].absflat[ABS_X + j] = 2;
- set_bit(ABS_HAT0X + j, gc->dev[i].absbit);
- gc->dev[i].absmin[ABS_HAT0X + j] = -1;
- gc->dev[i].absmax[ABS_HAT0X + j] = 1;
- }
-
- break;
-
- case GC_SNES:
- for (j = 4; j < 8; j++)
- set_bit(gc_snes_btn[j], gc->dev[i].keybit);
- case GC_NES:
- for (j = 0; j < 4; j++)
- set_bit(gc_snes_btn[j], gc->dev[i].keybit);
- break;
-
- case GC_MULTI2:
- set_bit(BTN_THUMB, gc->dev[i].keybit);
- case GC_MULTI:
- set_bit(BTN_TRIGGER, gc->dev[i].keybit);
- break;
-
- case GC_PSX:
- case GC_DDR:
- if(config[i + 1] == GC_DDR) {
- for (j = 0; j < 4; j++)
- set_bit(gc_psx_ddr_btn[j], gc->dev[i].keybit);
- } else {
- for (j = 0; j < 6; j++) {
- set_bit(gc_psx_abs[j], gc->dev[i].absbit);
- gc->dev[i].absmin[gc_psx_abs[j]] = 4;
- gc->dev[i].absmax[gc_psx_abs[j]] = 252;
- gc->dev[i].absflat[gc_psx_abs[j]] = 2;
- }
- }
-
- for (j = 0; j < 12; j++)
- set_bit(gc_psx_btn[j], gc->dev[i].keybit);
-
- break;
- }
-
sprintf(gc->phys[i], "%s/input%d", gc->pd->port->name, i);
+ err = gc_setup_pad(gc, i, pads[i]);
+ if (err)
+ goto err_free_devs;
- gc->dev[i].name = gc_names[config[i + 1]];
- gc->dev[i].phys = gc->phys[i];
- gc->dev[i].id.bustype = BUS_PARPORT;
- gc->dev[i].id.vendor = 0x0001;
- gc->dev[i].id.product = config[i + 1];
- gc->dev[i].id.version = 0x0100;
+ input_register_device(gc->dev[i]);
}
- parport_release(gc->pd);
-
if (!gc->pads[0]) {
- parport_unregister_device(gc->pd);
- kfree(gc);
- return NULL;
+ printk(KERN_ERR "gamecon.c: No valid devices specified\n");
+ err = -EINVAL;
+ goto err_free_gc;
}
- for (i = 0; i < 5; i++)
- if (gc->pads[0] & gc_status_bit[i]) {
- input_register_device(gc->dev + i);
- printk(KERN_INFO "input: %s on %s\n", gc->dev[i].name, gc->pd->port->name);
- }
-
+ parport_put_port(pp);
return gc;
+
+ err_free_devs:
+ while (--i >= 0)
+ input_unregister_device(gc->dev[i]);
+ err_free_gc:
+ kfree(gc);
+ err_unreg_pardev:
+ parport_unregister_device(pd);
+ err_put_pp:
+ parport_put_port(pp);
+ err_out:
+ return ERR_PTR(err);
+}
+
+static void __exit gc_remove(struct gc *gc)
+{
+ int i;
+
+ for (i = 0; i < GC_MAX_DEVICES; i++)
+ if (gc->dev[i])
+ input_unregister_device(gc->dev[i]);
+ parport_unregister_device(gc->pd);
+ kfree(gc);
}
static int __init gc_init(void)
{
- gc_base[0] = gc_probe(gc, gc_nargs);
- gc_base[1] = gc_probe(gc_2, gc_nargs_2);
- gc_base[2] = gc_probe(gc_3, gc_nargs_3);
+ int i;
+ int have_dev = 0;
+ int err = 0;
- if (gc_base[0] || gc_base[1] || gc_base[2])
- return 0;
+ for (i = 0; i < GC_MAX_PORTS; i++) {
+ if (gc[i].nargs == 0 || gc[i].args[0] < 0)
+ continue;
- return -ENODEV;
+ if (gc[i].nargs < 2) {
+ printk(KERN_ERR "gamecon.c: at least one device must be specified\n");
+ err = -EINVAL;
+ break;
+ }
+
+ gc_base[i] = gc_probe(gc[i].args[0], gc[i].args + 1, gc[i].nargs - 1);
+ if (IS_ERR(gc_base[i])) {
+ err = PTR_ERR(gc_base[i]);
+ break;
+ }
+
+ have_dev = 1;
+ }
+
+ if (err) {
+ while (--i >= 0)
+ gc_remove(gc_base[i]);
+ return err;
+ }
+
+ return have_dev ? 0 : -ENODEV;
}
static void __exit gc_exit(void)
{
- int i, j;
+ int i;
- for (i = 0; i < 3; i++)
- if (gc_base[i]) {
- for (j = 0; j < 5; j++)
- if (gc_base[i]->pads[0] & gc_status_bit[j])
- input_unregister_device(gc_base[i]->dev + j);
- parport_unregister_device(gc_base[i]->pd);
- }
+ for (i = 0; i < GC_MAX_PORTS; i++)
+ if (gc_base[i])
+ gc_remove(gc_base[i]);
}
module_init(gc_init);
diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c
index 8e4f92b..e151f8c 100644
--- a/drivers/input/joystick/gf2k.c
+++ b/drivers/input/joystick/gf2k.c
@@ -81,7 +81,7 @@
struct gf2k {
struct gameport *gameport;
- struct input_dev dev;
+ struct input_dev *dev;
int reads;
int bads;
unsigned char id;
@@ -175,7 +175,7 @@
static void gf2k_read(struct gf2k *gf2k, unsigned char *data)
{
- struct input_dev *dev = &gf2k->dev;
+ struct input_dev *dev = gf2k->dev;
int i, t;
for (i = 0; i < 4 && i < gf2k_axes[gf2k->id]; i++)
@@ -239,13 +239,19 @@
static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct gf2k *gf2k;
+ struct input_dev *input_dev;
unsigned char data[GF2K_LENGTH];
int i, err;
- if (!(gf2k = kzalloc(sizeof(struct gf2k), GFP_KERNEL)))
- return -ENOMEM;
+ gf2k = kzalloc(sizeof(struct gf2k), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!gf2k || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
gf2k->gameport = gameport;
+ gf2k->dev = input_dev;
gameport_set_drvdata(gameport, gf2k);
@@ -295,53 +301,52 @@
gf2k->length = gf2k_lens[gf2k->id];
- init_input_dev(&gf2k->dev);
+ input_dev->name = gf2k_names[gf2k->id];
+ input_dev->phys = gf2k->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_GENIUS;
+ input_dev->id.product = gf2k->id;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &gameport->dev;
+ input_dev->private = gf2k;
- gf2k->dev.private = gf2k;
- gf2k->dev.open = gf2k_open;
- gf2k->dev.close = gf2k_close;
- gf2k->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- gf2k->dev.name = gf2k_names[gf2k->id];
- gf2k->dev.phys = gf2k->phys;
- gf2k->dev.id.bustype = BUS_GAMEPORT;
- gf2k->dev.id.vendor = GAMEPORT_ID_VENDOR_GENIUS;
- gf2k->dev.id.product = gf2k->id;
- gf2k->dev.id.version = 0x0100;
+ input_dev->open = gf2k_open;
+ input_dev->close = gf2k_close;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = 0; i < gf2k_axes[gf2k->id]; i++)
- set_bit(gf2k_abs[i], gf2k->dev.absbit);
+ set_bit(gf2k_abs[i], input_dev->absbit);
for (i = 0; i < gf2k_hats[gf2k->id]; i++) {
- set_bit(ABS_HAT0X + i, gf2k->dev.absbit);
- gf2k->dev.absmin[ABS_HAT0X + i] = -1;
- gf2k->dev.absmax[ABS_HAT0X + i] = 1;
+ set_bit(ABS_HAT0X + i, input_dev->absbit);
+ input_dev->absmin[ABS_HAT0X + i] = -1;
+ input_dev->absmax[ABS_HAT0X + i] = 1;
}
for (i = 0; i < gf2k_joys[gf2k->id]; i++)
- set_bit(gf2k_btn_joy[i], gf2k->dev.keybit);
+ set_bit(gf2k_btn_joy[i], input_dev->keybit);
for (i = 0; i < gf2k_pads[gf2k->id]; i++)
- set_bit(gf2k_btn_pad[i], gf2k->dev.keybit);
+ set_bit(gf2k_btn_pad[i], input_dev->keybit);
gf2k_read_packet(gameport, gf2k->length, data);
gf2k_read(gf2k, data);
for (i = 0; i < gf2k_axes[gf2k->id]; i++) {
- gf2k->dev.absmax[gf2k_abs[i]] = (i < 2) ? gf2k->dev.abs[gf2k_abs[i]] * 2 - 32 :
- gf2k->dev.abs[gf2k_abs[0]] + gf2k->dev.abs[gf2k_abs[1]] - 32;
- gf2k->dev.absmin[gf2k_abs[i]] = 32;
- gf2k->dev.absfuzz[gf2k_abs[i]] = 8;
- gf2k->dev.absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0;
+ input_dev->absmax[gf2k_abs[i]] = (i < 2) ? input_dev->abs[gf2k_abs[i]] * 2 - 32 :
+ input_dev->abs[gf2k_abs[0]] + input_dev->abs[gf2k_abs[1]] - 32;
+ input_dev->absmin[gf2k_abs[i]] = 32;
+ input_dev->absfuzz[gf2k_abs[i]] = 8;
+ input_dev->absflat[gf2k_abs[i]] = (i < 2) ? 24 : 0;
}
- input_register_device(&gf2k->dev);
- printk(KERN_INFO "input: %s on %s\n", gf2k_names[gf2k->id], gameport->phys);
+ input_register_device(gf2k->dev);
return 0;
-fail2: gameport_close(gameport);
-fail1: gameport_set_drvdata(gameport, NULL);
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
+ input_free_device(input_dev);
kfree(gf2k);
return err;
}
@@ -350,7 +355,7 @@
{
struct gf2k *gf2k = gameport_get_drvdata(gameport);
- input_unregister_device(&gf2k->dev);
+ input_unregister_device(gf2k->dev);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(gf2k);
diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c
index 9d3f910..e206bb5 100644
--- a/drivers/input/joystick/grip.c
+++ b/drivers/input/joystick/grip.c
@@ -55,7 +55,7 @@
struct grip {
struct gameport *gameport;
- struct input_dev dev[2];
+ struct input_dev *dev[2];
unsigned char mode[2];
int reads;
int bads;
@@ -190,7 +190,7 @@
for (i = 0; i < 2; i++) {
- dev = grip->dev + i;
+ dev = grip->dev[i];
grip->reads++;
switch (grip->mode[i]) {
@@ -297,6 +297,7 @@
static int grip_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct grip *grip;
+ struct input_dev *input_dev;
unsigned int data[GRIP_LENGTH_XT];
int i, j, t;
int err;
@@ -339,48 +340,56 @@
gameport_set_poll_handler(gameport, grip_poll);
gameport_set_poll_interval(gameport, 20);
- for (i = 0; i < 2; i++)
- if (grip->mode[i]) {
+ for (i = 0; i < 2; i++) {
+ if (!grip->mode[i])
+ continue;
- sprintf(grip->phys[i], "%s/input%d", gameport->phys, i);
-
- grip->dev[i].private = grip;
-
- grip->dev[i].open = grip_open;
- grip->dev[i].close = grip_close;
-
- grip->dev[i].name = grip_name[grip->mode[i]];
- grip->dev[i].phys = grip->phys[i];
- grip->dev[i].id.bustype = BUS_GAMEPORT;
- grip->dev[i].id.vendor = GAMEPORT_ID_VENDOR_GRAVIS;
- grip->dev[i].id.product = grip->mode[i];
- grip->dev[i].id.version = 0x0100;
-
- grip->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (j = 0; (t = grip_abs[grip->mode[i]][j]) >= 0; j++) {
-
- if (j < grip_cen[grip->mode[i]])
- input_set_abs_params(&grip->dev[i], t, 14, 52, 1, 2);
- else if (j < grip_anx[grip->mode[i]])
- input_set_abs_params(&grip->dev[i], t, 3, 57, 1, 0);
- else
- input_set_abs_params(&grip->dev[i], t, -1, 1, 0, 0);
- }
-
- for (j = 0; (t = grip_btn[grip->mode[i]][j]) >= 0; j++)
- if (t > 0)
- set_bit(t, grip->dev[i].keybit);
-
- printk(KERN_INFO "input: %s on %s\n",
- grip_name[grip->mode[i]], gameport->phys);
- input_register_device(grip->dev + i);
+ grip->dev[i] = input_dev = input_allocate_device();
+ if (!input_dev) {
+ err = -ENOMEM;
+ goto fail3;
}
+ sprintf(grip->phys[i], "%s/input%d", gameport->phys, i);
+
+ input_dev->name = grip_name[grip->mode[i]];
+ input_dev->phys = grip->phys[i];
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_GRAVIS;
+ input_dev->id.product = grip->mode[i];
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &gameport->dev;
+ input_dev->private = grip;
+
+ input_dev->open = grip_open;
+ input_dev->close = grip_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (j = 0; (t = grip_abs[grip->mode[i]][j]) >= 0; j++) {
+
+ if (j < grip_cen[grip->mode[i]])
+ input_set_abs_params(input_dev, t, 14, 52, 1, 2);
+ else if (j < grip_anx[grip->mode[i]])
+ input_set_abs_params(input_dev, t, 3, 57, 1, 0);
+ else
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
+ }
+
+ for (j = 0; (t = grip_btn[grip->mode[i]][j]) >= 0; j++)
+ if (t > 0)
+ set_bit(t, input_dev->keybit);
+
+ input_register_device(grip->dev[i]);
+ }
+
return 0;
-fail2: gameport_close(gameport);
-fail1: gameport_set_drvdata(gameport, NULL);
+ fail3: for (i = 0; i < 2; i++)
+ if (grip->dev[i])
+ input_unregister_device(grip->dev[i]);
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
kfree(grip);
return err;
}
@@ -391,8 +400,8 @@
int i;
for (i = 0; i < 2; i++)
- if (grip->mode[i])
- input_unregister_device(grip->dev + i);
+ if (grip->dev[i])
+ input_unregister_device(grip->dev[i]);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(grip);
diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c
index da17eee..a0ba93c 100644
--- a/drivers/input/joystick/grip_mp.c
+++ b/drivers/input/joystick/grip_mp.c
@@ -32,23 +32,37 @@
#define dbg(format, arg...) do {} while (0)
#endif
+#define GRIP_MAX_PORTS 4
/*
* Grip multiport state
*/
+struct grip_port {
+ struct input_dev *dev;
+ int mode;
+ int registered;
+
+ /* individual gamepad states */
+ int buttons;
+ int xaxes;
+ int yaxes;
+ int dirty; /* has the state been updated? */
+};
+
struct grip_mp {
struct gameport *gameport;
- struct input_dev dev[4];
- int mode[4];
- int registered[4];
+ struct grip_port *port[GRIP_MAX_PORTS];
+// struct input_dev *dev[4];
+// int mode[4];
+// int registered[4];
int reads;
int bads;
/* individual gamepad states */
- int buttons[4];
- int xaxes[4];
- int yaxes[4];
- int dirty[4]; /* has the state been updated? */
+// int buttons[4];
+// int xaxes[4];
+// int yaxes[4];
+// int dirty[4]; /* has the state been updated? */
};
/*
@@ -85,16 +99,16 @@
#define GRIP_MODE_GP 2
#define GRIP_MODE_C64 3
-static int grip_btn_gp[] = { BTN_TR, BTN_TL, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, -1 };
-static int grip_btn_c64[] = { BTN_JOYSTICK, -1 };
+static const int grip_btn_gp[] = { BTN_TR, BTN_TL, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, -1 };
+static const int grip_btn_c64[] = { BTN_JOYSTICK, -1 };
-static int grip_abs_gp[] = { ABS_X, ABS_Y, -1 };
-static int grip_abs_c64[] = { ABS_X, ABS_Y, -1 };
+static const int grip_abs_gp[] = { ABS_X, ABS_Y, -1 };
+static const int grip_abs_c64[] = { ABS_X, ABS_Y, -1 };
-static int *grip_abs[] = { NULL, NULL, grip_abs_gp, grip_abs_c64 };
-static int *grip_btn[] = { NULL, NULL, grip_btn_gp, grip_btn_c64 };
+static const int *grip_abs[] = { NULL, NULL, grip_abs_gp, grip_abs_c64 };
+static const int *grip_btn[] = { NULL, NULL, grip_btn_gp, grip_btn_c64 };
-static char *grip_name[] = { NULL, NULL, "Gravis Grip Pad", "Commodore 64 Joystick" };
+static const char *grip_name[] = { NULL, NULL, "Gravis Grip Pad", "Commodore 64 Joystick" };
static const int init_seq[] = {
1, 0, 1, 1, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 1, 1, 0, 1, 0, 1, 0, 1, 0, 1,
@@ -104,9 +118,9 @@
/* Maps multiport directional values to X,Y axis values (each axis encoded in 3 bits) */
-static int axis_map[] = { 5, 9, 1, 5, 6, 10, 2, 6, 4, 8, 0, 4, 5, 9, 1, 5 };
+static const int axis_map[] = { 5, 9, 1, 5, 6, 10, 2, 6, 4, 8, 0, 4, 5, 9, 1, 5 };
-static void register_slot(int i, struct grip_mp *grip);
+static int register_slot(int i, struct grip_mp *grip);
/*
* Returns whether an odd or even number of bits are on in pkt.
@@ -353,9 +367,10 @@
static int get_and_decode_packet(struct grip_mp *grip, int flags)
{
+ struct grip_port *port;
u32 packet;
int joytype = 0;
- int slot = 0;
+ int slot;
/* Get a packet and check for validity */
@@ -377,6 +392,8 @@
if ((slot < 0) || (slot > 3))
return flags;
+ port = grip->port[slot];
+
/*
* Handle "reset" packets, which occur at startup, and when gamepads
* are removed or plugged in. May contain configuration of a new gamepad.
@@ -385,14 +402,14 @@
joytype = (packet >> 16) & 0x1f;
if (!joytype) {
- if (grip->registered[slot]) {
+ if (port->registered) {
printk(KERN_INFO "grip_mp: removing %s, slot %d\n",
- grip_name[grip->mode[slot]], slot);
- input_unregister_device(grip->dev + slot);
- grip->registered[slot] = 0;
+ grip_name[port->mode], slot);
+ input_unregister_device(port->dev);
+ port->registered = 0;
}
dbg("Reset: grip multiport slot %d\n", slot);
- grip->mode[slot] = GRIP_MODE_RESET;
+ port->mode = GRIP_MODE_RESET;
flags |= IO_SLOT_CHANGE;
return flags;
}
@@ -402,17 +419,17 @@
if (joytype == 0x1f) {
int dir = (packet >> 8) & 0xf; /* eight way directional value */
- grip->buttons[slot] = (~packet) & 0xff;
- grip->yaxes[slot] = ((axis_map[dir] >> 2) & 3) - 1;
- grip->xaxes[slot] = (axis_map[dir] & 3) - 1;
- grip->dirty[slot] = 1;
+ port->buttons = (~packet) & 0xff;
+ port->yaxes = ((axis_map[dir] >> 2) & 3) - 1;
+ port->xaxes = (axis_map[dir] & 3) - 1;
+ port->dirty = 1;
- if (grip->mode[slot] == GRIP_MODE_RESET)
+ if (port->mode == GRIP_MODE_RESET)
flags |= IO_SLOT_CHANGE;
- grip->mode[slot] = GRIP_MODE_GP;
+ port->mode = GRIP_MODE_GP;
- if (!grip->registered[slot]) {
+ if (!port->registered) {
dbg("New Grip pad in multiport slot %d.\n", slot);
register_slot(slot, grip);
}
@@ -445,9 +462,9 @@
return 0;
for (slot = 0; slot < 4; slot++) {
- if (grip->mode[slot] == GRIP_MODE_RESET)
+ if (grip->port[slot]->mode == GRIP_MODE_RESET)
invalid = 1;
- if (grip->mode[slot] != GRIP_MODE_NONE)
+ if (grip->port[slot]->mode != GRIP_MODE_NONE)
active = 1;
}
@@ -484,7 +501,7 @@
/* Get packets, store multiport state, and check state's validity */
for (tries = 0; tries < 4096; tries++) {
- if ( slots_valid(grip) ) {
+ if (slots_valid(grip)) {
initialized = 1;
break;
}
@@ -499,24 +516,24 @@
static void report_slot(struct grip_mp *grip, int slot)
{
- struct input_dev *dev = &(grip->dev[slot]);
- int i, buttons = grip->buttons[slot];
+ struct grip_port *port = grip->port[slot];
+ int i;
/* Store button states with linux input driver */
for (i = 0; i < 8; i++)
- input_report_key(dev, grip_btn_gp[i], (buttons >> i) & 1);
+ input_report_key(port->dev, grip_btn_gp[i], (port->buttons >> i) & 1);
/* Store axis states with linux driver */
- input_report_abs(dev, ABS_X, grip->xaxes[slot]);
- input_report_abs(dev, ABS_Y, grip->yaxes[slot]);
+ input_report_abs(port->dev, ABS_X, port->xaxes);
+ input_report_abs(port->dev, ABS_Y, port->yaxes);
/* Tell the receiver of the events to process them */
- input_sync(dev);
+ input_sync(port->dev);
- grip->dirty[slot] = 0;
+ port->dirty = 0;
}
/*
@@ -540,7 +557,7 @@
}
for (i = 0; i < 4; i++)
- if (grip->dirty[i])
+ if (grip->port[i]->dirty)
report_slot(grip, i);
}
@@ -571,35 +588,43 @@
* Tell the linux input layer about a newly plugged-in gamepad.
*/
-static void register_slot(int slot, struct grip_mp *grip)
+static int register_slot(int slot, struct grip_mp *grip)
{
+ struct grip_port *port = grip->port[slot];
+ struct input_dev *input_dev;
int j, t;
- grip->dev[slot].private = grip;
- grip->dev[slot].open = grip_open;
- grip->dev[slot].close = grip_close;
- grip->dev[slot].name = grip_name[grip->mode[slot]];
- grip->dev[slot].id.bustype = BUS_GAMEPORT;
- grip->dev[slot].id.vendor = GAMEPORT_ID_VENDOR_GRAVIS;
- grip->dev[slot].id.product = 0x0100 + grip->mode[slot];
- grip->dev[slot].id.version = 0x0100;
- grip->dev[slot].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ port->dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
- for (j = 0; (t = grip_abs[grip->mode[slot]][j]) >= 0; j++)
- input_set_abs_params(&grip->dev[slot], t, -1, 1, 0, 0);
+ input_dev->name = grip_name[port->mode];
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_GRAVIS;
+ input_dev->id.product = 0x0100 + port->mode;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &grip->gameport->dev;
+ input_dev->private = grip;
- for (j = 0; (t = grip_btn[grip->mode[slot]][j]) >= 0; j++)
+ input_dev->open = grip_open;
+ input_dev->close = grip_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (j = 0; (t = grip_abs[port->mode][j]) >= 0; j++)
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
+
+ for (j = 0; (t = grip_btn[port->mode][j]) >= 0; j++)
if (t > 0)
- set_bit(t, grip->dev[slot].keybit);
+ set_bit(t, input_dev->keybit);
- input_register_device(grip->dev + slot);
- grip->registered[slot] = 1;
+ input_register_device(port->dev);
+ port->registered = 1;
- if (grip->dirty[slot]) /* report initial state, if any */
+ if (port->dirty) /* report initial state, if any */
report_slot(grip, slot);
- printk(KERN_INFO "grip_mp: added %s, slot %d\n",
- grip_name[grip->mode[slot]], slot);
+ return 0;
}
static int grip_connect(struct gameport *gameport, struct gameport_driver *drv)
@@ -626,7 +651,7 @@
goto fail2;
}
- if (!grip->mode[0] && !grip->mode[1] && !grip->mode[2] && !grip->mode[3]) {
+ if (!grip->port[0]->mode && !grip->port[1]->mode && !grip->port[2]->mode && !grip->port[3]->mode) {
/* nothing plugged in */
err = -ENODEV;
goto fail2;
@@ -646,8 +671,8 @@
int i;
for (i = 0; i < 4; i++)
- if (grip->registered[i])
- input_unregister_device(grip->dev + i);
+ if (grip->port[i]->registered)
+ input_unregister_device(grip->port[i]->dev);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(grip);
diff --git a/drivers/input/joystick/guillemot.c b/drivers/input/joystick/guillemot.c
index 6a70ec4..c528473 100644
--- a/drivers/input/joystick/guillemot.c
+++ b/drivers/input/joystick/guillemot.c
@@ -67,7 +67,7 @@
struct guillemot {
struct gameport *gameport;
- struct input_dev dev;
+ struct input_dev *dev;
int bads;
int reads;
struct guillemot_type *type;
@@ -123,7 +123,7 @@
static void guillemot_poll(struct gameport *gameport)
{
struct guillemot *guillemot = gameport_get_drvdata(gameport);
- struct input_dev *dev = &guillemot->dev;
+ struct input_dev *dev = guillemot->dev;
u8 data[GUILLEMOT_MAX_LENGTH];
int i;
@@ -179,14 +179,20 @@
static int guillemot_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct guillemot *guillemot;
+ struct input_dev *input_dev;
u8 data[GUILLEMOT_MAX_LENGTH];
int i, t;
int err;
- if (!(guillemot = kzalloc(sizeof(struct guillemot), GFP_KERNEL)))
- return -ENOMEM;
+ guillemot = kzalloc(sizeof(struct guillemot), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!guillemot || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
guillemot->gameport = gameport;
+ guillemot->dev = input_dev;
gameport_set_drvdata(gameport, guillemot);
@@ -216,41 +222,40 @@
gameport_set_poll_interval(gameport, 20);
sprintf(guillemot->phys, "%s/input0", gameport->phys);
-
guillemot->type = guillemot_type + i;
- guillemot->dev.private = guillemot;
- guillemot->dev.open = guillemot_open;
- guillemot->dev.close = guillemot_close;
+ input_dev->name = guillemot_type[i].name;
+ input_dev->phys = guillemot->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_GUILLEMOT;
+ input_dev->id.product = guillemot_type[i].id;
+ input_dev->id.version = (int)data[14] << 8 | data[15];
+ input_dev->cdev.dev = &gameport->dev;
+ input_dev->private = guillemot;
- guillemot->dev.name = guillemot_type[i].name;
- guillemot->dev.phys = guillemot->phys;
- guillemot->dev.id.bustype = BUS_GAMEPORT;
- guillemot->dev.id.vendor = GAMEPORT_ID_VENDOR_GUILLEMOT;
- guillemot->dev.id.product = guillemot_type[i].id;
- guillemot->dev.id.version = (int)data[14] << 8 | data[15];
+ input_dev->open = guillemot_open;
+ input_dev->close = guillemot_close;
- guillemot->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = 0; (t = guillemot->type->abs[i]) >= 0; i++)
- input_set_abs_params(&guillemot->dev, t, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, t, 0, 255, 0, 0);
if (guillemot->type->hat) {
- input_set_abs_params(&guillemot->dev, ABS_HAT0X, -1, 1, 0, 0);
- input_set_abs_params(&guillemot->dev, ABS_HAT0Y, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_HAT0Y, -1, 1, 0, 0);
}
for (i = 0; (t = guillemot->type->btn[i]) >= 0; i++)
- set_bit(t, guillemot->dev.keybit);
+ set_bit(t, input_dev->keybit);
- input_register_device(&guillemot->dev);
- printk(KERN_INFO "input: %s ver %d.%02d on %s\n",
- guillemot->type->name, data[14], data[15], gameport->phys);
+ input_register_device(guillemot->dev);
return 0;
fail2: gameport_close(gameport);
fail1: gameport_set_drvdata(gameport, NULL);
+ input_free_device(input_dev);
kfree(guillemot);
return err;
}
@@ -260,7 +265,7 @@
struct guillemot *guillemot = gameport_get_drvdata(gameport);
printk(KERN_INFO "guillemot.c: Failed %d reads out of %d on %s\n", guillemot->reads, guillemot->bads, guillemot->phys);
- input_unregister_device(&guillemot->dev);
+ input_unregister_device(guillemot->dev);
gameport_close(gameport);
kfree(guillemot);
}
diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c
index e31b7b9..64b9c31 100644
--- a/drivers/input/joystick/iforce/iforce-main.c
+++ b/drivers/input/joystick/iforce/iforce-main.c
@@ -144,7 +144,7 @@
int is_update;
/* Check this effect type is supported by this device */
- if (!test_bit(effect->type, iforce->dev.ffbit))
+ if (!test_bit(effect->type, iforce->dev->ffbit))
return -EINVAL;
/*
@@ -152,30 +152,31 @@
*/
if (effect->id == -1) {
- for (id=0; id < FF_EFFECTS_MAX; ++id)
- if (!test_and_set_bit(FF_CORE_IS_USED, iforce->core_effects[id].flags)) break;
+ for (id = 0; id < FF_EFFECTS_MAX; ++id)
+ if (!test_and_set_bit(FF_CORE_IS_USED, iforce->core_effects[id].flags))
+ break;
- if ( id == FF_EFFECTS_MAX || id >= iforce->dev.ff_effects_max)
+ if (id == FF_EFFECTS_MAX || id >= iforce->dev->ff_effects_max)
return -ENOMEM;
effect->id = id;
iforce->core_effects[id].owner = current->pid;
- iforce->core_effects[id].flags[0] = (1<<FF_CORE_IS_USED); /* Only IS_USED bit must be set */
+ iforce->core_effects[id].flags[0] = (1 << FF_CORE_IS_USED); /* Only IS_USED bit must be set */
is_update = FALSE;
}
else {
/* We want to update an effect */
- if (!CHECK_OWNERSHIP(effect->id, iforce)) return -EACCES;
+ if (!CHECK_OWNERSHIP(effect->id, iforce))
+ return -EACCES;
/* Parameter type cannot be updated */
if (effect->type != iforce->core_effects[effect->id].effect.type)
return -EINVAL;
/* Check the effect is not already being updated */
- if (test_bit(FF_CORE_UPDATE, iforce->core_effects[effect->id].flags)) {
+ if (test_bit(FF_CORE_UPDATE, iforce->core_effects[effect->id].flags))
return -EAGAIN;
- }
is_update = TRUE;
}
@@ -339,15 +340,19 @@
int iforce_init_device(struct iforce *iforce)
{
+ struct input_dev *input_dev;
unsigned char c[] = "CEOV";
int i;
+ input_dev = input_allocate_device();
+ if (input_dev)
+ return -ENOMEM;
+
init_waitqueue_head(&iforce->wait);
spin_lock_init(&iforce->xmit_lock);
init_MUTEX(&iforce->mem_mutex);
iforce->xmit.buf = iforce->xmit_data;
-
- iforce->dev.ff_effects_max = 10;
+ iforce->dev = input_dev;
/*
* Input device fields.
@@ -356,26 +361,27 @@
switch (iforce->bus) {
#ifdef CONFIG_JOYSTICK_IFORCE_USB
case IFORCE_USB:
- iforce->dev.id.bustype = BUS_USB;
- iforce->dev.dev = &iforce->usbdev->dev;
+ input_dev->id.bustype = BUS_USB;
+ input_dev->cdev.dev = &iforce->usbdev->dev;
break;
#endif
#ifdef CONFIG_JOYSTICK_IFORCE_232
case IFORCE_232:
- iforce->dev.id.bustype = BUS_RS232;
- iforce->dev.dev = &iforce->serio->dev;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->cdev.dev = &iforce->serio->dev;
break;
#endif
}
- iforce->dev.private = iforce;
- iforce->dev.name = "Unknown I-Force device";
- iforce->dev.open = iforce_open;
- iforce->dev.close = iforce_release;
- iforce->dev.flush = iforce_flush;
- iforce->dev.event = iforce_input_event;
- iforce->dev.upload_effect = iforce_upload_effect;
- iforce->dev.erase_effect = iforce_erase_effect;
+ input_dev->private = iforce;
+ input_dev->name = "Unknown I-Force device";
+ input_dev->open = iforce_open;
+ input_dev->close = iforce_release;
+ input_dev->flush = iforce_flush;
+ input_dev->event = iforce_input_event;
+ input_dev->upload_effect = iforce_upload_effect;
+ input_dev->erase_effect = iforce_erase_effect;
+ input_dev->ff_effects_max = 10;
/*
* On-device memory allocation.
@@ -399,7 +405,8 @@
if (i == 20) { /* 5 seconds */
printk(KERN_ERR "iforce-main.c: Timeout waiting for response from device.\n");
- return -1;
+ input_free_device(input_dev);
+ return -ENODEV;
}
/*
@@ -407,12 +414,12 @@
*/
if (!iforce_get_id_packet(iforce, "M"))
- iforce->dev.id.vendor = (iforce->edata[2] << 8) | iforce->edata[1];
+ input_dev->id.vendor = (iforce->edata[2] << 8) | iforce->edata[1];
else
printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet M\n");
if (!iforce_get_id_packet(iforce, "P"))
- iforce->dev.id.product = (iforce->edata[2] << 8) | iforce->edata[1];
+ input_dev->id.product = (iforce->edata[2] << 8) | iforce->edata[1];
else
printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet P\n");
@@ -422,15 +429,15 @@
printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet B\n");
if (!iforce_get_id_packet(iforce, "N"))
- iforce->dev.ff_effects_max = iforce->edata[1];
+ iforce->dev->ff_effects_max = iforce->edata[1];
else
printk(KERN_WARNING "iforce-main.c: Device does not respond to id packet N\n");
/* Check if the device can store more effects than the driver can really handle */
- if (iforce->dev.ff_effects_max > FF_EFFECTS_MAX) {
+ if (iforce->dev->ff_effects_max > FF_EFFECTS_MAX) {
printk(KERN_WARNING "input??: Device can handle %d effects, but N_EFFECTS_MAX is set to %d in iforce.h\n",
- iforce->dev.ff_effects_max, FF_EFFECTS_MAX);
- iforce->dev.ff_effects_max = FF_EFFECTS_MAX;
+ iforce->dev->ff_effects_max, FF_EFFECTS_MAX);
+ iforce->dev->ff_effects_max = FF_EFFECTS_MAX;
}
/*
@@ -453,29 +460,28 @@
*/
for (i = 0; iforce_device[i].idvendor; i++)
- if (iforce_device[i].idvendor == iforce->dev.id.vendor &&
- iforce_device[i].idproduct == iforce->dev.id.product)
+ if (iforce_device[i].idvendor == input_dev->id.vendor &&
+ iforce_device[i].idproduct == input_dev->id.product)
break;
iforce->type = iforce_device + i;
- iforce->dev.name = iforce->type->name;
+ input_dev->name = iforce->type->name;
/*
* Set input device bitfields and ranges.
*/
- iforce->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_FF) | BIT(EV_FF_STATUS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_FF) | BIT(EV_FF_STATUS);
for (i = 0; iforce->type->btn[i] >= 0; i++) {
signed short t = iforce->type->btn[i];
- set_bit(t, iforce->dev.keybit);
+ set_bit(t, input_dev->keybit);
}
- set_bit(BTN_DEAD, iforce->dev.keybit);
+ set_bit(BTN_DEAD, input_dev->keybit);
for (i = 0; iforce->type->abs[i] >= 0; i++) {
signed short t = iforce->type->abs[i];
- set_bit(t, iforce->dev.absbit);
switch (t) {
@@ -483,52 +489,42 @@
case ABS_Y:
case ABS_WHEEL:
- iforce->dev.absmax[t] = 1920;
- iforce->dev.absmin[t] = -1920;
- iforce->dev.absflat[t] = 128;
- iforce->dev.absfuzz[t] = 16;
-
- set_bit(t, iforce->dev.ffbit);
+ input_set_abs_params(input_dev, t, -1920, 1920, 16, 128);
+ set_bit(t, input_dev->ffbit);
break;
case ABS_THROTTLE:
case ABS_GAS:
case ABS_BRAKE:
- iforce->dev.absmax[t] = 255;
- iforce->dev.absmin[t] = 0;
+ input_set_abs_params(input_dev, t, 0, 255, 0, 0);
break;
case ABS_RUDDER:
- iforce->dev.absmax[t] = 127;
- iforce->dev.absmin[t] = -128;
+ input_set_abs_params(input_dev, t, -128, 127, 0, 0);
break;
case ABS_HAT0X:
case ABS_HAT0Y:
case ABS_HAT1X:
case ABS_HAT1Y:
- iforce->dev.absmax[t] = 1;
- iforce->dev.absmin[t] = -1;
+
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
break;
}
}
for (i = 0; iforce->type->ff[i] >= 0; i++)
- set_bit(iforce->type->ff[i], iforce->dev.ffbit);
+ set_bit(iforce->type->ff[i], input_dev->ffbit);
/*
* Register input device.
*/
- input_register_device(&iforce->dev);
+ input_register_device(iforce->dev);
- printk(KERN_DEBUG "iforce->dev.open = %p\n", iforce->dev.open);
-
- printk(KERN_INFO "input: %s [%d effects, %ld bytes memory]\n",
- iforce->dev.name, iforce->dev.ff_effects_max,
- iforce->device_memory.end);
+ printk(KERN_DEBUG "iforce->dev->open = %p\n", iforce->dev->open);
return 0;
}
diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c
index e5a31e5..4a26292 100644
--- a/drivers/input/joystick/iforce/iforce-packets.c
+++ b/drivers/input/joystick/iforce/iforce-packets.c
@@ -139,7 +139,8 @@
static int mark_core_as_ready(struct iforce *iforce, unsigned short addr)
{
int i;
- for (i=0; i<iforce->dev.ff_effects_max; ++i) {
+
+ for (i = 0; i < iforce->dev->ff_effects_max; ++i) {
if (test_bit(FF_CORE_IS_USED, iforce->core_effects[i].flags) &&
(iforce->core_effects[i].mod1_chunk.start == addr ||
iforce->core_effects[i].mod2_chunk.start == addr)) {
@@ -153,7 +154,7 @@
void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data, struct pt_regs *regs)
{
- struct input_dev *dev = &iforce->dev;
+ struct input_dev *dev = iforce->dev;
int i;
static int being_used = 0;
diff --git a/drivers/input/joystick/iforce/iforce-serio.c b/drivers/input/joystick/iforce/iforce-serio.c
index 11f5190..64a78c5 100644
--- a/drivers/input/joystick/iforce/iforce-serio.c
+++ b/drivers/input/joystick/iforce/iforce-serio.c
@@ -131,11 +131,10 @@
struct iforce *iforce;
int err;
- if (!(iforce = kmalloc(sizeof(struct iforce), GFP_KERNEL)))
+ iforce = kzalloc(sizeof(struct iforce), GFP_KERNEL);
+ if (!iforce)
return -ENOMEM;
- memset(iforce, 0, sizeof(struct iforce));
-
iforce->bus = IFORCE_232;
iforce->serio = serio;
@@ -148,7 +147,8 @@
return err;
}
- if (iforce_init_device(iforce)) {
+ err = iforce_init_device(iforce);
+ if (err) {
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(iforce);
@@ -162,7 +162,7 @@
{
struct iforce *iforce = serio_get_drvdata(serio);
- input_unregister_device(&iforce->dev);
+ input_unregister_device(iforce->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(iforce);
diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c
index 58600f9..64b4a30 100644
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -135,28 +135,24 @@
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *epirq, *epout;
struct iforce *iforce;
+ int err = -ENOMEM;
interface = intf->cur_altsetting;
epirq = &interface->endpoint[0].desc;
epout = &interface->endpoint[1].desc;
- if (!(iforce = kmalloc(sizeof(struct iforce) + 32, GFP_KERNEL)))
+ if (!(iforce = kzalloc(sizeof(struct iforce) + 32, GFP_KERNEL)))
goto fail;
- memset(iforce, 0, sizeof(struct iforce));
-
- if (!(iforce->irq = usb_alloc_urb(0, GFP_KERNEL))) {
+ if (!(iforce->irq = usb_alloc_urb(0, GFP_KERNEL)))
goto fail;
- }
- if (!(iforce->out = usb_alloc_urb(0, GFP_KERNEL))) {
+ if (!(iforce->out = usb_alloc_urb(0, GFP_KERNEL)))
goto fail;
- }
- if (!(iforce->ctrl = usb_alloc_urb(0, GFP_KERNEL))) {
+ if (!(iforce->ctrl = usb_alloc_urb(0, GFP_KERNEL)))
goto fail;
- }
iforce->bus = IFORCE_USB;
iforce->usbdev = dev;
@@ -174,7 +170,9 @@
usb_fill_control_urb(iforce->ctrl, dev, usb_rcvctrlpipe(dev, 0),
(void*) &iforce->cr, iforce->edata, 16, iforce_usb_ctrl, iforce);
- if (iforce_init_device(iforce)) goto fail;
+ err = iforce_init_device(iforce);
+ if (err)
+ goto fail;
usb_set_intfdata(intf, iforce);
return 0;
@@ -187,7 +185,7 @@
kfree(iforce);
}
- return -ENODEV;
+ return err;
}
/* Called by iforce_delete() */
@@ -211,7 +209,7 @@
usb_set_intfdata(intf, NULL);
if (iforce) {
iforce->usbdev = NULL;
- input_unregister_device(&iforce->dev);
+ input_unregister_device(iforce->dev);
if (!open) {
iforce_delete_device(iforce);
diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h
index bce247b..146f406 100644
--- a/drivers/input/joystick/iforce/iforce.h
+++ b/drivers/input/joystick/iforce/iforce.h
@@ -117,7 +117,7 @@
};
struct iforce {
- struct input_dev dev; /* Input device interface */
+ struct input_dev *dev; /* Input device interface */
struct iforce_device *type;
int bus;
diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c
index d7b3472..8511ee7 100644
--- a/drivers/input/joystick/interact.c
+++ b/drivers/input/joystick/interact.c
@@ -54,7 +54,7 @@
struct interact {
struct gameport *gameport;
- struct input_dev dev;
+ struct input_dev *dev;
int bads;
int reads;
unsigned char type;
@@ -130,7 +130,7 @@
static void interact_poll(struct gameport *gameport)
{
struct interact *interact = gameport_get_drvdata(gameport);
- struct input_dev *dev = &interact->dev;
+ struct input_dev *dev = interact->dev;
u32 data[3];
int i;
@@ -208,14 +208,20 @@
static int interact_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct interact *interact;
+ struct input_dev *input_dev;
__u32 data[3];
int i, t;
int err;
- if (!(interact = kzalloc(sizeof(struct interact), GFP_KERNEL)))
- return -ENOMEM;
+ interact = kzalloc(sizeof(struct interact), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!interact || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
interact->gameport = gameport;
+ interact->dev = input_dev;
gameport_set_drvdata(gameport, interact);
@@ -249,41 +255,40 @@
interact->type = i;
interact->length = interact_type[i].length;
- interact->dev.private = interact;
- interact->dev.open = interact_open;
- interact->dev.close = interact_close;
+ input_dev->name = interact_type[i].name;
+ input_dev->phys = interact->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_INTERACT;
+ input_dev->id.product = interact_type[i].id;
+ input_dev->id.version = 0x0100;
+ input_dev->private = interact;
- interact->dev.name = interact_type[i].name;
- interact->dev.phys = interact->phys;
- interact->dev.id.bustype = BUS_GAMEPORT;
- interact->dev.id.vendor = GAMEPORT_ID_VENDOR_INTERACT;
- interact->dev.id.product = interact_type[i].id;
- interact->dev.id.version = 0x0100;
+ input_dev->open = interact_open;
+ input_dev->close = interact_close;
- interact->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (i = 0; (t = interact_type[interact->type].abs[i]) >= 0; i++) {
- set_bit(t, interact->dev.absbit);
+ set_bit(t, input_dev->absbit);
if (i < interact_type[interact->type].b8) {
- interact->dev.absmin[t] = 0;
- interact->dev.absmax[t] = 255;
+ input_dev->absmin[t] = 0;
+ input_dev->absmax[t] = 255;
} else {
- interact->dev.absmin[t] = -1;
- interact->dev.absmax[t] = 1;
+ input_dev->absmin[t] = -1;
+ input_dev->absmax[t] = 1;
}
}
for (i = 0; (t = interact_type[interact->type].btn[i]) >= 0; i++)
- set_bit(t, interact->dev.keybit);
+ set_bit(t, input_dev->keybit);
- input_register_device(&interact->dev);
- printk(KERN_INFO "input: %s on %s\n",
- interact_type[interact->type].name, gameport->phys);
+ input_register_device(interact->dev);
return 0;
fail2: gameport_close(gameport);
fail1: gameport_set_drvdata(gameport, NULL);
+ input_free_device(input_dev);
kfree(interact);
return err;
}
@@ -292,7 +297,7 @@
{
struct interact *interact = gameport_get_drvdata(gameport);
- input_unregister_device(&interact->dev);
+ input_unregister_device(interact->dev);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(interact);
diff --git a/drivers/input/joystick/magellan.c b/drivers/input/joystick/magellan.c
index 1ba5036..ca3cc23 100644
--- a/drivers/input/joystick/magellan.c
+++ b/drivers/input/joystick/magellan.c
@@ -49,14 +49,13 @@
static int magellan_buttons[] = { BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8 };
static int magellan_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ };
-static char *magellan_name = "LogiCad3D Magellan / SpaceMouse";
/*
* Per-Magellan data.
*/
struct magellan {
- struct input_dev dev;
+ struct input_dev *dev;
int idx;
unsigned char data[MAGELLAN_MAX_LENGTH];
char phys[32];
@@ -85,7 +84,7 @@
static void magellan_process_packet(struct magellan* magellan, struct pt_regs *regs)
{
- struct input_dev *dev = &magellan->dev;
+ struct input_dev *dev = magellan->dev;
unsigned char *data = magellan->data;
int i, t;
@@ -138,9 +137,9 @@
{
struct magellan* magellan = serio_get_drvdata(serio);
- input_unregister_device(&magellan->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(magellan->dev);
kfree(magellan);
}
@@ -153,52 +152,48 @@
static int magellan_connect(struct serio *serio, struct serio_driver *drv)
{
struct magellan *magellan;
- int i, t;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+ int i;
- if (!(magellan = kmalloc(sizeof(struct magellan), GFP_KERNEL)))
- return -ENOMEM;
+ magellan = kzalloc(sizeof(struct magellan), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!magellan || !input_dev)
+ goto fail;
- memset(magellan, 0, sizeof(struct magellan));
-
- magellan->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (i = 0; i < 9; i++)
- set_bit(magellan_buttons[i], magellan->dev.keybit);
-
- for (i = 0; i < 6; i++) {
- t = magellan_axes[i];
- set_bit(t, magellan->dev.absbit);
- magellan->dev.absmin[t] = -360;
- magellan->dev.absmax[t] = 360;
- }
-
+ magellan->dev = input_dev;
sprintf(magellan->phys, "%s/input0", serio->phys);
- init_input_dev(&magellan->dev);
- magellan->dev.private = magellan;
- magellan->dev.name = magellan_name;
- magellan->dev.phys = magellan->phys;
- magellan->dev.id.bustype = BUS_RS232;
- magellan->dev.id.vendor = SERIO_MAGELLAN;
- magellan->dev.id.product = 0x0001;
- magellan->dev.id.version = 0x0100;
- magellan->dev.dev = &serio->dev;
+ input_dev->name = "LogiCad3D Magellan / SpaceMouse";
+ input_dev->phys = magellan->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_MAGELLAN;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = magellan;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (i = 0; i < 9; i++)
+ set_bit(magellan_buttons[i], input_dev->keybit);
+
+ for (i = 0; i < 6; i++)
+ input_set_abs_params(input_dev, magellan_axes[i], -360, 360, 0, 0);
serio_set_drvdata(serio, magellan);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(magellan);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&magellan->dev);
-
- printk(KERN_INFO "input: %s on %s\n", magellan_name, serio->phys);
-
+ input_register_device(magellan->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(magellan);
+ return err;
}
/*
diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c
index 9e03537..eaaad45 100644
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@@ -113,7 +113,7 @@
struct sw {
struct gameport *gameport;
- struct input_dev dev[4];
+ struct input_dev *dev[4];
char name[64];
char phys[4][32];
int length;
@@ -301,7 +301,7 @@
static int sw_parse(unsigned char *buf, struct sw *sw)
{
int hat, i, j;
- struct input_dev *dev = sw->dev;
+ struct input_dev *dev;
switch (sw->type) {
@@ -310,6 +310,8 @@
if (sw_check(GB(0,64)) || (hat = (GB(6,1) << 3) | GB(60,3)) > 8)
return -1;
+ dev = sw->dev[0];
+
input_report_abs(dev, ABS_X, (GB( 3,3) << 7) | GB(16,7));
input_report_abs(dev, ABS_Y, (GB( 0,3) << 7) | GB(24,7));
input_report_abs(dev, ABS_RZ, (GB(35,2) << 7) | GB(40,7));
@@ -335,13 +337,13 @@
if (sw_parity(GB(i*15,15)))
return -1;
- input_report_abs(dev + i, ABS_X, GB(i*15+3,1) - GB(i*15+2,1));
- input_report_abs(dev + i, ABS_Y, GB(i*15+0,1) - GB(i*15+1,1));
+ input_report_abs(sw->dev[i], ABS_X, GB(i*15+3,1) - GB(i*15+2,1));
+ input_report_abs(sw->dev[i], ABS_Y, GB(i*15+0,1) - GB(i*15+1,1));
for (j = 0; j < 10; j++)
- input_report_key(dev + i, sw_btn[SW_ID_GP][j], !GB(i*15+j+4,1));
+ input_report_key(sw->dev[i], sw_btn[SW_ID_GP][j], !GB(i*15+j+4,1));
- input_sync(dev + i);
+ input_sync(sw->dev[i]);
}
return 0;
@@ -352,6 +354,7 @@
if (!sw_parity(GB(0,48)) || (hat = GB(42,4)) > 8)
return -1;
+ dev = sw->dev[0];
input_report_abs(dev, ABS_X, GB( 9,10));
input_report_abs(dev, ABS_Y, GB(19,10));
input_report_abs(dev, ABS_RZ, GB(36, 6));
@@ -372,6 +375,7 @@
if (!sw_parity(GB(0,43)) || (hat = GB(28,4)) > 8)
return -1;
+ dev = sw->dev[0];
input_report_abs(dev, ABS_X, GB( 0,10));
input_report_abs(dev, ABS_Y, GB(16,10));
input_report_abs(dev, ABS_THROTTLE, GB(32, 6));
@@ -396,6 +400,7 @@
if (!sw_parity(GB(0,33)))
return -1;
+ dev = sw->dev[0];
input_report_abs(dev, ABS_RX, GB( 0,10));
input_report_abs(dev, ABS_RUDDER, GB(10, 6));
input_report_abs(dev, ABS_THROTTLE, GB(16, 6));
@@ -581,6 +586,7 @@
static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
{
struct sw *sw;
+ struct input_dev *input_dev;
int i, j, k, l;
int err;
unsigned char *buf = NULL; /* [SW_LENGTH] */
@@ -729,42 +735,50 @@
sprintf(sw->name, "Microsoft SideWinder %s", sw_name[sw->type]);
sprintf(sw->phys[i], "%s/input%d", gameport->phys, i);
- sw->dev[i].private = sw;
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ err = -ENOMEM;
+ goto fail3;
+ }
- sw->dev[i].open = sw_open;
- sw->dev[i].close = sw_close;
+ input_dev->name = sw->name;
+ input_dev->phys = sw->phys[i];
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_MICROSOFT;
+ input_dev->id.product = sw->type;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &gameport->dev;
+ input_dev->private = sw;
- sw->dev[i].name = sw->name;
- sw->dev[i].phys = sw->phys[i];
- sw->dev[i].id.bustype = BUS_GAMEPORT;
- sw->dev[i].id.vendor = GAMEPORT_ID_VENDOR_MICROSOFT;
- sw->dev[i].id.product = sw->type;
- sw->dev[i].id.version = 0x0100;
+ input_dev->open = sw_open;
+ input_dev->close = sw_close;
- sw->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
for (j = 0; (bits = sw_bit[sw->type][j]); j++) {
code = sw_abs[sw->type][j];
- set_bit(code, sw->dev[i].absbit);
- sw->dev[i].absmax[code] = (1 << bits) - 1;
- sw->dev[i].absmin[code] = (bits == 1) ? -1 : 0;
- sw->dev[i].absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0;
+ set_bit(code, input_dev->absbit);
+ input_dev->absmax[code] = (1 << bits) - 1;
+ input_dev->absmin[code] = (bits == 1) ? -1 : 0;
+ input_dev->absfuzz[code] = ((bits >> 1) >= 2) ? (1 << ((bits >> 1) - 2)) : 0;
if (code != ABS_THROTTLE)
- sw->dev[i].absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0;
+ input_dev->absflat[code] = (bits >= 5) ? (1 << (bits - 5)) : 0;
}
for (j = 0; (code = sw_btn[sw->type][j]); j++)
- set_bit(code, sw->dev[i].keybit);
+ set_bit(code, input_dev->keybit);
- input_register_device(sw->dev + i);
- printk(KERN_INFO "input: %s%s on %s [%d-bit id %d data %d]\n",
- sw->name, comment, gameport->phys, m, l, k);
+ dbg("%s%s [%d-bit id %d data %d]\n", sw->name, comment, m, l, k);
+
+ input_register_device(sw->dev[i]);
}
return 0;
-fail2: gameport_close(gameport);
-fail1: gameport_set_drvdata(gameport, NULL);
+ fail3: while (--i >= 0)
+ input_unregister_device(sw->dev[i]);
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
kfree(sw);
kfree(buf);
kfree(idbuf);
@@ -777,7 +791,7 @@
int i;
for (i = 0; i < sw->number; i++)
- input_unregister_device(sw->dev + i);
+ input_unregister_device(sw->dev[i]);
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(sw);
diff --git a/drivers/input/joystick/spaceball.c b/drivers/input/joystick/spaceball.c
index a436f22..d6f8db8 100644
--- a/drivers/input/joystick/spaceball.c
+++ b/drivers/input/joystick/spaceball.c
@@ -70,8 +70,7 @@
*/
struct spaceball {
- struct input_dev dev;
- struct serio *serio;
+ struct input_dev *dev;
int idx;
int escape;
unsigned char data[SPACEBALL_MAX_LENGTH];
@@ -85,7 +84,7 @@
static void spaceball_process_packet(struct spaceball* spaceball, struct pt_regs *regs)
{
- struct input_dev *dev = &spaceball->dev;
+ struct input_dev *dev = spaceball->dev;
unsigned char *data = spaceball->data;
int i;
@@ -193,9 +192,9 @@
{
struct spaceball* spaceball = serio_get_drvdata(serio);
- input_unregister_device(&spaceball->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(spaceball->dev);
kfree(spaceball);
}
@@ -208,69 +207,62 @@
static int spaceball_connect(struct serio *serio, struct serio_driver *drv)
{
struct spaceball *spaceball;
- int i, t, id;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+ int i, id;
if ((id = serio->id.id) > SPACEBALL_MAX_ID)
return -ENODEV;
- if (!(spaceball = kmalloc(sizeof(struct spaceball), GFP_KERNEL)))
- return - ENOMEM;
+ spaceball = kmalloc(sizeof(struct spaceball), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!spaceball || !input_dev)
+ goto fail;
- memset(spaceball, 0, sizeof(struct spaceball));
+ spaceball->dev = input_dev;
+ sprintf(spaceball->phys, "%s/input0", serio->phys);
- spaceball->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->name = spaceball_names[id];
+ input_dev->phys = spaceball->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_SPACEBALL;
+ input_dev->id.product = id;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = spaceball;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
switch (id) {
case SPACEBALL_4000FLX:
case SPACEBALL_4000FLX_L:
- spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_9);
- spaceball->dev.keybit[LONG(BTN_A)] |= BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_MODE);
+ input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_9);
+ input_dev->keybit[LONG(BTN_A)] |= BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_MODE);
default:
- spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4)
+ input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4)
| BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7) | BIT(BTN_8);
case SPACEBALL_3003C:
- spaceball->dev.keybit[LONG(BTN_0)] |= BIT(BTN_1) | BIT(BTN_8);
+ input_dev->keybit[LONG(BTN_0)] |= BIT(BTN_1) | BIT(BTN_8);
}
- for (i = 0; i < 6; i++) {
- t = spaceball_axes[i];
- set_bit(t, spaceball->dev.absbit);
- spaceball->dev.absmin[t] = i < 3 ? -8000 : -1600;
- spaceball->dev.absmax[t] = i < 3 ? 8000 : 1600;
- spaceball->dev.absflat[t] = i < 3 ? 40 : 8;
- spaceball->dev.absfuzz[t] = i < 3 ? 8 : 2;
+ for (i = 0; i < 3; i++) {
+ input_set_abs_params(input_dev, ABS_X + i, -8000, 8000, 8, 40);
+ input_set_abs_params(input_dev, ABS_RX + i, -1600, 1600, 2, 8);
}
- spaceball->serio = serio;
- spaceball->dev.private = spaceball;
-
- sprintf(spaceball->phys, "%s/input0", serio->phys);
-
- init_input_dev(&spaceball->dev);
- spaceball->dev.name = spaceball_names[id];
- spaceball->dev.phys = spaceball->phys;
- spaceball->dev.id.bustype = BUS_RS232;
- spaceball->dev.id.vendor = SERIO_SPACEBALL;
- spaceball->dev.id.product = id;
- spaceball->dev.id.version = 0x0100;
- spaceball->dev.dev = &serio->dev;
-
serio_set_drvdata(serio, spaceball);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(spaceball);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&spaceball->dev);
-
- printk(KERN_INFO "input: %s on serio%s\n",
- spaceball_names[id], serio->phys);
-
+ input_register_device(spaceball->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(spaceball);
+ return err;
}
/*
diff --git a/drivers/input/joystick/spaceorb.c b/drivers/input/joystick/spaceorb.c
index 01fd2e4..7c123a0 100644
--- a/drivers/input/joystick/spaceorb.c
+++ b/drivers/input/joystick/spaceorb.c
@@ -52,15 +52,13 @@
static int spaceorb_buttons[] = { BTN_TL, BTN_TR, BTN_Y, BTN_X, BTN_B, BTN_A };
static int spaceorb_axes[] = { ABS_X, ABS_Y, ABS_Z, ABS_RX, ABS_RY, ABS_RZ };
-static char *spaceorb_name = "SpaceTec SpaceOrb 360 / Avenger";
/*
* Per-Orb data.
*/
struct spaceorb {
- struct input_dev dev;
- struct serio *serio;
+ struct input_dev *dev;
int idx;
unsigned char data[SPACEORB_MAX_LENGTH];
char phys[32];
@@ -78,7 +76,7 @@
static void spaceorb_process_packet(struct spaceorb *spaceorb, struct pt_regs *regs)
{
- struct input_dev *dev = &spaceorb->dev;
+ struct input_dev *dev = spaceorb->dev;
unsigned char *data = spaceorb->data;
unsigned char c = 0;
int axes[6];
@@ -95,8 +93,8 @@
case 'R': /* Reset packet */
spaceorb->data[spaceorb->idx - 1] = 0;
for (i = 1; i < spaceorb->idx && spaceorb->data[i] == ' '; i++);
- printk(KERN_INFO "input: %s [%s] on %s\n",
- spaceorb_name, spaceorb->data + i, spaceorb->serio->phys);
+ printk(KERN_INFO "input: %s [%s] is %s\n",
+ dev->name, spaceorb->data + i, spaceorb->phys);
break;
case 'D': /* Ball + button data */
@@ -123,7 +121,7 @@
case 'E': /* Error packet */
if (spaceorb->idx != 4) return;
- printk(KERN_ERR "joy-spaceorb: Device error. [ ");
+ printk(KERN_ERR "spaceorb: Device error. [ ");
for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]);
printk("]\n");
break;
@@ -154,9 +152,9 @@
{
struct spaceorb* spaceorb = serio_get_drvdata(serio);
- input_unregister_device(&spaceorb->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(spaceorb->dev);
kfree(spaceorb);
}
@@ -169,52 +167,48 @@
static int spaceorb_connect(struct serio *serio, struct serio_driver *drv)
{
struct spaceorb *spaceorb;
- int i, t;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+ int i;
- if (!(spaceorb = kmalloc(sizeof(struct spaceorb), GFP_KERNEL)))
- return -ENOMEM;
+ spaceorb = kzalloc(sizeof(struct spaceorb), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!spaceorb || !input_dev)
+ goto fail;
- memset(spaceorb, 0, sizeof(struct spaceorb));
-
- spaceorb->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (i = 0; i < 6; i++)
- set_bit(spaceorb_buttons[i], spaceorb->dev.keybit);
-
- for (i = 0; i < 6; i++) {
- t = spaceorb_axes[i];
- set_bit(t, spaceorb->dev.absbit);
- spaceorb->dev.absmin[t] = -508;
- spaceorb->dev.absmax[t] = 508;
- }
-
- spaceorb->serio = serio;
- spaceorb->dev.private = spaceorb;
-
+ spaceorb->dev = input_dev;
sprintf(spaceorb->phys, "%s/input0", serio->phys);
- init_input_dev(&spaceorb->dev);
- spaceorb->dev.name = spaceorb_name;
- spaceorb->dev.phys = spaceorb->phys;
- spaceorb->dev.id.bustype = BUS_RS232;
- spaceorb->dev.id.vendor = SERIO_SPACEORB;
- spaceorb->dev.id.product = 0x0001;
- spaceorb->dev.id.version = 0x0100;
- spaceorb->dev.dev = &serio->dev;
+ input_dev->name = "SpaceTec SpaceOrb 360 / Avenger";
+ input_dev->phys = spaceorb->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_SPACEORB;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = spaceorb;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (i = 0; i < 6; i++)
+ set_bit(spaceorb_buttons[i], input_dev->keybit);
+
+ for (i = 0; i < 6; i++)
+ input_set_abs_params(input_dev, spaceorb_axes[i], -508, 508, 0, 0);
serio_set_drvdata(serio, spaceorb);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(spaceorb);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&spaceorb->dev);
-
+ input_register_device(spaceorb->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(spaceorb);
+ return err;
}
/*
diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c
index 6f6e675..0a9ed1d 100644
--- a/drivers/input/joystick/stinger.c
+++ b/drivers/input/joystick/stinger.c
@@ -48,14 +48,12 @@
#define STINGER_MAX_LENGTH 8
-static char *stinger_name = "Gravis Stinger";
-
/*
* Per-Stinger data.
*/
struct stinger {
- struct input_dev dev;
+ struct input_dev *dev;
int idx;
unsigned char data[STINGER_MAX_LENGTH];
char phys[32];
@@ -68,7 +66,7 @@
static void stinger_process_packet(struct stinger *stinger, struct pt_regs *regs)
{
- struct input_dev *dev = &stinger->dev;
+ struct input_dev *dev = stinger->dev;
unsigned char *data = stinger->data;
if (!stinger->idx) return;
@@ -126,9 +124,9 @@
{
struct stinger *stinger = serio_get_drvdata(serio);
- input_unregister_device(&stinger->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(stinger->dev);
kfree(stinger);
}
@@ -141,53 +139,46 @@
static int stinger_connect(struct serio *serio, struct serio_driver *drv)
{
struct stinger *stinger;
- int i;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
- if (!(stinger = kmalloc(sizeof(struct stinger), GFP_KERNEL)))
- return -ENOMEM;
+ stinger = kmalloc(sizeof(struct stinger), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!stinger || !input_dev)
+ goto fail;
- memset(stinger, 0, sizeof(struct stinger));
-
- stinger->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- stinger->dev.keybit[LONG(BTN_A)] = BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_X) | \
- BIT(BTN_Y) | BIT(BTN_Z) | BIT(BTN_TL) | BIT(BTN_TR) | \
- BIT(BTN_START) | BIT(BTN_SELECT);
- stinger->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
-
+ stinger->dev = input_dev;
sprintf(stinger->phys, "%s/serio0", serio->phys);
- init_input_dev(&stinger->dev);
- stinger->dev.name = stinger_name;
- stinger->dev.phys = stinger->phys;
- stinger->dev.id.bustype = BUS_RS232;
- stinger->dev.id.vendor = SERIO_STINGER;
- stinger->dev.id.product = 0x0001;
- stinger->dev.id.version = 0x0100;
- stinger->dev.dev = &serio->dev;
+ input_dev->name = "Gravis Stinger";
+ input_dev->phys = stinger->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_STINGER;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = stinger;
- for (i = 0; i < 2; i++) {
- stinger->dev.absmax[ABS_X+i] = 64;
- stinger->dev.absmin[ABS_X+i] = -64;
- stinger->dev.absflat[ABS_X+i] = 4;
- }
-
- stinger->dev.private = stinger;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_A)] = BIT(BTN_A) | BIT(BTN_B) | BIT(BTN_C) | BIT(BTN_X) |
+ BIT(BTN_Y) | BIT(BTN_Z) | BIT(BTN_TL) | BIT(BTN_TR) |
+ BIT(BTN_START) | BIT(BTN_SELECT);
+ input_set_abs_params(input_dev, ABS_X, -64, 64, 0, 4);
+ input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 4);
serio_set_drvdata(serio, stinger);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(stinger);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&stinger->dev);
-
- printk(KERN_INFO "input: %s on %s\n", stinger_name, serio->phys);
-
+ input_register_device(stinger->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(stinger);
+ return err;
}
/*
diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c
index 7431efc..3a7d1bb 100644
--- a/drivers/input/joystick/tmdc.c
+++ b/drivers/input/joystick/tmdc.c
@@ -63,37 +63,70 @@
#define TMDC_ABS_HAT 4
#define TMDC_BTN 16
-static unsigned char tmdc_byte_a[16] = { 0, 1, 3, 4, 6, 7 };
-static unsigned char tmdc_byte_d[16] = { 2, 5, 8, 9 };
+static const unsigned char tmdc_byte_a[16] = { 0, 1, 3, 4, 6, 7 };
+static const unsigned char tmdc_byte_d[16] = { 2, 5, 8, 9 };
-static signed char tmdc_abs[TMDC_ABS] =
+static const signed char tmdc_abs[TMDC_ABS] =
{ ABS_X, ABS_Y, ABS_RUDDER, ABS_THROTTLE, ABS_RX, ABS_RY, ABS_RZ };
-static signed char tmdc_abs_hat[TMDC_ABS_HAT] =
+static const signed char tmdc_abs_hat[TMDC_ABS_HAT] =
{ ABS_HAT0X, ABS_HAT0Y, ABS_HAT1X, ABS_HAT1Y };
-static signed char tmdc_abs_at[TMDC_ABS] =
+static const signed char tmdc_abs_at[TMDC_ABS] =
{ ABS_X, ABS_Y, ABS_RUDDER, -1, ABS_THROTTLE };
-static signed char tmdc_abs_fm[TMDC_ABS] =
+static const signed char tmdc_abs_fm[TMDC_ABS] =
{ ABS_RX, ABS_RY, ABS_X, ABS_Y };
-static short tmdc_btn_pad[TMDC_BTN] =
+static const short tmdc_btn_pad[TMDC_BTN] =
{ BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z, BTN_START, BTN_SELECT, BTN_TL, BTN_TR };
-static short tmdc_btn_joy[TMDC_BTN] =
+static const short tmdc_btn_joy[TMDC_BTN] =
{ BTN_TRIGGER, BTN_THUMB, BTN_TOP, BTN_TOP2, BTN_BASE, BTN_BASE2, BTN_THUMB2, BTN_PINKIE,
BTN_BASE3, BTN_BASE4, BTN_A, BTN_B, BTN_C, BTN_X, BTN_Y, BTN_Z };
-static short tmdc_btn_fm[TMDC_BTN] =
+static const short tmdc_btn_fm[TMDC_BTN] =
{ BTN_TRIGGER, BTN_C, BTN_B, BTN_A, BTN_THUMB, BTN_X, BTN_Y, BTN_Z, BTN_TOP, BTN_TOP2 };
-static short tmdc_btn_at[TMDC_BTN] =
+static const short tmdc_btn_at[TMDC_BTN] =
{ BTN_TRIGGER, BTN_THUMB2, BTN_PINKIE, BTN_THUMB, BTN_BASE6, BTN_BASE5, BTN_BASE4,
BTN_BASE3, BTN_BASE2, BTN_BASE };
-static struct {
+static const struct {
int x;
int y;
} tmdc_hat_to_axis[] = {{ 0, 0}, { 1, 0}, { 0,-1}, {-1, 0}, { 0, 1}};
+static const struct tmdc_model {
+ unsigned char id;
+ const char *name;
+ char abs;
+ char hats;
+ char btnc[4];
+ char btno[4];
+ const signed char *axes;
+ const short *buttons;
+} tmdc_models[] = {
+ { 1, "ThrustMaster Millenium 3D Inceptor", 6, 2, { 4, 2 }, { 4, 6 }, tmdc_abs, tmdc_btn_joy },
+ { 3, "ThrustMaster Rage 3D Gamepad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad },
+ { 4, "ThrustMaster Attack Throttle", 5, 2, { 4, 6 }, { 4, 2 }, tmdc_abs_at, tmdc_btn_at },
+ { 8, "ThrustMaster FragMaster", 4, 0, { 8, 2 }, { 0, 0 }, tmdc_abs_fm, tmdc_btn_fm },
+ { 163, "Thrustmaster Fusion GamePad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad },
+ { 0, "Unknown %d-axis, %d-button TM device %d", 0, 0, { 0, 0 }, { 0, 0 }, tmdc_abs, tmdc_btn_joy }
+};
+
+
+struct tmdc_port {
+ struct input_dev *dev;
+ char name[64];
+ char phys[32];
+ int mode;
+ const signed char *abs;
+ const short *btn;
+ unsigned char absc;
+ unsigned char btnc[4];
+ unsigned char btno[4];
+};
+
struct tmdc {
struct gameport *gameport;
- struct input_dev dev[2];
+ struct tmdc_port *port[2];
+#if 0
+ struct input_dev *dev[2];
char name[2][64];
char phys[2][32];
int mode[2];
@@ -102,6 +135,7 @@
unsigned char absc[2];
unsigned char btnc[2][4];
unsigned char btno[2][4];
+#endif
int reads;
int bads;
unsigned char exists;
@@ -156,6 +190,50 @@
return (i[0] == TMDC_MAX_LENGTH) | ((i[1] == TMDC_MAX_LENGTH) << 1);
}
+static int tmdc_parse_packet(struct tmdc_port *port, unsigned char *data)
+{
+ int i, k, l;
+
+ if (data[TMDC_BYTE_ID] != port->mode)
+ return -1;
+
+ for (i = 0; i < port->absc; i++) {
+ if (port->abs[i] < 0)
+ return 0;
+
+ input_report_abs(port->dev, port->abs[i], data[tmdc_byte_a[i]]);
+ }
+
+ switch (port->mode) {
+
+ case TMDC_MODE_M3DI:
+
+ i = tmdc_byte_d[0];
+ input_report_abs(port->dev, ABS_HAT0X, ((data[i] >> 3) & 1) - ((data[i] >> 1) & 1));
+ input_report_abs(port->dev, ABS_HAT0Y, ((data[i] >> 2) & 1) - ( data[i] & 1));
+ break;
+
+ case TMDC_MODE_AT:
+
+ i = tmdc_byte_a[3];
+ input_report_abs(port->dev, ABS_HAT0X, tmdc_hat_to_axis[(data[i] - 141) / 25].x);
+ input_report_abs(port->dev, ABS_HAT0Y, tmdc_hat_to_axis[(data[i] - 141) / 25].y);
+ break;
+
+ }
+
+ for (k = l = 0; k < 4; k++) {
+ for (i = 0; i < port->btnc[k]; i++)
+ input_report_key(port->dev, port->btn[i + l],
+ ((data[tmdc_byte_d[k]] >> (i + port->btno[k])) & 1));
+ l += port->btnc[k];
+ }
+
+ input_sync(port->dev);
+
+ return 0;
+}
+
/*
* tmdc_poll() reads and analyzes ThrustMaster joystick data.
*/
@@ -164,57 +242,21 @@
{
unsigned char data[2][TMDC_MAX_LENGTH];
struct tmdc *tmdc = gameport_get_drvdata(gameport);
- struct input_dev *dev;
unsigned char r, bad = 0;
- int i, j, k, l;
+ int i;
tmdc->reads++;
if ((r = tmdc_read_packet(tmdc->gameport, data)) != tmdc->exists)
bad = 1;
- else
+ else {
+ for (i = 0; i < 2; i++) {
+ if (r & (1 << i) & tmdc->exists) {
- for (j = 0; j < 2; j++)
- if (r & (1 << j) & tmdc->exists) {
-
- if (data[j][TMDC_BYTE_ID] != tmdc->mode[j]) {
- bad = 1;
- continue;
+ if (tmdc_parse_packet(tmdc->port[i], data[i]))
+ bad = 1;
}
-
- dev = tmdc->dev + j;
-
- for (i = 0; i < tmdc->absc[j]; i++) {
- if (tmdc->abs[j][i] < 0) continue;
- input_report_abs(dev, tmdc->abs[j][i], data[j][tmdc_byte_a[i]]);
- }
-
- switch (tmdc->mode[j]) {
-
- case TMDC_MODE_M3DI:
-
- i = tmdc_byte_d[0];
- input_report_abs(dev, ABS_HAT0X, ((data[j][i] >> 3) & 1) - ((data[j][i] >> 1) & 1));
- input_report_abs(dev, ABS_HAT0Y, ((data[j][i] >> 2) & 1) - ( data[j][i] & 1));
- break;
-
- case TMDC_MODE_AT:
-
- i = tmdc_byte_a[3];
- input_report_abs(dev, ABS_HAT0X, tmdc_hat_to_axis[(data[j][i] - 141) / 25].x);
- input_report_abs(dev, ABS_HAT0Y, tmdc_hat_to_axis[(data[j][i] - 141) / 25].y);
- break;
-
- }
-
- for (k = l = 0; k < 4; k++) {
- for (i = 0; i < tmdc->btnc[j][k]; i++)
- input_report_key(dev, tmdc->btn[j][i + l],
- ((data[j][tmdc_byte_d[k]] >> (i + tmdc->btno[j][k])) & 1));
- l += tmdc->btnc[j][k];
- }
-
- input_sync(dev);
+ }
}
tmdc->bads += bad;
@@ -235,31 +277,89 @@
gameport_stop_polling(tmdc->gameport);
}
+static int tmdc_setup_port(struct tmdc *tmdc, int idx, unsigned char *data)
+{
+ const struct tmdc_model *model;
+ struct tmdc_port *port;
+ struct input_dev *input_dev;
+ int i, j, b = 0;
+
+ tmdc->port[idx] = port = kzalloc(sizeof (struct tmdc_port), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!port || !input_dev) {
+ kfree(port);
+ input_free_device(input_dev);
+ return -ENOMEM;
+ }
+
+ port->mode = data[TMDC_BYTE_ID];
+
+ for (model = tmdc_models; model->id && model->id != port->mode; model++)
+ /* empty */;
+
+ port->abs = model->axes;
+ port->btn = model->buttons;
+
+ if (!model->id) {
+ port->absc = data[TMDC_BYTE_DEF] >> 4;
+ for (i = 0; i < 4; i++)
+ port->btnc[i] = i < (data[TMDC_BYTE_DEF] & 0xf) ? 8 : 0;
+ } else {
+ port->absc = model->abs;
+ for (i = 0; i < 4; i++)
+ port->btnc[i] = model->btnc[i];
+ }
+
+ for (i = 0; i < 4; i++)
+ port->btno[i] = model->btno[i];
+
+ snprintf(port->name, sizeof(port->name), model->name,
+ port->absc, (data[TMDC_BYTE_DEF] & 0xf) << 3, port->mode);
+ snprintf(port->phys, sizeof(port->phys), "%s/input%d", tmdc->gameport->phys, i);
+
+ port->dev = input_dev;
+
+ input_dev->name = port->name;
+ input_dev->phys = port->phys;
+ input_dev->id.bustype = BUS_GAMEPORT;
+ input_dev->id.vendor = GAMEPORT_ID_VENDOR_THRUSTMASTER;
+ input_dev->id.product = model->id;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &tmdc->gameport->dev;
+ input_dev->private = tmdc;
+
+ input_dev->open = tmdc_open;
+ input_dev->close = tmdc_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (i = 0; i < port->absc && i < TMDC_ABS; i++)
+ if (port->abs[i] >= 0)
+ input_set_abs_params(input_dev, port->abs[i], 8, 248, 2, 4);
+
+ for (i = 0; i < model->hats && i < TMDC_ABS_HAT; i++)
+ input_set_abs_params(input_dev, tmdc_abs_hat[i], -1, 1, 0, 0);
+
+ for (i = 0; i < 4; i++) {
+ for (j = 0; j < port->btnc[i] && j < TMDC_BTN; j++)
+ set_bit(port->btn[j + b], input_dev->keybit);
+ b += port->btnc[i];
+ }
+
+ input_register_device(port->dev);
+
+ return 0;
+}
+
/*
* tmdc_probe() probes for ThrustMaster type joysticks.
*/
static int tmdc_connect(struct gameport *gameport, struct gameport_driver *drv)
{
- static struct models {
- unsigned char id;
- char *name;
- char abs;
- char hats;
- char btnc[4];
- char btno[4];
- signed char *axes;
- short *buttons;
- } models[] = { { 1, "ThrustMaster Millenium 3D Inceptor", 6, 2, { 4, 2 }, { 4, 6 }, tmdc_abs, tmdc_btn_joy },
- { 3, "ThrustMaster Rage 3D Gamepad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad },
- { 4, "ThrustMaster Attack Throttle", 5, 2, { 4, 6 }, { 4, 2 }, tmdc_abs_at, tmdc_btn_at },
- { 8, "ThrustMaster FragMaster", 4, 0, { 8, 2 }, { 0, 0 }, tmdc_abs_fm, tmdc_btn_fm },
- { 163, "Thrustmaster Fusion GamePad", 2, 0, { 8, 2 }, { 0, 0 }, tmdc_abs, tmdc_btn_pad },
- { 0, "Unknown %d-axis, %d-button TM device %d", 0, 0, { 0, 0 }, { 0, 0 }, tmdc_abs, tmdc_btn_joy }};
-
unsigned char data[2][TMDC_MAX_LENGTH];
struct tmdc *tmdc;
- int i, j, k, l, m;
+ int i;
int err;
if (!(tmdc = kzalloc(sizeof(struct tmdc), GFP_KERNEL)))
@@ -281,68 +381,25 @@
gameport_set_poll_handler(gameport, tmdc_poll);
gameport_set_poll_interval(gameport, 20);
- for (j = 0; j < 2; j++)
- if (tmdc->exists & (1 << j)) {
+ for (i = 0; i < 2; i++) {
+ if (tmdc->exists & (1 << i)) {
- tmdc->mode[j] = data[j][TMDC_BYTE_ID];
-
- for (m = 0; models[m].id && models[m].id != tmdc->mode[j]; m++);
-
- tmdc->abs[j] = models[m].axes;
- tmdc->btn[j] = models[m].buttons;
-
- if (!models[m].id) {
- models[m].abs = data[j][TMDC_BYTE_DEF] >> 4;
- for (k = 0; k < 4; k++)
- models[m].btnc[k] = k < (data[j][TMDC_BYTE_DEF] & 0xf) ? 8 : 0;
- }
-
- tmdc->absc[j] = models[m].abs;
- for (k = 0; k < 4; k++) {
- tmdc->btnc[j][k] = models[m].btnc[k];
- tmdc->btno[j][k] = models[m].btno[k];
- }
-
- sprintf(tmdc->name[j], models[m].name, models[m].abs,
- (data[j][TMDC_BYTE_DEF] & 0xf) << 3, tmdc->mode[j]);
-
- sprintf(tmdc->phys[j], "%s/input%d", gameport->phys, j);
-
- tmdc->dev[j].private = tmdc;
- tmdc->dev[j].open = tmdc_open;
- tmdc->dev[j].close = tmdc_close;
-
- tmdc->dev[j].name = tmdc->name[j];
- tmdc->dev[j].phys = tmdc->phys[j];
- tmdc->dev[j].id.bustype = BUS_GAMEPORT;
- tmdc->dev[j].id.vendor = GAMEPORT_ID_VENDOR_THRUSTMASTER;
- tmdc->dev[j].id.product = models[m].id;
- tmdc->dev[j].id.version = 0x0100;
-
- tmdc->dev[j].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (i = 0; i < models[m].abs && i < TMDC_ABS; i++)
- if (tmdc->abs[j][i] >= 0)
- input_set_abs_params(&tmdc->dev[j], tmdc->abs[j][i], 8, 248, 2, 4);
-
- for (i = 0; i < models[m].hats && i < TMDC_ABS_HAT; i++)
- input_set_abs_params(&tmdc->dev[j], tmdc_abs_hat[i], -1, 1, 0, 0);
-
-
- for (k = l = 0; k < 4; k++) {
- for (i = 0; i < models[m].btnc[k] && i < TMDC_BTN; i++)
- set_bit(tmdc->btn[j][i + l], tmdc->dev[j].keybit);
- l += models[m].btnc[k];
- }
-
- input_register_device(tmdc->dev + j);
- printk(KERN_INFO "input: %s on %s\n", tmdc->name[j], gameport->phys);
+ err = tmdc_setup_port(tmdc, i, data[i]);
+ if (err)
+ goto fail3;
}
+ }
return 0;
-fail2: gameport_close(gameport);
-fail1: gameport_set_drvdata(gameport, NULL);
+ fail3: while (--i >= 0) {
+ if (tmdc->port[i]) {
+ input_unregister_device(tmdc->port[i]->dev);
+ kfree(tmdc->port[i]);
+ }
+ }
+ fail2: gameport_close(gameport);
+ fail1: gameport_set_drvdata(gameport, NULL);
kfree(tmdc);
return err;
}
@@ -352,9 +409,12 @@
struct tmdc *tmdc = gameport_get_drvdata(gameport);
int i;
- for (i = 0; i < 2; i++)
- if (tmdc->exists & (1 << i))
- input_unregister_device(tmdc->dev + i);
+ for (i = 0; i < 2; i++) {
+ if (tmdc->port[i]) {
+ input_unregister_device(tmdc->port[i]->dev);
+ kfree(tmdc->port[i]);
+ }
+ }
gameport_close(gameport);
gameport_set_drvdata(gameport, NULL);
kfree(tmdc);
diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
index 0c5b9c8..7e97649 100644
--- a/drivers/input/joystick/turbografx.c
+++ b/drivers/input/joystick/turbografx.c
@@ -42,19 +42,21 @@
MODULE_DESCRIPTION("TurboGraFX parallel port interface driver");
MODULE_LICENSE("GPL");
-static int tgfx[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 };
-static int tgfx_nargs __initdata = 0;
-module_param_array_named(map, tgfx, int, &tgfx_nargs, 0);
+#define TGFX_MAX_PORTS 3
+#define TGFX_MAX_DEVICES 7
+
+struct tgfx_config {
+ int args[TGFX_MAX_DEVICES + 1];
+ int nargs;
+};
+
+static struct tgfx_config tgfx[TGFX_MAX_PORTS] __initdata;
+
+module_param_array_named(map, tgfx[0].args, int, &tgfx[0].nargs, 0);
MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<js1>,<js2>,..<js7>");
-
-static int tgfx_2[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 };
-static int tgfx_nargs_2 __initdata = 0;
-module_param_array_named(map2, tgfx_2, int, &tgfx_nargs_2, 0);
+module_param_array_named(map2, tgfx[1].args, int, &tgfx[1].nargs, 0);
MODULE_PARM_DESC(map2, "Describes second set of devices");
-
-static int tgfx_3[] __initdata = { -1, 0, 0, 0, 0, 0, 0, 0 };
-static int tgfx_nargs_3 __initdata = 0;
-module_param_array_named(map3, tgfx_3, int, &tgfx_nargs_3, 0);
+module_param_array_named(map3, tgfx[2].args, int, &tgfx[2].nargs, 0);
MODULE_PARM_DESC(map3, "Describes third set of devices");
__obsolete_setup("tgfx=");
@@ -75,17 +77,17 @@
#define TGFX_TOP2 0x08
static int tgfx_buttons[] = { BTN_TRIGGER, BTN_THUMB, BTN_THUMB2, BTN_TOP, BTN_TOP2 };
-static char *tgfx_name = "TurboGraFX Multisystem joystick";
static struct tgfx {
struct pardevice *pd;
struct timer_list timer;
- struct input_dev dev[7];
- char phys[7][32];
+ struct input_dev *dev[TGFX_MAX_DEVICES];
+ char name[TGFX_MAX_DEVICES][64];
+ char phys[TGFX_MAX_DEVICES][32];
int sticks;
int used;
struct semaphore sem;
-} *tgfx_base[3];
+} *tgfx_base[TGFX_MAX_PORTS];
/*
* tgfx_timer() reads and analyzes TurboGraFX joystick data.
@@ -100,7 +102,7 @@
for (i = 0; i < 7; i++)
if (tgfx->sticks & (1 << i)) {
- dev = tgfx->dev + i;
+ dev = tgfx->dev[i];
parport_write_data(tgfx->pd->port, ~(1 << i));
data1 = parport_read_status(tgfx->pd->port) ^ 0x7f;
@@ -153,118 +155,165 @@
up(&tgfx->sem);
}
+
+
/*
* tgfx_probe() probes for tg gamepads.
*/
-static struct tgfx __init *tgfx_probe(int *config, int nargs)
+static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs)
{
struct tgfx *tgfx;
+ struct input_dev *input_dev;
struct parport *pp;
+ struct pardevice *pd;
int i, j;
+ int err;
- if (config[0] < 0)
- return NULL;
-
- if (nargs < 2) {
- printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n");
- return NULL;
- }
-
- pp = parport_find_number(config[0]);
-
+ pp = parport_find_number(parport);
if (!pp) {
printk(KERN_ERR "turbografx.c: no such parport\n");
- return NULL;
+ err = -EINVAL;
+ goto err_out;
}
- if (!(tgfx = kzalloc(sizeof(struct tgfx), GFP_KERNEL))) {
- parport_put_port(pp);
- return NULL;
+ pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
+ if (!pd) {
+ printk(KERN_ERR "turbografx.c: parport busy already - lp.o loaded?\n");
+ err = -EBUSY;
+ goto err_put_pp;
+ }
+
+ tgfx = kzalloc(sizeof(struct tgfx), GFP_KERNEL);
+ if (!tgfx) {
+ printk(KERN_ERR "turbografx.c: Not enough memory\n");
+ err = -ENOMEM;
+ goto err_unreg_pardev;
}
init_MUTEX(&tgfx->sem);
-
- tgfx->pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
-
- parport_put_port(pp);
-
- if (!tgfx->pd) {
- printk(KERN_ERR "turbografx.c: parport busy already - lp.o loaded?\n");
- kfree(tgfx);
- return NULL;
- }
-
+ tgfx->pd = pd;
init_timer(&tgfx->timer);
tgfx->timer.data = (long) tgfx;
tgfx->timer.function = tgfx_timer;
- tgfx->sticks = 0;
+ for (i = 0; i < n_devs; i++) {
+ if (n_buttons[i] < 1)
+ continue;
- for (i = 0; i < nargs - 1; i++)
- if (config[i+1] > 0 && config[i+1] < 6) {
-
- tgfx->sticks |= (1 << i);
-
- tgfx->dev[i].private = tgfx;
- tgfx->dev[i].open = tgfx_open;
- tgfx->dev[i].close = tgfx_close;
-
- sprintf(tgfx->phys[i], "%s/input0", tgfx->pd->port->name);
-
- tgfx->dev[i].name = tgfx_name;
- tgfx->dev[i].phys = tgfx->phys[i];
- tgfx->dev[i].id.bustype = BUS_PARPORT;
- tgfx->dev[i].id.vendor = 0x0003;
- tgfx->dev[i].id.product = config[i+1];
- tgfx->dev[i].id.version = 0x0100;
-
- tgfx->dev[i].evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- tgfx->dev[i].absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
-
- for (j = 0; j < config[i+1]; j++)
- set_bit(tgfx_buttons[j], tgfx->dev[i].keybit);
-
- tgfx->dev[i].absmin[ABS_X] = -1; tgfx->dev[i].absmax[ABS_X] = 1;
- tgfx->dev[i].absmin[ABS_Y] = -1; tgfx->dev[i].absmax[ABS_Y] = 1;
-
- input_register_device(tgfx->dev + i);
- printk(KERN_INFO "input: %d-button Multisystem joystick on %s\n",
- config[i+1], tgfx->pd->port->name);
+ if (n_buttons[i] > 6) {
+ printk(KERN_ERR "turbografx.c: Invalid number of buttons %d\n", n_buttons[i]);
+ err = -EINVAL;
+ goto err_free_devs;
}
+ tgfx->dev[i] = input_dev = input_allocate_device();
+ if (!input_dev) {
+ printk(KERN_ERR "turbografx.c: Not enough memory for input device\n");
+ err = -ENOMEM;
+ goto err_free_devs;
+ }
+
+ tgfx->sticks |= (1 << i);
+ snprintf(tgfx->name[i], sizeof(tgfx->name[i]),
+ "TurboGraFX %d-button Multisystem joystick", n_buttons[i]);
+ snprintf(tgfx->phys[i], sizeof(tgfx->phys[i]),
+ "%s/input%d", tgfx->pd->port->name, i);
+
+ input_dev->name = tgfx->name[i];
+ input_dev->phys = tgfx->phys[i];
+ input_dev->id.bustype = BUS_PARPORT;
+ input_dev->id.vendor = 0x0003;
+ input_dev->id.product = n_buttons[i];
+ input_dev->id.version = 0x0100;
+
+ input_dev->private = tgfx;
+ input_dev->open = tgfx_open;
+ input_dev->close = tgfx_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_set_abs_params(input_dev, ABS_X, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, -1, 1, 0, 0);
+
+ for (j = 0; j < n_buttons[i]; j++)
+ set_bit(tgfx_buttons[j], input_dev->keybit);
+
+ input_register_device(tgfx->dev[i]);
+ }
+
if (!tgfx->sticks) {
- parport_unregister_device(tgfx->pd);
- kfree(tgfx);
- return NULL;
+ printk(KERN_ERR "turbografx.c: No valid devices specified\n");
+ err = -EINVAL;
+ goto err_free_tgfx;
}
return tgfx;
+
+ err_free_devs:
+ while (--i >= 0)
+ input_unregister_device(tgfx->dev[i]);
+ err_free_tgfx:
+ kfree(tgfx);
+ err_unreg_pardev:
+ parport_unregister_device(pd);
+ err_put_pp:
+ parport_put_port(pp);
+ err_out:
+ return ERR_PTR(err);
+}
+
+static void __exit tgfx_remove(struct tgfx *tgfx)
+{
+ int i;
+
+ for (i = 0; i < TGFX_MAX_DEVICES; i++)
+ if (tgfx->dev[i])
+ input_unregister_device(tgfx->dev[i]);
+ parport_unregister_device(tgfx->pd);
+ kfree(tgfx);
}
static int __init tgfx_init(void)
{
- tgfx_base[0] = tgfx_probe(tgfx, tgfx_nargs);
- tgfx_base[1] = tgfx_probe(tgfx_2, tgfx_nargs_2);
- tgfx_base[2] = tgfx_probe(tgfx_3, tgfx_nargs_3);
+ int i;
+ int have_dev = 0;
+ int err = 0;
- if (tgfx_base[0] || tgfx_base[1] || tgfx_base[2])
- return 0;
+ for (i = 0; i < TGFX_MAX_PORTS; i++) {
+ if (tgfx[i].nargs == 0 || tgfx[i].args[0] < 0)
+ continue;
- return -ENODEV;
+ if (tgfx[i].nargs < 2) {
+ printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n");
+ err = -EINVAL;
+ break;
+ }
+
+ tgfx_base[i] = tgfx_probe(tgfx[i].args[0], tgfx[i].args + 1, tgfx[i].nargs - 1);
+ if (IS_ERR(tgfx_base[i])) {
+ err = PTR_ERR(tgfx_base[i]);
+ break;
+ }
+
+ have_dev = 1;
+ }
+
+ if (err) {
+ while (--i >= 0)
+ tgfx_remove(tgfx_base[i]);
+ return err;
+ }
+
+ return have_dev ? 0 : -ENODEV;
}
static void __exit tgfx_exit(void)
{
- int i, j;
+ int i;
- for (i = 0; i < 3; i++)
- if (tgfx_base[i]) {
- for (j = 0; j < 7; j++)
- if (tgfx_base[i]->sticks & (1 << j))
- input_unregister_device(tgfx_base[i]->dev + j);
- parport_unregister_device(tgfx_base[i]->pd);
- }
+ for (i = 0; i < TGFX_MAX_PORTS; i++)
+ if (tgfx_base[i])
+ tgfx_remove(tgfx_base[i]);
}
module_init(tgfx_init);
diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c
index 0379bc1..cd3a1e7 100644
--- a/drivers/input/joystick/twidjoy.c
+++ b/drivers/input/joystick/twidjoy.c
@@ -69,8 +69,6 @@
#define TWIDJOY_MAX_LENGTH 5
-static char *twidjoy_name = "Handykey Twiddler";
-
static struct twidjoy_button_spec {
int bitshift;
int bitmask;
@@ -95,7 +93,7 @@
*/
struct twidjoy {
- struct input_dev dev;
+ struct input_dev *dev;
int idx;
unsigned char data[TWIDJOY_MAX_LENGTH];
char phys[32];
@@ -108,37 +106,33 @@
static void twidjoy_process_packet(struct twidjoy *twidjoy, struct pt_regs *regs)
{
- if (twidjoy->idx == TWIDJOY_MAX_LENGTH) {
- struct input_dev *dev = &twidjoy->dev;
- unsigned char *data = twidjoy->data;
- struct twidjoy_button_spec *bp;
- int button_bits, abs_x, abs_y;
+ struct input_dev *dev = twidjoy->dev;
+ unsigned char *data = twidjoy->data;
+ struct twidjoy_button_spec *bp;
+ int button_bits, abs_x, abs_y;
- button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f);
+ button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f);
- input_regs(dev, regs);
+ input_regs(dev, regs);
- for (bp = twidjoy_buttons; bp->bitmask; bp++) {
- int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift;
- int i;
+ for (bp = twidjoy_buttons; bp->bitmask; bp++) {
+ int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift;
+ int i;
- for (i = 0; i < bp->bitmask; i++)
- input_report_key(dev, bp->buttons[i], i+1 == value);
- }
-
- abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2);
- if (data[4] & 0x08) abs_x -= 256;
-
- abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0);
- if (data[3] & 0x02) abs_y -= 256;
-
- input_report_abs(dev, ABS_X, -abs_x);
- input_report_abs(dev, ABS_Y, +abs_y);
-
- input_sync(dev);
+ for (i = 0; i < bp->bitmask; i++)
+ input_report_key(dev, bp->buttons[i], i+1 == value);
}
- return;
+ abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2);
+ if (data[4] & 0x08) abs_x -= 256;
+
+ abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0);
+ if (data[3] & 0x02) abs_y -= 256;
+
+ input_report_abs(dev, ABS_X, -abs_x);
+ input_report_abs(dev, ABS_Y, +abs_y);
+
+ input_sync(dev);
}
/*
@@ -179,9 +173,9 @@
{
struct twidjoy *twidjoy = serio_get_drvdata(serio);
- input_unregister_device(&twidjoy->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(twidjoy->dev);
kfree(twidjoy);
}
@@ -195,59 +189,49 @@
{
struct twidjoy_button_spec *bp;
struct twidjoy *twidjoy;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
int i;
- int err;
- if (!(twidjoy = kmalloc(sizeof(struct twidjoy), GFP_KERNEL)))
- return -ENOMEM;
+ twidjoy = kzalloc(sizeof(struct twidjoy), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!twidjoy || !input_dev)
+ goto fail;
- memset(twidjoy, 0, sizeof(struct twidjoy));
-
+ twidjoy->dev = input_dev;
sprintf(twidjoy->phys, "%s/input0", serio->phys);
- init_input_dev(&twidjoy->dev);
- twidjoy->dev.name = twidjoy_name;
- twidjoy->dev.phys = twidjoy->phys;
- twidjoy->dev.id.bustype = BUS_RS232;
- twidjoy->dev.id.vendor = SERIO_TWIDJOY;
- twidjoy->dev.id.product = 0x0001;
- twidjoy->dev.id.version = 0x0100;
- twidjoy->dev.dev = &serio->dev;
+ input_dev->name = "Handykey Twiddler";
+ input_dev->phys = twidjoy->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_TWIDJOY;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = twidjoy;
- twidjoy->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+ input_set_abs_params(input_dev, ABS_X, -50, 50, 4, 4);
+ input_set_abs_params(input_dev, ABS_Y, -50, 50, 4, 4);
- for (bp = twidjoy_buttons; bp->bitmask; bp++) {
+ for (bp = twidjoy_buttons; bp->bitmask; bp++)
for (i = 0; i < bp->bitmask; i++)
- set_bit(bp->buttons[i], twidjoy->dev.keybit);
- }
-
- twidjoy->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
-
- for (i = 0; i < 2; i++) {
- twidjoy->dev.absmax[ABS_X+i] = 50;
- twidjoy->dev.absmin[ABS_X+i] = -50;
-
- /* TODO: arndt 20010708: Are these values appropriate? */
- twidjoy->dev.absfuzz[ABS_X+i] = 4;
- twidjoy->dev.absflat[ABS_X+i] = 4;
- }
-
- twidjoy->dev.private = twidjoy;
+ set_bit(bp->buttons[i], input_dev->keybit);
serio_set_drvdata(serio, twidjoy);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(twidjoy);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&twidjoy->dev);
-
- printk(KERN_INFO "input: %s on %s\n", twidjoy_name, serio->phys);
-
+ input_register_device(twidjoy->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(twidjoy);
+ return err;
}
/*
diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c
index 6976a21..99a642d 100644
--- a/drivers/input/joystick/warrior.c
+++ b/drivers/input/joystick/warrior.c
@@ -47,14 +47,13 @@
#define WARRIOR_MAX_LENGTH 16
static char warrior_lengths[] = { 0, 4, 12, 3, 4, 4, 0, 0 };
-static char *warrior_name = "Logitech WingMan Warrior";
/*
* Per-Warrior data.
*/
struct warrior {
- struct input_dev dev;
+ struct input_dev *dev;
int idx, len;
unsigned char data[WARRIOR_MAX_LENGTH];
char phys[32];
@@ -67,7 +66,7 @@
static void warrior_process_packet(struct warrior *warrior, struct pt_regs *regs)
{
- struct input_dev *dev = &warrior->dev;
+ struct input_dev *dev = warrior->dev;
unsigned char *data = warrior->data;
if (!warrior->idx) return;
@@ -131,9 +130,9 @@
{
struct warrior *warrior = serio_get_drvdata(serio);
- input_unregister_device(&warrior->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(warrior->dev);
kfree(warrior);
}
@@ -146,60 +145,48 @@
static int warrior_connect(struct serio *serio, struct serio_driver *drv)
{
struct warrior *warrior;
- int i;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
- if (!(warrior = kmalloc(sizeof(struct warrior), GFP_KERNEL)))
- return -ENOMEM;
+ warrior = kzalloc(sizeof(struct warrior), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!warrior || !input_dev)
+ goto fail;
- memset(warrior, 0, sizeof(struct warrior));
-
- warrior->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS);
- warrior->dev.keybit[LONG(BTN_TRIGGER)] = BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP) | BIT(BTN_TOP2);
- warrior->dev.relbit[0] = BIT(REL_DIAL);
- warrior->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_THROTTLE) | BIT(ABS_HAT0X) | BIT(ABS_HAT0Y);
-
+ warrior->dev = input_dev;
sprintf(warrior->phys, "%s/input0", serio->phys);
- init_input_dev(&warrior->dev);
- warrior->dev.name = warrior_name;
- warrior->dev.phys = warrior->phys;
- warrior->dev.id.bustype = BUS_RS232;
- warrior->dev.id.vendor = SERIO_WARRIOR;
- warrior->dev.id.product = 0x0001;
- warrior->dev.id.version = 0x0100;
- warrior->dev.dev = &serio->dev;
+ input_dev->name = "Logitech WingMan Warrior";
+ input_dev->phys = warrior->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_WARRIOR;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = warrior;
- for (i = 0; i < 2; i++) {
- warrior->dev.absmax[ABS_X+i] = -64;
- warrior->dev.absmin[ABS_X+i] = 64;
- warrior->dev.absflat[ABS_X+i] = 8;
- }
-
- warrior->dev.absmax[ABS_THROTTLE] = -112;
- warrior->dev.absmin[ABS_THROTTLE] = 112;
-
- for (i = 0; i < 2; i++) {
- warrior->dev.absmax[ABS_HAT0X+i] = -1;
- warrior->dev.absmin[ABS_HAT0X+i] = 1;
- }
-
- warrior->dev.private = warrior;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TRIGGER)] = BIT(BTN_TRIGGER) | BIT(BTN_THUMB) | BIT(BTN_TOP) | BIT(BTN_TOP2);
+ input_dev->relbit[0] = BIT(REL_DIAL);
+ input_set_abs_params(input_dev, ABS_X, -64, 64, 0, 8);
+ input_set_abs_params(input_dev, ABS_Y, -64, 64, 0, 8);
+ input_set_abs_params(input_dev, ABS_THROTTLE, -112, 112, 0, 0);
+ input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0);
+ input_set_abs_params(input_dev, ABS_HAT0X, -1, 1, 0, 0);
serio_set_drvdata(serio, warrior);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(warrior);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&warrior->dev);
-
- printk(KERN_INFO "input: Logitech WingMan Warrior on %s\n", serio->phys);
-
+ input_register_device(warrior->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(warrior);
+ return err;
}
/*
diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
index 4e8e8ea..3d63bc1 100644
--- a/drivers/input/keyboard/amikbd.c
+++ b/drivers/input/keyboard/amikbd.c
@@ -155,10 +155,7 @@
[7] = KERN_WARNING "amikbd: keyboard interrupt\n"
};
-static struct input_dev amikbd_dev;
-
-static char *amikbd_name = "Amiga keyboard";
-static char *amikbd_phys = "amikbd/input0";
+static struct input_dev *amikbd_dev;
static irqreturn_t amikbd_interrupt(int irq, void *dummy, struct pt_regs *fp)
{
@@ -176,16 +173,16 @@
scancode = amikbd_keycode[scancode];
- input_regs(&amikbd_dev, fp);
+ input_regs(amikbd_dev, fp);
if (scancode == KEY_CAPSLOCK) { /* CapsLock is a toggle switch key on Amiga */
- input_report_key(&amikbd_dev, scancode, 1);
- input_report_key(&amikbd_dev, scancode, 0);
- input_sync(&amikbd_dev);
+ input_report_key(amikbd_dev, scancode, 1);
+ input_report_key(amikbd_dev, scancode, 0);
} else {
- input_report_key(&amikbd_dev, scancode, down);
- input_sync(&amikbd_dev);
+ input_report_key(amikbd_dev, scancode, down);
}
+
+ input_sync(amikbd_dev);
} else /* scancodes >= 0x78 are error codes */
printk(amikbd_messages[scancode - 0x78]);
@@ -202,39 +199,41 @@
if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb"))
return -EBUSY;
- init_input_dev(&amikbd_dev);
+ amikbd_dev = input_dev_allocate();
+ if (!amikbd_dev) {
+ printk(KERN_ERR "amikbd: not enough memory for input device\n");
+ release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
+ return -ENOMEM;
+ }
- amikbd_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- amikbd_dev.keycode = amikbd_keycode;
- amikbd_dev.keycodesize = sizeof(unsigned char);
- amikbd_dev.keycodemax = ARRAY_SIZE(amikbd_keycode);
+ amikbd_dev->name = "Amiga Keyboard";
+ amikbd_dev->phys = "amikbd/input0";
+ amikbd_dev->id.bustype = BUS_AMIGA;
+ amikbd_dev->id.vendor = 0x0001;
+ amikbd_dev->id.product = 0x0001;
+ amikbd_dev->id.version = 0x0100;
+
+ amikbd_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ amikbd_dev->keycode = amikbd_keycode;
+ amikbd_dev->keycodesize = sizeof(unsigned char);
+ amikbd_dev->keycodemax = ARRAY_SIZE(amikbd_keycode);
for (i = 0; i < 0x78; i++)
if (amikbd_keycode[i])
- set_bit(amikbd_keycode[i], amikbd_dev.keybit);
+ set_bit(amikbd_keycode[i], amikbd_dev->keybit);
ciaa.cra &= ~0x41; /* serial data in, turn off TA */
request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd", amikbd_interrupt);
- amikbd_dev.name = amikbd_name;
- amikbd_dev.phys = amikbd_phys;
- amikbd_dev.id.bustype = BUS_AMIGA;
- amikbd_dev.id.vendor = 0x0001;
- amikbd_dev.id.product = 0x0001;
- amikbd_dev.id.version = 0x0100;
-
- input_register_device(&amikbd_dev);
-
- printk(KERN_INFO "input: %s\n", amikbd_name);
-
+ input_register_device(amikbd_dev);
return 0;
}
static void __exit amikbd_exit(void)
{
- input_unregister_device(&amikbd_dev);
free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
- release_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100);
+ input_unregister_device(amikbd_dev);
+ release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
}
module_init(amikbd_init);
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 1ad8c2ee..820c7fd 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -185,12 +185,12 @@
struct atkbd {
- struct ps2dev ps2dev;
+ struct ps2dev ps2dev;
+ struct input_dev *dev;
/* Written only during init */
char name[64];
char phys[32];
- struct input_dev dev;
unsigned short id;
unsigned char keycode[512];
@@ -290,7 +290,7 @@
if (!atkbd->enabled)
goto out;
- input_event(&atkbd->dev, EV_MSC, MSC_RAW, code);
+ input_event(atkbd->dev, EV_MSC, MSC_RAW, code);
if (atkbd->translated) {
@@ -326,10 +326,10 @@
atkbd->release = 1;
goto out;
case ATKBD_RET_HANGUEL:
- atkbd_report_key(&atkbd->dev, regs, KEY_HANGUEL, 3);
+ atkbd_report_key(atkbd->dev, regs, KEY_HANGUEL, 3);
goto out;
case ATKBD_RET_HANJA:
- atkbd_report_key(&atkbd->dev, regs, KEY_HANJA, 3);
+ atkbd_report_key(atkbd->dev, regs, KEY_HANJA, 3);
goto out;
case ATKBD_RET_ERR:
printk(KERN_DEBUG "atkbd.c: Keyboard on %s reports too many keys pressed.\n", serio->phys);
@@ -345,7 +345,7 @@
}
if (atkbd->keycode[code] != ATKBD_KEY_NULL)
- input_event(&atkbd->dev, EV_MSC, MSC_SCAN, code);
+ input_event(atkbd->dev, EV_MSC, MSC_SCAN, code);
switch (atkbd->keycode[code]) {
case ATKBD_KEY_NULL:
@@ -365,7 +365,7 @@
"to make it known.\n",
code & 0x80 ? "e0" : "", code & 0x7f);
}
- input_sync(&atkbd->dev);
+ input_sync(atkbd->dev);
break;
case ATKBD_SCR_1:
scroll = 1 - atkbd->release * 2;
@@ -390,7 +390,7 @@
break;
default:
value = atkbd->release ? 0 :
- (1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev.key)));
+ (1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev->key)));
switch (value) { /* Workaround Toshiba laptop multiple keypress */
case 0:
@@ -398,7 +398,7 @@
break;
case 1:
atkbd->last = code;
- atkbd->time = jiffies + msecs_to_jiffies(atkbd->dev.rep[REP_DELAY]) / 2;
+ atkbd->time = jiffies + msecs_to_jiffies(atkbd->dev->rep[REP_DELAY]) / 2;
break;
case 2:
if (!time_after(jiffies, atkbd->time) && atkbd->last == code)
@@ -406,16 +406,16 @@
break;
}
- atkbd_report_key(&atkbd->dev, regs, atkbd->keycode[code], value);
+ atkbd_report_key(atkbd->dev, regs, atkbd->keycode[code], value);
}
if (atkbd->scroll) {
- input_regs(&atkbd->dev, regs);
+ input_regs(atkbd->dev, regs);
if (click != -1)
- input_report_key(&atkbd->dev, BTN_MIDDLE, click);
- input_report_rel(&atkbd->dev, REL_WHEEL, scroll);
- input_report_rel(&atkbd->dev, REL_HWHEEL, hscroll);
- input_sync(&atkbd->dev);
+ input_report_key(atkbd->dev, BTN_MIDDLE, click);
+ input_report_rel(atkbd->dev, REL_WHEEL, scroll);
+ input_report_rel(atkbd->dev, REL_HWHEEL, hscroll);
+ input_sync(atkbd->dev);
}
atkbd->release = 0;
@@ -463,7 +463,6 @@
return 0;
-
case EV_REP:
if (atkbd->softrepeat) return 0;
@@ -693,7 +692,7 @@
device_remove_file(&serio->dev, &atkbd_attr_softrepeat);
device_remove_file(&serio->dev, &atkbd_attr_softraw);
- input_unregister_device(&atkbd->dev);
+ input_unregister_device(atkbd->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(atkbd);
@@ -701,7 +700,7 @@
/*
- * atkbd_set_device_attrs() initializes keyboard's keycode table
+ * atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
*/
@@ -737,53 +736,58 @@
static void atkbd_set_device_attrs(struct atkbd *atkbd)
{
+ struct input_dev *input_dev = atkbd->dev;
int i;
- memset(&atkbd->dev, 0, sizeof(struct input_dev));
+ if (atkbd->extra)
+ sprintf(atkbd->name, "AT Set 2 Extra keyboard");
+ else
+ sprintf(atkbd->name, "AT %s Set %d keyboard",
+ atkbd->translated ? "Translated" : "Raw", atkbd->set);
- init_input_dev(&atkbd->dev);
+ sprintf(atkbd->phys, "%s/input0", atkbd->ps2dev.serio->phys);
- atkbd->dev.name = atkbd->name;
- atkbd->dev.phys = atkbd->phys;
- atkbd->dev.id.bustype = BUS_I8042;
- atkbd->dev.id.vendor = 0x0001;
- atkbd->dev.id.product = atkbd->translated ? 1 : atkbd->set;
- atkbd->dev.id.version = atkbd->id;
- atkbd->dev.event = atkbd_event;
- atkbd->dev.private = atkbd;
- atkbd->dev.dev = &atkbd->ps2dev.serio->dev;
+ input_dev->name = atkbd->name;
+ input_dev->phys = atkbd->phys;
+ input_dev->id.bustype = BUS_I8042;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = atkbd->translated ? 1 : atkbd->set;
+ input_dev->id.version = atkbd->id;
+ input_dev->event = atkbd_event;
+ input_dev->private = atkbd;
+ input_dev->cdev.dev = &atkbd->ps2dev.serio->dev;
- atkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_MSC);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_MSC);
if (atkbd->write) {
- atkbd->dev.evbit[0] |= BIT(EV_LED);
- atkbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
+ input_dev->evbit[0] |= BIT(EV_LED);
+ input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
}
if (atkbd->extra)
- atkbd->dev.ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) |
+ input_dev->ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) |
BIT(LED_SLEEP) | BIT(LED_MUTE) | BIT(LED_MISC);
if (!atkbd->softrepeat) {
- atkbd->dev.rep[REP_DELAY] = 250;
- atkbd->dev.rep[REP_PERIOD] = 33;
+ input_dev->rep[REP_DELAY] = 250;
+ input_dev->rep[REP_PERIOD] = 33;
}
- atkbd->dev.mscbit[0] = atkbd->softraw ? BIT(MSC_SCAN) : BIT(MSC_RAW) | BIT(MSC_SCAN);
+ input_dev->mscbit[0] = atkbd->softraw ? BIT(MSC_SCAN) : BIT(MSC_RAW) | BIT(MSC_SCAN);
if (atkbd->scroll) {
- atkbd->dev.evbit[0] |= BIT(EV_REL);
- atkbd->dev.relbit[0] = BIT(REL_WHEEL) | BIT(REL_HWHEEL);
- set_bit(BTN_MIDDLE, atkbd->dev.keybit);
+ input_dev->evbit[0] |= BIT(EV_REL);
+ input_dev->relbit[0] = BIT(REL_WHEEL) | BIT(REL_HWHEEL);
+ set_bit(BTN_MIDDLE, input_dev->keybit);
}
- atkbd->dev.keycode = atkbd->keycode;
- atkbd->dev.keycodesize = sizeof(unsigned char);
- atkbd->dev.keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
+ input_dev->keycode = atkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
for (i = 0; i < 512; i++)
if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
- set_bit(atkbd->keycode[i], atkbd->dev.keybit);
+ set_bit(atkbd->keycode[i], input_dev->keybit);
}
/*
@@ -796,13 +800,15 @@
static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct atkbd *atkbd;
- int err;
+ struct input_dev *dev;
+ int err = -ENOMEM;
- if (!(atkbd = kmalloc(sizeof(struct atkbd), GFP_KERNEL)))
- return - ENOMEM;
+ atkbd = kzalloc(sizeof(struct atkbd), GFP_KERNEL);
+ dev = input_allocate_device();
+ if (!atkbd || !dev)
+ goto fail;
- memset(atkbd, 0, sizeof(struct atkbd));
-
+ atkbd->dev = dev;
ps2_init(&atkbd->ps2dev, serio);
switch (serio->id.type) {
@@ -828,19 +834,15 @@
serio_set_drvdata(serio, atkbd);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(atkbd);
- return err;
- }
+ if (err)
+ goto fail;
if (atkbd->write) {
if (atkbd_probe(atkbd)) {
serio_close(serio);
- serio_set_drvdata(serio, NULL);
- kfree(atkbd);
- return -ENODEV;
+ err = -ENODEV;
+ goto fail;
}
atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
@@ -851,19 +853,9 @@
atkbd->id = 0xab00;
}
- if (atkbd->extra)
- sprintf(atkbd->name, "AT Set 2 Extra keyboard");
- else
- sprintf(atkbd->name, "AT %s Set %d keyboard",
- atkbd->translated ? "Translated" : "Raw", atkbd->set);
-
- sprintf(atkbd->phys, "%s/input0", serio->phys);
-
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
-
device_create_file(&serio->dev, &atkbd_attr_extra);
device_create_file(&serio->dev, &atkbd_attr_scroll);
device_create_file(&serio->dev, &atkbd_attr_set);
@@ -872,9 +864,14 @@
atkbd_enable(atkbd);
- printk(KERN_INFO "input: %s on %s\n", atkbd->name, serio->phys);
+ input_register_device(atkbd->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(dev);
+ kfree(atkbd);
+ return err;
}
/*
@@ -896,9 +893,9 @@
atkbd_disable(atkbd);
if (atkbd->write) {
- param[0] = (test_bit(LED_SCROLLL, atkbd->dev.led) ? 1 : 0)
- | (test_bit(LED_NUML, atkbd->dev.led) ? 2 : 0)
- | (test_bit(LED_CAPSL, atkbd->dev.led) ? 4 : 0);
+ param[0] = (test_bit(LED_SCROLLL, atkbd->dev->led) ? 1 : 0)
+ | (test_bit(LED_NUML, atkbd->dev->led) ? 2 : 0)
+ | (test_bit(LED_CAPSL, atkbd->dev->led) ? 4 : 0);
if (atkbd_probe(atkbd))
return -1;
@@ -1008,6 +1005,7 @@
static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count)
{
+ struct input_dev *new_dev;
unsigned long value;
char *rest;
@@ -1019,12 +1017,19 @@
return -EINVAL;
if (atkbd->extra != value) {
- /* unregister device as it's properties will change */
- input_unregister_device(&atkbd->dev);
+ /*
+ * Since device's properties will change we need to
+ * unregister old device. But allocate new one first
+ * to make sure we have it.
+ */
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+ input_unregister_device(atkbd->dev);
+ atkbd->dev = new_dev;
atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
atkbd_activate(atkbd);
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
+ input_register_device(atkbd->dev);
}
return count;
}
@@ -1036,6 +1041,7 @@
static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count)
{
+ struct input_dev *new_dev;
unsigned long value;
char *rest;
@@ -1044,12 +1050,14 @@
return -EINVAL;
if (atkbd->scroll != value) {
- /* unregister device as it's properties will change */
- input_unregister_device(&atkbd->dev);
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+ input_unregister_device(atkbd->dev);
+ atkbd->dev = new_dev;
atkbd->scroll = value;
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
+ input_register_device(atkbd->dev);
}
return count;
}
@@ -1061,6 +1069,7 @@
static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
{
+ struct input_dev *new_dev;
unsigned long value;
char *rest;
@@ -1072,13 +1081,15 @@
return -EINVAL;
if (atkbd->set != value) {
- /* unregister device as it's properties will change */
- input_unregister_device(&atkbd->dev);
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+ input_unregister_device(atkbd->dev);
+ atkbd->dev = new_dev;
atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
atkbd_activate(atkbd);
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
+ input_register_device(atkbd->dev);
}
return count;
}
@@ -1090,6 +1101,7 @@
static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count)
{
+ struct input_dev *new_dev;
unsigned long value;
char *rest;
@@ -1101,15 +1113,16 @@
return -EINVAL;
if (atkbd->softrepeat != value) {
- /* unregister device as it's properties will change */
- input_unregister_device(&atkbd->dev);
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+ input_unregister_device(atkbd->dev);
+ atkbd->dev = new_dev;
atkbd->softrepeat = value;
if (atkbd->softrepeat)
atkbd->softraw = 1;
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
+ input_register_device(atkbd->dev);
}
-
return count;
}
@@ -1121,6 +1134,7 @@
static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count)
{
+ struct input_dev *new_dev;
unsigned long value;
char *rest;
@@ -1129,11 +1143,13 @@
return -EINVAL;
if (atkbd->softraw != value) {
- /* unregister device as it's properties will change */
- input_unregister_device(&atkbd->dev);
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+ input_unregister_device(atkbd->dev);
+ atkbd->dev = new_dev;
atkbd->softraw = value;
atkbd_set_device_attrs(atkbd);
- input_register_device(&atkbd->dev);
+ input_register_device(atkbd->dev);
}
return count;
}
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index cd4b6e7..3210d29 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -70,8 +70,7 @@
struct corgikbd {
unsigned char keycode[ARRAY_SIZE(corgikbd_keycode)];
- struct input_dev input;
- char phys[32];
+ struct input_dev *input;
spinlock_t lock;
struct timer_list timer;
@@ -147,7 +146,7 @@
spin_lock_irqsave(&corgikbd_data->lock, flags);
if (regs)
- input_regs(&corgikbd_data->input, regs);
+ input_regs(corgikbd_data->input, regs);
num_pressed = 0;
for (col = 0; col < KB_COLS; col++) {
@@ -169,14 +168,14 @@
scancode = SCANCODE(row, col);
pressed = rowd & KB_ROWMASK(row);
- input_report_key(&corgikbd_data->input, corgikbd_data->keycode[scancode], pressed);
+ input_report_key(corgikbd_data->input, corgikbd_data->keycode[scancode], pressed);
if (pressed)
num_pressed++;
if (pressed && (corgikbd_data->keycode[scancode] == CORGI_KEY_OFF)
&& time_after(jiffies, corgikbd_data->suspend_jiffies + HZ)) {
- input_event(&corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1);
+ input_event(corgikbd_data->input, EV_PWR, CORGI_KEY_OFF, 1);
corgikbd_data->suspend_jiffies=jiffies;
}
}
@@ -185,7 +184,7 @@
corgikbd_activate_all();
- input_sync(&corgikbd_data->input);
+ input_sync(corgikbd_data->input);
/* if any keys are pressed, enable the timer */
if (num_pressed)
@@ -249,9 +248,9 @@
if (hinge_count >= HINGE_STABLE_COUNT) {
spin_lock_irqsave(&corgikbd_data->lock, flags);
- input_report_switch(&corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
- input_report_switch(&corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
- input_sync(&corgikbd_data->input);
+ input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
+ input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
+ input_sync(corgikbd_data->input);
spin_unlock_irqrestore(&corgikbd_data->lock, flags);
}
@@ -260,24 +259,22 @@
}
#ifdef CONFIG_PM
-static int corgikbd_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int corgikbd_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- struct corgikbd *corgikbd = dev_get_drvdata(dev);
- corgikbd->suspended = 1;
- }
+ struct corgikbd *corgikbd = dev_get_drvdata(dev);
+ corgikbd->suspended = 1;
+
return 0;
}
-static int corgikbd_resume(struct device *dev, uint32_t level)
+static int corgikbd_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- struct corgikbd *corgikbd = dev_get_drvdata(dev);
+ struct corgikbd *corgikbd = dev_get_drvdata(dev);
- /* Upon resume, ignore the suspend key for a short while */
- corgikbd->suspend_jiffies=jiffies;
- corgikbd->suspended = 0;
- }
+ /* Upon resume, ignore the suspend key for a short while */
+ corgikbd->suspend_jiffies=jiffies;
+ corgikbd->suspended = 0;
+
return 0;
}
#else
@@ -287,16 +284,21 @@
static int __init corgikbd_probe(struct device *dev)
{
- int i;
struct corgikbd *corgikbd;
+ struct input_dev *input_dev;
+ int i;
corgikbd = kzalloc(sizeof(struct corgikbd), GFP_KERNEL);
- if (!corgikbd)
+ input_dev = input_allocate_device();
+ if (!corgikbd || !input_dev) {
+ kfree(corgikbd);
+ input_free_device(input_dev);
return -ENOMEM;
+ }
- dev_set_drvdata(dev,corgikbd);
- strcpy(corgikbd->phys, "corgikbd/input0");
+ dev_set_drvdata(dev, corgikbd);
+ corgikbd->input = input_dev;
spin_lock_init(&corgikbd->lock);
/* Init Keyboard rescan timer */
@@ -311,28 +313,30 @@
corgikbd->suspend_jiffies=jiffies;
- init_input_dev(&corgikbd->input);
- corgikbd->input.private = corgikbd;
- corgikbd->input.name = "Corgi Keyboard";
- corgikbd->input.dev = dev;
- corgikbd->input.phys = corgikbd->phys;
- corgikbd->input.id.bustype = BUS_HOST;
- corgikbd->input.id.vendor = 0x0001;
- corgikbd->input.id.product = 0x0001;
- corgikbd->input.id.version = 0x0100;
- corgikbd->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW);
- corgikbd->input.keycode = corgikbd->keycode;
- corgikbd->input.keycodesize = sizeof(unsigned char);
- corgikbd->input.keycodemax = ARRAY_SIZE(corgikbd_keycode);
-
memcpy(corgikbd->keycode, corgikbd_keycode, sizeof(corgikbd->keycode));
- for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
- set_bit(corgikbd->keycode[i], corgikbd->input.keybit);
- clear_bit(0, corgikbd->input.keybit);
- set_bit(SW_0, corgikbd->input.swbit);
- set_bit(SW_1, corgikbd->input.swbit);
- input_register_device(&corgikbd->input);
+ input_dev->name = "Corgi Keyboard";
+ input_dev->phys = "corgikbd/input0";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = dev;
+ input_dev->private = corgikbd;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW);
+ input_dev->keycode = corgikbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(corgikbd_keycode);
+
+ for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
+ set_bit(corgikbd->keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
+ set_bit(SW_0, input_dev->swbit);
+ set_bit(SW_1, input_dev->swbit);
+
+ input_register_device(corgikbd->input);
+
mod_timer(&corgikbd->htimer, jiffies + HINGE_SCAN_INTERVAL);
/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
@@ -349,8 +353,6 @@
for (i = 0; i < CORGI_KEY_STROBE_NUM; i++)
pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH);
- printk(KERN_INFO "input: Corgi Keyboard Registered\n");
-
return 0;
}
@@ -365,7 +367,7 @@
del_timer_sync(&corgikbd->htimer);
del_timer_sync(&corgikbd->timer);
- input_unregister_device(&corgikbd->input);
+ input_unregister_device(corgikbd->input);
kfree(corgikbd);
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index ef78bff..0a90962 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -204,7 +204,7 @@
hil_packet packet;
int idx;
- kbd = (struct hil_kbd *)serio->private;
+ kbd = serio_get_drvdata(serio);
if (kbd == NULL) {
BUG();
return IRQ_HANDLED;
@@ -234,7 +234,7 @@
{
struct hil_kbd *kbd;
- kbd = (struct hil_kbd *)serio->private;
+ kbd = serio_get_drvdata(serio);
if (kbd == NULL) {
BUG();
return;
@@ -245,20 +245,20 @@
kfree(kbd);
}
-static void hil_kbd_connect(struct serio *serio, struct serio_driver *drv)
+static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct hil_kbd *kbd;
uint8_t did, *idd;
int i;
- if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return;
-
- if (!(kbd = kmalloc(sizeof(struct hil_kbd), GFP_KERNEL))) return;
+ kbd = kmalloc(sizeof(*kbd), GFP_KERNEL);
+ if (!kbd)
+ return -ENOMEM;
memset(kbd, 0, sizeof(struct hil_kbd));
if (serio_open(serio, drv)) goto bail0;
- serio->private = kbd;
+ serio_set_drvdata(serio, kbd);
kbd->serio = serio;
kbd->dev.private = kbd;
@@ -342,19 +342,31 @@
down(&(kbd->sem));
up(&(kbd->sem));
- return;
+ return 0;
bail1:
serio_close(serio);
bail0:
kfree(kbd);
+ serio_set_drvdata(serio, NULL);
+ return -EIO;
}
+static struct serio_device_id hil_kbd_ids[] = {
+ {
+ .type = SERIO_HIL_MLC,
+ .proto = SERIO_HIL,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
struct serio_driver hil_kbd_serio_drv = {
.driver = {
.name = "hil_kbd",
},
.description = "HP HIL keyboard driver",
+ .id_table = hil_kbd_ids,
.connect = hil_kbd_connect,
.disconnect = hil_kbd_disconnect,
.interrupt = hil_kbd_interrupt
diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
index eecb77d..e95bc05 100644
--- a/drivers/input/keyboard/hilkbd.c
+++ b/drivers/input/keyboard/hilkbd.c
@@ -22,7 +22,7 @@
#include <linux/errno.h>
#include <linux/input.h>
#include <linux/init.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <linux/hil.h>
#include <linux/spinlock.h>
@@ -278,11 +278,11 @@
hil_init_chip(struct parisc_device *dev)
{
if (!dev->irq) {
- printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa);
+ printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start);
return -ENODEV;
}
- hil_base = dev->hpa;
+ hil_base = dev->hpa.start;
hil_irq = dev->irq;
hil_dev.dev_id = dev;
@@ -299,7 +299,7 @@
MODULE_DEVICE_TABLE(parisc, hil_tbl);
static struct parisc_driver hil_driver = {
- .name = "HIL",
+ .name = "hil",
.id_table = hil_tbl,
.probe = hil_init_chip,
};
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index 098963c..7f06780 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -102,7 +102,7 @@
module_param (ctrlclick_volume, int, 0);
MODULE_PARM_DESC (ctrlclick_volume, "Ctrlclick volume (in %), default is 100%");
-static int lk201_compose_is_alt = 0;
+static int lk201_compose_is_alt;
module_param (lk201_compose_is_alt, int, 0);
MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key "
"will act as an Alt key");
@@ -274,7 +274,7 @@
};
#define CHECK_LED(LED, BITS) do { \
- if (test_bit (LED, lk->dev.led)) \
+ if (test_bit (LED, lk->dev->led)) \
leds_on |= BITS; \
else \
leds_off |= BITS; \
@@ -287,7 +287,7 @@
lk_keycode_t keycode[LK_NUM_KEYCODES];
int ignore_bytes;
unsigned char id[LK_NUM_IGNORE_BYTES];
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
struct work_struct tq;
char name[64];
@@ -423,8 +423,7 @@
DBG (KERN_INFO "Got byte 0x%02x\n", data);
if (lk->ignore_bytes > 0) {
- DBG (KERN_INFO "Ignoring a byte on %s\n",
- lk->name);
+ DBG (KERN_INFO "Ignoring a byte on %s\n", lk->name);
lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
if (lk->ignore_bytes == 0)
@@ -435,14 +434,14 @@
switch (data) {
case LK_ALL_KEYS_UP:
- input_regs (&lk->dev, regs);
+ input_regs (lk->dev, regs);
for (i = 0; i < ARRAY_SIZE (lkkbd_keycode); i++)
if (lk->keycode[i] != KEY_RESERVED)
- input_report_key (&lk->dev, lk->keycode[i], 0);
- input_sync (&lk->dev);
+ input_report_key (lk->dev, lk->keycode[i], 0);
+ input_sync (lk->dev);
break;
case LK_METRONOME:
- DBG (KERN_INFO "Got LK_METRONOME and don't "
+ DBG (KERN_INFO "Got %#d and don't "
"know how to handle...\n");
break;
case LK_OUTPUT_ERROR:
@@ -482,12 +481,12 @@
default:
if (lk->keycode[data] != KEY_RESERVED) {
- input_regs (&lk->dev, regs);
- if (!test_bit (lk->keycode[data], lk->dev.key))
- input_report_key (&lk->dev, lk->keycode[data], 1);
+ input_regs (lk->dev, regs);
+ if (!test_bit (lk->keycode[data], lk->dev->key))
+ input_report_key (lk->dev, lk->keycode[data], 1);
else
- input_report_key (&lk->dev, lk->keycode[data], 0);
- input_sync (&lk->dev);
+ input_report_key (lk->dev, lk->keycode[data], 0);
+ input_sync (lk->dev);
} else
printk (KERN_WARNING "%s: Unknown key with "
"scancode 0x%02x on %s.\n",
@@ -605,7 +604,7 @@
lk->serio->write (lk->serio, volume_to_hw (lk->bell_volume));
/* Enable/disable keyclick (and possibly set volume) */
- if (test_bit (SND_CLICK, lk->dev.snd)) {
+ if (test_bit (SND_CLICK, lk->dev->snd)) {
lk->serio->write (lk->serio, LK_CMD_ENABLE_KEYCLICK);
lk->serio->write (lk->serio, volume_to_hw (lk->keyclick_volume));
lk->serio->write (lk->serio, LK_CMD_ENABLE_CTRCLICK);
@@ -616,7 +615,7 @@
}
/* Sound the bell if needed */
- if (test_bit (SND_BELL, lk->dev.snd))
+ if (test_bit (SND_BELL, lk->dev->snd))
lk->serio->write (lk->serio, LK_CMD_SOUND_BELL);
}
@@ -627,71 +626,70 @@
lkkbd_connect (struct serio *serio, struct serio_driver *drv)
{
struct lkkbd *lk;
+ struct input_dev *input_dev;
int i;
int err;
- if (!(lk = kmalloc (sizeof (struct lkkbd), GFP_KERNEL)))
- return -ENOMEM;
-
- memset (lk, 0, sizeof (struct lkkbd));
-
- init_input_dev (&lk->dev);
- set_bit (EV_KEY, lk->dev.evbit);
- set_bit (EV_LED, lk->dev.evbit);
- set_bit (EV_SND, lk->dev.evbit);
- set_bit (EV_REP, lk->dev.evbit);
- set_bit (LED_CAPSL, lk->dev.ledbit);
- set_bit (LED_SLEEP, lk->dev.ledbit);
- set_bit (LED_COMPOSE, lk->dev.ledbit);
- set_bit (LED_SCROLLL, lk->dev.ledbit);
- set_bit (SND_BELL, lk->dev.sndbit);
- set_bit (SND_CLICK, lk->dev.sndbit);
+ lk = kzalloc (sizeof (struct lkkbd), GFP_KERNEL);
+ input_dev = input_allocate_device ();
+ if (!lk || !input_dev) {
+ err = -ENOMEM;
+ goto fail;
+ }
lk->serio = serio;
-
+ lk->dev = input_dev;
INIT_WORK (&lk->tq, lkkbd_reinit, lk);
-
lk->bell_volume = bell_volume;
lk->keyclick_volume = keyclick_volume;
lk->ctrlclick_volume = ctrlclick_volume;
+ memcpy (lk->keycode, lkkbd_keycode, sizeof (lk_keycode_t) * LK_NUM_KEYCODES);
- lk->dev.keycode = lk->keycode;
- lk->dev.keycodesize = sizeof (lk_keycode_t);
- lk->dev.keycodemax = LK_NUM_KEYCODES;
+ strlcpy (lk->name, "DEC LK keyboard", sizeof(lk->name));
+ snprintf (lk->phys, sizeof(lk->phys), "%s/input0", serio->phys);
- lk->dev.event = lkkbd_event;
- lk->dev.private = lk;
+ input_dev->name = lk->name;
+ input_dev->phys = lk->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_LKKBD;
+ input_dev->id.product = 0;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->event = lkkbd_event;
+ input_dev->private = lk;
+
+ set_bit (EV_KEY, input_dev->evbit);
+ set_bit (EV_LED, input_dev->evbit);
+ set_bit (EV_SND, input_dev->evbit);
+ set_bit (EV_REP, input_dev->evbit);
+ set_bit (LED_CAPSL, input_dev->ledbit);
+ set_bit (LED_SLEEP, input_dev->ledbit);
+ set_bit (LED_COMPOSE, input_dev->ledbit);
+ set_bit (LED_SCROLLL, input_dev->ledbit);
+ set_bit (SND_BELL, input_dev->sndbit);
+ set_bit (SND_CLICK, input_dev->sndbit);
+
+ input_dev->keycode = lk->keycode;
+ input_dev->keycodesize = sizeof (lk_keycode_t);
+ input_dev->keycodemax = LK_NUM_KEYCODES;
+ for (i = 0; i < LK_NUM_KEYCODES; i++)
+ set_bit (lk->keycode[i], input_dev->keybit);
serio_set_drvdata (serio, lk);
err = serio_open (serio, drv);
- if (err) {
- serio_set_drvdata (serio, NULL);
- kfree (lk);
- return err;
- }
+ if (err)
+ goto fail;
- sprintf (lk->name, "DEC LK keyboard");
- sprintf (lk->phys, "%s/input0", serio->phys);
-
- memcpy (lk->keycode, lkkbd_keycode, sizeof (lk_keycode_t) * LK_NUM_KEYCODES);
- for (i = 0; i < LK_NUM_KEYCODES; i++)
- set_bit (lk->keycode[i], lk->dev.keybit);
-
- lk->dev.name = lk->name;
- lk->dev.phys = lk->phys;
- lk->dev.id.bustype = BUS_RS232;
- lk->dev.id.vendor = SERIO_LKKBD;
- lk->dev.id.product = 0;
- lk->dev.id.version = 0x0100;
- lk->dev.dev = &serio->dev;
-
- input_register_device (&lk->dev);
-
- printk (KERN_INFO "input: %s on %s, initiating reset\n", lk->name, serio->phys);
+ input_register_device (lk->dev);
lk->serio->write (lk->serio, LK_CMD_POWERCYCLE_RESET);
return 0;
+
+ fail: serio_set_drvdata (serio, NULL);
+ input_free_device (input_dev);
+ kfree (lk);
+ return err;
}
/*
@@ -702,9 +700,11 @@
{
struct lkkbd *lk = serio_get_drvdata (serio);
- input_unregister_device (&lk->dev);
+ input_get_device (lk->dev);
+ input_unregister_device (lk->dev);
serio_close (serio);
serio_set_drvdata (serio, NULL);
+ input_put_device (lk->dev);
kfree (lk);
}
diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c
index eecbde2..cc6aaf9 100644
--- a/drivers/input/keyboard/maple_keyb.c
+++ b/drivers/input/keyboard/maple_keyb.c
@@ -37,7 +37,7 @@
struct dc_kbd {
- struct input_dev dev;
+ struct input_dev *dev;
unsigned char new[8];
unsigned char old[8];
};
@@ -46,30 +46,24 @@
static void dc_scan_kbd(struct dc_kbd *kbd)
{
int i;
- struct input_dev *dev = &kbd->dev;
+ struct input_dev *dev = kbd->dev;
- for(i=0; i<8; i++)
- input_report_key(dev,
- dc_kbd_keycode[i+224],
- (kbd->new[0]>>i)&1);
+ for (i = 0; i < 8; i++)
+ input_report_key(dev, dc_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1);
- for(i=2; i<8; i++) {
+ for (i = 2; i < 8; i++) {
- if(kbd->old[i]>3&&memscan(kbd->new+2, kbd->old[i], 6)==NULL) {
- if(dc_kbd_keycode[kbd->old[i]])
- input_report_key(dev,
- dc_kbd_keycode[kbd->old[i]],
- 0);
+ if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == NULL) {
+ if (dc_kbd_keycode[kbd->old[i]])
+ input_report_key(dev, dc_kbd_keycode[kbd->old[i]], 0);
else
printk("Unknown key (scancode %#x) released.",
kbd->old[i]);
}
- if(kbd->new[i]>3&&memscan(kbd->old+2, kbd->new[i], 6)!=NULL) {
+ if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) != NULL) {
if(dc_kbd_keycode[kbd->new[i]])
- input_report_key(dev,
- dc_kbd_keycode[kbd->new[i]],
- 1);
+ input_report_key(dev, dc_kbd_keycode[kbd->new[i]], 1);
else
printk("Unknown key (scancode %#x) pressed.",
kbd->new[i]);
@@ -89,43 +83,39 @@
unsigned long *buf = mq->recvbuf;
if (buf[1] == mapledev->function) {
- memcpy(kbd->new, buf+2, 8);
+ memcpy(kbd->new, buf + 2, 8);
dc_scan_kbd(kbd);
}
}
static int dc_kbd_connect(struct maple_device *dev)
{
- int i;
- unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]);
struct dc_kbd *kbd;
+ struct input_dev *input_dev;
+ unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]);
+ int i;
- if (!(kbd = kmalloc(sizeof(struct dc_kbd), GFP_KERNEL)))
- return -1;
- memset(kbd, 0, sizeof(struct dc_kbd));
+ dev->private_data = kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!kbd || !input_dev) {
+ kfree(kbd);
+ input_free_device(input_dev);
+ return -ENOMEM;
+ }
- dev->private_data = kbd;
+ kbd->dev = input_dev;
- kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ input_dev->name = dev->product_name;
+ input_dev->id.bustype = BUS_MAPLE;
+ input_dev->private = kbd;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ for (i = 0; i < 255; i++)
+ set_bit(dc_kbd_keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
- init_input_dev(&kbd->dev);
-
- for (i=0; i<255; i++)
- set_bit(dc_kbd_keycode[i], kbd->dev.keybit);
-
- clear_bit(0, kbd->dev.keybit);
-
- kbd->dev.private = kbd;
-
- kbd->dev.name = dev->product_name;
- kbd->dev.id.bustype = BUS_MAPLE;
-
- input_register_device(&kbd->dev);
+ input_register_device(kbd->dev);
maple_getcond_callback(dev, dc_kbd_callback, 1, MAPLE_FUNC_KEYBOARD);
-
- printk(KERN_INFO "input: keyboard(0x%lx): %s\n", data, kbd->dev.name);
-
return 0;
}
@@ -134,7 +124,7 @@
{
struct dc_kbd *kbd = dev->private_data;
- input_unregister_device(&kbd->dev);
+ input_unregister_device(kbd->dev);
kfree(kbd);
}
diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c
index 2e8ce16..d10983c 100644
--- a/drivers/input/keyboard/newtonkbd.c
+++ b/drivers/input/keyboard/newtonkbd.c
@@ -57,11 +57,9 @@
KEY_LEFT, KEY_RIGHT, KEY_DOWN, KEY_UP, 0
};
-static char *nkbd_name = "Newton Keyboard";
-
struct nkbd {
unsigned char keycode[128];
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
char phys[32];
};
@@ -73,13 +71,13 @@
/* invalid scan codes are probably the init sequence, so we ignore them */
if (nkbd->keycode[data & NKBD_KEY]) {
- input_regs(&nkbd->dev, regs);
- input_report_key(&nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS);
- input_sync(&nkbd->dev);
+ input_regs(nkbd->dev, regs);
+ input_report_key(nkbd->dev, nkbd->keycode[data & NKBD_KEY], data & NKBD_PRESS);
+ input_sync(nkbd->dev);
}
else if (data == 0xe7) /* end of init sequence */
- printk(KERN_INFO "input: %s on %s\n", nkbd_name, serio->phys);
+ printk(KERN_INFO "input: %s on %s\n", nkbd->dev->name, serio->phys);
return IRQ_HANDLED;
}
@@ -87,62 +85,59 @@
static int nkbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct nkbd *nkbd;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
int i;
- int err;
- if (!(nkbd = kmalloc(sizeof(struct nkbd), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(nkbd, 0, sizeof(struct nkbd));
-
- nkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ nkbd = kzalloc(sizeof(struct nkbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!nkbd || !input_dev)
+ goto fail;
nkbd->serio = serio;
+ nkbd->dev = input_dev;
+ sprintf(nkbd->phys, "%s/input0", serio->phys);
+ memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode));
- init_input_dev(&nkbd->dev);
- nkbd->dev.keycode = nkbd->keycode;
- nkbd->dev.keycodesize = sizeof(unsigned char);
- nkbd->dev.keycodemax = ARRAY_SIZE(nkbd_keycode);
- nkbd->dev.private = nkbd;
+ input_dev->name = "Newton Keyboard";
+ input_dev->phys = nkbd->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_NEWTON;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = nkbd;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ input_dev->keycode = nkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(nkbd_keycode);
+ for (i = 0; i < 128; i++)
+ set_bit(nkbd->keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
serio_set_drvdata(serio, nkbd);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(nkbd);
- return err;
- }
+ if (err)
+ goto fail;
- memcpy(nkbd->keycode, nkbd_keycode, sizeof(nkbd->keycode));
- for (i = 0; i < 128; i++)
- set_bit(nkbd->keycode[i], nkbd->dev.keybit);
- clear_bit(0, nkbd->dev.keybit);
-
- sprintf(nkbd->phys, "%s/input0", serio->phys);
-
- nkbd->dev.name = nkbd_name;
- nkbd->dev.phys = nkbd->phys;
- nkbd->dev.id.bustype = BUS_RS232;
- nkbd->dev.id.vendor = SERIO_NEWTON;
- nkbd->dev.id.product = 0x0001;
- nkbd->dev.id.version = 0x0100;
- nkbd->dev.dev = &serio->dev;
-
- input_register_device(&nkbd->dev);
-
- printk(KERN_INFO "input: %s on %s\n", nkbd_name, serio->phys);
-
+ input_register_device(nkbd->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(nkbd);
+ return err;
}
static void nkbd_disconnect(struct serio *serio)
{
struct nkbd *nkbd = serio_get_drvdata(serio);
- input_unregister_device(&nkbd->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(nkbd->dev);
kfree(nkbd);
}
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 344f460..cee9c73 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -85,7 +85,7 @@
struct spitzkbd {
unsigned char keycode[ARRAY_SIZE(spitzkbd_keycode)];
- struct input_dev input;
+ struct input_dev *input;
char phys[32];
spinlock_t lock;
@@ -187,8 +187,7 @@
spin_lock_irqsave(&spitzkbd_data->lock, flags);
- if (regs)
- input_regs(&spitzkbd_data->input, regs);
+ input_regs(spitzkbd_data->input, regs);
num_pressed = 0;
for (col = 0; col < KB_COLS; col++) {
@@ -210,7 +209,7 @@
scancode = SCANCODE(row, col);
pressed = rowd & KB_ROWMASK(row);
- input_report_key(&spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed);
+ input_report_key(spitzkbd_data->input, spitzkbd_data->keycode[scancode], pressed);
if (pressed)
num_pressed++;
@@ -220,15 +219,15 @@
spitzkbd_activate_all();
- input_report_key(&spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 );
- input_report_key(&spitzkbd_data->input, KEY_SUSPEND, pwrkey);
+ input_report_key(spitzkbd_data->input, SPITZ_KEY_SYNC, (GPLR(SPITZ_GPIO_SYNC) & GPIO_bit(SPITZ_GPIO_SYNC)) != 0 );
+ input_report_key(spitzkbd_data->input, KEY_SUSPEND, pwrkey);
if (pwrkey && time_after(jiffies, spitzkbd_data->suspend_jiffies + msecs_to_jiffies(1000))) {
- input_event(&spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1);
+ input_event(spitzkbd_data->input, EV_PWR, KEY_SUSPEND, 1);
spitzkbd_data->suspend_jiffies = jiffies;
}
- input_sync(&spitzkbd_data->input);
+ input_sync(spitzkbd_data->input);
/* if any keys are pressed, enable the timer */
if (num_pressed)
@@ -259,6 +258,7 @@
static void spitzkbd_timer_callback(unsigned long data)
{
struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data;
+
spitzkbd_scankeyboard(spitzkbd_data, NULL);
}
@@ -298,9 +298,9 @@
if (hinge_count >= HINGE_STABLE_COUNT) {
spin_lock_irqsave(&spitzkbd_data->lock, flags);
- input_report_switch(&spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
- input_report_switch(&spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
- input_sync(&spitzkbd_data->input);
+ input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
+ input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+ input_sync(spitzkbd_data->input);
spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
} else {
@@ -309,34 +309,32 @@
}
#ifdef CONFIG_PM
-static int spitzkbd_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int spitzkbd_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- int i;
- struct spitzkbd *spitzkbd = dev_get_drvdata(dev);
- spitzkbd->suspended = 1;
+ int i;
+ struct spitzkbd *spitzkbd = dev_get_drvdata(dev);
+ spitzkbd->suspended = 1;
- /* Set Strobe lines as inputs - *except* strobe line 0 leave this
- enabled so we can detect a power button press for resume */
- for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++)
- pxa_gpio_mode(spitz_strobes[i] | GPIO_IN);
- }
+ /* Set Strobe lines as inputs - *except* strobe line 0 leave this
+ enabled so we can detect a power button press for resume */
+ for (i = 1; i < SPITZ_KEY_STROBE_NUM; i++)
+ pxa_gpio_mode(spitz_strobes[i] | GPIO_IN);
+
return 0;
}
-static int spitzkbd_resume(struct device *dev, uint32_t level)
+static int spitzkbd_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- int i;
- struct spitzkbd *spitzkbd = dev_get_drvdata(dev);
+ int i;
+ struct spitzkbd *spitzkbd = dev_get_drvdata(dev);
- for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++)
- pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH);
+ for (i = 0; i < SPITZ_KEY_STROBE_NUM; i++)
+ pxa_gpio_mode(spitz_strobes[i] | GPIO_OUT | GPIO_DFLT_HIGH);
- /* Upon resume, ignore the suspend key for a short while */
- spitzkbd->suspend_jiffies = jiffies;
- spitzkbd->suspended = 0;
- }
+ /* Upon resume, ignore the suspend key for a short while */
+ spitzkbd->suspend_jiffies = jiffies;
+ spitzkbd->suspended = 0;
+
return 0;
}
#else
@@ -346,14 +344,21 @@
static int __init spitzkbd_probe(struct device *dev)
{
- int i;
struct spitzkbd *spitzkbd;
+ struct input_dev *input_dev;
+ int i;
spitzkbd = kzalloc(sizeof(struct spitzkbd), GFP_KERNEL);
if (!spitzkbd)
return -ENOMEM;
- dev_set_drvdata(dev,spitzkbd);
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ kfree(spitzkbd);
+ return -ENOMEM;
+ }
+
+ dev_set_drvdata(dev, spitzkbd);
strcpy(spitzkbd->phys, "spitzkbd/input0");
spin_lock_init(&spitzkbd->lock);
@@ -368,30 +373,34 @@
spitzkbd->htimer.function = spitzkbd_hinge_timer;
spitzkbd->htimer.data = (unsigned long) spitzkbd;
- spitzkbd->suspend_jiffies=jiffies;
+ spitzkbd->suspend_jiffies = jiffies;
- init_input_dev(&spitzkbd->input);
- spitzkbd->input.private = spitzkbd;
- spitzkbd->input.name = "Spitz Keyboard";
- spitzkbd->input.dev = dev;
- spitzkbd->input.phys = spitzkbd->phys;
- spitzkbd->input.id.bustype = BUS_HOST;
- spitzkbd->input.id.vendor = 0x0001;
- spitzkbd->input.id.product = 0x0001;
- spitzkbd->input.id.version = 0x0100;
- spitzkbd->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW);
- spitzkbd->input.keycode = spitzkbd->keycode;
- spitzkbd->input.keycodesize = sizeof(unsigned char);
- spitzkbd->input.keycodemax = ARRAY_SIZE(spitzkbd_keycode);
+ spitzkbd->input = input_dev;
+
+ input_dev->private = spitzkbd;
+ input_dev->name = "Spitz Keyboard";
+ input_dev->phys = spitzkbd->phys;
+ input_dev->cdev.dev = dev;
+
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_PWR) | BIT(EV_SW);
+ input_dev->keycode = spitzkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(spitzkbd_keycode);
memcpy(spitzkbd->keycode, spitzkbd_keycode, sizeof(spitzkbd->keycode));
for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
- set_bit(spitzkbd->keycode[i], spitzkbd->input.keybit);
- clear_bit(0, spitzkbd->input.keybit);
- set_bit(SW_0, spitzkbd->input.swbit);
- set_bit(SW_1, spitzkbd->input.swbit);
+ set_bit(spitzkbd->keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
+ set_bit(SW_0, input_dev->swbit);
+ set_bit(SW_1, input_dev->swbit);
- input_register_device(&spitzkbd->input);
+ input_register_device(input_dev);
+
mod_timer(&spitzkbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
@@ -444,7 +453,7 @@
del_timer_sync(&spitzkbd->htimer);
del_timer_sync(&spitzkbd->timer);
- input_unregister_device(&spitzkbd->input);
+ input_unregister_device(spitzkbd->input);
kfree(spitzkbd);
diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
index 4bae5d8..b15b6d8 100644
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -76,13 +76,14 @@
struct sunkbd {
unsigned char keycode[128];
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
struct work_struct tq;
wait_queue_head_t wait;
char name[64];
char phys[32];
char type;
+ unsigned char enabled;
volatile s8 reset;
volatile s8 layout;
};
@@ -124,10 +125,13 @@
break;
default:
+ if (!sunkbd->enabled)
+ break;
+
if (sunkbd->keycode[data & SUNKBD_KEY]) {
- input_regs(&sunkbd->dev, regs);
- input_report_key(&sunkbd->dev, sunkbd->keycode[data & SUNKBD_KEY], !(data & SUNKBD_RELEASE));
- input_sync(&sunkbd->dev);
+ input_regs(sunkbd->dev, regs);
+ input_report_key(sunkbd->dev, sunkbd->keycode[data & SUNKBD_KEY], !(data & SUNKBD_RELEASE));
+ input_sync(sunkbd->dev);
} else {
printk(KERN_WARNING "sunkbd.c: Unknown key (scancode %#x) %s.\n",
data & SUNKBD_KEY, data & SUNKBD_RELEASE ? "released" : "pressed");
@@ -184,7 +188,7 @@
sunkbd->reset = -2;
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_RESET);
wait_event_interruptible_timeout(sunkbd->wait, sunkbd->reset >= 0, HZ);
- if (sunkbd->reset <0)
+ if (sunkbd->reset < 0)
return -1;
sunkbd->type = sunkbd->reset;
@@ -213,10 +217,17 @@
sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_SETLED);
sunkbd->serio->write(sunkbd->serio,
- (!!test_bit(LED_CAPSL, sunkbd->dev.led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev.led) << 2) |
- (!!test_bit(LED_COMPOSE, sunkbd->dev.led) << 1) | !!test_bit(LED_NUML, sunkbd->dev.led));
- sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev.snd));
- sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev.snd));
+ (!!test_bit(LED_CAPSL, sunkbd->dev->led) << 3) | (!!test_bit(LED_SCROLLL, sunkbd->dev->led) << 2) |
+ (!!test_bit(LED_COMPOSE, sunkbd->dev->led) << 1) | !!test_bit(LED_NUML, sunkbd->dev->led));
+ sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_NOCLICK - !!test_bit(SND_CLICK, sunkbd->dev->snd));
+ sunkbd->serio->write(sunkbd->serio, SUNKBD_CMD_BELLOFF - !!test_bit(SND_BELL, sunkbd->dev->snd));
+}
+
+static void sunkbd_enable(struct sunkbd *sunkbd, int enable)
+{
+ serio_pause_rx(sunkbd->serio);
+ sunkbd->enabled = 1;
+ serio_continue_rx(sunkbd->serio);
}
/*
@@ -226,70 +237,64 @@
static int sunkbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct sunkbd *sunkbd;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
int i;
- int err;
- if (!(sunkbd = kmalloc(sizeof(struct sunkbd), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(sunkbd, 0, sizeof(struct sunkbd));
-
- init_input_dev(&sunkbd->dev);
- init_waitqueue_head(&sunkbd->wait);
-
- sunkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_SND) | BIT(EV_REP);
- sunkbd->dev.ledbit[0] = BIT(LED_CAPSL) | BIT(LED_COMPOSE) | BIT(LED_SCROLLL) | BIT(LED_NUML);
- sunkbd->dev.sndbit[0] = BIT(SND_CLICK) | BIT(SND_BELL);
+ sunkbd = kzalloc(sizeof(struct sunkbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!sunkbd || !input_dev)
+ goto fail;
sunkbd->serio = serio;
-
+ sunkbd->dev = input_dev;
+ init_waitqueue_head(&sunkbd->wait);
INIT_WORK(&sunkbd->tq, sunkbd_reinit, sunkbd);
-
- sunkbd->dev.keycode = sunkbd->keycode;
- sunkbd->dev.keycodesize = sizeof(unsigned char);
- sunkbd->dev.keycodemax = ARRAY_SIZE(sunkbd_keycode);
-
- sunkbd->dev.event = sunkbd_event;
- sunkbd->dev.private = sunkbd;
+ snprintf(sunkbd->phys, sizeof(sunkbd->phys), "%s/input0", serio->phys);
serio_set_drvdata(serio, sunkbd);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(sunkbd);
- return err;
- }
+ if (err)
+ goto fail;
if (sunkbd_initialize(sunkbd) < 0) {
serio_close(serio);
- serio_set_drvdata(serio, NULL);
- kfree(sunkbd);
- return -ENODEV;
+ goto fail;
}
sprintf(sunkbd->name, "Sun Type %d keyboard", sunkbd->type);
-
memcpy(sunkbd->keycode, sunkbd_keycode, sizeof(sunkbd->keycode));
+
+ input_dev->name = sunkbd->name;
+ input_dev->phys = sunkbd->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_SUNKBD;
+ input_dev->id.product = sunkbd->type;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = sunkbd;
+ input_dev->event = sunkbd_event;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_SND) | BIT(EV_REP);
+ input_dev->ledbit[0] = BIT(LED_CAPSL) | BIT(LED_COMPOSE) | BIT(LED_SCROLLL) | BIT(LED_NUML);
+ input_dev->sndbit[0] = BIT(SND_CLICK) | BIT(SND_BELL);
+
+ input_dev->keycode = sunkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(sunkbd_keycode);
for (i = 0; i < 128; i++)
- set_bit(sunkbd->keycode[i], sunkbd->dev.keybit);
- clear_bit(0, sunkbd->dev.keybit);
+ set_bit(sunkbd->keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
- sprintf(sunkbd->phys, "%s/input0", serio->phys);
-
- sunkbd->dev.name = sunkbd->name;
- sunkbd->dev.phys = sunkbd->phys;
- sunkbd->dev.id.bustype = BUS_RS232;
- sunkbd->dev.id.vendor = SERIO_SUNKBD;
- sunkbd->dev.id.product = sunkbd->type;
- sunkbd->dev.id.version = 0x0100;
- sunkbd->dev.dev = &serio->dev;
-
- input_register_device(&sunkbd->dev);
-
- printk(KERN_INFO "input: %s on %s\n", sunkbd->name, serio->phys);
-
+ sunkbd_enable(sunkbd, 1);
+ input_register_device(sunkbd->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(sunkbd);
+ return err;
}
/*
@@ -299,7 +304,9 @@
static void sunkbd_disconnect(struct serio *serio)
{
struct sunkbd *sunkbd = serio_get_drvdata(serio);
- input_unregister_device(&sunkbd->dev);
+
+ sunkbd_enable(sunkbd, 0);
+ input_unregister_device(sunkbd->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(sunkbd);
diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c
index 19eaec7..4135e3e 100644
--- a/drivers/input/keyboard/xtkbd.c
+++ b/drivers/input/keyboard/xtkbd.c
@@ -56,11 +56,9 @@
106
};
-static char *xtkbd_name = "XT Keyboard";
-
struct xtkbd {
unsigned char keycode[256];
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
char phys[32];
};
@@ -77,9 +75,9 @@
default:
if (xtkbd->keycode[data & XTKBD_KEY]) {
- input_regs(&xtkbd->dev, regs);
- input_report_key(&xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE));
- input_sync(&xtkbd->dev);
+ input_regs(xtkbd->dev, regs);
+ input_report_key(xtkbd->dev, xtkbd->keycode[data & XTKBD_KEY], !(data & XTKBD_RELEASE));
+ input_sync(xtkbd->dev);
} else {
printk(KERN_WARNING "xtkbd.c: Unknown key (scancode %#x) %s.\n",
data & XTKBD_KEY, data & XTKBD_RELEASE ? "released" : "pressed");
@@ -91,62 +89,60 @@
static int xtkbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct xtkbd *xtkbd;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
int i;
- int err;
- if (!(xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(xtkbd, 0, sizeof(struct xtkbd));
-
- xtkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ xtkbd = kmalloc(sizeof(struct xtkbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!xtkbd || !input_dev)
+ goto fail;
xtkbd->serio = serio;
+ xtkbd->dev = input_dev;
+ sprintf(xtkbd->phys, "%s/input0", serio->phys);
+ memcpy(xtkbd->keycode, xtkbd_keycode, sizeof(xtkbd->keycode));
- init_input_dev(&xtkbd->dev);
- xtkbd->dev.keycode = xtkbd->keycode;
- xtkbd->dev.keycodesize = sizeof(unsigned char);
- xtkbd->dev.keycodemax = ARRAY_SIZE(xtkbd_keycode);
- xtkbd->dev.private = xtkbd;
+ input_dev->name = "XT Keyboard";
+ input_dev->phys = xtkbd->phys;
+ input_dev->id.bustype = BUS_XTKBD;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = xtkbd;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ input_dev->keycode = xtkbd->keycode;
+ input_dev->keycodesize = sizeof(unsigned char);
+ input_dev->keycodemax = ARRAY_SIZE(xtkbd_keycode);
+
+ for (i = 0; i < 255; i++)
+ set_bit(xtkbd->keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
serio_set_drvdata(serio, xtkbd);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(xtkbd);
- return err;
- }
+ if (err)
+ goto fail;
- memcpy(xtkbd->keycode, xtkbd_keycode, sizeof(xtkbd->keycode));
- for (i = 0; i < 255; i++)
- set_bit(xtkbd->keycode[i], xtkbd->dev.keybit);
- clear_bit(0, xtkbd->dev.keybit);
-
- sprintf(xtkbd->phys, "%s/input0", serio->phys);
-
- xtkbd->dev.name = xtkbd_name;
- xtkbd->dev.phys = xtkbd->phys;
- xtkbd->dev.id.bustype = BUS_XTKBD;
- xtkbd->dev.id.vendor = 0x0001;
- xtkbd->dev.id.product = 0x0001;
- xtkbd->dev.id.version = 0x0100;
- xtkbd->dev.dev = &serio->dev;
-
- input_register_device(&xtkbd->dev);
-
- printk(KERN_INFO "input: %s on %s\n", xtkbd_name, serio->phys);
-
+ input_register_device(xtkbd->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(xtkbd);
+ return err;
}
static void xtkbd_disconnect(struct serio *serio)
{
struct xtkbd *xtkbd = serio_get_drvdata(serio);
- input_unregister_device(&xtkbd->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(xtkbd->dev);
kfree(xtkbd);
}
diff --git a/drivers/input/misc/m68kspkr.c b/drivers/input/misc/m68kspkr.c
index 64abdd9..04489ad 100644
--- a/drivers/input/misc/m68kspkr.c
+++ b/drivers/input/misc/m68kspkr.c
@@ -24,9 +24,7 @@
MODULE_DESCRIPTION("m68k beeper driver");
MODULE_LICENSE("GPL");
-static char m68kspkr_name[] = "m68k beeper";
-static char m68kspkr_phys[] = "m68k/generic";
-static struct input_dev m68kspkr_dev;
+static struct input_dev *m68kspkr_dev;
static int m68kspkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
{
@@ -51,32 +49,34 @@
static int __init m68kspkr_init(void)
{
- if (!mach_beep){
- printk("%s: no lowlevel beep support\n", m68kspkr_name);
- return -1;
+ if (!mach_beep) {
+ printk(KERN_INFO "m68kspkr: no lowlevel beep support\n");
+ return -ENODEV;
}
- m68kspkr_dev.evbit[0] = BIT(EV_SND);
- m68kspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
- m68kspkr_dev.event = m68kspkr_event;
+ m68kspkr_dev = input_allocate_device();
+ if (!m68kspkr_dev)
+ return -ENOMEM;
- m68kspkr_dev.name = m68kspkr_name;
- m68kspkr_dev.phys = m68kspkr_phys;
- m68kspkr_dev.id.bustype = BUS_HOST;
- m68kspkr_dev.id.vendor = 0x001f;
- m68kspkr_dev.id.product = 0x0001;
- m68kspkr_dev.id.version = 0x0100;
+ m68kspkr_dev->name = "m68k beeper";
+ m68kspkr_dev->phys = "m68k/generic";
+ m68kspkr_dev->id.bustype = BUS_HOST;
+ m68kspkr_dev->id.vendor = 0x001f;
+ m68kspkr_dev->id.product = 0x0001;
+ m68kspkr_dev->id.version = 0x0100;
- input_register_device(&m68kspkr_dev);
+ m68kspkr_dev->evbit[0] = BIT(EV_SND);
+ m68kspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+ m68kspkr_dev->event = m68kspkr_event;
- printk(KERN_INFO "input: %s\n", m68kspkr_name);
+ input_register_device(m68kspkr_dev);
return 0;
}
static void __exit m68kspkr_exit(void)
{
- input_unregister_device(&m68kspkr_dev);
+ input_unregister_device(m68kspkr_dev);
}
module_init(m68kspkr_init);
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index 3013194..e34633c 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -23,9 +23,7 @@
MODULE_DESCRIPTION("PC Speaker beeper driver");
MODULE_LICENSE("GPL");
-static char pcspkr_name[] = "PC Speaker";
-static char pcspkr_phys[] = "isa0061/input0";
-static struct input_dev pcspkr_dev;
+static struct input_dev *pcspkr_dev;
static DEFINE_SPINLOCK(i8253_beep_lock);
@@ -68,27 +66,29 @@
static int __init pcspkr_init(void)
{
- pcspkr_dev.evbit[0] = BIT(EV_SND);
- pcspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
- pcspkr_dev.event = pcspkr_event;
+ pcspkr_dev = input_allocate_device();
+ if (!pcspkr_dev)
+ return -ENOMEM;
- pcspkr_dev.name = pcspkr_name;
- pcspkr_dev.phys = pcspkr_phys;
- pcspkr_dev.id.bustype = BUS_ISA;
- pcspkr_dev.id.vendor = 0x001f;
- pcspkr_dev.id.product = 0x0001;
- pcspkr_dev.id.version = 0x0100;
+ pcspkr_dev->name = "PC Speaker";
+ pcspkr_dev->name = "isa0061/input0";
+ pcspkr_dev->id.bustype = BUS_ISA;
+ pcspkr_dev->id.vendor = 0x001f;
+ pcspkr_dev->id.product = 0x0001;
+ pcspkr_dev->id.version = 0x0100;
- input_register_device(&pcspkr_dev);
+ pcspkr_dev->evbit[0] = BIT(EV_SND);
+ pcspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+ pcspkr_dev->event = pcspkr_event;
- printk(KERN_INFO "input: %s\n", pcspkr_name);
+ input_register_device(pcspkr_dev);
return 0;
}
static void __exit pcspkr_exit(void)
{
- input_unregister_device(&pcspkr_dev);
+ input_unregister_device(pcspkr_dev);
/* turn off the speaker */
pcspkr_event(NULL, EV_SND, SND_BELL, 0);
}
diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c
index cdc3fb3..5778220 100644
--- a/drivers/input/misc/sparcspkr.c
+++ b/drivers/input/misc/sparcspkr.c
@@ -17,28 +17,24 @@
#endif
MODULE_AUTHOR("David S. Miller <davem@redhat.com>");
-MODULE_DESCRIPTION("PC Speaker beeper driver");
+MODULE_DESCRIPTION("Sparc Speaker beeper driver");
MODULE_LICENSE("GPL");
static unsigned long beep_iobase;
-
-static char *sparcspkr_isa_name = "Sparc ISA Speaker";
-static char *sparcspkr_ebus_name = "Sparc EBUS Speaker";
-static char *sparcspkr_phys = "sparc/input0";
-static struct input_dev sparcspkr_dev;
+static struct input_dev *sparcspkr_dev;
DEFINE_SPINLOCK(beep_lock);
static void __init init_sparcspkr_struct(void)
{
- sparcspkr_dev.evbit[0] = BIT(EV_SND);
- sparcspkr_dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+ sparcspkr_dev->evbit[0] = BIT(EV_SND);
+ sparcspkr_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
- sparcspkr_dev.phys = sparcspkr_phys;
- sparcspkr_dev.id.bustype = BUS_ISA;
- sparcspkr_dev.id.vendor = 0x001f;
- sparcspkr_dev.id.product = 0x0001;
- sparcspkr_dev.id.version = 0x0100;
+ sparcspkr_dev->phys = "sparc/input0";
+ sparcspkr_dev->id.bustype = BUS_ISA;
+ sparcspkr_dev->id.vendor = 0x001f;
+ sparcspkr_dev->id.product = 0x0001;
+ sparcspkr_dev->id.version = 0x0100;
}
static int ebus_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
@@ -84,14 +80,15 @@
{
beep_iobase = edev->resource[0].start;
- init_sparcspkr_struct();
+ sparcspkr_dev = input_allocate_device();
+ if (!sparcspkr_dev)
+ return -ENOMEM;
- sparcspkr_dev.name = sparcspkr_ebus_name;
- sparcspkr_dev.event = ebus_spkr_event;
+ sparcspkr_dev->name = "Sparc EBUS Speaker";
+ sparcspkr_dev->event = ebus_spkr_event;
- input_register_device(&sparcspkr_dev);
+ input_register_device(sparcspkr_dev);
- printk(KERN_INFO "input: %s\n", sparcspkr_ebus_name);
return 0;
}
@@ -137,15 +134,17 @@
{
beep_iobase = isa_dev->resource.start;
+ sparcspkr_dev = input_allocate_device();
+ if (!sparcspkr_dev)
+ return -ENOMEM;
+
init_sparcspkr_struct();
- sparcspkr_dev.name = sparcspkr_isa_name;
- sparcspkr_dev.event = isa_spkr_event;
- sparcspkr_dev.id.bustype = BUS_ISA;
+ sparcspkr_dev->name = "Sparc ISA Speaker";
+ sparcspkr_dev->event = isa_spkr_event;
input_register_device(&sparcspkr_dev);
- printk(KERN_INFO "input: %s\n", sparcspkr_isa_name);
return 0;
}
#endif
@@ -182,7 +181,7 @@
static void __exit sparcspkr_exit(void)
{
- input_unregister_device(&sparcspkr_dev);
+ input_unregister_device(sparcspkr_dev);
}
module_init(sparcspkr_init);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index b20783f..4acc7fd 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -79,8 +79,8 @@
{
struct alps_data *priv = psmouse->private;
unsigned char *packet = psmouse->packet;
- struct input_dev *dev = &psmouse->dev;
- struct input_dev *dev2 = &priv->dev2;
+ struct input_dev *dev = psmouse->dev;
+ struct input_dev *dev2 = priv->dev2;
int x, y, z, ges, fin, left, right, middle;
int back = 0, forward = 0;
@@ -379,20 +379,24 @@
static void alps_disconnect(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
+
psmouse_reset(psmouse);
- input_unregister_device(&priv->dev2);
+ input_unregister_device(priv->dev2);
kfree(priv);
}
int alps_init(struct psmouse *psmouse)
{
struct alps_data *priv;
+ struct input_dev *dev1 = psmouse->dev, *dev2;
int version;
- psmouse->private = priv = kmalloc(sizeof(struct alps_data), GFP_KERNEL);
- if (!priv)
+ psmouse->private = priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL);
+ dev2 = input_allocate_device();
+ if (!priv || !dev2)
goto init_fail;
- memset(priv, 0, sizeof(struct alps_data));
+
+ priv->dev2 = dev2;
if (!(priv->i = alps_get_model(psmouse, &version)))
goto init_fail;
@@ -411,41 +415,39 @@
if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
goto init_fail;
- psmouse->dev.evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
- psmouse->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- psmouse->dev.keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER);
- psmouse->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ dev1->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
+ dev1->keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
+ dev1->keybit[LONG(BTN_TOOL_FINGER)] |= BIT(BTN_TOOL_FINGER);
+ dev1->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- psmouse->dev.evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
- input_set_abs_params(&psmouse->dev, ABS_X, 0, 1023, 0, 0);
- input_set_abs_params(&psmouse->dev, ABS_Y, 0, 767, 0, 0);
- input_set_abs_params(&psmouse->dev, ABS_PRESSURE, 0, 127, 0, 0);
+ dev1->evbit[LONG(EV_ABS)] |= BIT(EV_ABS);
+ input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
+ input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
if (priv->i->flags & ALPS_WHEEL) {
- psmouse->dev.evbit[LONG(EV_REL)] |= BIT(EV_REL);
- psmouse->dev.relbit[LONG(REL_WHEEL)] |= BIT(REL_WHEEL);
+ dev1->evbit[LONG(EV_REL)] |= BIT(EV_REL);
+ dev1->relbit[LONG(REL_WHEEL)] |= BIT(REL_WHEEL);
}
if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
- psmouse->dev.keybit[LONG(BTN_FORWARD)] |= BIT(BTN_FORWARD);
- psmouse->dev.keybit[LONG(BTN_BACK)] |= BIT(BTN_BACK);
+ dev1->keybit[LONG(BTN_FORWARD)] |= BIT(BTN_FORWARD);
+ dev1->keybit[LONG(BTN_BACK)] |= BIT(BTN_BACK);
}
sprintf(priv->phys, "%s/input1", psmouse->ps2dev.serio->phys);
- priv->dev2.phys = priv->phys;
- priv->dev2.name = (priv->i->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
- priv->dev2.id.bustype = BUS_I8042;
- priv->dev2.id.vendor = 0x0002;
- priv->dev2.id.product = PSMOUSE_ALPS;
- priv->dev2.id.version = 0x0000;
+ dev2->phys = priv->phys;
+ dev2->name = (priv->i->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
+ dev2->id.bustype = BUS_I8042;
+ dev2->id.vendor = 0x0002;
+ dev2->id.product = PSMOUSE_ALPS;
+ dev2->id.version = 0x0000;
- priv->dev2.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- priv->dev2.relbit[LONG(REL_X)] |= BIT(REL_X) | BIT(REL_Y);
- priv->dev2.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ dev2->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ dev2->relbit[LONG(REL_X)] |= BIT(REL_X) | BIT(REL_Y);
+ dev2->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- input_register_device(&priv->dev2);
-
- printk(KERN_INFO "input: %s on %s\n", priv->dev2.name, psmouse->ps2dev.serio->phys);
+ input_register_device(priv->dev2);
psmouse->protocol_handler = alps_process_byte;
psmouse->disconnect = alps_disconnect;
@@ -455,6 +457,7 @@
return 0;
init_fail:
+ input_free_device(dev2);
kfree(priv);
return -1;
}
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index aba103d..e428f8d 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -22,7 +22,7 @@
};
struct alps_data {
- struct input_dev dev2; /* Relative device */
+ struct input_dev *dev2; /* Relative device */
char name[32]; /* Name */
char phys[32]; /* Phys */
struct alps_model_info *i; /* Info */
diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c
index e994849..d13d4c8 100644
--- a/drivers/input/mouse/amimouse.c
+++ b/drivers/input/mouse/amimouse.c
@@ -34,10 +34,7 @@
MODULE_LICENSE("GPL");
static int amimouse_lastx, amimouse_lasty;
-static struct input_dev amimouse_dev;
-
-static char *amimouse_name = "Amiga mouse";
-static char *amimouse_phys = "amimouse/input0";
+static struct input_dev *amimouse_dev;
static irqreturn_t amimouse_interrupt(int irq, void *dummy, struct pt_regs *fp)
{
@@ -62,16 +59,16 @@
potgor = custom.potgor;
- input_regs(&amimouse_dev, fp);
+ input_regs(amimouse_dev, fp);
- input_report_rel(&amimouse_dev, REL_X, dx);
- input_report_rel(&amimouse_dev, REL_Y, dy);
+ input_report_rel(amimouse_dev, REL_X, dx);
+ input_report_rel(amimouse_dev, REL_Y, dy);
- input_report_key(&amimouse_dev, BTN_LEFT, ciaa.pra & 0x40);
- input_report_key(&amimouse_dev, BTN_MIDDLE, potgor & 0x0100);
- input_report_key(&amimouse_dev, BTN_RIGHT, potgor & 0x0400);
+ input_report_key(amimouse_dev, BTN_LEFT, ciaa.pra & 0x40);
+ input_report_key(amimouse_dev, BTN_MIDDLE, potgor & 0x0100);
+ input_report_key(amimouse_dev, BTN_RIGHT, potgor & 0x0400);
- input_sync(&amimouse_dev);
+ input_sync(amimouse_dev);
return IRQ_HANDLED;
}
@@ -103,28 +100,30 @@
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE))
return -ENODEV;
- amimouse_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- amimouse_dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
- amimouse_dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- amimouse_dev.open = amimouse_open;
- amimouse_dev.close = amimouse_close;
+ if (!(amimouse_dev = input_allocate_device()))
+ return -ENOMEM;
- amimouse_dev.name = amimouse_name;
- amimouse_dev.phys = amimouse_phys;
- amimouse_dev.id.bustype = BUS_AMIGA;
- amimouse_dev.id.vendor = 0x0001;
- amimouse_dev.id.product = 0x0002;
- amimouse_dev.id.version = 0x0100;
+ amimouse_dev->name = "Amiga mouse";
+ amimouse_dev->phys = "amimouse/input0";
+ amimouse_dev->id.bustype = BUS_AMIGA;
+ amimouse_dev->id.vendor = 0x0001;
+ amimouse_dev->id.product = 0x0002;
+ amimouse_dev->id.version = 0x0100;
- input_register_device(&amimouse_dev);
+ amimouse_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ amimouse_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ amimouse_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ amimouse_dev->open = amimouse_open;
+ amimouse_dev->close = amimouse_close;
- printk(KERN_INFO "input: %s at joy0dat\n", amimouse_name);
+ input_register_device(amimouse_dev);
+
return 0;
}
static void __exit amimouse_exit(void)
{
- input_unregister_device(&amimouse_dev);
+ input_unregister_device(amimouse_dev);
}
module_init(amimouse_init);
diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c
index bc22849..c2bf2ed 100644
--- a/drivers/input/mouse/hil_ptr.c
+++ b/drivers/input/mouse/hil_ptr.c
@@ -196,7 +196,7 @@
hil_packet packet;
int idx;
- ptr = (struct hil_ptr *)serio->private;
+ ptr = serio_get_drvdata(serio);
if (ptr == NULL) {
BUG();
return IRQ_HANDLED;
@@ -227,7 +227,7 @@
{
struct hil_ptr *ptr;
- ptr = (struct hil_ptr *)serio->private;
+ ptr = serio_get_drvdata(serio);
if (ptr == NULL) {
BUG();
return;
@@ -238,21 +238,19 @@
kfree(ptr);
}
-static void hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
+static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
{
struct hil_ptr *ptr;
char *txt;
unsigned int i, naxsets, btntype;
uint8_t did, *idd;
- if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return;
-
- if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return;
+ if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return -ENOMEM;
memset(ptr, 0, sizeof(struct hil_ptr));
if (serio_open(serio, driver)) goto bail0;
- serio->private = ptr;
+ serio_set_drvdata(serio, ptr);
ptr->serio = serio;
ptr->dev.private = ptr;
@@ -380,23 +378,34 @@
(btntype == BTN_MOUSE) ? "HIL mouse":"HIL tablet or touchpad",
did);
- return;
+ return 0;
bail1:
serio_close(serio);
bail0:
kfree(ptr);
- return;
+ serio_set_drvdata(serio, NULL);
+ return -ENODEV;
}
+static struct serio_device_id hil_ptr_ids[] = {
+ {
+ .type = SERIO_HIL_MLC,
+ .proto = SERIO_HIL,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
static struct serio_driver hil_ptr_serio_driver = {
.driver = {
.name = "hil_ptr",
},
.description = "HP HIL mouse/tablet driver",
- .connect = hil_ptr_connect,
- .disconnect = hil_ptr_disconnect,
- .interrupt = hil_ptr_interrupt
+ .id_table = hil_ptr_ids,
+ .connect = hil_ptr_connect,
+ .disconnect = hil_ptr_disconnect,
+ .interrupt = hil_ptr_interrupt
};
static int __init hil_ptr_init(void)
diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c
index 1f62c01..afc66f5 100644
--- a/drivers/input/mouse/inport.c
+++ b/drivers/input/mouse/inport.c
@@ -87,7 +87,36 @@
__obsolete_setup("inport_irq=");
-static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static struct input_dev *inport_dev;
+
+static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned char buttons;
+
+ outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+ outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+ input_regs(inport_dev, regs);
+
+ outb(INPORT_REG_X, INPORT_CONTROL_PORT);
+ input_report_rel(inport_dev, REL_X, inb(INPORT_DATA_PORT));
+
+ outb(INPORT_REG_Y, INPORT_CONTROL_PORT);
+ input_report_rel(inport_dev, REL_Y, inb(INPORT_DATA_PORT));
+
+ outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT);
+ buttons = inb(INPORT_DATA_PORT);
+
+ input_report_key(inport_dev, BTN_MIDDLE, buttons & 1);
+ input_report_key(inport_dev, BTN_LEFT, buttons & 2);
+ input_report_key(inport_dev, BTN_RIGHT, buttons & 4);
+
+ outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
+ outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
+
+ input_sync(inport_dev);
+ return IRQ_HANDLED;
+}
static int inport_open(struct input_dev *dev)
{
@@ -106,54 +135,9 @@
free_irq(inport_irq, NULL);
}
-static struct input_dev inport_dev = {
- .evbit = { BIT(EV_KEY) | BIT(EV_REL) },
- .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
- .relbit = { BIT(REL_X) | BIT(REL_Y) },
- .open = inport_open,
- .close = inport_close,
- .name = INPORT_NAME,
- .phys = "isa023c/input0",
- .id = {
- .bustype = BUS_ISA,
- .vendor = INPORT_VENDOR,
- .product = 0x0001,
- .version = 0x0100,
- },
-};
-
-static irqreturn_t inport_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- unsigned char buttons;
-
- outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
- outb(INPORT_MODE_HOLD | INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
-
- input_regs(&inport_dev, regs);
-
- outb(INPORT_REG_X, INPORT_CONTROL_PORT);
- input_report_rel(&inport_dev, REL_X, inb(INPORT_DATA_PORT));
-
- outb(INPORT_REG_Y, INPORT_CONTROL_PORT);
- input_report_rel(&inport_dev, REL_Y, inb(INPORT_DATA_PORT));
-
- outb(INPORT_REG_BTNS, INPORT_CONTROL_PORT);
- buttons = inb(INPORT_DATA_PORT);
-
- input_report_key(&inport_dev, BTN_MIDDLE, buttons & 1);
- input_report_key(&inport_dev, BTN_LEFT, buttons & 2);
- input_report_key(&inport_dev, BTN_RIGHT, buttons & 4);
-
- outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
- outb(INPORT_MODE_IRQ | INPORT_MODE_BASE, INPORT_DATA_PORT);
-
- input_sync(&inport_dev);
- return IRQ_HANDLED;
-}
-
static int __init inport_init(void)
{
- unsigned char a,b,c;
+ unsigned char a, b, c;
if (!request_region(INPORT_BASE, INPORT_EXTENT, "inport")) {
printk(KERN_ERR "inport.c: Can't allocate ports at %#x\n", INPORT_BASE);
@@ -163,26 +147,44 @@
a = inb(INPORT_SIGNATURE_PORT);
b = inb(INPORT_SIGNATURE_PORT);
c = inb(INPORT_SIGNATURE_PORT);
- if (( a == b ) || ( a != c )) {
+ if (a == b || a != c) {
release_region(INPORT_BASE, INPORT_EXTENT);
printk(KERN_ERR "inport.c: Didn't find InPort mouse at %#x\n", INPORT_BASE);
return -ENODEV;
}
+ if (!(inport_dev = input_allocate_device())) {
+ printk(KERN_ERR "inport.c: Not enough memory for input device\n");
+ release_region(INPORT_BASE, INPORT_EXTENT);
+ return -ENOMEM;
+ }
+
+ inport_dev->name = INPORT_NAME;
+ inport_dev->phys = "isa023c/input0";
+ inport_dev->id.bustype = BUS_ISA;
+ inport_dev->id.vendor = INPORT_VENDOR;
+ inport_dev->id.product = 0x0001;
+ inport_dev->id.version = 0x0100;
+
+ inport_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ inport_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ inport_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+
+ inport_dev->open = inport_open;
+ inport_dev->close = inport_close;
+
outb(INPORT_RESET, INPORT_CONTROL_PORT);
outb(INPORT_REG_MODE, INPORT_CONTROL_PORT);
outb(INPORT_MODE_BASE, INPORT_DATA_PORT);
- input_register_device(&inport_dev);
-
- printk(KERN_INFO "input: " INPORT_NAME " at %#x irq %d\n", INPORT_BASE, inport_irq);
+ input_register_device(inport_dev);
return 0;
}
static void __exit inport_exit(void)
{
- input_unregister_device(&inport_dev);
+ input_unregister_device(inport_dev);
release_region(INPORT_BASE, INPORT_EXTENT);
}
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index bd9df9b..5599142 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -34,7 +34,7 @@
static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
{
unsigned char *packet = psmouse->packet;
- struct input_dev *dev = &psmouse->dev;
+ struct input_dev *dev = psmouse->dev;
if (psmouse->pktcnt != 3)
return PSMOUSE_GOOD_DATA;
@@ -113,15 +113,17 @@
int lifebook_init(struct psmouse *psmouse)
{
+ struct input_dev *input_dev = psmouse->dev;
+
if (lifebook_absolute_mode(psmouse))
return -1;
- psmouse->dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL);
- psmouse->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- psmouse->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
- input_set_abs_params(&psmouse->dev, ABS_X, 0, 1024, 0, 0);
- input_set_abs_params(&psmouse->dev, ABS_Y, 0, 1024, 0, 0);
+ input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ input_set_abs_params(input_dev, ABS_X, 0, 1024, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 1024, 0, 0);
psmouse->protocol_handler = lifebook_process_byte;
psmouse->set_resolution = lifebook_set_resolution;
diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c
index 8b52431..9c7ce38 100644
--- a/drivers/input/mouse/logibm.c
+++ b/drivers/input/mouse/logibm.c
@@ -77,39 +77,7 @@
__obsolete_setup("logibm_irq=");
-static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-
-static int logibm_open(struct input_dev *dev)
-{
- if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) {
- printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq);
- return -EBUSY;
- }
- outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
- return 0;
-}
-
-static void logibm_close(struct input_dev *dev)
-{
- outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
- free_irq(logibm_irq, NULL);
-}
-
-static struct input_dev logibm_dev = {
- .evbit = { BIT(EV_KEY) | BIT(EV_REL) },
- .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
- .relbit = { BIT(REL_X) | BIT(REL_Y) },
- .open = logibm_open,
- .close = logibm_close,
- .name = "Logitech bus mouse",
- .phys = "isa023c/input0",
- .id = {
- .bustype = BUS_ISA,
- .vendor = 0x0003,
- .product = 0x0001,
- .version = 0x0100,
- },
-};
+static struct input_dev *logibm_dev;
static irqreturn_t logibm_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
@@ -127,18 +95,34 @@
dy |= (buttons & 0xf) << 4;
buttons = ~buttons >> 5;
- input_regs(&logibm_dev, regs);
- input_report_rel(&logibm_dev, REL_X, dx);
- input_report_rel(&logibm_dev, REL_Y, dy);
- input_report_key(&logibm_dev, BTN_RIGHT, buttons & 1);
- input_report_key(&logibm_dev, BTN_MIDDLE, buttons & 2);
- input_report_key(&logibm_dev, BTN_LEFT, buttons & 4);
- input_sync(&logibm_dev);
+ input_regs(logibm_dev, regs);
+ input_report_rel(logibm_dev, REL_X, dx);
+ input_report_rel(logibm_dev, REL_Y, dy);
+ input_report_key(logibm_dev, BTN_RIGHT, buttons & 1);
+ input_report_key(logibm_dev, BTN_MIDDLE, buttons & 2);
+ input_report_key(logibm_dev, BTN_LEFT, buttons & 4);
+ input_sync(logibm_dev);
outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
return IRQ_HANDLED;
}
+static int logibm_open(struct input_dev *dev)
+{
+ if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) {
+ printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq);
+ return -EBUSY;
+ }
+ outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT);
+ return 0;
+}
+
+static void logibm_close(struct input_dev *dev)
+{
+ outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
+ free_irq(logibm_irq, NULL);
+}
+
static int __init logibm_init(void)
{
if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) {
@@ -159,16 +143,34 @@
outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT);
outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT);
- input_register_device(&logibm_dev);
+ if (!(logibm_dev = input_allocate_device())) {
+ printk(KERN_ERR "logibm.c: Not enough memory for input device\n");
+ release_region(LOGIBM_BASE, LOGIBM_EXTENT);
+ return -ENOMEM;
+ }
- printk(KERN_INFO "input: Logitech bus mouse at %#x irq %d\n", LOGIBM_BASE, logibm_irq);
+ logibm_dev->name = "Logitech bus mouse";
+ logibm_dev->phys = "isa023c/input0";
+ logibm_dev->id.bustype = BUS_ISA;
+ logibm_dev->id.vendor = 0x0003;
+ logibm_dev->id.product = 0x0001;
+ logibm_dev->id.version = 0x0100;
+
+ logibm_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ logibm_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ logibm_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+
+ logibm_dev->open = logibm_open;
+ logibm_dev->close = logibm_close;
+
+ input_register_device(logibm_dev);
return 0;
}
static void __exit logibm_exit(void)
{
- input_unregister_device(&logibm_dev);
+ input_unregister_device(logibm_dev);
release_region(LOGIBM_BASE, LOGIBM_EXTENT);
}
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 7df9652..0f69ff4 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -40,7 +40,7 @@
static psmouse_ret_t ps2pp_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
{
- struct input_dev *dev = &psmouse->dev;
+ struct input_dev *dev = psmouse->dev;
unsigned char *packet = psmouse->packet;
if (psmouse->pktcnt < 3)
@@ -257,25 +257,27 @@
static void ps2pp_set_model_properties(struct psmouse *psmouse, struct ps2pp_info *model_info,
int using_ps2pp)
{
+ struct input_dev *input_dev = psmouse->dev;
+
if (model_info->features & PS2PP_SIDE_BTN)
- set_bit(BTN_SIDE, psmouse->dev.keybit);
+ set_bit(BTN_SIDE, input_dev->keybit);
if (model_info->features & PS2PP_EXTRA_BTN)
- set_bit(BTN_EXTRA, psmouse->dev.keybit);
+ set_bit(BTN_EXTRA, input_dev->keybit);
if (model_info->features & PS2PP_TASK_BTN)
- set_bit(BTN_TASK, psmouse->dev.keybit);
+ set_bit(BTN_TASK, input_dev->keybit);
if (model_info->features & PS2PP_NAV_BTN) {
- set_bit(BTN_FORWARD, psmouse->dev.keybit);
- set_bit(BTN_BACK, psmouse->dev.keybit);
+ set_bit(BTN_FORWARD, input_dev->keybit);
+ set_bit(BTN_BACK, input_dev->keybit);
}
if (model_info->features & PS2PP_WHEEL)
- set_bit(REL_WHEEL, psmouse->dev.relbit);
+ set_bit(REL_WHEEL, input_dev->relbit);
if (model_info->features & PS2PP_HWHEEL)
- set_bit(REL_HWHEEL, psmouse->dev.relbit);
+ set_bit(REL_HWHEEL, input_dev->relbit);
switch (model_info->kind) {
case PS2PP_KIND_WHEEL:
@@ -387,7 +389,7 @@
}
if (buttons < 3)
- clear_bit(BTN_MIDDLE, psmouse->dev.keybit);
+ clear_bit(BTN_MIDDLE, psmouse->dev->keybit);
if (model_info)
ps2pp_set_model_properties(psmouse, model_info, use_ps2pp);
diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c
index e90c60c..b5b34fe 100644
--- a/drivers/input/mouse/maplemouse.c
+++ b/drivers/input/mouse/maplemouse.c
@@ -41,13 +41,12 @@
unsigned long data = be32_to_cpu(dev->devinfo.function_data[0]);
struct input_dev *input_dev;
- if (!(input_dev = kmalloc(sizeof(struct input_dev), GFP_KERNEL)))
- return -1;
+ dev->private_data = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
dev->private_data = input_dev;
- memset(input_dev, 0, sizeof(struct dc_mouse));
- init_input_dev(input_dev);
input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL);
@@ -59,8 +58,6 @@
maple_getcond_callback(dev, dc_mouse_callback, 1, MAPLE_FUNC_MOUSE);
- printk(KERN_INFO "input: mouse(0x%lx): %s\n", data, input_dev->name);
-
return 0;
}
@@ -70,7 +67,6 @@
struct input_dev *input_dev = dev->private_data;
input_unregister_device(input_dev);
- kfree(input_dev);
}
diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c
index 93393d5..d284ea7 100644
--- a/drivers/input/mouse/pc110pad.c
+++ b/drivers/input/mouse/pc110pad.c
@@ -53,13 +53,10 @@
static int pc110pad_irq = 10;
static int pc110pad_io = 0x15e0;
-static struct input_dev pc110pad_dev;
+static struct input_dev *pc110pad_dev;
static int pc110pad_data[3];
static int pc110pad_count;
-static char *pc110pad_name = "IBM PC110 TouchPad";
-static char *pc110pad_phys = "isa15e0/input0";
-
static irqreturn_t pc110pad_interrupt(int irq, void *ptr, struct pt_regs *regs)
{
int value = inb_p(pc110pad_io);
@@ -74,14 +71,14 @@
if (pc110pad_count < 3)
return IRQ_HANDLED;
- input_regs(&pc110pad_dev, regs);
- input_report_key(&pc110pad_dev, BTN_TOUCH,
+ input_regs(pc110pad_dev, regs);
+ input_report_key(pc110pad_dev, BTN_TOUCH,
pc110pad_data[0] & 0x01);
- input_report_abs(&pc110pad_dev, ABS_X,
+ input_report_abs(pc110pad_dev, ABS_X,
pc110pad_data[1] | ((pc110pad_data[0] << 3) & 0x80) | ((pc110pad_data[0] << 1) & 0x100));
- input_report_abs(&pc110pad_dev, ABS_Y,
+ input_report_abs(pc110pad_dev, ABS_Y,
pc110pad_data[2] | ((pc110pad_data[0] << 4) & 0x80));
- input_sync(&pc110pad_dev);
+ input_sync(pc110pad_dev);
pc110pad_count = 0;
return IRQ_HANDLED;
@@ -94,9 +91,9 @@
static int pc110pad_open(struct input_dev *dev)
{
- pc110pad_interrupt(0,NULL,NULL);
- pc110pad_interrupt(0,NULL,NULL);
- pc110pad_interrupt(0,NULL,NULL);
+ pc110pad_interrupt(0, NULL, NULL);
+ pc110pad_interrupt(0, NULL, NULL);
+ pc110pad_interrupt(0, NULL, NULL);
outb(PC110PAD_ON, pc110pad_io + 2);
pc110pad_count = 0;
@@ -127,45 +124,46 @@
outb(PC110PAD_OFF, pc110pad_io + 2);
- if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", NULL))
- {
+ if (request_irq(pc110pad_irq, pc110pad_interrupt, 0, "pc110pad", NULL)) {
release_region(pc110pad_io, 4);
printk(KERN_ERR "pc110pad: Unable to get irq %d.\n", pc110pad_irq);
return -EBUSY;
}
- pc110pad_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- pc110pad_dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
- pc110pad_dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ if (!(pc110pad_dev = input_allocate_device())) {
+ free_irq(pc110pad_irq, NULL);
+ release_region(pc110pad_io, 4);
+ printk(KERN_ERR "pc110pad: Not enough memory.\n");
+ return -ENOMEM;
+ }
- pc110pad_dev.absmax[ABS_X] = 0x1ff;
- pc110pad_dev.absmax[ABS_Y] = 0x0ff;
+ pc110pad_dev->name = "IBM PC110 TouchPad";
+ pc110pad_dev->phys = "isa15e0/input0";
+ pc110pad_dev->id.bustype = BUS_ISA;
+ pc110pad_dev->id.vendor = 0x0003;
+ pc110pad_dev->id.product = 0x0001;
+ pc110pad_dev->id.version = 0x0100;
- pc110pad_dev.open = pc110pad_open;
- pc110pad_dev.close = pc110pad_close;
+ pc110pad_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ pc110pad_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+ pc110pad_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- pc110pad_dev.name = pc110pad_name;
- pc110pad_dev.phys = pc110pad_phys;
- pc110pad_dev.id.bustype = BUS_ISA;
- pc110pad_dev.id.vendor = 0x0003;
- pc110pad_dev.id.product = 0x0001;
- pc110pad_dev.id.version = 0x0100;
+ pc110pad_dev->absmax[ABS_X] = 0x1ff;
+ pc110pad_dev->absmax[ABS_Y] = 0x0ff;
- input_register_device(&pc110pad_dev);
+ pc110pad_dev->open = pc110pad_open;
+ pc110pad_dev->close = pc110pad_close;
- printk(KERN_INFO "input: %s at %#x irq %d\n",
- pc110pad_name, pc110pad_io, pc110pad_irq);
+ input_register_device(pc110pad_dev);
return 0;
}
static void __exit pc110pad_exit(void)
{
- input_unregister_device(&pc110pad_dev);
-
outb(PC110PAD_OFF, pc110pad_io + 2);
-
free_irq(pc110pad_irq, NULL);
+ input_unregister_device(pc110pad_dev);
release_region(pc110pad_io, 4);
}
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index af24313..6ee9999 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -114,7 +114,7 @@
static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
{
- struct input_dev *dev = &psmouse->dev;
+ struct input_dev *dev = psmouse->dev;
unsigned char *packet = psmouse->packet;
if (psmouse->pktcnt < psmouse->pktsize)
@@ -333,12 +333,11 @@
return -1;
if (set_properties) {
- set_bit(BTN_EXTRA, psmouse->dev.keybit);
- set_bit(BTN_SIDE, psmouse->dev.keybit);
- set_bit(REL_WHEEL, psmouse->dev.relbit);
+ set_bit(BTN_EXTRA, psmouse->dev->keybit);
+ set_bit(BTN_SIDE, psmouse->dev->keybit);
+ set_bit(REL_WHEEL, psmouse->dev->relbit);
psmouse->vendor = "Genius";
- psmouse->name = "Wheel Mouse";
psmouse->pktsize = 4;
}
@@ -365,8 +364,8 @@
return -1;
if (set_properties) {
- set_bit(BTN_MIDDLE, psmouse->dev.keybit);
- set_bit(REL_WHEEL, psmouse->dev.relbit);
+ set_bit(BTN_MIDDLE, psmouse->dev->keybit);
+ set_bit(REL_WHEEL, psmouse->dev->relbit);
if (!psmouse->vendor) psmouse->vendor = "Generic";
if (!psmouse->name) psmouse->name = "Wheel Mouse";
@@ -398,10 +397,10 @@
return -1;
if (set_properties) {
- set_bit(BTN_MIDDLE, psmouse->dev.keybit);
- set_bit(REL_WHEEL, psmouse->dev.relbit);
- set_bit(BTN_SIDE, psmouse->dev.keybit);
- set_bit(BTN_EXTRA, psmouse->dev.keybit);
+ set_bit(BTN_MIDDLE, psmouse->dev->keybit);
+ set_bit(REL_WHEEL, psmouse->dev->relbit);
+ set_bit(BTN_SIDE, psmouse->dev->keybit);
+ set_bit(BTN_EXTRA, psmouse->dev->keybit);
if (!psmouse->vendor) psmouse->vendor = "Generic";
if (!psmouse->name) psmouse->name = "Explorer Mouse";
@@ -433,7 +432,7 @@
return -1;
if (set_properties) {
- set_bit(BTN_EXTRA, psmouse->dev.keybit);
+ set_bit(BTN_EXTRA, psmouse->dev->keybit);
psmouse->vendor = "Kensington";
psmouse->name = "ThinkingMouse";
@@ -839,9 +838,9 @@
psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- input_unregister_device(&psmouse->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(psmouse->dev);
kfree(psmouse);
if (parent)
@@ -852,16 +851,14 @@
static int psmouse_switch_protocol(struct psmouse *psmouse, struct psmouse_protocol *proto)
{
- memset(&psmouse->dev, 0, sizeof(struct input_dev));
+ struct input_dev *input_dev = psmouse->dev;
- init_input_dev(&psmouse->dev);
+ input_dev->private = psmouse;
+ input_dev->cdev.dev = &psmouse->ps2dev.serio->dev;
- psmouse->dev.private = psmouse;
- psmouse->dev.dev = &psmouse->ps2dev.serio->dev;
-
- psmouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- psmouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
psmouse->set_rate = psmouse_set_rate;
psmouse->set_resolution = psmouse_set_resolution;
@@ -883,12 +880,12 @@
sprintf(psmouse->devname, "%s %s %s",
psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name);
- psmouse->dev.name = psmouse->devname;
- psmouse->dev.phys = psmouse->phys;
- psmouse->dev.id.bustype = BUS_I8042;
- psmouse->dev.id.vendor = 0x0002;
- psmouse->dev.id.product = psmouse->type;
- psmouse->dev.id.version = psmouse->model;
+ input_dev->name = psmouse->devname;
+ input_dev->phys = psmouse->phys;
+ input_dev->id.bustype = BUS_I8042;
+ input_dev->id.vendor = 0x0002;
+ input_dev->id.product = psmouse->type;
+ input_dev->id.version = psmouse->model;
return 0;
}
@@ -900,7 +897,8 @@
static int psmouse_connect(struct serio *serio, struct serio_driver *drv)
{
struct psmouse *psmouse, *parent = NULL;
- int retval;
+ struct input_dev *input_dev;
+ int retval = -ENOMEM;
down(&psmouse_sem);
@@ -913,12 +911,13 @@
psmouse_deactivate(parent);
}
- if (!(psmouse = kzalloc(sizeof(struct psmouse), GFP_KERNEL))) {
- retval = -ENOMEM;
+ psmouse = kzalloc(sizeof(struct psmouse), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!psmouse || !input_dev)
goto out;
- }
ps2_init(&psmouse->ps2dev, serio);
+ psmouse->dev = input_dev;
sprintf(psmouse->phys, "%s/input0", serio->phys);
psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
@@ -926,16 +925,11 @@
serio_set_drvdata(serio, psmouse);
retval = serio_open(serio, drv);
- if (retval) {
- serio_set_drvdata(serio, NULL);
- kfree(psmouse);
+ if (retval)
goto out;
- }
if (psmouse_probe(psmouse) < 0) {
serio_close(serio);
- serio_set_drvdata(serio, NULL);
- kfree(psmouse);
retval = -ENODEV;
goto out;
}
@@ -947,13 +941,11 @@
psmouse_switch_protocol(psmouse, NULL);
- input_register_device(&psmouse->dev);
- printk(KERN_INFO "input: %s on %s\n", psmouse->devname, serio->phys);
-
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
-
psmouse_initialize(psmouse);
+ input_register_device(psmouse->dev);
+
if (parent && parent->pt_activate)
parent->pt_activate(parent);
@@ -964,6 +956,12 @@
retval = 0;
out:
+ if (retval) {
+ serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(psmouse);
+ }
+
/* If this is a pass-through port the parent needs to be re-activated */
if (parent)
psmouse_activate(parent);
@@ -1161,6 +1159,7 @@
{
struct serio *serio = psmouse->ps2dev.serio;
struct psmouse *parent = NULL;
+ struct input_dev *new_dev;
struct psmouse_protocol *proto;
int retry = 0;
@@ -1170,9 +1169,13 @@
if (psmouse->type == proto->type)
return count;
+ if (!(new_dev = input_allocate_device()))
+ return -ENOMEM;
+
while (serio->child) {
if (++retry > 3) {
printk(KERN_WARNING "psmouse: failed to destroy child port, protocol change aborted.\n");
+ input_free_device(new_dev);
return -EIO;
}
@@ -1182,11 +1185,15 @@
serio_pin_driver_uninterruptible(serio);
down(&psmouse_sem);
- if (serio->drv != &psmouse_drv)
+ if (serio->drv != &psmouse_drv) {
+ input_free_device(new_dev);
return -ENODEV;
+ }
- if (psmouse->type == proto->type)
+ if (psmouse->type == proto->type) {
+ input_free_device(new_dev);
return count; /* switched by other thread */
+ }
}
if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) {
@@ -1199,8 +1206,9 @@
psmouse->disconnect(psmouse);
psmouse_set_state(psmouse, PSMOUSE_IGNORE);
- input_unregister_device(&psmouse->dev);
+ input_unregister_device(psmouse->dev);
+ psmouse->dev = new_dev;
psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
if (psmouse_switch_protocol(psmouse, proto) < 0) {
@@ -1212,8 +1220,7 @@
psmouse_initialize(psmouse);
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
- input_register_device(&psmouse->dev);
- printk(KERN_INFO "input: %s on %s\n", psmouse->devname, serio->phys);
+ input_register_device(psmouse->dev);
if (parent && parent->pt_activate)
parent->pt_activate(parent);
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index 45d2bd7..7c4192b 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -36,7 +36,7 @@
struct psmouse {
void *private;
- struct input_dev dev;
+ struct input_dev *dev;
struct ps2dev ps2dev;
char *vendor;
char *name;
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c
index 8fe1212..09b6ffd 100644
--- a/drivers/input/mouse/rpcmouse.c
+++ b/drivers/input/mouse/rpcmouse.c
@@ -34,20 +34,7 @@
MODULE_LICENSE("GPL");
static short rpcmouse_lastx, rpcmouse_lasty;
-
-static struct input_dev rpcmouse_dev = {
- .evbit = { BIT(EV_KEY) | BIT(EV_REL) },
- .keybit = { [LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT) },
- .relbit = { BIT(REL_X) | BIT(REL_Y) },
- .name = "Acorn RiscPC Mouse",
- .phys = "rpcmouse/input0",
- .id = {
- .bustype = BUS_HOST,
- .vendor = 0x0005,
- .product = 0x0001,
- .version = 0x0100,
- },
-};
+static struct input_dev *rpcmouse_dev;
static irqreturn_t rpcmouse_irq(int irq, void *dev_id, struct pt_regs *regs)
{
@@ -78,29 +65,41 @@
return IRQ_HANDLED;
}
+
static int __init rpcmouse_init(void)
{
- init_input_dev(&rpcmouse_dev);
+ if (!(rpcmouse_dev = input_allocate_device()))
+ return -ENOMEM;
+
+ rpcmouse_dev->name = "Acorn RiscPC Mouse";
+ rpcmouse_dev->phys = "rpcmouse/input0";
+ rpcmouse_dev->id.bustype = BUS_HOST;
+ rpcmouse_dev->id.vendor = 0x0005;
+ rpcmouse_dev->id.product = 0x0001;
+ rpcmouse_dev->id.version = 0x0100;
+
+ rpcmouse_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ rpcmouse_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ rpcmouse_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
rpcmouse_lastx = (short) iomd_readl(IOMD_MOUSEX);
rpcmouse_lasty = (short) iomd_readl(IOMD_MOUSEY);
- if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, SA_SHIRQ, "rpcmouse", &rpcmouse_dev)) {
+ if (request_irq(IRQ_VSYNCPULSE, rpcmouse_irq, SA_SHIRQ, "rpcmouse", rpcmouse_dev)) {
printk(KERN_ERR "rpcmouse: unable to allocate VSYNC interrupt\n");
- return -1;
+ input_free_device(rpcmouse_dev);
+ return -EBUSY;
}
- input_register_device(&rpcmouse_dev);
-
- printk(KERN_INFO "input: Acorn RiscPC mouse\n");
+ input_register_device(rpcmouse_dev);
return 0;
}
static void __exit rpcmouse_exit(void)
{
- input_unregister_device(&rpcmouse_dev);
- free_irq(IRQ_VSYNCPULSE, &rpcmouse_dev);
+ free_irq(IRQ_VSYNCPULSE, rpcmouse_dev);
+ input_unregister_device(rpcmouse_dev);
}
module_init(rpcmouse_init);
diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c
index d12b93a..4bf58436 100644
--- a/drivers/input/mouse/sermouse.c
+++ b/drivers/input/mouse/sermouse.c
@@ -48,7 +48,7 @@
"Logitech MZ++ Mouse"};
struct sermouse {
- struct input_dev dev;
+ struct input_dev *dev;
signed char buf[8];
unsigned char count;
unsigned char type;
@@ -64,7 +64,7 @@
static void sermouse_process_msc(struct sermouse *sermouse, signed char data, struct pt_regs *regs)
{
- struct input_dev *dev = &sermouse->dev;
+ struct input_dev *dev = sermouse->dev;
signed char *buf = sermouse->buf;
input_regs(dev, regs);
@@ -107,7 +107,7 @@
static void sermouse_process_ms(struct sermouse *sermouse, signed char data, struct pt_regs *regs)
{
- struct input_dev *dev = &sermouse->dev;
+ struct input_dev *dev = sermouse->dev;
signed char *buf = sermouse->buf;
if (data & 0x40) sermouse->count = 0;
@@ -230,9 +230,9 @@
{
struct sermouse *sermouse = serio_get_drvdata(serio);
- input_unregister_device(&sermouse->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_unregister_device(sermouse->dev);
kfree(sermouse);
}
@@ -244,56 +244,52 @@
static int sermouse_connect(struct serio *serio, struct serio_driver *drv)
{
struct sermouse *sermouse;
- unsigned char c;
- int err;
+ struct input_dev *input_dev;
+ unsigned char c = serio->id.extra;
+ int err = -ENOMEM;
- if (!serio->id.proto || serio->id.proto > SERIO_MZPP)
- return -ENODEV;
+ sermouse = kzalloc(sizeof(struct sermouse), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!sermouse || !input_dev)
+ goto fail;
- if (!(sermouse = kmalloc(sizeof(struct sermouse), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(sermouse, 0, sizeof(struct sermouse));
-
- init_input_dev(&sermouse->dev);
- sermouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- sermouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
- sermouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
- sermouse->dev.private = sermouse;
-
- sermouse->type = serio->id.proto;
- c = serio->id.extra;
-
- if (c & 0x01) set_bit(BTN_MIDDLE, sermouse->dev.keybit);
- if (c & 0x02) set_bit(BTN_SIDE, sermouse->dev.keybit);
- if (c & 0x04) set_bit(BTN_EXTRA, sermouse->dev.keybit);
- if (c & 0x10) set_bit(REL_WHEEL, sermouse->dev.relbit);
- if (c & 0x20) set_bit(REL_HWHEEL, sermouse->dev.relbit);
-
+ sermouse->dev = input_dev;
sprintf(sermouse->phys, "%s/input0", serio->phys);
+ sermouse->type = serio->id.proto;
- sermouse->dev.name = sermouse_protocols[sermouse->type];
- sermouse->dev.phys = sermouse->phys;
- sermouse->dev.id.bustype = BUS_RS232;
- sermouse->dev.id.vendor = sermouse->type;
- sermouse->dev.id.product = c;
- sermouse->dev.id.version = 0x0100;
- sermouse->dev.dev = &serio->dev;
+ input_dev->name = sermouse_protocols[sermouse->type];
+ input_dev->phys = sermouse->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = sermouse->type;
+ input_dev->id.product = c;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+ input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ input_dev->private = sermouse;
+
+ if (c & 0x01) set_bit(BTN_MIDDLE, input_dev->keybit);
+ if (c & 0x02) set_bit(BTN_SIDE, input_dev->keybit);
+ if (c & 0x04) set_bit(BTN_EXTRA, input_dev->keybit);
+ if (c & 0x10) set_bit(REL_WHEEL, input_dev->relbit);
+ if (c & 0x20) set_bit(REL_HWHEEL, input_dev->relbit);
serio_set_drvdata(serio, sermouse);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(sermouse);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&sermouse->dev);
-
- printk(KERN_INFO "input: %s on %s\n", sermouse_protocols[sermouse->type], serio->phys);
+ input_register_device(sermouse->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(sermouse);
+ return err;
}
static struct serio_device_id sermouse_serio_ids[] = {
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 0293094..97cdfd6 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -342,7 +342,7 @@
*/
static void synaptics_process_packet(struct psmouse *psmouse)
{
- struct input_dev *dev = &psmouse->dev;
+ struct input_dev *dev = psmouse->dev;
struct synaptics_data *priv = psmouse->private;
struct synaptics_hw_state hw;
int num_fingers;
@@ -473,7 +473,7 @@
static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse, struct pt_regs *regs)
{
- struct input_dev *dev = &psmouse->dev;
+ struct input_dev *dev = psmouse->dev;
struct synaptics_data *priv = psmouse->private;
input_regs(dev, regs);
@@ -645,7 +645,7 @@
SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
priv->model_id, priv->capabilities, priv->ext_cap);
- set_input_params(&psmouse->dev, priv);
+ set_input_params(psmouse->dev, priv);
psmouse->protocol_handler = synaptics_process_byte;
psmouse->set_rate = synaptics_set_rate;
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index f024be9..36e9442 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -112,7 +112,7 @@
struct vsxxxaa {
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
#define BUFLEN 15 /* At least 5 is needed for a full tablet packet */
unsigned char buf[BUFLEN];
@@ -211,7 +211,7 @@
static void
vsxxxaa_handle_REL_packet (struct vsxxxaa *mouse, struct pt_regs *regs)
{
- struct input_dev *dev = &mouse->dev;
+ struct input_dev *dev = mouse->dev;
unsigned char *buf = mouse->buf;
int left, middle, right;
int dx, dy;
@@ -269,7 +269,7 @@
static void
vsxxxaa_handle_ABS_packet (struct vsxxxaa *mouse, struct pt_regs *regs)
{
- struct input_dev *dev = &mouse->dev;
+ struct input_dev *dev = mouse->dev;
unsigned char *buf = mouse->buf;
int left, middle, right, touch;
int x, y;
@@ -323,7 +323,7 @@
static void
vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse, struct pt_regs *regs)
{
- struct input_dev *dev = &mouse->dev;
+ struct input_dev *dev = mouse->dev;
unsigned char *buf = mouse->buf;
int left, middle, right;
unsigned char error;
@@ -483,9 +483,9 @@
{
struct vsxxxaa *mouse = serio_get_drvdata (serio);
- input_unregister_device (&mouse->dev);
serio_close (serio);
serio_set_drvdata (serio, NULL);
+ input_unregister_device (mouse->dev);
kfree (mouse);
}
@@ -493,61 +493,57 @@
vsxxxaa_connect (struct serio *serio, struct serio_driver *drv)
{
struct vsxxxaa *mouse;
- int err;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
- if (!(mouse = kmalloc (sizeof (struct vsxxxaa), GFP_KERNEL)))
- return -ENOMEM;
+ mouse = kzalloc (sizeof (struct vsxxxaa), GFP_KERNEL);
+ input_dev = input_allocate_device ();
+ if (!mouse || !input_dev)
+ goto fail;
- memset (mouse, 0, sizeof (struct vsxxxaa));
-
- init_input_dev (&mouse->dev);
- set_bit (EV_KEY, mouse->dev.evbit); /* We have buttons */
- set_bit (EV_REL, mouse->dev.evbit);
- set_bit (EV_ABS, mouse->dev.evbit);
- set_bit (BTN_LEFT, mouse->dev.keybit); /* We have 3 buttons */
- set_bit (BTN_MIDDLE, mouse->dev.keybit);
- set_bit (BTN_RIGHT, mouse->dev.keybit);
- set_bit (BTN_TOUCH, mouse->dev.keybit); /* ...and Tablet */
- set_bit (REL_X, mouse->dev.relbit);
- set_bit (REL_Y, mouse->dev.relbit);
- set_bit (ABS_X, mouse->dev.absbit);
- set_bit (ABS_Y, mouse->dev.absbit);
-
- mouse->dev.absmin[ABS_X] = 0;
- mouse->dev.absmax[ABS_X] = 1023;
- mouse->dev.absmin[ABS_Y] = 0;
- mouse->dev.absmax[ABS_Y] = 1023;
-
- mouse->dev.private = mouse;
-
+ mouse->dev = input_dev;
+ mouse->serio = serio;
sprintf (mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer");
sprintf (mouse->phys, "%s/input0", serio->phys);
- mouse->dev.name = mouse->name;
- mouse->dev.phys = mouse->phys;
- mouse->dev.id.bustype = BUS_RS232;
- mouse->dev.dev = &serio->dev;
- mouse->serio = serio;
+
+ input_dev->name = mouse->name;
+ input_dev->phys = mouse->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = mouse;
+
+ set_bit (EV_KEY, input_dev->evbit); /* We have buttons */
+ set_bit (EV_REL, input_dev->evbit);
+ set_bit (EV_ABS, input_dev->evbit);
+ set_bit (BTN_LEFT, input_dev->keybit); /* We have 3 buttons */
+ set_bit (BTN_MIDDLE, input_dev->keybit);
+ set_bit (BTN_RIGHT, input_dev->keybit);
+ set_bit (BTN_TOUCH, input_dev->keybit); /* ...and Tablet */
+ set_bit (REL_X, input_dev->relbit);
+ set_bit (REL_Y, input_dev->relbit);
+ input_set_abs_params (input_dev, ABS_X, 0, 1023, 0, 0);
+ input_set_abs_params (input_dev, ABS_Y, 0, 1023, 0, 0);
serio_set_drvdata (serio, mouse);
err = serio_open (serio, drv);
- if (err) {
- serio_set_drvdata (serio, NULL);
- kfree (mouse);
- return err;
- }
+ if (err)
+ goto fail;
/*
* Request selftest. Standard packet format and differential
* mode will be requested after the device ID'ed successfully.
*/
- mouse->serio->write (mouse->serio, 'T'); /* Test */
+ serio->write (serio, 'T'); /* Test */
- input_register_device (&mouse->dev);
-
- printk (KERN_INFO "input: %s on %s\n", mouse->name, mouse->phys);
+ input_register_device (input_dev);
return 0;
+
+ fail: serio_set_drvdata (serio, NULL);
+ input_free_device (input_dev);
+ kfree (mouse);
+ return err;
}
static struct serio_device_id vsxxaa_serio_ids[] = {
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index c6194a9..2d0af44 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -9,7 +9,7 @@
* the Free Software Foundation.
*/
-#define MOUSEDEV_MINOR_BASE 32
+#define MOUSEDEV_MINOR_BASE 32
#define MOUSEDEV_MINORS 32
#define MOUSEDEV_MIX 31
@@ -24,7 +24,6 @@
#include <linux/random.h>
#include <linux/major.h>
#include <linux/device.h>
-#include <linux/devfs_fs_kernel.h>
#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
#include <linux/miscdevice.h>
#endif
@@ -621,6 +620,7 @@
static struct input_handle *mousedev_connect(struct input_handler *handler, struct input_dev *dev, struct input_device_id *id)
{
struct mousedev *mousedev;
+ struct class_device *cdev;
int minor = 0;
for (minor = 0; minor < MOUSEDEV_MINORS && mousedev_table[minor]; minor++);
@@ -649,11 +649,13 @@
mousedev_table[minor] = mousedev;
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/mouse%d", minor);
- class_device_create(input_class,
+ cdev = class_device_create(&input_class, &dev->cdev,
MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor),
- dev->dev, "mouse%d", minor);
+ dev->cdev.dev, mousedev->name);
+
+ /* temporary symlink to keep userspace happy */
+ sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj,
+ mousedev->name);
return &mousedev->handle;
}
@@ -663,9 +665,9 @@
struct mousedev *mousedev = handle->private;
struct mousedev_list *list;
- class_device_destroy(input_class,
+ sysfs_remove_link(&input_class.subsys.kset.kobj, mousedev->name);
+ class_device_destroy(&input_class,
MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor));
- devfs_remove("input/mouse%d", mousedev->minor);
mousedev->exist = 0;
if (mousedev->open) {
@@ -738,9 +740,7 @@
mousedev_mix.exist = 1;
mousedev_mix.minor = MOUSEDEV_MIX;
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/mice");
- class_device_create(input_class,
+ class_device_create(&input_class, NULL,
MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice");
#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
@@ -759,8 +759,7 @@
if (psaux_registered)
misc_deregister(&psaux_mouse);
#endif
- devfs_remove("input/mice");
- class_device_destroy(input_class,
+ class_device_destroy(&input_class,
MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX));
input_unregister_handler(&mousedev_handler);
}
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index 897e4c1..a7b0de0 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -211,9 +211,6 @@
writeb(0xff, addr+GSC_RESET);
gscps2_flush(ps2port);
spin_unlock_irqrestore(&ps2port->lock, flags);
-
- /* enable it */
- gscps2_enable(ps2port, ENABLE);
}
static LIST_HEAD(ps2port_list);
@@ -307,6 +304,9 @@
gscps2_reset(ps2port);
+ /* enable it */
+ gscps2_enable(ps2port, ENABLE);
+
gscps2_interrupt(0, NULL, NULL);
return 0;
@@ -331,7 +331,7 @@
{
struct gscps2port *ps2port;
struct serio *serio;
- unsigned long hpa = dev->hpa;
+ unsigned long hpa = dev->hpa.start;
int ret;
if (!dev->irq)
@@ -370,8 +370,6 @@
serio->port_data = ps2port;
serio->dev.parent = &dev->dev;
- list_add_tail(&ps2port->node, &ps2port_list);
-
ret = -EBUSY;
if (request_irq(dev->irq, gscps2_interrupt, SA_SHIRQ, ps2port->port->name, ps2port))
goto fail_miserably;
@@ -396,15 +394,16 @@
serio_register_port(ps2port->port);
+ list_add_tail(&ps2port->node, &ps2port_list);
+
return 0;
fail:
free_irq(dev->irq, ps2port);
fail_miserably:
- list_del(&ps2port->node);
iounmap(ps2port->addr);
- release_mem_region(dev->hpa, GSC_STATUS + 4);
+ release_mem_region(dev->hpa.start, GSC_STATUS + 4);
fail_nomem:
kfree(ps2port);
@@ -444,7 +443,7 @@
};
static struct parisc_driver parisc_ps2_driver = {
- .name = "GSC PS2",
+ .name = "gsc_ps2",
.id_table = gscps2_device_tbl,
.probe = gscps2_probe,
.remove = gscps2_remove,
diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
index c243cb6f..5704204 100644
--- a/drivers/input/serio/hil_mlc.c
+++ b/drivers/input/serio/hil_mlc.c
@@ -801,7 +801,8 @@
struct hil_mlc_serio_map *map;
struct hil_mlc *mlc;
- if (serio->private != NULL) return -EBUSY;
+ if (serio_get_drvdata(serio) != NULL)
+ return -EBUSY;
map = serio->port_data;
if (map == NULL) {
@@ -832,11 +833,18 @@
return;
}
- serio->private = NULL;
+ serio_set_drvdata(serio, NULL);
serio->drv = NULL;
/* TODO wake up interruptable */
}
+static struct serio_device_id hil_mlc_serio_id = {
+ .type = SERIO_HIL_MLC,
+ .proto = SERIO_HIL,
+ .extra = SERIO_ANY,
+ .id = SERIO_ANY,
+};
+
int hil_mlc_register(hil_mlc *mlc) {
int i;
unsigned long flags;
@@ -867,7 +875,7 @@
mlc_serio = kmalloc(sizeof(*mlc_serio), GFP_KERNEL);
mlc->serio[i] = mlc_serio;
memset(mlc_serio, 0, sizeof(*mlc_serio));
- mlc_serio->type = SERIO_HIL | SERIO_HIL_MLC;
+ mlc_serio->id = hil_mlc_serio_id;
mlc_serio->write = hil_mlc_serio_write;
mlc_serio->open = hil_mlc_serio_open;
mlc_serio->close = hil_mlc_serio_close;
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 7629452..a10348b 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -764,7 +764,7 @@
static int __init hp_sdc_init_hppa(struct parisc_device *d);
static struct parisc_driver hp_sdc_driver = {
- .name = "HP SDC",
+ .name = "hp_sdc",
.id_table = hp_sdc_tbl,
.probe = hp_sdc_init_hppa,
};
@@ -875,9 +875,9 @@
hp_sdc.dev = d;
hp_sdc.irq = d->irq;
hp_sdc.nmi = d->aux_irq;
- hp_sdc.base_io = d->hpa;
- hp_sdc.data_io = d->hpa + 0x800;
- hp_sdc.status_io = d->hpa + 0x801;
+ hp_sdc.base_io = d->hpa.start;
+ hp_sdc.data_io = d->hpa.start + 0x800;
+ hp_sdc.status_io = d->hpa.start + 0x801;
return hp_sdc_init();
}
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 40d451c..4bc40f1 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -911,12 +911,10 @@
* Here we try to restore the original BIOS settings
*/
-static int i8042_suspend(struct device *dev, pm_message_t state, u32 level)
+static int i8042_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_DISABLE) {
- del_timer_sync(&i8042_timer);
- i8042_controller_reset();
- }
+ del_timer_sync(&i8042_timer);
+ i8042_controller_reset();
return 0;
}
@@ -926,13 +924,10 @@
* Here we try to reset everything back to a state in which suspended
*/
-static int i8042_resume(struct device *dev, u32 level)
+static int i8042_resume(struct device *dev)
{
int i;
- if (level != RESUME_ENABLE)
- return 0;
-
if (i8042_ctl_test())
return -1;
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 4c7fbe5..0ba3e65 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -41,8 +41,7 @@
};
struct corgi_ts {
- char phys[32];
- struct input_dev input;
+ struct input_dev *input;
struct timer_list timer;
struct ts_event tc;
int pendown;
@@ -182,14 +181,12 @@
if (!corgi_ts->tc.pressure && corgi_ts->pendown == 0)
return;
- if (regs)
- input_regs(&corgi_ts->input, regs);
-
- input_report_abs(&corgi_ts->input, ABS_X, corgi_ts->tc.x);
- input_report_abs(&corgi_ts->input, ABS_Y, corgi_ts->tc.y);
- input_report_abs(&corgi_ts->input, ABS_PRESSURE, corgi_ts->tc.pressure);
- input_report_key(&corgi_ts->input, BTN_TOUCH, (corgi_ts->pendown != 0));
- input_sync(&corgi_ts->input);
+ input_regs(corgi_ts->input, regs);
+ input_report_abs(corgi_ts->input, ABS_X, corgi_ts->tc.x);
+ input_report_abs(corgi_ts->input, ABS_Y, corgi_ts->tc.y);
+ input_report_abs(corgi_ts->input, ABS_PRESSURE, corgi_ts->tc.pressure);
+ input_report_key(corgi_ts->input, BTN_TOUCH, (corgi_ts->pendown != 0));
+ input_sync(corgi_ts->input);
}
static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer, struct pt_regs *regs)
@@ -234,34 +231,32 @@
}
#ifdef CONFIG_PM
-static int corgits_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int corgits_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- struct corgi_ts *corgi_ts = dev_get_drvdata(dev);
+ struct corgi_ts *corgi_ts = dev_get_drvdata(dev);
- if (corgi_ts->pendown) {
- del_timer_sync(&corgi_ts->timer);
- corgi_ts->tc.pressure = 0;
- new_data(corgi_ts, NULL);
- corgi_ts->pendown = 0;
- }
- corgi_ts->power_mode = PWR_MODE_SUSPEND;
-
- corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
+ if (corgi_ts->pendown) {
+ del_timer_sync(&corgi_ts->timer);
+ corgi_ts->tc.pressure = 0;
+ new_data(corgi_ts, NULL);
+ corgi_ts->pendown = 0;
}
+ corgi_ts->power_mode = PWR_MODE_SUSPEND;
+
+ corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
+
return 0;
}
-static int corgits_resume(struct device *dev, uint32_t level)
+static int corgits_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- struct corgi_ts *corgi_ts = dev_get_drvdata(dev);
+ struct corgi_ts *corgi_ts = dev_get_drvdata(dev);
- corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
- /* Enable Falling Edge */
- set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
- corgi_ts->power_mode = PWR_MODE_ACTIVE;
- }
+ corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
+ /* Enable Falling Edge */
+ set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
+ corgi_ts->power_mode = PWR_MODE_ACTIVE;
+
return 0;
}
#else
@@ -273,39 +268,44 @@
{
struct corgi_ts *corgi_ts;
struct platform_device *pdev = to_platform_device(dev);
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
- if (!(corgi_ts = kmalloc(sizeof(struct corgi_ts), GFP_KERNEL)))
- return -ENOMEM;
+ corgi_ts = kzalloc(sizeof(struct corgi_ts), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!corgi_ts || !input_dev)
+ goto fail;
dev_set_drvdata(dev, corgi_ts);
- memset(corgi_ts, 0, sizeof(struct corgi_ts));
-
corgi_ts->machinfo = dev->platform_data;
corgi_ts->irq_gpio = platform_get_irq(pdev, 0);
if (corgi_ts->irq_gpio < 0) {
- kfree(corgi_ts);
- return -ENODEV;
+ err = -ENODEV;
+ goto fail;
}
- init_input_dev(&corgi_ts->input);
- corgi_ts->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- corgi_ts->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- input_set_abs_params(&corgi_ts->input, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
- input_set_abs_params(&corgi_ts->input, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
- input_set_abs_params(&corgi_ts->input, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0);
+ corgi_ts->input = input_dev;
- strcpy(corgi_ts->phys, "corgits/input0");
+ init_timer(&corgi_ts->timer);
+ corgi_ts->timer.data = (unsigned long) corgi_ts;
+ corgi_ts->timer.function = corgi_ts_timer;
- corgi_ts->input.private = corgi_ts;
- corgi_ts->input.name = "Corgi Touchscreen";
- corgi_ts->input.dev = dev;
- corgi_ts->input.phys = corgi_ts->phys;
- corgi_ts->input.id.bustype = BUS_HOST;
- corgi_ts->input.id.vendor = 0x0001;
- corgi_ts->input.id.product = 0x0002;
- corgi_ts->input.id.version = 0x0100;
+ input_dev->name = "Corgi Touchscreen";
+ input_dev->phys = "corgits/input0";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0002;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = dev;
+ input_dev->private = corgi_ts;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, PRESSURE_MAX, 0, 0);
pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts->irq_gpio) | GPIO_IN);
@@ -319,25 +319,24 @@
corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
mdelay(5);
- init_timer(&corgi_ts->timer);
- corgi_ts->timer.data = (unsigned long) corgi_ts;
- corgi_ts->timer.function = corgi_ts_timer;
-
- input_register_device(&corgi_ts->input);
- corgi_ts->power_mode = PWR_MODE_ACTIVE;
-
if (request_irq(corgi_ts->irq_gpio, ts_interrupt, SA_INTERRUPT, "ts", corgi_ts)) {
- input_unregister_device(&corgi_ts->input);
- kfree(corgi_ts);
- return -EBUSY;
+ err = -EBUSY;
+ goto fail;
}
+ input_register_device(corgi_ts->input);
+
+ corgi_ts->power_mode = PWR_MODE_ACTIVE;
+
/* Enable Falling Edge */
set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING);
- printk(KERN_INFO "input: Corgi Touchscreen Registered\n");
-
return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(corgi_ts);
+ return err;
+
}
static int corgits_remove(struct device *dev)
@@ -347,7 +346,7 @@
free_irq(corgi_ts->irq_gpio, NULL);
del_timer_sync(&corgi_ts->timer);
corgi_ts->machinfo->put_hsync();
- input_unregister_device(&corgi_ts->input);
+ input_unregister_device(corgi_ts->input);
kfree(corgi_ts);
return 0;
}
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index 3cdc9ca..c86a2eb 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -36,14 +36,12 @@
#define ELO_MAX_LENGTH 10
-static char *elo_name = "Elo Serial TouchScreen";
-
/*
* Per-touchscreen data.
*/
struct elo {
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
int id;
int idx;
@@ -54,7 +52,7 @@
static void elo_process_data_10(struct elo* elo, unsigned char data, struct pt_regs *regs)
{
- struct input_dev *dev = &elo->dev;
+ struct input_dev *dev = elo->dev;
elo->csum += elo->data[elo->idx] = data;
@@ -80,7 +78,7 @@
input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]);
input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]);
input_report_abs(dev, ABS_PRESSURE, (elo->data[8] << 8) | elo->data[7]);
- input_report_key(dev, BTN_TOUCH, elo->data[2] & 3);
+ input_report_key(dev, BTN_TOUCH, elo->data[8] || elo->data[7]);
input_sync(dev);
}
elo->idx = 0;
@@ -91,7 +89,7 @@
static void elo_process_data_6(struct elo* elo, unsigned char data, struct pt_regs *regs)
{
- struct input_dev *dev = &elo->dev;
+ struct input_dev *dev = elo->dev;
elo->data[elo->idx] = data;
@@ -129,7 +127,7 @@
case 5:
if ((data & 0xf0) == 0) {
input_report_abs(dev, ABS_PRESSURE, elo->data[5]);
- input_report_key(dev, BTN_TOUCH, elo->data[5]);
+ input_report_key(dev, BTN_TOUCH, !!elo->data[5]);
}
input_sync(dev);
elo->idx = 0;
@@ -139,7 +137,7 @@
static void elo_process_data_3(struct elo* elo, unsigned char data, struct pt_regs *regs)
{
- struct input_dev *dev = &elo->dev;
+ struct input_dev *dev = elo->dev;
elo->data[elo->idx] = data;
@@ -191,7 +189,7 @@
{
struct elo* elo = serio_get_drvdata(serio);
- input_unregister_device(&elo->dev);
+ input_unregister_device(elo->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
kfree(elo);
@@ -206,67 +204,68 @@
static int elo_connect(struct serio *serio, struct serio_driver *drv)
{
struct elo *elo;
+ struct input_dev *input_dev;
int err;
- if (!(elo = kmalloc(sizeof(struct elo), GFP_KERNEL)))
- return -ENOMEM;
+ elo = kzalloc(sizeof(struct elo), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!elo || !input_dev) {
+ err = -ENOMEM;
+ goto fail;
+ }
- memset(elo, 0, sizeof(struct elo));
-
- init_input_dev(&elo->dev);
- elo->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- elo->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
+ elo->serio = serio;
elo->id = serio->id.id;
+ elo->dev = input_dev;
+ snprintf(elo->phys, sizeof(elo->phys), "%s/input0", serio->phys);
+
+ input_dev->private = elo;
+ input_dev->name = "Elo Serial TouchScreen";
+ input_dev->phys = elo->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_ELO;
+ input_dev->id.product = elo->id;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
switch (elo->id) {
case 0: /* 10-byte protocol */
- input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0);
- input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0);
- input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
break;
case 1: /* 6-byte protocol */
- input_set_abs_params(&elo->dev, ABS_PRESSURE, 0, 15, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0);
case 2: /* 4-byte protocol */
- input_set_abs_params(&elo->dev, ABS_X, 96, 4000, 0, 0);
- input_set_abs_params(&elo->dev, ABS_Y, 96, 4000, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0);
break;
case 3: /* 3-byte protocol */
- input_set_abs_params(&elo->dev, ABS_X, 0, 255, 0, 0);
- input_set_abs_params(&elo->dev, ABS_Y, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0);
break;
}
- elo->serio = serio;
-
- sprintf(elo->phys, "%s/input0", serio->phys);
-
- elo->dev.private = elo;
- elo->dev.name = elo_name;
- elo->dev.phys = elo->phys;
- elo->dev.id.bustype = BUS_RS232;
- elo->dev.id.vendor = SERIO_ELO;
- elo->dev.id.product = elo->id;
- elo->dev.id.version = 0x0100;
-
serio_set_drvdata(serio, elo);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(elo);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&elo->dev);
-
- printk(KERN_INFO "input: %s on %s\n", elo_name, serio->phys);
-
+ input_register_device(elo->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(elo);
+ return err;
}
/*
diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c
index 53a27e4..466da19 100644
--- a/drivers/input/touchscreen/gunze.c
+++ b/drivers/input/touchscreen/gunze.c
@@ -48,14 +48,12 @@
#define GUNZE_MAX_LENGTH 10
-static char *gunze_name = "Gunze AHL-51S TouchScreen";
-
/*
* Per-touchscreen data.
*/
struct gunze {
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
int idx;
unsigned char data[GUNZE_MAX_LENGTH];
@@ -64,7 +62,7 @@
static void gunze_process_packet(struct gunze* gunze, struct pt_regs *regs)
{
- struct input_dev *dev = &gunze->dev;
+ struct input_dev *dev = gunze->dev;
if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' ||
(gunze->data[0] != 'T' && gunze->data[0] != 'R')) {
@@ -100,11 +98,13 @@
static void gunze_disconnect(struct serio *serio)
{
- struct gunze* gunze = serio_get_drvdata(serio);
+ struct gunze *gunze = serio_get_drvdata(serio);
- input_unregister_device(&gunze->dev);
+ input_get_device(gunze->dev);
+ input_unregister_device(gunze->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_put_device(gunze->dev);
kfree(gunze);
}
@@ -117,45 +117,45 @@
static int gunze_connect(struct serio *serio, struct serio_driver *drv)
{
struct gunze *gunze;
+ struct input_dev *input_dev;
int err;
- if (!(gunze = kmalloc(sizeof(struct gunze), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(gunze, 0, sizeof(struct gunze));
-
- init_input_dev(&gunze->dev);
- gunze->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- gunze->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- input_set_abs_params(&gunze->dev, ABS_X, 24, 1000, 0, 0);
- input_set_abs_params(&gunze->dev, ABS_Y, 24, 1000, 0, 0);
+ gunze = kzalloc(sizeof(struct gunze), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!gunze || !input_dev) {
+ err = -ENOMEM;
+ goto fail;
+ }
gunze->serio = serio;
-
+ gunze->dev = input_dev;
sprintf(gunze->phys, "%s/input0", serio->phys);
- gunze->dev.private = gunze;
- gunze->dev.name = gunze_name;
- gunze->dev.phys = gunze->phys;
- gunze->dev.id.bustype = BUS_RS232;
- gunze->dev.id.vendor = SERIO_GUNZE;
- gunze->dev.id.product = 0x0051;
- gunze->dev.id.version = 0x0100;
+ input_dev->private = gunze;
+ input_dev->name = "Gunze AHL-51S TouchScreen";
+ input_dev->phys = gunze->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_GUNZE;
+ input_dev->id.product = 0x0051;
+ input_dev->id.version = 0x0100;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, 24, 1000, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 24, 1000, 0, 0);
serio_set_drvdata(serio, gunze);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(gunze);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&gunze->dev);
-
- printk(KERN_INFO "input: %s on %s\n", gunze_name, serio->phys);
-
+ input_register_device(gunze->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(gunze);
+ return err;
}
/*
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index bcfa1e3..a18d56b 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -39,7 +39,6 @@
#include <linux/serio.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/pm.h>
/* SA1100 serial defines */
#include <asm/arch/hardware.h>
@@ -93,16 +92,12 @@
#define H3600_SCANCODE_LEFT 8 /* 8 -> left */
#define H3600_SCANCODE_DOWN 9 /* 9 -> down */
-static char *h3600_name = "H3600 TouchScreen";
-
/*
* Per-touchscreen data.
*/
struct h3600_dev {
- struct input_dev dev;
- struct pm_dev *pm_dev;
+ struct input_dev *dev;
struct serio *serio;
- struct pm_dev *pm_dev;
unsigned char event; /* event ID from packet */
unsigned char chksum;
unsigned char len;
@@ -163,33 +158,6 @@
return 0;
}
-static int suspended = 0;
-static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req,
- void *data)
-{
- struct input_dev *dev = (struct input_dev *) data;
-
- switch (req) {
- case PM_SUSPEND: /* enter D1-D3 */
- suspended = 1;
- h3600_flite_power(dev, FLITE_PWR_OFF);
- break;
- case PM_BLANK:
- if (!suspended)
- h3600_flite_power(dev, FLITE_PWR_OFF);
- break;
- case PM_RESUME: /* enter D0 */
- /* same as unblank */
- case PM_UNBLANK:
- if (suspended) {
- //initSerial();
- suspended = 0;
- }
- h3600_flite_power(dev, FLITE_PWR_ON);
- break;
- }
- return 0;
-}
#endif
/*
@@ -199,7 +167,7 @@
*/
static void h3600ts_process_packet(struct h3600_dev *ts, struct pt_regs *regs)
{
- struct input_dev *dev = &ts->dev;
+ struct input_dev *dev = ts->dev;
static int touched = 0;
int key, down = 0;
@@ -295,6 +263,7 @@
static int h3600ts_event(struct input_dev *dev, unsigned int type,
unsigned int code, int value)
{
+#if 0
struct h3600_dev *ts = dev->private;
switch (type) {
@@ -304,6 +273,8 @@
}
}
return -1;
+#endif
+ return 0;
}
/*
@@ -380,14 +351,48 @@
static int h3600ts_connect(struct serio *serio, struct serio_driver *drv)
{
struct h3600_dev *ts;
+ struct input_dev *input_dev;
int err;
- if (!(ts = kmalloc(sizeof(struct h3600_dev), GFP_KERNEL)))
- return -ENOMEM;
+ ts = kzalloc(sizeof(struct h3600_dev), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ts || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
- memset(ts, 0, sizeof(struct h3600_dev));
+ ts->serio = serio;
+ ts->dev = input_dev;
+ sprintf(ts->phys, "%s/input0", serio->phys);
- init_input_dev(&ts->dev);
+ input_dev->name = "H3600 TouchScreen";
+ input_dev->phys = ts->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_H3600;
+ input_dev->id.product = 0x0666; /* FIXME !!! We can ask the hardware */
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &serio->dev;
+ input_dev->private = ts;
+
+ input_dev->event = h3600ts_event;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR);
+ input_dev->ledbit[0] = BIT(LED_SLEEP);
+ input_set_abs_params(input_dev, ABS_X, 60, 985, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 35, 1024, 0, 0);
+
+ set_bit(KEY_RECORD, input_dev->keybit);
+ set_bit(KEY_Q, input_dev->keybit);
+ set_bit(KEY_PROG1, input_dev->keybit);
+ set_bit(KEY_PROG2, input_dev->keybit);
+ set_bit(KEY_PROG3, input_dev->keybit);
+ set_bit(KEY_UP, input_dev->keybit);
+ set_bit(KEY_RIGHT, input_dev->keybit);
+ set_bit(KEY_LEFT, input_dev->keybit);
+ set_bit(KEY_DOWN, input_dev->keybit);
+ set_bit(KEY_ENTER, input_dev->keybit);
+ set_bit(KEY_SUSPEND, input_dev->keybit);
+ set_bit(BTN_TOUCH, input_dev->keybit);
/* Device specific stuff */
set_GPIO_IRQ_edge(GPIO_BITSY_ACTION_BUTTON, GPIO_BOTH_EDGES);
@@ -397,73 +402,35 @@
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
"h3600_action", &ts->dev)) {
printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
- kfree(ts);
- return -EBUSY;
+ err = -EBUSY;
+ goto fail2;
}
if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
"h3600_suspend", &ts->dev)) {
- free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev);
printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
- kfree(ts);
- return -EBUSY;
+ err = -EBUSY;
+ goto fail3;
}
- /* Now we have things going we setup our input device */
- ts->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR);
- ts->dev.ledbit[0] = BIT(LED_SLEEP);
- input_set_abs_params(&ts->dev, ABS_X, 60, 985, 0, 0);
- input_set_abs_params(&ts->dev, ABS_Y, 35, 1024, 0, 0);
-
- set_bit(KEY_RECORD, ts->dev.keybit);
- set_bit(KEY_Q, ts->dev.keybit);
- set_bit(KEY_PROG1, ts->dev.keybit);
- set_bit(KEY_PROG2, ts->dev.keybit);
- set_bit(KEY_PROG3, ts->dev.keybit);
- set_bit(KEY_UP, ts->dev.keybit);
- set_bit(KEY_RIGHT, ts->dev.keybit);
- set_bit(KEY_LEFT, ts->dev.keybit);
- set_bit(KEY_DOWN, ts->dev.keybit);
- set_bit(KEY_ENTER, ts->dev.keybit);
- ts->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
- ts->dev.keybit[LONG(KEY_SUSPEND)] |= BIT(KEY_SUSPEND);
-
- ts->serio = serio;
-
- sprintf(ts->phys, "%s/input0", serio->phys);
-
- ts->dev.event = h3600ts_event;
- ts->dev.private = ts;
- ts->dev.name = h3600_name;
- ts->dev.phys = ts->phys;
- ts->dev.id.bustype = BUS_RS232;
- ts->dev.id.vendor = SERIO_H3600;
- ts->dev.id.product = 0x0666; /* FIXME !!! We can ask the hardware */
- ts->dev.id.version = 0x0100;
-
serio_set_drvdata(serio, ts);
err = serio_open(serio, drv);
- if (err) {
- free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts);
- free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts);
- serio_set_drvdata(serio, NULL);
- kfree(ts);
+ if (err)
return err;
- }
//h3600_flite_control(1, 25); /* default brightness */
-#ifdef CONFIG_PM
- ts->pm_dev = pm_register(PM_ILLUMINATION_DEV, PM_SYS_LIGHT,
- h3600ts_pm_callback);
- printk("registered pm callback\n");
-#endif
- input_register_device(&ts->dev);
-
- printk(KERN_INFO "input: %s on %s\n", h3600_name, serio->phys);
+ input_register_device(ts->dev);
return 0;
+
+fail3: free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev);
+fail2: free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev);
+fail1: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(ts);
+ return err;
}
/*
@@ -476,9 +443,11 @@
free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev);
free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, &ts->dev);
- input_unregister_device(&ts->dev);
+ input_get_device(ts->dev);
+ input_unregister_device(ts->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_put_device(ts->dev);
kfree(ts);
}
diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c
index 7e14044..957dd5a 100644
--- a/drivers/input/touchscreen/hp680_ts_input.c
+++ b/drivers/input/touchscreen/hp680_ts_input.c
@@ -21,10 +21,8 @@
static void do_softint(void *data);
-static struct input_dev hp680_ts_dev;
+static struct input_dev *hp680_ts_dev;
static DECLARE_WORK(work, do_softint, 0);
-static char *hp680_ts_name = "HP Jornada touchscreen";
-static char *hp680_ts_phys = "input0";
static void do_softint(void *data)
{
@@ -58,14 +56,14 @@
}
if (touched) {
- input_report_key(&hp680_ts_dev, BTN_TOUCH, 1);
- input_report_abs(&hp680_ts_dev, ABS_X, absx);
- input_report_abs(&hp680_ts_dev, ABS_Y, absy);
+ input_report_key(hp680_ts_dev, BTN_TOUCH, 1);
+ input_report_abs(hp680_ts_dev, ABS_X, absx);
+ input_report_abs(hp680_ts_dev, ABS_Y, absy);
} else {
- input_report_key(&hp680_ts_dev, BTN_TOUCH, 0);
+ input_report_key(hp680_ts_dev, BTN_TOUCH, 0);
}
- input_sync(&hp680_ts_dev);
+ input_sync(hp680_ts_dev);
enable_irq(HP680_TS_IRQ);
}
@@ -92,27 +90,29 @@
scpcr |= SCPCR_TS_ENABLE;
ctrl_outw(scpcr, SCPCR);
- memset(&hp680_ts_dev, 0, sizeof(hp680_ts_dev));
- init_input_dev(&hp680_ts_dev);
+ hp680_ts_dev = input_allocate_device();
+ if (!hp680_ts_dev)
+ return -ENOMEM;
- hp680_ts_dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
- hp680_ts_dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
- hp680_ts_dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ hp680_ts_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
+ hp680_ts_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
+ hp680_ts_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
- hp680_ts_dev.absmin[ABS_X] = HP680_TS_ABS_X_MIN;
- hp680_ts_dev.absmin[ABS_Y] = HP680_TS_ABS_Y_MIN;
- hp680_ts_dev.absmax[ABS_X] = HP680_TS_ABS_X_MAX;
- hp680_ts_dev.absmax[ABS_Y] = HP680_TS_ABS_Y_MAX;
+ hp680_ts_dev->absmin[ABS_X] = HP680_TS_ABS_X_MIN;
+ hp680_ts_dev->absmin[ABS_Y] = HP680_TS_ABS_Y_MIN;
+ hp680_ts_dev->absmax[ABS_X] = HP680_TS_ABS_X_MAX;
+ hp680_ts_dev->absmax[ABS_Y] = HP680_TS_ABS_Y_MAX;
- hp680_ts_dev.name = hp680_ts_name;
- hp680_ts_dev.phys = hp680_ts_phys;
- input_register_device(&hp680_ts_dev);
+ hp680_ts_dev->name = "HP Jornada touchscreen";
+ hp680_ts_dev->phys = "hp680_ts/input0";
- if (request_irq
- (HP680_TS_IRQ, hp680_ts_interrupt, SA_INTERRUPT, MODNAME, 0) < 0) {
- printk(KERN_ERR "hp680_touchscreen.c : Can't allocate irq %d\n",
+ input_register_device(hp680_ts_dev);
+
+ if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt,
+ SA_INTERRUPT, MODNAME, 0) < 0) {
+ printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n",
HP680_TS_IRQ);
- input_unregister_device(&hp680_ts_dev);
+ input_unregister_device(hp680_ts_dev);
return -EBUSY;
}
@@ -124,7 +124,7 @@
free_irq(HP680_TS_IRQ, 0);
cancel_delayed_work(&work);
flush_scheduled_work();
- input_unregister_device(&hp680_ts_dev);
+ input_unregister_device(hp680_ts_dev);
}
module_init(hp680_ts_init);
diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c
index afaaebe..4844d25 100644
--- a/drivers/input/touchscreen/mk712.c
+++ b/drivers/input/touchscreen/mk712.c
@@ -77,7 +77,7 @@
#define MK712_READ_ONE_POINT 0x20
#define MK712_POWERUP 0x40
-static struct input_dev mk712_dev;
+static struct input_dev *mk712_dev;
static DEFINE_SPINLOCK(mk712_lock);
static irqreturn_t mk712_interrupt(int irq, void *dev_id, struct pt_regs *regs)
@@ -88,7 +88,7 @@
static unsigned short last_y;
spin_lock(&mk712_lock);
- input_regs(&mk712_dev, regs);
+ input_regs(mk712_dev, regs);
status = inb(mk712_io + MK712_STATUS);
@@ -100,7 +100,7 @@
if (~status & MK712_STATUS_TOUCH)
{
debounce = 1;
- input_report_key(&mk712_dev, BTN_TOUCH, 0);
+ input_report_key(mk712_dev, BTN_TOUCH, 0);
goto end;
}
@@ -110,15 +110,15 @@
goto end;
}
- input_report_key(&mk712_dev, BTN_TOUCH, 1);
- input_report_abs(&mk712_dev, ABS_X, last_x);
- input_report_abs(&mk712_dev, ABS_Y, last_y);
+ input_report_key(mk712_dev, BTN_TOUCH, 1);
+ input_report_abs(mk712_dev, ABS_X, last_x);
+ input_report_abs(mk712_dev, ABS_Y, last_y);
end:
last_x = inw(mk712_io + MK712_X) & 0x0fff;
last_y = inw(mk712_io + MK712_Y) & 0x0fff;
- input_sync(&mk712_dev);
+ input_sync(mk712_dev);
spin_unlock(&mk712_lock);
return IRQ_HANDLED;
}
@@ -154,30 +154,11 @@
spin_unlock_irqrestore(&mk712_lock, flags);
}
-static struct input_dev mk712_dev = {
- .evbit = { BIT(EV_KEY) | BIT(EV_ABS) },
- .keybit = { [LONG(BTN_TOUCH)] = BIT(BTN_TOUCH) },
- .absbit = { BIT(ABS_X) | BIT(ABS_Y) },
- .open = mk712_open,
- .close = mk712_close,
- .name = "ICS MicroClock MK712 TouchScreen",
- .phys = "isa0260/input0",
- .absmin = { [ABS_X] = 0, [ABS_Y] = 0 },
- .absmax = { [ABS_X] = 0xfff, [ABS_Y] = 0xfff },
- .absfuzz = { [ABS_X] = 88, [ABS_Y] = 88 },
- .id = {
- .bustype = BUS_ISA,
- .vendor = 0x0005,
- .product = 0x0001,
- .version = 0x0100,
- },
-};
-
int __init mk712_init(void)
{
+ int err;
- if(!request_region(mk712_io, 8, "mk712"))
- {
+ if (!request_region(mk712_io, 8, "mk712")) {
printk(KERN_WARNING "mk712: unable to get IO region\n");
return -ENODEV;
}
@@ -188,28 +169,49 @@
(inw(mk712_io + MK712_Y) & 0xf000) ||
(inw(mk712_io + MK712_STATUS) & 0xf333)) {
printk(KERN_WARNING "mk712: device not present\n");
- release_region(mk712_io, 8);
- return -ENODEV;
+ err = -ENODEV;
+ goto fail;
}
- if(request_irq(mk712_irq, mk712_interrupt, 0, "mk712", &mk712_dev))
- {
+ if (!(mk712_dev = input_allocate_device())) {
+ printk(KERN_ERR "mk712: not enough memory\n");
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ mk712_dev->name = "ICS MicroClock MK712 TouchScreen";
+ mk712_dev->phys = "isa0260/input0";
+ mk712_dev->id.bustype = BUS_ISA;
+ mk712_dev->id.vendor = 0x0005;
+ mk712_dev->id.product = 0x0001;
+ mk712_dev->id.version = 0x0100;
+
+ mk712_dev->open = mk712_open;
+ mk712_dev->close = mk712_close;
+
+ mk712_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ mk712_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(mk712_dev, ABS_X, 0, 0xfff, 88, 0);
+ input_set_abs_params(mk712_dev, ABS_Y, 0, 0xfff, 88, 0);
+
+ if (request_irq(mk712_irq, mk712_interrupt, 0, "mk712", mk712_dev)) {
printk(KERN_WARNING "mk712: unable to get IRQ\n");
- release_region(mk712_io, 8);
- return -EBUSY;
+ err = -EBUSY;
+ goto fail;
}
- input_register_device(&mk712_dev);
-
- printk(KERN_INFO "input: ICS MicroClock MK712 TouchScreen at %#x irq %d\n", mk712_io, mk712_irq);
-
+ input_register_device(mk712_dev);
return 0;
+
+ fail: input_free_device(mk712_dev);
+ release_region(mk712_io, 8);
+ return err;
}
static void __exit mk712_exit(void)
{
- input_unregister_device(&mk712_dev);
- free_irq(mk712_irq, &mk712_dev);
+ input_unregister_device(mk712_dev);
+ free_irq(mk712_irq, mk712_dev);
release_region(mk712_io, 8);
}
diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c
index aa8ee78..1d0d37e 100644
--- a/drivers/input/touchscreen/mtouch.c
+++ b/drivers/input/touchscreen/mtouch.c
@@ -51,14 +51,12 @@
#define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3])
#define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0])
-static char *mtouch_name = "MicroTouch Serial TouchScreen";
-
/*
* Per-touchscreen data.
*/
struct mtouch {
- struct input_dev dev;
+ struct input_dev *dev;
struct serio *serio;
int idx;
unsigned char data[MTOUCH_MAX_LENGTH];
@@ -67,7 +65,7 @@
static void mtouch_process_format_tablet(struct mtouch *mtouch, struct pt_regs *regs)
{
- struct input_dev *dev = &mtouch->dev;
+ struct input_dev *dev = mtouch->dev;
if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) {
input_regs(dev, regs);
@@ -116,9 +114,11 @@
{
struct mtouch* mtouch = serio_get_drvdata(serio);
- input_unregister_device(&mtouch->dev);
+ input_get_device(mtouch->dev);
+ input_unregister_device(mtouch->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
+ input_put_device(mtouch->dev);
kfree(mtouch);
}
@@ -131,46 +131,46 @@
static int mtouch_connect(struct serio *serio, struct serio_driver *drv)
{
struct mtouch *mtouch;
+ struct input_dev *input_dev;
int err;
- if (!(mtouch = kmalloc(sizeof(*mtouch), GFP_KERNEL)))
- return -ENOMEM;
-
- memset(mtouch, 0, sizeof(*mtouch));
-
- init_input_dev(&mtouch->dev);
- mtouch->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- mtouch->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
- input_set_abs_params(&mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0);
- input_set_abs_params(&mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0);
+ mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!mtouch || !input_dev) {
+ err = -ENOMEM;
+ goto fail;
+ }
mtouch->serio = serio;
-
+ mtouch->dev = input_dev;
sprintf(mtouch->phys, "%s/input0", serio->phys);
- mtouch->dev.private = mtouch;
- mtouch->dev.name = mtouch_name;
- mtouch->dev.phys = mtouch->phys;
- mtouch->dev.id.bustype = BUS_RS232;
- mtouch->dev.id.vendor = SERIO_MICROTOUCH;
- mtouch->dev.id.product = 0;
- mtouch->dev.id.version = 0x0100;
+ input_dev->private = mtouch;
+ input_dev->name = "MicroTouch Serial TouchScreen";
+ input_dev->phys = mtouch->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_MICROTOUCH;
+ input_dev->id.product = 0;
+ input_dev->id.version = 0x0100;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0);
+ input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0);
serio_set_drvdata(serio, mtouch);
err = serio_open(serio, drv);
- if (err) {
- serio_set_drvdata(serio, NULL);
- kfree(mtouch);
- return err;
- }
+ if (err)
+ goto fail;
- input_register_device(&mtouch->dev);
-
- printk(KERN_INFO "input: %s on %s\n", mtouch->dev.name, serio->phys);
+ input_register_device(mtouch->dev);
return 0;
+
+ fail: serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(mtouch);
+ return err;
}
/*
diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c
index 50c63a1..ca15479 100644
--- a/drivers/input/tsdev.c
+++ b/drivers/input/tsdev.c
@@ -53,7 +53,6 @@
#include <linux/random.h>
#include <linux/time.h>
#include <linux/device.h>
-#include <linux/devfs_fs_kernel.h>
#ifndef CONFIG_INPUT_TSDEV_SCREEN_X
#define CONFIG_INPUT_TSDEV_SCREEN_X 240
@@ -369,6 +368,7 @@
struct input_device_id *id)
{
struct tsdev *tsdev;
+ struct class_device *cdev;
int minor, delta;
for (minor = 0; minor < TSDEV_MINORS/2 && tsdev_table[minor];
@@ -410,13 +410,13 @@
tsdev_table[minor] = tsdev;
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/ts%d", minor);
- devfs_mk_cdev(MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor + TSDEV_MINORS/2),
- S_IFCHR|S_IRUGO|S_IWUSR, "input/tsraw%d", minor);
- class_device_create(input_class,
+ cdev = class_device_create(&input_class, &dev->cdev,
MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor),
- dev->dev, "ts%d", minor);
+ dev->cdev.dev, tsdev->name);
+
+ /* temporary symlink to keep userspace happy */
+ sysfs_create_link(&input_class.subsys.kset.kobj, &cdev->kobj,
+ tsdev->name);
return &tsdev->handle;
}
@@ -426,10 +426,9 @@
struct tsdev *tsdev = handle->private;
struct tsdev_list *list;
- class_device_destroy(input_class,
+ sysfs_remove_link(&input_class.subsys.kset.kobj, tsdev->name);
+ class_device_destroy(&input_class,
MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor));
- devfs_remove("input/ts%d", tsdev->minor);
- devfs_remove("input/tsraw%d", tsdev->minor);
tsdev->exist = 0;
if (tsdev->open) {
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 04fb606..11ae0fd 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1505,7 +1505,7 @@
return PTR_ERR(capi_class);
}
- class_device_create(capi_class, MKDEV(capi_major, 0), NULL, "capi");
+ class_device_create(capi_class, NULL, MKDEV(capi_major, 0), NULL, "capi");
devfs_mk_cdev(MKDEV(capi_major, 0), S_IFCHR | S_IRUSR | S_IWUSR,
"isdn/capi20");
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index c0dc1e3..d2ead17 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -905,5 +905,5 @@
adb_dev_class = class_create(THIS_MODULE, "adb");
if (IS_ERR(adb_dev_class))
return;
- class_device_create(adb_dev_class, MKDEV(ADB_MAJOR, 0), NULL, "adb");
+ class_device_create(adb_dev_class, NULL, MKDEV(ADB_MAJOR, 0), NULL, "adb");
}
diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c
index db654e8..cdb6d02 100644
--- a/drivers/macintosh/adbhid.c
+++ b/drivers/macintosh/adbhid.c
@@ -206,7 +206,7 @@
};
struct adbhid {
- struct input_dev input;
+ struct input_dev *input;
int id;
int default_id;
int original_handler_id;
@@ -291,10 +291,10 @@
switch (keycode) {
case ADB_KEY_CAPSLOCK: /* Generate down/up events for CapsLock everytime. */
- input_regs(&ahid->input, regs);
- input_report_key(&ahid->input, KEY_CAPSLOCK, 1);
- input_report_key(&ahid->input, KEY_CAPSLOCK, 0);
- input_sync(&ahid->input);
+ input_regs(ahid->input, regs);
+ input_report_key(ahid->input, KEY_CAPSLOCK, 1);
+ input_report_key(ahid->input, KEY_CAPSLOCK, 0);
+ input_sync(ahid->input);
return;
#ifdef CONFIG_PPC_PMAC
case ADB_KEY_POWER_OLD: /* Power key on PBook 3400 needs remapping */
@@ -347,10 +347,10 @@
}
if (adbhid[id]->keycode[keycode]) {
- input_regs(&adbhid[id]->input, regs);
- input_report_key(&adbhid[id]->input,
+ input_regs(adbhid[id]->input, regs);
+ input_report_key(adbhid[id]->input,
adbhid[id]->keycode[keycode], !up_flag);
- input_sync(&adbhid[id]->input);
+ input_sync(adbhid[id]->input);
} else
printk(KERN_INFO "Unhandled ADB key (scancode %#02x) %s.\n", keycode,
up_flag ? "released" : "pressed");
@@ -441,20 +441,20 @@
break;
}
- input_regs(&adbhid[id]->input, regs);
+ input_regs(adbhid[id]->input, regs);
- input_report_key(&adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1));
- input_report_key(&adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1));
+ input_report_key(adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1));
+ input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1));
if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD)
- input_report_key(&adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1));
+ input_report_key(adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1));
- input_report_rel(&adbhid[id]->input, REL_X,
+ input_report_rel(adbhid[id]->input, REL_X,
((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 ));
- input_report_rel(&adbhid[id]->input, REL_Y,
+ input_report_rel(adbhid[id]->input, REL_Y,
((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 ));
- input_sync(&adbhid[id]->input);
+ input_sync(adbhid[id]->input);
}
static void
@@ -467,7 +467,7 @@
return;
}
- input_regs(&adbhid[id]->input, regs);
+ input_regs(adbhid[id]->input, regs);
switch (adbhid[id]->original_handler_id) {
default:
@@ -477,19 +477,19 @@
switch (data[1] & 0x0f) {
case 0x0: /* microphone */
- input_report_key(&adbhid[id]->input, KEY_SOUND, down);
+ input_report_key(adbhid[id]->input, KEY_SOUND, down);
break;
case 0x1: /* mute */
- input_report_key(&adbhid[id]->input, KEY_MUTE, down);
+ input_report_key(adbhid[id]->input, KEY_MUTE, down);
break;
case 0x2: /* volume decrease */
- input_report_key(&adbhid[id]->input, KEY_VOLUMEDOWN, down);
+ input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
break;
case 0x3: /* volume increase */
- input_report_key(&adbhid[id]->input, KEY_VOLUMEUP, down);
+ input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
break;
default:
@@ -513,19 +513,19 @@
switch (data[1] & 0x0f) {
case 0x8: /* mute */
- input_report_key(&adbhid[id]->input, KEY_MUTE, down);
+ input_report_key(adbhid[id]->input, KEY_MUTE, down);
break;
case 0x7: /* volume decrease */
- input_report_key(&adbhid[id]->input, KEY_VOLUMEDOWN, down);
+ input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down);
break;
case 0x6: /* volume increase */
- input_report_key(&adbhid[id]->input, KEY_VOLUMEUP, down);
+ input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down);
break;
case 0xb: /* eject */
- input_report_key(&adbhid[id]->input, KEY_EJECTCD, down);
+ input_report_key(adbhid[id]->input, KEY_EJECTCD, down);
break;
case 0xa: /* brightness decrease */
@@ -539,7 +539,7 @@
}
}
#endif /* CONFIG_PMAC_BACKLIGHT */
- input_report_key(&adbhid[id]->input, KEY_BRIGHTNESSDOWN, down);
+ input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down);
break;
case 0x9: /* brightness increase */
@@ -553,19 +553,19 @@
}
}
#endif /* CONFIG_PMAC_BACKLIGHT */
- input_report_key(&adbhid[id]->input, KEY_BRIGHTNESSUP, down);
+ input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down);
break;
case 0xc: /* videomode switch */
- input_report_key(&adbhid[id]->input, KEY_SWITCHVIDEOMODE, down);
+ input_report_key(adbhid[id]->input, KEY_SWITCHVIDEOMODE, down);
break;
case 0xd: /* keyboard illumination toggle */
- input_report_key(&adbhid[id]->input, KEY_KBDILLUMTOGGLE, down);
+ input_report_key(adbhid[id]->input, KEY_KBDILLUMTOGGLE, down);
break;
case 0xe: /* keyboard illumination decrease */
- input_report_key(&adbhid[id]->input, KEY_KBDILLUMDOWN, down);
+ input_report_key(adbhid[id]->input, KEY_KBDILLUMDOWN, down);
break;
case 0xf:
@@ -573,7 +573,7 @@
case 0x8f:
case 0x0f:
/* keyboard illumination increase */
- input_report_key(&adbhid[id]->input, KEY_KBDILLUMUP, down);
+ input_report_key(adbhid[id]->input, KEY_KBDILLUMUP, down);
break;
case 0x7f:
@@ -596,7 +596,7 @@
break;
}
- input_sync(&adbhid[id]->input);
+ input_sync(adbhid[id]->input);
}
static struct adb_request led_request;
@@ -683,7 +683,7 @@
int i;
for (i = 1; i < 16; i++) {
if (adbhid[i])
- del_timer_sync(&adbhid[i]->input.timer);
+ del_timer_sync(&adbhid[i]->input->timer);
}
}
@@ -699,153 +699,163 @@
return NOTIFY_DONE;
}
-static void
+static int
adbhid_input_register(int id, int default_id, int original_handler_id,
int current_handler_id, int mouse_kind)
{
+ struct adbhid *hid;
+ struct input_dev *input_dev;
+ int err;
int i;
if (adbhid[id]) {
printk(KERN_ERR "Trying to reregister ADB HID on ID %d\n", id);
- return;
+ return -EEXIST;
}
- if (!(adbhid[id] = kmalloc(sizeof(struct adbhid), GFP_KERNEL)))
- return;
+ adbhid[id] = hid = kzalloc(sizeof(struct adbhid), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!hid || !input_dev) {
+ err = -ENOMEM;
+ goto fail;
- memset(adbhid[id], 0, sizeof(struct adbhid));
- sprintf(adbhid[id]->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id);
+ }
- init_input_dev(&adbhid[id]->input);
+ sprintf(hid->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id);
- adbhid[id]->id = default_id;
- adbhid[id]->original_handler_id = original_handler_id;
- adbhid[id]->current_handler_id = current_handler_id;
- adbhid[id]->mouse_kind = mouse_kind;
- adbhid[id]->flags = 0;
- adbhid[id]->input.private = adbhid[id];
- adbhid[id]->input.name = adbhid[id]->name;
- adbhid[id]->input.phys = adbhid[id]->phys;
- adbhid[id]->input.id.bustype = BUS_ADB;
- adbhid[id]->input.id.vendor = 0x0001;
- adbhid[id]->input.id.product = (id << 12) | (default_id << 8) | original_handler_id;
- adbhid[id]->input.id.version = 0x0100;
+ hid->id = default_id;
+ hid->original_handler_id = original_handler_id;
+ hid->current_handler_id = current_handler_id;
+ hid->mouse_kind = mouse_kind;
+ hid->flags = 0;
+ input_dev->private = hid;
+ input_dev->name = hid->name;
+ input_dev->phys = hid->phys;
+ input_dev->id.bustype = BUS_ADB;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = (id << 12) | (default_id << 8) | original_handler_id;
+ input_dev->id.version = 0x0100;
switch (default_id) {
case ADB_KEYBOARD:
- if (!(adbhid[id]->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL))) {
- kfree(adbhid[id]);
- return;
+ hid->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL);
+ if (!hid->keycode) {
+ err = -ENOMEM;
+ goto fail;
}
- sprintf(adbhid[id]->name, "ADB keyboard");
+ sprintf(hid->name, "ADB keyboard");
- memcpy(adbhid[id]->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes));
+ memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes));
printk(KERN_INFO "Detected ADB keyboard, type ");
switch (original_handler_id) {
default:
printk("<unknown>.\n");
- adbhid[id]->input.id.version = ADB_KEYBOARD_UNKNOWN;
+ input_dev->id.version = ADB_KEYBOARD_UNKNOWN;
break;
case 0x01: case 0x02: case 0x03: case 0x06: case 0x08:
case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C:
case 0xC0: case 0xC3: case 0xC6:
printk("ANSI.\n");
- adbhid[id]->input.id.version = ADB_KEYBOARD_ANSI;
+ input_dev->id.version = ADB_KEYBOARD_ANSI;
break;
case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D:
case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1:
case 0xC4: case 0xC7:
printk("ISO, swapping keys.\n");
- adbhid[id]->input.id.version = ADB_KEYBOARD_ISO;
- i = adbhid[id]->keycode[10];
- adbhid[id]->keycode[10] = adbhid[id]->keycode[50];
- adbhid[id]->keycode[50] = i;
+ input_dev->id.version = ADB_KEYBOARD_ISO;
+ i = hid->keycode[10];
+ hid->keycode[10] = hid->keycode[50];
+ hid->keycode[50] = i;
break;
case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A:
case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9:
printk("JIS.\n");
- adbhid[id]->input.id.version = ADB_KEYBOARD_JIS;
+ input_dev->id.version = ADB_KEYBOARD_JIS;
break;
}
for (i = 0; i < 128; i++)
- if (adbhid[id]->keycode[i])
- set_bit(adbhid[id]->keycode[i], adbhid[id]->input.keybit);
+ if (hid->keycode[i])
+ set_bit(hid->keycode[i], input_dev->keybit);
- adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
- adbhid[id]->input.ledbit[0] = BIT(LED_SCROLLL) | BIT(LED_CAPSL) | BIT(LED_NUML);
- adbhid[id]->input.event = adbhid_kbd_event;
- adbhid[id]->input.keycodemax = 127;
- adbhid[id]->input.keycodesize = 1;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
+ input_dev->ledbit[0] = BIT(LED_SCROLLL) | BIT(LED_CAPSL) | BIT(LED_NUML);
+ input_dev->event = adbhid_kbd_event;
+ input_dev->keycodemax = 127;
+ input_dev->keycodesize = 1;
break;
case ADB_MOUSE:
- sprintf(adbhid[id]->name, "ADB mouse");
+ sprintf(hid->name, "ADB mouse");
- adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- adbhid[id]->input.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- adbhid[id]->input.relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
break;
case ADB_MISC:
switch (original_handler_id) {
case 0x02: /* Adjustable keyboard button device */
- sprintf(adbhid[id]->name, "ADB adjustable keyboard buttons");
- adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- set_bit(KEY_SOUND, adbhid[id]->input.keybit);
- set_bit(KEY_MUTE, adbhid[id]->input.keybit);
- set_bit(KEY_VOLUMEUP, adbhid[id]->input.keybit);
- set_bit(KEY_VOLUMEDOWN, adbhid[id]->input.keybit);
+ sprintf(hid->name, "ADB adjustable keyboard buttons");
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ set_bit(KEY_SOUND, input_dev->keybit);
+ set_bit(KEY_MUTE, input_dev->keybit);
+ set_bit(KEY_VOLUMEUP, input_dev->keybit);
+ set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
break;
case 0x1f: /* Powerbook button device */
- sprintf(adbhid[id]->name, "ADB Powerbook buttons");
- adbhid[id]->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- set_bit(KEY_MUTE, adbhid[id]->input.keybit);
- set_bit(KEY_VOLUMEUP, adbhid[id]->input.keybit);
- set_bit(KEY_VOLUMEDOWN, adbhid[id]->input.keybit);
- set_bit(KEY_BRIGHTNESSUP, adbhid[id]->input.keybit);
- set_bit(KEY_BRIGHTNESSDOWN, adbhid[id]->input.keybit);
- set_bit(KEY_EJECTCD, adbhid[id]->input.keybit);
- set_bit(KEY_SWITCHVIDEOMODE, adbhid[id]->input.keybit);
- set_bit(KEY_KBDILLUMTOGGLE, adbhid[id]->input.keybit);
- set_bit(KEY_KBDILLUMDOWN, adbhid[id]->input.keybit);
- set_bit(KEY_KBDILLUMUP, adbhid[id]->input.keybit);
+ sprintf(hid->name, "ADB Powerbook buttons");
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ set_bit(KEY_MUTE, input_dev->keybit);
+ set_bit(KEY_VOLUMEUP, input_dev->keybit);
+ set_bit(KEY_VOLUMEDOWN, input_dev->keybit);
+ set_bit(KEY_BRIGHTNESSUP, input_dev->keybit);
+ set_bit(KEY_BRIGHTNESSDOWN, input_dev->keybit);
+ set_bit(KEY_EJECTCD, input_dev->keybit);
+ set_bit(KEY_SWITCHVIDEOMODE, input_dev->keybit);
+ set_bit(KEY_KBDILLUMTOGGLE, input_dev->keybit);
+ set_bit(KEY_KBDILLUMDOWN, input_dev->keybit);
+ set_bit(KEY_KBDILLUMUP, input_dev->keybit);
break;
}
- if (adbhid[id]->name[0])
+ if (hid->name[0])
break;
/* else fall through */
default:
printk(KERN_INFO "Trying to register unknown ADB device to input layer.\n");
- kfree(adbhid[id]);
- return;
+ err = -ENODEV;
+ goto fail;
}
- adbhid[id]->input.keycode = adbhid[id]->keycode;
+ input_dev->keycode = hid->keycode;
- input_register_device(&adbhid[id]->input);
-
- printk(KERN_INFO "input: %s on %s\n",
- adbhid[id]->name, adbhid[id]->phys);
+ input_register_device(input_dev);
if (default_id == ADB_KEYBOARD) {
/* HACK WARNING!! This should go away as soon there is an utility
* to control that for event devices.
*/
- adbhid[id]->input.rep[REP_DELAY] = 500; /* input layer default: 250 */
- adbhid[id]->input.rep[REP_PERIOD] = 66; /* input layer default: 33 */
+ input_dev->rep[REP_DELAY] = 500; /* input layer default: 250 */
+ input_dev->rep[REP_PERIOD] = 66; /* input layer default: 33 */
}
+
+ return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(hid);
+ adbhid[id] = NULL;
+ return err;
}
static void adbhid_input_unregister(int id)
{
- input_unregister_device(&adbhid[id]->input);
+ input_unregister_device(adbhid[id]->input);
if (adbhid[id]->keycode)
kfree(adbhid[id]->keycode);
kfree(adbhid[id]);
@@ -858,7 +868,7 @@
int cur_handler_id, int mk)
{
if (adbhid[id]) {
- if (adbhid[id]->input.id.product !=
+ if (adbhid[id]->input->id.product !=
((id << 12)|(default_id << 8)|org_handler_id)) {
adbhid_input_unregister(id);
adbhid_input_register(id, default_id, org_handler_id,
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index 5ad3a5a..a666361 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -16,8 +16,8 @@
#include <linux/module.h>
-static struct input_dev emumousebtn;
-static void emumousebtn_input_register(void);
+static struct input_dev *emumousebtn;
+static int emumousebtn_input_register(void);
static int mouse_emulate_buttons = 0;
static int mouse_button2_keycode = KEY_RIGHTCTRL; /* right control key */
static int mouse_button3_keycode = KEY_RIGHTALT; /* right option key */
@@ -90,10 +90,10 @@
&& (keycode == mouse_button2_keycode
|| keycode == mouse_button3_keycode)) {
if (mouse_emulate_buttons == 1) {
- input_report_key(&emumousebtn,
+ input_report_key(emumousebtn,
keycode == mouse_button2_keycode ? BTN_MIDDLE : BTN_RIGHT,
down);
- input_sync(&emumousebtn);
+ input_sync(emumousebtn);
return 1;
}
mouse_last_keycode = down ? keycode : 0;
@@ -105,30 +105,34 @@
EXPORT_SYMBOL(mac_hid_mouse_emulate_buttons);
-static void emumousebtn_input_register(void)
+static int emumousebtn_input_register(void)
{
- emumousebtn.name = "Macintosh mouse button emulation";
+ emumousebtn = input_allocate_device();
+ if (!emumousebtn)
+ return -ENOMEM;
- init_input_dev(&emumousebtn);
+ emumousebtn->name = "Macintosh mouse button emulation";
+ emumousebtn->id.bustype = BUS_ADB;
+ emumousebtn->id.vendor = 0x0001;
+ emumousebtn->id.product = 0x0001;
+ emumousebtn->id.version = 0x0100;
- emumousebtn.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- emumousebtn.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
- emumousebtn.relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ emumousebtn->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ emumousebtn->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
+ emumousebtn->relbit[0] = BIT(REL_X) | BIT(REL_Y);
- emumousebtn.id.bustype = BUS_ADB;
- emumousebtn.id.vendor = 0x0001;
- emumousebtn.id.product = 0x0001;
- emumousebtn.id.version = 0x0100;
+ input_register_device(emumousebtn);
- input_register_device(&emumousebtn);
-
- printk(KERN_INFO "input: Macintosh mouse button emulation\n");
+ return 0;
}
int __init mac_hid_init(void)
{
+ int err;
- emumousebtn_input_register();
+ err = emumousebtn_input_register();
+ if (err)
+ return err;
#if defined(CONFIG_SYSCTL)
mac_hid_sysctl_header = register_sysctl_table(mac_hid_root_dir, 1);
diff --git a/drivers/media/common/ir-common.c b/drivers/media/common/ir-common.c
index a0e700d..06f4d46 100644
--- a/drivers/media/common/ir-common.c
+++ b/drivers/media/common/ir-common.c
@@ -252,7 +252,6 @@
if (ir_codes)
memcpy(ir->ir_codes, ir_codes, sizeof(ir->ir_codes));
- init_input_dev(dev);
dev->keycode = ir->ir_codes;
dev->keycodesize = sizeof(IR_KEYTAB_TYPE);
dev->keycodemax = IR_KEYTAB_SIZE;
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 6db0929..a1607e7 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -137,7 +137,8 @@
struct urb *stream_urb [STREAM_URB_COUNT];
#ifdef ENABLE_RC
- struct input_dev rc_input_dev;
+ struct input_dev *rc_input_dev;
+ char phys[64];
struct work_struct rc_query_work;
int rc_input_event;
u32 rc_last_code;
@@ -683,6 +684,7 @@
};
#ifdef ENABLE_RC
+
static void cinergyt2_query_rc (void *data)
{
struct cinergyt2 *cinergyt2 = data;
@@ -703,7 +705,7 @@
/* stop key repeat */
if (cinergyt2->rc_input_event != KEY_MAX) {
dprintk(1, "rc_input_event=%d Up\n", cinergyt2->rc_input_event);
- input_report_key(&cinergyt2->rc_input_dev,
+ input_report_key(cinergyt2->rc_input_dev,
cinergyt2->rc_input_event, 0);
cinergyt2->rc_input_event = KEY_MAX;
}
@@ -722,7 +724,7 @@
/* keyrepeat bit -> just repeat last rc_input_event */
} else {
cinergyt2->rc_input_event = KEY_MAX;
- for (i = 0; i < sizeof(rc_keys) / sizeof(rc_keys[0]); i += 3) {
+ for (i = 0; i < ARRAY_SIZE(rc_keys); i += 3) {
if (rc_keys[i + 0] == rc_events[n].type &&
rc_keys[i + 1] == le32_to_cpu(rc_events[n].value)) {
cinergyt2->rc_input_event = rc_keys[i + 2];
@@ -736,11 +738,11 @@
cinergyt2->rc_last_code != ~0) {
/* emit a key-up so the double event is recognized */
dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event);
- input_report_key(&cinergyt2->rc_input_dev,
+ input_report_key(cinergyt2->rc_input_dev,
cinergyt2->rc_input_event, 0);
}
dprintk(1, "rc_input_event=%d\n", cinergyt2->rc_input_event);
- input_report_key(&cinergyt2->rc_input_dev,
+ input_report_key(cinergyt2->rc_input_dev,
cinergyt2->rc_input_event, 1);
cinergyt2->rc_last_code = rc_events[n].value;
}
@@ -752,7 +754,59 @@
up(&cinergyt2->sem);
}
-#endif
+
+static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2)
+{
+ struct input_dev *input_dev;
+ int i;
+
+ cinergyt2->rc_input_dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys));
+ strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys));
+ cinergyt2->rc_input_event = KEY_MAX;
+ cinergyt2->rc_last_code = ~0;
+ INIT_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc, cinergyt2);
+
+ input_dev->name = DRIVER_NAME " remote control";
+ input_dev->phys = cinergyt2->phys;
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+ for (i = 0; ARRAY_SIZE(rc_keys); i += 3)
+ set_bit(rc_keys[i + 2], input_dev->keybit);
+ input_dev->keycodesize = 0;
+ input_dev->keycodemax = 0;
+
+ input_register_device(cinergyt2->rc_input_dev);
+ schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
+}
+
+static void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2)
+{
+ cancel_delayed_work(&cinergyt2->rc_query_work);
+ flush_scheduled_work();
+ input_unregister_device(cinergyt2->rc_input_dev);
+}
+
+static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2)
+{
+ cancel_delayed_work(&cinergyt2->rc_query_work);
+}
+
+static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2)
+{
+ schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
+}
+
+#else
+
+static inline int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) { return 0; }
+static inline void cinergyt2_unregister_rc(struct cinergyt2 *cinergyt2) { }
+static inline void cinergyt2_suspend_rc(struct cinergyt2 *cinergyt2) { }
+static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) { }
+
+#endif /* ENABLE_RC */
static void cinergyt2_query (void *data)
{
@@ -789,9 +843,6 @@
{
struct cinergyt2 *cinergyt2;
int err;
-#ifdef ENABLE_RC
- int i;
-#endif
if (!(cinergyt2 = kmalloc (sizeof(struct cinergyt2), GFP_KERNEL))) {
dprintk(1, "out of memory?!?\n");
@@ -846,30 +897,17 @@
&cinergyt2_fe_template, cinergyt2,
DVB_DEVICE_FRONTEND);
-#ifdef ENABLE_RC
- cinergyt2->rc_input_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
- cinergyt2->rc_input_dev.keycodesize = 0;
- cinergyt2->rc_input_dev.keycodemax = 0;
- cinergyt2->rc_input_dev.name = DRIVER_NAME " remote control";
+ err = cinergyt2_register_rc(cinergyt2);
+ if (err)
+ goto bailout;
- for (i = 0; i < sizeof(rc_keys) / sizeof(rc_keys[0]); i += 3)
- set_bit(rc_keys[i + 2], cinergyt2->rc_input_dev.keybit);
-
- input_register_device(&cinergyt2->rc_input_dev);
-
- cinergyt2->rc_input_event = KEY_MAX;
- cinergyt2->rc_last_code = ~0;
-
- INIT_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc, cinergyt2);
- schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
-#endif
return 0;
bailout:
dvb_dmxdev_release(&cinergyt2->dmxdev);
dvb_dmx_release(&cinergyt2->demux);
- dvb_unregister_adapter (&cinergyt2->adapter);
- cinergyt2_free_stream_urbs (cinergyt2);
+ dvb_unregister_adapter(&cinergyt2->adapter);
+ cinergyt2_free_stream_urbs(cinergyt2);
kfree(cinergyt2);
return -ENOMEM;
}
@@ -881,11 +919,7 @@
if (down_interruptible(&cinergyt2->sem))
return;
-#ifdef ENABLE_RC
- cancel_delayed_work(&cinergyt2->rc_query_work);
- flush_scheduled_work();
- input_unregister_device(&cinergyt2->rc_input_dev);
-#endif
+ cinergyt2_unregister_rc(cinergyt2);
cinergyt2->demux.dmx.close(&cinergyt2->demux.dmx);
dvb_net_release(&cinergyt2->dvbnet);
@@ -908,9 +942,8 @@
if (state.event > PM_EVENT_ON) {
struct cinergyt2 *cinergyt2 = usb_get_intfdata (intf);
-#ifdef ENABLE_RC
- cancel_delayed_work(&cinergyt2->rc_query_work);
-#endif
+
+ cinergyt2_suspend_rc(cinergyt2);
cancel_delayed_work(&cinergyt2->query_work);
if (cinergyt2->streaming)
cinergyt2_stop_stream_xfer(cinergyt2);
@@ -938,9 +971,8 @@
schedule_delayed_work(&cinergyt2->query_work, HZ/2);
}
-#ifdef ENABLE_RC
- schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
-#endif
+ cinergyt2_resume_rc(cinergyt2);
+
up(&cinergyt2->sem);
return 0;
}
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index 4b7adca..477b4fa 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -235,7 +235,7 @@
S_IFCHR | S_IRUSR | S_IWUSR,
"dvb/adapter%d/%s%d", adap->num, dnames[type], id);
- class_device_create(dvb_class, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
+ class_device_create(dvb_class, NULL, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
NULL, "dvb%d.%s%d", adap->num, dnames[type], id);
dprintk("DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n",
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index fc7800f..e5c6d98 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -39,9 +39,9 @@
d->last_event = event;
case REMOTE_KEY_REPEAT:
deb_rc("key repeated\n");
- input_event(&d->rc_input_dev, EV_KEY, d->last_event, 1);
- input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0);
- input_sync(&d->rc_input_dev);
+ input_event(d->rc_input_dev, EV_KEY, event, 1);
+ input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
+ input_sync(d->rc_input_dev);
break;
default:
break;
@@ -53,8 +53,8 @@
deb_rc("NO KEY PRESSED\n");
if (d->last_state != REMOTE_NO_KEY_PRESSED) {
deb_rc("releasing event %d\n",d->last_event);
- input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0);
- input_sync(&d->rc_input_dev);
+ input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
+ input_sync(d->rc_input_dev);
}
d->last_state = REMOTE_NO_KEY_PRESSED;
d->last_event = 0;
@@ -63,8 +63,8 @@
deb_rc("KEY PRESSED\n");
deb_rc("pressing event %d\n",event);
- input_event(&d->rc_input_dev, EV_KEY, event, 1);
- input_sync(&d->rc_input_dev);
+ input_event(d->rc_input_dev, EV_KEY, event, 1);
+ input_sync(d->rc_input_dev);
d->last_event = event;
d->last_state = REMOTE_KEY_PRESSED;
@@ -73,8 +73,8 @@
deb_rc("KEY_REPEAT\n");
if (d->last_state != REMOTE_NO_KEY_PRESSED) {
deb_rc("repeating event %d\n",d->last_event);
- input_event(&d->rc_input_dev, EV_KEY, d->last_event, 2);
- input_sync(&d->rc_input_dev);
+ input_event(d->rc_input_dev, EV_KEY, d->last_event, 2);
+ input_sync(d->rc_input_dev);
d->last_state = REMOTE_KEY_REPEAT;
}
default:
@@ -89,24 +89,30 @@
int dvb_usb_remote_init(struct dvb_usb_device *d)
{
int i;
+
if (d->props.rc_key_map == NULL ||
d->props.rc_query == NULL ||
dvb_usb_disable_rc_polling)
return 0;
- /* Initialise the remote-control structures.*/
- init_input_dev(&d->rc_input_dev);
+ usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
+ strlcpy(d->rc_phys, "/ir0", sizeof(d->rc_phys));
- d->rc_input_dev.evbit[0] = BIT(EV_KEY);
- d->rc_input_dev.keycodesize = sizeof(unsigned char);
- d->rc_input_dev.keycodemax = KEY_MAX;
- d->rc_input_dev.name = "IR-receiver inside an USB DVB receiver";
+ d->rc_input_dev = input_allocate_device();
+ if (!d->rc_input_dev)
+ return -ENOMEM;
+
+ d->rc_input_dev->evbit[0] = BIT(EV_KEY);
+ d->rc_input_dev->keycodesize = sizeof(unsigned char);
+ d->rc_input_dev->keycodemax = KEY_MAX;
+ d->rc_input_dev->name = "IR-receiver inside an USB DVB receiver";
+ d->rc_input_dev->phys = d->rc_phys;
/* set the bits for the keys */
- deb_rc("key map size: %d\n",d->props.rc_key_map_size);
+ deb_rc("key map size: %d\n", d->props.rc_key_map_size);
for (i = 0; i < d->props.rc_key_map_size; i++) {
deb_rc("setting bit for event %d item %d\n",d->props.rc_key_map[i].event, i);
- set_bit(d->props.rc_key_map[i].event, d->rc_input_dev.keybit);
+ set_bit(d->props.rc_key_map[i].event, d->rc_input_dev->keybit);
}
/* Start the remote-control polling. */
@@ -114,14 +120,14 @@
d->props.rc_interval = 100; /* default */
/* setting these two values to non-zero, we have to manage key repeats */
- d->rc_input_dev.rep[REP_PERIOD] = d->props.rc_interval;
- d->rc_input_dev.rep[REP_DELAY] = d->props.rc_interval + 150;
+ d->rc_input_dev->rep[REP_PERIOD] = d->props.rc_interval;
+ d->rc_input_dev->rep[REP_DELAY] = d->props.rc_interval + 150;
- input_register_device(&d->rc_input_dev);
+ input_register_device(d->rc_input_dev);
INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d);
- info("schedule remote query interval to %d msecs.",d->props.rc_interval);
+ info("schedule remote query interval to %d msecs.", d->props.rc_interval);
schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval));
d->state |= DVB_USB_STATE_REMOTE;
@@ -134,7 +140,7 @@
if (d->state & DVB_USB_STATE_REMOTE) {
cancel_delayed_work(&d->rc_query_work);
flush_scheduled_work();
- input_unregister_device(&d->rc_input_dev);
+ input_unregister_device(d->rc_input_dev);
}
d->state &= ~DVB_USB_STATE_REMOTE;
return 0;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 0e4f103..b4a1a98 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -300,7 +300,8 @@
int (*fe_init) (struct dvb_frontend *);
/* remote control */
- struct input_dev rc_input_dev;
+ struct input_dev *rc_input_dev;
+ char rc_phys[64];
struct work_struct rc_query_work;
u32 last_event;
int last_state;
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index 357a372..f5e59fc 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -15,7 +15,7 @@
static int av_cnt;
static struct av7110 *av_list[4];
-static struct input_dev input_dev;
+static struct input_dev *input_dev;
static u16 key_map [256] = {
KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7,
@@ -43,10 +43,10 @@
static void av7110_emit_keyup(unsigned long data)
{
- if (!data || !test_bit(data, input_dev.key))
+ if (!data || !test_bit(data, input_dev->key))
return;
- input_event(&input_dev, EV_KEY, data, !!0);
+ input_event(input_dev, EV_KEY, data, !!0);
}
@@ -112,13 +112,13 @@
if (timer_pending(&keyup_timer)) {
del_timer(&keyup_timer);
if (keyup_timer.data != keycode || new_toggle != old_toggle) {
- input_event(&input_dev, EV_KEY, keyup_timer.data, !!0);
- input_event(&input_dev, EV_KEY, keycode, !0);
+ input_event(input_dev, EV_KEY, keyup_timer.data, !!0);
+ input_event(input_dev, EV_KEY, keycode, !0);
} else
- input_event(&input_dev, EV_KEY, keycode, 2);
+ input_event(input_dev, EV_KEY, keycode, 2);
} else
- input_event(&input_dev, EV_KEY, keycode, !0);
+ input_event(input_dev, EV_KEY, keycode, !0);
keyup_timer.expires = jiffies + UP_TIMEOUT;
keyup_timer.data = keycode;
@@ -132,13 +132,13 @@
{
int i;
- memset(input_dev.keybit, 0, sizeof(input_dev.keybit));
+ memset(input_dev->keybit, 0, sizeof(input_dev->keybit));
- for (i = 0; i < sizeof(key_map) / sizeof(key_map[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(key_map); i++) {
if (key_map[i] > KEY_MAX)
key_map[i] = 0;
else if (key_map[i] > KEY_RESERVED)
- set_bit(key_map[i], input_dev.keybit);
+ set_bit(key_map[i], input_dev->keybit);
}
}
@@ -216,12 +216,17 @@
init_timer(&keyup_timer);
keyup_timer.data = 0;
- input_dev.name = "DVB on-card IR receiver";
- set_bit(EV_KEY, input_dev.evbit);
- set_bit(EV_REP, input_dev.evbit);
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ input_dev->name = "DVB on-card IR receiver";
+
+ set_bit(EV_KEY, input_dev->evbit);
+ set_bit(EV_REP, input_dev->evbit);
input_register_keys();
- input_register_device(&input_dev);
- input_dev.timer.function = input_repeat_key;
+ input_register_device(input_dev);
+ input_dev->timer.function = input_repeat_key;
e = create_proc_entry("av7110_ir", S_IFREG | S_IRUGO | S_IWUSR, NULL);
if (e) {
@@ -256,7 +261,7 @@
if (av_cnt == 1) {
del_timer_sync(&keyup_timer);
remove_proc_entry("av7110_ir", NULL);
- input_unregister_device(&input_dev);
+ input_unregister_device(input_dev);
}
av_cnt--;
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 2980db3..51c30ba 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -64,7 +64,7 @@
struct budget_ci {
struct budget budget;
- struct input_dev input_dev;
+ struct input_dev *input_dev;
struct tasklet_struct msp430_irq_tasklet;
struct tasklet_struct ciintf_irq_tasklet;
int slot_status;
@@ -145,7 +145,7 @@
static void msp430_ir_interrupt(unsigned long data)
{
struct budget_ci *budget_ci = (struct budget_ci *) data;
- struct input_dev *dev = &budget_ci->input_dev;
+ struct input_dev *dev = budget_ci->input_dev;
unsigned int code =
ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
@@ -181,25 +181,27 @@
static int msp430_ir_init(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
+ struct input_dev *input_dev;
int i;
- memset(&budget_ci->input_dev, 0, sizeof(struct input_dev));
+ budget_ci->input_dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
sprintf(budget_ci->ir_dev_name, "Budget-CI dvb ir receiver %s", saa->name);
- budget_ci->input_dev.name = budget_ci->ir_dev_name;
- set_bit(EV_KEY, budget_ci->input_dev.evbit);
+ input_dev->name = budget_ci->ir_dev_name;
- for (i = 0; i < sizeof(key_map) / sizeof(*key_map); i++)
+ set_bit(EV_KEY, input_dev->evbit);
+ for (i = 0; i < ARRAY_SIZE(key_map); i++)
if (key_map[i])
- set_bit(key_map[i], budget_ci->input_dev.keybit);
+ set_bit(key_map[i], input_dev->keybit);
- input_register_device(&budget_ci->input_dev);
+ input_register_device(budget_ci->input_dev);
- budget_ci->input_dev.timer.function = msp430_ir_debounce;
+ input_dev->timer.function = msp430_ir_debounce;
saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_06);
-
saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI);
return 0;
@@ -208,7 +210,7 @@
static void msp430_ir_deinit(struct budget_ci *budget_ci)
{
struct saa7146_dev *saa = budget_ci->budget.dev;
- struct input_dev *dev = &budget_ci->input_dev;
+ struct input_dev *dev = budget_ci->input_dev;
saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_06);
saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 3d08fc8..832d179 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -152,7 +152,8 @@
struct list_head filter_info_list;
spinlock_t filter_info_list_lock;
- struct input_dev rc_input_dev;
+ struct input_dev *rc_input_dev;
+ char rc_phys[64];
int active; /* Loaded successfully */
};
@@ -235,9 +236,9 @@
* this should/could be added later ...
* for now lets report each signal as a key down and up*/
dprintk("%s:rc signal:%d\n", __FUNCTION__, buffer[4]);
- input_report_key(&dec->rc_input_dev,rc_keys[buffer[4]-1],1);
- input_report_key(&dec->rc_input_dev,rc_keys[buffer[4]-1],0);
- input_sync(&dec->rc_input_dev);
+ input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 1);
+ input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 0);
+ input_sync(dec->rc_input_dev);
}
exit: retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -1181,29 +1182,38 @@
(unsigned long)dec);
}
-static void ttusb_init_rc( struct ttusb_dec *dec)
+static int ttusb_init_rc(struct ttusb_dec *dec)
{
+ struct input_dev *input_dev;
u8 b[] = { 0x00, 0x01 };
int i;
- init_input_dev(&dec->rc_input_dev);
+ usb_make_path(dec->udev, dec->rc_phys, sizeof(dec->rc_phys));
+ strlcpy(dec->rc_phys, "/input0", sizeof(dec->rc_phys));
- dec->rc_input_dev.name = "ttusb_dec remote control";
- dec->rc_input_dev.evbit[0] = BIT(EV_KEY);
- dec->rc_input_dev.keycodesize = sizeof(u16);
- dec->rc_input_dev.keycodemax = 0x1a;
- dec->rc_input_dev.keycode = rc_keys;
+ dec->rc_input_dev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
- for (i = 0; i < sizeof(rc_keys)/sizeof(rc_keys[0]); i++)
- set_bit(rc_keys[i], dec->rc_input_dev.keybit);
+ input_dev->name = "ttusb_dec remote control";
+ input_dev->phys = dec->rc_phys;
+ input_dev->evbit[0] = BIT(EV_KEY);
+ input_dev->keycodesize = sizeof(u16);
+ input_dev->keycodemax = 0x1a;
+ input_dev->keycode = rc_keys;
- input_register_device(&dec->rc_input_dev);
+ for (i = 0; i < ARRAY_SIZE(rc_keys); i++)
+ set_bit(rc_keys[i], input_dev->keybit);
- if(usb_submit_urb(dec->irq_urb,GFP_KERNEL)) {
+ input_register_device(input_dev);
+
+ if (usb_submit_urb(dec->irq_urb, GFP_KERNEL))
printk("%s: usb_submit_urb failed\n",__FUNCTION__);
- }
+
/* enable irq pipe */
ttusb_dec_send_command(dec,0xb0,sizeof(b),b,NULL,NULL);
+
+ return 0;
}
static void ttusb_dec_init_v_pes(struct ttusb_dec *dec)
@@ -1513,7 +1523,7 @@
* As the irq is submitted after the interface is changed,
* this is the best method i figured out.
* Any others?*/
- if(dec->interface == TTUSB_DEC_INTERFACE_IN)
+ if (dec->interface == TTUSB_DEC_INTERFACE_IN)
usb_kill_urb(dec->irq_urb);
usb_free_urb(dec->irq_urb);
@@ -1521,7 +1531,10 @@
usb_buffer_free(dec->udev,IRQ_PACKET_SIZE,
dec->irq_buffer, dec->irq_dma_handle);
- input_unregister_device(&dec->rc_input_dev);
+ if (dec->rc_input_dev) {
+ input_unregister_device(dec->rc_input_dev);
+ dec->rc_input_dev = NULL;
+ }
}
@@ -1659,7 +1672,7 @@
ttusb_dec_set_interface(dec, TTUSB_DEC_INTERFACE_IN);
- if(enable_rc)
+ if (enable_rc)
ttusb_init_rc(dec);
return 0;
diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h
index 7a312f7..e0e7c7a 100644
--- a/drivers/media/video/bttvp.h
+++ b/drivers/media/video/bttvp.h
@@ -240,7 +240,7 @@
/* for gpio-connected remote control */
struct bttv_input {
- struct input_dev dev;
+ struct input_dev *dev;
struct ir_input_state ir;
char name[32];
char phys[32];
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index d81b21d..c27fe4c3 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -260,7 +260,7 @@
struct cx88_IR {
struct cx88_core *core;
- struct input_dev input;
+ struct input_dev *input;
struct ir_input_state ir;
char name[32];
char phys[32];
@@ -315,23 +315,23 @@
if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown) {
- ir_input_keydown(&ir->input, &ir->ir, data, data);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->input, &ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
}
} else if (ir->mask_keyup) {
/* bit cleared on keydown */
if (0 == (gpio & ir->mask_keyup)) {
- ir_input_keydown(&ir->input, &ir->ir, data, data);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->input, &ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
}
} else {
/* can't distinguish keydown/up :-/ */
- ir_input_keydown(&ir->input, &ir->ir, data, data);
- ir_input_nokey(&ir->input, &ir->ir);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
+ ir_input_nokey(ir->input, &ir->ir);
}
}
@@ -357,13 +357,19 @@
int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
{
struct cx88_IR *ir;
+ struct input_dev *input_dev;
IR_KEYTAB_TYPE *ir_codes = NULL;
int ir_type = IR_TYPE_OTHER;
- ir = kmalloc(sizeof(*ir), GFP_KERNEL);
- if (NULL == ir)
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev) {
+ kfree(ir);
+ input_free_device(input_dev);
return -ENOMEM;
- memset(ir, 0, sizeof(*ir));
+ }
+
+ ir->input = input_dev;
/* detect & configure */
switch (core->board) {
@@ -425,6 +431,7 @@
if (NULL == ir_codes) {
kfree(ir);
+ input_free_device(input_dev);
return -ENODEV;
}
@@ -433,19 +440,19 @@
cx88_boards[core->board].name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
- ir_input_init(&ir->input, &ir->ir, ir_type, ir_codes);
- ir->input.name = ir->name;
- ir->input.phys = ir->phys;
- ir->input.id.bustype = BUS_PCI;
- ir->input.id.version = 1;
+ ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ input_dev->name = ir->name;
+ input_dev->phys = ir->phys;
+ input_dev->id.bustype = BUS_PCI;
+ input_dev->id.version = 1;
if (pci->subsystem_vendor) {
- ir->input.id.vendor = pci->subsystem_vendor;
- ir->input.id.product = pci->subsystem_device;
+ input_dev->id.vendor = pci->subsystem_vendor;
+ input_dev->id.product = pci->subsystem_device;
} else {
- ir->input.id.vendor = pci->vendor;
- ir->input.id.product = pci->device;
+ input_dev->id.vendor = pci->vendor;
+ input_dev->id.product = pci->device;
}
- ir->input.dev = &pci->dev;
+ input_dev->cdev.dev = &pci->dev;
/* record handles to ourself */
ir->core = core;
@@ -465,8 +472,7 @@
}
/* all done */
- input_register_device(&ir->input);
- printk("%s: registered IR remote control\n", core->name);
+ input_register_device(ir->input);
return 0;
}
@@ -484,7 +490,7 @@
flush_scheduled_work();
}
- input_unregister_device(&ir->input);
+ input_unregister_device(ir->input);
kfree(ir);
/* done */
@@ -515,7 +521,7 @@
if (!ir->scount) {
/* nothing to sample */
if (ir->ir.keypressed && time_after(jiffies, ir->release))
- ir_input_nokey(&ir->input, &ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
return;
}
@@ -557,7 +563,7 @@
ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0x7f);
- ir_input_keydown(&ir->input, &ir->ir, (ircode >> 16) & 0x7f, (ircode >> 16) & 0xff);
+ ir_input_keydown(ir->input, &ir->ir, (ircode >> 16) & 0x7f, (ircode >> 16) & 0xff);
ir->release = jiffies + msecs_to_jiffies(120);
break;
case CX88_BOARD_HAUPPAUGE:
@@ -566,7 +572,7 @@
ir_dprintk("biphase decoded: %x\n", ircode);
if ((ircode & 0xfffff000) != 0x3000)
break;
- ir_input_keydown(&ir->input, &ir->ir, ircode & 0x3f, ircode);
+ ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f, ircode);
ir->release = jiffies + msecs_to_jiffies(120);
break;
}
diff --git a/drivers/media/video/ir-kbd-gpio.c b/drivers/media/video/ir-kbd-gpio.c
index cf292da..234151e 100644
--- a/drivers/media/video/ir-kbd-gpio.c
+++ b/drivers/media/video/ir-kbd-gpio.c
@@ -158,7 +158,7 @@
struct IR {
struct bttv_sub_device *sub;
- struct input_dev input;
+ struct input_dev *input;
struct ir_input_state ir;
char name[32];
char phys[32];
@@ -217,23 +217,23 @@
if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown) {
- ir_input_keydown(&ir->input,&ir->ir,data,data);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->input,&ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
}
} else if (ir->mask_keyup) {
/* bit cleared on keydown */
if (0 == (gpio & ir->mask_keyup)) {
- ir_input_keydown(&ir->input,&ir->ir,data,data);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->input,&ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
}
} else {
/* can't disturgissh keydown/up :-/ */
- ir_input_keydown(&ir->input,&ir->ir,data,data);
- ir_input_nokey(&ir->input,&ir->ir);
+ ir_input_keydown(ir->input, &ir->ir, data, data);
+ ir_input_nokey(ir->input, &ir->ir);
}
}
@@ -268,13 +268,17 @@
{
struct bttv_sub_device *sub = to_bttv_sub_dev(dev);
struct IR *ir;
+ struct input_dev *input_dev;
IR_KEYTAB_TYPE *ir_codes = NULL;
int ir_type = IR_TYPE_OTHER;
- ir = kmalloc(sizeof(*ir),GFP_KERNEL);
- if (NULL == ir)
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev) {
+ kfree(ir);
+ input_free_device(input_dev);
return -ENOMEM;
- memset(ir,0,sizeof(*ir));
+ }
/* detect & configure */
switch (sub->core->type) {
@@ -328,6 +332,7 @@
}
if (NULL == ir_codes) {
kfree(ir);
+ input_free_device(input_dev);
return -ENODEV;
}
@@ -341,19 +346,19 @@
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(sub->core->pci));
- ir_input_init(&ir->input, &ir->ir, ir_type, ir_codes);
- ir->input.name = ir->name;
- ir->input.phys = ir->phys;
- ir->input.id.bustype = BUS_PCI;
- ir->input.id.version = 1;
+ ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ input_dev->name = ir->name;
+ input_dev->phys = ir->phys;
+ input_dev->id.bustype = BUS_PCI;
+ input_dev->id.version = 1;
if (sub->core->pci->subsystem_vendor) {
- ir->input.id.vendor = sub->core->pci->subsystem_vendor;
- ir->input.id.product = sub->core->pci->subsystem_device;
+ input_dev->id.vendor = sub->core->pci->subsystem_vendor;
+ input_dev->id.product = sub->core->pci->subsystem_device;
} else {
- ir->input.id.vendor = sub->core->pci->vendor;
- ir->input.id.product = sub->core->pci->device;
+ input_dev->id.vendor = sub->core->pci->vendor;
+ input_dev->id.product = sub->core->pci->device;
}
- ir->input.dev = &sub->core->pci->dev;
+ input_dev->cdev.dev = &sub->core->pci->dev;
if (ir->polling) {
INIT_WORK(&ir->work, ir_work, ir);
@@ -364,9 +369,8 @@
}
/* all done */
- dev_set_drvdata(dev,ir);
- input_register_device(&ir->input);
- printk(DEVNAME ": %s detected at %s\n",ir->input.name,ir->input.phys);
+ dev_set_drvdata(dev, ir);
+ input_register_device(ir->input);
return 0;
}
@@ -380,7 +384,7 @@
flush_scheduled_work();
}
- input_unregister_device(&ir->input);
+ input_unregister_device(ir->input);
kfree(ir);
return 0;
}
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 67105b9..9703d3d 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -121,10 +121,9 @@
};
-struct IR;
struct IR {
struct i2c_client c;
- struct input_dev input;
+ struct input_dev *input;
struct ir_input_state ir;
struct work_struct work;
@@ -271,9 +270,9 @@
}
if (0 == rc) {
- ir_input_nokey(&ir->input,&ir->ir);
+ ir_input_nokey(ir->input, &ir->ir);
} else {
- ir_input_keydown(&ir->input,&ir->ir, ir_key, ir_raw);
+ ir_input_keydown(ir->input, &ir->ir, ir_key, ir_raw);
}
}
@@ -318,11 +317,18 @@
char *name;
int ir_type;
struct IR *ir;
+ struct input_dev *input_dev;
- if (NULL == (ir = kmalloc(sizeof(struct IR),GFP_KERNEL)))
+ ir = kzalloc(sizeof(struct IR), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev) {
+ kfree(ir);
+ input_free_device(input_dev);
return -ENOMEM;
- memset(ir,0,sizeof(*ir));
+ }
+
ir->c = client_template;
+ ir->input = input_dev;
i2c_set_clientdata(&ir->c, ir);
ir->c.adapter = adap;
@@ -375,13 +381,12 @@
ir->c.dev.bus_id);
/* init + register input device */
- ir_input_init(&ir->input,&ir->ir,ir_type,ir_codes);
- ir->input.id.bustype = BUS_I2C;
- ir->input.name = ir->c.name;
- ir->input.phys = ir->phys;
- input_register_device(&ir->input);
- printk(DEVNAME ": %s detected at %s [%s]\n",
- ir->input.name,ir->input.phys,adap->name);
+ ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->name = ir->c.name;
+ input_dev->phys = ir->phys;
+
+ input_register_device(ir->input);
/* start polling via eventd */
INIT_WORK(&ir->work, ir_work, ir);
@@ -402,7 +407,7 @@
flush_scheduled_work();
/* unregister devices */
- input_unregister_device(&ir->input);
+ input_unregister_device(ir->input);
i2c_detach_client(&ir->c);
/* free memory */
diff --git a/drivers/media/video/msp3400.c b/drivers/media/video/msp3400.c
index f0d43fc..262890c 100644
--- a/drivers/media/video/msp3400.c
+++ b/drivers/media/video/msp3400.c
@@ -1420,8 +1420,8 @@
static int msp_probe(struct i2c_adapter *adap);
static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg);
-static int msp_suspend(struct device * dev, pm_message_t state, u32 level);
-static int msp_resume(struct device * dev, u32 level);
+static int msp_suspend(struct device * dev, pm_message_t state);
+static int msp_resume(struct device * dev);
static void msp_wake_thread(struct i2c_client *client);
@@ -1821,7 +1821,7 @@
return 0;
}
-static int msp_suspend(struct device * dev, pm_message_t state, u32 level)
+static int msp_suspend(struct device * dev, pm_message_t state)
{
struct i2c_client *c = container_of(dev, struct i2c_client, dev);
@@ -1830,7 +1830,7 @@
return 0;
}
-static int msp_resume(struct device * dev, u32 level)
+static int msp_resume(struct device * dev)
{
struct i2c_client *c = container_of(dev, struct i2c_client, dev);
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 1f456c4..242cb23 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -425,9 +425,9 @@
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- ir_input_keydown(&ir->dev,&ir->ir,data,data);
+ ir_input_keydown(ir->dev, &ir->ir, data, data);
} else {
- ir_input_nokey(&ir->dev,&ir->ir);
+ ir_input_nokey(ir->dev, &ir->ir);
}
return 0;
}
@@ -456,6 +456,7 @@
int saa7134_input_init1(struct saa7134_dev *dev)
{
struct saa7134_ir *ir;
+ struct input_dev *input_dev;
IR_KEYTAB_TYPE *ir_codes = NULL;
u32 mask_keycode = 0;
u32 mask_keydown = 0;
@@ -535,10 +536,13 @@
return -ENODEV;
}
- ir = kmalloc(sizeof(*ir),GFP_KERNEL);
- if (NULL == ir)
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev) {
+ kfree(ir);
+ input_free_device(input_dev);
return -ENOMEM;
- memset(ir,0,sizeof(*ir));
+ }
/* init hardware-specific stuff */
ir->mask_keycode = mask_keycode;
@@ -552,19 +556,19 @@
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(dev->pci));
- ir_input_init(&ir->dev, &ir->ir, ir_type, ir_codes);
- ir->dev.name = ir->name;
- ir->dev.phys = ir->phys;
- ir->dev.id.bustype = BUS_PCI;
- ir->dev.id.version = 1;
+ ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ input_dev->name = ir->name;
+ input_dev->phys = ir->phys;
+ input_dev->id.bustype = BUS_PCI;
+ input_dev->id.version = 1;
if (dev->pci->subsystem_vendor) {
- ir->dev.id.vendor = dev->pci->subsystem_vendor;
- ir->dev.id.product = dev->pci->subsystem_device;
+ input_dev->id.vendor = dev->pci->subsystem_vendor;
+ input_dev->id.product = dev->pci->subsystem_device;
} else {
- ir->dev.id.vendor = dev->pci->vendor;
- ir->dev.id.product = dev->pci->device;
+ input_dev->id.vendor = dev->pci->vendor;
+ input_dev->id.product = dev->pci->device;
}
- ir->dev.dev = &dev->pci->dev;
+ input_dev->cdev.dev = &dev->pci->dev;
/* all done */
dev->remote = ir;
@@ -576,8 +580,7 @@
add_timer(&ir->timer);
}
- input_register_device(&dev->remote->dev);
- printk("%s: registered input device for IR\n",dev->name);
+ input_register_device(ir->dev);
return 0;
}
@@ -586,9 +589,9 @@
if (NULL == dev->remote)
return;
- input_unregister_device(&dev->remote->dev);
if (dev->remote->polling)
del_timer_sync(&dev->remote->timer);
+ input_unregister_device(dev->remote->dev);
kfree(dev->remote);
dev->remote = NULL;
}
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index 3ea0914..860b895 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -351,7 +351,7 @@
/* IR input */
struct saa7134_ir {
- struct input_dev dev;
+ struct input_dev *dev;
struct ir_input_state ir;
char name[32];
char phys[32];
diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index 0456dda..94053f1 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -784,13 +784,13 @@
return 0;
}
-static int tda9887_suspend(struct device * dev, pm_message_t state, u32 level)
+static int tda9887_suspend(struct device * dev, pm_message_t state)
{
dprintk("tda9887: suspend\n");
return 0;
}
-static int tda9887_resume(struct device * dev, u32 level)
+static int tda9887_resume(struct device * dev)
{
struct i2c_client *c = container_of(dev, struct i2c_client, dev);
struct tda9887 *t = i2c_get_clientdata(c);
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 0557202..ad85bef 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -697,7 +697,7 @@
return 0;
}
-static int tuner_suspend(struct device *dev, pm_message_t state, u32 level)
+static int tuner_suspend(struct device *dev, pm_message_t state)
{
struct i2c_client *c = container_of (dev, struct i2c_client, dev);
struct tuner *t = i2c_get_clientdata (c);
@@ -707,7 +707,7 @@
return 0;
}
-static int tuner_resume(struct device *dev, u32 level)
+static int tuner_resume(struct device *dev)
{
struct i2c_client *c = container_of (dev, struct i2c_client, dev);
struct tuner *t = i2c_get_clientdata (c);
diff --git a/drivers/message/i2o/core.h b/drivers/message/i2o/core.h
index c5bcfd7..9eefedb 100644
--- a/drivers/message/i2o/core.h
+++ b/drivers/message/i2o/core.h
@@ -36,9 +36,6 @@
extern void i2o_device_remove(struct i2o_device *);
extern int i2o_device_parse_lct(struct i2o_controller *);
-extern int i2o_device_init(void);
-extern void i2o_device_exit(void);
-
/* IOP */
extern struct i2o_controller *i2o_iop_alloc(void);
extern void i2o_iop_free(struct i2o_controller *);
diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c
index 21f16ba..d987996 100644
--- a/drivers/message/i2o/device.c
+++ b/drivers/message/i2o/device.c
@@ -45,10 +45,10 @@
writel(type, &msg->body[0]);
return i2o_msg_post_wait(dev->iop, m, 60);
-};
+}
/**
- * i2o_device_claim - claim a device for use by an OSM
+ * i2o_device_claim - claim a device for use by an OSM
* @dev: I2O device to claim
* @drv: I2O driver which wants to claim the device
*
@@ -73,7 +73,7 @@
up(&dev->lock);
return rc;
-};
+}
/**
* i2o_device_claim_release - release a device that the OSM is using
@@ -119,7 +119,8 @@
up(&dev->lock);
return rc;
-};
+}
+
/**
* i2o_device_release - release the memory for a I2O device
@@ -135,39 +136,47 @@
pr_debug("i2o: device %s released\n", dev->bus_id);
kfree(i2o_dev);
-};
+}
+
/**
- * i2o_device_class_release - Remove I2O device attributes
- * @cd: I2O class device which is added to the I2O device class
+ * i2o_device_class_show_class_id - Displays class id of I2O device
+ * @cd: class device of which the class id should be displayed
+ * @buf: buffer into which the class id should be printed
*
- * Removes attributes from the I2O device again. Also search each device
- * on the controller for I2O devices which refert to this device as parent
- * or user and remove this links also.
+ * Returns the number of bytes which are printed into the buffer.
*/
-static void i2o_device_class_release(struct class_device *cd)
+static ssize_t i2o_device_show_class_id(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
{
- struct i2o_device *i2o_dev, *tmp;
- struct i2o_controller *c;
+ struct i2o_device *i2o_dev = to_i2o_device(dev);
- i2o_dev = to_i2o_device(cd->dev);
- c = i2o_dev->iop;
+ sprintf(buf, "0x%03x\n", i2o_dev->lct_data.class_id);
+ return strlen(buf) + 1;
+}
- sysfs_remove_link(&i2o_dev->device.kobj, "parent");
- sysfs_remove_link(&i2o_dev->device.kobj, "user");
+/**
+ * i2o_device_class_show_tid - Displays TID of I2O device
+ * @cd: class device of which the TID should be displayed
+ * @buf: buffer into which the class id should be printed
+ *
+ * Returns the number of bytes which are printed into the buffer.
+ */
+static ssize_t i2o_device_show_tid(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct i2o_device *i2o_dev = to_i2o_device(dev);
- list_for_each_entry(tmp, &c->devices, list) {
- if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
- sysfs_remove_link(&tmp->device.kobj, "parent");
- if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
- sysfs_remove_link(&tmp->device.kobj, "user");
- }
-};
+ sprintf(buf, "0x%03x\n", i2o_dev->lct_data.tid);
+ return strlen(buf) + 1;
+}
-/* I2O device class */
-static struct class i2o_device_class = {
- .name = "i2o_device",
- .release = i2o_device_class_release
+struct device_attribute i2o_device_attrs[] = {
+ __ATTR(class_id, S_IRUGO, i2o_device_show_class_id, NULL),
+ __ATTR(tid, S_IRUGO, i2o_device_show_tid, NULL),
+ __ATTR_NULL
};
/**
@@ -193,11 +202,69 @@
dev->device.bus = &i2o_bus_type;
dev->device.release = &i2o_device_release;
- dev->classdev.class = &i2o_device_class;
- dev->classdev.dev = &dev->device;
return dev;
-};
+}
+
+/**
+ * i2o_setup_sysfs_links - Adds attributes to the I2O device
+ * @cd: I2O class device which is added to the I2O device class
+ *
+ * This function get called when a I2O device is added to the class. It
+ * creates the attributes for each device and creates user/parent symlink
+ * if necessary.
+ *
+ * Returns 0 on success or negative error code on failure.
+ */
+static void i2o_setup_sysfs_links(struct i2o_device *i2o_dev)
+{
+ struct i2o_controller *c = i2o_dev->iop;
+ struct i2o_device *tmp;
+
+ /* create user entries for this device */
+ tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid);
+ if (tmp && tmp != i2o_dev)
+ sysfs_create_link(&i2o_dev->device.kobj,
+ &tmp->device.kobj, "user");
+
+ /* create user entries refering to this device */
+ list_for_each_entry(tmp, &c->devices, list)
+ if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid &&
+ tmp != i2o_dev)
+ sysfs_create_link(&tmp->device.kobj,
+ &i2o_dev->device.kobj, "user");
+
+ /* create parent entries for this device */
+ tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid);
+ if (tmp && tmp != i2o_dev)
+ sysfs_create_link(&i2o_dev->device.kobj,
+ &tmp->device.kobj, "parent");
+
+ /* create parent entries refering to this device */
+ list_for_each_entry(tmp, &c->devices, list)
+ if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid &&
+ tmp != i2o_dev)
+ sysfs_create_link(&tmp->device.kobj,
+ &i2o_dev->device.kobj, "parent");
+}
+
+static void i2o_remove_sysfs_links(struct i2o_device *i2o_dev)
+{
+ struct i2o_controller *c = i2o_dev->iop;
+ struct i2o_device *tmp;
+
+ sysfs_remove_link(&i2o_dev->device.kobj, "parent");
+ sysfs_remove_link(&i2o_dev->device.kobj, "user");
+
+ list_for_each_entry(tmp, &c->devices, list) {
+ if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
+ sysfs_remove_link(&tmp->device.kobj, "parent");
+ if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
+ sysfs_remove_link(&tmp->device.kobj, "user");
+ }
+}
+
+
/**
* i2o_device_add - allocate a new I2O device and add it to the IOP
@@ -222,28 +289,25 @@
}
dev->lct_data = *entry;
+ dev->iop = c;
snprintf(dev->device.bus_id, BUS_ID_SIZE, "%d:%03x", c->unit,
dev->lct_data.tid);
- snprintf(dev->classdev.class_id, BUS_ID_SIZE, "%d:%03x", c->unit,
- dev->lct_data.tid);
-
- dev->iop = c;
dev->device.parent = &c->device;
device_register(&dev->device);
list_add_tail(&dev->list, &c->devices);
- class_device_register(&dev->classdev);
+ i2o_setup_sysfs_links(dev);
i2o_driver_notify_device_add_all(dev);
pr_debug("i2o: device %s added\n", dev->device.bus_id);
return dev;
-};
+}
/**
* i2o_device_remove - remove an I2O device from the I2O core
@@ -256,10 +320,10 @@
void i2o_device_remove(struct i2o_device *i2o_dev)
{
i2o_driver_notify_device_remove_all(i2o_dev);
- class_device_unregister(&i2o_dev->classdev);
+ i2o_remove_sysfs_links(i2o_dev);
list_del(&i2o_dev->list);
device_unregister(&i2o_dev->device);
-};
+}
/**
* i2o_device_parse_lct - Parse a previously fetched LCT and create devices
@@ -337,99 +401,8 @@
up(&c->lct_lock);
return 0;
-};
+}
-/**
- * i2o_device_class_show_class_id - Displays class id of I2O device
- * @cd: class device of which the class id should be displayed
- * @buf: buffer into which the class id should be printed
- *
- * Returns the number of bytes which are printed into the buffer.
- */
-static ssize_t i2o_device_class_show_class_id(struct class_device *cd,
- char *buf)
-{
- struct i2o_device *dev = to_i2o_device(cd->dev);
-
- sprintf(buf, "0x%03x\n", dev->lct_data.class_id);
- return strlen(buf) + 1;
-};
-
-/**
- * i2o_device_class_show_tid - Displays TID of I2O device
- * @cd: class device of which the TID should be displayed
- * @buf: buffer into which the class id should be printed
- *
- * Returns the number of bytes which are printed into the buffer.
- */
-static ssize_t i2o_device_class_show_tid(struct class_device *cd, char *buf)
-{
- struct i2o_device *dev = to_i2o_device(cd->dev);
-
- sprintf(buf, "0x%03x\n", dev->lct_data.tid);
- return strlen(buf) + 1;
-};
-
-/* I2O device class attributes */
-static CLASS_DEVICE_ATTR(class_id, S_IRUGO, i2o_device_class_show_class_id,
- NULL);
-static CLASS_DEVICE_ATTR(tid, S_IRUGO, i2o_device_class_show_tid, NULL);
-
-/**
- * i2o_device_class_add - Adds attributes to the I2O device
- * @cd: I2O class device which is added to the I2O device class
- *
- * This function get called when a I2O device is added to the class. It
- * creates the attributes for each device and creates user/parent symlink
- * if necessary.
- *
- * Returns 0 on success or negative error code on failure.
- */
-static int i2o_device_class_add(struct class_device *cd)
-{
- struct i2o_device *i2o_dev, *tmp;
- struct i2o_controller *c;
-
- i2o_dev = to_i2o_device(cd->dev);
- c = i2o_dev->iop;
-
- class_device_create_file(cd, &class_device_attr_class_id);
- class_device_create_file(cd, &class_device_attr_tid);
-
- /* create user entries for this device */
- tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid);
- if (tmp && (tmp != i2o_dev))
- sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj,
- "user");
-
- /* create user entries refering to this device */
- list_for_each_entry(tmp, &c->devices, list)
- if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
- && (tmp != i2o_dev))
- sysfs_create_link(&tmp->device.kobj,
- &i2o_dev->device.kobj, "user");
-
- /* create parent entries for this device */
- tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid);
- if (tmp && (tmp != i2o_dev))
- sysfs_create_link(&i2o_dev->device.kobj, &tmp->device.kobj,
- "parent");
-
- /* create parent entries refering to this device */
- list_for_each_entry(tmp, &c->devices, list)
- if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
- && (tmp != i2o_dev))
- sysfs_create_link(&tmp->device.kobj,
- &i2o_dev->device.kobj, "parent");
-
- return 0;
-};
-
-/* I2O device class interface */
-static struct class_interface i2o_device_class_interface = {
- .class = &i2o_device_class,
- .add = i2o_device_class_add
-};
/*
* Run time support routines
@@ -553,11 +526,11 @@
}
/*
- * if oper == I2O_PARAMS_TABLE_GET, get from all rows
- * if fieldcount == -1 return all fields
+ * if oper == I2O_PARAMS_TABLE_GET, get from all rows
+ * if fieldcount == -1 return all fields
* ibuf and ibuflen are unused (use NULL, 0)
- * else return specific fields
- * ibuf contains fieldindexes
+ * else return specific fields
+ * ibuf contains fieldindexes
*
* if oper == I2O_PARAMS_LIST_GET, get from specific rows
* if fieldcount == -1 return all fields
@@ -602,35 +575,6 @@
return size;
}
-/**
- * i2o_device_init - Initialize I2O devices
- *
- * Registers the I2O device class.
- *
- * Returns 0 on success or negative error code on failure.
- */
-int i2o_device_init(void)
-{
- int rc;
-
- rc = class_register(&i2o_device_class);
- if (rc)
- return rc;
-
- return class_interface_register(&i2o_device_class_interface);
-};
-
-/**
- * i2o_device_exit - I2O devices exit function
- *
- * Unregisters the I2O device class.
- */
-void i2o_device_exit(void)
-{
- class_interface_register(&i2o_device_class_interface);
- class_unregister(&i2o_device_class);
-};
-
EXPORT_SYMBOL(i2o_device_claim);
EXPORT_SYMBOL(i2o_device_claim_release);
EXPORT_SYMBOL(i2o_parm_field_get);
diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c
index 739bfde..0079a4b 100644
--- a/drivers/message/i2o/driver.c
+++ b/drivers/message/i2o/driver.c
@@ -58,9 +58,12 @@
};
/* I2O bus type */
+extern struct device_attribute i2o_device_attrs[];
+
struct bus_type i2o_bus_type = {
.name = "i2o",
.match = i2o_bus_match,
+ .dev_attrs = i2o_device_attrs,
};
/**
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index 42f8b81..361da8d 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -833,6 +833,7 @@
list_for_each_entry_safe(dev, tmp, &c->devices, list)
i2o_device_remove(dev);
+ class_device_unregister(c->classdev);
device_del(&c->device);
/* Ask the IOP to switch to RESET state */
@@ -1077,9 +1078,7 @@
};
/* I2O controller class */
-static struct class i2o_controller_class = {
- .name = "i2o_controller",
-};
+static struct class *i2o_controller_class;
/**
* i2o_iop_alloc - Allocate and initialize a i2o_controller struct
@@ -1110,14 +1109,10 @@
sprintf(c->name, "iop%d", c->unit);
device_initialize(&c->device);
- class_device_initialize(&c->classdev);
c->device.release = &i2o_iop_release;
- c->classdev.class = &i2o_controller_class;
- c->classdev.dev = &c->device;
snprintf(c->device.bus_id, BUS_ID_SIZE, "iop%d", c->unit);
- snprintf(c->classdev.class_id, BUS_ID_SIZE, "iop%d", c->unit);
#if BITS_PER_LONG == 64
spin_lock_init(&c->context_list_lock);
@@ -1146,7 +1141,9 @@
goto iop_reset;
}
- if ((rc = class_device_add(&c->classdev))) {
+ c->classdev = class_device_create(i2o_controller_class, NULL, MKDEV(0,0),
+ &c->device, "iop%d", c->unit);
+ if (IS_ERR(c->classdev)) {
osm_err("%s: could not add controller class\n", c->name);
goto device_del;
}
@@ -1184,7 +1181,7 @@
return 0;
class_del:
- class_device_del(&c->classdev);
+ class_device_unregister(c->classdev);
device_del:
device_del(&c->device);
@@ -1246,13 +1243,10 @@
printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n");
- rc = i2o_device_init();
- if (rc)
- goto exit;
-
- if ((rc = class_register(&i2o_controller_class))) {
+ i2o_controller_class = class_create(THIS_MODULE, "i2o_controller");
+ if (IS_ERR(i2o_controller_class)) {
osm_err("can't register class i2o_controller\n");
- goto device_exit;
+ goto exit;
}
if ((rc = i2o_driver_init()))
@@ -1273,10 +1267,7 @@
i2o_driver_exit();
class_exit:
- class_unregister(&i2o_controller_class);
-
- device_exit:
- i2o_device_exit();
+ class_destroy(i2o_controller_class);
exit:
return rc;
@@ -1292,8 +1283,7 @@
i2o_pci_exit();
i2o_exec_exit();
i2o_driver_exit();
- class_unregister(&i2o_controller_class);
- i2o_device_exit();
+ class_destroy(i2o_controller_class);
};
module_init(i2o_iop_init);
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index e9806fb..720e7a3 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -219,26 +219,24 @@
return 0;
}
-static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state, u32 level)
+static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state)
{
struct mcp *mcp = dev_get_drvdata(dev);
- if (level == SUSPEND_DISABLE) {
- priv(mcp)->mccr0 = Ser4MCCR0;
- priv(mcp)->mccr1 = Ser4MCCR1;
- Ser4MCCR0 &= ~MCCR0_MCE;
- }
+ priv(mcp)->mccr0 = Ser4MCCR0;
+ priv(mcp)->mccr1 = Ser4MCCR1;
+ Ser4MCCR0 &= ~MCCR0_MCE;
+
return 0;
}
-static int mcp_sa11x0_resume(struct device *dev, u32 level)
+static int mcp_sa11x0_resume(struct device *dev)
{
struct mcp *mcp = dev_get_drvdata(dev);
- if (level == RESUME_RESTORE_STATE) {
- Ser4MCCR1 = priv(mcp)->mccr1;
- Ser4MCCR0 = priv(mcp)->mccr0;
- }
+ Ser4MCCR1 = priv(mcp)->mccr1;
+ Ser4MCCR0 = priv(mcp)->mccr0;
+
return 0;
}
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index a260f83..585cded 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -40,7 +40,7 @@
struct ucb1x00_ts {
- struct input_dev idev;
+ struct input_dev *idev;
struct ucb1x00 *ucb;
wait_queue_head_t irq_wait;
@@ -56,16 +56,16 @@
static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y)
{
- input_report_abs(&ts->idev, ABS_X, x);
- input_report_abs(&ts->idev, ABS_Y, y);
- input_report_abs(&ts->idev, ABS_PRESSURE, pressure);
- input_sync(&ts->idev);
+ input_report_abs(ts->idev, ABS_X, x);
+ input_report_abs(ts->idev, ABS_Y, y);
+ input_report_abs(ts->idev, ABS_PRESSURE, pressure);
+ input_sync(ts->idev);
}
static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts)
{
- input_report_abs(&ts->idev, ABS_PRESSURE, 0);
- input_sync(&ts->idev);
+ input_report_abs(ts->idev, ABS_PRESSURE, 0);
+ input_sync(ts->idev);
}
/*
@@ -341,26 +341,30 @@
{
struct ucb1x00_ts *ts;
- ts = kmalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL);
+ ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL);
if (!ts)
return -ENOMEM;
- memset(ts, 0, sizeof(struct ucb1x00_ts));
+ ts->idev = input_allocate_device();
+ if (!ts->idev) {
+ kfree(ts);
+ return -ENOMEM;
+ }
ts->ucb = dev->ucb;
ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
- ts->idev.name = "Touchscreen panel";
- ts->idev.id.product = ts->ucb->id;
- ts->idev.open = ucb1x00_ts_open;
- ts->idev.close = ucb1x00_ts_close;
+ ts->idev->name = "Touchscreen panel";
+ ts->idev->id.product = ts->ucb->id;
+ ts->idev->open = ucb1x00_ts_open;
+ ts->idev->close = ucb1x00_ts_close;
- __set_bit(EV_ABS, ts->idev.evbit);
- __set_bit(ABS_X, ts->idev.absbit);
- __set_bit(ABS_Y, ts->idev.absbit);
- __set_bit(ABS_PRESSURE, ts->idev.absbit);
+ __set_bit(EV_ABS, ts->idev->evbit);
+ __set_bit(ABS_X, ts->idev->absbit);
+ __set_bit(ABS_Y, ts->idev->absbit);
+ __set_bit(ABS_PRESSURE, ts->idev->absbit);
- input_register_device(&ts->idev);
+ input_register_device(ts->idev);
dev->priv = ts;
@@ -370,7 +374,8 @@
static void ucb1x00_ts_remove(struct ucb1x00_dev *dev)
{
struct ucb1x00_ts *ts = dev->priv;
- input_unregister_device(&ts->idev);
+
+ input_unregister_device(ts->idev);
kfree(ts);
}
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index 91c7484..1e6bdba 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -24,6 +24,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/scatterlist.h>
+#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
#include <asm/mach/mmc.h>
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index b53af57..8eba373 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -571,23 +571,23 @@
}
#ifdef CONFIG_PM
-static int pxamci_suspend(struct device *dev, pm_message_t state, u32 level)
+static int pxamci_suspend(struct device *dev, pm_message_t state)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
int ret = 0;
- if (mmc && level == SUSPEND_DISABLE)
+ if (mmc)
ret = mmc_suspend_host(mmc, state);
return ret;
}
-static int pxamci_resume(struct device *dev, u32 level)
+static int pxamci_resume(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
int ret = 0;
- if (mmc && level == RESUME_ENABLE)
+ if (mmc)
ret = mmc_resume_host(mmc);
return ret;
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 3cbca7c..25f7ce7 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -1955,14 +1955,14 @@
*/
#ifdef CONFIG_PM
-static int wbsd_suspend(struct device *dev, pm_message_t state, u32 level)
+static int wbsd_suspend(struct device *dev, pm_message_t state)
{
DBGF("Not yet supported\n");
return 0;
}
-static int wbsd_resume(struct device *dev, u32 level)
+static int wbsd_resume(struct device *dev)
{
DBGF("Not yet supported\n");
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 8dcaa35..6a8e0ca 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -21,6 +21,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/concat.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <asm/mach/flash.h>
@@ -402,21 +403,21 @@
}
#ifdef CONFIG_PM
-static int sa1100_mtd_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sa1100_mtd_suspend(struct device *dev, pm_message_t state)
{
struct sa_info *info = dev_get_drvdata(dev);
int ret = 0;
- if (info && level == SUSPEND_SAVE_STATE)
+ if (info)
ret = info->mtd->suspend(info->mtd);
return ret;
}
-static int sa1100_mtd_resume(struct device *dev, u32 level)
+static int sa1100_mtd_resume(struct device *dev)
{
struct sa_info *info = dev_get_drvdata(dev);
- if (info && level == RESUME_RESTORE_STATE)
+ if (info)
info->mtd->resume(info->mtd);
return 0;
}
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 1ed602a..c534fd5 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -24,10 +24,10 @@
if (!mtd)
return;
- class_device_create(mtd_class, MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
+ class_device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2),
NULL, "mtd%d", mtd->index);
- class_device_create(mtd_class,
+ class_device_create(mtd_class, NULL,
MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1),
NULL, "mtd%dro", mtd->index);
}
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 54ab70e..6d4f9ce 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1374,7 +1374,7 @@
config CS89x0
tristate "CS89x0 support"
- depends on (NET_PCI && ISA) || ARCH_PNX0105 || ARCH_IXDP2X01
+ depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 || MACH_MP1000
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index c56d86d..3d50e95 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -29,6 +29,7 @@
#include <asm/system.h>
#include <asm/irq.h>
+#include <asm/hardware.h>
#include <asm/io.h>
#define TX_BUFFERS 15
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index a6078ad..bfdae10 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -182,6 +182,10 @@
#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
+#elif defined(CONFIG_MACH_MP1000)
+#include <asm/arch/mp1000-seprom.h>
+static unsigned int netcard_portlist[] __initdata = {MP1000_EIO_BASE+0x300, 0};
+static unsigned int cs8900_irq_map[] = {IRQ_EINT3,0,0,0};
#else
static unsigned int netcard_portlist[] __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
@@ -590,6 +594,10 @@
cnt -= j;
}
} else
+#elif defined(CONFIG_MACH_MP1000)
+ if (1) {
+ memcpy(dev->dev_addr, get_eeprom_mac_address(), ETH_ALEN);
+ } else
#endif
if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
@@ -649,6 +657,10 @@
if (1) {
printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n");
} else
+#elif defined(CONFIG_MACH_MP1000)
+ if (1) {
+ lp->force |= FORCE_RJ45;
+ } else
#endif
if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
@@ -1231,7 +1243,7 @@
else
#endif
{
-#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105)
+#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) && !defined(CONFIG_MACH_MP1000)
if (((1 << dev->irq) & lp->irq_map) == 0) {
printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);
diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h
index decea26..f19d1eb 100644
--- a/drivers/net/cs89x0.h
+++ b/drivers/net/cs89x0.h
@@ -16,7 +16,7 @@
#include <linux/config.h>
-#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105)
+#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) || defined (CONFIG_MACH_MP1000)
/* IXDP2401/IXDP2801 uses dword-aligned register addressing */
#define CS89x0_PORT(reg) ((reg) * 2)
#else
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index e54fc10..abce1f7 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -1140,11 +1140,11 @@
}
static int
-dm9000_drv_suspend(struct device *dev, pm_message_t state, u32 level)
+dm9000_drv_suspend(struct device *dev, pm_message_t state)
{
struct net_device *ndev = dev_get_drvdata(dev);
- if (ndev && level == SUSPEND_DISABLE) {
+ if (ndev) {
if (netif_running(ndev)) {
netif_device_detach(ndev);
dm9000_shutdown(ndev);
@@ -1154,12 +1154,12 @@
}
static int
-dm9000_drv_resume(struct device *dev, u32 level)
+dm9000_drv_resume(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
board_info_t *db = (board_info_t *) ndev->priv;
- if (ndev && level == RESUME_ENABLE) {
+ if (ndev) {
if (netif_running(ndev)) {
dm9000_reset(db);
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index ca591409..d54156f 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -400,5 +400,15 @@
To compile it as a module, choose M here: the module will be called
via-ircc.
+config PXA_FICP
+ tristate "Intel PXA2xx Internal FICP"
+ depends on ARCH_PXA && IRDA
+ help
+ Say Y or M here if you want to build support for the PXA2xx
+ built-in IRDA interface which can support both SIR and FIR.
+ This driver relies on platform specific helper routines so
+ available capabilities may vary from one PXA2xx target to
+ another.
+
endmenu
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 29a8bd8..e7a8b7f 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -18,6 +18,7 @@
obj-$(CONFIG_ALI_FIR) += ali-ircc.o
obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o
obj-$(CONFIG_VIA_FIR) += via-ircc.o
+obj-$(CONFIG_PXA_FICP) += pxaficp_ir.o
# Old dongle drivers for old SIR drivers
obj-$(CONFIG_ESI_DONGLE_OLD) += esi.o
obj-$(CONFIG_TEKRAM_DONGLE_OLD) += tekram.o
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
new file mode 100644
index 0000000..aef80f5
--- /dev/null
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -0,0 +1,871 @@
+/*
+ * linux/drivers/net/irda/pxaficp_ir.c
+ *
+ * Based on sa1100_ir.c by Russell King
+ *
+ * Changes copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Infra-red driver (SIR/FIR) for the PXA2xx embedded microprocessor
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/wrapper.h>
+#include <net/irda/irda_device.h>
+
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/delay.h>
+#include <asm/hardware.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/pxa-regs.h>
+
+#ifdef CONFIG_MACH_MAINSTONE
+#include <asm/arch/mainstone.h>
+#endif
+
+#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
+#define IrSR_RXPL_POS_IS_ZERO 0x0
+#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
+#define IrSR_TXPL_POS_IS_ZERO 0x0
+#define IrSR_XMODE_PULSE_1_6 (1<<2)
+#define IrSR_XMODE_PULSE_3_16 0x0
+#define IrSR_RCVEIR_IR_MODE (1<<1)
+#define IrSR_RCVEIR_UART_MODE 0x0
+#define IrSR_XMITIR_IR_MODE (1<<0)
+#define IrSR_XMITIR_UART_MODE 0x0
+
+#define IrSR_IR_RECEIVE_ON (\
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_IR_MODE | \
+ IrSR_XMITIR_UART_MODE)
+
+#define IrSR_IR_TRANSMIT_ON (\
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_UART_MODE | \
+ IrSR_XMITIR_IR_MODE)
+
+struct pxa_irda {
+ int speed;
+ int newspeed;
+ unsigned long last_oscr;
+
+ unsigned char *dma_rx_buff;
+ unsigned char *dma_tx_buff;
+ dma_addr_t dma_rx_buff_phy;
+ dma_addr_t dma_tx_buff_phy;
+ unsigned int dma_tx_buff_len;
+ int txdma;
+ int rxdma;
+
+ struct net_device_stats stats;
+ struct irlap_cb *irlap;
+ struct qos_info qos;
+
+ iobuff_t tx_buff;
+ iobuff_t rx_buff;
+
+ struct device *dev;
+ struct pxaficp_platform_data *pdata;
+};
+
+
+#define IS_FIR(si) ((si)->speed >= 4000000)
+#define IRDA_FRAME_SIZE_LIMIT 2047
+
+inline static void pxa_irda_fir_dma_rx_start(struct pxa_irda *si)
+{
+ DCSR(si->rxdma) = DCSR_NODESC;
+ DSADR(si->rxdma) = __PREG(ICDR);
+ DTADR(si->rxdma) = si->dma_rx_buff_phy;
+ DCMD(si->rxdma) = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_WIDTH1 | DCMD_BURST32 | IRDA_FRAME_SIZE_LIMIT;
+ DCSR(si->rxdma) |= DCSR_RUN;
+}
+
+inline static void pxa_irda_fir_dma_tx_start(struct pxa_irda *si)
+{
+ DCSR(si->txdma) = DCSR_NODESC;
+ DSADR(si->txdma) = si->dma_tx_buff_phy;
+ DTADR(si->txdma) = __PREG(ICDR);
+ DCMD(si->txdma) = DCMD_INCSRCADDR | DCMD_FLOWTRG | DCMD_ENDIRQEN | DCMD_WIDTH1 | DCMD_BURST32 | si->dma_tx_buff_len;
+ DCSR(si->txdma) |= DCSR_RUN;
+}
+
+/*
+ * Set the IrDA communications speed.
+ */
+static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
+{
+ unsigned long flags;
+ unsigned int divisor;
+
+ switch (speed) {
+ case 9600: case 19200: case 38400:
+ case 57600: case 115200:
+
+ /* refer to PXA250/210 Developer's Manual 10-7 */
+ /* BaudRate = 14.7456 MHz / (16*Divisor) */
+ divisor = 14745600 / (16 * speed);
+
+ local_irq_save(flags);
+
+ if (IS_FIR(si)) {
+ /* stop RX DMA */
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ /* disable FICP */
+ ICCR0 = 0;
+ pxa_set_cken(CKEN13_FICP, 0);
+
+ /* set board transceiver to SIR mode */
+ si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
+
+ /* configure GPIO46/47 */
+ pxa_gpio_mode(GPIO46_STRXD_MD);
+ pxa_gpio_mode(GPIO47_STTXD_MD);
+
+ /* enable the STUART clock */
+ pxa_set_cken(CKEN5_STUART, 1);
+ }
+
+ /* disable STUART first */
+ STIER = 0;
+
+ /* access DLL & DLH */
+ STLCR |= LCR_DLAB;
+ STDLL = divisor & 0xff;
+ STDLH = divisor >> 8;
+ STLCR &= ~LCR_DLAB;
+
+ si->speed = speed;
+ STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6;
+ STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE;
+
+ local_irq_restore(flags);
+ break;
+
+ case 4000000:
+ local_irq_save(flags);
+
+ /* disable STUART */
+ STIER = 0;
+ STISR = 0;
+ pxa_set_cken(CKEN5_STUART, 0);
+
+ /* disable FICP first */
+ ICCR0 = 0;
+
+ /* set board transceiver to FIR mode */
+ si->pdata->transceiver_mode(si->dev, IR_FIRMODE);
+
+ /* configure GPIO46/47 */
+ pxa_gpio_mode(GPIO46_ICPRXD_MD);
+ pxa_gpio_mode(GPIO47_ICPTXD_MD);
+
+ /* enable the FICP clock */
+ pxa_set_cken(CKEN13_FICP, 1);
+
+ si->speed = speed;
+ pxa_irda_fir_dma_rx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_RXE;
+
+ local_irq_restore(flags);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* SIR interrupt service routine. */
+static irqreturn_t pxa_irda_sir_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct pxa_irda *si = netdev_priv(dev);
+ int iir, lsr, data;
+
+ iir = STIIR;
+
+ switch (iir & 0x0F) {
+ case 0x06: /* Receiver Line Status */
+ lsr = STLSR;
+ while (lsr & LSR_FIFOE) {
+ data = STRBR;
+ if (lsr & (LSR_OE | LSR_PE | LSR_FE | LSR_BI)) {
+ printk(KERN_DEBUG "pxa_ir: sir receiving error\n");
+ si->stats.rx_errors++;
+ if (lsr & LSR_FE)
+ si->stats.rx_frame_errors++;
+ if (lsr & LSR_OE)
+ si->stats.rx_fifo_errors++;
+ } else {
+ si->stats.rx_bytes++;
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, data);
+ }
+ lsr = STLSR;
+ }
+ dev->last_rx = jiffies;
+ si->last_oscr = OSCR;
+ break;
+
+ case 0x04: /* Received Data Available */
+ /* forth through */
+
+ case 0x0C: /* Character Timeout Indication */
+ do {
+ si->stats.rx_bytes++;
+ async_unwrap_char(dev, &si->stats, &si->rx_buff, STRBR);
+ } while (STLSR & LSR_DR);
+ dev->last_rx = jiffies;
+ si->last_oscr = OSCR;
+ break;
+
+ case 0x02: /* Transmit FIFO Data Request */
+ while ((si->tx_buff.len) && (STLSR & LSR_TDRQ)) {
+ STTHR = *si->tx_buff.data++;
+ si->tx_buff.len -= 1;
+ }
+
+ if (si->tx_buff.len == 0) {
+ si->stats.tx_packets++;
+ si->stats.tx_bytes += si->tx_buff.data -
+ si->tx_buff.head;
+
+ /* We need to ensure that the transmitter has finished. */
+ while ((STLSR & LSR_TEMT) == 0)
+ cpu_relax();
+ si->last_oscr = OSCR;
+
+ /*
+ * Ok, we've finished transmitting. Now enable
+ * the receiver. Sometimes we get a receive IRQ
+ * immediately after a transmit...
+ */
+ if (si->newspeed) {
+ pxa_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
+ } else {
+ /* enable IR Receiver, disable IR Transmitter */
+ STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6;
+ /* enable STUART and receive interrupts */
+ STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE;
+ }
+ /* I'm hungry! */
+ netif_wake_queue(dev);
+ }
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* FIR Receive DMA interrupt handler */
+static void pxa_irda_fir_dma_rx_irq(int channel, void *data, struct pt_regs *regs)
+{
+ int dcsr = DCSR(channel);
+
+ DCSR(channel) = dcsr & ~DCSR_RUN;
+
+ printk(KERN_DEBUG "pxa_ir: fir rx dma bus error %#x\n", dcsr);
+}
+
+/* FIR Transmit DMA interrupt handler */
+static void pxa_irda_fir_dma_tx_irq(int channel, void *data, struct pt_regs *regs)
+{
+ struct net_device *dev = data;
+ struct pxa_irda *si = netdev_priv(dev);
+ int dcsr;
+
+ dcsr = DCSR(channel);
+ DCSR(channel) = dcsr & ~DCSR_RUN;
+
+ if (dcsr & DCSR_ENDINTR) {
+ si->stats.tx_packets++;
+ si->stats.tx_bytes += si->dma_tx_buff_len;
+ } else {
+ si->stats.tx_errors++;
+ }
+
+ while (ICSR1 & ICSR1_TBY)
+ cpu_relax();
+ si->last_oscr = OSCR;
+
+ /*
+ * HACK: It looks like the TBY bit is dropped too soon.
+ * Without this delay things break.
+ */
+ udelay(120);
+
+ if (si->newspeed) {
+ pxa_irda_set_speed(si, si->newspeed);
+ si->newspeed = 0;
+ } else {
+ ICCR0 = 0;
+ pxa_irda_fir_dma_rx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_RXE;
+ }
+ netif_wake_queue(dev);
+}
+
+/* EIF(Error in FIFO/End in Frame) handler for FIR */
+static void pxa_irda_fir_irq_eif(struct pxa_irda *si, struct net_device *dev)
+{
+ unsigned int len, stat, data;
+
+ /* Get the current data position. */
+ len = DTADR(si->rxdma) - si->dma_rx_buff_phy;
+
+ do {
+ /* Read Status, and then Data. */
+ stat = ICSR1;
+ rmb();
+ data = ICDR;
+
+ if (stat & (ICSR1_CRE | ICSR1_ROR)) {
+ si->stats.rx_errors++;
+ if (stat & ICSR1_CRE) {
+ printk(KERN_DEBUG "pxa_ir: fir receive CRC error\n");
+ si->stats.rx_crc_errors++;
+ }
+ if (stat & ICSR1_ROR) {
+ printk(KERN_DEBUG "pxa_ir: fir receive overrun\n");
+ si->stats.rx_frame_errors++;
+ }
+ } else {
+ si->dma_rx_buff[len++] = data;
+ }
+ /* If we hit the end of frame, there's no point in continuing. */
+ if (stat & ICSR1_EOF)
+ break;
+ } while (ICSR0 & ICSR0_EIF);
+
+ if (stat & ICSR1_EOF) {
+ /* end of frame. */
+ struct sk_buff *skb = alloc_skb(len+1,GFP_ATOMIC);
+ if (!skb) {
+ printk(KERN_ERR "pxa_ir: fir out of memory for receive skb\n");
+ si->stats.rx_dropped++;
+ return;
+ }
+
+ /* Align IP header to 20 bytes */
+ skb_reserve(skb, 1);
+ memcpy(skb->data, si->dma_rx_buff, len);
+ skb_put(skb, len);
+
+ /* Feed it to IrLAP */
+ skb->dev = dev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx(skb);
+
+ si->stats.rx_packets++;
+ si->stats.rx_bytes += len;
+
+ dev->last_rx = jiffies;
+ }
+}
+
+/* FIR interrupt handler */
+static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct pxa_irda *si = netdev_priv(dev);
+ int icsr0;
+
+ /* stop RX DMA */
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ si->last_oscr = OSCR;
+ icsr0 = ICSR0;
+
+ if (icsr0 & (ICSR0_FRE | ICSR0_RAB)) {
+ if (icsr0 & ICSR0_FRE) {
+ printk(KERN_DEBUG "pxa_ir: fir receive frame error\n");
+ si->stats.rx_frame_errors++;
+ } else {
+ printk(KERN_DEBUG "pxa_ir: fir receive abort\n");
+ si->stats.rx_errors++;
+ }
+ ICSR0 = icsr0 & (ICSR0_FRE | ICSR0_RAB);
+ }
+
+ if (icsr0 & ICSR0_EIF) {
+ /* An error in FIFO occured, or there is a end of frame */
+ pxa_irda_fir_irq_eif(si, dev);
+ }
+
+ ICCR0 = 0;
+ pxa_irda_fir_dma_rx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_RXE;
+
+ return IRQ_HANDLED;
+}
+
+/* hard_xmit interface of irda device */
+static int pxa_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+ int speed = irda_get_next_speed(skb);
+
+ /*
+ * Does this packet contain a request to change the interface
+ * speed? If so, remember it until we complete the transmission
+ * of this frame.
+ */
+ if (speed != si->speed && speed != -1)
+ si->newspeed = speed;
+
+ /*
+ * If this is an empty frame, we can bypass a lot.
+ */
+ if (skb->len == 0) {
+ if (si->newspeed) {
+ si->newspeed = 0;
+ pxa_irda_set_speed(si, speed);
+ }
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ netif_stop_queue(dev);
+
+ if (!IS_FIR(si)) {
+ si->tx_buff.data = si->tx_buff.head;
+ si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, si->tx_buff.truesize);
+
+ /* Disable STUART interrupts and switch to transmit mode. */
+ STIER = 0;
+ STISR = IrSR_IR_TRANSMIT_ON | IrSR_XMODE_PULSE_1_6;
+
+ /* enable STUART and transmit interrupts */
+ STIER = IER_UUE | IER_TIE;
+ } else {
+ unsigned long mtt = irda_get_mtt(skb);
+
+ si->dma_tx_buff_len = skb->len;
+ memcpy(si->dma_tx_buff, skb->data, skb->len);
+
+ if (mtt)
+ while ((unsigned)(OSCR - si->last_oscr)/4 < mtt)
+ cpu_relax();
+
+ /* stop RX DMA, disable FICP */
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ ICCR0 = 0;
+
+ pxa_irda_fir_dma_tx_start(si);
+ ICCR0 = ICCR0_ITR | ICCR0_TXE;
+ }
+
+ dev_kfree_skb(skb);
+ dev->trans_start = jiffies;
+ return 0;
+}
+
+static int pxa_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
+{
+ struct if_irda_req *rq = (struct if_irda_req *)ifreq;
+ struct pxa_irda *si = netdev_priv(dev);
+ int ret;
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH:
+ ret = -EPERM;
+ if (capable(CAP_NET_ADMIN)) {
+ /*
+ * We are unable to set the speed if the
+ * device is not running.
+ */
+ if (netif_running(dev)) {
+ ret = pxa_irda_set_speed(si,
+ rq->ifr_baudrate);
+ } else {
+ printk(KERN_INFO "pxa_ir: SIOCSBANDWIDTH: !netif_running\n");
+ ret = 0;
+ }
+ }
+ break;
+
+ case SIOCSMEDIABUSY:
+ ret = -EPERM;
+ if (capable(CAP_NET_ADMIN)) {
+ irda_device_set_media_busy(dev, TRUE);
+ ret = 0;
+ }
+ break;
+
+ case SIOCGRECEIVING:
+ ret = 0;
+ rq->ifr_receiving = IS_FIR(si) ? 0
+ : si->rx_buff.state != OUTSIDE_FRAME;
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ return ret;
+}
+
+static struct net_device_stats *pxa_irda_stats(struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+ return &si->stats;
+}
+
+static void pxa_irda_startup(struct pxa_irda *si)
+{
+ /* Disable STUART interrupts */
+ STIER = 0;
+ /* enable STUART interrupt to the processor */
+ STMCR = MCR_OUT2;
+ /* configure SIR frame format: StartBit - Data 7 ... Data 0 - Stop Bit */
+ STLCR = LCR_WLS0 | LCR_WLS1;
+ /* enable FIFO, we use FIFO to improve performance */
+ STFCR = FCR_TRFIFOE | FCR_ITL_32;
+
+ /* disable FICP */
+ ICCR0 = 0;
+ /* configure FICP ICCR2 */
+ ICCR2 = ICCR2_TXP | ICCR2_TRIG_32;
+
+ /* configure DMAC */
+ DRCMR17 = si->rxdma | DRCMR_MAPVLD;
+ DRCMR18 = si->txdma | DRCMR_MAPVLD;
+
+ /* force SIR reinitialization */
+ si->speed = 4000000;
+ pxa_irda_set_speed(si, 9600);
+
+ printk(KERN_DEBUG "pxa_ir: irda startup\n");
+}
+
+static void pxa_irda_shutdown(struct pxa_irda *si)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* disable STUART and interrupt */
+ STIER = 0;
+ /* disable STUART SIR mode */
+ STISR = 0;
+ /* disable the STUART clock */
+ pxa_set_cken(CKEN5_STUART, 0);
+
+ /* disable DMA */
+ DCSR(si->txdma) &= ~DCSR_RUN;
+ DCSR(si->rxdma) &= ~DCSR_RUN;
+ /* disable FICP */
+ ICCR0 = 0;
+ /* disable the FICP clock */
+ pxa_set_cken(CKEN13_FICP, 0);
+
+ DRCMR17 = 0;
+ DRCMR18 = 0;
+
+ local_irq_restore(flags);
+
+ /* power off board transceiver */
+ si->pdata->transceiver_mode(si->dev, IR_OFF);
+
+ printk(KERN_DEBUG "pxa_ir: irda shutdown\n");
+}
+
+static int pxa_irda_start(struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+ int err;
+
+ si->speed = 9600;
+
+ err = request_irq(IRQ_STUART, pxa_irda_sir_irq, 0, dev->name, dev);
+ if (err)
+ goto err_irq1;
+
+ err = request_irq(IRQ_ICP, pxa_irda_fir_irq, 0, dev->name, dev);
+ if (err)
+ goto err_irq2;
+
+ /*
+ * The interrupt must remain disabled for now.
+ */
+ disable_irq(IRQ_STUART);
+ disable_irq(IRQ_ICP);
+
+ err = -EBUSY;
+ si->rxdma = pxa_request_dma("FICP_RX",DMA_PRIO_LOW, pxa_irda_fir_dma_rx_irq, dev);
+ if (si->rxdma < 0)
+ goto err_rx_dma;
+
+ si->txdma = pxa_request_dma("FICP_TX",DMA_PRIO_LOW, pxa_irda_fir_dma_tx_irq, dev);
+ if (si->txdma < 0)
+ goto err_tx_dma;
+
+ err = -ENOMEM;
+ si->dma_rx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT,
+ &si->dma_rx_buff_phy, GFP_KERNEL );
+ if (!si->dma_rx_buff)
+ goto err_dma_rx_buff;
+
+ si->dma_tx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT,
+ &si->dma_tx_buff_phy, GFP_KERNEL );
+ if (!si->dma_tx_buff)
+ goto err_dma_tx_buff;
+
+ /* Setup the serial port for the initial speed. */
+ pxa_irda_startup(si);
+
+ /*
+ * Open a new IrLAP layer instance.
+ */
+ si->irlap = irlap_open(dev, &si->qos, "pxa");
+ err = -ENOMEM;
+ if (!si->irlap)
+ goto err_irlap;
+
+ /*
+ * Now enable the interrupt and start the queue
+ */
+ enable_irq(IRQ_STUART);
+ enable_irq(IRQ_ICP);
+ netif_start_queue(dev);
+
+ printk(KERN_DEBUG "pxa_ir: irda driver opened\n");
+
+ return 0;
+
+err_irlap:
+ pxa_irda_shutdown(si);
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy);
+err_dma_tx_buff:
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy);
+err_dma_rx_buff:
+ pxa_free_dma(si->txdma);
+err_tx_dma:
+ pxa_free_dma(si->rxdma);
+err_rx_dma:
+ free_irq(IRQ_ICP, dev);
+err_irq2:
+ free_irq(IRQ_STUART, dev);
+err_irq1:
+
+ return err;
+}
+
+static int pxa_irda_stop(struct net_device *dev)
+{
+ struct pxa_irda *si = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+
+ pxa_irda_shutdown(si);
+
+ /* Stop IrLAP */
+ if (si->irlap) {
+ irlap_close(si->irlap);
+ si->irlap = NULL;
+ }
+
+ free_irq(IRQ_STUART, dev);
+ free_irq(IRQ_ICP, dev);
+
+ pxa_free_dma(si->rxdma);
+ pxa_free_dma(si->txdma);
+
+ if (si->dma_rx_buff)
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy);
+ if (si->dma_tx_buff)
+ dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy);
+
+ printk(KERN_DEBUG "pxa_ir: irda driver closed\n");
+ return 0;
+}
+
+static int pxa_irda_suspend(struct device *_dev, pm_message_t state, u32 level)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+ struct pxa_irda *si;
+
+ if (!dev || level != SUSPEND_DISABLE)
+ return 0;
+
+ if (netif_running(dev)) {
+ si = netdev_priv(dev);
+ netif_device_detach(dev);
+ pxa_irda_shutdown(si);
+ }
+
+ return 0;
+}
+
+static int pxa_irda_resume(struct device *_dev, u32 level)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+ struct pxa_irda *si;
+
+ if (!dev || level != RESUME_ENABLE)
+ return 0;
+
+ if (netif_running(dev)) {
+ si = netdev_priv(dev);
+ pxa_irda_startup(si);
+ netif_device_attach(dev);
+ netif_wake_queue(dev);
+ }
+
+ return 0;
+}
+
+
+static int pxa_irda_init_iobuf(iobuff_t *io, int size)
+{
+ io->head = kmalloc(size, GFP_KERNEL | GFP_DMA);
+ if (io->head != NULL) {
+ io->truesize = size;
+ io->in_frame = FALSE;
+ io->state = OUTSIDE_FRAME;
+ io->data = io->head;
+ }
+ return io->head ? 0 : -ENOMEM;
+}
+
+static int pxa_irda_probe(struct device *_dev)
+{
+ struct platform_device *pdev = to_platform_device(_dev);
+ struct net_device *dev;
+ struct pxa_irda *si;
+ unsigned int baudrate_mask;
+ int err;
+
+ if (!pdev->dev.platform_data)
+ return -ENODEV;
+
+ err = request_mem_region(__PREG(STUART), 0x24, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_1;
+
+ err = request_mem_region(__PREG(FICP), 0x1c, "IrDA") ? 0 : -EBUSY;
+ if (err)
+ goto err_mem_2;
+
+ dev = alloc_irdadev(sizeof(struct pxa_irda));
+ if (!dev)
+ goto err_mem_3;
+
+ si = netdev_priv(dev);
+ si->dev = &pdev->dev;
+ si->pdata = pdev->dev.platform_data;
+
+ /*
+ * Initialise the SIR buffers
+ */
+ err = pxa_irda_init_iobuf(&si->rx_buff, 14384);
+ if (err)
+ goto err_mem_4;
+ err = pxa_irda_init_iobuf(&si->tx_buff, 4000);
+ if (err)
+ goto err_mem_5;
+
+ dev->hard_start_xmit = pxa_irda_hard_xmit;
+ dev->open = pxa_irda_start;
+ dev->stop = pxa_irda_stop;
+ dev->do_ioctl = pxa_irda_ioctl;
+ dev->get_stats = pxa_irda_stats;
+
+ irda_init_max_qos_capabilies(&si->qos);
+
+ baudrate_mask = 0;
+ if (si->pdata->transceiver_cap & IR_SIRMODE)
+ baudrate_mask |= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
+ if (si->pdata->transceiver_cap & IR_FIRMODE)
+ baudrate_mask |= IR_4000000 << 8;
+
+ si->qos.baud_rate.bits &= baudrate_mask;
+ si->qos.min_turn_time.bits = 7; /* 1ms or more */
+
+ irda_qos_bits_to_value(&si->qos);
+
+ err = register_netdev(dev);
+
+ if (err == 0)
+ dev_set_drvdata(&pdev->dev, dev);
+
+ if (err) {
+ kfree(si->tx_buff.head);
+err_mem_5:
+ kfree(si->rx_buff.head);
+err_mem_4:
+ free_netdev(dev);
+err_mem_3:
+ release_mem_region(__PREG(FICP), 0x1c);
+err_mem_2:
+ release_mem_region(__PREG(STUART), 0x24);
+ }
+err_mem_1:
+ return err;
+}
+
+static int pxa_irda_remove(struct device *_dev)
+{
+ struct net_device *dev = dev_get_drvdata(_dev);
+
+ if (dev) {
+ struct pxa_irda *si = netdev_priv(dev);
+ unregister_netdev(dev);
+ kfree(si->tx_buff.head);
+ kfree(si->rx_buff.head);
+ free_netdev(dev);
+ }
+
+ release_mem_region(__PREG(STUART), 0x24);
+ release_mem_region(__PREG(FICP), 0x1c);
+
+ return 0;
+}
+
+static struct device_driver pxa_ir_driver = {
+ .name = "pxa2xx-ir",
+ .bus = &platform_bus_type,
+ .probe = pxa_irda_probe,
+ .remove = pxa_irda_remove,
+ .suspend = pxa_irda_suspend,
+ .resume = pxa_irda_resume,
+};
+
+static int __init pxa_irda_init(void)
+{
+ return driver_register(&pxa_ir_driver);
+}
+
+static void __exit pxa_irda_exit(void)
+{
+ driver_unregister(&pxa_ir_driver);
+}
+
+module_init(pxa_irda_init);
+module_exit(pxa_irda_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 8d34ac6..0688330 100644
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -291,12 +291,12 @@
/*
* Suspend the IrDA interface.
*/
-static int sa1100_irda_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int sa1100_irda_suspend(struct device *_dev, pm_message_t state)
{
struct net_device *dev = dev_get_drvdata(_dev);
struct sa1100_irda *si;
- if (!dev || level != SUSPEND_DISABLE)
+ if (!dev)
return 0;
si = dev->priv;
@@ -316,12 +316,12 @@
/*
* Resume the IrDA interface.
*/
-static int sa1100_irda_resume(struct device *_dev, u32 level)
+static int sa1100_irda_resume(struct device *_dev)
{
struct net_device *dev = dev_get_drvdata(_dev);
struct sa1100_irda *si;
- if (!dev || level != RESUME_ENABLE)
+ if (!dev)
return 0;
si = dev->priv;
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index dd89bda..bbac720 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -213,8 +213,8 @@
/* Power Management */
-static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level);
-static int smsc_ircc_resume(struct device *dev, u32 level);
+static int smsc_ircc_suspend(struct device *dev, pm_message_t state);
+static int smsc_ircc_resume(struct device *dev);
static struct device_driver smsc_ircc_driver = {
.name = SMSC_IRCC2_DRIVER_NAME,
@@ -1646,13 +1646,13 @@
return 0;
}
-static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level)
+static int smsc_ircc_suspend(struct device *dev, pm_message_t state)
{
struct smsc_ircc_cb *self = dev_get_drvdata(dev);
IRDA_MESSAGE("%s, Suspending\n", driver_name);
- if (level == SUSPEND_DISABLE && !self->io.suspended) {
+ if (!self->io.suspended) {
smsc_ircc_net_close(self->netdev);
self->io.suspended = 1;
}
@@ -1660,11 +1660,11 @@
return 0;
}
-static int smsc_ircc_resume(struct device *dev, u32 level)
+static int smsc_ircc_resume(struct device *dev)
{
struct smsc_ircc_cb *self = dev_get_drvdata(dev);
- if (level == RESUME_ENABLE && self->io.suspended) {
+ if (self->io.suspended) {
smsc_ircc_net_open(self->netdev);
self->io.suspended = 0;
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index 41bad07..f7b7238 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -415,6 +415,10 @@
static int ticks_limit = 100;
static int max_cmd_backlog = TX_RING_SIZE-1;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void i596_poll_controller(struct net_device *dev);
+#endif
+
static inline void CA(struct net_device *dev)
{
@@ -636,11 +640,11 @@
disable_irq(dev->irq); /* disable IRQs from LAN */
DEB(DEB_INIT,
- printk("RESET 82596 port: %p (with IRQ %d disabled)\n",
- (void*)(dev->base_addr + PA_I82596_RESET),
+ printk("RESET 82596 port: %lx (with IRQ %d disabled)\n",
+ (dev->base_addr + PA_I82596_RESET),
dev->irq));
- gsc_writel(0, (void*)(dev->base_addr + PA_I82596_RESET)); /* Hard Reset */
+ gsc_writel(0, (dev->base_addr + PA_I82596_RESET)); /* Hard Reset */
udelay(100); /* Wait 100us - seems to help */
/* change the scp address */
@@ -1209,6 +1213,9 @@
dev->set_multicast_list = set_multicast_list;
dev->tx_timeout = i596_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = i596_poll_controller;
+#endif
dev->priv = (void *)(dev->mem_start);
@@ -1242,6 +1249,14 @@
return 0;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void i596_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ i596_interrupt(dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
static irqreturn_t i596_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
@@ -1528,17 +1543,18 @@
if (!dev->irq) {
printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
- __FILE__, dev->hpa);
+ __FILE__, dev->hpa.start);
return -ENODEV;
}
- printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa, dev->irq);
+ printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa.start,
+ dev->irq);
netdevice = alloc_etherdev(0);
if (!netdevice)
return -ENOMEM;
- netdevice->base_addr = dev->hpa;
+ netdevice->base_addr = dev->hpa.start;
netdevice->irq = dev->irq;
retval = i82596_probe(netdevice, &dev->dev);
@@ -1566,7 +1582,7 @@
MODULE_DEVICE_TABLE(parisc, lan_tbl);
static struct parisc_driver lan_driver = {
- .name = "Apricot",
+ .name = "lasi_82596",
.id_table = lan_tbl,
.probe = lan_init_chip,
};
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 9063067..ad93b0d 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -133,13 +133,9 @@
int ret = 0;
struct device_driver *drv = dev->driver;
- if (drv && drv->suspend) {
- ret = drv->suspend(dev, state, SUSPEND_DISABLE);
- if (ret == 0)
- ret = drv->suspend(dev, state, SUSPEND_SAVE_STATE);
- if (ret == 0)
- ret = drv->suspend(dev, state, SUSPEND_POWER_DOWN);
- }
+ if (drv && drv->suspend)
+ ret = drv->suspend(dev, state);
+
return ret;
}
@@ -148,13 +144,9 @@
int ret = 0;
struct device_driver *drv = dev->driver;
- if (drv && drv->resume) {
- ret = drv->resume(dev, RESUME_POWER_ON);
- if (ret == 0)
- ret = drv->resume(dev, RESUME_RESTORE_STATE);
- if (ret == 0)
- ret = drv->resume(dev, RESUME_ENABLE);
- }
+ if (drv && drv->resume)
+ ret = drv->resume(dev);
+
return ret;
}
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 0df7e92..d3c9958 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -863,7 +863,7 @@
err = PTR_ERR(ppp_class);
goto out_chrdev;
}
- class_device_create(ppp_class, MKDEV(PPP_MAJOR, 0), NULL, "ppp");
+ class_device_create(ppp_class, NULL, MKDEV(PPP_MAJOR, 0), NULL, "ppp");
err = devfs_mk_cdev(MKDEV(PPP_MAJOR, 0),
S_IFCHR|S_IRUSR|S_IWUSR, "ppp");
if (err)
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index c5bc8ae..c573bb3 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -2295,11 +2295,11 @@
return 0;
}
-static int smc_drv_suspend(struct device *dev, pm_message_t state, u32 level)
+static int smc_drv_suspend(struct device *dev, pm_message_t state)
{
struct net_device *ndev = dev_get_drvdata(dev);
- if (ndev && level == SUSPEND_DISABLE) {
+ if (ndev) {
if (netif_running(ndev)) {
netif_device_detach(ndev);
smc_shutdown(ndev);
@@ -2309,12 +2309,12 @@
return 0;
}
-static int smc_drv_resume(struct device *dev, u32 level)
+static int smc_drv_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct net_device *ndev = dev_get_drvdata(dev);
- if (ndev && level == RESUME_ENABLE) {
+ if (ndev) {
struct smc_local *lp = netdev_priv(ndev);
smc_enable_device(pdev);
if (netif_running(ndev)) {
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index ae9e897..e392ee8 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -400,7 +400,7 @@
goto out_chrdev;
}
for (i=0; i<nr_cards; i++) {
- class_device_create(cosa_class, MKDEV(cosa_major, i),
+ class_device_create(cosa_class, NULL, MKDEV(cosa_major, i),
NULL, "cosa%d", i);
err = devfs_mk_cdev(MKDEV(cosa_major, i),
S_IFCHR|S_IRUSR|S_IWUSR,
diff --git a/drivers/parisc/asp.c b/drivers/parisc/asp.c
index 38860996..558420b 100644
--- a/drivers/parisc/asp.c
+++ b/drivers/parisc/asp.c
@@ -77,12 +77,12 @@
struct gsc_irq gsc_irq;
int ret;
- asp.version = gsc_readb(dev->hpa + ASP_VER_OFFSET) & 0xf;
+ asp.version = gsc_readb(dev->hpa.start + ASP_VER_OFFSET) & 0xf;
asp.name = (asp.version == 1) ? "Asp" : "Cutoff";
asp.hpa = ASP_INTERRUPT_ADDR;
printk(KERN_INFO "%s version %d at 0x%lx found.\n",
- asp.name, asp.version, dev->hpa);
+ asp.name, asp.version, dev->hpa.start);
/* the IRQ ASP should use */
ret = -EBUSY;
@@ -126,7 +126,7 @@
};
struct parisc_driver asp_driver = {
- .name = "Asp",
+ .name = "asp",
.id_table = asp_tbl,
.probe = asp_init_chip,
};
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index a3bd91a..9e0229f 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -100,9 +100,9 @@
#define DBG_RUN_SG(x...)
#endif
-#define CCIO_INLINE /* inline */
-#define WRITE_U32(value, addr) gsc_writel(value, (u32 *)(addr))
-#define READ_U32(addr) gsc_readl((u32 *)(addr))
+#define CCIO_INLINE inline
+#define WRITE_U32(value, addr) __raw_writel(value, addr)
+#define READ_U32(addr) __raw_readl(addr)
#define U2_IOA_RUNWAY 0x580
#define U2_BC_GSC 0x501
@@ -115,28 +115,28 @@
struct ioa_registers {
/* Runway Supervisory Set */
- volatile int32_t unused1[12];
- volatile uint32_t io_command; /* Offset 12 */
- volatile uint32_t io_status; /* Offset 13 */
- volatile uint32_t io_control; /* Offset 14 */
- volatile int32_t unused2[1];
+ int32_t unused1[12];
+ uint32_t io_command; /* Offset 12 */
+ uint32_t io_status; /* Offset 13 */
+ uint32_t io_control; /* Offset 14 */
+ int32_t unused2[1];
/* Runway Auxiliary Register Set */
- volatile uint32_t io_err_resp; /* Offset 0 */
- volatile uint32_t io_err_info; /* Offset 1 */
- volatile uint32_t io_err_req; /* Offset 2 */
- volatile uint32_t io_err_resp_hi; /* Offset 3 */
- volatile uint32_t io_tlb_entry_m; /* Offset 4 */
- volatile uint32_t io_tlb_entry_l; /* Offset 5 */
- volatile uint32_t unused3[1];
- volatile uint32_t io_pdir_base; /* Offset 7 */
- volatile uint32_t io_io_low_hv; /* Offset 8 */
- volatile uint32_t io_io_high_hv; /* Offset 9 */
- volatile uint32_t unused4[1];
- volatile uint32_t io_chain_id_mask; /* Offset 11 */
- volatile uint32_t unused5[2];
- volatile uint32_t io_io_low; /* Offset 14 */
- volatile uint32_t io_io_high; /* Offset 15 */
+ uint32_t io_err_resp; /* Offset 0 */
+ uint32_t io_err_info; /* Offset 1 */
+ uint32_t io_err_req; /* Offset 2 */
+ uint32_t io_err_resp_hi; /* Offset 3 */
+ uint32_t io_tlb_entry_m; /* Offset 4 */
+ uint32_t io_tlb_entry_l; /* Offset 5 */
+ uint32_t unused3[1];
+ uint32_t io_pdir_base; /* Offset 7 */
+ uint32_t io_io_low_hv; /* Offset 8 */
+ uint32_t io_io_high_hv; /* Offset 9 */
+ uint32_t unused4[1];
+ uint32_t io_chain_id_mask; /* Offset 11 */
+ uint32_t unused5[2];
+ uint32_t io_io_low; /* Offset 14 */
+ uint32_t io_io_high; /* Offset 15 */
};
/*
@@ -226,7 +226,7 @@
*/
struct ioc {
- struct ioa_registers *ioc_hpa; /* I/O MMU base address */
+ struct ioa_registers __iomem *ioc_regs; /* I/O MMU base address */
u8 *res_map; /* resource map, bit == pdir entry */
u64 *pdir_base; /* physical base address */
u32 pdir_size; /* bytes, function of IOV Space size */
@@ -595,7 +595,7 @@
** Grab virtual index [0:11]
** Deposit virt_idx bits into I/O PDIR word
*/
- asm volatile ("lci 0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
+ asm volatile ("lci %%r0(%%sr1, %1), %0" : "=r" (ci) : "r" (vba));
asm volatile ("extru %1,19,12,%0" : "+r" (ci) : "r" (ci));
asm volatile ("depw %1,15,12,%0" : "+r" (pa) : "r" (ci));
@@ -613,7 +613,7 @@
** the real mode coherence index generation of U2, the PDIR entry
** must be flushed to memory to retain coherence."
*/
- asm volatile("fdc 0(%0)" : : "r" (pdir_ptr));
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
asm volatile("sync");
}
@@ -636,7 +636,7 @@
byte_cnt += chain_size;
while(byte_cnt > chain_size) {
- WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_hpa->io_command);
+ WRITE_U32(CMD_TLB_PURGE | iovp, &ioc->ioc_regs->io_command);
iovp += chain_size;
byte_cnt -= chain_size;
}
@@ -684,7 +684,7 @@
** Hopefully someone figures out how to patch (NOP) the
** FDC/SYNC out at boot time.
*/
- asm volatile("fdc 0(%0)" : : "r" (pdir_ptr[7]));
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr[7]));
iovp += IOVP_SIZE;
byte_cnt -= IOVP_SIZE;
@@ -1251,7 +1251,7 @@
static int ccio_probe(struct parisc_device *dev);
static struct parisc_driver ccio_driver = {
- .name = "U2:Uturn",
+ .name = "ccio",
.id_table = ccio_tbl,
.probe = ccio_probe,
};
@@ -1314,14 +1314,13 @@
ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);
- BUG_ON(ioc->pdir_size >= 4 * 1024 * 1024); /* max pdir size < 4MB */
+ BUG_ON(ioc->pdir_size > 8 * 1024 * 1024); /* max pdir size <= 8MB */
/* Verify it's a power of two */
BUG_ON((1 << get_order(ioc->pdir_size)) != (ioc->pdir_size >> PAGE_SHIFT));
- DBG_INIT("%s() hpa 0x%lx mem %luMB IOV %dMB (%d bits)\n",
- __FUNCTION__,
- ioc->ioc_hpa,
+ DBG_INIT("%s() hpa 0x%p mem %luMB IOV %dMB (%d bits)\n",
+ __FUNCTION__, ioc->ioc_regs,
(unsigned long) num_physpages >> (20 - PAGE_SHIFT),
iova_space_size>>20,
iov_order + PAGE_SHIFT);
@@ -1329,13 +1328,12 @@
ioc->pdir_base = (u64 *)__get_free_pages(GFP_KERNEL,
get_order(ioc->pdir_size));
if(NULL == ioc->pdir_base) {
- panic("%s:%s() could not allocate I/O Page Table\n", __FILE__,
- __FUNCTION__);
+ panic("%s() could not allocate I/O Page Table\n", __FUNCTION__);
}
memset(ioc->pdir_base, 0, ioc->pdir_size);
BUG_ON((((unsigned long)ioc->pdir_base) & PAGE_MASK) != (unsigned long)ioc->pdir_base);
- DBG_INIT(" base %p", ioc->pdir_base);
+ DBG_INIT(" base %p\n", ioc->pdir_base);
/* resource map size dictated by pdir_size */
ioc->res_size = (ioc->pdir_size / sizeof(u64)) >> 3;
@@ -1344,8 +1342,7 @@
ioc->res_map = (u8 *)__get_free_pages(GFP_KERNEL,
get_order(ioc->res_size));
if(NULL == ioc->res_map) {
- panic("%s:%s() could not allocate resource map\n", __FILE__,
- __FUNCTION__);
+ panic("%s() could not allocate resource map\n", __FUNCTION__);
}
memset(ioc->res_map, 0, ioc->res_size);
@@ -1366,44 +1363,58 @@
** Initialize IOA hardware
*/
WRITE_U32(CCIO_CHAINID_MASK << ioc->chainid_shift,
- &ioc->ioc_hpa->io_chain_id_mask);
+ &ioc->ioc_regs->io_chain_id_mask);
WRITE_U32(virt_to_phys(ioc->pdir_base),
- &ioc->ioc_hpa->io_pdir_base);
+ &ioc->ioc_regs->io_pdir_base);
/*
** Go to "Virtual Mode"
*/
- WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_hpa->io_control);
+ WRITE_U32(IOA_NORMAL_MODE, &ioc->ioc_regs->io_control);
/*
** Initialize all I/O TLB entries to 0 (Valid bit off).
*/
- WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_m);
- WRITE_U32(0, &ioc->ioc_hpa->io_tlb_entry_l);
+ WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_m);
+ WRITE_U32(0, &ioc->ioc_regs->io_tlb_entry_l);
for(i = 1 << CCIO_CHAINID_SHIFT; i ; i--) {
WRITE_U32((CMD_TLB_DIRECT_WRITE | (i << ioc->chainid_shift)),
- &ioc->ioc_hpa->io_command);
+ &ioc->ioc_regs->io_command);
}
}
static void
-ccio_init_resource(struct resource *res, char *name, unsigned long ioaddr)
+ccio_init_resource(struct resource *res, char *name, void __iomem *ioaddr)
{
int result;
res->parent = NULL;
res->flags = IORESOURCE_MEM;
- res->start = (unsigned long)(signed) __raw_readl(ioaddr) << 16;
- res->end = (unsigned long)(signed) (__raw_readl(ioaddr + 4) << 16) - 1;
+ /*
+ * bracing ((signed) ...) are required for 64bit kernel because
+ * we only want to sign extend the lower 16 bits of the register.
+ * The upper 16-bits of range registers are hardcoded to 0xffff.
+ */
+ res->start = (unsigned long)((signed) READ_U32(ioaddr) << 16);
+ res->end = (unsigned long)((signed) (READ_U32(ioaddr + 4) << 16) - 1);
res->name = name;
+ /*
+ * Check if this MMIO range is disable
+ */
if (res->end + 1 == res->start)
return;
- result = request_resource(&iomem_resource, res);
+
+ /* On some platforms (e.g. K-Class), we have already registered
+ * resources for devices reported by firmware. Some are children
+ * of ccio.
+ * "insert" ccio ranges in the mmio hierarchy (/proc/iomem).
+ */
+ result = insert_resource(&iomem_resource, res);
if (result < 0) {
- printk(KERN_ERR "%s: failed to claim CCIO bus address space (%08lx,%08lx)\n",
- __FILE__, res->start, res->end);
+ printk(KERN_ERR "%s() failed to claim CCIO bus address space (%08lx,%08lx)\n",
+ __FUNCTION__, res->start, res->end);
}
}
@@ -1414,9 +1425,8 @@
sprintf(name, "GSC Bus [%d/]", ioc->hw_path);
- ccio_init_resource(res, name, (unsigned long)&ioc->ioc_hpa->io_io_low);
- ccio_init_resource(res + 1, name,
- (unsigned long)&ioc->ioc_hpa->io_io_low_hv);
+ ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low);
+ ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv);
}
static int new_ioc_area(struct resource *res, unsigned long size,
@@ -1427,7 +1437,12 @@
res->start = (max - size + 1) &~ (align - 1);
res->end = res->start + size;
- if (!request_resource(&iomem_resource, res))
+
+ /* We might be trying to expand the MMIO range to include
+ * a child device that has already registered it's MMIO space.
+ * Use "insert" instead of request_resource().
+ */
+ if (!insert_resource(&iomem_resource, res))
return 0;
return new_ioc_area(res, size, min, max - size, align);
@@ -1486,15 +1501,15 @@
if (!expand_ioc_area(parent, size, min, max, align)) {
__raw_writel(((parent->start)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_low));
+ &ioc->ioc_regs->io_io_low);
__raw_writel(((parent->end)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_high));
+ &ioc->ioc_regs->io_io_high);
} else if (!expand_ioc_area(parent + 1, size, min, max, align)) {
parent++;
__raw_writel(((parent->start)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_low_hv));
+ &ioc->ioc_regs->io_io_low_hv);
__raw_writel(((parent->end)>>16) | 0xffff0000,
- (unsigned long)&(ioc->ioc_hpa->io_io_high_hv));
+ &ioc->ioc_regs->io_io_high_hv);
} else {
return -EBUSY;
}
@@ -1521,7 +1536,12 @@
return -EBUSY;
}
- return request_resource(parent, res);
+ /* "transparent" bus bridges need to register MMIO resources
+ * firmware assigned them. e.g. children of hppb.c (e.g. K-class)
+ * registered their resources in the PDC "bus walk" (See
+ * arch/parisc/kernel/inventory.c).
+ */
+ return insert_resource(parent, res);
}
/**
@@ -1546,7 +1566,7 @@
ioc->name = dev->id.hversion == U2_IOA_RUNWAY ? "U2" : "UTurn";
- printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa);
+ printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa.start);
for (i = 0; i < ioc_count; i++) {
ioc_p = &(*ioc_p)->next;
@@ -1554,7 +1574,7 @@
*ioc_p = ioc;
ioc->hw_path = dev->hw_path;
- ioc->ioc_hpa = (struct ioa_registers *)dev->hpa;
+ ioc->ioc_regs = ioremap(dev->hpa.start, 4096);
ccio_ioc_init(ioc);
ccio_init_resources(ioc);
hppa_dma_ops = &ccio_ops;
diff --git a/drivers/parisc/ccio-rm-dma.c b/drivers/parisc/ccio-rm-dma.c
index 57e6385..356b835 100644
--- a/drivers/parisc/ccio-rm-dma.c
+++ b/drivers/parisc/ccio-rm-dma.c
@@ -167,7 +167,7 @@
{
printk(KERN_INFO "%s found %s at 0x%lx\n", MODULE_NAME,
dev->id.hversion == U2_BC_GSC ? "U2" : "UTurn",
- dev->hpa);
+ dev->hpa.start);
/*
** FIXME - should check U2 registers to verify it's really running
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 2f2dbef2..5ab7533 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -178,6 +178,8 @@
void __iomem *base_addr = d->hba.base_addr;
unsigned long flags;
+ DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where,
+ size);
spin_lock_irqsave(&d->dinosaur_pen, flags);
/* tell HW which CFG address */
@@ -211,6 +213,8 @@
void __iomem *base_addr = d->hba.base_addr;
unsigned long flags;
+ DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where,
+ size);
spin_lock_irqsave(&d->dinosaur_pen, flags);
/* avoid address stepping feature */
@@ -295,7 +299,7 @@
struct dino_device *dino_dev = irq_desc[irq].handler_data;
int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq);
- DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq);
+ DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq);
/* Clear the matching bit in the IMR register */
dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq));
@@ -308,7 +312,7 @@
int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, irq);
u32 tmp;
- DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, irq_dev, irq);
+ DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq);
/*
** clear pending IRQ bits
@@ -490,7 +494,7 @@
if (res->start == F_EXTEND(0xf0000000UL | (i * _8MB)))
break;
}
- DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %lx\n",
+ DBG("DINO GSC WRITE i=%d, start=%lx, dino addr = %p\n",
i, res->start, base_addr + DINO_IO_ADDR_EN);
__raw_writel(1 << i, base_addr + DINO_IO_ADDR_EN);
}
@@ -683,6 +687,14 @@
dino_card_init(struct dino_device *dino_dev)
{
u32 brdg_feat = 0x00784e05;
+ unsigned long status;
+
+ status = __raw_readl(dino_dev->hba.base_addr+DINO_IO_STATUS);
+ if (status & 0x0000ff80) {
+ __raw_writel(0x00000005,
+ dino_dev->hba.base_addr+DINO_IO_COMMAND);
+ udelay(1);
+ }
__raw_writel(0x00000000, dino_dev->hba.base_addr+DINO_GMASK);
__raw_writel(0x00000001, dino_dev->hba.base_addr+DINO_IO_FBB_EN);
@@ -902,15 +914,15 @@
** If so, initialize the chip appropriately (card-mode vs bridge mode).
** Much of the initialization is common though.
*/
-static int __init
-dino_driver_callback(struct parisc_device *dev)
+static int __init dino_probe(struct parisc_device *dev)
{
struct dino_device *dino_dev; // Dino specific control struct
const char *version = "unknown";
char *name;
int is_cujo = 0;
struct pci_bus *bus;
-
+ unsigned long hpa = dev->hpa.start;
+
name = "Dino";
if (is_card_dino(&dev->id)) {
version = "3.x (card mode)";
@@ -928,11 +940,11 @@
}
}
- printk("%s version %s found at 0x%lx\n", name, version, dev->hpa);
+ printk("%s version %s found at 0x%lx\n", name, version, hpa);
- if (!request_mem_region(dev->hpa, PAGE_SIZE, name)) {
+ if (!request_mem_region(hpa, PAGE_SIZE, name)) {
printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%ld)!\n",
- dev->hpa);
+ hpa);
return 1;
}
@@ -940,12 +952,12 @@
if (is_cujo && dev->id.hversion_rev == 1) {
#ifdef CONFIG_IOMMU_CCIO
printk(KERN_WARNING "Enabling Cujo 2.0 bug workaround\n");
- if (dev->hpa == (unsigned long)CUJO_RAVEN_ADDR) {
+ if (hpa == (unsigned long)CUJO_RAVEN_ADDR) {
ccio_cujo20_fixup(dev, CUJO_RAVEN_BADPAGE);
- } else if (dev->hpa == (unsigned long)CUJO_FIREHAWK_ADDR) {
+ } else if (hpa == (unsigned long)CUJO_FIREHAWK_ADDR) {
ccio_cujo20_fixup(dev, CUJO_FIREHAWK_BADPAGE);
} else {
- printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", dev->hpa);
+ printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", hpa);
}
#endif
} else if (!is_cujo && !is_card_dino(&dev->id) &&
@@ -970,7 +982,7 @@
memset(dino_dev, 0, sizeof(struct dino_device));
dino_dev->hba.dev = dev;
- dino_dev->hba.base_addr = ioremap(dev->hpa, 4096); /* faster access */
+ dino_dev->hba.base_addr = ioremap(hpa, 4096);
dino_dev->hba.lmmio_space_offset = 0; /* CPU addrs == bus addrs */
spin_lock_init(&dino_dev->dinosaur_pen);
dino_dev->hba.iommu = ccio_get_iommu(dev);
@@ -1027,9 +1039,9 @@
};
static struct parisc_driver dino_driver = {
- .name = "Dino",
+ .name = "dino",
.id_table = dino_tbl,
- .probe = dino_driver_callback,
+ .probe = dino_probe,
};
/*
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 043d47a..6362bf9 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -315,7 +315,7 @@
char *name = is_mongoose(dev) ? "Mongoose" : "Wax";
printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n",
- name, dev->hpa);
+ name, dev->hpa.start);
eisa_dev.hba.dev = dev;
eisa_dev.hba.iommu = ccio_get_iommu(dev);
@@ -397,7 +397,7 @@
MODULE_DEVICE_TABLE(parisc, eisa_tbl);
static struct parisc_driver eisa_driver = {
- .name = "EISA Bus Adapter",
+ .name = "eisa_ba",
.id_table = eisa_tbl,
.probe = eisa_probe,
};
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index af5e025..16d40f9 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -183,12 +183,20 @@
*irqp = irq;
}
+static struct device *next_device(struct klist_iter *i)
+{
+ struct klist_node * n = klist_next(i);
+ return n ? container_of(n, struct device, knode_parent) : NULL;
+}
+
void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
void (*choose_irq)(struct parisc_device *, void *))
{
struct device *dev;
+ struct klist_iter i;
- list_for_each_entry(dev, &parent->dev.children, node) {
+ klist_iter_init(&parent->dev.klist_children, &i);
+ while ((dev = next_device(&i))) {
struct parisc_device *padev = to_parisc_device(dev);
/* work-around for 715/64 and others which have parent
@@ -197,6 +205,7 @@
return gsc_fixup_irqs(padev, ctrl, choose_irq);
choose_irq(padev, ctrl);
}
+ klist_iter_exit(&i);
}
int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic)
diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index e869c60..5edf93f 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c
@@ -68,14 +68,14 @@
memset(card->next, '\0', sizeof(struct hppb_card));
card = card->next;
}
- printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa);
+ printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa.start);
- card->hpa = dev->hpa;
+ card->hpa = dev->hpa.start;
card->mmio_region.name = "HP-PB Bus";
card->mmio_region.flags = IORESOURCE_MEM;
- card->mmio_region.start = __raw_readl(dev->hpa + IO_IO_LOW);
- card->mmio_region.end = __raw_readl(dev->hpa + IO_IO_HIGH) - 1;
+ card->mmio_region.start = gsc_readl(dev->hpa.start + IO_IO_LOW);
+ card->mmio_region.end = gsc_readl(dev->hpa.start + IO_IO_HIGH) - 1;
status = ccio_request_resource(dev, &card->mmio_region);
if(status < 0) {
@@ -93,7 +93,7 @@
};
static struct parisc_driver hppb_driver = {
- .name = "Gecko Boa",
+ .name = "gecko_boa",
.id_table = hppb_tbl,
.probe = hppb_probe,
};
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index 7a57c1b..a39fbfe 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -244,7 +244,7 @@
* 4-byte alignment on 32-bit kernels
*/
a = (unsigned long)kmalloc(sizeof(struct irt_entry) * num_entries + 8, GFP_KERNEL);
- a = (a + 7) & ~7;
+ a = (a + 7UL) & ~7UL;
return (struct irt_entry *)a;
}
diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c
index cb84a4e..a8c2039 100644
--- a/drivers/parisc/lasi.c
+++ b/drivers/parisc/lasi.c
@@ -175,7 +175,7 @@
return -ENOMEM;
lasi->name = "Lasi";
- lasi->hpa = dev->hpa;
+ lasi->hpa = dev->hpa.start;
/* Check the 4-bit (yes, only 4) version register */
lasi->version = gsc_readl(lasi->hpa + LASI_VER) & 0xf;
@@ -233,7 +233,7 @@
};
struct parisc_driver lasi_driver = {
- .name = "Lasi",
+ .name = "lasi",
.id_table = lasi_tbl,
.probe = lasi_init_chip,
};
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 7fdd80b..5e495dc 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -1288,7 +1288,7 @@
** Adjust "window" for this rope.
*/
rsize /= ROPES_PER_IOC;
- r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa);
+ r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start);
r->end = r->start + rsize;
} else {
r->end = r->start = 0; /* Not enabled. */
@@ -1458,7 +1458,7 @@
u32 func_class;
void *tmp_obj;
char *version;
- void __iomem *addr = ioremap(dev->hpa, 4096);
+ void __iomem *addr = ioremap(dev->hpa.start, 4096);
/* Read HW Rev First */
func_class = READ_REG32(addr + LBA_FCLASS);
@@ -1476,7 +1476,7 @@
}
printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n",
- MODULE_NAME, version, func_class & 0xf, dev->hpa);
+ MODULE_NAME, version, func_class & 0xf, dev->hpa.start);
if (func_class < 2) {
printk(KERN_WARNING "Can't support LBA older than "
@@ -1503,17 +1503,17 @@
* but for the mask for func_class.
*/
printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n",
- MODULE_NAME, version, func_class & 0xff, dev->hpa);
+ MODULE_NAME, version, func_class & 0xff, dev->hpa.start);
cfg_ops = &mercury_cfg_ops;
} else {
- printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa);
+ printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa.start);
return -ENODEV;
}
/*
** Tell I/O SAPIC driver we have a IRQ handler/region.
*/
- tmp_obj = iosapic_register(dev->hpa + LBA_IOSAPIC_BASE);
+ tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE);
/* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't
** have an IRT entry will get NULL back from iosapic code.
@@ -1635,7 +1635,7 @@
*/
void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask)
{
- void __iomem * base_addr = ioremap(lba->hpa, 4096);
+ void __iomem * base_addr = ioremap(lba->hpa.start, 4096);
imask <<= 2; /* adjust for hints - 2 more bits */
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 2869022..95bd07b 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -18,6 +18,9 @@
* Changes:
* - Audit copy_from_user in led_proc_write.
* Daniele Bellucci <bellucda@tiscali.it>
+ * - Switch from using a tasklet to a work queue, so the led_LCD_driver
+ * can sleep.
+ * David Pye <dmp@davidmpye.dyndns.org>
*/
#include <linux/config.h>
@@ -37,6 +40,7 @@
#include <linux/proc_fs.h>
#include <linux/ctype.h>
#include <linux/blkdev.h>
+#include <linux/workqueue.h>
#include <linux/rcupdate.h>
#include <asm/io.h>
#include <asm/processor.h>
@@ -47,25 +51,30 @@
#include <asm/uaccess.h>
/* The control of the LEDs and LCDs on PARISC-machines have to be done
- completely in software. The necessary calculations are done in a tasklet
- which is scheduled at every timer interrupt and since the calculations
- may consume relatively much CPU-time some of the calculations can be
+ completely in software. The necessary calculations are done in a work queue
+ task which is scheduled regularly, and since the calculations may consume a
+ relatively large amount of CPU time, some of the calculations can be
turned off with the following variables (controlled via procfs) */
static int led_type = -1;
-static int led_heartbeat = 1;
-static int led_diskio = 1;
-static int led_lanrxtx = 1;
+static unsigned char lastleds; /* LED state from most recent update */
+static unsigned int led_heartbeat = 1;
+static unsigned int led_diskio = 1;
+static unsigned int led_lanrxtx = 1;
static char lcd_text[32];
static char lcd_text_default[32];
+
+static struct workqueue_struct *led_wq;
+static void led_work_func(void *);
+static DECLARE_WORK(led_task, led_work_func, NULL);
+
#if 0
#define DPRINTK(x) printk x
#else
#define DPRINTK(x)
#endif
-
struct lcd_block {
unsigned char command; /* stores the command byte */
unsigned char on; /* value for turning LED on */
@@ -116,12 +125,27 @@
#define LCD_DATA_REG lcd_info.lcd_data_reg_addr
#define LED_DATA_REG lcd_info.lcd_cmd_reg_addr /* LASI & ASP only */
+#define LED_HASLCD 1
+#define LED_NOLCD 0
+
+/* The workqueue must be created at init-time */
+static int start_task(void)
+{
+ /* Display the default text now */
+ if (led_type == LED_HASLCD) lcd_print( lcd_text_default );
+
+ /* Create the work queue and queue the LED task */
+ led_wq = create_singlethread_workqueue("led_wq");
+ queue_work(led_wq, &led_task);
+
+ return 0;
+}
+
+device_initcall(start_task);
/* ptr to LCD/LED-specific function */
static void (*led_func_ptr) (unsigned char);
-#define LED_HASLCD 1
-#define LED_NOLCD 0
#ifdef CONFIG_PROC_FS
static int led_proc_read(char *page, char **start, off_t off, int count,
int *eof, void *data)
@@ -286,52 +310,35 @@
/*
**
** led_LCD_driver()
- **
- ** The logic of the LCD driver is, that we write at every scheduled call
- ** only to one of LCD_CMD_REG _or_ LCD_DATA_REG - registers.
- ** That way we don't need to let this tasklet busywait for min_cmd_delay
- ** milliseconds.
- **
- ** TODO: check the value of "min_cmd_delay" against the value of HZ.
**
*/
static void led_LCD_driver(unsigned char leds)
{
- static int last_index; /* 0:heartbeat, 1:disk, 2:lan_in, 3:lan_out */
- static int last_was_cmd;/* 0: CMD was written last, 1: DATA was last */
- struct lcd_block *block_ptr;
- int value;
-
- switch (last_index) {
- case 0: block_ptr = &lcd_info.heartbeat;
- value = leds & LED_HEARTBEAT;
- break;
- case 1: block_ptr = &lcd_info.disk_io;
- value = leds & LED_DISK_IO;
- break;
- case 2: block_ptr = &lcd_info.lan_rcv;
- value = leds & LED_LAN_RCV;
- break;
- case 3: block_ptr = &lcd_info.lan_tx;
- value = leds & LED_LAN_TX;
- break;
- default: /* should never happen: */
- return;
- }
-
- if (last_was_cmd) {
- /* write the value to the LCD data port */
- gsc_writeb( value ? block_ptr->on : block_ptr->off, LCD_DATA_REG );
- } else {
- /* write the command-byte to the LCD command register */
- gsc_writeb( block_ptr->command, LCD_CMD_REG );
- }
+ static int i;
+ static unsigned char mask[4] = { LED_HEARTBEAT, LED_DISK_IO,
+ LED_LAN_RCV, LED_LAN_TX };
- /* now update the vars for the next interrupt iteration */
- if (++last_was_cmd == 2) { /* switch between cmd & data */
- last_was_cmd = 0;
- if (++last_index == 4)
- last_index = 0; /* switch back to heartbeat index */
+ static struct lcd_block * blockp[4] = {
+ &lcd_info.heartbeat,
+ &lcd_info.disk_io,
+ &lcd_info.lan_rcv,
+ &lcd_info.lan_tx
+ };
+
+ /* Convert min_cmd_delay to milliseconds */
+ unsigned int msec_cmd_delay = 1 + (lcd_info.min_cmd_delay / 1000);
+
+ for (i=0; i<4; ++i)
+ {
+ if ((leds & mask[i]) != (lastleds & mask[i]))
+ {
+ gsc_writeb( blockp[i]->command, LCD_CMD_REG );
+ msleep(msec_cmd_delay);
+
+ gsc_writeb( leds & mask[i] ? blockp[i]->on :
+ blockp[i]->off, LCD_DATA_REG );
+ msleep(msec_cmd_delay);
+ }
}
}
@@ -356,7 +363,7 @@
rx_total = tx_total = 0;
- /* we are running as tasklet, so locking dev_base
+ /* we are running as a workqueue task, so locking dev_base
* for reading should be OK */
read_lock(&dev_base_lock);
rcu_read_lock();
@@ -405,7 +412,7 @@
static unsigned long last_pgpgin, last_pgpgout;
struct page_state pgstat;
int changed;
-
+
get_full_page_state(&pgstat); /* get no of sectors in & out */
/* Just use a very simple calculation here. Do not care about overflow,
@@ -413,87 +420,71 @@
changed = (pgstat.pgpgin != last_pgpgin) || (pgstat.pgpgout != last_pgpgout);
last_pgpgin = pgstat.pgpgin;
last_pgpgout = pgstat.pgpgout;
-
+
return (changed ? LED_DISK_IO : 0);
}
/*
- ** led_tasklet_func()
+ ** led_work_func()
**
- ** is scheduled at every timer interrupt from time.c and
- ** updates the chassis LCD/LED
+ ** manages when and which chassis LCD/LED gets updated
TODO:
- display load average (older machines like 715/64 have 4 "free" LED's for that)
- optimizations
*/
-#define HEARTBEAT_LEN (HZ*6/100)
-#define HEARTBEAT_2ND_RANGE_START (HZ*22/100)
+#define HEARTBEAT_LEN (HZ*10/100)
+#define HEARTBEAT_2ND_RANGE_START (HZ*28/100)
#define HEARTBEAT_2ND_RANGE_END (HEARTBEAT_2ND_RANGE_START + HEARTBEAT_LEN)
-#define NORMALIZED_COUNT(count) (count/(HZ/100))
+#define LED_UPDATE_INTERVAL (1 + (HZ*19/1000))
-static void led_tasklet_func(unsigned long unused)
+static void led_work_func (void *unused)
{
- static unsigned char lastleds;
- unsigned char currentleds; /* stores current value of the LEDs */
- static unsigned long count; /* static incremented value, not wrapped */
+ static unsigned long last_jiffies;
static unsigned long count_HZ; /* counter in range 0..HZ */
+ unsigned char currentleds = 0; /* stores current value of the LEDs */
/* exit if not initialized */
if (!led_func_ptr)
return;
- /* increment the local counters */
- ++count;
- if (++count_HZ == HZ)
+ /* increment the heartbeat timekeeper */
+ count_HZ += jiffies - last_jiffies;
+ last_jiffies = jiffies;
+ if (count_HZ >= HZ)
count_HZ = 0;
- currentleds = lastleds;
-
- if (led_heartbeat)
+ if (likely(led_heartbeat))
{
- /* flash heartbeat-LED like a real heart (2 x short then a long delay) */
- if (count_HZ<HEARTBEAT_LEN ||
- (count_HZ>=HEARTBEAT_2ND_RANGE_START && count_HZ<HEARTBEAT_2ND_RANGE_END))
- currentleds |= LED_HEARTBEAT;
- else
- currentleds &= ~LED_HEARTBEAT;
+ /* flash heartbeat-LED like a real heart
+ * (2 x short then a long delay)
+ */
+ if (count_HZ < HEARTBEAT_LEN ||
+ (count_HZ >= HEARTBEAT_2ND_RANGE_START &&
+ count_HZ < HEARTBEAT_2ND_RANGE_END))
+ currentleds |= LED_HEARTBEAT;
}
- /* look for network activity and flash LEDs respectively */
- if (led_lanrxtx && ((NORMALIZED_COUNT(count)+(8/2)) & 7) == 0)
- {
- currentleds &= ~(LED_LAN_RCV | LED_LAN_TX);
- currentleds |= led_get_net_activity();
- }
-
- /* avoid to calculate diskio-stats at same irq as netio-stats */
- if (led_diskio && (NORMALIZED_COUNT(count) & 7) == 0)
- {
- currentleds &= ~LED_DISK_IO;
- currentleds |= led_get_diskio_activity();
- }
+ if (likely(led_lanrxtx)) currentleds |= led_get_net_activity();
+ if (likely(led_diskio)) currentleds |= led_get_diskio_activity();
/* blink all LEDs twice a second if we got an Oops (HPMC) */
- if (oops_in_progress) {
+ if (unlikely(oops_in_progress))
currentleds = (count_HZ<=(HZ/2)) ? 0 : 0xff;
+
+ if (currentleds != lastleds)
+ {
+ led_func_ptr(currentleds); /* Update the LCD/LEDs */
+ lastleds = currentleds;
}
-
- /* update the LCD/LEDs */
- if (currentleds != lastleds) {
- led_func_ptr(currentleds);
- lastleds = currentleds;
- }
+
+ queue_delayed_work(led_wq, &led_task, LED_UPDATE_INTERVAL);
}
-/* main led tasklet struct (scheduled from time.c) */
-DECLARE_TASKLET_DISABLED(led_tasklet, led_tasklet_func, 0);
-
-
/*
** led_halt()
**
@@ -522,9 +513,13 @@
default: return NOTIFY_DONE;
}
- /* completely stop the LED/LCD tasklet */
- tasklet_disable(&led_tasklet);
-
+ /* Cancel the work item and delete the queue */
+ if (led_wq) {
+ cancel_rearming_delayed_workqueue(led_wq, &led_task);
+ destroy_workqueue(led_wq);
+ led_wq = NULL;
+ }
+
if (lcd_info.model == DISPLAY_MODEL_LCD)
lcd_print(txt);
else
@@ -559,7 +554,6 @@
printk(KERN_INFO "LCD display at %lx,%lx registered\n",
LCD_CMD_REG , LCD_DATA_REG);
led_func_ptr = led_LCD_driver;
- lcd_print( lcd_text_default );
led_type = LED_HASLCD;
break;
@@ -589,9 +583,11 @@
initialized++;
register_reboot_notifier(&led_notifier);
- /* start the led tasklet for the first time */
- tasklet_enable(&led_tasklet);
-
+ /* Ensure the work is queued */
+ if (led_wq) {
+ queue_work(led_wq, &led_task);
+ }
+
return 0;
}
@@ -626,8 +622,8 @@
** lcd_print()
**
** Displays the given string on the LCD-Display of newer machines.
- ** lcd_print() disables the timer-based led tasklet during its
- ** execution and enables it afterwards again.
+ ** lcd_print() disables/enables the timer-based led work queue to
+ ** avoid a race condition while writing the CMD/DATA register pair.
**
*/
int lcd_print( char *str )
@@ -637,12 +633,13 @@
if (!led_func_ptr || lcd_info.model != DISPLAY_MODEL_LCD)
return 0;
- /* temporarily disable the led tasklet */
- tasklet_disable(&led_tasklet);
+ /* temporarily disable the led work task */
+ if (led_wq)
+ cancel_rearming_delayed_workqueue(led_wq, &led_task);
/* copy display string to buffer for procfs */
strlcpy(lcd_text, str, sizeof(lcd_text));
-
+
/* Set LCD Cursor to 1st character */
gsc_writeb(lcd_info.reset_cmd1, LCD_CMD_REG);
udelay(lcd_info.min_cmd_delay);
@@ -656,8 +653,10 @@
udelay(lcd_info.min_cmd_delay);
}
- /* re-enable the led tasklet */
- tasklet_enable(&led_tasklet);
+ /* re-queue the work */
+ if (led_wq) {
+ queue_work(led_wq, &led_task);
+ }
return lcd_info.lcd_width;
}
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 67c8f3b..273a741 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -536,7 +536,7 @@
out += sprintf(out, "Memory tested: ");
if ((result & 0x0F) < 0x0E)
- out += sprintf(out, "%.3f MB", 0.256*(1<<(result & 0x0F)));
+ out += sprintf(out, "%d kB", (1<<(result & 0x0F))*256);
else
out += sprintf(out, "All");
out += sprintf(out, "\n");
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index bd8b3e5..c85653f 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -91,8 +91,8 @@
#define DBG_RES(x...)
#endif
-#if defined(__LP64__) && !defined(CONFIG_PDC_NARROW)
-/* "low end" PA8800 machines use ZX1 chipset */
+#if defined(CONFIG_64BIT)
+/* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
#define ZX1_SUPPORT
#endif
@@ -231,7 +231,7 @@
spinlock_t res_lock;
unsigned int res_bitshift; /* from the LEFT! */
unsigned int res_size; /* size of resource map in bytes */
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
/* FIXME : DMA HINTs not used */
unsigned long hint_mask_pdir; /* bits used for DMA hints */
unsigned int hint_shift_pdir;
@@ -294,7 +294,7 @@
/* Looks nice and keeps the compiler happy */
#define SBA_DEV(d) ((struct sba_device *) (d))
-#if SBA_AGP_SUPPORT
+#ifdef SBA_AGP_SUPPORT
static int reserve_sba_gart = 1;
#endif
@@ -314,7 +314,7 @@
#define WRITE_REG32(val, addr) __raw_writel(cpu_to_le32(val), addr)
#define WRITE_REG64(val, addr) __raw_writeq(cpu_to_le64(val), addr)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#define READ_REG(addr) READ_REG64(addr)
#define WRITE_REG(value, addr) WRITE_REG64(value, addr)
#else
@@ -324,7 +324,7 @@
#ifdef DEBUG_SBA_INIT
-/* NOTE: When __LP64__ isn't defined, READ_REG64() is two 32-bit reads */
+/* NOTE: When CONFIG_64BIT isn't defined, READ_REG64() is two 32-bit reads */
/**
* sba_dump_ranges - debugging only - print ranges assigned to this IOA
@@ -364,7 +364,7 @@
#else
#define sba_dump_ranges(x)
#define sba_dump_tlb(x)
-#endif
+#endif /* DEBUG_SBA_INIT */
#ifdef ASSERT_PDIR_SANITY
@@ -674,7 +674,7 @@
*
***************************************************************/
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
#define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir)
#endif
@@ -743,9 +743,8 @@
* (bit #61, big endian), we have to flush and sync every time
* IO-PDIR is changed in Ike/Astro.
*/
- if (ioc_needs_fdc) {
- asm volatile("fdc 0(%%sr1,%0)\n\tsync" : : "r" (pdir_ptr));
- }
+ if (ioc_needs_fdc)
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
}
@@ -769,42 +768,57 @@
sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
{
u32 iovp = (u32) SBA_IOVP(ioc,iova);
-
- /* Even though this is a big-endian machine, the entries
- ** in the iopdir are little endian. That's why we clear the byte
- ** at +7 instead of at +0.
- */
- int off = PDIR_INDEX(iovp)*sizeof(u64)+7;
+ u64 *pdir_ptr = &ioc->pdir_base[PDIR_INDEX(iovp)];
#ifdef ASSERT_PDIR_SANITY
- /* Assert first pdir entry is set */
- if (0x80 != (((u8 *) ioc->pdir_base)[off])) {
+ /* Assert first pdir entry is set.
+ **
+ ** Even though this is a big-endian machine, the entries
+ ** in the iopdir are little endian. That's why we look at
+ ** the byte at +7 instead of at +0.
+ */
+ if (0x80 != (((u8 *) pdir_ptr)[7])) {
sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
}
#endif
- if (byte_cnt <= IOVP_SIZE)
+ if (byte_cnt > IOVP_SIZE)
{
- iovp |= IOVP_SHIFT; /* set "size" field for PCOM */
+#if 0
+ unsigned long entries_per_cacheline = ioc_needs_fdc ?
+ L1_CACHE_ALIGN(((unsigned long) pdir_ptr))
+ - (unsigned long) pdir_ptr;
+ : 262144;
+#endif
- /*
- ** clear I/O PDIR entry "valid" bit
- ** Do NOT clear the rest - save it for debugging.
- ** We should only clear bits that have previously
- ** been enabled.
- */
- ((u8 *)(ioc->pdir_base))[off] = 0;
- } else {
- u32 t = get_order(byte_cnt) + PAGE_SHIFT;
+ /* set "size" field for PCOM */
+ iovp |= get_order(byte_cnt) + PAGE_SHIFT;
- iovp |= t;
do {
/* clear I/O Pdir entry "valid" bit first */
- ((u8 *)(ioc->pdir_base))[off] = 0;
- off += sizeof(u64);
+ ((u8 *) pdir_ptr)[7] = 0;
+ if (ioc_needs_fdc) {
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
+#if 0
+ entries_per_cacheline = L1_CACHE_SHIFT - 3;
+#endif
+ }
+ pdir_ptr++;
byte_cnt -= IOVP_SIZE;
- } while (byte_cnt > 0);
- }
+ } while (byte_cnt > IOVP_SIZE);
+ } else
+ iovp |= IOVP_SHIFT; /* set "size" field for PCOM */
+
+ /*
+ ** clear I/O PDIR entry "valid" bit.
+ ** We have to R/M/W the cacheline regardless how much of the
+ ** pdir entry that we clobber.
+ ** The rest of the entry would be useful for debugging if we
+ ** could dump core on HPMC.
+ */
+ ((u8 *) pdir_ptr)[7] = 0;
+ if (ioc_needs_fdc)
+ asm volatile("fdc %%r0(%0)" : : "r" (pdir_ptr));
WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM);
}
@@ -819,18 +833,29 @@
static int sba_dma_supported( struct device *dev, u64 mask)
{
struct ioc *ioc;
+
if (dev == NULL) {
printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n");
BUG();
return(0);
}
+ /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first,
+ * then fall back to 32-bit if that fails.
+ * We are just "encouraging" 32-bit DMA masks here since we can
+ * never allow IOMMU bypass unless we add special support for ZX1.
+ */
+ if (mask > ~0U)
+ return 0;
+
ioc = GET_IOC(dev);
- /* check if mask is > than the largest IO Virt Address */
-
- return((int) (mask >= (ioc->ibase +
- (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) )));
+ /*
+ * check if mask is >= than the current max IO Virt Address
+ * The max IO Virt address will *always* < 30 bits.
+ */
+ return((int)(mask >= (ioc->ibase - 1 +
+ (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) )));
}
@@ -898,11 +923,17 @@
size -= IOVP_SIZE;
pdir_start++;
}
- /* form complete address */
+
+ /* force FDC ops in io_pdir_entry() to be visible to IOMMU */
+ if (ioc_needs_fdc)
+ asm volatile("sync" : : );
+
#ifdef ASSERT_PDIR_SANITY
sba_check_pdir(ioc,"Check after sba_map_single()");
#endif
spin_unlock_irqrestore(&ioc->res_lock, flags);
+
+ /* form complete address */
return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG);
}
@@ -958,12 +989,19 @@
d--;
}
ioc->saved_cnt = 0;
+
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
}
#else /* DELAYED_RESOURCE_CNT == 0 */
sba_free_range(ioc, iova, size);
+
+ /* If fdc's were issued, force fdc's to be visible now */
+ if (ioc_needs_fdc)
+ asm volatile("sync" : : );
+
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
#endif /* DELAYED_RESOURCE_CNT == 0 */
+
spin_unlock_irqrestore(&ioc->res_lock, flags);
/* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support.
@@ -1106,6 +1144,10 @@
*/
filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry);
+ /* force FDC ops in io_pdir_entry() to be visible to IOMMU */
+ if (ioc_needs_fdc)
+ asm volatile("sync" : : );
+
#ifdef ASSERT_PDIR_SANITY
if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
{
@@ -1234,8 +1276,10 @@
unsigned long pdir_order = get_order(pdir_size);
pdir_base = __get_free_pages(GFP_KERNEL, pdir_order);
- if (NULL == (void *) pdir_base)
- panic("sba_ioc_init() could not allocate I/O Page Table\n");
+ if (NULL == (void *) pdir_base) {
+ panic("%s() could not allocate I/O Page Table\n",
+ __FUNCTION__);
+ }
/* If this is not PA8700 (PCX-W2)
** OR newer than ver 2.2
@@ -1322,19 +1366,29 @@
return (void *) pdir_base;
}
-/* setup Mercury or Elroy IBASE/IMASK registers. */
-static void setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
+static struct device *next_device(struct klist_iter *i)
{
- /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
+ struct klist_node * n = klist_next(i);
+ return n ? container_of(n, struct device, knode_parent) : NULL;
+}
+
+/* setup Mercury or Elroy IBASE/IMASK registers. */
+static void
+setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
+{
+ /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
extern void lba_set_iregs(struct parisc_device *, u32, u32);
struct device *dev;
+ struct klist_iter i;
- list_for_each_entry(dev, &sba->dev.children, node) {
+ klist_iter_init(&sba->dev.klist_children, &i);
+ while ((dev = next_device(&i))) {
struct parisc_device *lba = to_parisc_device(dev);
- int rope_num = (lba->hpa >> 13) & 0xf;
+ int rope_num = (lba->hpa.start >> 13) & 0xf;
if (rope_num >> 3 == ioc_num)
lba_set_iregs(lba, ioc->ibase, ioc->imask);
}
+ klist_iter_exit(&i);
}
static void
@@ -1343,7 +1397,7 @@
u32 iova_space_mask;
u32 iova_space_size;
int iov_order, tcnfg;
-#if SBA_AGP_SUPPORT
+#ifdef SBA_AGP_SUPPORT
int agp_found = 0;
#endif
/*
@@ -1380,7 +1434,7 @@
DBG_INIT("%s() pdir %p size %x\n",
__FUNCTION__, ioc->pdir_base, ioc->pdir_size);
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
@@ -1404,7 +1458,7 @@
WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK);
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/*
** Setting the upper bits makes checking for bypass addresses
** a little faster later on.
@@ -1437,7 +1491,7 @@
*/
WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
-#if SBA_AGP_SUPPORT
+#ifdef SBA_AGP_SUPPORT
/*
** If an AGP device is present, only use half of the IOV space
** for PCI DMA. Unfortunately we can't know ahead of time
@@ -1489,11 +1543,9 @@
if (iova_space_size < (1 << (20 - PAGE_SHIFT))) {
iova_space_size = 1 << (20 - PAGE_SHIFT);
}
-#ifdef __LP64__
else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) {
iova_space_size = 1 << (30 - PAGE_SHIFT);
}
-#endif
/*
** iova space must be log2() in size.
@@ -1519,7 +1571,7 @@
DBG_INIT("%s() pdir %p size %x\n",
__FUNCTION__, ioc->pdir_base, pdir_size);
-#if SBA_HINT_SUPPORT
+#ifdef SBA_HINT_SUPPORT
/* FIXME : DMA HINTs not used */
ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
@@ -1590,7 +1642,7 @@
static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset)
{
- return ioremap(sba_dev->dev->hpa + offset, SBA_FUNC_SIZE);
+ return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
}
static void sba_hw_init(struct sba_device *sba_dev)
@@ -1968,7 +2020,7 @@
u32 func_class;
int i;
char *version;
- void __iomem *sba_addr = ioremap(dev->hpa, SBA_FUNC_SIZE);
+ void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE);
sba_dump_ranges(sba_addr);
@@ -2010,7 +2062,7 @@
}
printk(KERN_INFO "%s found %s at 0x%lx\n",
- MODULE_NAME, version, dev->hpa);
+ MODULE_NAME, version, dev->hpa.start);
sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL);
if (!sba_dev) {
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index e0efed7..bab3bca 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -11,6 +11,7 @@
* (C) Copyright 2000 Alex deVries <alex@onefishtwo.ca>
* (C) Copyright 2001 John Marvin <jsm fc hp com>
* (C) Copyright 2003 Grant Grundler <grundler parisc-linux org>
+ * (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -405,6 +406,7 @@
serial[0].iobase = sio_dev.sp1_base;
serial[0].irq = SP1_IRQ;
+ spin_lock_init(&serial[0].lock);
retval = early_serial_setup(&serial[0]);
if (retval < 0) {
@@ -414,6 +416,7 @@
serial[1].iobase = sio_dev.sp2_base;
serial[1].irq = SP2_IRQ;
+ spin_lock_init(&serial[1].lock);
retval = early_serial_setup(&serial[1]);
if (retval < 0)
diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c
index e547d7d..17dce2a 100644
--- a/drivers/parisc/wax.c
+++ b/drivers/parisc/wax.c
@@ -81,7 +81,7 @@
return -ENOMEM;
wax->name = "wax";
- wax->hpa = dev->hpa;
+ wax->hpa = dev->hpa.start;
wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */
printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa);
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index 02d72ac..fde29a7 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -359,11 +359,12 @@
unsigned long port;
if (!dev->irq) {
- printk("IRQ not found for parallel device at 0x%lx\n", dev->hpa);
+ printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n",
+ dev->hpa.start);
return -ENODEV;
}
- port = dev->hpa + PARPORT_GSC_OFFSET;
+ port = dev->hpa.start + PARPORT_GSC_OFFSET;
/* some older machines with ASP-chip don't support
* the enhanced parport modes.
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 393e0ce..14f05d2 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -61,7 +61,7 @@
static void pcie_port_shutdown_service(struct device *dev) {}
-static int pcie_port_suspend_service(struct device *dev, pm_message_t state, u32 level)
+static int pcie_port_suspend_service(struct device *dev, pm_message_t state)
{
struct pcie_device *pciedev;
struct pcie_port_service_driver *driver;
@@ -76,7 +76,7 @@
return 0;
}
-static int pcie_port_resume_service(struct device *dev, u32 level)
+static int pcie_port_resume_service(struct device *dev)
{
struct pcie_device *pciedev;
struct pcie_port_service_driver *driver;
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index 470ef75..d90a634 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -519,30 +519,13 @@
}
-static int au1x00_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int au1x00_drv_pcmcia_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
-
static struct device_driver au1x00_pcmcia_driver = {
.probe = au1x00_drv_pcmcia_probe,
.remove = au1x00_drv_pcmcia_remove,
.name = "au1x00-pcmcia",
.bus = &platform_bus_type,
- .suspend = au1x00_drv_pcmcia_suspend,
- .resume = au1x00_drv_pcmcia_resume
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static struct platform_device au1x00_device = {
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 080608c..39d096b 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -1157,7 +1157,8 @@
.requery = pcmcia_bus_rescan,
};
-static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev)
+static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct pcmcia_socket *socket = class_get_devdata(class_dev);
int ret;
@@ -1192,7 +1193,8 @@
return 0;
}
-static void pcmcia_bus_remove_socket(struct class_device *class_dev)
+static void pcmcia_bus_remove_socket(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct pcmcia_socket *socket = class_get_devdata(class_dev);
diff --git a/drivers/pcmcia/hd64465_ss.c b/drivers/pcmcia/hd64465_ss.c
index 316f8bc..b57a0b9 100644
--- a/drivers/pcmcia/hd64465_ss.c
+++ b/drivers/pcmcia/hd64465_ss.c
@@ -844,27 +844,11 @@
local_irq_restore(flags);
}
-static int hd64465_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int hd64465_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
static struct device_driver hd64465_driver = {
.name = "hd64465-pcmcia",
.bus = &platform_bus_type,
- .suspend = hd64465_suspend,
- .resume = hd64465_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static struct platform_device hd64465_device = {
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index a713015..4a41f67 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -1332,27 +1332,11 @@
/*====================================================================*/
-static int i82365_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int i82365_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
static struct device_driver i82365_driver = {
.name = "i82365",
.bus = &platform_bus_type,
- .suspend = i82365_suspend,
- .resume = i82365_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static struct platform_device i82365_device = {
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 65f3ee3..c6ed70e 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -731,28 +731,11 @@
/*====================================================================*/
-static int m32r_pcc_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int m32r_pcc_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
-
static struct device_driver pcc_driver = {
.name = "cfc",
.bus = &platform_bus_type,
- .suspend = m32r_pcc_suspend,
- .resume = m32r_pcc_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static struct platform_device pcc_device = {
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index 7b14d7e..3397ff2 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -695,28 +695,11 @@
/*====================================================================*/
-static int m32r_pcc_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int m32r_pcc_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
-
static struct device_driver pcc_driver = {
.name = "pcc",
.bus = &platform_bus_type,
- .suspend = m32r_pcc_suspend,
- .resume = m32r_pcc_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static struct platform_device pcc_device = {
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 94be9e5..2558c3c 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -329,27 +329,13 @@
return 0;
}
-static int omap_cf_suspend(struct device *dev, pm_message_t mesg, u32 level)
-{
- if (level != SUSPEND_SAVE_STATE)
- return 0;
- return pcmcia_socket_dev_suspend(dev, mesg);
-}
-
-static int omap_cf_resume(struct device *dev, u32 level)
-{
- if (level != RESUME_RESTORE_STATE)
- return 0;
- return pcmcia_socket_dev_resume(dev);
-}
-
static struct device_driver omap_cf_driver = {
.name = (char *) driver_name,
.bus = &platform_bus_type,
.probe = omap_cf_probe,
.remove = __devexit_p(omap_cf_remove),
- .suspend = omap_cf_suspend,
- .resume = omap_cf_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static int __init omap_cf_init(void)
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 325c992..c2a12d5 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -205,32 +205,20 @@
}
EXPORT_SYMBOL(pxa2xx_drv_pcmcia_probe);
-static int pxa2xx_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level)
+static int pxa2xx_drv_pcmcia_resume(struct device *dev)
{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
+ struct pcmcia_low_level *ops = dev->platform_data;
+ int nr = ops ? ops->nr : 0;
-static int pxa2xx_drv_pcmcia_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- {
- struct pcmcia_low_level *ops = dev->platform_data;
- int nr = ops ? ops->nr : 0;
+ MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
- MECR = nr > 1 ? MECR_CIT | MECR_NOS : (nr > 0 ? MECR_CIT : 0);
- ret = pcmcia_socket_dev_resume(dev);
- }
- return ret;
+ return pcmcia_socket_dev_resume(dev);
}
static struct device_driver pxa2xx_pcmcia_driver = {
.probe = pxa2xx_drv_pcmcia_probe,
.remove = soc_common_drv_pcmcia_remove,
- .suspend = pxa2xx_drv_pcmcia_suspend,
+ .suspend = pcmcia_socket_dev_suspend,
.resume = pxa2xx_drv_pcmcia_resume,
.name = "pxa2xx-pcmcia",
.bus = &platform_bus_type,
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index f9a5c70..fc87e7e 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -994,7 +994,8 @@
NULL,
};
-static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev)
+static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct pcmcia_socket *s = class_get_devdata(class_dev);
struct class_device_attribute **attr;
@@ -1011,7 +1012,8 @@
return ret;
}
-static void __devexit pccard_sysfs_remove_rsrc(struct class_device *class_dev)
+static void __devexit pccard_sysfs_remove_rsrc(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct pcmcia_socket *s = class_get_devdata(class_dev);
struct class_device_attribute **attr;
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index d4ed508..b768fa8 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -74,29 +74,13 @@
return ret;
}
-static int sa11x0_drv_pcmcia_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int sa11x0_drv_pcmcia_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
static struct device_driver sa11x0_pcmcia_driver = {
.probe = sa11x0_drv_pcmcia_probe,
.remove = soc_common_drv_pcmcia_remove,
.name = "sa11x0-pcmcia",
.bus = &platform_bus_type,
- .suspend = sa11x0_drv_pcmcia_suspend,
- .resume = sa11x0_drv_pcmcia_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
/* sa11x0_pcmcia_init()
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index bb90a14..81ded52 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -122,7 +122,7 @@
static int pcmcia_probe(struct sa1111_dev *dev)
{
- char *base;
+ void __iomem *base;
if (!request_mem_region(dev->res.start, 512,
SA1111_DRIVER_NAME(dev)))
diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c
index 1040a6c..4a3150a 100644
--- a/drivers/pcmcia/socket_sysfs.c
+++ b/drivers/pcmcia/socket_sysfs.c
@@ -341,7 +341,8 @@
.write = pccard_store_cis,
};
-static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev)
+static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct class_device_attribute **attr;
int ret = 0;
@@ -357,7 +358,8 @@
return ret;
}
-static void __devexit pccard_sysfs_remove_socket(struct class_device *class_dev)
+static void __devexit pccard_sysfs_remove_socket(struct class_device *class_dev,
+ struct class_interface *class_intf)
{
struct class_device_attribute **attr;
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index d5a61ea..f158b67 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -372,27 +372,11 @@
/*====================================================================*/
-static int tcic_drv_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int ret = 0;
- if (level == SUSPEND_SAVE_STATE)
- ret = pcmcia_socket_dev_suspend(dev, state);
- return ret;
-}
-
-static int tcic_drv_resume(struct device *dev, u32 level)
-{
- int ret = 0;
- if (level == RESUME_RESTORE_STATE)
- ret = pcmcia_socket_dev_resume(dev);
- return ret;
-}
-
static struct device_driver tcic_driver = {
.name = "tcic-pcmcia",
.bus = &platform_bus_type,
- .suspend = tcic_drv_suspend,
- .resume = tcic_drv_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static struct platform_device tcic_device = {
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 17bb2da..3d2dca6 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -774,31 +774,11 @@
__setup("vrc4171_card=", vrc4171_card_setup);
-static int vrc4171_card_suspend(struct device *dev, pm_message_t state, u32 level)
-{
- int retval = 0;
-
- if (level == SUSPEND_SAVE_STATE)
- retval = pcmcia_socket_dev_suspend(dev, state);
-
- return retval;
-}
-
-static int vrc4171_card_resume(struct device *dev, u32 level)
-{
- int retval = 0;
-
- if (level == RESUME_RESTORE_STATE)
- retval = pcmcia_socket_dev_resume(dev);
-
- return retval;
-}
-
static struct device_driver vrc4171_card_driver = {
.name = vrc4171_card_name,
.bus = &platform_bus_type,
- .suspend = vrc4171_card_suspend,
- .resume = vrc4171_card_resume,
+ .suspend = pcmcia_socket_dev_suspend,
+ .resume = pcmcia_socket_dev_resume,
};
static int __devinit vrc4171_card_init(void)
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index db9f952..ec6ab65 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -151,6 +151,40 @@
readb(socket->base + 0x800 + reg + 1);
}
+static ssize_t show_yenta_registers(struct device *yentadev, struct device_attribute *attr, char *buf)
+{
+ struct pci_dev *dev = to_pci_dev(yentadev);
+ struct yenta_socket *socket = pci_get_drvdata(dev);
+ int offset = 0, i;
+
+ offset = snprintf(buf, PAGE_SIZE, "CB registers:");
+ for (i = 0; i < 0x24; i += 4) {
+ unsigned val;
+ if (!(i & 15))
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+ val = cb_readl(socket, i);
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, " %08x", val);
+ }
+
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n\nExCA registers:");
+ for (i = 0; i < 0x45; i++) {
+ unsigned char val;
+ if (!(i & 7)) {
+ if (i & 8) {
+ memcpy(buf + offset, " -", 2);
+ offset += 2;
+ } else
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i);
+ }
+ val = exca_readb(socket, i);
+ offset += snprintf(buf + offset, PAGE_SIZE - offset, " %02x", val);
+ }
+ buf[offset++] = '\n';
+ return offset;
+}
+
+static DEVICE_ATTR(yenta_registers, S_IRUSR, show_yenta_registers, NULL);
+
/*
* Ugh, mixed-mode cardbus and 16-bit pccard state: things depend
* on what kind of card is inserted..
@@ -765,6 +799,9 @@
{
struct yenta_socket *sock = pci_get_drvdata(dev);
+ /* Remove the register attributes */
+ device_remove_file(&dev->dev, &dev_attr_yenta_registers);
+
/* we don't want a dying socket registered */
pcmcia_unregister_socket(&sock->socket);
@@ -1138,8 +1175,11 @@
/* Register it with the pcmcia layer.. */
ret = pcmcia_register_socket(&socket->socket);
- if (ret == 0)
+ if (ret == 0) {
+ /* Add the yenta register attributes */
+ device_create_file(&dev->dev, &dev_attr_yenta_registers);
goto out;
+ }
unmap:
iounmap(socket->base);
diff --git a/drivers/s390/char/tape_class.c b/drivers/s390/char/tape_class.c
index ed0cb1f..fcaee44 100644
--- a/drivers/s390/char/tape_class.c
+++ b/drivers/s390/char/tape_class.c
@@ -72,6 +72,7 @@
tcd->class_device = class_device_create(
tape_class,
+ NULL,
tcd->char_device->dev,
device,
"%s", tcd->device_name
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index 491f00c..a107fec 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -787,6 +787,7 @@
return ret;
}
priv->class_device = class_device_create(
+ NULL,
vmlogrdr_class,
MKDEV(vmlogrdr_major, priv->minor_num),
dev,
diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index da6e51c..540147c 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -936,7 +936,7 @@
if (init)
ch_init_elem(ch);
- class_device_create(ch_sysfs_class,
+ class_device_create(ch_sysfs_class, NULL,
MKDEV(SCSI_CHANGER_MAJOR,ch->minor),
dev, "s%s", ch->name);
diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c
index 4cbb618..459a4da 100644
--- a/drivers/scsi/lasi700.c
+++ b/drivers/scsi/lasi700.c
@@ -98,7 +98,7 @@
static int __init
lasi700_probe(struct parisc_device *dev)
{
- unsigned long base = dev->hpa + LASI_SCSI_CORE_OFFSET;
+ unsigned long base = dev->hpa.start + LASI_SCSI_CORE_OFFSET;
struct NCR_700_Host_Parameters *hostdata;
struct Scsi_Host *host;
@@ -125,8 +125,6 @@
hostdata->dmode_extra = DMODE_FC2;
}
- NCR_700_set_mem_mapped(hostdata);
-
host = NCR_700_detect(&lasi700_template, hostdata, &dev->dev);
if (!host)
goto out_kfree;
@@ -168,7 +166,7 @@
}
static struct parisc_driver lasi700_driver = {
- .name = "Lasi SCSI",
+ .name = "lasi_scsi",
.id_table = lasi700_ids,
.probe = lasi700_probe,
.remove = __devexit_p(lasi700_driver_remove),
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index af11331..172839f 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -5629,7 +5629,7 @@
if (!osst_sysfs_valid) return;
- osst_class_member = class_device_create(osst_sysfs_class, dev, device, "%s", name);
+ osst_class_member = class_device_create(osst_sysfs_class, NULL, dev, device, "%s", name);
if (IS_ERR(osst_class_member)) {
printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name);
return;
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index fd56b7e..861e51375 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -104,8 +104,8 @@
#define SG_DEV_ARR_LUMP 32 /* amount to over allocate sg_dev_arr by */
-static int sg_add(struct class_device *);
-static void sg_remove(struct class_device *);
+static int sg_add(struct class_device *, struct class_interface *);
+static void sg_remove(struct class_device *, struct class_interface *);
static Scsi_Request *dummy_cmdp; /* only used for sizeof */
@@ -1506,7 +1506,7 @@
}
static int
-sg_add(struct class_device *cl_dev)
+sg_add(struct class_device *cl_dev, struct class_interface *cl_intf)
{
struct scsi_device *scsidp = to_scsi_device(cl_dev->dev);
struct gendisk *disk;
@@ -1550,7 +1550,7 @@
if (sg_sysfs_valid) {
struct class_device * sg_class_member;
- sg_class_member = class_device_create(sg_sysfs_class,
+ sg_class_member = class_device_create(sg_sysfs_class, NULL,
MKDEV(SCSI_GENERIC_MAJOR, k),
cl_dev->dev, "%s",
disk->disk_name);
@@ -1582,7 +1582,7 @@
}
static void
-sg_remove(struct class_device *cl_dev)
+sg_remove(struct class_device *cl_dev, struct class_interface *cl_intf)
{
struct scsi_device *scsidp = to_scsi_device(cl_dev->dev);
Sg_device *sdp = NULL;
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 927d700..5eb54d8 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4377,7 +4377,7 @@
snprintf(name, 10, "%s%s%s", rew ? "n" : "",
STp->disk->disk_name, st_formats[i]);
st_class_member =
- class_device_create(st_sysfs_class,
+ class_device_create(st_sysfs_class, NULL,
MKDEV(SCSI_TAPE_MAJOR,
TAPE_MINOR(dev_num, mode, rew)),
&STp->device->sdev_gendev, "%s", name);
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index 5a51051..b131432 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -88,7 +88,7 @@
struct gsc_irq gsc_irq;
u32 zalon_vers;
int error = -ENODEV;
- void __iomem *zalon = ioremap(dev->hpa, 4096);
+ void __iomem *zalon = ioremap(dev->hpa.start, 4096);
void __iomem *io_port = zalon + GSC_SCSI_ZALON_OFFSET;
static int unit = 0;
struct Scsi_Host *host;
@@ -127,7 +127,7 @@
device.chip = zalon720_chip;
device.host_id = 7;
device.dev = &dev->dev;
- device.slot.base = dev->hpa + GSC_SCSI_ZALON_OFFSET;
+ device.slot.base = dev->hpa.start + GSC_SCSI_ZALON_OFFSET;
device.slot.base_v = io_port;
device.slot.irq = dev->irq;
device.differential = 2;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d75cdf..afb7ddf 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2358,13 +2358,10 @@
return 0;
}
-static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level)
+static int serial8250_suspend(struct device *dev, pm_message_t state)
{
int i;
- if (level != SUSPEND_DISABLE)
- return 0;
-
for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
@@ -2375,13 +2372,10 @@
return 0;
}
-static int serial8250_resume(struct device *dev, u32 level)
+static int serial8250_resume(struct device *dev)
{
int i;
- if (level != RESUME_ENABLE)
- return 0;
-
for (i = 0; i < UART_NR; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 431aa57..8b49479 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -29,7 +29,6 @@
static int __init
serial_init_chip(struct parisc_device *dev)
{
- static int serial_line_nr;
struct uart_port port;
unsigned long address;
int err;
@@ -42,12 +41,13 @@
*/
if (parisc_parent(dev)->id.hw_type != HPHW_IOA) {
printk(KERN_INFO "Serial: device 0x%lx not configured.\n"
- "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa);
+ "Enable support for Wax, Lasi, Asp or Dino.\n",
+ dev->hpa.start);
}
return -ENODEV;
}
- address = dev->hpa;
+ address = dev->hpa.start;
if (dev->id.sversion != 0x8d) {
address += 0x800;
}
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 679e678..ddd0307 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -50,6 +50,7 @@
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/hardware.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_serial.h>
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 1ff629c..938d185 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -50,6 +50,7 @@
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
#include <asm/hardware/amba_serial.h>
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 87ef368..6a67e8f 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -408,7 +408,11 @@
{
.iobase = SYSCON1,
.irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
+#ifdef CONFIG_MP1000_90MHZ
+ .uartclk = 4515840,
+#else
.uartclk = 3686400,
+#endif
.fifosize = 16,
.ops = &clps711x_pops,
.line = 0,
@@ -417,7 +421,11 @@
{
.iobase = SYSCON2,
.irq = IRQ_UTXINT2, /* IRQ_URXINT2 */
+#ifdef CONFIG_MP1000_90MHZ
+ .uartclk = 4515840,
+#else
.uartclk = 3686400,
+#endif
.fifosize = 16,
.ops = &clps711x_pops,
.line = 1,
@@ -551,6 +559,7 @@
static struct uart_driver clps711x_reg = {
.driver_name = "ttyCL",
.dev_name = "ttyCL",
+ .devfs_name = "ttyCL",
.major = SERIAL_CLPS711X_MAJOR,
.minor = SERIAL_CLPS711X_MINOR,
.nr = UART_NR,
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index bdb4e45..5b3933b 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -921,21 +921,21 @@
.cons = IMX_CONSOLE,
};
-static int serial_imx_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int serial_imx_suspend(struct device *_dev, pm_message_t state)
{
struct imx_port *sport = dev_get_drvdata(_dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&imx_reg, &sport->port);
return 0;
}
-static int serial_imx_resume(struct device *_dev, u32 level)
+static int serial_imx_resume(struct device *_dev)
{
struct imx_port *sport = dev_get_drvdata(_dev);
- if (sport && level == RESUME_ENABLE)
+ if (sport)
uart_resume_port(&imx_reg, &sport->port);
return 0;
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 0585ab2..8a79968 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -781,22 +781,22 @@
#ifdef CONFIG_PM
static int
-mpc52xx_uart_suspend(struct device *dev, pm_message_t state, u32 level)
+mpc52xx_uart_suspend(struct device *dev, pm_message_t state)
{
struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&mpc52xx_uart_driver, port);
return 0;
}
static int
-mpc52xx_uart_resume(struct device *dev, u32 level)
+mpc52xx_uart_resume(struct device *dev)
{
struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
- if (port && level == RESUME_ENABLE)
+ if (port)
uart_resume_port(&mpc52xx_uart_driver, port);
return 0;
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 1890646..660bae5 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -27,6 +27,7 @@
#include <linux/delay.h> /* for udelay */
#include <linux/device.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/parisc-device.h>
#ifdef CONFIG_MAGIC_SYSRQ
@@ -444,7 +445,7 @@
unsigned long bytecnt;
struct uart_port *port;
- status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32);
+ status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
if(status != PDC_OK) {
printk(KERN_ERR "Serial mux: Unable to read IODC.\n");
return 1;
@@ -469,16 +470,18 @@
for(i = 0; i < ports; ++i, ++port_cnt) {
port = &mux_ports[port_cnt];
port->iobase = 0;
- port->mapbase = dev->hpa + MUX_OFFSET + (i * MUX_LINE_OFFSET);
+ port->mapbase = dev->hpa.start + MUX_OFFSET +
+ (i * MUX_LINE_OFFSET);
port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET);
port->iotype = SERIAL_IO_MEM;
port->type = PORT_MUX;
- port->irq = SERIAL_IRQ_NONE;
+ port->irq = NO_IRQ;
port->uartclk = 0;
port->fifosize = MUX_FIFO_SIZE;
port->ops = &mux_pops;
port->flags = UPF_BOOT_AUTOCONF;
port->line = port_cnt;
+ spin_lock_init(&port->lock);
status = uart_add_one_port(&mux_driver, port);
BUG_ON(status);
}
@@ -497,7 +500,7 @@
MODULE_DEVICE_TABLE(parisc, mux_tbl);
static struct parisc_driver serial_mux_driver = {
- .name = "Serial MUX",
+ .name = "serial_mux",
.id_table = mux_tbl,
.probe = mux_probe,
};
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 90c2a86..8cc4ced 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -358,6 +358,9 @@
unsigned long flags;
int retval;
+ if (port->line == 3) /* HWUART */
+ up->mcr |= UART_MCR_AFE;
+ else
up->mcr = 0;
/*
@@ -481,8 +484,10 @@
if ((up->port.uartclk / quot) < (2400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
- else
+ else if ((up->port.uartclk / quot) < (230400 * 16))
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
/*
* Ok, we're now changing the port state. Do it with
@@ -772,6 +777,20 @@
.ops = &serial_pxa_pops,
.line = 2,
},
+ }, { /* HWUART */
+ .name = "HWUART",
+ .cken = CKEN4_HWUART,
+ .port = {
+ .type = PORT_PXA,
+ .iotype = UPIO_MEM,
+ .membase = (void *)&HWUART,
+ .mapbase = __PREG(HWUART),
+ .irq = IRQ_HWUART,
+ .uartclk = 921600 * 16,
+ .fifosize = 64,
+ .ops = &serial_pxa_pops,
+ .line = 3,
+ },
}
};
@@ -786,21 +805,21 @@
.cons = PXA_CONSOLE,
};
-static int serial_pxa_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int serial_pxa_suspend(struct device *_dev, pm_message_t state)
{
struct uart_pxa_port *sport = dev_get_drvdata(_dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&serial_pxa_reg, &sport->port);
return 0;
}
-static int serial_pxa_resume(struct device *_dev, u32 level)
+static int serial_pxa_resume(struct device *_dev)
{
struct uart_pxa_port *sport = dev_get_drvdata(_dev);
- if (sport && level == RESUME_ENABLE)
+ if (sport)
uart_resume_port(&serial_pxa_reg, &sport->port);
return 0;
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 52692aa..06a17df 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1134,23 +1134,22 @@
#ifdef CONFIG_PM
-static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state,
- u32 level)
+static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state)
{
struct uart_port *port = s3c24xx_dev_to_port(dev);
- if (port && level == SUSPEND_DISABLE)
+ if (port)
uart_suspend_port(&s3c24xx_uart_drv, port);
return 0;
}
-static int s3c24xx_serial_resume(struct device *dev, u32 level)
+static int s3c24xx_serial_resume(struct device *dev)
{
struct uart_port *port = s3c24xx_dev_to_port(dev);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- if (port && level == RESUME_ENABLE) {
+ if (port) {
clk_enable(ourport->clk);
s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
clk_disable(ourport->clk);
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index dd8aed2..c4a789e 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -834,21 +834,21 @@
.cons = SA1100_CONSOLE,
};
-static int sa1100_serial_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int sa1100_serial_suspend(struct device *_dev, pm_message_t state)
{
struct sa1100_port *sport = dev_get_drvdata(_dev);
- if (sport && level == SUSPEND_DISABLE)
+ if (sport)
uart_suspend_port(&sa1100_reg, &sport->port);
return 0;
}
-static int sa1100_serial_resume(struct device *_dev, u32 level)
+static int sa1100_serial_resume(struct device *_dev)
{
struct sa1100_port *sport = dev_get_drvdata(_dev);
- if (sport && level == RESUME_ENABLE)
+ if (sport)
uart_resume_port(&sa1100_reg, &sport->port);
return 0;
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 0c5d65a..2b623ab 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -976,14 +976,11 @@
return 0;
}
-static int siu_suspend(struct device *dev, pm_message_t state, u32 level)
+static int siu_suspend(struct device *dev, pm_message_t state)
{
struct uart_port *port;
int i;
- if (level != SUSPEND_DISABLE)
- return 0;
-
for (i = 0; i < siu_uart_driver.nr; i++) {
port = &siu_uart_ports[i];
if ((port->type == PORT_VR41XX_SIU ||
@@ -995,14 +992,11 @@
return 0;
}
-static int siu_resume(struct device *dev, u32 level)
+static int siu_resume(struct device *dev)
{
struct uart_port *port;
int i;
- if (level != RESUME_ENABLE)
- return 0;
-
for (i = 0; i < siu_uart_driver.nr; i++) {
port = &siu_uart_ports[i];
if ((port->type == PORT_VR41XX_SIU ||
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 487ff67..befe0c7 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1509,7 +1509,7 @@
{
int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1);
- dev->class_dev = class_device_create(usb_device_class,
+ dev->class_dev = class_device_create(usb_device_class, NULL,
MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev,
"usbdev%d.%d", dev->bus->busnum, dev->devnum);
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 65ca131..78cb4be 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -172,7 +172,9 @@
++temp;
else
temp = name;
- intf->class_dev = class_device_create(usb_class, MKDEV(USB_MAJOR, minor), &intf->dev, "%s", temp);
+ intf->class_dev = class_device_create(usb_class, NULL,
+ MKDEV(USB_MAJOR, minor),
+ &intf->dev, "%s", temp);
if (IS_ERR(intf->class_dev)) {
spin_lock (&minor_lock);
usb_minors[intf->minor] = NULL;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index ff19d64..14c47a1 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -782,7 +782,8 @@
return -E2BIG;
}
- bus->class_dev = class_device_create(usb_host_class, MKDEV(0,0), bus->controller, "usb_host%d", busnum);
+ bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0),
+ bus->controller, "usb_host%d", busnum);
if (IS_ERR(bus->class_dev)) {
clear_bit(busnum, busmap.busmap);
up(&usb_bus_list_lock);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a12cab5..c3e2024 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1020,9 +1020,15 @@
spin_lock_irqsave(&device_state_lock, flags);
if (udev->state == USB_STATE_NOTATTACHED)
; /* do nothing */
- else if (new_state != USB_STATE_NOTATTACHED)
+ else if (new_state != USB_STATE_NOTATTACHED) {
udev->state = new_state;
- else
+ if (new_state == USB_STATE_CONFIGURED)
+ device_init_wakeup(&udev->dev,
+ (udev->actconfig->desc.bmAttributes
+ & USB_CONFIG_ATT_WAKEUP));
+ else if (new_state != USB_STATE_SUSPENDED)
+ device_init_wakeup(&udev->dev, 0);
+ } else
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
@@ -1546,11 +1552,7 @@
* NOTE: OTG devices may issue remote wakeup (or SRP) even when
* we don't explicitly enable it here.
*/
- if (udev->actconfig
- // && FIXME (remote wakeup enabled on this bus)
- // ... currently assuming it's always appropriate
- && (udev->actconfig->desc.bmAttributes
- & USB_CONFIG_ATT_WAKEUP) != 0) {
+ if (device_may_wakeup(&udev->dev)) {
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 8d9d8ee..5032017 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -935,14 +935,10 @@
return 0;
}
-static int dummy_udc_suspend (struct device *dev, pm_message_t state,
- u32 level)
+static int dummy_udc_suspend (struct device *dev, pm_message_t state)
{
struct dummy *dum = dev_get_drvdata(dev);
- if (level != SUSPEND_DISABLE)
- return 0;
-
dev_dbg (dev, "%s\n", __FUNCTION__);
spin_lock_irq (&dum->lock);
dum->udc_suspended = 1;
@@ -954,13 +950,10 @@
return 0;
}
-static int dummy_udc_resume (struct device *dev, u32 level)
+static int dummy_udc_resume (struct device *dev)
{
struct dummy *dum = dev_get_drvdata(dev);
- if (level != RESUME_ENABLE)
- return 0;
-
dev_dbg (dev, "%s\n", __FUNCTION__);
spin_lock_irq (&dum->lock);
dum->udc_suspended = 0;
@@ -1936,14 +1929,10 @@
return 0;
}
-static int dummy_hcd_suspend (struct device *dev, pm_message_t state,
- u32 level)
+static int dummy_hcd_suspend (struct device *dev, pm_message_t state)
{
struct usb_hcd *hcd;
- if (level != SUSPEND_DISABLE)
- return 0;
-
dev_dbg (dev, "%s\n", __FUNCTION__);
hcd = dev_get_drvdata (dev);
@@ -1958,13 +1947,10 @@
return 0;
}
-static int dummy_hcd_resume (struct device *dev, u32 level)
+static int dummy_hcd_resume (struct device *dev)
{
struct usb_hcd *hcd;
- if (level != RESUME_ENABLE)
- return 0;
-
dev_dbg (dev, "%s\n", __FUNCTION__);
hcd = dev_get_drvdata (dev);
hcd->state = HC_STATE_RUNNING;
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 287c590..b7885dc 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -2909,12 +2909,10 @@
* may involve talking to an external transceiver (e.g. isp1301).
*/
-static int omap_udc_suspend(struct device *dev, pm_message_t message, u32 level)
+static int omap_udc_suspend(struct device *dev, pm_message_t message)
{
u32 devstat;
- if (level != SUSPEND_POWER_DOWN)
- return 0;
devstat = UDC_DEVSTAT_REG;
/* we're requesting 48 MHz clock if the pullup is enabled
@@ -2931,11 +2929,8 @@
return 0;
}
-static int omap_udc_resume(struct device *dev, u32 level)
+static int omap_udc_resume(struct device *dev)
{
- if (level != RESUME_POWER_ON)
- return 0;
-
DBG("resume + wakeup/SRP\n");
omap_pullup(&udc->gadget, 1);
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 6e54539..6470285 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -422,7 +422,7 @@
}
static int
-write_packet(volatile unsigned long *uddr, struct pxa2xx_request *req, unsigned max)
+write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
{
u8 *buf;
unsigned length, count;
@@ -2602,24 +2602,23 @@
* VBUS IRQs should probably be ignored so that the PXA device just acts
* "dead" to USB hosts until system resume.
*/
-static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state, u32 level)
+static int pxa2xx_udc_suspend(struct device *dev, pm_message_t state)
{
struct pxa2xx_udc *udc = dev_get_drvdata(dev);
- if (level == SUSPEND_POWER_DOWN) {
- if (!udc->mach->udc_command)
- WARN("USB host won't detect disconnect!\n");
- pullup(udc, 0);
- }
+ if (!udc->mach->udc_command)
+ WARN("USB host won't detect disconnect!\n");
+ pullup(udc, 0);
+
return 0;
}
-static int pxa2xx_udc_resume(struct device *dev, u32 level)
+static int pxa2xx_udc_resume(struct device *dev)
{
struct pxa2xx_udc *udc = dev_get_drvdata(dev);
- if (level == RESUME_POWER_ON)
- pullup(udc, 1);
+ pullup(udc, 1);
+
return 0;
}
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index a58f3e6..19a883f 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -69,11 +69,11 @@
* UDDR = UDC Endpoint Data Register (the fifo)
* DRCM = DMA Request Channel Map
*/
- volatile unsigned long *reg_udccs;
- volatile unsigned long *reg_ubcr;
- volatile unsigned long *reg_uddr;
+ volatile u32 *reg_udccs;
+ volatile u32 *reg_ubcr;
+ volatile u32 *reg_uddr;
#ifdef USE_DMA
- volatile unsigned long *reg_drcmr;
+ volatile u32 *reg_drcmr;
#define drcmr(n) .reg_drcmr = & DRCMR ## n ,
#else
#define drcmr(n)
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 2548d94..642f350 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1774,15 +1774,12 @@
/*
Suspend of platform device
*/
-static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase)
+static int isp116x_suspend(struct device *dev, pm_message_t state)
{
int ret = 0;
struct usb_hcd *hcd = dev_get_drvdata(dev);
- VDBG("%s: state %x, phase %x\n", __func__, state, phase);
-
- if (phase != SUSPEND_DISABLE && phase != SUSPEND_POWER_DOWN)
- return 0;
+ VDBG("%s: state %x\n", __func__, state);
ret = usb_suspend_device(hcd->self.root_hub, state);
if (!ret) {
@@ -1797,15 +1794,12 @@
/*
Resume platform device
*/
-static int isp116x_resume(struct device *dev, u32 phase)
+static int isp116x_resume(struct device *dev)
{
int ret = 0;
struct usb_hcd *hcd = dev_get_drvdata(dev);
- VDBG("%s: state %x, phase %x\n", __func__, dev->power.power_state,
- phase);
- if (phase != RESUME_POWER_ON)
- return 0;
+ VDBG("%s: state %x\n", __func__, dev->power.power_state);
ret = usb_resume_device(hcd->self.root_hub);
if (!ret) {
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index d8f3ba7..a574216 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -455,14 +455,11 @@
#ifdef CONFIG_PM
-static int ohci_omap_suspend(struct device *dev, pm_message_t message, u32 level)
+static int ohci_omap_suspend(struct device *dev, pm_message_t message)
{
struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev));
int status = -EINVAL;
- if (level != SUSPEND_POWER_DOWN)
- return 0;
-
down(&ohci_to_hcd(ohci)->self.root_hub->serialize);
status = ohci_hub_suspend(ohci_to_hcd(ohci));
if (status == 0) {
@@ -476,14 +473,11 @@
return status;
}
-static int ohci_omap_resume(struct device *dev, u32 level)
+static int ohci_omap_resume(struct device *dev)
{
struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev));
int status = 0;
- if (level != RESUME_POWER_ON)
- return 0;
-
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 2fdb262..f042261 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -309,7 +309,7 @@
return 0;
}
-static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state, u32 level)
+static int ohci_hcd_pxa27x_drv_suspend(struct device *dev, pm_message_t state)
{
// struct platform_device *pdev = to_platform_device(dev);
// struct usb_hcd *hcd = dev_get_drvdata(dev);
@@ -318,7 +318,7 @@
return 0;
}
-static int ohci_hcd_pxa27x_drv_resume(struct device *dev, u32 level)
+static int ohci_hcd_pxa27x_drv_resume(struct device *dev)
{
// struct platform_device *pdev = to_platform_device(dev);
// struct usb_hcd *hcd = dev_get_drvdata(dev);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index cad8585..b5e7a47 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1784,15 +1784,12 @@
*/
static int
-sl811h_suspend(struct device *dev, pm_message_t state, u32 phase)
+sl811h_suspend(struct device *dev, pm_message_t state)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct sl811 *sl811 = hcd_to_sl811(hcd);
int retval = 0;
- if (phase != SUSPEND_POWER_DOWN)
- return retval;
-
if (state.event == PM_EVENT_FREEZE)
retval = sl811h_hub_suspend(hcd);
else if (state.event == PM_EVENT_SUSPEND)
@@ -1803,14 +1800,11 @@
}
static int
-sl811h_resume(struct device *dev, u32 phase)
+sl811h_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct sl811 *sl811 = hcd_to_sl811(hcd);
- if (phase != RESUME_POWER_ON)
- return 0;
-
/* with no "check to see if VBUS is still powered" board hook,
* let's assume it'd only be powered to enable remote wakeup.
*/
diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c
index 74f8760..a32558b 100644
--- a/drivers/usb/input/acecad.c
+++ b/drivers/usb/input/acecad.c
@@ -53,7 +53,7 @@
char name[128];
char phys[64];
struct usb_device *usbdev;
- struct input_dev dev;
+ struct input_dev *input;
struct urb *irq;
signed char *data;
@@ -64,7 +64,7 @@
{
struct usb_acecad *acecad = urb->context;
unsigned char *data = acecad->data;
- struct input_dev *dev = &acecad->dev;
+ struct input_dev *dev = acecad->input;
int prox, status;
switch (urb->status) {
@@ -135,8 +135,8 @@
struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
struct usb_acecad *acecad;
+ struct input_dev *input_dev;
int pipe, maxp;
- char path[64];
if (interface->desc.bNumEndpoints != 1)
return -ENODEV;
@@ -153,8 +153,9 @@
maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL);
- if (!acecad)
- return -ENOMEM;
+ input_dev = input_allocate_device();
+ if (!acecad || !input_dev)
+ goto fail1;
acecad->data = usb_buffer_alloc(dev, 8, SLAB_KERNEL, &acecad->data_dma);
if (!acecad->data)
@@ -164,6 +165,9 @@
if (!acecad->irq)
goto fail2;
+ acecad->usbdev = dev;
+ acecad->input = input_dev;
+
if (dev->manufacturer)
strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
@@ -173,48 +177,48 @@
strlcat(acecad->name, dev->product, sizeof(acecad->name));
}
- usb_make_path(dev, path, sizeof(path));
- snprintf(acecad->phys, sizeof(acecad->phys), "%s/input0", path);
+ usb_make_path(dev, acecad->phys, sizeof(acecad->phys));
+ strlcat(acecad->phys, "/input0", sizeof(acecad->phys));
- acecad->usbdev = dev;
+ input_dev->name = acecad->name;
+ input_dev->phys = acecad->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = acecad;
- acecad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- acecad->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- acecad->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
- acecad->dev.keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2);
+ input_dev->open = usb_acecad_open;
+ input_dev->close = usb_acecad_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+ input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+ input_dev->keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2);
switch (id->driver_info) {
case 0:
- acecad->dev.absmax[ABS_X] = 5000;
- acecad->dev.absmax[ABS_Y] = 3750;
- acecad->dev.absmax[ABS_PRESSURE] = 512;
+ input_dev->absmax[ABS_X] = 5000;
+ input_dev->absmax[ABS_Y] = 3750;
+ input_dev->absmax[ABS_PRESSURE] = 512;
if (!strlen(acecad->name))
snprintf(acecad->name, sizeof(acecad->name),
"USB Acecad Flair Tablet %04x:%04x",
- dev->descriptor.idVendor, dev->descriptor.idProduct);
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
break;
case 1:
- acecad->dev.absmax[ABS_X] = 3000;
- acecad->dev.absmax[ABS_Y] = 2250;
- acecad->dev.absmax[ABS_PRESSURE] = 1024;
+ input_dev->absmax[ABS_X] = 3000;
+ input_dev->absmax[ABS_Y] = 2250;
+ input_dev->absmax[ABS_PRESSURE] = 1024;
if (!strlen(acecad->name))
snprintf(acecad->name, sizeof(acecad->name),
"USB Acecad 302 Tablet %04x:%04x",
- dev->descriptor.idVendor, dev->descriptor.idProduct);
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
break;
}
- acecad->dev.absfuzz[ABS_X] = 4;
- acecad->dev.absfuzz[ABS_Y] = 4;
-
- acecad->dev.private = acecad;
- acecad->dev.open = usb_acecad_open;
- acecad->dev.close = usb_acecad_close;
-
- acecad->dev.name = acecad->name;
- acecad->dev.phys = acecad->phys;
- usb_to_input_id(dev, &acecad->dev.id);
- acecad->dev.dev = &intf->dev;
+ input_dev->absfuzz[ABS_X] = 4;
+ input_dev->absfuzz[ABS_Y] = 4;
usb_fill_int_urb(acecad->irq, dev, pipe,
acecad->data, maxp > 8 ? 8 : maxp,
@@ -222,17 +226,15 @@
acecad->irq->transfer_dma = acecad->data_dma;
acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(&acecad->dev);
-
- printk(KERN_INFO "input: %s with packet size %d on %s\n",
- acecad->name, maxp, path);
+ input_register_device(acecad->input);
usb_set_intfdata(intf, acecad);
return 0;
fail2: usb_buffer_free(dev, 8, acecad->data, acecad->data_dma);
- fail1: kfree(acecad);
+ fail1: input_free_device(input_dev);
+ kfree(acecad);
return -ENOMEM;
}
@@ -243,7 +245,7 @@
usb_set_intfdata(intf, NULL);
if (acecad) {
usb_kill_urb(acecad->irq);
- input_unregister_device(&acecad->dev);
+ input_unregister_device(acecad->input);
usb_free_urb(acecad->irq);
usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma);
kfree(acecad);
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index cd0cbfe..1c52053 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -317,7 +317,7 @@
};
struct aiptek {
- struct input_dev inputdev; /* input device struct */
+ struct input_dev *inputdev; /* input device struct */
struct usb_device *usbdev; /* usb device struct */
struct urb *urb; /* urb for incoming reports */
dma_addr_t data_dma; /* our dma stuffage */
@@ -402,7 +402,7 @@
{
struct aiptek *aiptek = urb->context;
unsigned char *data = aiptek->data;
- struct input_dev *inputdev = &aiptek->inputdev;
+ struct input_dev *inputdev = aiptek->inputdev;
int jitterable = 0;
int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck;
@@ -955,20 +955,20 @@
/* Query getXextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
return ret;
- aiptek->inputdev.absmin[ABS_X] = 0;
- aiptek->inputdev.absmax[ABS_X] = ret - 1;
+ aiptek->inputdev->absmin[ABS_X] = 0;
+ aiptek->inputdev->absmax[ABS_X] = ret - 1;
/* Query getYextension */
if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
return ret;
- aiptek->inputdev.absmin[ABS_Y] = 0;
- aiptek->inputdev.absmax[ABS_Y] = ret - 1;
+ aiptek->inputdev->absmin[ABS_Y] = 0;
+ aiptek->inputdev->absmax[ABS_Y] = ret - 1;
/* Query getPressureLevels */
if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
return ret;
- aiptek->inputdev.absmin[ABS_PRESSURE] = 0;
- aiptek->inputdev.absmax[ABS_PRESSURE] = ret - 1;
+ aiptek->inputdev->absmin[ABS_PRESSURE] = 0;
+ aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1;
/* Depending on whether we are in absolute or relative mode, we will
* do a switchToTablet(absolute) or switchToMouse(relative) command.
@@ -1025,8 +1025,8 @@
return 0;
return snprintf(buf, PAGE_SIZE, "%dx%d\n",
- aiptek->inputdev.absmax[ABS_X] + 1,
- aiptek->inputdev.absmax[ABS_Y] + 1);
+ aiptek->inputdev->absmax[ABS_X] + 1,
+ aiptek->inputdev->absmax[ABS_Y] + 1);
}
/* These structs define the sysfs files, param #1 is the name of the
@@ -1048,7 +1048,7 @@
return 0;
return snprintf(buf, PAGE_SIZE, "0x%04x\n",
- aiptek->inputdev.id.product);
+ aiptek->inputdev->id.product);
}
static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL);
@@ -1063,7 +1063,7 @@
if (aiptek == NULL)
return 0;
- return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev.id.vendor);
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor);
}
static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL);
@@ -1977,7 +1977,6 @@
struct input_dev *inputdev;
struct input_handle *inputhandle;
struct list_head *node, *next;
- char path[64 + 1];
int i;
int speeds[] = { 0,
AIPTEK_PROGRAMMABLE_DELAY_50,
@@ -1996,24 +1995,26 @@
*/
speeds[0] = programmableDelay;
- if ((aiptek = kmalloc(sizeof(struct aiptek), GFP_KERNEL)) == NULL)
- return -ENOMEM;
- memset(aiptek, 0, sizeof(struct aiptek));
+ aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL);
+ inputdev = input_allocate_device();
+ if (!aiptek || !inputdev)
+ goto fail1;
aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH,
SLAB_ATOMIC, &aiptek->data_dma);
- if (aiptek->data == NULL) {
- kfree(aiptek);
- return -ENOMEM;
- }
+ if (!aiptek->data)
+ goto fail1;
aiptek->urb = usb_alloc_urb(0, GFP_KERNEL);
- if (aiptek->urb == NULL) {
- usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
- aiptek->data_dma);
- kfree(aiptek);
- return -ENOMEM;
- }
+ if (!aiptek->urb)
+ goto fail2;
+
+ aiptek->inputdev = inputdev;
+ aiptek->usbdev = usbdev;
+ aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
+ aiptek->inDelay = 0;
+ aiptek->endDelay = 0;
+ aiptek->previousJitterable = 0;
/* Set up the curSettings struct. Said struct contains the current
* programmable parameters. The newSetting struct contains changes
@@ -2036,31 +2037,48 @@
/* Both structs should have equivalent settings
*/
- memcpy(&aiptek->newSetting, &aiptek->curSetting,
- sizeof(struct aiptek_settings));
+ aiptek->newSetting = aiptek->curSetting;
+
+ /* Determine the usb devices' physical path.
+ * Asketh not why we always pretend we're using "../input0",
+ * but I suspect this will have to be refactored one
+ * day if a single USB device can be a keyboard & a mouse
+ * & a tablet, and the inputX number actually will tell
+ * us something...
+ */
+ usb_make_path(usbdev, aiptek->features.usbPath,
+ sizeof(aiptek->features.usbPath));
+ strlcat(aiptek->features.usbPath, "/input0",
+ sizeof(aiptek->features.usbPath));
+
+ /* Set up client data, pointers to open and close routines
+ * for the input device.
+ */
+ inputdev->name = "Aiptek";
+ inputdev->phys = aiptek->features.usbPath;
+ usb_to_input_id(usbdev, &inputdev->id);
+ inputdev->cdev.dev = &intf->dev;
+ inputdev->private = aiptek;
+ inputdev->open = aiptek_open;
+ inputdev->close = aiptek_close;
/* Now program the capacities of the tablet, in terms of being
* an input device.
*/
- aiptek->inputdev.evbit[0] |= BIT(EV_KEY)
+ inputdev->evbit[0] |= BIT(EV_KEY)
| BIT(EV_ABS)
| BIT(EV_REL)
| BIT(EV_MSC);
- aiptek->inputdev.absbit[0] |=
- (BIT(ABS_X) |
- BIT(ABS_Y) |
- BIT(ABS_PRESSURE) |
- BIT(ABS_TILT_X) |
- BIT(ABS_TILT_Y) | BIT(ABS_WHEEL) | BIT(ABS_MISC));
+ inputdev->absbit[0] |= BIT(ABS_MISC);
- aiptek->inputdev.relbit[0] |=
+ inputdev->relbit[0] |=
(BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC));
- aiptek->inputdev.keybit[LONG(BTN_LEFT)] |=
+ inputdev->keybit[LONG(BTN_LEFT)] |=
(BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE));
- aiptek->inputdev.keybit[LONG(BTN_DIGI)] |=
+ inputdev->keybit[LONG(BTN_DIGI)] |=
(BIT(BTN_TOOL_PEN) |
BIT(BTN_TOOL_RUBBER) |
BIT(BTN_TOOL_PENCIL) |
@@ -2070,70 +2088,26 @@
BIT(BTN_TOOL_LENS) |
BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2));
- aiptek->inputdev.mscbit[0] = BIT(MSC_SERIAL);
+ inputdev->mscbit[0] = BIT(MSC_SERIAL);
/* Programming the tablet macro keys needs to be done with a for loop
* as the keycodes are discontiguous.
*/
for (i = 0; i < sizeof(macroKeyEvents) / sizeof(macroKeyEvents[0]); ++i)
- set_bit(macroKeyEvents[i], aiptek->inputdev.keybit);
+ set_bit(macroKeyEvents[i], inputdev->keybit);
- /* Set up client data, pointers to open and close routines
- * for the input device.
- */
- aiptek->inputdev.private = aiptek;
- aiptek->inputdev.open = aiptek_open;
- aiptek->inputdev.close = aiptek_close;
-
- /* Determine the usb devices' physical path.
- * Asketh not why we always pretend we're using "../input0",
- * but I suspect this will have to be refactored one
- * day if a single USB device can be a keyboard & a mouse
- * & a tablet, and the inputX number actually will tell
- * us something...
- */
- if (usb_make_path(usbdev, path, 64) > 0)
- sprintf(aiptek->features.usbPath, "%s/input0", path);
-
- /* Program the input device coordinate capacities. We do not yet
+ /*
+ * Program the input device coordinate capacities. We do not yet
* know what maximum X, Y, and Z values are, so we're putting fake
* values in. Later, we'll ask the tablet to put in the correct
* values.
*/
- aiptek->inputdev.absmin[ABS_X] = 0;
- aiptek->inputdev.absmax[ABS_X] = 2999;
- aiptek->inputdev.absmin[ABS_Y] = 0;
- aiptek->inputdev.absmax[ABS_Y] = 2249;
- aiptek->inputdev.absmin[ABS_PRESSURE] = 0;
- aiptek->inputdev.absmax[ABS_PRESSURE] = 511;
- aiptek->inputdev.absmin[ABS_TILT_X] = AIPTEK_TILT_MIN;
- aiptek->inputdev.absmax[ABS_TILT_X] = AIPTEK_TILT_MAX;
- aiptek->inputdev.absmin[ABS_TILT_Y] = AIPTEK_TILT_MIN;
- aiptek->inputdev.absmax[ABS_TILT_Y] = AIPTEK_TILT_MAX;
- aiptek->inputdev.absmin[ABS_WHEEL] = AIPTEK_WHEEL_MIN;
- aiptek->inputdev.absmax[ABS_WHEEL] = AIPTEK_WHEEL_MAX - 1;
- aiptek->inputdev.absfuzz[ABS_X] = 0;
- aiptek->inputdev.absfuzz[ABS_Y] = 0;
- aiptek->inputdev.absfuzz[ABS_PRESSURE] = 0;
- aiptek->inputdev.absfuzz[ABS_TILT_X] = 0;
- aiptek->inputdev.absfuzz[ABS_TILT_Y] = 0;
- aiptek->inputdev.absfuzz[ABS_WHEEL] = 0;
- aiptek->inputdev.absflat[ABS_X] = 0;
- aiptek->inputdev.absflat[ABS_Y] = 0;
- aiptek->inputdev.absflat[ABS_PRESSURE] = 0;
- aiptek->inputdev.absflat[ABS_TILT_X] = 0;
- aiptek->inputdev.absflat[ABS_TILT_Y] = 0;
- aiptek->inputdev.absflat[ABS_WHEEL] = 0;
- aiptek->inputdev.name = "Aiptek";
- aiptek->inputdev.phys = aiptek->features.usbPath;
- usb_to_input_id(usbdev, &aiptek->inputdev.id);
- aiptek->inputdev.dev = &intf->dev;
-
- aiptek->usbdev = usbdev;
- aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
- aiptek->inDelay = 0;
- aiptek->endDelay = 0;
- aiptek->previousJitterable = 0;
+ input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0);
+ input_set_abs_params(inputdev, ABS_X, 0, 2249, 0, 0);
+ input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+ input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
endpoint = &intf->altsetting[0].endpoint[0].desc;
@@ -2150,28 +2124,6 @@
aiptek->urb->transfer_dma = aiptek->data_dma;
aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- /* Register the tablet as an Input Device
- */
- input_register_device(&aiptek->inputdev);
-
- /* We now will look for the evdev device which is mapped to
- * the tablet. The partial name is kept in the link list of
- * input_handles associated with this input device.
- * What identifies an evdev input_handler is that it begins
- * with 'event', continues with a digit, and that in turn
- * is mapped to /{devfs}/input/eventN.
- */
- inputdev = &aiptek->inputdev;
- list_for_each_safe(node, next, &inputdev->h_list) {
- inputhandle = to_handle(node);
- if (strncmp(inputhandle->name, "event", 5) == 0) {
- strcpy(aiptek->features.inputPath, inputhandle->name);
- break;
- }
- }
-
- info("input: Aiptek on %s (%s)\n", path, aiptek->features.inputPath);
-
/* Program the tablet. This sets the tablet up in the mode
* specified in newSetting, and also queries the tablet's
* physical capacities.
@@ -2186,13 +2138,32 @@
for (i = 0; i < sizeof(speeds) / sizeof(speeds[0]); ++i) {
aiptek->curSetting.programmableDelay = speeds[i];
(void)aiptek_program_tablet(aiptek);
- if (aiptek->inputdev.absmax[ABS_X] > 0) {
+ if (aiptek->inputdev->absmax[ABS_X] > 0) {
info("input: Aiptek using %d ms programming speed\n",
aiptek->curSetting.programmableDelay);
break;
}
}
+ /* Register the tablet as an Input Device
+ */
+ input_register_device(aiptek->inputdev);
+
+ /* We now will look for the evdev device which is mapped to
+ * the tablet. The partial name is kept in the link list of
+ * input_handles associated with this input device.
+ * What identifies an evdev input_handler is that it begins
+ * with 'event', continues with a digit, and that in turn
+ * is mapped to /{devfs}/input/eventN.
+ */
+ list_for_each_safe(node, next, &inputdev->h_list) {
+ inputhandle = to_handle(node);
+ if (strncmp(inputhandle->name, "event", 5) == 0) {
+ strcpy(aiptek->features.inputPath, inputhandle->name);
+ break;
+ }
+ }
+
/* Associate this driver's struct with the usb interface.
*/
usb_set_intfdata(intf, aiptek);
@@ -2207,6 +2178,12 @@
info("aiptek: error loading 'evdev' module");
return 0;
+
+fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
+ aiptek->data_dma);
+fail1: input_free_device(inputdev);
+ kfree(aiptek);
+ return -ENOMEM;
}
/* Forward declaration */
@@ -2234,7 +2211,7 @@
/* Free & unhook everything from the system.
*/
usb_kill_urb(aiptek->urb);
- input_unregister_device(&aiptek->inputdev);
+ input_unregister_device(aiptek->inputdev);
aiptek_delete_files(&intf->dev);
usb_free_urb(aiptek->urb);
usb_buffer_free(interface_to_usbdev(intf),
diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c
index e03c1c5..15840db 100644
--- a/drivers/usb/input/appletouch.c
+++ b/drivers/usb/input/appletouch.c
@@ -39,7 +39,7 @@
#define APPLE_VENDOR_ID 0x05AC
#define ATP_DEVICE(prod) \
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
USB_DEVICE_ID_MATCH_INT_CLASS | \
USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
.idVendor = APPLE_VENDOR_ID, \
@@ -78,9 +78,9 @@
* We try to keep the touchpad aspect ratio while still doing only simple
* arithmetics.
* The factors below give coordinates like:
- * 0 <= x < 960 on 12" and 15" Powerbooks
- * 0 <= x < 1600 on 17" Powerbooks
- * 0 <= y < 646
+ * 0 <= x < 960 on 12" and 15" Powerbooks
+ * 0 <= x < 1600 on 17" Powerbooks
+ * 0 <= y < 646
*/
#define ATP_XFACT 64
#define ATP_YFACT 43
@@ -93,11 +93,12 @@
/* Structure to hold all of our device specific stuff */
struct atp {
+ char phys[64];
struct usb_device * udev; /* usb device */
struct urb * urb; /* usb request block */
signed char * data; /* transferred data */
int open; /* non-zero if opened */
- struct input_dev input; /* input dev */
+ struct input_dev *input; /* input dev */
int valid; /* are the sensors valid ? */
int x_old; /* last reported x/y, */
int y_old; /* used for smoothing */
@@ -114,11 +115,11 @@
int i; \
printk("appletouch: %s %lld", msg, (long long)jiffies); \
for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \
- printk(" %02x", tab[i]); \
- printk("\n"); \
+ printk(" %02x", tab[i]); \
+ printk("\n"); \
}
-#define dprintk(format, a...) \
+#define dprintk(format, a...) \
do { \
if (debug) printk(format, ##a); \
} while (0)
@@ -219,8 +220,8 @@
for (i = 16; i < ATP_XSENSORS; i++)
if (dev->xy_cur[i]) {
printk("appletouch: 17\" model detected.\n");
- input_set_abs_params(&dev->input, ABS_X, 0,
- (ATP_XSENSORS - 1) *
+ input_set_abs_params(dev->input, ABS_X, 0,
+ (ATP_XSENSORS - 1) *
ATP_XFACT - 1,
ATP_FUZZ, 0);
break;
@@ -260,12 +261,12 @@
"Xz: %3d Yz: %3d\n",
x, y, x_z, y_z);
- input_report_key(&dev->input, BTN_TOUCH, 1);
- input_report_abs(&dev->input, ABS_X, x);
- input_report_abs(&dev->input, ABS_Y, y);
- input_report_abs(&dev->input, ABS_PRESSURE,
+ input_report_key(dev->input, BTN_TOUCH, 1);
+ input_report_abs(dev->input, ABS_X, x);
+ input_report_abs(dev->input, ABS_Y, y);
+ input_report_abs(dev->input, ABS_PRESSURE,
min(ATP_PRESSURE, x_z + y_z));
- atp_report_fingers(&dev->input, max(x_f, y_f));
+ atp_report_fingers(dev->input, max(x_f, y_f));
}
dev->x_old = x;
dev->y_old = y;
@@ -273,17 +274,17 @@
else if (!x && !y) {
dev->x_old = dev->y_old = -1;
- input_report_key(&dev->input, BTN_TOUCH, 0);
- input_report_abs(&dev->input, ABS_PRESSURE, 0);
- atp_report_fingers(&dev->input, 0);
+ input_report_key(dev->input, BTN_TOUCH, 0);
+ input_report_abs(dev->input, ABS_PRESSURE, 0);
+ atp_report_fingers(dev->input, 0);
/* reset the accumulator on release */
memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
}
- input_report_key(&dev->input, BTN_LEFT, !!dev->data[80]);
+ input_report_key(dev->input, BTN_LEFT, !!dev->data[80]);
- input_sync(&dev->input);
+ input_sync(dev->input);
exit:
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
@@ -314,21 +315,14 @@
static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id)
{
- struct atp *dev = NULL;
+ struct atp *dev;
+ struct input_dev *input_dev;
+ struct usb_device *udev = interface_to_usbdev(iface);
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
int int_in_endpointAddr = 0;
int i, retval = -ENOMEM;
- /* allocate memory for our device state and initialize it */
- dev = kmalloc(sizeof(struct atp), GFP_KERNEL);
- if (dev == NULL) {
- err("Out of memory");
- goto err_kmalloc;
- }
- memset(dev, 0, sizeof(struct atp));
-
- dev->udev = interface_to_usbdev(iface);
/* set up the endpoint information */
/* use only the first interrupt-in endpoint */
@@ -345,70 +339,82 @@
}
}
if (!int_in_endpointAddr) {
- retval = -EIO;
err("Could not find int-in endpoint");
- goto err_endpoint;
+ return -EIO;
}
- /* save our data pointer in this interface device */
- usb_set_intfdata(iface, dev);
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(struct atp), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!dev || !input_dev) {
+ err("Out of memory");
+ goto err_free_devs;
+ }
+
+ dev->udev = udev;
+ dev->input = input_dev;
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb) {
retval = -ENOMEM;
- goto err_usballoc;
+ goto err_free_devs;
}
+
dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL,
&dev->urb->transfer_dma);
if (!dev->data) {
retval = -ENOMEM;
- goto err_usbbufalloc;
+ goto err_free_urb;
}
- usb_fill_int_urb(dev->urb, dev->udev,
- usb_rcvintpipe(dev->udev, int_in_endpointAddr),
+
+ usb_fill_int_urb(dev->urb, udev,
+ usb_rcvintpipe(udev, int_in_endpointAddr),
dev->data, ATP_DATASIZE, atp_complete, dev, 1);
- init_input_dev(&dev->input);
- dev->input.name = "appletouch";
- dev->input.dev = &iface->dev;
- dev->input.private = dev;
- dev->input.open = atp_open;
- dev->input.close = atp_close;
+ usb_make_path(udev, dev->phys, sizeof(dev->phys));
+ strlcat(dev->phys, "/input0", sizeof(dev->phys));
- usb_to_input_id(dev->udev, &dev->input.id);
+ input_dev->name = "appletouch";
+ input_dev->phys = dev->phys;
+ usb_to_input_id(dev->udev, &input_dev->id);
+ input_dev->cdev.dev = &iface->dev;
- set_bit(EV_ABS, dev->input.evbit);
+ input_dev->private = dev;
+ input_dev->open = atp_open;
+ input_dev->close = atp_close;
+
+ set_bit(EV_ABS, input_dev->evbit);
/*
* 12" and 15" Powerbooks only have 16 x sensors,
* 17" models are detected later.
*/
- input_set_abs_params(&dev->input, ABS_X, 0,
+ input_set_abs_params(input_dev, ABS_X, 0,
(16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0);
- input_set_abs_params(&dev->input, ABS_Y, 0,
+ input_set_abs_params(input_dev, ABS_Y, 0,
(ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0);
- input_set_abs_params(&dev->input, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
- set_bit(EV_KEY, dev->input.evbit);
- set_bit(BTN_TOUCH, dev->input.keybit);
- set_bit(BTN_TOOL_FINGER, dev->input.keybit);
- set_bit(BTN_TOOL_DOUBLETAP, dev->input.keybit);
- set_bit(BTN_TOOL_TRIPLETAP, dev->input.keybit);
- set_bit(BTN_LEFT, dev->input.keybit);
+ set_bit(EV_KEY, input_dev->evbit);
+ set_bit(BTN_TOUCH, input_dev->keybit);
+ set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ set_bit(BTN_LEFT, input_dev->keybit);
- input_register_device(&dev->input);
+ input_register_device(dev->input);
- printk(KERN_INFO "input: appletouch connected\n");
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(iface, dev);
return 0;
-err_usbbufalloc:
+ err_free_urb:
usb_free_urb(dev->urb);
-err_usballoc:
+ err_free_devs:
usb_set_intfdata(iface, NULL);
-err_endpoint:
kfree(dev);
-err_kmalloc:
+ input_free_device(input_dev);
return retval;
}
@@ -419,7 +425,7 @@
usb_set_intfdata(iface, NULL);
if (dev) {
usb_kill_urb(dev->urb);
- input_unregister_device(&dev->input);
+ input_unregister_device(dev->input);
usb_free_urb(dev->urb);
usb_buffer_free(dev->udev, ATP_DATASIZE,
dev->data, dev->urb->transfer_dma);
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index fd99681..9a2a47d 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -112,7 +112,6 @@
#define NAME_BUFSIZE 80 /* size of product name, path buffers */
#define DATA_BUFSIZE 63 /* size of URB data buffers */
-#define ATI_INPUTNUM 1 /* Which input device to register as */
static unsigned long channel_mask;
module_param(channel_mask, ulong, 0444);
@@ -162,7 +161,7 @@
static DECLARE_MUTEX(disconnect_sem);
struct ati_remote {
- struct input_dev idev;
+ struct input_dev *idev;
struct usb_device *udev;
struct usb_interface *interface;
@@ -198,15 +197,13 @@
#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/
/* Translation table from hardware messages to input events. */
-static struct
-{
+static struct {
short kind;
unsigned char data1, data2;
int type;
unsigned int code;
int value;
-} ati_remote_tbl[] =
-{
+} ati_remote_tbl[] = {
/* Directional control pad axes */
{KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */
{KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */
@@ -286,7 +283,6 @@
/* Local function prototypes */
static void ati_remote_dump (unsigned char *data, unsigned int actual_length);
-static void ati_remote_delete (struct ati_remote *dev);
static int ati_remote_open (struct input_dev *inputdev);
static void ati_remote_close (struct input_dev *inputdev);
static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data);
@@ -428,7 +424,7 @@
{
struct ati_remote *ati_remote = urb->context;
unsigned char *data= ati_remote->inbuf;
- struct input_dev *dev = &ati_remote->idev;
+ struct input_dev *dev = ati_remote->idev;
int index, acc;
int remote_num;
@@ -587,17 +583,42 @@
}
/*
- * ati_remote_delete
+ * ati_remote_alloc_buffers
*/
-static void ati_remote_delete(struct ati_remote *ati_remote)
+static int ati_remote_alloc_buffers(struct usb_device *udev,
+ struct ati_remote *ati_remote)
+{
+ ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
+ &ati_remote->inbuf_dma);
+ if (!ati_remote->inbuf)
+ return -1;
+
+ ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
+ &ati_remote->outbuf_dma);
+ if (!ati_remote->outbuf)
+ return -1;
+
+ ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ati_remote->irq_urb)
+ return -1;
+
+ ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ati_remote->out_urb)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * ati_remote_free_buffers
+ */
+static void ati_remote_free_buffers(struct ati_remote *ati_remote)
{
if (ati_remote->irq_urb)
- usb_kill_urb(ati_remote->irq_urb);
+ usb_free_urb(ati_remote->irq_urb);
if (ati_remote->out_urb)
- usb_kill_urb(ati_remote->out_urb);
-
- input_unregister_device(&ati_remote->idev);
+ usb_free_urb(ati_remote->out_urb);
if (ati_remote->inbuf)
usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
@@ -605,20 +626,12 @@
if (ati_remote->outbuf)
usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
- ati_remote->outbuf, ati_remote->outbuf_dma);
-
- if (ati_remote->irq_urb)
- usb_free_urb(ati_remote->irq_urb);
-
- if (ati_remote->out_urb)
- usb_free_urb(ati_remote->out_urb);
-
- kfree(ati_remote);
+ ati_remote->inbuf, ati_remote->outbuf_dma);
}
static void ati_remote_input_init(struct ati_remote *ati_remote)
{
- struct input_dev *idev = &(ati_remote->idev);
+ struct input_dev *idev = ati_remote->idev;
int i;
idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
@@ -637,7 +650,7 @@
idev->phys = ati_remote->phys;
usb_to_input_id(ati_remote->udev, &idev->id);
- idev->dev = &ati_remote->udev->dev;
+ idev->cdev.dev = &ati_remote->udev->dev;
}
static int ati_remote_initialize(struct ati_remote *ati_remote)
@@ -674,7 +687,7 @@
(ati_remote_sendpacket(ati_remote, 0x8007, init2))) {
dev_err(&ati_remote->interface->dev,
"Initializing ati_remote hardware failed.\n");
- return 1;
+ return -EIO;
}
return 0;
@@ -686,95 +699,83 @@
static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
- struct ati_remote *ati_remote = NULL;
- struct usb_host_interface *iface_host;
- int retval = -ENOMEM;
- char path[64];
+ struct usb_host_interface *iface_host = interface->cur_altsetting;
+ struct usb_endpoint_descriptor *endpoint_in, *endpoint_out;
+ struct ati_remote *ati_remote;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
- /* Allocate and clear an ati_remote struct */
- if (!(ati_remote = kmalloc(sizeof (struct ati_remote), GFP_KERNEL)))
- return -ENOMEM;
- memset(ati_remote, 0x00, sizeof (struct ati_remote));
-
- iface_host = interface->cur_altsetting;
if (iface_host->desc.bNumEndpoints != 2) {
err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__);
- retval = -ENODEV;
- goto error;
+ return -ENODEV;
}
- ati_remote->endpoint_in = &(iface_host->endpoint[0].desc);
- ati_remote->endpoint_out = &(iface_host->endpoint[1].desc);
- ati_remote->udev = udev;
- ati_remote->interface = interface;
+ endpoint_in = &iface_host->endpoint[0].desc;
+ endpoint_out = &iface_host->endpoint[1].desc;
- if (!(ati_remote->endpoint_in->bEndpointAddress & 0x80)) {
+ if (!(endpoint_in->bEndpointAddress & USB_DIR_IN)) {
err("%s: Unexpected endpoint_in->bEndpointAddress\n", __FUNCTION__);
- retval = -ENODEV;
- goto error;
+ return -ENODEV;
}
- if ((ati_remote->endpoint_in->bmAttributes & 3) != 3) {
+ if ((endpoint_in->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) {
err("%s: Unexpected endpoint_in->bmAttributes\n", __FUNCTION__);
- retval = -ENODEV;
- goto error;
+ return -ENODEV;
}
- if (le16_to_cpu(ati_remote->endpoint_in->wMaxPacketSize) == 0) {
+ if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
err("%s: endpoint_in message size==0? \n", __FUNCTION__);
- retval = -ENODEV;
- goto error;
+ return -ENODEV;
}
+ ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ati_remote || !input_dev)
+ goto fail1;
+
/* Allocate URB buffers, URBs */
- ati_remote->inbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
- &ati_remote->inbuf_dma);
- if (!ati_remote->inbuf)
- goto error;
+ if (ati_remote_alloc_buffers(udev, ati_remote))
+ goto fail2;
- ati_remote->outbuf = usb_buffer_alloc(udev, DATA_BUFSIZE, SLAB_ATOMIC,
- &ati_remote->outbuf_dma);
- if (!ati_remote->outbuf)
- goto error;
+ ati_remote->endpoint_in = endpoint_in;
+ ati_remote->endpoint_out = endpoint_out;
+ ati_remote->udev = udev;
+ ati_remote->idev = input_dev;
+ ati_remote->interface = interface;
- ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ati_remote->irq_urb)
- goto error;
+ usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
+ strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
- ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!ati_remote->out_urb)
- goto error;
-
- usb_make_path(udev, path, NAME_BUFSIZE);
- sprintf(ati_remote->phys, "%s/input%d", path, ATI_INPUTNUM);
if (udev->manufacturer)
- strcat(ati_remote->name, udev->manufacturer);
+ strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
if (udev->product)
- sprintf(ati_remote->name, "%s %s", ati_remote->name, udev->product);
+ snprintf(ati_remote->name, sizeof(ati_remote->name),
+ "%s %s", ati_remote->name, udev->product);
if (!strlen(ati_remote->name))
- sprintf(ati_remote->name, DRIVER_DESC "(%04x,%04x)",
+ snprintf(ati_remote->name, sizeof(ati_remote->name),
+ DRIVER_DESC "(%04x,%04x)",
le16_to_cpu(ati_remote->udev->descriptor.idVendor),
le16_to_cpu(ati_remote->udev->descriptor.idProduct));
+ ati_remote_input_init(ati_remote);
+
/* Device Hardware Initialization - fills in ati_remote->idev from udev. */
- retval = ati_remote_initialize(ati_remote);
- if (retval)
- goto error;
+ err = ati_remote_initialize(ati_remote);
+ if (err)
+ goto fail3;
/* Set up and register input device */
- ati_remote_input_init(ati_remote);
- input_register_device(&ati_remote->idev);
-
- dev_info(&ati_remote->interface->dev, "Input registered: %s on %s\n",
- ati_remote->name, path);
+ input_register_device(ati_remote->idev);
usb_set_intfdata(interface, ati_remote);
+ return 0;
-error:
- if (retval)
- ati_remote_delete(ati_remote);
-
- return retval;
+fail3: usb_kill_urb(ati_remote->irq_urb);
+ usb_kill_urb(ati_remote->out_urb);
+fail2: ati_remote_free_buffers(ati_remote);
+fail1: input_free_device(input_dev);
+ kfree(ati_remote);
+ return err;
}
/*
@@ -791,7 +792,11 @@
return;
}
- ati_remote_delete(ati_remote);
+ usb_kill_urb(ati_remote->irq_urb);
+ usb_kill_urb(ati_remote->out_urb);
+ input_unregister_device(ati_remote->idev);
+ ati_remote_free_buffers(ati_remote);
+ kfree(ati_remote);
}
/*
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 41f92b9..411a064 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1619,8 +1619,8 @@
struct hid_descriptor *hdesc;
struct hid_device *hid;
unsigned quirks = 0, rsize = 0;
- char *buf, *rdesc;
- int n, insize = 0;
+ char *rdesc;
+ int n, len, insize = 0;
for (n = 0; hid_blacklist[n].idVendor; n++)
if ((hid_blacklist[n].idVendor == le16_to_cpu(dev->descriptor.idVendor)) &&
@@ -1630,10 +1630,11 @@
if (quirks & HID_QUIRK_IGNORE)
return NULL;
- if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) && ((!interface->desc.bNumEndpoints) ||
- usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) {
- dbg("class descriptor not present\n");
- return NULL;
+ if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) &&
+ (!interface->desc.bNumEndpoints ||
+ usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) {
+ dbg("class descriptor not present\n");
+ return NULL;
}
for (n = 0; n < hdesc->bNumDescriptors; n++)
@@ -1749,32 +1750,34 @@
hid->name[0] = 0;
- if (!(buf = kmalloc(64, GFP_KERNEL)))
- goto fail;
+ if (dev->manufacturer)
+ strlcpy(hid->name, dev->manufacturer, sizeof(hid->name));
- if (dev->manufacturer) {
- strcat(hid->name, dev->manufacturer);
- if (dev->product)
- snprintf(hid->name, 64, "%s %s", hid->name, dev->product);
- } else if (dev->product) {
- snprintf(hid->name, 128, "%s", dev->product);
- } else
- snprintf(hid->name, 128, "%04x:%04x",
- le16_to_cpu(dev->descriptor.idVendor),
- le16_to_cpu(dev->descriptor.idProduct));
+ if (dev->product) {
+ if (dev->manufacturer)
+ strlcat(hid->name, " ", sizeof(hid->name));
+ strlcat(hid->name, dev->product, sizeof(hid->name));
+ }
- usb_make_path(dev, buf, 64);
- snprintf(hid->phys, 64, "%s/input%d", buf,
- intf->altsetting[0].desc.bInterfaceNumber);
+ if (!strlen(hid->name))
+ snprintf(hid->name, sizeof(hid->name), "HID %04x:%04x",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ usb_make_path(dev, hid->phys, sizeof(hid->phys));
+ strlcat(hid->phys, "/input", sizeof(hid->phys));
+ len = strlen(hid->phys);
+ if (len < sizeof(hid->phys) - 1)
+ snprintf(hid->phys + len, sizeof(hid->phys) - len,
+ "%d", intf->altsetting[0].desc.bInterfaceNumber);
if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0)
hid->uniq[0] = 0;
- kfree(buf);
-
hid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
if (!hid->urbctrl)
goto fail;
+
usb_fill_control_urb(hid->urbctrl, dev, 0, (void *) hid->cr,
hid->ctrlbuf, 1, hid_ctrl, hid);
hid->urbctrl->setup_dma = hid->cr_dma;
diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c
index 0b64522..9ff25eb 100644
--- a/drivers/usb/input/hid-input.c
+++ b/drivers/usb/input/hid-input.c
@@ -76,8 +76,8 @@
static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_field *field,
struct hid_usage *usage)
{
- struct input_dev *input = &hidinput->input;
- struct hid_device *device = hidinput->input.private;
+ struct input_dev *input = hidinput->input;
+ struct hid_device *device = input->private;
int max = 0, code;
unsigned long *bit = NULL;
@@ -461,7 +461,8 @@
if (!field->hidinput)
return;
- input = &field->hidinput->input;
+
+ input = field->hidinput->input;
input_regs(input, regs);
@@ -533,13 +534,10 @@
void hidinput_report_event(struct hid_device *hid, struct hid_report *report)
{
- struct list_head *lh;
struct hid_input *hidinput;
- list_for_each (lh, &hid->inputs) {
- hidinput = list_entry(lh, struct hid_input, list);
- input_sync(&hidinput->input);
- }
+ list_for_each_entry(hidinput, &hid->inputs, list)
+ input_sync(hidinput->input);
}
static int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field)
@@ -604,6 +602,7 @@
struct usb_device *dev = hid->dev;
struct hid_report *report;
struct hid_input *hidinput = NULL;
+ struct input_dev *input_dev;
int i, j, k;
INIT_LIST_HEAD(&hid->inputs);
@@ -624,25 +623,28 @@
continue;
if (!hidinput) {
- hidinput = kmalloc(sizeof(*hidinput), GFP_KERNEL);
- if (!hidinput) {
+ hidinput = kzalloc(sizeof(*hidinput), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!hidinput || !input_dev) {
+ kfree(hidinput);
+ input_free_device(input_dev);
err("Out of memory during hid input probe");
return -1;
}
- memset(hidinput, 0, sizeof(*hidinput));
+ input_dev->private = hid;
+ input_dev->event = hidinput_input_event;
+ input_dev->open = hidinput_open;
+ input_dev->close = hidinput_close;
+
+ input_dev->name = hid->name;
+ input_dev->phys = hid->phys;
+ input_dev->uniq = hid->uniq;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &hid->intf->dev;
+
+ hidinput->input = input_dev;
list_add_tail(&hidinput->list, &hid->inputs);
-
- hidinput->input.private = hid;
- hidinput->input.event = hidinput_input_event;
- hidinput->input.open = hidinput_open;
- hidinput->input.close = hidinput_close;
-
- hidinput->input.name = hid->name;
- hidinput->input.phys = hid->phys;
- hidinput->input.uniq = hid->uniq;
- usb_to_input_id(dev, &hidinput->input.id);
- hidinput->input.dev = &hid->intf->dev;
}
for (i = 0; i < report->maxfield; i++)
@@ -657,7 +659,7 @@
* UGCI) cram a lot of unrelated inputs into the
* same interface. */
hidinput->report = report;
- input_register_device(&hidinput->input);
+ input_register_device(hidinput->input);
hidinput = NULL;
}
}
@@ -667,7 +669,7 @@
* only useful in this case, and not for multi-input quirks. */
if (hidinput) {
hid_ff_init(hid);
- input_register_device(&hidinput->input);
+ input_register_device(hidinput->input);
}
return 0;
@@ -675,13 +677,11 @@
void hidinput_disconnect(struct hid_device *hid)
{
- struct list_head *lh, *next;
- struct hid_input *hidinput;
+ struct hid_input *hidinput, *next;
- list_for_each_safe(lh, next, &hid->inputs) {
- hidinput = list_entry(lh, struct hid_input, list);
- input_unregister_device(&hidinput->input);
+ list_for_each_entry_safe(hidinput, next, &hid->inputs, list) {
list_del(&hidinput->list);
+ input_unregister_device(hidinput->input);
kfree(hidinput);
}
}
diff --git a/drivers/usb/input/hid-lgff.c b/drivers/usb/input/hid-lgff.c
index 0c4c77a..f82c9c9 100644
--- a/drivers/usb/input/hid-lgff.c
+++ b/drivers/usb/input/hid-lgff.c
@@ -255,22 +255,19 @@
u16 idVendor = le16_to_cpu(hid->dev->descriptor.idVendor);
u16 idProduct = le16_to_cpu(hid->dev->descriptor.idProduct);
struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+ struct input_dev *input_dev = hidinput->input;
while (dev->idVendor && (idVendor != dev->idVendor || idProduct != dev->idProduct))
dev++;
- ff = dev->ff;
+ for (ff = dev->ff; *ff >= 0; ff++)
+ set_bit(*ff, input_dev->ffbit);
- while (*ff >= 0) {
- set_bit(*ff, hidinput->input.ffbit);
- ++ff;
- }
+ input_dev->upload_effect = hid_lgff_upload_effect;
+ input_dev->flush = hid_lgff_flush;
- hidinput->input.upload_effect = hid_lgff_upload_effect;
- hidinput->input.flush = hid_lgff_flush;
-
- set_bit(EV_FF, hidinput->input.evbit);
- hidinput->input.ff_effects_max = LGFF_EFFECTS;
+ set_bit(EV_FF, input_dev->evbit);
+ input_dev->ff_effects_max = LGFF_EFFECTS;
}
static void hid_lgff_exit(struct hid_device* hid)
diff --git a/drivers/usb/input/hid-tmff.c b/drivers/usb/input/hid-tmff.c
index 8f6a0a6..023fd5a 100644
--- a/drivers/usb/input/hid-tmff.c
+++ b/drivers/usb/input/hid-tmff.c
@@ -111,6 +111,7 @@
struct tmff_device *private;
struct list_head *pos;
struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+ struct input_dev *input_dev = hidinput->input;
private = kmalloc(sizeof(struct tmff_device), GFP_KERNEL);
if (!private)
@@ -155,7 +156,7 @@
private->report = report;
private->rumble = field;
- set_bit(FF_RUMBLE, hidinput->input.ffbit);
+ set_bit(FF_RUMBLE, input_dev->ffbit);
break;
default:
@@ -164,11 +165,11 @@
}
/* Fallthrough to here only when a valid usage is found */
- hidinput->input.upload_effect = hid_tmff_upload_effect;
- hidinput->input.flush = hid_tmff_flush;
+ input_dev->upload_effect = hid_tmff_upload_effect;
+ input_dev->flush = hid_tmff_flush;
- set_bit(EV_FF, hidinput->input.evbit);
- hidinput->input.ff_effects_max = TMFF_EFFECTS;
+ set_bit(EV_FF, input_dev->evbit);
+ input_dev->ff_effects_max = TMFF_EFFECTS;
}
}
diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h
index ec2412c..ee48a22 100644
--- a/drivers/usb/input/hid.h
+++ b/drivers/usb/input/hid.h
@@ -371,7 +371,7 @@
struct hid_input {
struct list_head list;
struct hid_report *report;
- struct input_dev input;
+ struct input_dev *input;
};
struct hid_device { /* device report descriptor */
diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c
index becb87e..3b58185 100644
--- a/drivers/usb/input/itmtouch.c
+++ b/drivers/usb/input/itmtouch.c
@@ -73,7 +73,7 @@
struct itmtouch_dev {
struct usb_device *usbdev; /* usb device */
- struct input_dev inputdev; /* input device */
+ struct input_dev *inputdev; /* input device */
struct urb *readurb; /* urb */
char rbuf[ITM_BUFSIZE]; /* data */
int users;
@@ -88,9 +88,9 @@
static void itmtouch_irq(struct urb *urb, struct pt_regs *regs)
{
- struct itmtouch_dev * itmtouch = urb->context;
+ struct itmtouch_dev *itmtouch = urb->context;
unsigned char *data = urb->transfer_buffer;
- struct input_dev *dev = &itmtouch->inputdev;
+ struct input_dev *dev = itmtouch->inputdev;
int retval;
switch (urb->status) {
@@ -156,49 +156,62 @@
static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct itmtouch_dev *itmtouch;
+ struct input_dev *input_dev;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = interface_to_usbdev(intf);
unsigned int pipe;
unsigned int maxp;
- char path[PATH_SIZE];
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
- if (!(itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL))) {
+ itmtouch = kzalloc(sizeof(struct itmtouch_dev), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!itmtouch || !input_dev) {
err("%s - Out of memory.", __FUNCTION__);
- return -ENOMEM;
+ goto fail;
}
itmtouch->usbdev = udev;
+ itmtouch->inputdev = input_dev;
- itmtouch->inputdev.private = itmtouch;
- itmtouch->inputdev.open = itmtouch_open;
- itmtouch->inputdev.close = itmtouch_close;
+ if (udev->manufacturer)
+ strlcpy(itmtouch->name, udev->manufacturer, sizeof(itmtouch->name));
- usb_make_path(udev, path, PATH_SIZE);
-
- itmtouch->inputdev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- itmtouch->inputdev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- itmtouch->inputdev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
- itmtouch->inputdev.name = itmtouch->name;
- itmtouch->inputdev.phys = itmtouch->phys;
- usb_to_input_id(udev, &itmtouch->inputdev.id);
- itmtouch->inputdev.dev = &intf->dev;
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(itmtouch->name, " ", sizeof(itmtouch->name));
+ strlcat(itmtouch->name, udev->product, sizeof(itmtouch->name));
+ }
if (!strlen(itmtouch->name))
sprintf(itmtouch->name, "USB ITM touchscreen");
+ usb_make_path(udev, itmtouch->phys, sizeof(itmtouch->phys));
+ strlcpy(itmtouch->phys, "/input0", sizeof(itmtouch->phys));
+
+ input_dev->name = itmtouch->name;
+ input_dev->phys = itmtouch->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = itmtouch;
+
+ input_dev->open = itmtouch_open;
+ input_dev->close = itmtouch_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+
/* device limits */
/* as specified by the ITM datasheet, X and Y are 12bit,
* Z (pressure) is 8 bit. However, the fields are defined up
* to 14 bits for future possible expansion.
*/
- input_set_abs_params(&itmtouch->inputdev, ABS_X, 0, 0x0FFF, 2, 0);
- input_set_abs_params(&itmtouch->inputdev, ABS_Y, 0, 0x0FFF, 2, 0);
- input_set_abs_params(&itmtouch->inputdev, ABS_PRESSURE, 0, 0xFF, 2, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, 0x0FFF, 2, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 0x0FFF, 2, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xFF, 2, 0);
/* initialise the URB so we can read from the transport stream */
pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress);
@@ -208,22 +221,23 @@
maxp = ITM_BUFSIZE;
itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL);
-
if (!itmtouch->readurb) {
dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__);
- kfree(itmtouch);
- return -ENOMEM;
+ goto fail;
}
usb_fill_int_urb(itmtouch->readurb, itmtouch->usbdev, pipe, itmtouch->rbuf,
maxp, itmtouch_irq, itmtouch, endpoint->bInterval);
- input_register_device(&itmtouch->inputdev);
+ input_register_device(itmtouch->inputdev);
- printk(KERN_INFO "itmtouch: %s registered on %s\n", itmtouch->name, path);
usb_set_intfdata(intf, itmtouch);
return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(itmtouch);
+ return -ENOMEM;
}
static void itmtouch_disconnect(struct usb_interface *intf)
@@ -233,7 +247,7 @@
usb_set_intfdata(intf, NULL);
if (itmtouch) {
- input_unregister_device(&itmtouch->inputdev);
+ input_unregister_device(itmtouch->inputdev);
usb_kill_urb(itmtouch->readurb);
usb_free_urb(itmtouch->readurb);
kfree(itmtouch);
diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c
index b6f6ac8..a248664 100644
--- a/drivers/usb/input/kbtab.c
+++ b/drivers/usb/input/kbtab.c
@@ -34,7 +34,7 @@
struct kbtab {
signed char *data;
dma_addr_t data_dma;
- struct input_dev dev;
+ struct input_dev *dev;
struct usb_device *usbdev;
struct urb *irq;
int x, y;
@@ -48,7 +48,7 @@
{
struct kbtab *kbtab = urb->context;
unsigned char *data = kbtab->data;
- struct input_dev *dev = &kbtab->dev;
+ struct input_dev *dev = kbtab->dev;
int retval;
switch (urb->status) {
@@ -124,53 +124,43 @@
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_endpoint_descriptor *endpoint;
struct kbtab *kbtab;
- char path[64];
+ struct input_dev *input_dev;
- if (!(kbtab = kmalloc(sizeof(struct kbtab), GFP_KERNEL)))
- return -ENOMEM;
- memset(kbtab, 0, sizeof(struct kbtab));
+ kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!kbtab || !input_dev)
+ goto fail1;
kbtab->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &kbtab->data_dma);
- if (!kbtab->data) {
- kfree(kbtab);
- return -ENOMEM;
- }
+ if (!kbtab->data)
+ goto fail1;
kbtab->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!kbtab->irq) {
- usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma);
- kfree(kbtab);
- return -ENOMEM;
- }
+ if (!kbtab->irq)
+ goto fail2;
- kbtab->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC);
- kbtab->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
-
- kbtab->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
-
- kbtab->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH);
-
- kbtab->dev.mscbit[0] |= BIT(MSC_SERIAL);
-
- kbtab->dev.absmax[ABS_X] = 0x2000;
- kbtab->dev.absmax[ABS_Y] = 0x1750;
- kbtab->dev.absmax[ABS_PRESSURE] = 0xff;
-
- kbtab->dev.absfuzz[ABS_X] = 4;
- kbtab->dev.absfuzz[ABS_Y] = 4;
-
- kbtab->dev.private = kbtab;
- kbtab->dev.open = kbtab_open;
- kbtab->dev.close = kbtab_close;
-
- usb_make_path(dev, path, 64);
- sprintf(kbtab->phys, "%s/input0", path);
-
- kbtab->dev.name = "KB Gear Tablet";
- kbtab->dev.phys = kbtab->phys;
- usb_to_input_id(dev, &kbtab->dev.id);
- kbtab->dev.dev = &intf->dev;
kbtab->usbdev = dev;
+ kbtab->dev = input_dev;
+
+ usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys));
+ strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys));
+
+ input_dev->name = "KB Gear Tablet";
+ input_dev->phys = kbtab->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = kbtab;
+
+ input_dev->open = kbtab_open;
+ input_dev->close = kbtab_close;
+
+ input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH);
+ input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+ input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, 0x1750, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
endpoint = &intf->cur_altsetting->endpoint[0].desc;
@@ -181,23 +171,25 @@
kbtab->irq->transfer_dma = kbtab->data_dma;
kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(&kbtab->dev);
-
- printk(KERN_INFO "input: KB Gear Tablet on %s\n", path);
+ input_register_device(kbtab->dev);
usb_set_intfdata(intf, kbtab);
-
return 0;
+
+fail2: usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma);
+fail1: input_free_device(input_dev);
+ kfree(kbtab);
+ return -ENOMEM;
}
static void kbtab_disconnect(struct usb_interface *intf)
{
- struct kbtab *kbtab = usb_get_intfdata (intf);
+ struct kbtab *kbtab = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
if (kbtab) {
usb_kill_urb(kbtab->irq);
- input_unregister_device(&kbtab->dev);
+ input_unregister_device(kbtab->dev);
usb_free_urb(kbtab->irq);
usb_buffer_free(interface_to_usbdev(intf), 10, kbtab->data, kbtab->data_dma);
kfree(kbtab);
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
index 99de1b3..5b8d65f 100644
--- a/drivers/usb/input/keyspan_remote.c
+++ b/drivers/usb/input/keyspan_remote.c
@@ -20,6 +20,7 @@
#include <linux/moduleparam.h>
#include <linux/input.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>
#define DRIVER_VERSION "v0.1"
#define DRIVER_AUTHOR "Michael Downey <downey@zymeta.com>"
@@ -75,7 +76,7 @@
char name[128];
char phys[64];
struct usb_device* udev;
- struct input_dev input;
+ struct input_dev *input;
struct usb_interface* interface;
struct usb_endpoint_descriptor* in_endpoint;
struct urb* irq_urb;
@@ -136,12 +137,11 @@
*/
static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
{
- char codes[4*RECV_SIZE];
+ char codes[4 * RECV_SIZE];
int i;
- for (i = 0; i < RECV_SIZE; i++) {
- snprintf(codes+i*3, 4, "%02x ", dev->in_buffer[i]);
- }
+ for (i = 0; i < RECV_SIZE; i++)
+ snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
dev_info(&dev->udev->dev, "%s\n", codes);
}
@@ -153,7 +153,7 @@
static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
{
if (dev->data.bits_left >= bits_needed)
- return(0);
+ return 0;
/*
* Somehow we've missed the last message. The message will be repeated
@@ -162,7 +162,7 @@
if (dev->data.pos >= dev->data.len) {
dev_dbg(&dev->udev, "%s - Error ran out of data. pos: %d, len: %d\n",
__FUNCTION__, dev->data.pos, dev->data.len);
- return(-1);
+ return -1;
}
/* Load as much as we can into the tester. */
@@ -172,7 +172,7 @@
dev->data.bits_left += 8;
}
- return(0);
+ return 0;
}
/*
@@ -311,10 +311,10 @@
__FUNCTION__, message.system, message.button, message.toggle);
if (message.toggle != remote->toggle) {
- input_regs(&remote->input, regs);
- input_report_key(&remote->input, keyspan_key_table[message.button], 1);
- input_report_key(&remote->input, keyspan_key_table[message.button], 0);
- input_sync(&remote->input);
+ input_regs(remote->input, regs);
+ input_report_key(remote->input, keyspan_key_table[message.button], 1);
+ input_report_key(remote->input, keyspan_key_table[message.button], 0);
+ input_sync(remote->input);
remote->toggle = message.toggle;
}
@@ -397,14 +397,9 @@
{
struct usb_keyspan *remote = dev->private;
- if (remote->open++)
- return 0;
-
remote->irq_urb->dev = remote->udev;
- if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) {
- remote->open--;
+ if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
return -EIO;
- }
return 0;
}
@@ -413,8 +408,26 @@
{
struct usb_keyspan *remote = dev->private;
- if (!--remote->open)
- usb_kill_urb(remote->irq_urb);
+ usb_kill_urb(remote->irq_urb);
+}
+
+static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
+{
+
+ struct usb_endpoint_descriptor *endpoint;
+ int i;
+
+ for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
+ endpoint = &iface->endpoint[i].desc;
+
+ if ((endpoint->bEndpointAddress & USB_DIR_IN) &&
+ ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+ /* we found our interrupt in endpoint */
+ return endpoint;
+ }
+ }
+
+ return NULL;
}
/*
@@ -422,110 +435,78 @@
*/
static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
- int i;
- int retval = -ENOMEM;
- char path[64];
- char *buf;
- struct usb_keyspan *remote = NULL;
- struct usb_host_interface *iface_desc;
+ struct usb_device *udev = interface_to_usbdev(interface);
struct usb_endpoint_descriptor *endpoint;
- struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
+ struct usb_keyspan *remote;
+ struct input_dev *input_dev;
+ int i, retval;
- /* allocate memory for our device state and initialize it */
- remote = kmalloc(sizeof(*remote), GFP_KERNEL);
- if (remote == NULL) {
- err("Out of memory\n");
- goto error;
+ endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
+ if (!endpoint)
+ return -ENODEV;
+
+ remote = kzalloc(sizeof(*remote), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!remote || !input_dev) {
+ retval = -ENOMEM;
+ goto fail1;
}
- memset(remote, 0x00, sizeof(*remote));
remote->udev = udev;
+ remote->input = input_dev;
remote->interface = interface;
+ remote->in_endpoint = endpoint;
remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */
- /* set up the endpoint information */
- /* use only the first in interrupt endpoint */
- iface_desc = interface->cur_altsetting;
- for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
- endpoint = &iface_desc->endpoint[i].desc;
-
- if (!remote->in_endpoint &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
- /* we found our interrupt in endpoint */
- remote->in_endpoint = endpoint;
-
- remote->in_buffer = usb_buffer_alloc(remote->udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma);
- if (!remote->in_buffer) {
- retval = -ENOMEM;
- goto error;
- }
- }
- }
-
- if (!remote->in_endpoint) {
- err("Could not find interrupt input endpoint.\n");
- retval = -ENODEV;
- goto error;
+ remote->in_buffer = usb_buffer_alloc(udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma);
+ if (!remote->in_buffer) {
+ retval = -ENOMEM;
+ goto fail1;
}
remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!remote->irq_urb) {
- err("Failed to allocate urb.\n");
retval = -ENOMEM;
- goto error;
+ goto fail2;
}
- retval = keyspan_setup(remote->udev);
+ retval = keyspan_setup(udev);
if (retval) {
- err("Failed to setup device.\n");
retval = -ENODEV;
- goto error;
+ goto fail3;
}
- /*
- * Setup the input system with the bits we are going to be reporting
- */
- remote->input.evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */
- for (i = 0; i < 32; ++i) {
- if (keyspan_key_table[i] != KEY_RESERVED) {
- set_bit(keyspan_key_table[i], remote->input.keybit);
- }
+ if (udev->manufacturer)
+ strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(remote->name, " ", sizeof(remote->name));
+ strlcat(remote->name, udev->product, sizeof(remote->name));
}
- remote->input.private = remote;
- remote->input.open = keyspan_open;
- remote->input.close = keyspan_close;
-
- usb_make_path(remote->udev, path, 64);
- sprintf(remote->phys, "%s/input0", path);
-
- remote->input.name = remote->name;
- remote->input.phys = remote->phys;
- remote->input.id.bustype = BUS_USB;
- remote->input.id.vendor = le16_to_cpu(remote->udev->descriptor.idVendor);
- remote->input.id.product = le16_to_cpu(remote->udev->descriptor.idProduct);
- remote->input.id.version = le16_to_cpu(remote->udev->descriptor.bcdDevice);
-
- if (!(buf = kmalloc(63, GFP_KERNEL))) {
- usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
- kfree(remote);
- return -ENOMEM;
- }
-
- if (remote->udev->descriptor.iManufacturer &&
- usb_string(remote->udev, remote->udev->descriptor.iManufacturer, buf, 63) > 0)
- strcat(remote->name, buf);
-
- if (remote->udev->descriptor.iProduct &&
- usb_string(remote->udev, remote->udev->descriptor.iProduct, buf, 63) > 0)
- sprintf(remote->name, "%s %s", remote->name, buf);
-
if (!strlen(remote->name))
- sprintf(remote->name, "USB Keyspan Remote %04x:%04x",
- remote->input.id.vendor, remote->input.id.product);
+ snprintf(remote->name, sizeof(remote->name),
+ "USB Keyspan Remote %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
- kfree(buf);
+ usb_make_path(udev, remote->phys, sizeof(remote->phys));
+ strlcat(remote->phys, "/input0", sizeof(remote->phys));
+
+ input_dev->name = remote->name;
+ input_dev->phys = remote->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &interface->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */
+ for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
+ if (keyspan_key_table[i] != KEY_RESERVED)
+ set_bit(keyspan_key_table[i], input_dev->keybit);
+
+ input_dev->private = remote;
+ input_dev->open = keyspan_open;
+ input_dev->close = keyspan_close;
/*
* Initialize the URB to access the device. The urb gets sent to the device in keyspan_open()
@@ -538,27 +519,17 @@
remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
/* we can register the device now, as it is ready */
- input_register_device(&remote->input);
+ input_register_device(remote->input);
/* save our data pointer in this interface device */
usb_set_intfdata(interface, remote);
- /* let the user know what node this device is now attached to */
- info("connected: %s on %s", remote->name, path);
return 0;
-error:
- /*
- * In case of error we need to clean up any allocated buffers
- */
- if (remote->irq_urb)
- usb_free_urb(remote->irq_urb);
-
- if (remote->in_buffer)
- usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
-
- if (remote)
- kfree(remote);
+ fail3: usb_free_urb(remote->irq_urb);
+ fail2: usb_buffer_free(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+ fail1: kfree(remote);
+ input_free_device(input_dev);
return retval;
}
@@ -570,23 +541,16 @@
{
struct usb_keyspan *remote;
- /* prevent keyspan_open() from racing keyspan_disconnect() */
- lock_kernel();
-
remote = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
if (remote) { /* We have a valid driver structure so clean up everything we allocated. */
- input_unregister_device(&remote->input);
+ input_unregister_device(remote->input);
usb_kill_urb(remote->irq_urb);
usb_free_urb(remote->irq_urb);
- usb_buffer_free(interface_to_usbdev(interface), RECV_SIZE, remote->in_buffer, remote->in_dma);
+ usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
kfree(remote);
}
-
- unlock_kernel();
-
- info("USB Keyspan now disconnected");
}
/*
diff --git a/drivers/usb/input/mtouchusb.c b/drivers/usb/input/mtouchusb.c
index ff92750..7fce526 100644
--- a/drivers/usb/input/mtouchusb.c
+++ b/drivers/usb/input/mtouchusb.c
@@ -98,7 +98,7 @@
dma_addr_t data_dma;
struct urb *irq;
struct usb_device *udev;
- struct input_dev input;
+ struct input_dev *input;
char name[128];
char phys[64];
};
@@ -135,14 +135,14 @@
goto exit;
}
- input_regs(&mtouch->input, regs);
- input_report_key(&mtouch->input, BTN_TOUCH,
+ input_regs(mtouch->input, regs);
+ input_report_key(mtouch->input, BTN_TOUCH,
MTOUCHUSB_GET_TOUCHED(mtouch->data));
- input_report_abs(&mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data));
- input_report_abs(&mtouch->input, ABS_Y,
+ input_report_abs(mtouch->input, ABS_X, MTOUCHUSB_GET_XC(mtouch->data));
+ input_report_abs(mtouch->input, ABS_Y,
(raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC)
- MTOUCHUSB_GET_YC(mtouch->data));
- input_sync(&mtouch->input);
+ input_sync(mtouch->input);
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -195,10 +195,10 @@
static int mtouchusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct mtouch_usb *mtouch;
+ struct input_dev *input_dev;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = interface_to_usbdev(intf);
- char path[64];
int nRet;
dbg("%s - called", __FUNCTION__);
@@ -209,57 +209,55 @@
dbg("%s - setting endpoint", __FUNCTION__);
endpoint = &interface->endpoint[0].desc;
- if (!(mtouch = kmalloc(sizeof(struct mtouch_usb), GFP_KERNEL))) {
+ mtouch = kzalloc(sizeof(struct mtouch_usb), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!mtouch || !input_dev) {
err("%s - Out of memory.", __FUNCTION__);
- return -ENOMEM;
+ goto fail1;
}
- memset(mtouch, 0, sizeof(struct mtouch_usb));
- mtouch->udev = udev;
-
dbg("%s - allocating buffers", __FUNCTION__);
- if (mtouchusb_alloc_buffers(udev, mtouch)) {
- mtouchusb_free_buffers(udev, mtouch);
- kfree(mtouch);
- return -ENOMEM;
- }
+ if (mtouchusb_alloc_buffers(udev, mtouch))
+ goto fail2;
- mtouch->input.private = mtouch;
- mtouch->input.open = mtouchusb_open;
- mtouch->input.close = mtouchusb_close;
-
- usb_make_path(udev, path, 64);
- sprintf(mtouch->phys, "%s/input0", path);
-
- mtouch->input.name = mtouch->name;
- mtouch->input.phys = mtouch->phys;
- usb_to_input_id(udev, &mtouch->input.id);
- mtouch->input.dev = &intf->dev;
-
- mtouch->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- mtouch->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
- mtouch->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
- /* Used to Scale Compensated Data and Flip Y */
- mtouch->input.absmin[ABS_X] = MTOUCHUSB_MIN_XC;
- mtouch->input.absmax[ABS_X] = raw_coordinates ?
- MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC;
- mtouch->input.absfuzz[ABS_X] = MTOUCHUSB_XC_FUZZ;
- mtouch->input.absflat[ABS_X] = MTOUCHUSB_XC_FLAT;
- mtouch->input.absmin[ABS_Y] = MTOUCHUSB_MIN_YC;
- mtouch->input.absmax[ABS_Y] = raw_coordinates ?
- MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC;
- mtouch->input.absfuzz[ABS_Y] = MTOUCHUSB_YC_FUZZ;
- mtouch->input.absflat[ABS_Y] = MTOUCHUSB_YC_FLAT;
+ mtouch->udev = udev;
+ mtouch->input = input_dev;
if (udev->manufacturer)
- strcat(mtouch->name, udev->manufacturer);
- if (udev->product)
- sprintf(mtouch->name, "%s %s", mtouch->name, udev->product);
+ strlcpy(mtouch->name, udev->manufacturer, sizeof(mtouch->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(mtouch->name, " ", sizeof(mtouch->name));
+ strlcat(mtouch->name, udev->product, sizeof(mtouch->name));
+ }
if (!strlen(mtouch->name))
- sprintf(mtouch->name, "USB Touchscreen %04x:%04x",
- mtouch->input.id.vendor, mtouch->input.id.product);
+ snprintf(mtouch->name, sizeof(mtouch->name),
+ "USB Touchscreen %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, mtouch->phys, sizeof(mtouch->phys));
+ strlcpy(mtouch->phys, "/input0", sizeof(mtouch->phys));
+
+ input_dev->name = mtouch->name;
+ input_dev->phys = mtouch->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = mtouch;
+
+ input_dev->open = mtouchusb_open;
+ input_dev->close = mtouchusb_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, MTOUCHUSB_MIN_XC,
+ raw_coordinates ? MTOUCHUSB_MAX_RAW_XC : MTOUCHUSB_MAX_CALIB_XC,
+ MTOUCHUSB_XC_FUZZ, MTOUCHUSB_XC_FLAT);
+ input_set_abs_params(input_dev, ABS_Y, MTOUCHUSB_MIN_YC,
+ raw_coordinates ? MTOUCHUSB_MAX_RAW_YC : MTOUCHUSB_MAX_CALIB_YC,
+ MTOUCHUSB_YC_FUZZ, MTOUCHUSB_YC_FLAT);
nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0),
MTOUCHUSB_RESET,
@@ -272,9 +270,7 @@
mtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
if (!mtouch->irq) {
dbg("%s - usb_alloc_urb failed: mtouch->irq", __FUNCTION__);
- mtouchusb_free_buffers(udev, mtouch);
- kfree(mtouch);
- return -ENOMEM;
+ goto fail2;
}
dbg("%s - usb_fill_int_urb", __FUNCTION__);
@@ -284,7 +280,7 @@
mtouchusb_irq, mtouch, endpoint->bInterval);
dbg("%s - input_register_device", __FUNCTION__);
- input_register_device(&mtouch->input);
+ input_register_device(mtouch->input);
nRet = usb_control_msg(mtouch->udev, usb_rcvctrlpipe(udev, 0),
MTOUCHUSB_ASYNC_REPORT,
@@ -293,10 +289,13 @@
dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
__FUNCTION__, nRet);
- printk(KERN_INFO "input: %s on %s\n", mtouch->name, path);
usb_set_intfdata(intf, mtouch);
-
return 0;
+
+fail2: mtouchusb_free_buffers(udev, mtouch);
+fail1: input_free_device(input_dev);
+ kfree(mtouch);
+ return -ENOMEM;
}
static void mtouchusb_disconnect(struct usb_interface *intf)
@@ -308,7 +307,7 @@
if (mtouch) {
dbg("%s - mtouch is initialized, cleaning up", __FUNCTION__);
usb_kill_urb(mtouch->irq);
- input_unregister_device(&mtouch->input);
+ input_unregister_device(mtouch->input);
usb_free_urb(mtouch->irq);
mtouchusb_free_buffers(interface_to_usbdev(intf), mtouch);
kfree(mtouch);
diff --git a/drivers/usb/input/pid.c b/drivers/usb/input/pid.c
index acc71ec..a00672c 100644
--- a/drivers/usb/input/pid.c
+++ b/drivers/usb/input/pid.c
@@ -262,6 +262,7 @@
{
struct hid_ff_pid *private;
struct hid_input *hidinput = list_entry(&hid->inputs, struct hid_input, list);
+ struct input_dev *input_dev = hidinput->input;
private = hid->ff_private = kzalloc(sizeof(struct hid_ff_pid), GFP_KERNEL);
if (!private)
@@ -281,11 +282,12 @@
usb_fill_control_urb(private->urbffout, hid->dev, 0,
(void *)&private->ffcr, private->ctrl_buffer, 8,
hid_pid_ctrl_out, hid);
- hidinput->input.upload_effect = hid_pid_upload_effect;
- hidinput->input.flush = hid_pid_flush;
- hidinput->input.ff_effects_max = 8; // A random default
- set_bit(EV_FF, hidinput->input.evbit);
- set_bit(EV_FF_STATUS, hidinput->input.evbit);
+
+ input_dev->upload_effect = hid_pid_upload_effect;
+ input_dev->flush = hid_pid_flush;
+ input_dev->ff_effects_max = 8; // A random default
+ set_bit(EV_FF, input_dev->evbit);
+ set_bit(EV_FF_STATUS, input_dev->evbit);
spin_lock_init(&private->lock);
diff --git a/drivers/usb/input/powermate.c b/drivers/usb/input/powermate.c
index ad4afe7..b747623 100644
--- a/drivers/usb/input/powermate.c
+++ b/drivers/usb/input/powermate.c
@@ -68,7 +68,7 @@
struct usb_ctrlrequest *configcr;
dma_addr_t configcr_dma;
struct usb_device *udev;
- struct input_dev input;
+ struct input_dev *input;
spinlock_t lock;
int static_brightness;
int pulse_speed;
@@ -106,10 +106,10 @@
}
/* handle updates to device state */
- input_regs(&pm->input, regs);
- input_report_key(&pm->input, BTN_0, pm->data[0] & 0x01);
- input_report_rel(&pm->input, REL_DIAL, pm->data[1]);
- input_sync(&pm->input);
+ input_regs(pm->input, regs);
+ input_report_key(pm->input, BTN_0, pm->data[0] & 0x01);
+ input_report_rel(pm->input, REL_DIAL, pm->data[1]);
+ input_sync(pm->input);
exit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
@@ -153,10 +153,10 @@
Only values of 'arg' quite close to 255 are particularly useful/spectacular.
*/
- if (pm->pulse_speed < 255){
+ if (pm->pulse_speed < 255) {
op = 0; // divide
arg = 255 - pm->pulse_speed;
- } else if (pm->pulse_speed > 255){
+ } else if (pm->pulse_speed > 255) {
op = 2; // multiply
arg = pm->pulse_speed - 255;
} else {
@@ -166,11 +166,11 @@
pm->configcr->wValue = cpu_to_le16( (pm->pulse_table << 8) | SET_PULSE_MODE );
pm->configcr->wIndex = cpu_to_le16( (arg << 8) | op );
pm->requires_update &= ~UPDATE_PULSE_MODE;
- }else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS){
+ } else if (pm->requires_update & UPDATE_STATIC_BRIGHTNESS) {
pm->configcr->wValue = cpu_to_le16( SET_STATIC_BRIGHTNESS );
pm->configcr->wIndex = cpu_to_le16( pm->static_brightness );
pm->requires_update &= ~UPDATE_STATIC_BRIGHTNESS;
- }else{
+ } else {
printk(KERN_ERR "powermate: unknown update required");
pm->requires_update = 0; /* fudge the bug */
return;
@@ -228,19 +228,19 @@
spin_lock_irqsave(&pm->lock, flags);
/* mark state updates which are required */
- if (static_brightness != pm->static_brightness){
+ if (static_brightness != pm->static_brightness) {
pm->static_brightness = static_brightness;
pm->requires_update |= UPDATE_STATIC_BRIGHTNESS;
}
- if (pulse_asleep != pm->pulse_asleep){
+ if (pulse_asleep != pm->pulse_asleep) {
pm->pulse_asleep = pulse_asleep;
pm->requires_update |= (UPDATE_PULSE_ASLEEP | UPDATE_STATIC_BRIGHTNESS);
}
- if (pulse_awake != pm->pulse_awake){
+ if (pulse_awake != pm->pulse_awake) {
pm->pulse_awake = pulse_awake;
pm->requires_update |= (UPDATE_PULSE_AWAKE | UPDATE_STATIC_BRIGHTNESS);
}
- if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table){
+ if (pulse_speed != pm->pulse_speed || pulse_table != pm->pulse_table) {
pm->pulse_speed = pulse_speed;
pm->pulse_table = pulse_table;
pm->requires_update |= UPDATE_PULSE_MODE;
@@ -283,6 +283,7 @@
SLAB_ATOMIC, &pm->data_dma);
if (!pm->data)
return -1;
+
pm->configcr = usb_buffer_alloc(udev, sizeof(*(pm->configcr)),
SLAB_ATOMIC, &pm->configcr_dma);
if (!pm->configcr)
@@ -308,8 +309,9 @@
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct powermate_device *pm;
+ struct input_dev *input_dev;
int pipe, maxp;
- char path[64];
+ int err = -ENOMEM;
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
@@ -323,42 +325,61 @@
0, interface->desc.bInterfaceNumber, NULL, 0,
USB_CTRL_SET_TIMEOUT);
- if (!(pm = kmalloc(sizeof(struct powermate_device), GFP_KERNEL)))
- return -ENOMEM;
+ pm = kzalloc(sizeof(struct powermate_device), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!pm || !input_dev)
+ goto fail1;
- memset(pm, 0, sizeof(struct powermate_device));
- pm->udev = udev;
-
- if (powermate_alloc_buffers(udev, pm)) {
- powermate_free_buffers(udev, pm);
- kfree(pm);
- return -ENOMEM;
- }
+ if (powermate_alloc_buffers(udev, pm))
+ goto fail2;
pm->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!pm->irq) {
- powermate_free_buffers(udev, pm);
- kfree(pm);
- return -ENOMEM;
- }
+ if (!pm->irq)
+ goto fail2;
pm->config = usb_alloc_urb(0, GFP_KERNEL);
- if (!pm->config) {
- usb_free_urb(pm->irq);
- powermate_free_buffers(udev, pm);
- kfree(pm);
- return -ENOMEM;
- }
+ if (!pm->config)
+ goto fail3;
+
+ pm->udev = udev;
+ pm->input = input_dev;
+
+ usb_make_path(udev, pm->phys, sizeof(pm->phys));
+ strlcpy(pm->phys, "/input0", sizeof(pm->phys));
spin_lock_init(&pm->lock);
- init_input_dev(&pm->input);
+
+ switch (le16_to_cpu(udev->descriptor.idProduct)) {
+ case POWERMATE_PRODUCT_NEW:
+ input_dev->name = pm_name_powermate;
+ break;
+ case POWERMATE_PRODUCT_OLD:
+ input_dev->name = pm_name_soundknob;
+ break;
+ default:
+ input_dev->name = pm_name_soundknob;
+ printk(KERN_WARNING "powermate: unknown product id %04x\n",
+ le16_to_cpu(udev->descriptor.idProduct));
+ }
+
+ input_dev->phys = pm->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = pm;
+
+ input_dev->event = powermate_input_event;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC);
+ input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0);
+ input_dev->relbit[LONG(REL_DIAL)] = BIT(REL_DIAL);
+ input_dev->mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED);
/* get a handle to the interrupt data pipe */
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
- if(maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX){
- printk("powermate: Expected payload of %d--%d bytes, found %d bytes!\n",
+ if (maxp < POWERMATE_PAYLOAD_SIZE_MIN || maxp > POWERMATE_PAYLOAD_SIZE_MAX) {
+ printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n",
POWERMATE_PAYLOAD_SIZE_MIN, POWERMATE_PAYLOAD_SIZE_MAX, maxp);
maxp = POWERMATE_PAYLOAD_SIZE_MAX;
}
@@ -371,35 +392,11 @@
/* register our interrupt URB with the USB system */
if (usb_submit_urb(pm->irq, GFP_KERNEL)) {
- powermate_free_buffers(udev, pm);
- kfree(pm);
- return -EIO; /* failure */
+ err = -EIO;
+ goto fail4;
}
- switch (le16_to_cpu(udev->descriptor.idProduct)) {
- case POWERMATE_PRODUCT_NEW: pm->input.name = pm_name_powermate; break;
- case POWERMATE_PRODUCT_OLD: pm->input.name = pm_name_soundknob; break;
- default:
- pm->input.name = pm_name_soundknob;
- printk(KERN_WARNING "powermate: unknown product id %04x\n",
- le16_to_cpu(udev->descriptor.idProduct));
- }
-
- pm->input.private = pm;
- pm->input.evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_MSC);
- pm->input.keybit[LONG(BTN_0)] = BIT(BTN_0);
- pm->input.relbit[LONG(REL_DIAL)] = BIT(REL_DIAL);
- pm->input.mscbit[LONG(MSC_PULSELED)] = BIT(MSC_PULSELED);
- usb_to_input_id(udev, &pm->input.id);
- pm->input.event = powermate_input_event;
- pm->input.dev = &intf->dev;
- pm->input.phys = pm->phys;
-
- input_register_device(&pm->input);
-
- usb_make_path(udev, path, 64);
- snprintf(pm->phys, 64, "%s/input0", path);
- printk(KERN_INFO "input: %s on %s\n", pm->input.name, pm->input.phys);
+ input_register_device(pm->input);
/* force an update of everything */
pm->requires_update = UPDATE_PULSE_ASLEEP | UPDATE_PULSE_AWAKE | UPDATE_PULSE_MODE | UPDATE_STATIC_BRIGHTNESS;
@@ -407,6 +404,13 @@
usb_set_intfdata(intf, pm);
return 0;
+
+fail4: usb_free_urb(pm->config);
+fail3: usb_free_urb(pm->irq);
+fail2: powermate_free_buffers(udev, pm);
+fail1: input_free_device(input_dev);
+ kfree(pm);
+ return err;
}
/* Called when a USB device we've accepted ownership of is removed */
@@ -418,7 +422,7 @@
if (pm) {
pm->requires_update = 0;
usb_kill_urb(pm->irq);
- input_unregister_device(&pm->input);
+ input_unregister_device(pm->input);
usb_free_urb(pm->irq);
usb_free_urb(pm->config);
powermate_free_buffers(interface_to_usbdev(intf), pm);
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index 4276c24..3766ccc 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -68,7 +68,7 @@
dma_addr_t data_dma;
struct urb *irq;
struct usb_device *udev;
- struct input_dev input;
+ struct input_dev *input;
char name[128];
char phys[64];
};
@@ -115,12 +115,12 @@
y = TOUCHKIT_GET_Y(touchkit->data);
}
- input_regs(&touchkit->input, regs);
- input_report_key(&touchkit->input, BTN_TOUCH,
+ input_regs(touchkit->input, regs);
+ input_report_key(touchkit->input, BTN_TOUCH,
TOUCHKIT_GET_TOUCHED(touchkit->data));
- input_report_abs(&touchkit->input, ABS_X, x);
- input_report_abs(&touchkit->input, ABS_Y, y);
- input_sync(&touchkit->input);
+ input_report_abs(touchkit->input, ABS_X, x);
+ input_report_abs(touchkit->input, ABS_Y, y);
+ input_sync(touchkit->input);
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -171,87 +171,81 @@
static int touchkit_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- int ret;
struct touchkit_usb *touchkit;
+ struct input_dev *input_dev;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = interface_to_usbdev(intf);
- char path[64];
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
- touchkit = kmalloc(sizeof(struct touchkit_usb), GFP_KERNEL);
- if (!touchkit)
- return -ENOMEM;
-
- memset(touchkit, 0, sizeof(struct touchkit_usb));
- touchkit->udev = udev;
-
- if (touchkit_alloc_buffers(udev, touchkit)) {
- ret = -ENOMEM;
+ touchkit = kzalloc(sizeof(struct touchkit_usb), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!touchkit || !input_dev)
goto out_free;
- }
- touchkit->input.private = touchkit;
- touchkit->input.open = touchkit_open;
- touchkit->input.close = touchkit_close;
-
- usb_make_path(udev, path, 64);
- sprintf(touchkit->phys, "%s/input0", path);
-
- touchkit->input.name = touchkit->name;
- touchkit->input.phys = touchkit->phys;
- usb_to_input_id(udev, &touchkit->input.id);
- touchkit->input.dev = &intf->dev;
-
- touchkit->input.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
- touchkit->input.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
- touchkit->input.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-
- /* Used to Scale Compensated Data */
- touchkit->input.absmin[ABS_X] = TOUCHKIT_MIN_XC;
- touchkit->input.absmax[ABS_X] = TOUCHKIT_MAX_XC;
- touchkit->input.absfuzz[ABS_X] = TOUCHKIT_XC_FUZZ;
- touchkit->input.absflat[ABS_X] = TOUCHKIT_XC_FLAT;
- touchkit->input.absmin[ABS_Y] = TOUCHKIT_MIN_YC;
- touchkit->input.absmax[ABS_Y] = TOUCHKIT_MAX_YC;
- touchkit->input.absfuzz[ABS_Y] = TOUCHKIT_YC_FUZZ;
- touchkit->input.absflat[ABS_Y] = TOUCHKIT_YC_FLAT;
-
- if (udev->manufacturer)
- strcat(touchkit->name, udev->manufacturer);
- if (udev->product)
- sprintf(touchkit->name, "%s %s", touchkit->name, udev->product);
-
- if (!strlen(touchkit->name))
- sprintf(touchkit->name, "USB Touchscreen %04x:%04x",
- touchkit->input.id.vendor, touchkit->input.id.product);
+ if (touchkit_alloc_buffers(udev, touchkit))
+ goto out_free;
touchkit->irq = usb_alloc_urb(0, GFP_KERNEL);
if (!touchkit->irq) {
dbg("%s - usb_alloc_urb failed: touchkit->irq", __FUNCTION__);
- ret = -ENOMEM;
goto out_free_buffers;
}
+ touchkit->udev = udev;
+ touchkit->input = input_dev;
+
+ if (udev->manufacturer)
+ strlcpy(touchkit->name, udev->manufacturer, sizeof(touchkit->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(touchkit->name, " ", sizeof(touchkit->name));
+ strlcat(touchkit->name, udev->product, sizeof(touchkit->name));
+ }
+
+ if (!strlen(touchkit->name))
+ snprintf(touchkit->name, sizeof(touchkit->name),
+ "USB Touchscreen %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, touchkit->phys, sizeof(touchkit->phys));
+ strlcpy(touchkit->phys, "/input0", sizeof(touchkit->phys));
+
+ input_dev->name = touchkit->name;
+ input_dev->phys = touchkit->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = touchkit;
+ input_dev->open = touchkit_open;
+ input_dev->close = touchkit_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, TOUCHKIT_MIN_XC, TOUCHKIT_MAX_XC,
+ TOUCHKIT_XC_FUZZ, TOUCHKIT_XC_FLAT);
+ input_set_abs_params(input_dev, ABS_Y, TOUCHKIT_MIN_YC, TOUCHKIT_MAX_YC,
+ TOUCHKIT_YC_FUZZ, TOUCHKIT_YC_FLAT);
+
usb_fill_int_urb(touchkit->irq, touchkit->udev,
- usb_rcvintpipe(touchkit->udev, 0x81),
- touchkit->data, TOUCHKIT_REPORT_DATA_SIZE,
- touchkit_irq, touchkit, endpoint->bInterval);
+ usb_rcvintpipe(touchkit->udev, 0x81),
+ touchkit->data, TOUCHKIT_REPORT_DATA_SIZE,
+ touchkit_irq, touchkit, endpoint->bInterval);
- input_register_device(&touchkit->input);
+ input_register_device(touchkit->input);
- printk(KERN_INFO "input: %s on %s\n", touchkit->name, path);
usb_set_intfdata(intf, touchkit);
-
return 0;
out_free_buffers:
touchkit_free_buffers(udev, touchkit);
out_free:
+ input_free_device(input_dev);
kfree(touchkit);
- return ret;
+ return -ENOMEM;
}
static void touchkit_disconnect(struct usb_interface *intf)
@@ -265,8 +259,8 @@
dbg("%s - touchkit is initialized, cleaning up", __FUNCTION__);
usb_set_intfdata(intf, NULL);
- input_unregister_device(&touchkit->input);
usb_kill_urb(touchkit->irq);
+ input_unregister_device(touchkit->input);
usb_free_urb(touchkit->irq);
touchkit_free_buffers(interface_to_usbdev(intf), touchkit);
kfree(touchkit);
diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c
index 28987f1..226b6f9 100644
--- a/drivers/usb/input/usbkbd.c
+++ b/drivers/usb/input/usbkbd.c
@@ -66,7 +66,7 @@
};
struct usb_kbd {
- struct input_dev dev;
+ struct input_dev *dev;
struct usb_device *usbdev;
unsigned char old[8];
struct urb *irq, *led;
@@ -99,29 +99,29 @@
goto resubmit;
}
- input_regs(&kbd->dev, regs);
+ input_regs(kbd->dev, regs);
for (i = 0; i < 8; i++)
- input_report_key(&kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1);
+ input_report_key(kbd->dev, usb_kbd_keycode[i + 224], (kbd->new[0] >> i) & 1);
for (i = 2; i < 8; i++) {
if (kbd->old[i] > 3 && memscan(kbd->new + 2, kbd->old[i], 6) == kbd->new + 8) {
if (usb_kbd_keycode[kbd->old[i]])
- input_report_key(&kbd->dev, usb_kbd_keycode[kbd->old[i]], 0);
+ input_report_key(kbd->dev, usb_kbd_keycode[kbd->old[i]], 0);
else
info("Unknown key (scancode %#x) released.", kbd->old[i]);
}
if (kbd->new[i] > 3 && memscan(kbd->old + 2, kbd->new[i], 6) == kbd->old + 8) {
if (usb_kbd_keycode[kbd->new[i]])
- input_report_key(&kbd->dev, usb_kbd_keycode[kbd->new[i]], 1);
+ input_report_key(kbd->dev, usb_kbd_keycode[kbd->new[i]], 1);
else
info("Unknown key (scancode %#x) pressed.", kbd->new[i]);
}
}
- input_sync(&kbd->dev);
+ input_sync(kbd->dev);
memcpy(kbd->old, kbd->new, 8);
@@ -227,12 +227,12 @@
static int usb_kbd_probe(struct usb_interface *iface,
const struct usb_device_id *id)
{
- struct usb_device * dev = interface_to_usbdev(iface);
+ struct usb_device *dev = interface_to_usbdev(iface);
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_kbd *kbd;
+ struct input_dev *input_dev;
int i, pipe, maxp;
- char path[64];
interface = iface->cur_altsetting;
@@ -240,37 +240,59 @@
return -ENODEV;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & 0x80))
+ if (!(endpoint->bEndpointAddress & USB_DIR_IN))
return -ENODEV;
- if ((endpoint->bmAttributes & 3) != 3)
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
return -ENODEV;
pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
- if (!(kbd = kmalloc(sizeof(struct usb_kbd), GFP_KERNEL)))
- return -ENOMEM;
- memset(kbd, 0, sizeof(struct usb_kbd));
+ kbd = kzalloc(sizeof(struct usb_kbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!kbd || !input_dev)
+ goto fail1;
- if (usb_kbd_alloc_mem(dev, kbd)) {
- usb_kbd_free_mem(dev, kbd);
- kfree(kbd);
- return -ENOMEM;
- }
+ if (usb_kbd_alloc_mem(dev, kbd))
+ goto fail2;
kbd->usbdev = dev;
+ kbd->dev = input_dev;
- kbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
- kbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA);
+ if (dev->manufacturer)
+ strlcpy(kbd->name, dev->manufacturer, sizeof(kbd->name));
+
+ if (dev->product) {
+ if (dev->manufacturer)
+ strlcat(kbd->name, " ", sizeof(kbd->name));
+ strlcat(kbd->name, dev->product, sizeof(kbd->name));
+ }
+
+ if (!strlen(kbd->name))
+ snprintf(kbd->name, sizeof(kbd->name),
+ "USB HIDBP Keyboard %04x:%04x",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ usb_make_path(dev, kbd->phys, sizeof(kbd->phys));
+ strlcpy(kbd->phys, "/input0", sizeof(kbd->phys));
+
+ input_dev->name = kbd->name;
+ input_dev->phys = kbd->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &iface->dev;
+ input_dev->private = kbd;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
+ input_dev->ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL) | BIT(LED_COMPOSE) | BIT(LED_KANA);
for (i = 0; i < 255; i++)
- set_bit(usb_kbd_keycode[i], kbd->dev.keybit);
- clear_bit(0, kbd->dev.keybit);
+ set_bit(usb_kbd_keycode[i], input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
- kbd->dev.private = kbd;
- kbd->dev.event = usb_kbd_event;
- kbd->dev.open = usb_kbd_open;
- kbd->dev.close = usb_kbd_close;
+ input_dev->event = usb_kbd_event;
+ input_dev->open = usb_kbd_open;
+ input_dev->close = usb_kbd_close;
usb_fill_int_urb(kbd->irq, dev, pipe,
kbd->new, (maxp > 8 ? 8 : maxp),
@@ -284,37 +306,22 @@
kbd->cr->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
kbd->cr->wLength = cpu_to_le16(1);
- usb_make_path(dev, path, 64);
- sprintf(kbd->phys, "%s/input0", path);
-
- kbd->dev.name = kbd->name;
- kbd->dev.phys = kbd->phys;
- usb_to_input_id(dev, &kbd->dev.id);
- kbd->dev.dev = &iface->dev;
-
- if (dev->manufacturer)
- strcat(kbd->name, dev->manufacturer);
- if (dev->product)
- sprintf(kbd->name, "%s %s", kbd->name, dev->product);
-
- if (!strlen(kbd->name))
- sprintf(kbd->name, "USB HIDBP Keyboard %04x:%04x",
- kbd->dev.id.vendor, kbd->dev.id.product);
-
usb_fill_control_urb(kbd->led, dev, usb_sndctrlpipe(dev, 0),
(void *) kbd->cr, kbd->leds, 1,
usb_kbd_led, kbd);
kbd->led->setup_dma = kbd->cr_dma;
kbd->led->transfer_dma = kbd->leds_dma;
- kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP
- | URB_NO_SETUP_DMA_MAP);
+ kbd->led->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
- input_register_device(&kbd->dev);
-
- printk(KERN_INFO "input: %s on %s\n", kbd->name, path);
+ input_register_device(kbd->dev);
usb_set_intfdata(iface, kbd);
return 0;
+
+fail2: usb_kbd_free_mem(dev, kbd);
+fail1: input_free_device(input_dev);
+ kfree(kbd);
+ return -ENOMEM;
}
static void usb_kbd_disconnect(struct usb_interface *intf)
@@ -324,7 +331,7 @@
usb_set_intfdata(intf, NULL);
if (kbd) {
usb_kill_urb(kbd->irq);
- input_unregister_device(&kbd->dev);
+ input_unregister_device(kbd->dev);
usb_kbd_free_mem(interface_to_usbdev(intf), kbd);
kfree(kbd);
}
diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c
index 4104dec..230f6b1 100644
--- a/drivers/usb/input/usbmouse.c
+++ b/drivers/usb/input/usbmouse.c
@@ -50,7 +50,7 @@
char name[128];
char phys[64];
struct usb_device *usbdev;
- struct input_dev dev;
+ struct input_dev *dev;
struct urb *irq;
signed char *data;
@@ -61,7 +61,7 @@
{
struct usb_mouse *mouse = urb->context;
signed char *data = mouse->data;
- struct input_dev *dev = &mouse->dev;
+ struct input_dev *dev = mouse->dev;
int status;
switch (urb->status) {
@@ -115,14 +115,14 @@
usb_kill_urb(mouse->irq);
}
-static int usb_mouse_probe(struct usb_interface * intf, const struct usb_device_id * id)
+static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
- struct usb_device * dev = interface_to_usbdev(intf);
+ struct usb_device *dev = interface_to_usbdev(intf);
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_mouse *mouse;
+ struct input_dev *input_dev;
int pipe, maxp;
- char path[64];
interface = intf->cur_altsetting;
@@ -130,59 +130,62 @@
return -ENODEV;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & 0x80))
+ if (!(endpoint->bEndpointAddress & USB_DIR_IN))
return -ENODEV;
- if ((endpoint->bmAttributes & 3) != 3)
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
return -ENODEV;
pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
- if (!(mouse = kmalloc(sizeof(struct usb_mouse), GFP_KERNEL)))
- return -ENOMEM;
- memset(mouse, 0, sizeof(struct usb_mouse));
+ mouse = kzalloc(sizeof(struct usb_mouse), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!mouse || !input_dev)
+ goto fail1;
mouse->data = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &mouse->data_dma);
- if (!mouse->data) {
- kfree(mouse);
- return -ENOMEM;
- }
+ if (!mouse->data)
+ goto fail1;
mouse->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!mouse->irq) {
- usb_buffer_free(dev, 8, mouse->data, mouse->data_dma);
- kfree(mouse);
- return -ENODEV;
- }
+ if (!mouse->irq)
+ goto fail2;
mouse->usbdev = dev;
-
- mouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
- mouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
- mouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
- mouse->dev.keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA);
- mouse->dev.relbit[0] |= BIT(REL_WHEEL);
-
- mouse->dev.private = mouse;
- mouse->dev.open = usb_mouse_open;
- mouse->dev.close = usb_mouse_close;
-
- usb_make_path(dev, path, 64);
- sprintf(mouse->phys, "%s/input0", path);
-
- mouse->dev.name = mouse->name;
- mouse->dev.phys = mouse->phys;
- usb_to_input_id(dev, &mouse->dev.id);
- mouse->dev.dev = &intf->dev;
+ mouse->dev = input_dev;
if (dev->manufacturer)
- strcat(mouse->name, dev->manufacturer);
- if (dev->product)
- sprintf(mouse->name, "%s %s", mouse->name, dev->product);
+ strlcpy(mouse->name, dev->manufacturer, sizeof(mouse->name));
+
+ if (dev->product) {
+ if (dev->manufacturer)
+ strlcat(mouse->name, " ", sizeof(mouse->name));
+ strlcat(mouse->name, dev->product, sizeof(mouse->name));
+ }
if (!strlen(mouse->name))
- sprintf(mouse->name, "USB HIDBP Mouse %04x:%04x",
- mouse->dev.id.vendor, mouse->dev.id.product);
+ snprintf(mouse->name, sizeof(mouse->name),
+ "USB HIDBP Mouse %04x:%04x",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ usb_make_path(dev, mouse->phys, sizeof(mouse->phys));
+ strlcat(mouse->phys, "/input0", sizeof(mouse->phys));
+
+ input_dev->name = mouse->name;
+ input_dev->phys = mouse->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+ input_dev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+ input_dev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ input_dev->keybit[LONG(BTN_MOUSE)] |= BIT(BTN_SIDE) | BIT(BTN_EXTRA);
+ input_dev->relbit[0] |= BIT(REL_WHEEL);
+
+ input_dev->private = mouse;
+ input_dev->open = usb_mouse_open;
+ input_dev->close = usb_mouse_close;
usb_fill_int_urb(mouse->irq, dev, pipe, mouse->data,
(maxp > 8 ? 8 : maxp),
@@ -190,11 +193,15 @@
mouse->irq->transfer_dma = mouse->data_dma;
mouse->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(&mouse->dev);
- printk(KERN_INFO "input: %s on %s\n", mouse->name, path);
+ input_register_device(mouse->dev);
usb_set_intfdata(intf, mouse);
return 0;
+
+fail2: usb_buffer_free(dev, 8, mouse->data, mouse->data_dma);
+fail1: input_free_device(input_dev);
+ kfree(mouse);
+ return -ENOMEM;
}
static void usb_mouse_disconnect(struct usb_interface *intf)
@@ -204,7 +211,7 @@
usb_set_intfdata(intf, NULL);
if (mouse) {
usb_kill_urb(mouse->irq);
- input_unregister_device(&mouse->dev);
+ input_unregister_device(mouse->dev);
usb_free_urb(mouse->irq);
usb_buffer_free(interface_to_usbdev(intf), 8, mouse->data, mouse->data_dma);
kfree(mouse);
diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c
index 3b266af..ea0f757 100644
--- a/drivers/usb/input/wacom.c
+++ b/drivers/usb/input/wacom.c
@@ -111,7 +111,7 @@
struct wacom {
signed char *data;
dma_addr_t data_dma;
- struct input_dev dev;
+ struct input_dev *dev;
struct usb_device *usbdev;
struct urb *irq;
struct wacom_features *features;
@@ -135,7 +135,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
int prox, pressure;
int retval;
@@ -225,7 +225,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
int retval;
switch (urb->status) {
@@ -275,7 +275,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
int retval;
switch (urb->status) {
@@ -318,7 +318,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
int x, y;
int retval;
@@ -397,7 +397,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
int idx;
/* tool number */
@@ -479,7 +479,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
unsigned int t;
/* general pen packet */
@@ -509,7 +509,7 @@
{
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
- struct input_dev *dev = &wacom->dev;
+ struct input_dev *dev = wacom->dev;
unsigned int t;
int idx;
int retval;
@@ -738,95 +738,83 @@
{
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_endpoint_descriptor *endpoint;
- char rep_data[2] = {0x02, 0x02};
struct wacom *wacom;
- char path[64];
+ struct input_dev *input_dev;
+ char rep_data[2] = {0x02, 0x02};
- if (!(wacom = kmalloc(sizeof(struct wacom), GFP_KERNEL)))
- return -ENOMEM;
- memset(wacom, 0, sizeof(struct wacom));
+ wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!wacom || !input_dev)
+ goto fail1;
wacom->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma);
- if (!wacom->data) {
- kfree(wacom);
- return -ENOMEM;
- }
+ if (!wacom->data)
+ goto fail1;
wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!wacom->irq) {
- usb_buffer_free(dev, 10, wacom->data, wacom->data_dma);
- kfree(wacom);
- return -ENOMEM;
- }
+ if (!wacom->irq)
+ goto fail2;
+
+ wacom->usbdev = dev;
+ wacom->dev = input_dev;
+ usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
+ strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
wacom->features = wacom_features + (id - wacom_ids);
+ if (wacom->features->pktlen > 10)
+ BUG();
- wacom->dev.evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
- wacom->dev.absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
- wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
+ input_dev->name = wacom->features->name;
+ usb_to_input_id(dev, &input_dev->id);
+
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = wacom;
+ input_dev->open = wacom_open;
+ input_dev->close = wacom_close;
+
+ input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
+ input_set_abs_params(input_dev, ABS_X, 0, wacom->features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0);
switch (wacom->features->type) {
case GRAPHIRE:
- wacom->dev.evbit[0] |= BIT(EV_REL);
- wacom->dev.relbit[0] |= BIT(REL_WHEEL);
- wacom->dev.absbit[0] |= BIT(ABS_DISTANCE);
- wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
- wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
+ input_dev->evbit[0] |= BIT(EV_REL);
+ input_dev->relbit[0] |= BIT(REL_WHEEL);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
+ input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0);
break;
case INTUOS3:
case CINTIQ:
- wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
- wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
- wacom->dev.absbit[0] |= BIT(ABS_RX) | BIT(ABS_RY);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
+ input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0);
/* fall through */
case INTUOS:
- wacom->dev.evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
- wacom->dev.mscbit[0] |= BIT(MSC_SERIAL);
- wacom->dev.relbit[0] |= BIT(REL_WHEEL);
- wacom->dev.keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
- wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH)
+ input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
+ input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+ input_dev->relbit[0] |= BIT(REL_WHEEL);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_TOOL_BRUSH)
| BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2);
- wacom->dev.absbit[0] |= BIT(ABS_DISTANCE) | BIT(ABS_WHEEL) | BIT(ABS_TILT_X) | BIT(ABS_TILT_Y) | BIT(ABS_RZ) | BIT(ABS_THROTTLE);
+ input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom->features->distance_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
+ input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
+ input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
+ input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
+ input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
break;
case PL:
- wacom->dev.keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
break;
}
- wacom->dev.absmax[ABS_X] = wacom->features->x_max;
- wacom->dev.absmax[ABS_Y] = wacom->features->y_max;
- wacom->dev.absmax[ABS_PRESSURE] = wacom->features->pressure_max;
- wacom->dev.absmax[ABS_DISTANCE] = wacom->features->distance_max;
- wacom->dev.absmax[ABS_TILT_X] = 127;
- wacom->dev.absmax[ABS_TILT_Y] = 127;
- wacom->dev.absmax[ABS_WHEEL] = 1023;
-
- wacom->dev.absmax[ABS_RX] = 4097;
- wacom->dev.absmax[ABS_RY] = 4097;
- wacom->dev.absmin[ABS_RZ] = -900;
- wacom->dev.absmax[ABS_RZ] = 899;
- wacom->dev.absmin[ABS_THROTTLE] = -1023;
- wacom->dev.absmax[ABS_THROTTLE] = 1023;
-
- wacom->dev.absfuzz[ABS_X] = 4;
- wacom->dev.absfuzz[ABS_Y] = 4;
-
- wacom->dev.private = wacom;
- wacom->dev.open = wacom_open;
- wacom->dev.close = wacom_close;
-
- usb_make_path(dev, path, 64);
- sprintf(wacom->phys, "%s/input0", path);
-
- wacom->dev.name = wacom->features->name;
- wacom->dev.phys = wacom->phys;
- usb_to_input_id(dev, &wacom->dev.id);
- wacom->dev.dev = &intf->dev;
- wacom->usbdev = dev;
-
endpoint = &intf->cur_altsetting->endpoint[0].desc;
if (wacom->features->pktlen > 10)
@@ -839,18 +827,20 @@
wacom->irq->transfer_dma = wacom->data_dma;
wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- input_register_device(&wacom->dev);
+ input_register_device(wacom->dev);
/* ask the tablet to report tablet data */
usb_set_report(intf, 3, 2, rep_data, 2);
/* repeat once (not sure why the first call often fails) */
usb_set_report(intf, 3, 2, rep_data, 2);
- printk(KERN_INFO "input: %s on %s\n", wacom->features->name, path);
-
usb_set_intfdata(intf, wacom);
-
return 0;
+
+fail2: usb_buffer_free(dev, 10, wacom->data, wacom->data_dma);
+fail1: input_free_device(input_dev);
+ kfree(wacom);
+ return -ENOMEM;
}
static void wacom_disconnect(struct usb_interface *intf)
@@ -860,7 +850,7 @@
usb_set_intfdata(intf, NULL);
if (wacom) {
usb_kill_urb(wacom->irq);
- input_unregister_device(&wacom->dev);
+ input_unregister_device(wacom->dev);
usb_free_urb(wacom->irq);
usb_buffer_free(interface_to_usbdev(intf), 10, wacom->data, wacom->data_dma);
kfree(wacom);
diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c
index 18125e0..43112f0 100644
--- a/drivers/usb/input/xpad.c
+++ b/drivers/usb/input/xpad.c
@@ -103,7 +103,7 @@
MODULE_DEVICE_TABLE (usb, xpad_table);
struct usb_xpad {
- struct input_dev dev; /* input device interface */
+ struct input_dev *dev; /* input device interface */
struct usb_device *udev; /* usb device */
struct urb *irq_in; /* urb for interrupt in report */
@@ -125,7 +125,7 @@
static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data, struct pt_regs *regs)
{
- struct input_dev *dev = &xpad->dev;
+ struct input_dev *dev = xpad->dev;
input_regs(dev, regs);
@@ -214,9 +214,9 @@
static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev (intf);
- struct usb_xpad *xpad = NULL;
+ struct usb_xpad *xpad;
+ struct input_dev *input_dev;
struct usb_endpoint_descriptor *ep_irq_in;
- char path[64];
int i;
for (i = 0; xpad_device[i].idVendor; i++) {
@@ -225,29 +225,63 @@
break;
}
- if ((xpad = kmalloc (sizeof(struct usb_xpad), GFP_KERNEL)) == NULL) {
- err("cannot allocate memory for new pad");
- return -ENOMEM;
- }
- memset(xpad, 0, sizeof(struct usb_xpad));
+ xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!xpad || !input_dev)
+ goto fail1;
xpad->idata = usb_buffer_alloc(udev, XPAD_PKT_LEN,
SLAB_ATOMIC, &xpad->idata_dma);
- if (!xpad->idata) {
- kfree(xpad);
- return -ENOMEM;
- }
+ if (!xpad->idata)
+ goto fail1;
xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
- if (!xpad->irq_in) {
- err("cannot allocate memory for new pad irq urb");
- usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
- kfree(xpad);
- return -ENOMEM;
- }
+ if (!xpad->irq_in)
+ goto fail2;
+
+ xpad->udev = udev;
+ xpad->dev = input_dev;
+ usb_make_path(udev, xpad->phys, sizeof(xpad->phys));
+ strlcat(xpad->phys, "/input0", sizeof(xpad->phys));
+
+ input_dev->name = xpad_device[i].name;
+ input_dev->phys = xpad->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = xpad;
+ input_dev->open = xpad_open;
+ input_dev->close = xpad_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+ for (i = 0; xpad_btn[i] >= 0; i++)
+ set_bit(xpad_btn[i], input_dev->keybit);
+
+ for (i = 0; xpad_abs[i] >= 0; i++) {
+
+ signed short t = xpad_abs[i];
+
+ set_bit(t, input_dev->absbit);
+
+ switch (t) {
+ case ABS_X:
+ case ABS_Y:
+ case ABS_RX:
+ case ABS_RY: /* the two sticks */
+ input_set_abs_params(input_dev, t, -32768, 32767, 16, 128);
+ break;
+ case ABS_Z:
+ case ABS_RZ: /* the triggers */
+ input_set_abs_params(input_dev, t, 0, 255, 0, 0);
+ break;
+ case ABS_HAT0X:
+ case ABS_HAT0Y: /* the d-pad */
+ input_set_abs_params(input_dev, t, -1, 1, 0, 0);
+ break;
+ }
+ }
ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
-
usb_fill_int_urb(xpad->irq_in, udev,
usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
xpad->idata, XPAD_PKT_LEN, xpad_irq_in,
@@ -255,59 +289,16 @@
xpad->irq_in->transfer_dma = xpad->idata_dma;
xpad->irq_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- xpad->udev = udev;
-
- usb_to_input_id(udev, &xpad->dev.id);
- xpad->dev.dev = &intf->dev;
- xpad->dev.private = xpad;
- xpad->dev.name = xpad_device[i].name;
- xpad->dev.phys = xpad->phys;
- xpad->dev.open = xpad_open;
- xpad->dev.close = xpad_close;
-
- usb_make_path(udev, path, 64);
- snprintf(xpad->phys, 64, "%s/input0", path);
-
- xpad->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-
- for (i = 0; xpad_btn[i] >= 0; i++)
- set_bit(xpad_btn[i], xpad->dev.keybit);
-
- for (i = 0; xpad_abs[i] >= 0; i++) {
-
- signed short t = xpad_abs[i];
-
- set_bit(t, xpad->dev.absbit);
-
- switch (t) {
- case ABS_X:
- case ABS_Y:
- case ABS_RX:
- case ABS_RY: /* the two sticks */
- xpad->dev.absmax[t] = 32767;
- xpad->dev.absmin[t] = -32768;
- xpad->dev.absflat[t] = 128;
- xpad->dev.absfuzz[t] = 16;
- break;
- case ABS_Z:
- case ABS_RZ: /* the triggers */
- xpad->dev.absmax[t] = 255;
- xpad->dev.absmin[t] = 0;
- break;
- case ABS_HAT0X:
- case ABS_HAT0Y: /* the d-pad */
- xpad->dev.absmax[t] = 1;
- xpad->dev.absmin[t] = -1;
- break;
- }
- }
-
- input_register_device(&xpad->dev);
-
- printk(KERN_INFO "input: %s on %s", xpad->dev.name, path);
+ input_register_device(xpad->dev);
usb_set_intfdata(intf, xpad);
return 0;
+
+fail2: usb_buffer_free(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
+fail1: input_free_device(input_dev);
+ kfree(xpad);
+ return -ENOMEM;
+
}
static void xpad_disconnect(struct usb_interface *intf)
@@ -317,7 +308,7 @@
usb_set_intfdata(intf, NULL);
if (xpad) {
usb_kill_urb(xpad->irq_in);
- input_unregister_device(&xpad->dev);
+ input_unregister_device(xpad->dev);
usb_free_urb(xpad->irq_in);
usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
kfree(xpad);
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
index 58a176e..f526aeb 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/usb/input/yealink.c
@@ -54,6 +54,7 @@
#include <linux/module.h>
#include <linux/rwsem.h>
#include <linux/usb.h>
+#include <linux/usb_input.h>
#include "map_to_7segment.h"
#include "yealink.h"
@@ -101,12 +102,12 @@
};
struct yealink_dev {
- struct input_dev idev; /* input device */
+ struct input_dev *idev; /* input device */
struct usb_device *udev; /* usb device */
/* irq input channel */
struct yld_ctl_packet *irq_data;
- dma_addr_t irq_dma;
+ dma_addr_t irq_dma;
struct urb *urb_irq;
/* control output channel */
@@ -237,7 +238,7 @@
*/
static void report_key(struct yealink_dev *yld, int key, struct pt_regs *regs)
{
- struct input_dev *idev = &yld->idev;
+ struct input_dev *idev = yld->idev;
input_regs(idev, regs);
if (yld->key_code >= 0) {
@@ -809,8 +810,12 @@
}
if (yld->urb_ctl)
usb_free_urb(yld->urb_ctl);
- if (yld->idev.dev)
- input_unregister_device(&yld->idev);
+ if (yld->idev) {
+ if (err)
+ input_free_device(yld->idev);
+ else
+ input_unregister_device(yld->idev);
+ }
if (yld->ctl_req)
usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)),
yld->ctl_req, yld->ctl_req_dma);
@@ -857,7 +862,7 @@
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct yealink_dev *yld;
- char path[64];
+ struct input_dev *input_dev;
int ret, pipe, i;
i = usb_match(udev);
@@ -866,17 +871,21 @@
interface = intf->cur_altsetting;
endpoint = &interface->endpoint[0].desc;
- if (!(endpoint->bEndpointAddress & 0x80))
+ if (!(endpoint->bEndpointAddress & USB_DIR_IN))
return -EIO;
- if ((endpoint->bmAttributes & 3) != 3)
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
return -EIO;
- if ((yld = kmalloc(sizeof(struct yealink_dev), GFP_KERNEL)) == NULL)
+ yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL);
+ if (!yld)
return -ENOMEM;
- memset(yld, 0, sizeof(*yld));
yld->udev = udev;
+ yld->idev = input_dev = input_allocate_device();
+ if (!input_dev)
+ return usb_cleanup(yld, -ENOMEM);
+
/* allocate usb buffers */
yld->irq_data = usb_buffer_alloc(udev, USB_PKT_LEN,
SLAB_ATOMIC, &yld->irq_dma);
@@ -935,42 +944,37 @@
yld->urb_ctl->dev = udev;
/* find out the physical bus location */
- if (usb_make_path(udev, path, sizeof(path)) > 0)
- snprintf(yld->phys, sizeof(yld->phys)-1, "%s/input0", path);
+ usb_make_path(udev, yld->phys, sizeof(yld->phys));
+ strlcat(yld->phys, "/input0", sizeof(yld->phys));
/* register settings for the input device */
- init_input_dev(&yld->idev);
- yld->idev.private = yld;
- yld->idev.id.bustype = BUS_USB;
- yld->idev.id.vendor = le16_to_cpu(udev->descriptor.idVendor);
- yld->idev.id.product = le16_to_cpu(udev->descriptor.idProduct);
- yld->idev.id.version = le16_to_cpu(udev->descriptor.bcdDevice);
- yld->idev.dev = &intf->dev;
- yld->idev.name = yld_device[i].name;
- yld->idev.phys = yld->phys;
- /* yld->idev.event = input_ev; TODO */
- yld->idev.open = input_open;
- yld->idev.close = input_close;
+ input_dev->name = yld_device[i].name;
+ input_dev->phys = yld->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+
+ input_dev->private = yld;
+ input_dev->open = input_open;
+ input_dev->close = input_close;
+ /* input_dev->event = input_ev; TODO */
/* register available key events */
- yld->idev.evbit[0] = BIT(EV_KEY);
+ input_dev->evbit[0] = BIT(EV_KEY);
for (i = 0; i < 256; i++) {
int k = map_p1k_to_key(i);
if (k >= 0) {
- set_bit(k & 0xff, yld->idev.keybit);
+ set_bit(k & 0xff, input_dev->keybit);
if (k >> 8)
- set_bit(k >> 8, yld->idev.keybit);
+ set_bit(k >> 8, input_dev->keybit);
}
}
- printk(KERN_INFO "input: %s on %s\n", yld->idev.name, path);
-
- input_register_device(&yld->idev);
+ input_register_device(yld->idev);
usb_set_intfdata(intf, yld);
/* clear visible elements */
- for (i=0; i<ARRAY_SIZE(lcdMap); i++)
+ for (i = 0; i < ARRAY_SIZE(lcdMap); i++)
setChar(yld, i, ' ');
/* display driver version on LCD line 3 */
diff --git a/drivers/usb/media/konicawc.c b/drivers/usb/media/konicawc.c
index 20ac9e1..9fe2c27 100644
--- a/drivers/usb/media/konicawc.c
+++ b/drivers/usb/media/konicawc.c
@@ -119,7 +119,7 @@
int yplanesz; /* Number of bytes in the Y plane */
unsigned int buttonsts:1;
#ifdef CONFIG_INPUT
- struct input_dev input;
+ struct input_dev *input;
char input_physname[64];
#endif
};
@@ -218,6 +218,57 @@
konicawc_camera_on(uvd);
}
+#ifdef CONFIG_INPUT
+
+static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev)
+{
+ struct input_dev *input_dev;
+
+ usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));
+ strncat(cam->input_physname, "/input0", sizeof(cam->input_physname));
+
+ cam->input = input_dev = input_allocate_device();
+ if (!input_dev) {
+ warn("Not enough memory for camera's input device\n");
+ return;
+ }
+
+ input_dev->name = "Konicawc snapshot button";
+ input_dev->phys = cam->input_physname;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->cdev.dev = &dev->dev;
+
+ input_dev->evbit[0] = BIT(EV_KEY);
+ input_dev->keybit[LONG(BTN_0)] = BIT(BTN_0);
+
+ input_dev->private = cam;
+
+ input_register_device(cam->input);
+}
+
+static void konicawc_unregister_input(struct konicawc *cam)
+{
+ if (cam->input) {
+ input_unregister_device(cam->input);
+ cam->input = NULL;
+ }
+}
+
+static void konicawc_report_buttonstat(struct konicawc *cam)
+{
+ if (cam->input) {
+ input_report_key(cam->input, BTN_0, cam->buttonsts);
+ input_sync(cam->input);
+ }
+}
+
+#else
+
+static inline void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) { }
+static inline void konicawc_unregister_input(struct konicawc *cam) { }
+static inline void konicawc_report_buttonstat(struct konicawc *cam) { }
+
+#endif /* CONFIG_INPUT */
static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct urb *stsurb)
{
@@ -273,10 +324,7 @@
if(button != cam->buttonsts) {
DEBUG(2, "button: %sclicked", button ? "" : "un");
cam->buttonsts = button;
-#ifdef CONFIG_INPUT
- input_report_key(&cam->input, BTN_0, cam->buttonsts);
- input_sync(&cam->input);
-#endif
+ konicawc_report_buttonstat(cam);
}
if(sts == 0x01) { /* drop frame */
@@ -645,9 +693,9 @@
RingQueue_Flush(&uvd->dp);
cam->lastframe = -2;
if(uvd->curframe != -1) {
- uvd->frame[uvd->curframe].curline = 0;
- uvd->frame[uvd->curframe].seqRead_Length = 0;
- uvd->frame[uvd->curframe].seqRead_Index = 0;
+ uvd->frame[uvd->curframe].curline = 0;
+ uvd->frame[uvd->curframe].seqRead_Length = 0;
+ uvd->frame[uvd->curframe].seqRead_Index = 0;
}
konicawc_start_data(uvd);
@@ -718,7 +766,6 @@
DEBUG(1, "setting initial values");
}
-
static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id *devid)
{
struct usb_device *dev = interface_to_usbdev(intf);
@@ -839,21 +886,8 @@
err("usbvideo_RegisterVideoDevice() failed.");
uvd = NULL;
}
-#ifdef CONFIG_INPUT
- /* Register input device for button */
- memset(&cam->input, 0, sizeof(struct input_dev));
- cam->input.name = "Konicawc snapshot button";
- cam->input.private = cam;
- cam->input.evbit[0] = BIT(EV_KEY);
- cam->input.keybit[LONG(BTN_0)] = BIT(BTN_0);
- usb_to_input_id(dev, &cam->input.id);
- input_register_device(&cam->input);
-
- usb_make_path(dev, cam->input_physname, 56);
- strcat(cam->input_physname, "/input0");
- cam->input.phys = cam->input_physname;
- info("konicawc: %s on %s\n", cam->input.name, cam->input.phys);
-#endif
+
+ konicawc_register_input(cam, dev);
}
if (uvd) {
@@ -869,10 +903,9 @@
int i;
struct konicawc *cam = (struct konicawc *)uvd->user_data;
-#ifdef CONFIG_INPUT
- input_unregister_device(&cam->input);
-#endif
- for (i=0; i < USBVIDEO_NUMSBUF; i++) {
+ konicawc_unregister_input(cam);
+
+ for (i = 0; i < USBVIDEO_NUMSBUF; i++) {
usb_free_urb(cam->sts_urb[i]);
cam->sts_urb[i] = NULL;
}
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 2c9402d..89401a5 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -5,7 +5,7 @@
* Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu>
*
* Initial work by:
- * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
+ * Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
*
* Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
*
@@ -46,7 +46,7 @@
struct usb_onetouch {
char name[128];
char phys[64];
- struct input_dev dev; /* input device interface */
+ struct input_dev *dev; /* input device interface */
struct usb_device *udev; /* usb device */
struct urb *irq; /* urb for interrupt in report */
@@ -58,7 +58,7 @@
{
struct usb_onetouch *onetouch = urb->context;
signed char *data = onetouch->data;
- struct input_dev *dev = &onetouch->dev;
+ struct input_dev *dev = onetouch->dev;
int status;
switch (urb->status) {
@@ -74,11 +74,9 @@
}
input_regs(dev, regs);
-
- input_report_key(&onetouch->dev, ONETOUCH_BUTTON,
- data[0] & 0x02);
-
+ input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02);
input_sync(dev);
+
resubmit:
status = usb_submit_urb (urb, SLAB_ATOMIC);
if (status)
@@ -113,8 +111,8 @@
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_onetouch *onetouch;
+ struct input_dev *input_dev;
int pipe, maxp;
- char path[64];
interface = ss->pusb_intf->cur_altsetting;
@@ -122,62 +120,62 @@
return -ENODEV;
endpoint = &interface->endpoint[2].desc;
- if(!(endpoint->bEndpointAddress & USB_DIR_IN))
+ if (!(endpoint->bEndpointAddress & USB_DIR_IN))
return -ENODEV;
- if((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
!= USB_ENDPOINT_XFER_INT)
return -ENODEV;
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
- if (!(onetouch = kcalloc(1, sizeof(struct usb_onetouch), GFP_KERNEL)))
- return -ENOMEM;
+ onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!onetouch || !input_dev)
+ goto fail1;
onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN,
SLAB_ATOMIC, &onetouch->data_dma);
- if (!onetouch->data){
- kfree(onetouch);
- return -ENOMEM;
- }
+ if (!onetouch->data)
+ goto fail1;
onetouch->irq = usb_alloc_urb(0, GFP_KERNEL);
- if (!onetouch->irq){
- kfree(onetouch);
- usb_buffer_free(udev, ONETOUCH_PKT_LEN,
- onetouch->data, onetouch->data_dma);
- return -ENODEV;
- }
-
+ if (!onetouch->irq)
+ goto fail2;
onetouch->udev = udev;
-
- set_bit(EV_KEY, onetouch->dev.evbit);
- set_bit(ONETOUCH_BUTTON, onetouch->dev.keybit);
- clear_bit(0, onetouch->dev.keybit);
-
- onetouch->dev.private = onetouch;
- onetouch->dev.open = usb_onetouch_open;
- onetouch->dev.close = usb_onetouch_close;
-
- usb_make_path(udev, path, sizeof(path));
- sprintf(onetouch->phys, "%s/input0", path);
-
- onetouch->dev.name = onetouch->name;
- onetouch->dev.phys = onetouch->phys;
-
- usb_to_input_id(udev, &onetouch->dev.id);
-
- onetouch->dev.dev = &udev->dev;
+ onetouch->dev = input_dev;
if (udev->manufacturer)
- strcat(onetouch->name, udev->manufacturer);
- if (udev->product)
- sprintf(onetouch->name, "%s %s", onetouch->name,
- udev->product);
+ strlcpy(onetouch->name, udev->manufacturer,
+ sizeof(onetouch->name));
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(onetouch->name, " ", sizeof(onetouch->name));
+ strlcat(onetouch->name, udev->product, sizeof(onetouch->name));
+ }
+
if (!strlen(onetouch->name))
- sprintf(onetouch->name, "Maxtor Onetouch %04x:%04x",
- onetouch->dev.id.vendor, onetouch->dev.id.product);
+ snprintf(onetouch->name, sizeof(onetouch->name),
+ "Maxtor Onetouch %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys));
+ strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys));
+
+ input_dev->name = onetouch->name;
+ input_dev->phys = onetouch->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &udev->dev;
+
+ set_bit(EV_KEY, input_dev->evbit);
+ set_bit(ONETOUCH_BUTTON, input_dev->keybit);
+ clear_bit(0, input_dev->keybit);
+
+ input_dev->private = onetouch;
+ input_dev->open = usb_onetouch_open;
+ input_dev->close = usb_onetouch_close;
usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data,
(maxp > 8 ? 8 : maxp),
@@ -188,10 +186,15 @@
ss->extra_destructor = onetouch_release_input;
ss->extra = onetouch;
- input_register_device(&onetouch->dev);
- printk(KERN_INFO "usb-input: %s on %s\n", onetouch->dev.name, path);
+ input_register_device(onetouch->dev);
return 0;
+
+ fail2: usb_buffer_free(udev, ONETOUCH_PKT_LEN,
+ onetouch->data, onetouch->data_dma);
+ fail1: kfree(onetouch);
+ input_free_device(input_dev);
+ return -ENOMEM;
}
void onetouch_release_input(void *onetouch_)
@@ -200,11 +203,9 @@
if (onetouch) {
usb_kill_urb(onetouch->irq);
- input_unregister_device(&onetouch->dev);
+ input_unregister_device(onetouch->dev);
usb_free_urb(onetouch->irq);
usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN,
onetouch->data, onetouch->data_dma);
- printk(KERN_INFO "usb-input: deregistering %s\n",
- onetouch->dev.name);
}
}
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index 321dbe9..cde6fd8 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -22,6 +22,7 @@
#include <linux/ioport.h>
#include <linux/list.h>
+#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/clock.h>
diff --git a/drivers/video/backlight/corgi_bl.c b/drivers/video/backlight/corgi_bl.c
index 3c72c62..1991fdb 100644
--- a/drivers/video/backlight/corgi_bl.c
+++ b/drivers/video/backlight/corgi_bl.c
@@ -73,17 +73,15 @@
}
#ifdef CONFIG_PM
-static int corgibl_suspend(struct device *dev, pm_message_t state, u32 level)
+static int corgibl_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN)
- corgibl_blank(FB_BLANK_POWERDOWN);
+ corgibl_blank(FB_BLANK_POWERDOWN);
return 0;
}
-static int corgibl_resume(struct device *dev, u32 level)
+static int corgibl_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON)
- corgibl_blank(FB_BLANK_UNBLANK);
+ corgibl_blank(FB_BLANK_UNBLANK);
return 0;
}
#else
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index eb83a78..7e73169 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -110,7 +110,7 @@
config FONTS
bool "Select compiled-in fonts"
- depends on FRAMEBUFFER_CONSOLE
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
help
Say Y here if you would like to use fonts other than the default
your frame buffer console usually use.
@@ -123,7 +123,7 @@
config FONT_8x8
bool "VGA 8x8 font" if FONTS
- depends on FRAMEBUFFER_CONSOLE
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
default y if !SPARC32 && !SPARC64 && !FONTS
help
This is the "high resolution" font for the VGA frame buffer (the one
@@ -137,7 +137,7 @@
config FONT_8x16
bool "VGA 8x16 font" if FONTS
- depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || USB_SISUSBVGA_CON
+ depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || STI_CONSOLE || USB_SISUSBVGA_CON
default y if !SPARC32 && !SPARC64 && !FONTS
help
This is the "high resolution" font for the VGA frame buffer (the one
@@ -147,7 +147,7 @@
config FONT_6x11
bool "Mac console 6x11 font (not supported by all drivers)" if FONTS
- depends on FRAMEBUFFER_CONSOLE
+ depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
default y if !SPARC32 && !SPARC64 && !FONTS && MAC
help
Small console font with Macintosh-style high-half glyphs. Some Mac
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index d940f60..a7bcd17 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -511,12 +511,12 @@
struct sti_cooked_font *cooked_font;
if (!fbfont_name || !strlen(fbfont_name))
- return NULL;
+ return NULL;
fbfont = find_font(fbfont_name);
if (!fbfont)
- fbfont = get_default_font(1024,768);
+ fbfont = get_default_font(1024,768);
if (!fbfont)
- return NULL;
+ return NULL;
DPRINTK((KERN_DEBUG "selected %dx%d fb-font %s\n",
fbfont->width, fbfont->height, fbfont->name));
@@ -527,7 +527,7 @@
nf = kmalloc(size, GFP_KERNEL);
if (!nf)
- return NULL;
+ return NULL;
memset(nf, 0, size);
nf->first_char = 0;
@@ -546,8 +546,8 @@
cooked_font = kmalloc(sizeof(*cooked_font), GFP_KERNEL);
if (!cooked_font) {
- kfree(nf);
- return NULL;
+ kfree(nf);
+ return NULL;
}
cooked_font->raw = nf;
@@ -595,7 +595,7 @@
static void __init
sti_dump_rom(struct sti_rom *rom)
{
- printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n",
+ printk(KERN_INFO " id %04x-%04x, conforms to spec rev. %d.%02x\n",
rom->graphics_id[0],
rom->graphics_id[1],
rom->revno[0] >> 4,
@@ -651,15 +651,16 @@
struct sti_cooked_font *font;
int i = 0;
- for(font = rom->font_start; font; font = font->next_font, i++) {
- if((font->raw->width == width) && (font->raw->height == height))
+ for (font = rom->font_start; font; font = font->next_font, i++) {
+ if ((font->raw->width == width) &&
+ (font->raw->height == height))
return i;
}
return 0;
}
-#define BMODE_RELOCATE(offset) offset = (offset) / 4;
-#define BMODE_LAST_ADDR_OFFS 0x50
+#define BMODE_RELOCATE(offset) offset = (offset) / 4;
+#define BMODE_LAST_ADDR_OFFS 0x50
static void * __init
sti_bmode_font_raw(struct sti_cooked_font *f)
@@ -700,35 +701,35 @@
{
struct sti_rom *raw;
u32 size;
- struct sti_rom_font *raw_font, *font_start;
-
+ struct sti_rom_font *raw_font, *font_start;
+
sti_bmode_rom_copy(address + BMODE_LAST_ADDR_OFFS, sizeof(size), &size);
-
- size = (size+3) / 4;
+
+ size = (size+3) / 4;
raw = kmalloc(size, GFP_KERNEL);
if (raw) {
- sti_bmode_rom_copy(address, size, raw);
- memmove (&raw->res004, &raw->type[0], 0x3c);
- raw->type[3] = raw->res004;
+ sti_bmode_rom_copy(address, size, raw);
+ memmove (&raw->res004, &raw->type[0], 0x3c);
+ raw->type[3] = raw->res004;
- BMODE_RELOCATE (raw->region_list);
- BMODE_RELOCATE (raw->font_start);
+ BMODE_RELOCATE (raw->region_list);
+ BMODE_RELOCATE (raw->font_start);
- BMODE_RELOCATE (raw->init_graph);
- BMODE_RELOCATE (raw->state_mgmt);
- BMODE_RELOCATE (raw->font_unpmv);
- BMODE_RELOCATE (raw->block_move);
- BMODE_RELOCATE (raw->inq_conf);
+ BMODE_RELOCATE (raw->init_graph);
+ BMODE_RELOCATE (raw->state_mgmt);
+ BMODE_RELOCATE (raw->font_unpmv);
+ BMODE_RELOCATE (raw->block_move);
+ BMODE_RELOCATE (raw->inq_conf);
- raw_font = ((void *)raw) + raw->font_start;
- font_start = raw_font;
+ raw_font = ((void *)raw) + raw->font_start;
+ font_start = raw_font;
- while (raw_font->next_font) {
- BMODE_RELOCATE (raw_font->next_font);
- raw_font = ((void *)font_start) + raw_font->next_font;
- }
+ while (raw_font->next_font) {
+ BMODE_RELOCATE (raw_font->next_font);
+ raw_font = ((void *)font_start) + raw_font->next_font;
+ }
}
- return raw;
+ return raw;
}
struct sti_rom * __init
@@ -736,15 +737,15 @@
{
struct sti_rom *raw;
unsigned long size;
-
+
/* read the ROM size directly from the struct in ROM */
size = gsc_readl(address + offsetof(struct sti_rom,last_addr));
raw = kmalloc(size, GFP_KERNEL);
- if(raw)
- sti_rom_copy(address, size, raw);
+ if (raw)
+ sti_rom_copy(address, size, raw);
- return raw;
+ return raw;
}
int __init
@@ -757,14 +758,14 @@
if (!cooked)
goto out_err;
- if (wordmode)
- raw = sti_get_wmode_rom (address);
- else
- raw = sti_get_bmode_rom (address);
+ if (wordmode)
+ raw = sti_get_wmode_rom (address);
+ else
+ raw = sti_get_bmode_rom (address);
- if (!raw)
- goto out_err;
-
+ if (!raw)
+ goto out_err;
+
if (!sti_cook_fonts(cooked, raw)) {
printk(KERN_ERR "No font found for STI at %08lx\n", address);
goto out_err;
@@ -787,7 +788,7 @@
sti->font_width = sti->font->raw->width;
sti->font_height = sti->font->raw->height;
if (!wordmode)
- sti->font->raw = sti_bmode_font_raw(sti->font);
+ sti->font->raw = sti_bmode_font_raw(sti->font);
sti->sti_mem_request = raw->sti_mem_req;
sti->graphics_id[0] = raw->graphics_id[0];
@@ -811,16 +812,16 @@
u32 sig;
if (num_sti_roms >= MAX_STI_ROMS) {
- printk(KERN_WARNING "maximum number of STI ROMS reached !\n");
- return NULL;
+ printk(KERN_WARNING "maximum number of STI ROMS reached !\n");
+ return NULL;
}
sti = kmalloc(sizeof(*sti), GFP_KERNEL);
if (!sti) {
- printk(KERN_ERR "Not enough memory !\n");
- return NULL;
+ printk(KERN_ERR "Not enough memory !\n");
+ return NULL;
}
-
+
memset(sti, 0, sizeof(*sti));
spin_lock_init(&sti->lock);
@@ -932,28 +933,21 @@
*/
static int __init sticore_pa_init(struct parisc_device *dev)
{
- unsigned long rom = 0;
char pa_path[21];
struct sti_struct *sti = NULL;
-
- if(dev->num_addrs) {
- rom = dev->addr[0];
- }
- if (!rom) {
- rom = dev->hpa;
- DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa));
- sti = sti_try_rom_generic(rom, dev->hpa, NULL);
- rom = PAGE0->proc_sti;
- }
- if (!sti) {
- DPRINTK((KERN_DEBUG "Trying STI ROM at %08lx, hpa at %08lx\n", rom, dev->hpa));
- sti = sti_try_rom_generic(rom, dev->hpa, NULL);
- }
+ int hpa = dev->hpa.start;
+
+ if (dev->num_addrs && dev->addr[0])
+ sti = sti_try_rom_generic(dev->addr[0], hpa, NULL);
+ if (!sti)
+ sti = sti_try_rom_generic(hpa, hpa, NULL);
+ if (!sti)
+ sti = sti_try_rom_generic(PAGE0->proc_sti, hpa, NULL);
if (!sti)
return 1;
-
+
print_pa_hwpath(dev, pa_path);
- sticore_check_for_default_sti (sti, pa_path);
+ sticore_check_for_default_sti(sti, pa_path);
return 0;
}
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 70be700..9073be4 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1031,7 +1031,7 @@
break;
fb_info->node = i;
- fb_info->class_device = class_device_create(fb_class, MKDEV(FB_MAJOR, i),
+ fb_info->class_device = class_device_create(fb_class, NULL, MKDEV(FB_MAJOR, i),
fb_info->device, "fb%d", i);
if (IS_ERR(fb_info->class_device)) {
/* Not fatal */
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 1d54d3d6..0b9301fa 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -424,23 +424,21 @@
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int imxfb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int imxfb_suspend(struct device *dev, pm_message_t state)
{
struct imxfb_info *fbi = dev_get_drvdata(dev);
pr_debug("%s\n",__FUNCTION__);
- if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
- imxfb_disable_controller(fbi);
+ imxfb_disable_controller(fbi);
return 0;
}
-static int imxfb_resume(struct device *dev, u32 level)
+static int imxfb_resume(struct device *dev)
{
struct imxfb_info *fbi = dev_get_drvdata(dev);
pr_debug("%s\n",__FUNCTION__);
- if (level == RESUME_ENABLE)
- imxfb_enable_controller(fbi);
+ imxfb_enable_controller(fbi);
return 0;
}
#else
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 194eed0..6206da9 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -981,21 +981,19 @@
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int pxafb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int pxafb_suspend(struct device *dev, pm_message_t state)
{
struct pxafb_info *fbi = dev_get_drvdata(dev);
- if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
- set_ctrlr_state(fbi, C_DISABLE_PM);
+ set_ctrlr_state(fbi, C_DISABLE_PM);
return 0;
}
-static int pxafb_resume(struct device *dev, u32 level)
+static int pxafb_resume(struct device *dev)
{
struct pxafb_info *fbi = dev_get_drvdata(dev);
- if (level == RESUME_ENABLE)
- set_ctrlr_state(fbi, C_ENABLE_PM);
+ set_ctrlr_state(fbi, C_ENABLE_PM);
return 0;
}
#else
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index fa98d91..cb2f7a1 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -655,7 +655,7 @@
}
#ifdef CONFIG_PM
-static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int s1d13xxxfb_suspend(struct device *dev, pm_message_t state)
{
struct fb_info *info = dev_get_drvdata(dev);
struct s1d13xxxfb_par *s1dfb = info->par;
@@ -702,15 +702,12 @@
return 0;
}
-static int s1d13xxxfb_resume(struct device *dev, u32 level)
+static int s1d13xxxfb_resume(struct device *dev)
{
struct fb_info *info = dev_get_drvdata(dev);
struct s1d13xxxfb_par *s1dfb = info->par;
struct s1d13xxxfb_pdata *pdata = NULL;
- if (level != RESUME_ENABLE)
- return 0;
-
/* awaken the chip */
s1d13xxxfb_writereg(s1dfb, S1DREG_PS_CNF, 0x10);
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 5ab79af..3862d3c 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -847,37 +847,32 @@
/* suspend and resume support for the lcd controller */
-static int s3c2410fb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int s3c2410fb_suspend(struct device *dev, pm_message_t state)
{
struct fb_info *fbinfo = dev_get_drvdata(dev);
struct s3c2410fb_info *info = fbinfo->par;
- if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) {
- s3c2410fb_stop_lcd();
+ s3c2410fb_stop_lcd();
- /* sleep before disabling the clock, we need to ensure
- * the LCD DMA engine is not going to get back on the bus
- * before the clock goes off again (bjd) */
+ /* sleep before disabling the clock, we need to ensure
+ * the LCD DMA engine is not going to get back on the bus
+ * before the clock goes off again (bjd) */
- msleep(1);
- clk_disable(info->clk);
- }
+ msleep(1);
+ clk_disable(info->clk);
return 0;
}
-static int s3c2410fb_resume(struct device *dev, u32 level)
+static int s3c2410fb_resume(struct device *dev)
{
struct fb_info *fbinfo = dev_get_drvdata(dev);
struct s3c2410fb_info *info = fbinfo->par;
- if (level == RESUME_ENABLE) {
- clk_enable(info->clk);
- msleep(1);
+ clk_enable(info->clk);
+ msleep(1);
- s3c2410fb_init_registers(info);
-
- }
+ s3c2410fb_init_registers(info);
return 0;
}
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index 8000890..78e5f19 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -1309,21 +1309,19 @@
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int sa1100fb_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sa1100fb_suspend(struct device *dev, pm_message_t state)
{
struct sa1100fb_info *fbi = dev_get_drvdata(dev);
- if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
- set_ctrlr_state(fbi, C_DISABLE_PM);
+ set_ctrlr_state(fbi, C_DISABLE_PM);
return 0;
}
-static int sa1100fb_resume(struct device *dev, u32 level)
+static int sa1100fb_resume(struct device *dev)
{
struct sa1100fb_info *fbi = dev_get_drvdata(dev);
- if (level == RESUME_ENABLE)
- set_ctrlr_state(fbi, C_ENABLE_PM);
+ set_ctrlr_state(fbi, C_ENABLE_PM);
return 0;
}
#else
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 0030c07..752bf88 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -438,36 +438,34 @@
}
}
-static int w100fb_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int w100fb_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- struct fb_info *info = dev_get_drvdata(dev);
- struct w100fb_par *par=info->par;
- struct w100_tg_info *tg = par->mach->tg;
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct w100fb_par *par=info->par;
+ struct w100_tg_info *tg = par->mach->tg;
- w100fb_save_vidmem(par);
- if(tg && tg->suspend)
- tg->suspend(par);
- w100_suspend(W100_SUSPEND_ALL);
- par->blanked = 1;
- }
+ w100fb_save_vidmem(par);
+ if(tg && tg->suspend)
+ tg->suspend(par);
+ w100_suspend(W100_SUSPEND_ALL);
+ par->blanked = 1;
+
return 0;
}
-static int w100fb_resume(struct device *dev, uint32_t level)
+static int w100fb_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- struct fb_info *info = dev_get_drvdata(dev);
- struct w100fb_par *par=info->par;
- struct w100_tg_info *tg = par->mach->tg;
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct w100fb_par *par=info->par;
+ struct w100_tg_info *tg = par->mach->tg;
- w100_hw_init(par);
- w100fb_activate_var(par);
- w100fb_restore_vidmem(par);
- if(tg && tg->resume)
- tg->resume(par);
- par->blanked = 0;
- }
+ w100_hw_init(par);
+ w100fb_activate_var(par);
+ w100fb_restore_vidmem(par);
+ if(tg && tg->resume)
+ tg->resume(par);
+ par->blanked = 0;
+
return 0;
}
#else
diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c
index 3d1cce3..6a3df88 100644
--- a/fs/coda/psdev.c
+++ b/fs/coda/psdev.c
@@ -370,8 +370,8 @@
}
devfs_mk_dir ("coda");
for (i = 0; i < MAX_CODADEVS; i++) {
- class_device_create(coda_psdev_class, MKDEV(CODA_PSDEV_MAJOR,i),
- NULL, "cfs%d", i);
+ class_device_create(coda_psdev_class, NULL,
+ MKDEV(CODA_PSDEV_MAJOR,i), NULL, "cfs%d", i);
err = devfs_mk_cdev(MKDEV(CODA_PSDEV_MAJOR, i),
S_IFCHR|S_IRUSR|S_IWUSR, "coda/%d", i);
if (err)
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 9e24ceb..097383c 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -510,19 +510,11 @@
kfree(rsv);
}
-static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs)
+static inline void ext3_show_quota_options(struct seq_file *seq, struct super_block *sb)
{
- struct super_block *sb = vfs->mnt_sb;
+#if defined(CONFIG_QUOTA)
struct ext3_sb_info *sbi = EXT3_SB(sb);
- if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
- seq_puts(seq, ",data=journal");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
- seq_puts(seq, ",data=ordered");
- else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
- seq_puts(seq, ",data=writeback");
-
-#if defined(CONFIG_QUOTA)
if (sbi->s_jquota_fmt)
seq_printf(seq, ",jqfmt=%s",
(sbi->s_jquota_fmt == QFMT_VFS_OLD) ? "vfsold": "vfsv0");
@@ -539,6 +531,20 @@
if (sbi->s_mount_opt & EXT3_MOUNT_GRPQUOTA)
seq_puts(seq, ",grpquota");
#endif
+}
+
+static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs)
+{
+ struct super_block *sb = vfs->mnt_sb;
+
+ if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA)
+ seq_puts(seq, ",data=journal");
+ else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA)
+ seq_puts(seq, ",data=ordered");
+ else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)
+ seq_puts(seq, ",data=writeback");
+
+ ext3_show_quota_options(seq, sb);
return 0;
}
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index eadf319..68000a5 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -74,7 +74,7 @@
static void dbAllocBits(struct bmap * bmp, struct dmap * dp, s64 blkno,
int nblocks);
static void dbSplit(dmtree_t * tp, int leafno, int splitsz, int newval);
-static void dbBackSplit(dmtree_t * tp, int leafno);
+static int dbBackSplit(dmtree_t * tp, int leafno);
static int dbJoin(dmtree_t * tp, int leafno, int newval);
static void dbAdjTree(dmtree_t * tp, int leafno, int newval);
static int dbAdjCtl(struct bmap * bmp, s64 blkno, int newval, int alloc,
@@ -305,7 +305,6 @@
filemap_fdatawrite(ipbmap->i_mapping);
filemap_fdatawait(ipbmap->i_mapping);
- ipbmap->i_state |= I_DIRTY;
diWriteSpecial(ipbmap, 0);
return (0);
@@ -2467,7 +2466,9 @@
* that it is at the front of a binary buddy system.
*/
if (oldval == NOFREE) {
- dbBackSplit((dmtree_t *) dcp, leafno);
+ rc = dbBackSplit((dmtree_t *) dcp, leafno);
+ if (rc)
+ return rc;
oldval = dcp->stree[ti];
}
dbSplit((dmtree_t *) dcp, leafno, dcp->budmin, newval);
@@ -2627,7 +2628,7 @@
*
* serialization: IREAD_LOCK(ipbmap) or IWRITE_LOCK(ipbmap) held on entry/exit;
*/
-static void dbBackSplit(dmtree_t * tp, int leafno)
+static int dbBackSplit(dmtree_t * tp, int leafno)
{
int budsz, bud, w, bsz, size;
int cursz;
@@ -2662,7 +2663,10 @@
*/
for (w = leafno, bsz = budsz;; bsz <<= 1,
w = (w < bud) ? w : bud) {
- assert(bsz < le32_to_cpu(tp->dmt_nleafs));
+ if (bsz >= le32_to_cpu(tp->dmt_nleafs)) {
+ jfs_err("JFS: block map error in dbBackSplit");
+ return -EIO;
+ }
/* determine the buddy.
*/
@@ -2681,7 +2685,11 @@
}
}
- assert(leaf[leafno] == size);
+ if (leaf[leafno] != size) {
+ jfs_err("JFS: wrong leaf value in dbBackSplit");
+ return -EIO;
+ }
+ return 0;
}
diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c
index 4021d46..28201b1 100644
--- a/fs/jfs/jfs_imap.c
+++ b/fs/jfs/jfs_imap.c
@@ -57,6 +57,12 @@
#include "jfs_debug.h"
/*
+ * __mark_inode_dirty expects inodes to be hashed. Since we don't want
+ * special inodes in the fileset inode space, we hash them to a dummy head
+ */
+static HLIST_HEAD(aggregate_hash);
+
+/*
* imap locks
*/
/* iag free list lock */
@@ -491,6 +497,8 @@
/* release the page */
release_metapage(mp);
+ hlist_add_head(&ip->i_hash, &aggregate_hash);
+
return (ip);
}
@@ -514,8 +522,6 @@
ino_t inum = ip->i_ino;
struct metapage *mp;
- ip->i_state &= ~I_DIRTY;
-
if (secondary)
address = addressPXD(&sbi->ait2) >> sbi->l2nbperpage;
else
diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c
index eeb37d7..26091a5 100644
--- a/fs/jfs/jfs_metapage.c
+++ b/fs/jfs/jfs_metapage.c
@@ -395,6 +395,12 @@
if (mp->nohomeok && !test_bit(META_forcewrite, &mp->flag)) {
redirty = 1;
+ /*
+ * Make sure this page isn't blocked indefinitely.
+ * If the journal isn't undergoing I/O, push it
+ */
+ if (mp->log && !(mp->log->cflag & logGC_PAGEOUT))
+ jfs_flush_journal(mp->log, 0);
continue;
}
diff --git a/fs/jfs/jfs_txnmgr.c b/fs/jfs/jfs_txnmgr.c
index 9b71ed2..b660c93 100644
--- a/fs/jfs/jfs_txnmgr.c
+++ b/fs/jfs/jfs_txnmgr.c
@@ -2396,7 +2396,6 @@
*/
if (tblk->xflag & COMMIT_CREATE) {
diUpdatePMap(ipimap, tblk->ino, FALSE, tblk);
- ipimap->i_state |= I_DIRTY;
/* update persistent block allocation map
* for the allocation of inode extent;
*/
@@ -2407,7 +2406,6 @@
} else if (tblk->xflag & COMMIT_DELETE) {
ip = tblk->u.ip;
diUpdatePMap(ipimap, ip->i_ino, TRUE, tblk);
- ipimap->i_state |= I_DIRTY;
iput(ip);
}
}
diff --git a/fs/jfs/jfs_xtree.c b/fs/jfs/jfs_xtree.c
index a7fe2f2..e72f4eb 100644
--- a/fs/jfs/jfs_xtree.c
+++ b/fs/jfs/jfs_xtree.c
@@ -3516,16 +3516,10 @@
/* process entries backward from last index */
index = le16_to_cpu(p->header.nextindex) - 1;
- if (p->header.flag & BT_INTERNAL)
- goto getChild;
- /*
- * leaf page
- */
-
- /* Since this is the rightmost leaf, and we may have already freed
- * a page that was formerly to the right, let's make sure that the
- * next pointer is zero.
+ /* Since this is the rightmost page at this level, and we may have
+ * already freed a page that was formerly to the right, let's make
+ * sure that the next pointer is zero.
*/
if (p->header.next) {
if (log)
@@ -3539,6 +3533,12 @@
p->header.next = 0;
}
+ if (p->header.flag & BT_INTERNAL)
+ goto getChild;
+
+ /*
+ * leaf page
+ */
freed = 0;
/* does region covered by leaf page precede Teof ? */
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 71bc34b9..4226af3 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -442,6 +442,7 @@
inode->i_nlink = 1;
inode->i_size = sb->s_bdev->bd_inode->i_size;
inode->i_mapping->a_ops = &jfs_metapage_aops;
+ insert_inode_hash(inode);
mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS);
sbi->direct_inode = inode;
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 1e84864..9c06c54 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -192,6 +192,7 @@
struct part_attribute {
struct attribute attr;
ssize_t (*show)(struct hd_struct *,char *);
+ ssize_t (*store)(struct hd_struct *,const char *, size_t);
};
static ssize_t
@@ -201,14 +202,33 @@
struct part_attribute * part_attr = container_of(attr,struct part_attribute,attr);
ssize_t ret = 0;
if (part_attr->show)
- ret = part_attr->show(p,page);
+ ret = part_attr->show(p, page);
+ return ret;
+}
+static ssize_t
+part_attr_store(struct kobject * kobj, struct attribute * attr,
+ const char *page, size_t count)
+{
+ struct hd_struct * p = container_of(kobj,struct hd_struct,kobj);
+ struct part_attribute * part_attr = container_of(attr,struct part_attribute,attr);
+ ssize_t ret = 0;
+
+ if (part_attr->store)
+ ret = part_attr->store(p, page, count);
return ret;
}
static struct sysfs_ops part_sysfs_ops = {
.show = part_attr_show,
+ .store = part_attr_store,
};
+static ssize_t part_uevent_store(struct hd_struct * p,
+ const char *page, size_t count)
+{
+ kobject_hotplug(&p->kobj, KOBJ_ADD);
+ return count;
+}
static ssize_t part_dev_read(struct hd_struct * p, char *page)
{
struct gendisk *disk = container_of(p->kobj.parent,struct gendisk,kobj);
@@ -229,6 +249,10 @@
p->reads, (unsigned long long)p->read_sectors,
p->writes, (unsigned long long)p->write_sectors);
}
+static struct part_attribute part_attr_uevent = {
+ .attr = {.name = "uevent", .mode = S_IWUSR },
+ .store = part_uevent_store
+};
static struct part_attribute part_attr_dev = {
.attr = {.name = "dev", .mode = S_IRUGO },
.show = part_dev_read
@@ -247,6 +271,7 @@
};
static struct attribute * default_attrs[] = {
+ &part_attr_uevent.attr,
&part_attr_dev.attr,
&part_attr_start.attr,
&part_attr_size.attr,
diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h
index 0e9b7e1..0022279 100644
--- a/include/asm-arm/arch-aaec2000/aaec2000.h
+++ b/include/asm-arm/arch-aaec2000/aaec2000.h
@@ -17,6 +17,16 @@
#error You must include hardware.h not this file
#endif /* __ASM_ARCH_HARDWARE_H */
+/* Chip selects */
+#define AAEC_CS0 0x00000000
+#define AAEC_CS1 0x10000000
+#define AAEC_CS2 0x20000000
+#define AAEC_CS3 0x30000000
+
+/* Flash */
+#define AAEC_FLASH_BASE AAEC_CS0
+#define AAEC_FLASH_SIZE SZ_64M
+
/* Interrupt controller */
#define IRQ_BASE __REG(0x80000500)
#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */
@@ -148,4 +158,50 @@
#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */
+/* GPIO Registers */
+#define AAEC_GPIO_PHYS 0x80000e00
+
+#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00)
+#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04)
+#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08)
+#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c)
+#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10)
+#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14)
+#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18)
+#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c)
+#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20)
+#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24)
+#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28)
+#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c)
+#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30)
+#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34)
+#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38)
+#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c)
+#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40)
+#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44)
+#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48)
+#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c)
+#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50)
+#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54)
+#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58)
+#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c)
+#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60)
+#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64)
+#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68)
+#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c)
+#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70)
+#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74)
+#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78)
+#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c)
+#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80)
+#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84)
+
+#define AAEC_GPIO_PINMUX_PE0CON (1 << 0)
+#define AAEC_GPIO_PINMUX_PD0CON (1 << 1)
+#define AAEC_GPIO_PINMUX_CODECON (1 << 2)
+#define AAEC_GPIO_PINMUX_UART3CON (1 << 3)
+
+/* LCD Controller */
+#define AAEC_CLCD_PHYS 0x80003000
+
#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/include/asm-arm/arch-aaec2000/aaed2000.h
new file mode 100644
index 0000000..bc76d2b
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/aaed2000.h
@@ -0,0 +1,40 @@
+/*
+ * linux/include/asm-arm/arch-aaec2000/aaed2000.h
+ *
+ * AAED-2000 specific bits definition
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAED2000_H
+#define __ASM_ARCH_AAED2000_H
+
+/* External GPIOs. */
+
+#define EXT_GPIO_PBASE AAEC_CS3
+#define EXT_GPIO_VBASE 0xf8100000
+#define EXT_GPIO_LENGTH 0x00001000
+
+#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
+#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
+
+#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x)))
+#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x)))
+
+#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE)
+
+#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */
+#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */
+#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */
+#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */
+#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */
+#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */
+#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */
+#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */
+
+
+#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h
index 4c37219e..153506f 100644
--- a/include/asm-arm/arch-aaec2000/hardware.h
+++ b/include/asm-arm/arch-aaec2000/hardware.h
@@ -11,7 +11,8 @@
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
-#include <linux/config.h>
+#include <asm/sizes.h>
+#include <asm/arch/aaec2000.h>
/* The kernel is loaded at physical address 0xf8000000.
* We map the IO space a bit after
diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h
index c58a8d1..8d67907 100644
--- a/include/asm-arm/arch-aaec2000/io.h
+++ b/include/asm-arm/arch-aaec2000/io.h
@@ -6,6 +6,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h
index f0113bc..89a3328 100644
--- a/include/asm-arm/arch-cl7500/io.h
+++ b/include/asm-arm/arch-cl7500/io.h
@@ -10,6 +10,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
index 1386871..f864c36 100644
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ b/include/asm-arm/arch-clps711x/hardware.h
@@ -235,4 +235,121 @@
#define CEIVA_PB0_BLK_BTN (1<<0)
#endif // #if defined (CONFIG_ARCH_CEIVA)
+#if defined (CONFIG_MACH_MP1000)
+/* NOR FLASH */
+#define MP1000_NIO_BASE 0xf9000000 /* virtual */
+#define MP1000_NIO_START CS0_PHYS_BASE /* physical */
+#define MP1000_NIO_SIZE 0x00400000
+
+/* DSP Interface */
+#define MP1000_DSP_BASE 0xfa000000 /* virtual */
+#define MP1000_DSP_START CS1_PHYS_BASE /* physical */
+#define MP1000_DSP_SIZE 0x00100000
+
+/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */
+#define MP1000_LIO_BASE 0xfb000000 /* virtual */
+#define MP1000_LIO_START CS2_PHYS_BASE /* physical */
+#define MP1000_LIO_SIZE 0x00100000
+
+/* NAND FLASH */
+#define MP1000_FIO_BASE 0xfc000000 /* virtual */
+#define MP1000_FIO_START CS3_PHYS_BASE /* physical */
+#define MP1000_FIO_SIZE 0x00800000
+
+/* Ethernet */
+#define MP1000_EIO_BASE 0xfd000000 /* virtual */
+#define MP1000_EIO_START CS4_PHYS_BASE /* physical */
+#define MP1000_EIO_SIZE 0x00100000
+
+#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */
+#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/
+#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */
+#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */
+
+/* IDE */
+#define MP1000_IDE_BASE 0xfe000000 /* virtual */
+#define MP1000_IDE_START CS5_PHYS_BASE /* physical */
+#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */
+
+#define IRQ_HARDDISK IRQ_EINT2
+
+/*
+ * IDE registers definition
+ */
+
+#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000)
+#define IDE_BASE_OFF (MP1000_IDE_BASE)
+
+#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0)
+#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2)
+#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4)
+#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6)
+#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8)
+#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa)
+#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc)
+#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe)
+#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc)
+
+#define IDE_IRQ IRQ_EINT2
+
+
+#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2))
+#define RTC_ALWAYS_BCD 0
+
+/*
+// Definitions of the bit fields in the HwPortA register for the
+// MP1000 board.
+*/
+#define HwPortAKeyboardRow1 0x00000001
+#define HwPortAKeyboardRow2 0x00000002
+#define HwPortAKeyboardRow3 0x00000004
+#define HwPortAKeyboardRow4 0x00000008
+#define HwPortAKeyboardRow5 0x00000010
+#define HwPortAKeyboardRow6 0x00000020
+#define HwPortALCDEnable 0x00000040
+#define HwPortAOffhook 0x00000080
+
+/*
+// Definitions of the bit fields in the HwPortB register for the
+// MP1000 board.
+*/
+#define HwPortBL3Mode 0x00000001
+#define HwPortBL3Clk 0x00000002
+#define HwPortBSClk 0x00000001
+#define HwPortBSData 0x00000002
+#define HwPortBL3Data 0x00000004
+#define HwPortBMute 0x00000008
+#define HwPortBQD0 0x00000010
+#define HwPortBQD1 0x00000020
+#define HwPortBQD2 0x00000040
+#define HwPortBQD3 0x00000080
+
+/*
+// Definitions of the bit fields in the HwPortD register for the
+// MP1000 board.
+*/
+#define HwPortDLED1 0x00000001
+#define HwPortDLED2 0x00000002
+#define HwPortDLED3 0x00000004
+#define HwPortDLED4 0x00000008
+#define HwPortDLED5 0x00000010
+#define HwPortDEECS 0x00000020
+#define HwPortBRTS 0x00000040
+#define HwPortBRI 0x00000080
+
+
+/*
+// Definitions of the bit fields in the HwPortE register for the
+// MP1000 board.
+*/
+
+#define HwPortECLE 0x00000001
+#define HwPortESepromDOut 0x00000001
+#define HwPortEALE 0x00000002
+#define HwPortESepromDIn 0x00000002
+#define HwPortENANDCS 0x00000004
+#define HwPortESepromCLK 0x00000004
+
+#endif // #if defined (CONFIG_MACH_MP1000)
+
#endif
diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h
index 14d7e8d..62613b0 100644
--- a/include/asm-arm/arch-clps711x/io.h
+++ b/include/asm-arm/arch-clps711x/io.h
@@ -20,6 +20,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) ((void __iomem *)(a))
diff --git a/include/asm-arm/arch-clps711x/mp1000-seprom.h b/include/asm-arm/arch-clps711x/mp1000-seprom.h
new file mode 100644
index 0000000..3e5566c
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/mp1000-seprom.h
@@ -0,0 +1,77 @@
+#ifndef MP1000_SEPROM_H
+#define MP1000_SEPROM_H
+
+/*
+ * mp1000-seprom.h
+ *
+ *
+ * This file contains the Serial EEPROM definitions for the MP1000 board
+ *
+ * Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#define COMMAND_ERASE (0x1C0)
+#define COMMAND_ERASE_ALL (0x120)
+#define COMMAND_WRITE_DISABLE (0x100)
+#define COMMAND_WRITE_ENABLE (0x130)
+#define COMMAND_READ (0x180)
+#define COMMAND_WRITE (0x140)
+#define COMMAND_WRITE_ALL (0x110)
+
+//
+// Serial EEPROM data format
+//
+
+#define PACKED __attribute__ ((packed))
+
+typedef struct _EEPROM {
+ union {
+ unsigned char eprom_byte_data[128];
+ unsigned short eprom_short_data[64];
+ struct {
+ unsigned char version PACKED; // EEPROM Version "1" for now
+ unsigned char box_id PACKED; // Box ID (Standalone, SOHO, embedded, etc)
+ unsigned char major_hw_version PACKED; // Major Hardware version (Hex)
+ unsigned char minor_hw_version PACKED; // Minor Hardware Version (Hex)
+ unsigned char mfg_id[3] PACKED; // Manufacturer ID (3 character Alphabetic)
+ unsigned char mfg_serial_number[10] PACKED; // Manufacturer Serial number
+ unsigned char mfg_date[3] PACKED; // Date of Mfg (Formatted YY:MM:DD)
+ unsigned char country PACKED; // Country of deployment
+ unsigned char mac_Address[6] PACKED; // MAC Address
+ unsigned char oem_string[20] PACKED; // OEM ID string
+ unsigned short feature_bits1 PACKED; // Feature Bits 1
+ unsigned short feature_bits2 PACKED; // Feature Bits 2
+ unsigned char filler[75] PACKED; // Unused/Undefined “0” initialized
+ unsigned short checksum PACKED; // byte accumulated short checksum
+ } eprom_struct;
+ } variant;
+} eeprom_struct;
+
+/* These settings must be mutually exclusive */
+#define FEATURE_BITS1_DRAMSIZE_16MEG 0x0001 /* 0 signifies 4 MEG system */
+#define FEATURE_BITS1_DRAMSIZE_8MEG 0x0002 /* 1 in bit 1 = 8MEG system */
+#define FEATURE_BITS1_DRAMSIZE_64MEG 0x0004 /* 1 in bit 2 = 64MEG system */
+
+#define FEATURE_BITS1_CPUIS90MEG 0x0010
+
+extern void seprom_init(void);
+extern eeprom_struct* get_seprom_ptr(void);
+extern unsigned char* get_eeprom_mac_address(void);
+
+#endif /* MP1000_SEPROM_H */
+
diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h
index 70576b1..776f9d3 100644
--- a/include/asm-arm/arch-ebsa285/io.h
+++ b/include/asm-arm/arch-ebsa285/io.h
@@ -14,6 +14,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffff
/*
diff --git a/include/asm-arm/arch-epxa10db/io.h b/include/asm-arm/arch-epxa10db/io.h
index 1f0afa2..9fe100c 100644
--- a/include/asm-arm/arch-epxa10db/io.h
+++ b/include/asm-arm/arch-epxa10db/io.h
@@ -20,6 +20,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffff
diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h
index 6881482..d3ccfd8 100644
--- a/include/asm-arm/arch-h720x/io.h
+++ b/include/asm-arm/arch-h720x/io.h
@@ -14,7 +14,7 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#define IO_SPACE_LIMIT 0xffffffff
diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h
index 28a4cca..b191cdd 100644
--- a/include/asm-arm/arch-imx/io.h
+++ b/include/asm-arm/arch-imx/io.h
@@ -20,6 +20,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) ((void __iomem *)(a))
diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h
index be2716e..6f0947b 100644
--- a/include/asm-arm/arch-integrator/hardware.h
+++ b/include/asm-arm/arch-integrator/hardware.h
@@ -33,15 +33,6 @@
#define IO_SIZE 0x0B000000 // How much?
#define IO_START INTEGRATOR_HDR_BASE // PA of IO
-/*
- * Similar to above, but for PCI addresses (memory, IO, Config and the
- * V3 chip itself). WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR 0xe8000000
-#define PCI_CONFIG_VADDR 0xec000000
-#define PCI_V3_VADDR 0xed000000
-#define PCI_IO_VADDR 0xee000000
-
#define PCIO_BASE PCI_IO_VADDR
#define PCIMEM_BASE PCI_MEMORY_VADDR
diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h
index fbea8be..31f2dea 100644
--- a/include/asm-arm/arch-integrator/io.h
+++ b/include/asm-arm/arch-integrator/io.h
@@ -22,6 +22,14 @@
#define IO_SPACE_LIMIT 0xffff
+/*
+ * WARNING: this has to mirror definitions in platform.h
+ */
+#define PCI_MEMORY_VADDR 0xe8000000
+#define PCI_CONFIG_VADDR 0xec000000
+#define PCI_V3_VADDR 0xed000000
+#define PCI_IO_VADDR 0xee000000
+
#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a)))
#define __mem_pci(a) (a)
#define __mem_isa(a) ((a) + PCI_MEMORY_VADDR)
diff --git a/include/asm-arm/arch-iop3xx/io.h b/include/asm-arm/arch-iop3xx/io.h
index 2761dfd..f39046a 100644
--- a/include/asm-arm/arch-iop3xx/io.h
+++ b/include/asm-arm/arch-iop3xx/io.h
@@ -11,6 +11,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
#define __io(p) ((void __iomem *)(p))
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
index 3241cd6..7fbcdf9 100644
--- a/include/asm-arm/arch-ixp2000/io.h
+++ b/include/asm-arm/arch-ixp2000/io.h
@@ -15,6 +15,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
#define __mem_pci(a) (a)
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
index 32aece0..def089d 100644
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
@@ -392,4 +392,47 @@
#define WDT_RESET_ENABLE 0x01000000
+/*
+ * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF
+ * units, but the registers that differ between the two don't overlap,
+ * so we can have one register list for both.
+ */
+#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
+#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000)
+#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004)
+#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008)
+#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c)
+#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010)
+#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014)
+#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018)
+#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024)
+#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028)
+#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c)
+#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040)
+#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044)
+#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058)
+#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060)
+#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064)
+#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068)
+#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080)
+#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084)
+#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088)
+#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c)
+#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090)
+#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094)
+#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098)
+#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c)
+#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0)
+#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4)
+#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8)
+#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000)
+#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400)
+
+
#endif /* _IXP2000_H_ */
diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h
index fc012a3..cab8ad0 100644
--- a/include/asm-arm/arch-l7200/io.h
+++ b/include/asm-arm/arch-l7200/io.h
@@ -10,7 +10,7 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
#define IO_SPACE_LIMIT 0xffffffff
diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h
index c13bdd9..bbcd433 100644
--- a/include/asm-arm/arch-lh7a40x/io.h
+++ b/include/asm-arm/arch-lh7a40x/io.h
@@ -11,6 +11,8 @@
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/* No ISA or PCI bus on this machine. */
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 11fbf62..3d5bcd5 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -34,6 +34,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index cf35721..3e70bd9 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -44,12 +44,12 @@
#ifndef __ASSEMBLY__
-# define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
+# define __REG(x) (*((volatile u32 *)io_p2v(x)))
/* With indexed regs we don't want to feed the index through io_p2v()
especially if it is a variable, otherwise horrible code will result. */
# define __REG2(x,y) \
- (*(volatile unsigned long *)((unsigned long)&__REG(x) + (y)))
+ (*(volatile u32 *)((u32)&__REG(x) + (y)))
# define __PREG(x) (io_v2p((u32)&(x)))
diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h
index c3bdbe4..eb2dd58 100644
--- a/include/asm-arm/arch-pxa/io.h
+++ b/include/asm-arm/arch-pxa/io.h
@@ -6,6 +6,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h
new file mode 100644
index 0000000..748406f
--- /dev/null
+++ b/include/asm-arm/arch-pxa/irda.h
@@ -0,0 +1,17 @@
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_OFF 1
+#define IR_SIRMODE 2
+#define IR_FIRMODE 4
+
+struct pxaficp_platform_data {
+ int transceiver_cap;
+ void (*transceiver_mode)(struct device *dev, int mode);
+};
+
+extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 3af7165..a75a247 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -326,6 +326,25 @@
#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+/* Hardware UART (HWUART) */
+#define HWUART HWRBR
+#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */
+#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */
+#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */
+#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */
+#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */
+#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */
+#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */
+#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */
+#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */
+#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */
+#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */
+#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */
+#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */
+#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */
+#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
#define IER_DMAE (1 << 7) /* DMA Requests Enable */
#define IER_UUE (1 << 6) /* UART Unit Enable */
#define IER_NRZE (1 << 5) /* NRZ coding Enable */
@@ -1013,14 +1032,12 @@
#define ICCR0_LBM (1 << 1) /* Loopback mode */
#define ICCR0_ITR (1 << 0) /* IrDA transmission */
-#ifdef CONFIG_PXA27x
#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
-#endif
#ifdef CONFIG_PXA27x
#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
@@ -1250,9 +1267,13 @@
#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */
#define GPIO41_FFRTS 41 /* FFUART request to send */
#define GPIO42_BTRXD 42 /* BTUART receive data */
+#define GPIO42_HWRXD 42 /* HWUART receive data */
#define GPIO43_BTTXD 43 /* BTUART transmit data */
+#define GPIO43_HWTXD 43 /* HWUART transmit data */
#define GPIO44_BTCTS 44 /* BTUART clear to send */
+#define GPIO44_HWCTS 44 /* HWUART clear to send */
#define GPIO45_BTRTS 45 /* BTUART request to send */
+#define GPIO45_HWRTS 45 /* HWUART request to send */
#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */
#define GPIO46_ICPRXD 46 /* ICP receive data */
#define GPIO46_STRXD 46 /* STD_UART receive data */
@@ -1378,17 +1399,26 @@
#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT)
#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT)
#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN)
+#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN)
#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT)
+#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT)
#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN)
+#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN)
#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT)
+#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT)
#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT)
#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN)
#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN)
#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT)
#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT)
#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN)
#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT)
#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN)
+#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT)
#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT)
#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT)
#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT)
@@ -1763,6 +1793,7 @@
#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */
#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */
#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */
+#define CKEN4_HWUART (1 << 4) /* HWUART Unit Clock Enable */
#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */
#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */
#define CKEN3_SSP2 (1 << 3) /* SSP2 Unit Clock Enable */
@@ -2282,4 +2313,11 @@
#endif
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE 0x1
+#define PWRMODE_STANDBY 0x2
+#define PWRMODE_SLEEP 0x3
+#define PWRMODE_DEEPSLEEP 0x7
+
#endif
diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h
index 4428d3e..fe38090 100644
--- a/include/asm-arm/arch-pxa/uncompress.h
+++ b/include/asm-arm/arch-pxa/uncompress.h
@@ -12,6 +12,7 @@
#define FFUART ((volatile unsigned long *)0x40100000)
#define BTUART ((volatile unsigned long *)0x40200000)
#define STUART ((volatile unsigned long *)0x40700000)
+#define HWUART ((volatile unsigned long *)0x41600000)
#define UART FFUART
diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h
index 24453c4..b4da08d 100644
--- a/include/asm-arm/arch-rpc/io.h
+++ b/include/asm-arm/arch-rpc/io.h
@@ -13,6 +13,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h
index ac57bc8..4790491 100644
--- a/include/asm-arm/arch-s3c2410/fb.h
+++ b/include/asm-arm/arch-s3c2410/fb.h
@@ -13,6 +13,7 @@
* 07-Sep-2004 RTP Created file
* 03-Nov-2004 BJD Updated and minor cleanups
* 03-Aug-2005 RTP Renamed to fb.h
+ * 26-Oct-2005 BJD Changed name of platdata init
*/
#ifndef __ASM_ARM_FB_H
@@ -64,6 +65,6 @@
unsigned long lpcsel;
};
-void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info);
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
#endif /* __ASM_ARM_FB_H */
diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h
index 4bf272e..16fbc8a 100644
--- a/include/asm-arm/arch-s3c2410/io.h
+++ b/include/asm-arm/arch-s3c2410/io.h
@@ -15,6 +15,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index 2053cba..cb33d57 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -20,6 +20,7 @@
* 18-11-2004 BJD Added S3C2440 AC97 controls
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 28-Mar-2005 LCVR Fixed definition of GPB10
+ * 26-Oct-2005 BJD Added generic configuration types
*/
@@ -43,6 +44,11 @@
/* general configuration options */
#define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
+#define S3C2410_GPIO_INPUT (0xFFFFFFF0)
+#define S3C2410_GPIO_OUTPUT (0xFFFFFFF1)
+#define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */
+#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* not available on A */
+#define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */
/* configure GPIO ports A..G */
diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h
index 19c3b1e..28711aa 100644
--- a/include/asm-arm/arch-sa1100/hardware.h
+++ b/include/asm-arm/arch-sa1100/hardware.h
@@ -22,13 +22,6 @@
/*
- * We requires absolute addresses i.e. (PCMCIA_IO_0_BASE + 0x3f8) for
- * in*()/out*() macros to be usable for all cases.
- */
-#define PCIO_BASE 0
-
-
-/*
* SA1100 internal I/O mappings
*
* We have the following mapping:
diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h
index 7d969ff..9d4fe6c 100644
--- a/include/asm-arm/arch-sa1100/io.h
+++ b/include/asm-arm/arch-sa1100/io.h
@@ -10,13 +10,19 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
*/
-#define __io(a) ((void __iomem *)(PCIO_BASE + (a)))
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+#define __io(a) __io(a)
#define __mem_pci(a) (a)
#define __mem_isa(a) (a)
diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h
index 6f52118..0f0612f 100644
--- a/include/asm-arm/arch-sa1100/system.h
+++ b/include/asm-arm/arch-sa1100/system.h
@@ -4,6 +4,7 @@
* Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
*/
#include <linux/config.h>
+#include <asm/hardware.h>
static inline void arch_idle(void)
{
diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h
index 5e6ed00..87ffa27 100644
--- a/include/asm-arm/arch-shark/io.h
+++ b/include/asm-arm/arch-shark/io.h
@@ -11,6 +11,8 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
/*
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 5c4ae8f..2e67996 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -26,7 +26,6 @@
#include <linux/types.h>
#include <asm/byteorder.h>
#include <asm/memory.h>
-#include <asm/arch/hardware.h>
/*
* ISA I/O bus memory addresses are 1:1 with the physical address.
diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h
index 4fa9508..7273c6f 100644
--- a/include/asm-arm/mach/arch.h
+++ b/include/asm-arm/mach/arch.h
@@ -48,10 +48,10 @@
* Set of macros to define architecture features. This is built into
* a table by the linker.
*/
-#define MACHINE_START(_type,_name) \
-const struct machine_desc __mach_desc_##_type \
+#define MACHINE_START(_type,_name) \
+static const struct machine_desc __mach_desc_##_type \
__attribute__((__section__(".arch.info.init"))) = { \
- .nr = MACH_TYPE_##_type, \
+ .nr = MACH_TYPE_##_type, \
.name = _name,
#define MACHINE_END \
diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h
index 9ac47cf..0619522 100644
--- a/include/asm-arm/mach/map.h
+++ b/include/asm-arm/mach/map.h
@@ -11,7 +11,7 @@
*/
struct map_desc {
unsigned long virtual;
- unsigned long physical;
+ unsigned long pfn;
unsigned long length;
unsigned int type;
};
@@ -27,6 +27,9 @@
#define MT_ROM 6
#define MT_IXP2000_DEVICE 7
+#define __phys_to_pfn(paddr) (paddr >> PAGE_SHIFT)
+#define __pfn_to_phys(pfn) (pfn << PAGE_SHIFT)
+
extern void create_memmap_holes(struct meminfo *);
extern void memtable_init(struct meminfo *);
extern void iotable_init(struct map_desc *, int);
diff --git a/include/asm-parisc/assembly.h b/include/asm-parisc/assembly.h
index 30b0234..3ce3440 100644
--- a/include/asm-parisc/assembly.h
+++ b/include/asm-parisc/assembly.h
@@ -21,7 +21,9 @@
#ifndef _PARISC_ASSEMBLY_H
#define _PARISC_ASSEMBLY_H
-#ifdef __LP64__
+#define CALLEE_FLOAT_FRAME_SIZE 80
+
+#ifdef CONFIG_64BIT
#define LDREG ldd
#define STREG std
#define LDREGX ldd,s
@@ -30,8 +32,8 @@
#define SHRREG shrd
#define RP_OFFSET 16
#define FRAME_SIZE 128
-#define CALLEE_SAVE_FRAME_SIZE 144
-#else
+#define CALLEE_REG_FRAME_SIZE 144
+#else /* CONFIG_64BIT */
#define LDREG ldw
#define STREG stw
#define LDREGX ldwx,s
@@ -40,9 +42,11 @@
#define SHRREG shr
#define RP_OFFSET 20
#define FRAME_SIZE 64
-#define CALLEE_SAVE_FRAME_SIZE 128
+#define CALLEE_REG_FRAME_SIZE 128
#endif
+#define CALLEE_SAVE_FRAME_SIZE (CALLEE_REG_FRAME_SIZE + CALLEE_FLOAT_FRAME_SIZE)
+
#ifdef CONFIG_PA20
#define BL b,l
# ifdef CONFIG_64BIT
@@ -300,9 +304,35 @@
fldd,mb -8(\regs), %fr0
.endm
+ .macro callee_save_float
+ fstd,ma %fr12, 8(%r30)
+ fstd,ma %fr13, 8(%r30)
+ fstd,ma %fr14, 8(%r30)
+ fstd,ma %fr15, 8(%r30)
+ fstd,ma %fr16, 8(%r30)
+ fstd,ma %fr17, 8(%r30)
+ fstd,ma %fr18, 8(%r30)
+ fstd,ma %fr19, 8(%r30)
+ fstd,ma %fr20, 8(%r30)
+ fstd,ma %fr21, 8(%r30)
+ .endm
+
+ .macro callee_rest_float
+ fldd,mb -8(%r30), %fr21
+ fldd,mb -8(%r30), %fr20
+ fldd,mb -8(%r30), %fr19
+ fldd,mb -8(%r30), %fr18
+ fldd,mb -8(%r30), %fr17
+ fldd,mb -8(%r30), %fr16
+ fldd,mb -8(%r30), %fr15
+ fldd,mb -8(%r30), %fr14
+ fldd,mb -8(%r30), %fr13
+ fldd,mb -8(%r30), %fr12
+ .endm
+
#ifdef __LP64__
.macro callee_save
- std,ma %r3, CALLEE_SAVE_FRAME_SIZE(%r30)
+ std,ma %r3, CALLEE_REG_FRAME_SIZE(%r30)
mfctl %cr27, %r3
std %r4, -136(%r30)
std %r5, -128(%r30)
@@ -340,13 +370,13 @@
ldd -128(%r30), %r5
ldd -136(%r30), %r4
mtctl %r3, %cr27
- ldd,mb -CALLEE_SAVE_FRAME_SIZE(%r30), %r3
+ ldd,mb -CALLEE_REG_FRAME_SIZE(%r30), %r3
.endm
#else /* ! __LP64__ */
.macro callee_save
- stw,ma %r3, CALLEE_SAVE_FRAME_SIZE(%r30)
+ stw,ma %r3, CALLEE_REG_FRAME_SIZE(%r30)
mfctl %cr27, %r3
stw %r4, -124(%r30)
stw %r5, -120(%r30)
@@ -384,7 +414,7 @@
ldw -120(%r30), %r5
ldw -124(%r30), %r4
mtctl %r3, %cr27
- ldw,mb -CALLEE_SAVE_FRAME_SIZE(%r30), %r3
+ ldw,mb -CALLEE_REG_FRAME_SIZE(%r30), %r3
.endm
#endif /* ! __LP64__ */
@@ -450,5 +480,30 @@
REST_CR (%cr22, PT_PSW (\regs))
.endm
+
+ /* First step to create a "relied upon translation"
+ * See PA 2.0 Arch. page F-4 and F-5.
+ *
+ * The ssm was originally necessary due to a "PCxT bug".
+ * But someone decided it needed to be added to the architecture
+ * and this "feature" went into rev3 of PA-RISC 1.1 Arch Manual.
+ * It's been carried forward into PA 2.0 Arch as well. :^(
+ *
+ * "ssm 0,%r0" is a NOP with side effects (prefetch barrier).
+ * rsm/ssm prevents the ifetch unit from speculatively fetching
+ * instructions past this line in the code stream.
+ * PA 2.0 processor will single step all insn in the same QUAD (4 insn).
+ */
+ .macro pcxt_ssm_bug
+ rsm PSW_SM_I,%r0
+ nop /* 1 */
+ nop /* 2 */
+ nop /* 3 */
+ nop /* 4 */
+ nop /* 5 */
+ nop /* 6 */
+ nop /* 7 */
+ .endm
+
#endif /* __ASSEMBLY__ */
#endif
diff --git a/include/asm-parisc/bitops.h b/include/asm-parisc/bitops.h
index af7db69..55b98c6 100644
--- a/include/asm-parisc/bitops.h
+++ b/include/asm-parisc/bitops.h
@@ -2,7 +2,7 @@
#define _PARISC_BITOPS_H
#include <linux/compiler.h>
-#include <asm/spinlock.h>
+#include <asm/types.h> /* for BITS_PER_LONG/SHIFT_PER_LONG */
#include <asm/byteorder.h>
#include <asm/atomic.h>
@@ -12,193 +12,157 @@
* to include/asm-i386/bitops.h or kerneldoc
*/
-#ifdef __LP64__
-# define SHIFT_PER_LONG 6
-#ifndef BITS_PER_LONG
-# define BITS_PER_LONG 64
-#endif
-#else
-# define SHIFT_PER_LONG 5
-#ifndef BITS_PER_LONG
-# define BITS_PER_LONG 32
-#endif
-#endif
-
-#define CHOP_SHIFTCOUNT(x) ((x) & (BITS_PER_LONG - 1))
+#define CHOP_SHIFTCOUNT(x) (((unsigned long) (x)) & (BITS_PER_LONG - 1))
#define smp_mb__before_clear_bit() smp_mb()
#define smp_mb__after_clear_bit() smp_mb()
-static __inline__ void set_bit(int nr, volatile unsigned long * address)
+/* See http://marc.theaimsgroup.com/?t=108826637900003 for discussion
+ * on use of volatile and __*_bit() (set/clear/change):
+ * *_bit() want use of volatile.
+ * __*_bit() are "relaxed" and don't use spinlock or volatile.
+ */
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
*addr |= mask;
_atomic_spin_unlock_irqrestore(addr, flags);
}
-static __inline__ void __set_bit(int nr, volatile unsigned long * address)
+static __inline__ void __set_bit(unsigned long nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG);
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- *addr |= mask;
+ *m |= 1UL << CHOP_SHIFTCOUNT(nr);
}
-static __inline__ void clear_bit(int nr, volatile unsigned long * address)
+static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long mask = ~(1UL << CHOP_SHIFTCOUNT(nr));
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
- *addr &= ~mask;
+ *addr &= mask;
_atomic_spin_unlock_irqrestore(addr, flags);
}
-static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long * address)
+static __inline__ void __clear_bit(unsigned long nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG);
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- *addr &= ~mask;
+ *m &= ~(1UL << CHOP_SHIFTCOUNT(nr));
}
-static __inline__ void change_bit(int nr, volatile unsigned long * address)
+static __inline__ void change_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
*addr ^= mask;
_atomic_spin_unlock_irqrestore(addr, flags);
}
-static __inline__ void __change_bit(int nr, volatile unsigned long * address)
+static __inline__ void __change_bit(unsigned long nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
+ unsigned long *m = (unsigned long *) addr + (nr >> SHIFT_PER_LONG);
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- *addr ^= mask;
+ *m ^= 1UL << CHOP_SHIFTCOUNT(nr);
}
-static __inline__ int test_and_set_bit(int nr, volatile unsigned long * address)
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long oldbit;
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr |= mask;
+ oldbit = *addr;
+ *addr = oldbit | mask;
_atomic_spin_unlock_irqrestore(addr, flags);
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
static __inline__ int __test_and_set_bit(int nr, volatile unsigned long * address)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long oldbit;
+ unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG);
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr |= mask;
+ oldbit = *addr;
+ *addr = oldbit | mask;
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
-static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * address)
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long oldbit;
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr &= ~mask;
+ oldbit = *addr;
+ *addr = oldbit & ~mask;
_atomic_spin_unlock_irqrestore(addr, flags);
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
static __inline__ int __test_and_clear_bit(int nr, volatile unsigned long * address)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG);
+ unsigned long oldbit;
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr &= ~mask;
+ oldbit = *addr;
+ *addr = oldbit & ~mask;
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
-static __inline__ int test_and_change_bit(int nr, volatile unsigned long * address)
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long oldbit;
unsigned long flags;
addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
_atomic_spin_lock_irqsave(addr, flags);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr ^= mask;
+ oldbit = *addr;
+ *addr = oldbit ^ mask;
_atomic_spin_unlock_irqrestore(addr, flags);
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
static __inline__ int __test_and_change_bit(int nr, volatile unsigned long * address)
{
- unsigned long mask;
- unsigned long *addr = (unsigned long *) address;
- int oldbit;
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ unsigned long *addr = (unsigned long *)address + (nr >> SHIFT_PER_LONG);
+ unsigned long oldbit;
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
- oldbit = (*addr & mask) ? 1 : 0;
- *addr ^= mask;
+ oldbit = *addr;
+ *addr = oldbit ^ mask;
- return oldbit;
+ return (oldbit & mask) ? 1 : 0;
}
static __inline__ int test_bit(int nr, const volatile unsigned long *address)
{
- unsigned long mask;
- const unsigned long *addr = (const unsigned long *)address;
-
- addr += (nr >> SHIFT_PER_LONG);
- mask = 1L << CHOP_SHIFTCOUNT(nr);
+ unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+ const unsigned long *addr = (const unsigned long *)address + (nr >> SHIFT_PER_LONG);
return !!(*addr & mask);
}
@@ -229,7 +193,7 @@
unsigned long ret;
__asm__(
-#if BITS_PER_LONG > 32
+#ifdef __LP64__
" ldi 63,%1\n"
" extrd,u,*<> %0,63,32,%%r0\n"
" extrd,u,*TR %0,31,32,%0\n" /* move top 32-bits down */
@@ -304,14 +268,7 @@
* hweightN: returns the hamming weight (i.e. the number
* of bits set) of a N-bit word
*/
-#define hweight64(x) \
-({ \
- unsigned long __x = (x); \
- unsigned int __w; \
- __w = generic_hweight32((unsigned int) __x); \
- __w += generic_hweight32((unsigned int) (__x>>32)); \
- __w; \
-})
+#define hweight64(x) generic_hweight64(x)
#define hweight32(x) generic_hweight32(x)
#define hweight16(x) generic_hweight16(x)
#define hweight8(x) generic_hweight8(x)
@@ -324,7 +281,13 @@
*/
static inline int sched_find_first_bit(const unsigned long *b)
{
-#ifndef __LP64__
+#ifdef __LP64__
+ if (unlikely(b[0]))
+ return __ffs(b[0]);
+ if (unlikely(b[1]))
+ return __ffs(b[1]) + 64;
+ return __ffs(b[2]) + 128;
+#else
if (unlikely(b[0]))
return __ffs(b[0]);
if (unlikely(b[1]))
@@ -334,14 +297,6 @@
if (b[3])
return __ffs(b[3]) + 96;
return __ffs(b[4]) + 128;
-#else
- if (unlikely(b[0]))
- return __ffs(b[0]);
- if (unlikely(((unsigned int)b[1])))
- return __ffs(b[1]) + 64;
- if (b[1] >> 32)
- return __ffs(b[1] >> 32) + 96;
- return __ffs(b[2]) + 128;
#endif
}
@@ -391,7 +346,7 @@
static __inline__ unsigned long find_next_bit(const unsigned long *addr, unsigned long size, unsigned long offset)
{
- const unsigned long *p = addr + (offset >> 6);
+ const unsigned long *p = addr + (offset >> SHIFT_PER_LONG);
unsigned long result = offset & ~(BITS_PER_LONG-1);
unsigned long tmp;
@@ -445,71 +400,90 @@
* test_and_{set,clear}_bit guarantee atomicity without
* disabling interrupts.
*/
-#ifdef __LP64__
-#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr)
-#define ext2_set_bit_atomic(l,nr,addr) test_and_set_bit((nr) ^ 0x38, (unsigned long *)addr)
-#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr)
-#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x38, (unsigned long *)addr)
-#else
-#define ext2_set_bit(nr, addr) __test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr)
-#define ext2_set_bit_atomic(l,nr,addr) test_and_set_bit((nr) ^ 0x18, (unsigned long *)addr)
-#define ext2_clear_bit(nr, addr) __test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr)
-#define ext2_clear_bit_atomic(l,nr,addr) test_and_clear_bit((nr) ^ 0x18, (unsigned long *)addr)
-#endif
+
+/* '3' is bits per byte */
+#define LE_BYTE_ADDR ((sizeof(unsigned long) - 1) << 3)
+
+#define ext2_test_bit(nr, addr) \
+ test_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
+#define ext2_set_bit(nr, addr) \
+ __test_and_set_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
+#define ext2_clear_bit(nr, addr) \
+ __test_and_clear_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
+
+#define ext2_set_bit_atomic(l,nr,addr) \
+ test_and_set_bit((nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
+#define ext2_clear_bit_atomic(l,nr,addr) \
+ test_and_clear_bit( (nr) ^ LE_BYTE_ADDR, (unsigned long *)addr)
#endif /* __KERNEL__ */
-static __inline__ int ext2_test_bit(int nr, __const__ void * addr)
-{
- __const__ unsigned char *ADDR = (__const__ unsigned char *) addr;
-
- return (ADDR[nr >> 3] >> (nr & 7)) & 1;
-}
-
-/*
- * This implementation of ext2_find_{first,next}_zero_bit was stolen from
- * Linus' asm-alpha/bitops.h and modified for a big-endian machine.
- */
#define ext2_find_first_zero_bit(addr, size) \
- ext2_find_next_zero_bit((addr), (size), 0)
+ ext2_find_next_zero_bit((addr), (size), 0)
-extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr,
- unsigned long size, unsigned long offset)
+/* include/linux/byteorder does not support "unsigned long" type */
+static inline unsigned long ext2_swabp(unsigned long * x)
{
- unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
- unsigned int result = offset & ~31UL;
- unsigned int tmp;
+#ifdef __LP64__
+ return (unsigned long) __swab64p((u64 *) x);
+#else
+ return (unsigned long) __swab32p((u32 *) x);
+#endif
+}
+
+/* include/linux/byteorder doesn't support "unsigned long" type */
+static inline unsigned long ext2_swab(unsigned long y)
+{
+#ifdef __LP64__
+ return (unsigned long) __swab64((u64) y);
+#else
+ return (unsigned long) __swab32((u32) y);
+#endif
+}
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+ unsigned long *p = (unsigned long *) addr + (offset >> SHIFT_PER_LONG);
+ unsigned long result = offset & ~(BITS_PER_LONG - 1);
+ unsigned long tmp;
if (offset >= size)
return size;
size -= result;
- offset &= 31UL;
+ offset &= (BITS_PER_LONG - 1UL);
if (offset) {
- tmp = cpu_to_le32p(p++);
- tmp |= ~0UL >> (32-offset);
- if (size < 32)
+ tmp = ext2_swabp(p++);
+ tmp |= (~0UL >> (BITS_PER_LONG - offset));
+ if (size < BITS_PER_LONG)
goto found_first;
- if (tmp != ~0U)
+ if (~tmp)
goto found_middle;
- size -= 32;
- result += 32;
+ size -= BITS_PER_LONG;
+ result += BITS_PER_LONG;
}
- while (size >= 32) {
- if ((tmp = cpu_to_le32p(p++)) != ~0U)
- goto found_middle;
- result += 32;
- size -= 32;
+
+ while (size & ~(BITS_PER_LONG - 1)) {
+ if (~(tmp = *(p++)))
+ goto found_middle_swap;
+ result += BITS_PER_LONG;
+ size -= BITS_PER_LONG;
}
if (!size)
return result;
- tmp = cpu_to_le32p(p);
+ tmp = ext2_swabp(p);
found_first:
- tmp |= ~0U << size;
+ tmp |= ~0UL << size;
+ if (tmp == ~0UL) /* Are any bits zero? */
+ return result + size; /* Nope. Skip ffz */
found_middle:
return result + ffz(tmp);
+
+found_middle_swap:
+ return result + ffz(ext2_swab(tmp));
}
+
/* Bitmap functions for the minix filesystem. */
#define minix_test_and_set_bit(nr,addr) ext2_set_bit(nr,addr)
#define minix_set_bit(nr,addr) ((void)ext2_set_bit(nr,addr))
diff --git a/include/asm-parisc/errno.h b/include/asm-parisc/errno.h
index 08464c4..e2f3ddc 100644
--- a/include/asm-parisc/errno.h
+++ b/include/asm-parisc/errno.h
@@ -114,6 +114,7 @@
#define ENOTSUP 252 /* Function not implemented (POSIX.4 / HPUX) */
#define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */
+#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */
/* for robust mutexes */
#define EOWNERDEAD 254 /* Owner died */
diff --git a/include/asm-parisc/grfioctl.h b/include/asm-parisc/grfioctl.h
index d3cfc01..6a91031 100644
--- a/include/asm-parisc/grfioctl.h
+++ b/include/asm-parisc/grfioctl.h
@@ -69,6 +69,8 @@
#define CRT_ID_TVRX S9000_ID_98765 /* TVRX (gto/falcon) */
#define CRT_ID_ARTIST S9000_ID_ARTIST /* Artist */
#define CRT_ID_SUMMIT 0x2FC1066B /* Summit FX2, FX4, FX6 ... */
+#define CRT_ID_LEGO 0x35ACDA30 /* Lego FX5, FX10 ... */
+#define CRT_ID_PINNACLE 0x35ACDA16 /* Pinnacle FXe */
/* structure for ioctl(GCDESCRIBE) */
diff --git a/include/asm-parisc/led.h b/include/asm-parisc/led.h
index 1ac8ab6..efadfd5 100644
--- a/include/asm-parisc/led.h
+++ b/include/asm-parisc/led.h
@@ -23,9 +23,6 @@
#define LED_CMD_REG_NONE 0 /* NULL == no addr for the cmd register */
-/* led tasklet struct */
-extern struct tasklet_struct led_tasklet;
-
/* register_led_driver() */
int __init register_led_driver(int model, unsigned long cmd_reg, unsigned long data_reg);
diff --git a/include/asm-parisc/parisc-device.h b/include/asm-parisc/parisc-device.h
index ef69ab4..1d247e3 100644
--- a/include/asm-parisc/parisc-device.h
+++ b/include/asm-parisc/parisc-device.h
@@ -1,7 +1,7 @@
#include <linux/device.h>
struct parisc_device {
- unsigned long hpa; /* Hard Physical Address */
+ struct resource hpa; /* Hard Physical Address */
struct parisc_device_id id;
struct parisc_driver *driver; /* Driver for this device */
char name[80]; /* The hardware description */
@@ -39,6 +39,11 @@
#define to_parisc_driver(d) container_of(d, struct parisc_driver, drv)
#define parisc_parent(d) to_parisc_device(d->dev.parent)
+static inline char *parisc_pathname(struct parisc_device *d)
+{
+ return d->dev.bus_id;
+}
+
static inline void
parisc_set_drvdata(struct parisc_device *d, void *p)
{
diff --git a/include/asm-parisc/pci.h b/include/asm-parisc/pci.h
index d0b761f..fa39d07 100644
--- a/include/asm-parisc/pci.h
+++ b/include/asm-parisc/pci.h
@@ -69,7 +69,7 @@
#define PCI_PORT_HBA(a) ((a) >> HBA_PORT_SPACE_BITS)
#define PCI_PORT_ADDR(a) ((a) & (HBA_PORT_SPACE_SIZE - 1))
-#if CONFIG_64BIT
+#ifdef CONFIG_64BIT
#define PCI_F_EXTEND 0xffffffff00000000UL
#define PCI_IS_LMMIO(hba,a) pci_is_lmmio(hba,a)
diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h
index 820c6e7..c28fb6f 100644
--- a/include/asm-parisc/pgtable.h
+++ b/include/asm-parisc/pgtable.h
@@ -501,6 +501,8 @@
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
remap_pfn_range(vma, vaddr, pfn, size, prot)
+#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE)
+
#define MK_IOSPACE_PFN(space, pfn) (pfn)
#define GET_IOSPACE(pfn) 0
#define GET_PFN(pfn) (pfn)
diff --git a/include/asm-parisc/processor.h b/include/asm-parisc/processor.h
index a9dfadd..aae40e8 100644
--- a/include/asm-parisc/processor.h
+++ b/include/asm-parisc/processor.h
@@ -122,8 +122,27 @@
};
/* Thread struct flags. */
+#define PARISC_UAC_NOPRINT (1UL << 0) /* see prctl and unaligned.c */
+#define PARISC_UAC_SIGBUS (1UL << 1)
#define PARISC_KERNEL_DEATH (1UL << 31) /* see die_if_kernel()... */
+#define PARISC_UAC_SHIFT 0
+#define PARISC_UAC_MASK (PARISC_UAC_NOPRINT|PARISC_UAC_SIGBUS)
+
+#define SET_UNALIGN_CTL(task,value) \
+ ({ \
+ (task)->thread.flags = (((task)->thread.flags & ~PARISC_UAC_MASK) \
+ | (((value) << PARISC_UAC_SHIFT) & \
+ PARISC_UAC_MASK)); \
+ 0; \
+ })
+
+#define GET_UNALIGN_CTL(task,addr) \
+ ({ \
+ put_user(((task)->thread.flags & PARISC_UAC_MASK) \
+ >> PARISC_UAC_SHIFT, (int __user *) (addr)); \
+ })
+
#define INIT_THREAD { \
regs: { gr: { 0, }, \
fr: { 0, }, \
diff --git a/include/asm-parisc/psw.h b/include/asm-parisc/psw.h
index 5132302..4334d6c 100644
--- a/include/asm-parisc/psw.h
+++ b/include/asm-parisc/psw.h
@@ -1,4 +1,7 @@
#ifndef _PARISC_PSW_H
+
+#include <linux/config.h>
+
#define PSW_I 0x00000001
#define PSW_D 0x00000002
#define PSW_P 0x00000004
@@ -9,6 +12,16 @@
#define PSW_G 0x00000040 /* PA1.x only */
#define PSW_O 0x00000080 /* PA2.0 only */
+/* ssm/rsm instructions number PSW_W and PSW_E differently */
+#define PSW_SM_I PSW_I /* Enable External Interrupts */
+#define PSW_SM_D PSW_D
+#define PSW_SM_P PSW_P
+#define PSW_SM_Q PSW_Q /* Enable Interrupt State Collection */
+#define PSW_SM_R PSW_R /* Enable Recover Counter Trap */
+#define PSW_SM_W 0x200 /* PA2.0 only : Enable Wide Mode */
+
+#define PSW_SM_QUIET PSW_SM_R+PSW_SM_Q+PSW_SM_P+PSW_SM_D+PSW_SM_I
+
#define PSW_CB 0x0000ff00
#define PSW_M 0x00010000
@@ -30,33 +43,21 @@
#define PSW_Z 0x40000000 /* PA1.x only */
#define PSW_Y 0x80000000 /* PA1.x only */
-#ifdef __LP64__
-#define PSW_HI_CB 0x000000ff /* PA2.0 only */
+#ifdef CONFIG_64BIT
+# define PSW_HI_CB 0x000000ff /* PA2.0 only */
#endif
-/* PSW bits to be used with ssm/rsm */
-#define PSW_SM_I 0x1
-#define PSW_SM_D 0x2
-#define PSW_SM_P 0x4
-#define PSW_SM_Q 0x8
-#define PSW_SM_R 0x10
-#define PSW_SM_F 0x20
-#define PSW_SM_G 0x40
-#define PSW_SM_O 0x80
-#define PSW_SM_E 0x100
-#define PSW_SM_W 0x200
-
-#ifdef __LP64__
-# define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
-# define KERNEL_PSW (PSW_W | PSW_C | PSW_Q | PSW_P | PSW_D)
-# define REAL_MODE_PSW (PSW_W | PSW_Q)
-# define USER_PSW_MASK (PSW_W | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
-# define USER_PSW_HI_MASK (PSW_HI_CB)
-#else
-# define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
-# define KERNEL_PSW (PSW_C | PSW_Q | PSW_P | PSW_D)
-# define REAL_MODE_PSW (PSW_Q)
-# define USER_PSW_MASK (PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
+#ifdef CONFIG_64BIT
+# define USER_PSW_HI_MASK PSW_HI_CB
+# define WIDE_PSW PSW_W
+#else
+# define WIDE_PSW 0
#endif
+/* Used when setting up for rfi */
+#define KERNEL_PSW (WIDE_PSW | PSW_C | PSW_Q | PSW_P | PSW_D)
+#define REAL_MODE_PSW (WIDE_PSW | PSW_Q)
+#define USER_PSW_MASK (WIDE_PSW | PSW_T | PSW_N | PSW_X | PSW_B | PSW_V | PSW_CB)
+#define USER_PSW (PSW_C | PSW_Q | PSW_P | PSW_D | PSW_I)
+
#endif
diff --git a/include/asm-parisc/ptrace.h b/include/asm-parisc/ptrace.h
index 3f428aa..93f990e 100644
--- a/include/asm-parisc/ptrace.h
+++ b/include/asm-parisc/ptrace.h
@@ -49,7 +49,7 @@
#define user_mode(regs) (((regs)->iaoq[0] & 3) ? 1 : 0)
#define user_space(regs) (((regs)->iasq[1] != 0) ? 1 : 0)
#define instruction_pointer(regs) ((regs)->iaoq[0] & ~3)
-#define profile_pc(regs) instruction_pointer(regs)
+unsigned long profile_pc(struct pt_regs *);
extern void show_regs(struct pt_regs *);
#endif
diff --git a/include/asm-parisc/spinlock.h b/include/asm-parisc/spinlock.h
index 43eaa6e..7c3f406 100644
--- a/include/asm-parisc/spinlock.h
+++ b/include/asm-parisc/spinlock.h
@@ -5,11 +5,6 @@
#include <asm/processor.h>
#include <asm/spinlock_types.h>
-/* Note that PA-RISC has to use `1' to mean unlocked and `0' to mean locked
- * since it only has load-and-zero. Moreover, at least on some PA processors,
- * the semaphore address has to be 16-byte aligned.
- */
-
static inline int __raw_spin_is_locked(raw_spinlock_t *x)
{
volatile unsigned int *a = __ldcw_align(x);
diff --git a/include/asm-parisc/spinlock_types.h b/include/asm-parisc/spinlock_types.h
index 785bba8..d6b479b 100644
--- a/include/asm-parisc/spinlock_types.h
+++ b/include/asm-parisc/spinlock_types.h
@@ -6,11 +6,15 @@
#endif
typedef struct {
+#ifdef CONFIG_PA20
+ volatile unsigned int slock;
+# define __RAW_SPIN_LOCK_UNLOCKED { 1 }
+#else
volatile unsigned int lock[4];
+# define __RAW_SPIN_LOCK_UNLOCKED { { 1, 1, 1, 1 } }
+#endif
} raw_spinlock_t;
-#define __RAW_SPIN_LOCK_UNLOCKED { { 1, 1, 1, 1 } }
-
typedef struct {
raw_spinlock_t lock;
volatile int counter;
diff --git a/include/asm-parisc/system.h b/include/asm-parisc/system.h
index 26ff844..f3928d3 100644
--- a/include/asm-parisc/system.h
+++ b/include/asm-parisc/system.h
@@ -138,13 +138,7 @@
#define set_wmb(var, value) do { var = value; wmb(); } while (0)
-/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */
-#define __ldcw(a) ({ \
- unsigned __ret; \
- __asm__ __volatile__("ldcw 0(%1),%0" : "=r" (__ret) : "r" (a)); \
- __ret; \
-})
-
+#ifndef CONFIG_PA20
/* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data,
and GCC only guarantees 8-byte alignment for stack locals, we can't
be assured of 16-byte alignment for atomic lock data even if we
@@ -152,37 +146,41 @@
we use a struct containing an array of four ints for the atomic lock
type and dynamically select the 16-byte aligned int from the array
for the semaphore. */
+
#define __PA_LDCW_ALIGNMENT 16
#define __ldcw_align(a) ({ \
unsigned long __ret = (unsigned long) &(a)->lock[0]; \
__ret = (__ret + __PA_LDCW_ALIGNMENT - 1) & ~(__PA_LDCW_ALIGNMENT - 1); \
(volatile unsigned int *) __ret; \
})
+#define LDCW "ldcw"
+
+#else /*CONFIG_PA20*/
+/* From: "Jim Hull" <jim.hull of hp.com>
+ I've attached a summary of the change, but basically, for PA 2.0, as
+ long as the ",CO" (coherent operation) completer is specified, then the
+ 16-byte alignment requirement for ldcw and ldcd is relaxed, and instead
+ they only require "natural" alignment (4-byte for ldcw, 8-byte for
+ ldcd). */
+
+#define __PA_LDCW_ALIGNMENT 4
+#define __ldcw_align(a) ((volatile unsigned int *)a)
+#define LDCW "ldcw,co"
+
+#endif /*!CONFIG_PA20*/
+
+/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*. */
+#define __ldcw(a) ({ \
+ unsigned __ret; \
+ __asm__ __volatile__(LDCW " 0(%1),%0" : "=r" (__ret) : "r" (a)); \
+ __ret; \
+})
#ifdef CONFIG_SMP
# define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
#endif
#define KERNEL_START (0x10100000 - 0x1000)
-
-/* This is for the serialisation of PxTLB broadcasts. At least on the
- * N class systems, only one PxTLB inter processor broadcast can be
- * active at any one time on the Merced bus. This tlb purge
- * synchronisation is fairly lightweight and harmless so we activate
- * it on all SMP systems not just the N class. */
-#ifdef CONFIG_SMP
-extern spinlock_t pa_tlb_lock;
-
-#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
-#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
-
-#else
-
-#define purge_tlb_start(x) do { } while(0)
-#define purge_tlb_end(x) do { } while (0)
-
-#endif
-
#define arch_align_stack(x) (x)
#endif
diff --git a/include/asm-parisc/tlbflush.h b/include/asm-parisc/tlbflush.h
index eb27b78..84af4ab 100644
--- a/include/asm-parisc/tlbflush.h
+++ b/include/asm-parisc/tlbflush.h
@@ -7,6 +7,26 @@
#include <linux/mm.h>
#include <asm/mmu_context.h>
+
+/* This is for the serialisation of PxTLB broadcasts. At least on the
+ * N class systems, only one PxTLB inter processor broadcast can be
+ * active at any one time on the Merced bus. This tlb purge
+ * synchronisation is fairly lightweight and harmless so we activate
+ * it on all SMP systems not just the N class. */
+#ifdef CONFIG_SMP
+extern spinlock_t pa_tlb_lock;
+
+#define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
+#define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
+
+#else
+
+#define purge_tlb_start(x) do { } while(0)
+#define purge_tlb_end(x) do { } while (0)
+
+#endif
+
+
extern void flush_tlb_all(void);
/*
@@ -64,29 +84,26 @@
{
unsigned long npages;
-
npages = ((end - (start & PAGE_MASK)) + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
- if (npages >= 512) /* XXX arbitrary, should be tuned */
+ if (npages >= 512) /* 2MB of space: arbitrary, should be tuned */
flush_tlb_all();
else {
mtsp(vma->vm_mm->context,1);
+ purge_tlb_start();
if (split_tlb) {
- purge_tlb_start();
while (npages--) {
pdtlb(start);
pitlb(start);
start += PAGE_SIZE;
}
- purge_tlb_end();
} else {
- purge_tlb_start();
while (npages--) {
pdtlb(start);
start += PAGE_SIZE;
}
- purge_tlb_end();
}
+ purge_tlb_end();
}
}
diff --git a/include/asm-parisc/types.h b/include/asm-parisc/types.h
index d21b9d0..34fdce3 100644
--- a/include/asm-parisc/types.h
+++ b/include/asm-parisc/types.h
@@ -33,8 +33,10 @@
#ifdef __LP64__
#define BITS_PER_LONG 64
+#define SHIFT_PER_LONG 6
#else
#define BITS_PER_LONG 32
+#define SHIFT_PER_LONG 5
#endif
#ifndef __ASSEMBLY__
diff --git a/include/asm-parisc/unistd.h b/include/asm-parisc/unistd.h
index 6a9f0ca..e7a620c 100644
--- a/include/asm-parisc/unistd.h
+++ b/include/asm-parisc/unistd.h
@@ -687,8 +687,8 @@
#define __NR_shmget (__NR_Linux + 194)
#define __NR_shmctl (__NR_Linux + 195)
-#define __NR_getpmsg (__NR_Linux + 196) /* some people actually want streams */
-#define __NR_putpmsg (__NR_Linux + 197) /* some people actually want streams */
+#define __NR_getpmsg (__NR_Linux + 196) /* Somebody *wants* streams? */
+#define __NR_putpmsg (__NR_Linux + 197)
#define __NR_lstat64 (__NR_Linux + 198)
#define __NR_truncate64 (__NR_Linux + 199)
@@ -755,8 +755,14 @@
#define __NR_mbind (__NR_Linux + 260)
#define __NR_get_mempolicy (__NR_Linux + 261)
#define __NR_set_mempolicy (__NR_Linux + 262)
+#define __NR_vserver (__NR_Linux + 263)
+#define __NR_add_key (__NR_Linux + 264)
+#define __NR_request_key (__NR_Linux + 265)
+#define __NR_keyctl (__NR_Linux + 266)
+#define __NR_ioprio_set (__NR_Linux + 267)
+#define __NR_ioprio_get (__NR_Linux + 268)
-#define __NR_Linux_syscalls 263
+#define __NR_Linux_syscalls 269
#define HPUX_GATEWAY_ADDR 0xC0000004
#define LINUX_GATEWAY_ADDR 0x100
@@ -807,10 +813,10 @@
#define K_INLINE_SYSCALL(name, nr, args...) ({ \
long __sys_res; \
{ \
- register unsigned long __res asm("r28"); \
+ register unsigned long __res __asm__("r28"); \
K_LOAD_ARGS_##nr(args) \
/* FIXME: HACK stw/ldw r19 around syscall */ \
- asm volatile( \
+ __asm__ volatile( \
K_STW_ASM_PIC \
" ble 0x100(%%sr2, %%r0)\n" \
" ldi %1, %%r20\n" \
diff --git a/include/linux/device.h b/include/linux/device.h
index 95d607a..a9e72ac 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -28,19 +28,6 @@
#define BUS_ID_SIZE KOBJ_NAME_LEN
-enum {
- SUSPEND_NOTIFY,
- SUSPEND_SAVE_STATE,
- SUSPEND_DISABLE,
- SUSPEND_POWER_DOWN,
-};
-
-enum {
- RESUME_POWER_ON,
- RESUME_RESTORE_STATE,
- RESUME_ENABLE,
-};
-
struct device;
struct device_driver;
struct class;
@@ -115,8 +102,8 @@
int (*probe) (struct device * dev);
int (*remove) (struct device * dev);
void (*shutdown) (struct device * dev);
- int (*suspend) (struct device * dev, pm_message_t state, u32 level);
- int (*resume) (struct device * dev, u32 level);
+ int (*suspend) (struct device * dev, pm_message_t state);
+ int (*resume) (struct device * dev);
};
@@ -190,7 +177,43 @@
extern int class_create_file(struct class *, const struct class_attribute *);
extern void class_remove_file(struct class *, const struct class_attribute *);
+struct class_device_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct class_device *, char * buf);
+ ssize_t (*store)(struct class_device *, const char * buf, size_t count);
+};
+#define CLASS_DEVICE_ATTR(_name,_mode,_show,_store) \
+struct class_device_attribute class_device_attr_##_name = \
+ __ATTR(_name,_mode,_show,_store)
+
+extern int class_device_create_file(struct class_device *,
+ const struct class_device_attribute *);
+
+/**
+ * struct class_device - class devices
+ * @class: pointer to the parent class for this class device. This is required.
+ * @devt: for internal use by the driver core only.
+ * @node: for internal use by the driver core only.
+ * @kobj: for internal use by the driver core only.
+ * @devt_attr: for internal use by the driver core only.
+ * @dev: if set, a symlink to the struct device is created in the sysfs
+ * directory for this struct class device.
+ * @class_data: pointer to whatever you want to store here for this struct
+ * class_device. Use class_get_devdata() and class_set_devdata() to get and
+ * set this pointer.
+ * @parent: pointer to a struct class_device that is the parent of this struct
+ * class_device. If NULL, this class_device will show up at the root of the
+ * struct class in sysfs (which is probably what you want to have happen.)
+ * @release: pointer to a release function for this struct class_device. If
+ * set, this will be called instead of the class specific release function.
+ * Only use this if you want to override the default release function, like
+ * when you are nesting class_device structures.
+ * @hotplug: pointer to a hotplug function for this struct class_device. If
+ * set, this will be called instead of the class specific hotplug function.
+ * Only use this if you want to override the default hotplug function, like
+ * when you are nesting class_device structures.
+ */
struct class_device {
struct list_head node;
@@ -198,9 +221,14 @@
struct class * class; /* required */
dev_t devt; /* dev_t, creates the sysfs "dev" */
struct class_device_attribute *devt_attr;
+ struct class_device_attribute uevent_attr;
struct device * dev; /* not necessary, but nice to have */
void * class_data; /* class-specific data */
+ struct class_device *parent; /* parent of this child device, if there is one */
+ void (*release)(struct class_device *dev);
+ int (*hotplug)(struct class_device *dev, char **envp,
+ int num_envp, char *buffer, int buffer_size);
char class_id[BUS_ID_SIZE]; /* unique to this class */
};
@@ -228,18 +256,6 @@
extern struct class_device * class_device_get(struct class_device *);
extern void class_device_put(struct class_device *);
-struct class_device_attribute {
- struct attribute attr;
- ssize_t (*show)(struct class_device *, char * buf);
- ssize_t (*store)(struct class_device *, const char * buf, size_t count);
-};
-
-#define CLASS_DEVICE_ATTR(_name,_mode,_show,_store) \
-struct class_device_attribute class_device_attr_##_name = \
- __ATTR(_name,_mode,_show,_store)
-
-extern int class_device_create_file(struct class_device *,
- const struct class_device_attribute *);
extern void class_device_remove_file(struct class_device *,
const struct class_device_attribute *);
extern int class_device_create_bin_file(struct class_device *,
@@ -251,8 +267,8 @@
struct list_head node;
struct class *class;
- int (*add) (struct class_device *);
- void (*remove) (struct class_device *);
+ int (*add) (struct class_device *, struct class_interface *);
+ void (*remove) (struct class_device *, struct class_interface *);
};
extern int class_interface_register(struct class_interface *);
@@ -260,12 +276,29 @@
extern struct class *class_create(struct module *owner, char *name);
extern void class_destroy(struct class *cls);
-extern struct class_device *class_device_create(struct class *cls, dev_t devt,
- struct device *device, char *fmt, ...)
- __attribute__((format(printf,4,5)));
+extern struct class_device *class_device_create(struct class *cls,
+ struct class_device *parent,
+ dev_t devt,
+ struct device *device,
+ char *fmt, ...)
+ __attribute__((format(printf,5,6)));
extern void class_device_destroy(struct class *cls, dev_t devt);
+/* interface for exporting device attributes */
+struct device_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+ char *buf);
+ ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
+};
+
+#define DEVICE_ATTR(_name,_mode,_show,_store) \
+struct device_attribute dev_attr_##_name = __ATTR(_name,_mode,_show,_store)
+
+extern int device_create_file(struct device *device, struct device_attribute * entry);
+extern void device_remove_file(struct device * dev, struct device_attribute * attr);
struct device {
struct klist klist_children;
struct klist_node knode_parent; /* node in sibling list */
@@ -275,6 +308,7 @@
struct kobject kobj;
char bus_id[BUS_ID_SIZE]; /* position on parent bus */
+ struct device_attribute uevent_attr;
struct semaphore sem; /* semaphore to synchronize calls to
* its driver.
@@ -343,23 +377,6 @@
extern void driver_attach(struct device_driver * drv);
-/* driverfs interface for exporting device attributes */
-
-struct device_attribute {
- struct attribute attr;
- ssize_t (*show)(struct device *dev, struct device_attribute *attr,
- char *buf);
- ssize_t (*store)(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count);
-};
-
-#define DEVICE_ATTR(_name,_mode,_show,_store) \
-struct device_attribute dev_attr_##_name = __ATTR(_name,_mode,_show,_store)
-
-
-extern int device_create_file(struct device *device, struct device_attribute * entry);
-extern void device_remove_file(struct device * dev, struct device_attribute * attr);
-
/*
* Platform "fixup" functions - allow the platform to have their say
* about devices and actions that the general device layer doesn't
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index ed1440e..d2c390e 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -269,6 +269,8 @@
int ethtool_op_set_tso(struct net_device *dev, u32 data);
int ethtool_op_get_perm_addr(struct net_device *dev,
struct ethtool_perm_addr *addr, u8 *data);
+u32 ethtool_op_get_ufo(struct net_device *dev);
+int ethtool_op_set_ufo(struct net_device *dev, u32 data);
/**
* ðtool_ops - Alter and report network device settings
@@ -298,6 +300,8 @@
* set_sg: Turn scatter-gather on or off
* get_tso: Report whether TCP segmentation offload is enabled
* set_tso: Turn TCP segmentation offload on or off
+ * get_ufo: Report whether UDP fragmentation offload is enabled
+ * set_ufo: Turn UDP fragmentation offload on or off
* self_test: Run specified self-tests
* get_strings: Return a set of strings that describe the requested objects
* phys_id: Identify the device
@@ -364,6 +368,8 @@
int (*get_perm_addr)(struct net_device *, struct ethtool_perm_addr *, u8 *);
int (*begin)(struct net_device *);
void (*complete)(struct net_device *);
+ u32 (*get_ufo)(struct net_device *);
+ int (*set_ufo)(struct net_device *, u32);
};
/* CMDs currently supported */
@@ -400,6 +406,8 @@
#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 142e1c1..eabdb5c 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -132,6 +132,7 @@
struct disk_attribute {
struct attribute attr;
ssize_t (*show)(struct gendisk *, char *);
+ ssize_t (*store)(struct gendisk *, const char *, size_t);
};
/*
diff --git a/include/linux/hil.h b/include/linux/hil.h
new file mode 100644
index 0000000..13352d7
--- /dev/null
+++ b/include/linux/hil.h
@@ -0,0 +1,483 @@
+#ifndef _HIL_H_
+#define _HIL_H_
+
+/*
+ * Hewlett Packard Human Interface Loop (HP-HIL) Protocol -- header.
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A
+ *
+ * A note of thanks to HP for providing and shipping reference materials
+ * free of charge to help in the development of HIL support for Linux.
+ *
+ */
+
+#include <asm/types.h>
+
+/* Physical constants relevant to raw loop/device timing.
+ */
+
+#define HIL_CLOCK 8MHZ
+#define HIL_EK1_CLOCK 30HZ
+#define HIL_EK2_CLOCK 60HZ
+
+#define HIL_TIMEOUT_DEV 5 /* ms */
+#define HIL_TIMEOUT_DEVS 10 /* ms */
+#define HIL_TIMEOUT_NORESP 10 /* ms */
+#define HIL_TIMEOUT_DEVS_DATA 16 /* ms */
+#define HIL_TIMEOUT_SELFTEST 200 /* ms */
+
+
+/* Actual wire line coding. These will only be useful if someone is
+ * implementing a software MLC to run HIL devices on a non-parisc machine.
+ */
+
+#define HIL_WIRE_PACKET_LEN 15
+enum hil_wire_bitpos {
+ HIL_WIRE_START = 0,
+ HIL_WIRE_ADDR2,
+ HIL_WIRE_ADDR1,
+ HIL_WIRE_ADDR0,
+ HIL_WIRE_COMMAND,
+ HIL_WIRE_DATA7,
+ HIL_WIRE_DATA6,
+ HIL_WIRE_DATA5,
+ HIL_WIRE_DATA4,
+ HIL_WIRE_DATA3,
+ HIL_WIRE_DATA2,
+ HIL_WIRE_DATA1,
+ HIL_WIRE_DATA0,
+ HIL_WIRE_PARITY,
+ HIL_WIRE_STOP
+};
+
+/* HP documentation uses these bit positions to refer to commands;
+ * we will call these "packets".
+ */
+enum hil_pkt_bitpos {
+ HIL_PKT_CMD = 0x00000800,
+ HIL_PKT_ADDR2 = 0x00000400,
+ HIL_PKT_ADDR1 = 0x00000200,
+ HIL_PKT_ADDR0 = 0x00000100,
+ HIL_PKT_ADDR_MASK = 0x00000700,
+ HIL_PKT_ADDR_SHIFT = 8,
+ HIL_PKT_DATA7 = 0x00000080,
+ HIL_PKT_DATA6 = 0x00000040,
+ HIL_PKT_DATA5 = 0x00000020,
+ HIL_PKT_DATA4 = 0x00000010,
+ HIL_PKT_DATA3 = 0x00000008,
+ HIL_PKT_DATA2 = 0x00000004,
+ HIL_PKT_DATA1 = 0x00000002,
+ HIL_PKT_DATA0 = 0x00000001,
+ HIL_PKT_DATA_MASK = 0x000000FF,
+ HIL_PKT_DATA_SHIFT = 0
+};
+
+/* The HIL MLC also has several error/status/control bits. We extend the
+ * "packet" to include these when direct access to the MLC is available,
+ * or emulate them in cases where they are not available.
+ *
+ * This way the device driver knows that the underlying MLC driver
+ * has had to deal with loop errors.
+ */
+enum hil_error_bitpos {
+ HIL_ERR_OB = 0x00000800, /* MLC is busy sending an auto-poll,
+ or we have filled up the output
+ buffer and must wait. */
+ HIL_ERR_INT = 0x00010000, /* A normal interrupt has occurred. */
+ HIL_ERR_NMI = 0x00020000, /* An NMI has occurred. */
+ HIL_ERR_LERR = 0x00040000, /* A poll didn't come back. */
+ HIL_ERR_PERR = 0x01000000, /* There was a Parity Error. */
+ HIL_ERR_FERR = 0x02000000, /* There was a Framing Error. */
+ HIL_ERR_FOF = 0x04000000 /* Input FIFO Overflowed. */
+};
+
+enum hil_control_bitpos {
+ HIL_CTRL_TEST = 0x00010000,
+ HIL_CTRL_IPF = 0x00040000,
+ HIL_CTRL_APE = 0x02000000
+};
+
+/* Bits 30,31 are unused, we use them to control write behavior. */
+#define HIL_DO_ALTER_CTRL 0x40000000 /* Write MSW of packet to control
+ before writing LSW to loop */
+#define HIL_CTRL_ONLY 0xc0000000 /* *Only* alter the control registers */
+
+/* This gives us a 32-bit "packet"
+ */
+typedef u32 hil_packet;
+
+
+/* HIL Loop commands
+ */
+enum hil_command {
+ HIL_CMD_IFC = 0x00, /* Interface Clear */
+ HIL_CMD_EPT = 0x01, /* Enter Pass-Thru Mode */
+ HIL_CMD_ELB = 0x02, /* Enter Loop-Back Mode */
+ HIL_CMD_IDD = 0x03, /* Identify and Describe */
+ HIL_CMD_DSR = 0x04, /* Device Soft Reset */
+ HIL_CMD_PST = 0x05, /* Perform Self Test */
+ HIL_CMD_RRG = 0x06, /* Read Register */
+ HIL_CMD_WRG = 0x07, /* Write Register */
+ HIL_CMD_ACF = 0x08, /* Auto Configure */
+ HIL_CMDID_ACF = 0x07, /* Auto Configure bits with incremented ID */
+ HIL_CMD_POL = 0x10, /* Poll */
+ HIL_CMDCT_POL = 0x0f, /* Poll command bits with item count */
+ HIL_CMD_RPL = 0x20, /* RePoll */
+ HIL_CMDCT_RPL = 0x0f, /* RePoll command bits with item count */
+ HIL_CMD_RNM = 0x30, /* Report Name */
+ HIL_CMD_RST = 0x31, /* Report Status */
+ HIL_CMD_EXD = 0x32, /* Extended Describe */
+ HIL_CMD_RSC = 0x33, /* Report Security Code */
+
+ /* 0x34 to 0x3c reserved for future use */
+
+ HIL_CMD_DKA = 0x3d, /* Disable Keyswitch Autorepeat */
+ HIL_CMD_EK1 = 0x3e, /* Enable Keyswitch Autorepeat 1 */
+ HIL_CMD_EK2 = 0x3f, /* Enable Keyswitch Autorepeat 2 */
+ HIL_CMD_PR1 = 0x40, /* Prompt1 */
+ HIL_CMD_PR2 = 0x41, /* Prompt2 */
+ HIL_CMD_PR3 = 0x42, /* Prompt3 */
+ HIL_CMD_PR4 = 0x43, /* Prompt4 */
+ HIL_CMD_PR5 = 0x44, /* Prompt5 */
+ HIL_CMD_PR6 = 0x45, /* Prompt6 */
+ HIL_CMD_PR7 = 0x46, /* Prompt7 */
+ HIL_CMD_PRM = 0x47, /* Prompt (General Purpose) */
+ HIL_CMD_AK1 = 0x48, /* Acknowlege1 */
+ HIL_CMD_AK2 = 0x49, /* Acknowlege2 */
+ HIL_CMD_AK3 = 0x4a, /* Acknowlege3 */
+ HIL_CMD_AK4 = 0x4b, /* Acknowlege4 */
+ HIL_CMD_AK5 = 0x4c, /* Acknowlege5 */
+ HIL_CMD_AK6 = 0x4d, /* Acknowlege6 */
+ HIL_CMD_AK7 = 0x4e, /* Acknowlege7 */
+ HIL_CMD_ACK = 0x4f, /* Acknowlege (General Purpose) */
+
+ /* 0x50 to 0x78 reserved for future use */
+ /* 0x80 to 0xEF device-specific commands */
+ /* 0xf0 to 0xf9 reserved for future use */
+
+ HIL_CMD_RIO = 0xfa, /* Register I/O Error */
+ HIL_CMD_SHR = 0xfb, /* System Hard Reset */
+ HIL_CMD_TER = 0xfc, /* Transmission Error */
+ HIL_CMD_CAE = 0xfd, /* Configuration Address Error */
+ HIL_CMD_DHR = 0xfe, /* Device Hard Reset */
+
+ /* 0xff is prohibited from use. */
+};
+
+
+/*
+ * Response "records" to HIL commands
+ */
+
+/* Device ID byte
+ */
+#define HIL_IDD_DID_TYPE_MASK 0xe0 /* Primary type bits */
+#define HIL_IDD_DID_TYPE_KB_INTEGRAL 0xa0 /* Integral keyboard */
+#define HIL_IDD_DID_TYPE_KB_ITF 0xc0 /* ITD keyboard */
+#define HIL_IDD_DID_TYPE_KB_RSVD 0xe0 /* Reserved keyboard type */
+#define HIL_IDD_DID_TYPE_KB_LANG_MASK 0x1f /* Keyboard locale bits */
+#define HIL_IDD_DID_KBLANG_USE_ESD 0x00 /* Use ESD Locale instead */
+#define HIL_IDD_DID_TYPE_ABS 0x80 /* Absolute Positioners */
+#define HIL_IDD_DID_ABS_RSVD1_MASK 0xf8 /* Reserved */
+#define HIL_IDD_DID_ABS_RSVD1 0x98
+#define HIL_IDD_DID_ABS_TABLET_MASK 0xf8 /* Tablets and digitizers */
+#define HIL_IDD_DID_ABS_TABLET 0x90
+#define HIL_IDD_DID_ABS_TSCREEN_MASK 0xfc /* Touch screens */
+#define HIL_IDD_DID_ABS_TSCREEN 0x8c
+#define HIL_IDD_DID_ABS_RSVD2_MASK 0xfc /* Reserved */
+#define HIL_IDD_DID_ABS_RSVD2 0x88
+#define HIL_IDD_DID_ABS_RSVD3_MASK 0xfc /* Reserved */
+#define HIL_IDD_DID_ABS_RSVD3 0x80
+#define HIL_IDD_DID_TYPE_REL 0x60 /* Relative Positioners */
+#define HIL_IDD_DID_REL_RSVD1_MASK 0xf0 /* Reserved */
+#define HIL_IDD_DID_REL_RSVD1 0x70
+#define HIL_IDD_DID_REL_RSVD2_MASK 0xfc /* Reserved */
+#define HIL_IDD_DID_REL_RSVD2 0x6c
+#define HIL_IDD_DID_REL_MOUSE_MASK 0xfc /* Mouse */
+#define HIL_IDD_DID_REL_MOUSE 0x68
+#define HIL_IDD_DID_REL_QUAD_MASK 0xf8 /* Other Quadrature Devices */
+#define HIL_IDD_DID_REL_QUAD 0x60
+#define HIL_IDD_DID_TYPE_CHAR 0x40 /* Character Entry */
+#define HIL_IDD_DID_CHAR_BARCODE_MASK 0xfc /* Barcode Reader */
+#define HIL_IDD_DID_CHAR_BARCODE 0x5c
+#define HIL_IDD_DID_CHAR_RSVD1_MASK 0xfc /* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD1 0x58
+#define HIL_IDD_DID_CHAR_RSVD2_MASK 0xf8 /* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD2 0x50
+#define HIL_IDD_DID_CHAR_RSVD3_MASK 0xf0 /* Reserved */
+#define HIL_IDD_DID_CHAR_RSVD3 0x40
+#define HIL_IDD_DID_TYPE_OTHER 0x20 /* Miscellaneous */
+#define HIL_IDD_DID_OTHER_RSVD1_MASK 0xf0 /* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD1 0x30
+#define HIL_IDD_DID_OTHER_BARCODE_MASK 0xfc /* Tone Generator */
+#define HIL_IDD_DID_OTHER_BARCODE 0x2c
+#define HIL_IDD_DID_OTHER_RSVD2_MASK 0xfc /* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD2 0x28
+#define HIL_IDD_DID_OTHER_RSVD3_MASK 0xf8 /* Reserved */
+#define HIL_IDD_DID_OTHER_RSVD3 0x20
+#define HIL_IDD_DID_TYPE_KEYPAD 0x00 /* Vectra Keyboard */
+
+/* IDD record header
+ */
+#define HIL_IDD_HEADER_AXSET_MASK 0x03 /* Number of axis in a set */
+#define HIL_IDD_HEADER_RSC 0x04 /* Supports RSC command */
+#define HIL_IDD_HEADER_EXD 0x08 /* Supports EXD command */
+#define HIL_IDD_HEADER_IOD 0x10 /* IOD byte to follow */
+#define HIL_IDD_HEADER_16BIT 0x20 /* 16 (vs. 8) bit resolution */
+#define HIL_IDD_HEADER_ABS 0x40 /* Reports Absolute Position */
+#define HIL_IDD_HEADER_2X_AXIS 0x80 /* Two sets of 1-3 axis */
+
+/* I/O Descriptor
+ */
+#define HIL_IDD_IOD_NBUTTON_MASK 0x07 /* Number of buttons */
+#define HIL_IDD_IOD_PROXIMITY 0x08 /* Proximity in/out events */
+#define HIL_IDD_IOD_PROMPT_MASK 0x70 /* Number of prompts/acks */
+#define HIL_IDD_IOD_PROMPT_SHIFT 4
+#define HIL_IDD_IOD_PROMPT 0x80 /* Generic prompt/ack */
+
+#define HIL_IDD_NUM_AXES_PER_SET(header_packet) \
+((header_packet) & HIL_IDD_HEADER_AXSET_MASK)
+
+#define HIL_IDD_NUM_AXSETS(header_packet) \
+(2 - !((header_packet) & HIL_IDD_HEADER_2X_AXIS))
+
+#define HIL_IDD_LEN(header_packet) \
+((4 - !(header_packet & HIL_IDD_HEADER_IOD) - \
+ 2 * !(HIL_IDD_NUM_AXES_PER_SET(header_packet))) + \
+ 2 * HIL_IDD_NUM_AXES_PER_SET(header_packet) * \
+ !!((header_packet) & HIL_IDD_HEADER_ABS))
+
+/* The following HIL_IDD_* macros assume you have an array of
+ * packets and/or unpacked 8-bit data in the order that they
+ * were received.
+ */
+
+#define HIL_IDD_AXIS_COUNTS_PER_M(header_ptr) \
+(!(HIL_IDD_NUM_AXSETS(*(header_ptr))) ? -1 : \
+(((*(header_ptr + 1) & HIL_PKT_DATA_MASK) + \
+ ((*(header_ptr + 2) & HIL_PKT_DATA_MASK)) << 8) \
+* ((*(header_ptr) & HIL_IDD_HEADER_16BIT) ? 100 : 1)))
+
+#define HIL_IDD_AXIS_MAX(header_ptr, __axnum) \
+((!(*(header_ptr) & HIL_IDD_HEADER_ABS) || \
+ (HIL_IDD_NUM_AXES_PER_SET(*(header_ptr)) <= __axnum)) ? 0 : \
+ ((HIL_PKT_DATA_MASK & *((header_ptr) + 3 + 2 * __axnum)) + \
+ ((HIL_PKT_DATA_MASK & *((header_ptr) + 4 + 2 * __axnum)) << 8)))
+
+#define HIL_IDD_IOD(header_ptr) \
+(*(header_ptr + HIL_IDD_LEN((*header_ptr)) - 1))
+
+#define HIL_IDD_HAS_GEN_PROMPT(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) && \
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROMPT))
+
+#define HIL_IDD_HAS_GEN_PROXIMITY(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) && \
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_PROXIMITY))
+
+#define HIL_IDD_NUM_BUTTONS(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) ? \
+ (HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NBUTTON_MASK) : 0)
+
+#define HIL_IDD_NUM_PROMPTS(header_ptr) \
+((*header_ptr & HIL_IDD_HEADER_IOD) ? \
+ ((HIL_IDD_IOD(header_ptr) & HIL_IDD_IOD_NPROMPT_MASK) \
+ >> HIL_IDD_IOD_PROMPT_SHIFT) : 0)
+
+/* The response to HIL EXD commands -- the "extended describe record" */
+#define HIL_EXD_HEADER_WRG 0x03 /* Supports type2 WRG */
+#define HIL_EXD_HEADER_WRG_TYPE1 0x01 /* Supports type1 WRG */
+#define HIL_EXD_HEADER_WRG_TYPE2 0x02 /* Supports type2 WRG */
+#define HIL_EXD_HEADER_RRG 0x04 /* Supports RRG command */
+#define HIL_EXD_HEADER_RNM 0x10 /* Supports RNM command */
+#define HIL_EXD_HEADER_RST 0x20 /* Supports RST command */
+#define HIL_EXD_HEADER_LOCALE 0x40 /* Contains locale code */
+
+#define HIL_EXD_NUM_RRG(header_ptr) \
+((*header_ptr & HIL_EXD_HEADER_RRG) ? \
+ (*(header_ptr + 1) & HIL_PKT_DATA_MASK) : 0)
+
+#define HIL_EXD_NUM_WWG(header_ptr) \
+((*header_ptr & HIL_EXD_HEADER_WRG) ? \
+ (*(header_ptr + 2 - !(*header_ptr & HIL_EXD_HEADER_RRG)) & \
+ HIL_PKT_DATA_MASK) : 0)
+
+#define HIL_EXD_LEN(header_ptr) \
+(!!(*header_ptr & HIL_EXD_HEADER_RRG) + \
+ !!(*header_ptr & HIL_EXD_HEADER_WRG) + \
+ !!(*header_ptr & HIL_EXD_HEADER_LOCALE) + \
+ 2 * !!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) + 1)
+
+#define HIL_EXD_LOCALE(header_ptr) \
+(!(*header_ptr & HIL_EXD_HEADER_LOCALE) ? -1 : \
+ (*(header_ptr + HIL_EXD_LEN(header_ptr) - 1) & HIL_PKT_DATA_MASK))
+
+#define HIL_EXD_WRG_TYPE2_LEN(header_ptr) \
+(!(*header_ptr & HIL_EXD_HEADER_WRG_TYPE2) ? -1 : \
+ (*(header_ptr + HIL_EXD_LEN(header_ptr) - 2 - \
+ !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) + \
+ ((*(header_ptr + HIL_EXD_LEN(header_ptr) - 1 - \
+ !!(*header_ptr & HIL_EXD_HEADER_LOCALE)) & HIL_PKT_DATA_MASK) << 8))
+
+/* Device locale codes. */
+
+/* Last defined locale code. Everything above this is "Reserved",
+ and note that this same table applies to the Device ID Byte where
+ keyboards may have a nationality code which is only 5 bits. */
+#define HIL_LOCALE_MAX 0x1f
+
+/* Map to hopefully useful strings. I was trying to make these look
+ like locale.aliases strings do; maybe that isn't the right table to
+ emulate. In either case, I didn't have much to work on. */
+#define HIL_LOCALE_MAP \
+"", /* 0x00 Reserved */ \
+"", /* 0x01 Reserved */ \
+"", /* 0x02 Reserved */ \
+"swiss.french", /* 0x03 Swiss/French */ \
+"portuguese", /* 0x04 Portuguese */ \
+"arabic", /* 0x05 Arabic */ \
+"hebrew", /* 0x06 Hebrew */ \
+"english.canadian", /* 0x07 Canadian English */ \
+"turkish", /* 0x08 Turkish */ \
+"greek", /* 0x09 Greek */ \
+"thai", /* 0x0a Thai (Thailand) */ \
+"italian", /* 0x0b Italian */ \
+"korean", /* 0x0c Hangul (Korea) */ \
+"dutch", /* 0x0d Dutch */ \
+"swedish", /* 0x0e Swedish */ \
+"german", /* 0x0f German */ \
+"chinese", /* 0x10 Chinese-PRC */ \
+"chinese", /* 0x11 Chinese-ROC */ \
+"swiss.french", /* 0x12 Swiss/French II */ \
+"spanish", /* 0x13 Spanish */ \
+"swiss.german", /* 0x14 Swiss/German II */ \
+"flemish", /* 0x15 Belgian (Flemish) */ \
+"finnish", /* 0x16 Finnish */ \
+"english.uk", /* 0x17 United Kingdom */ \
+"french.canadian", /* 0x18 French/Canadian */ \
+"swiss.german", /* 0x19 Swiss/German */ \
+"norwegian", /* 0x1a Norwegian */ \
+"french", /* 0x1b French */ \
+"danish", /* 0x1c Danish */ \
+"japanese", /* 0x1d Katakana */ \
+"spanish", /* 0x1e Latin American/Spanish*/\
+"english.us" /* 0x1f United States */ \
+
+
+/* HIL keycodes */
+#define HIL_KEYCODES_SET1_TBLSIZE 128
+#define HIL_KEYCODES_SET1 \
+ KEY_5, KEY_RESERVED, KEY_RIGHTALT, KEY_LEFTALT, \
+ KEY_RIGHTSHIFT, KEY_LEFTSHIFT, KEY_LEFTCTRL, KEY_SYSRQ, \
+ KEY_KP4, KEY_KP8, KEY_KP5, KEY_KP9, \
+ KEY_KP6, KEY_KP7, KEY_KPCOMMA, KEY_KPENTER, \
+ KEY_KP1, KEY_KPSLASH, KEY_KP2, KEY_KPPLUS, \
+ KEY_KP3, KEY_KPASTERISK, KEY_KP0, KEY_KPMINUS, \
+ KEY_B, KEY_V, KEY_C, KEY_X, \
+ KEY_Z, KEY_RESERVED, KEY_RESERVED, KEY_ESC, \
+ KEY_6, KEY_F10, KEY_3, KEY_F11, \
+ KEY_KPDOT, KEY_F9, KEY_TAB /*KP*/, KEY_F12, \
+ KEY_H, KEY_G, KEY_F, KEY_D, \
+ KEY_S, KEY_A, KEY_RESERVED, KEY_CAPSLOCK, \
+ KEY_U, KEY_Y, KEY_T, KEY_R, \
+ KEY_E, KEY_W, KEY_Q, KEY_TAB, \
+ KEY_7, KEY_6, KEY_5, KEY_4, \
+ KEY_3, KEY_2, KEY_1, KEY_GRAVE, \
+ KEY_F13, KEY_F14, KEY_F15, KEY_F16, \
+ KEY_F17, KEY_F18, KEY_F19, KEY_F20, \
+ KEY_MENU, KEY_F4, KEY_F3, KEY_F2, \
+ KEY_F1, KEY_VOLUMEUP, KEY_STOP, KEY_SENDFILE, \
+ KEY_SYSRQ, KEY_F5, KEY_F6, KEY_F7, \
+ KEY_F8, KEY_VOLUMEDOWN, KEY_DEL_EOL, KEY_DEL_EOS, \
+ KEY_8, KEY_9, KEY_0, KEY_MINUS, \
+ KEY_EQUAL, KEY_BACKSPACE, KEY_INS_LINE, KEY_DEL_LINE, \
+ KEY_I, KEY_O, KEY_P, KEY_LEFTBRACE, \
+ KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_INSERT, KEY_DELETE, \
+ KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \
+ KEY_APOSTROPHE, KEY_ENTER, KEY_HOME, KEY_PAGEUP, \
+ KEY_M, KEY_COMMA, KEY_DOT, KEY_SLASH, \
+ KEY_BACKSLASH, KEY_SELECT, KEY_102ND, KEY_PAGEDOWN, \
+ KEY_N, KEY_SPACE, KEY_NEXT, KEY_RESERVED, \
+ KEY_LEFT, KEY_DOWN, KEY_UP, KEY_RIGHT
+
+
+#define HIL_KEYCODES_SET3_TBLSIZE 128
+#define HIL_KEYCODES_SET3 \
+ KEY_RESERVED, KEY_ESC, KEY_1, KEY_2, \
+ KEY_3, KEY_4, KEY_5, KEY_6, \
+ KEY_7, KEY_8, KEY_9, KEY_0, \
+ KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, KEY_TAB, \
+ KEY_Q, KEY_W, KEY_E, KEY_R, \
+ KEY_T, KEY_Y, KEY_U, KEY_I, \
+ KEY_O, KEY_P, KEY_LEFTBRACE, KEY_RIGHTBRACE, \
+ KEY_ENTER, KEY_LEFTCTRL, KEY_A, KEY_S, \
+ KEY_D, KEY_F, KEY_G, KEY_H, \
+ KEY_J, KEY_K, KEY_L, KEY_SEMICOLON, \
+ KEY_APOSTROPHE,KEY_GRAVE, KEY_LEFTSHIFT, KEY_BACKSLASH, \
+ KEY_Z, KEY_X, KEY_C, KEY_V, \
+ KEY_B, KEY_N, KEY_M, KEY_COMMA, \
+ KEY_DOT, KEY_SLASH, KEY_RIGHTSHIFT, KEY_KPASTERISK, \
+ KEY_LEFTALT, KEY_SPACE, KEY_CAPSLOCK, KEY_F1, \
+ KEY_F2, KEY_F3, KEY_F4, KEY_F5, \
+ KEY_F6, KEY_F7, KEY_F8, KEY_F9, \
+ KEY_F10, KEY_NUMLOCK, KEY_SCROLLLOCK, KEY_KP7, \
+ KEY_KP8, KEY_KP9, KEY_KPMINUS, KEY_KP4, \
+ KEY_KP5, KEY_KP6, KEY_KPPLUS, KEY_KP1, \
+ KEY_KP2, KEY_KP3, KEY_KP0, KEY_KPDOT, \
+ KEY_SYSRQ, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \
+ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \
+ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \
+ KEY_UP, KEY_LEFT, KEY_DOWN, KEY_RIGHT, \
+ KEY_HOME, KEY_PAGEUP, KEY_END, KEY_PAGEDOWN, \
+ KEY_INSERT, KEY_DELETE, KEY_102ND, KEY_RESERVED, \
+ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \
+ KEY_F1, KEY_F2, KEY_F3, KEY_F4, \
+ KEY_F5, KEY_F6, KEY_F7, KEY_F8, \
+ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, \
+ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED
+
+
+/* Response to POL command, the "poll record header" */
+
+#define HIL_POL_NUM_AXES_MASK 0x03 /* Number of axis reported */
+#define HIL_POL_CTS 0x04 /* Device ready to receive data */
+#define HIL_POL_STATUS_PENDING 0x08 /* Device has status to report */
+#define HIL_POL_CHARTYPE_MASK 0x70 /* Type of character data to follow */
+#define HIL_POL_CHARTYPE_NONE 0x00 /* No character data to follow */
+#define HIL_POL_CHARTYPE_RSVD1 0x10 /* Reserved Set 1 */
+#define HIL_POL_CHARTYPE_ASCII 0x20 /* U.S. ASCII */
+#define HIL_POL_CHARTYPE_BINARY 0x30 /* Binary data */
+#define HIL_POL_CHARTYPE_SET1 0x40 /* Keycode Set 1 */
+#define HIL_POL_CHARTYPE_RSVD2 0x50 /* Reserved Set 2 */
+#define HIL_POL_CHARTYPE_SET2 0x60 /* Keycode Set 2 */
+#define HIL_POL_CHARTYPE_SET3 0x70 /* Keycode Set 3 */
+#define HIL_POL_AXIS_ALT 0x80 /* Data is from axis set 2 */
+
+
+#endif /* _HIL_H_ */
diff --git a/include/linux/hil_mlc.h b/include/linux/hil_mlc.h
new file mode 100644
index 0000000..8df29ca
--- /dev/null
+++ b/include/linux/hil_mlc.h
@@ -0,0 +1,168 @@
+/*
+ * HP Human Interface Loop Master Link Controller driver.
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A
+ *
+ */
+
+#include <linux/hil.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <asm/semaphore.h>
+#include <linux/serio.h>
+#include <linux/list.h>
+
+typedef struct hil_mlc hil_mlc;
+
+/* The HIL has a complicated state engine.
+ * We define the structure of nodes in the state engine here.
+ */
+enum hilse_act {
+ /* HILSE_OUT prepares to receive input if the next node
+ * is an IN or EXPECT, and then sends the given packet.
+ */
+ HILSE_OUT = 0,
+
+ /* HILSE_CTS checks if the loop is busy. */
+ HILSE_CTS,
+
+ /* HILSE_OUT_LAST sends the given command packet to
+ * the last configured/running device on the loop.
+ */
+ HILSE_OUT_LAST,
+
+ /* HILSE_OUT_DISC sends the given command packet to
+ * the next device past the last configured/running one.
+ */
+ HILSE_OUT_DISC,
+
+ /* HILSE_FUNC runs a callback function with given arguments.
+ * a positive return value causes the "ugly" branch to be taken.
+ */
+ HILSE_FUNC,
+
+ /* HILSE_IN simply expects any non-errored packet to arrive
+ * within arg usecs.
+ */
+ HILSE_IN = 0x100,
+
+ /* HILSE_EXPECT expects a particular packet to arrive
+ * within arg usecs, any other packet is considered an error.
+ */
+ HILSE_EXPECT,
+
+ /* HILSE_EXPECT_LAST as above but dev field should be last
+ * discovered/operational device.
+ */
+ HILSE_EXPECT_LAST,
+
+ /* HILSE_EXPECT_LAST as above but dev field should be first
+ * undiscovered/inoperational device.
+ */
+ HILSE_EXPECT_DISC
+};
+
+typedef int (hilse_func) (hil_mlc *mlc, int arg);
+struct hilse_node {
+ enum hilse_act act; /* How to process this node */
+ union {
+ hilse_func *func; /* Function to call if HILSE_FUNC */
+ hil_packet packet; /* Packet to send or to compare */
+ } object;
+ int arg; /* Timeout in usec or parm for func */
+ int good; /* Node to jump to on success */
+ int bad; /* Node to jump to on error */
+ int ugly; /* Node to jump to on timeout */
+};
+
+/* Methods for back-end drivers, e.g. hp_sdc_mlc */
+typedef int (hil_mlc_cts) (hil_mlc *mlc);
+typedef void (hil_mlc_out) (hil_mlc *mlc);
+typedef int (hil_mlc_in) (hil_mlc *mlc, suseconds_t timeout);
+
+struct hil_mlc_devinfo {
+ uint8_t idd[16]; /* Device ID Byte and Describe Record */
+ uint8_t rsc[16]; /* Security Code Header and Record */
+ uint8_t exd[16]; /* Extended Describe Record */
+ uint8_t rnm[16]; /* Device name as returned by RNM command */
+};
+
+struct hil_mlc_serio_map {
+ hil_mlc *mlc;
+ int di_revmap;
+ int didx;
+};
+
+/* How many (possibly old/detached) devices the we try to keep track of */
+#define HIL_MLC_DEVMEM 16
+
+struct hil_mlc {
+ struct list_head list; /* hil_mlc is organized as linked list */
+
+ rwlock_t lock;
+
+ void *priv; /* Data specific to a particular type of MLC */
+
+ int seidx; /* Current node in state engine */
+ int istarted, ostarted;
+
+ hil_mlc_cts *cts;
+ struct semaphore csem; /* Raised when loop idle */
+
+ hil_mlc_out *out;
+ struct semaphore osem; /* Raised when outpacket dispatched */
+ hil_packet opacket;
+
+ hil_mlc_in *in;
+ struct semaphore isem; /* Raised when a packet arrives */
+ hil_packet ipacket[16];
+ hil_packet imatch;
+ int icount;
+ struct timeval instart;
+ suseconds_t intimeout;
+
+ int ddi; /* Last operational device id */
+ int lcv; /* LCV to throttle loops */
+ struct timeval lcv_tv; /* Time loop was started */
+
+ int di_map[7]; /* Maps below items to live devs */
+ struct hil_mlc_devinfo di[HIL_MLC_DEVMEM];
+ struct serio *serio[HIL_MLC_DEVMEM];
+ struct hil_mlc_serio_map serio_map[HIL_MLC_DEVMEM];
+ hil_packet serio_opacket[HIL_MLC_DEVMEM];
+ int serio_oidx[HIL_MLC_DEVMEM];
+ struct hil_mlc_devinfo di_scratch; /* Temporary area */
+
+ int opercnt;
+
+ struct tasklet_struct *tasklet;
+};
+
+int hil_mlc_register(hil_mlc *mlc);
+int hil_mlc_unregister(hil_mlc *mlc);
diff --git a/include/linux/hp_sdc.h b/include/linux/hp_sdc.h
new file mode 100644
index 0000000..debd715
--- /dev/null
+++ b/include/linux/hp_sdc.h
@@ -0,0 +1,300 @@
+/*
+ * HP i8042 System Device Controller -- header
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ *
+ * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A
+ *
+ * System Device Controller Microprocessor Firmware Theory of Operation
+ * for Part Number 1820-4784 Revision B. Dwg No. A-1820-4784-2
+ *
+ */
+
+#ifndef _LINUX_HP_SDC_H
+#define _LINUX_HP_SDC_H
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#if defined(__hppa__)
+#include <asm/hardware.h>
+#endif
+
+
+/* No 4X status reads take longer than this (in usec).
+ */
+#define HP_SDC_MAX_REG_DELAY 20000
+
+typedef void (hp_sdc_irqhook) (int irq, void *dev_id,
+ uint8_t status, uint8_t data);
+
+int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback);
+int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback);
+int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback);
+int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback);
+
+typedef struct {
+ int actidx; /* Start of act. Acts are atomic WRT I/O to SDC */
+ int idx; /* Index within the act */
+ int endidx; /* transaction is over and done if idx == endidx */
+ uint8_t *seq; /* commands/data for the transaction */
+ union {
+ hp_sdc_irqhook *irqhook; /* Callback, isr or tasklet context */
+ struct semaphore *semaphore; /* Semaphore to sleep on. */
+ } act;
+} hp_sdc_transaction;
+int hp_sdc_enqueue_transaction(hp_sdc_transaction *this);
+int hp_sdc_dequeue_transaction(hp_sdc_transaction *this);
+
+/* The HP_SDC_ACT* values are peculiar to this driver.
+ * Nuance: never HP_SDC_ACT_DATAIN | HP_SDC_ACT_DEALLOC, use another
+ * act to perform the dealloc.
+ */
+#define HP_SDC_ACT_PRECMD 0x01 /* Send a command first */
+#define HP_SDC_ACT_DATAREG 0x02 /* Set data registers */
+#define HP_SDC_ACT_DATAOUT 0x04 /* Send data bytes */
+#define HP_SDC_ACT_POSTCMD 0x08 /* Send command after */
+#define HP_SDC_ACT_DATAIN 0x10 /* Collect data after */
+#define HP_SDC_ACT_DURING 0x1f
+#define HP_SDC_ACT_SEMAPHORE 0x20 /* Raise semaphore after */
+#define HP_SDC_ACT_CALLBACK 0x40 /* Pass data to IRQ handler */
+#define HP_SDC_ACT_DEALLOC 0x80 /* Destroy transaction after */
+#define HP_SDC_ACT_AFTER 0xe0
+#define HP_SDC_ACT_DEAD 0x60 /* Act timed out. */
+
+/* Rest of the flags are straightforward representation of the SDC interface */
+#define HP_SDC_STATUS_IBF 0x02 /* Input buffer full */
+
+#define HP_SDC_STATUS_IRQMASK 0xf0 /* Bits containing "level 1" irq */
+#define HP_SDC_STATUS_PERIODIC 0x10 /* Periodic 10ms timer */
+#define HP_SDC_STATUS_USERTIMER 0x20 /* "Special purpose" timer */
+#define HP_SDC_STATUS_TIMER 0x30 /* Both PERIODIC and USERTIMER */
+#define HP_SDC_STATUS_REG 0x40 /* Data from an i8042 register */
+#define HP_SDC_STATUS_HILCMD 0x50 /* Command from HIL MLC */
+#define HP_SDC_STATUS_HILDATA 0x60 /* Data from HIL MLC */
+#define HP_SDC_STATUS_PUP 0x70 /* Sucessful power-up self test */
+#define HP_SDC_STATUS_KCOOKED 0x80 /* Key from cooked kbd */
+#define HP_SDC_STATUS_KRPG 0xc0 /* Key from Repeat Gen */
+#define HP_SDC_STATUS_KMOD_SUP 0x10 /* Shift key is up */
+#define HP_SDC_STATUS_KMOD_CUP 0x20 /* Control key is up */
+
+#define HP_SDC_NMISTATUS_FHS 0x40 /* NMI is a fast handshake irq */
+
+/* Internal i8042 registers (there are more, but they are not too useful). */
+
+#define HP_SDC_USE 0x02 /* Resource usage (including OB bit) */
+#define HP_SDC_IM 0x04 /* Interrupt mask */
+#define HP_SDC_CFG 0x11 /* Configuration register */
+#define HP_SDC_KBLANGUAGE 0x12 /* Keyboard language */
+
+#define HP_SDC_D0 0x70 /* General purpose data buffer 0 */
+#define HP_SDC_D1 0x71 /* General purpose data buffer 1 */
+#define HP_SDC_D2 0x72 /* General purpose data buffer 2 */
+#define HP_SDC_D3 0x73 /* General purpose data buffer 3 */
+#define HP_SDC_VT1 0x74 /* Timer for voice 1 */
+#define HP_SDC_VT2 0x75 /* Timer for voice 2 */
+#define HP_SDC_VT3 0x76 /* Timer for voice 3 */
+#define HP_SDC_VT4 0x77 /* Timer for voice 4 */
+#define HP_SDC_KBN 0x78 /* Which HIL devs are Nimitz */
+#define HP_SDC_KBC 0x79 /* Which HIL devs are cooked kbds */
+#define HP_SDC_LPS 0x7a /* i8042's view of HIL status */
+#define HP_SDC_LPC 0x7b /* i8042's view of HIL "control" */
+#define HP_SDC_RSV 0x7c /* Reserved "for testing" */
+#define HP_SDC_LPR 0x7d /* i8042 count of HIL reconfigs */
+#define HP_SDC_XTD 0x7e /* "Extended Configuration" register */
+#define HP_SDC_STR 0x7f /* i8042 self-test result */
+
+/* Bitfields for above registers */
+#define HP_SDC_USE_LOOP 0x04 /* Command is currently on the loop. */
+
+#define HP_SDC_IM_MASK 0x1f /* these bits not part of cmd/status */
+#define HP_SDC_IM_FH 0x10 /* Mask the fast handshake irq */
+#define HP_SDC_IM_PT 0x08 /* Mask the periodic timer irq */
+#define HP_SDC_IM_TIMERS 0x04 /* Mask the MT/DT/CT irq */
+#define HP_SDC_IM_RESET 0x02 /* Mask the reset key irq */
+#define HP_SDC_IM_HIL 0x01 /* Mask the HIL MLC irq */
+
+#define HP_SDC_CFG_ROLLOVER 0x08 /* WTF is "N-key rollover"? */
+#define HP_SDC_CFG_KBD 0x10 /* There is a keyboard */
+#define HP_SDC_CFG_NEW 0x20 /* Supports/uses HIL MLC */
+#define HP_SDC_CFG_KBD_OLD 0x03 /* keyboard code for non-HIL */
+#define HP_SDC_CFG_KBD_NEW 0x07 /* keyboard code from HIL autoconfig */
+#define HP_SDC_CFG_REV 0x40 /* Code revision bit */
+#define HP_SDC_CFG_IDPROM 0x80 /* IDPROM present in kbd (not HIL) */
+
+#define HP_SDC_LPS_NDEV 0x07 /* # devices autoconfigured on HIL */
+#define HP_SDC_LPS_ACSUCC 0x08 /* loop autoconfigured successfully */
+#define HP_SDC_LPS_ACFAIL 0x80 /* last loop autoconfigure failed */
+
+#define HP_SDC_LPC_APE_IPF 0x01 /* HIL MLC APE/IPF (autopoll) set */
+#define HP_SDC_LPC_ARCONERR 0x02 /* i8042 autoreconfigs loop on err */
+#define HP_SDC_LPC_ARCQUIET 0x03 /* i8042 doesn't report autoreconfigs*/
+#define HP_SDC_LPC_COOK 0x10 /* i8042 cooks devices in _KBN */
+#define HP_SDC_LPC_RC 0x80 /* causes autoreconfig */
+
+#define HP_SDC_XTD_REV 0x07 /* contains revision code */
+#define HP_SDC_XTD_REV_STRINGS(val, str) \
+switch (val) { \
+ case 0x1: str = "1820-3712"; break; \
+ case 0x2: str = "1820-4379"; break; \
+ case 0x3: str = "1820-4784"; break; \
+ default: str = "unknown"; \
+};
+#define HP_SDC_XTD_BEEPER 0x08 /* TI SN76494 beeper available */
+#define HP_SDC_XTD_BBRTC 0x20 /* OKI MSM-58321 BBRTC present */
+
+#define HP_SDC_CMD_LOAD_RT 0x31 /* Load real time (from 8042) */
+#define HP_SDC_CMD_LOAD_FHS 0x36 /* Load the fast handshake timer */
+#define HP_SDC_CMD_LOAD_MT 0x38 /* Load the match timer */
+#define HP_SDC_CMD_LOAD_DT 0x3B /* Load the delay timer */
+#define HP_SDC_CMD_LOAD_CT 0x3E /* Load the cycle timer */
+
+#define HP_SDC_CMD_SET_IM 0x40 /* 010xxxxx == set irq mask */
+
+/* The documents provided do not explicitly state that all registers betweem
+ * 0x01 and 0x1f inclusive can be read by sending their register index as a
+ * command, but this is implied and appears to be the case.
+ */
+#define HP_SDC_CMD_READ_RAM 0x00 /* Load from i8042 RAM (autoinc) */
+#define HP_SDC_CMD_READ_USE 0x02 /* Undocumented! Load from usage reg */
+#define HP_SDC_CMD_READ_IM 0x04 /* Load current interrupt mask */
+#define HP_SDC_CMD_READ_KCC 0x11 /* Load primary kbd config code */
+#define HP_SDC_CMD_READ_KLC 0x12 /* Load primary kbd language code */
+#define HP_SDC_CMD_READ_T1 0x13 /* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T2 0x14 /* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T3 0x15 /* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T4 0x16 /* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_T5 0x17 /* Load timer output buffer byte 1 */
+#define HP_SDC_CMD_READ_D0 0xf0 /* Load from i8042 RAM location 0x70 */
+#define HP_SDC_CMD_READ_D1 0xf1 /* Load from i8042 RAM location 0x71 */
+#define HP_SDC_CMD_READ_D2 0xf2 /* Load from i8042 RAM location 0x72 */
+#define HP_SDC_CMD_READ_D3 0xf3 /* Load from i8042 RAM location 0x73 */
+#define HP_SDC_CMD_READ_VT1 0xf4 /* Load from i8042 RAM location 0x74 */
+#define HP_SDC_CMD_READ_VT2 0xf5 /* Load from i8042 RAM location 0x75 */
+#define HP_SDC_CMD_READ_VT3 0xf6 /* Load from i8042 RAM location 0x76 */
+#define HP_SDC_CMD_READ_VT4 0xf7 /* Load from i8042 RAM location 0x77 */
+#define HP_SDC_CMD_READ_KBN 0xf8 /* Load from i8042 RAM location 0x78 */
+#define HP_SDC_CMD_READ_KBC 0xf9 /* Load from i8042 RAM location 0x79 */
+#define HP_SDC_CMD_READ_LPS 0xfa /* Load from i8042 RAM location 0x7a */
+#define HP_SDC_CMD_READ_LPC 0xfb /* Load from i8042 RAM location 0x7b */
+#define HP_SDC_CMD_READ_RSV 0xfc /* Load from i8042 RAM location 0x7c */
+#define HP_SDC_CMD_READ_LPR 0xfd /* Load from i8042 RAM location 0x7d */
+#define HP_SDC_CMD_READ_XTD 0xfe /* Load from i8042 RAM location 0x7e */
+#define HP_SDC_CMD_READ_STR 0xff /* Load from i8042 RAM location 0x7f */
+
+#define HP_SDC_CMD_SET_ARD 0xA0 /* Set emulated autorepeat delay */
+#define HP_SDC_CMD_SET_ARR 0xA2 /* Set emulated autorepeat rate */
+#define HP_SDC_CMD_SET_BELL 0xA3 /* Set voice 3 params for "beep" cmd */
+#define HP_SDC_CMD_SET_RPGR 0xA6 /* Set "RPG" irq rate (doesn't work) */
+#define HP_SDC_CMD_SET_RTMS 0xAD /* Set the RTC time (milliseconds) */
+#define HP_SDC_CMD_SET_RTD 0xAF /* Set the RTC time (days) */
+#define HP_SDC_CMD_SET_FHS 0xB2 /* Set fast handshake timer */
+#define HP_SDC_CMD_SET_MT 0xB4 /* Set match timer */
+#define HP_SDC_CMD_SET_DT 0xB7 /* Set delay timer */
+#define HP_SDC_CMD_SET_CT 0xBA /* Set cycle timer */
+#define HP_SDC_CMD_SET_RAMP 0xC1 /* Reset READ_RAM autoinc counter */
+#define HP_SDC_CMD_SET_D0 0xe0 /* Load to i8042 RAM location 0x70 */
+#define HP_SDC_CMD_SET_D1 0xe1 /* Load to i8042 RAM location 0x71 */
+#define HP_SDC_CMD_SET_D2 0xe2 /* Load to i8042 RAM location 0x72 */
+#define HP_SDC_CMD_SET_D3 0xe3 /* Load to i8042 RAM location 0x73 */
+#define HP_SDC_CMD_SET_VT1 0xe4 /* Load to i8042 RAM location 0x74 */
+#define HP_SDC_CMD_SET_VT2 0xe5 /* Load to i8042 RAM location 0x75 */
+#define HP_SDC_CMD_SET_VT3 0xe6 /* Load to i8042 RAM location 0x76 */
+#define HP_SDC_CMD_SET_VT4 0xe7 /* Load to i8042 RAM location 0x77 */
+#define HP_SDC_CMD_SET_KBN 0xe8 /* Load to i8042 RAM location 0x78 */
+#define HP_SDC_CMD_SET_KBC 0xe9 /* Load to i8042 RAM location 0x79 */
+#define HP_SDC_CMD_SET_LPS 0xea /* Load to i8042 RAM location 0x7a */
+#define HP_SDC_CMD_SET_LPC 0xeb /* Load to i8042 RAM location 0x7b */
+#define HP_SDC_CMD_SET_RSV 0xec /* Load to i8042 RAM location 0x7c */
+#define HP_SDC_CMD_SET_LPR 0xed /* Load to i8042 RAM location 0x7d */
+#define HP_SDC_CMD_SET_XTD 0xee /* Load to i8042 RAM location 0x7e */
+#define HP_SDC_CMD_SET_STR 0xef /* Load to i8042 RAM location 0x7f */
+
+#define HP_SDC_CMD_DO_RTCW 0xc2 /* i8042 RAM 0x70 --> RTC */
+#define HP_SDC_CMD_DO_RTCR 0xc3 /* RTC[0x70 0:3] --> irq/status/data */
+#define HP_SDC_CMD_DO_BEEP 0xc4 /* i8042 RAM 0x70-74 --> beeper,VT3 */
+#define HP_SDC_CMD_DO_HIL 0xc5 /* i8042 RAM 0x70-73 -->
+ HIL MLC R0,R1 i8042 HIL watchdog */
+
+/* Values used to (de)mangle input/output to/from the HIL MLC */
+#define HP_SDC_DATA 0x40 /* Data from an 8042 register */
+#define HP_SDC_HIL_CMD 0x50 /* Data from HIL MLC R1/8042 */
+#define HP_SDC_HIL_R1MASK 0x0f /* Contents of HIL MLC R1 0:3 */
+#define HP_SDC_HIL_AUTO 0x10 /* Set if POL results from i8042 */
+#define HP_SDC_HIL_ISERR 0x80 /* Has meaning as in next 4 values */
+#define HP_SDC_HIL_RC_DONE 0x80 /* i8042 auto-configured loop */
+#define HP_SDC_HIL_ERR 0x81 /* HIL MLC R2 had a bit set */
+#define HP_SDC_HIL_TO 0x82 /* i8042 HIL watchdog expired */
+#define HP_SDC_HIL_RC 0x84 /* i8042 is auto-configuring loop */
+#define HP_SDC_HIL_DAT 0x60 /* Data from HIL MLC R0 */
+
+
+typedef struct {
+ rwlock_t ibf_lock;
+ rwlock_t lock; /* user/tasklet lock */
+ rwlock_t rtq_lock; /* isr/tasklet lock */
+ rwlock_t hook_lock; /* isr/user lock for handler add/del */
+
+ unsigned int irq, nmi; /* Our IRQ lines */
+ unsigned long base_io, status_io, data_io; /* Our IO ports */
+
+ uint8_t im; /* Interrupt mask */
+ int set_im; /* Interrupt mask needs to be set. */
+
+ int ibf; /* Last known status of IBF flag */
+ uint8_t wi; /* current i8042 write index */
+ uint8_t r7[4]; /* current i8042[0x70 - 0x74] values */
+ uint8_t r11, r7e; /* Values from version/revision regs */
+
+ hp_sdc_irqhook *timer, *reg, *hil, *pup, *cooked;
+
+#define HP_SDC_QUEUE_LEN 16
+ hp_sdc_transaction *tq[HP_SDC_QUEUE_LEN]; /* All pending read/writes */
+
+ int rcurr, rqty; /* Current read transact in process */
+ struct timeval rtv; /* Time when current read started */
+ int wcurr; /* Current write transact in process */
+
+ int dev_err; /* carries status from registration */
+#if defined(__hppa__)
+ struct parisc_device *dev;
+#elif defined(__mc68000__)
+ void *dev;
+#else
+#error No support for device registration on this arch yet.
+#endif
+
+ struct timer_list kicker; /* Keeps below task alive */
+ struct tasklet_struct task;
+
+} hp_i8042_sdc;
+
+#endif /* _LINUX_HP_SDC_H */
diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h
index 1109044..c0e7fab 100644
--- a/include/linux/i2c-algo-bit.h
+++ b/include/linux/i2c-algo-bit.h
@@ -21,8 +21,6 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
Frodo Looijaard <frodol@dds.nl> */
-/* $Id: i2c-algo-bit.h,v 1.10 2003/01/21 08:08:16 kmalkki Exp $ */
-
#ifndef _LINUX_I2C_ALGO_BIT_H
#define _LINUX_I2C_ALGO_BIT_H
@@ -46,8 +44,6 @@
int timeout; /* in jiffies */
};
-#define I2C_BIT_ADAP_MAX 16
-
int i2c_bit_add_bus(struct i2c_adapter *);
int i2c_bit_del_bus(struct i2c_adapter *);
diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h
index 941b786..226693e 100644
--- a/include/linux/i2c-algo-pca.h
+++ b/include/linux/i2c-algo-pca.h
@@ -9,8 +9,6 @@
int (*wait_for_interrupt) (struct i2c_algo_pca_data *adap);
};
-#define I2C_PCA_ADAP_MAX 16
-
int i2c_pca_add_bus(struct i2c_adapter *);
int i2c_pca_del_bus(struct i2c_adapter *);
diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h
index 2a50856..18b0adf 100644
--- a/include/linux/i2c-algo-pcf.h
+++ b/include/linux/i2c-algo-pcf.h
@@ -22,8 +22,6 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
Frodo Looijaard <frodol@dds.nl> */
-/* $Id: i2c-algo-pcf.h,v 1.8 2003/01/21 08:08:16 kmalkki Exp $ */
-
#ifndef _LINUX_I2C_ALGO_PCF_H
#define _LINUX_I2C_ALGO_PCF_H
@@ -41,8 +39,6 @@
int timeout;
};
-#define I2C_PCF_ADAP_MAX 16
-
int i2c_pcf_add_bus(struct i2c_adapter *);
int i2c_pcf_del_bus(struct i2c_adapter *);
diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h
index 5416956..81c229a 100644
--- a/include/linux/i2c-dev.h
+++ b/include/linux/i2c-dev.h
@@ -19,8 +19,6 @@
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/* $Id: i2c-dev.h,v 1.13 2003/01/21 08:08:16 kmalkki Exp $ */
-
#ifndef _LINUX_I2C_DEV_H
#define _LINUX_I2C_DEV_H
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 44f3087..1ce4b54 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -164,10 +164,7 @@
/* --- Bit algorithm adapters */
#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */
-#define I2C_HW_B_LPC 0x010001 /* Parallel port control reg. */
#define I2C_HW_B_SER 0x010002 /* Serial line interface */
-#define I2C_HW_B_ELV 0x010003 /* ELV Card */
-#define I2C_HW_B_VELLE 0x010004 /* Vellemann K8000 */
#define I2C_HW_B_BT848 0x010005 /* BT848 video boards */
#define I2C_HW_B_WNV 0x010006 /* Winnov Videums */
#define I2C_HW_B_VIA 0x010007 /* Via vt82c586b */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 3d49a30..f88577c 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -23,14 +23,13 @@
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
Frodo Looijaard <frodol@dds.nl> */
-/* $Id: i2c.h,v 1.68 2003/01/21 08:08:16 kmalkki Exp $ */
-
#ifndef _LINUX_I2C_H
#define _LINUX_I2C_H
#include <linux/module.h>
#include <linux/types.h>
#include <linux/i2c-id.h>
+#include <linux/mod_devicetable.h>
#include <linux/device.h> /* for struct device */
#include <asm/semaphore.h>
@@ -94,10 +93,10 @@
extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command);
extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
u8 command, u16 value);
-/* Returns the number of bytes transferred */
extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
u8 command, u8 length,
u8 *values);
+/* Returns the number of read bytes */
extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
u8 command, u8 *values);
@@ -391,10 +390,6 @@
#define I2C_FUNC_10BIT_ADDR 0x00000002
#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
#define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_READ_WORD_DATA_PEC 0x00000800 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC 0x00001000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_PROC_CALL_PEC 0x00002000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL_PEC 0x00004000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_QUICK 0x00010000
#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
@@ -410,8 +405,6 @@
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC 0x40000000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC 0x80000000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
I2C_FUNC_SMBUS_WRITE_BYTE)
@@ -425,17 +418,6 @@
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
#define I2C_FUNC_SMBUS_I2C_BLOCK_2 (I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2)
-#define I2C_FUNC_SMBUS_BLOCK_DATA_PEC (I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC | \
- I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC)
-#define I2C_FUNC_SMBUS_WORD_DATA_PEC (I2C_FUNC_SMBUS_READ_WORD_DATA_PEC | \
- I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC)
-
-#define I2C_FUNC_SMBUS_READ_BYTE_PEC I2C_FUNC_SMBUS_READ_BYTE_DATA
-#define I2C_FUNC_SMBUS_WRITE_BYTE_PEC I2C_FUNC_SMBUS_WRITE_BYTE_DATA
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA_PEC I2C_FUNC_SMBUS_READ_WORD_DATA
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA_PEC I2C_FUNC_SMBUS_WRITE_WORD_DATA
-#define I2C_FUNC_SMBUS_BYTE_PEC I2C_FUNC_SMBUS_BYTE_DATA
-#define I2C_FUNC_SMBUS_BYTE_DATA_PEC I2C_FUNC_SMBUS_WORD_DATA
#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
I2C_FUNC_SMBUS_BYTE | \
@@ -443,20 +425,17 @@
I2C_FUNC_SMBUS_WORD_DATA | \
I2C_FUNC_SMBUS_PROC_CALL | \
I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
- I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC | \
I2C_FUNC_SMBUS_I2C_BLOCK)
/*
* Data for SMBus Messages
*/
#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
-#define I2C_SMBUS_I2C_BLOCK_MAX 32 /* Not specified but we use same structure */
union i2c_smbus_data {
__u8 byte;
__u16 word;
- __u8 block[I2C_SMBUS_BLOCK_MAX + 3]; /* block[0] is used for length */
- /* one more for read length in block process call */
- /* and one more for PEC */
+ __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
+ /* and one more for user-space compatibility */
};
/* smbus_access read or write markers */
@@ -473,10 +452,6 @@
#define I2C_SMBUS_BLOCK_DATA 5
#define I2C_SMBUS_I2C_BLOCK_DATA 6
#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */
-#define I2C_SMBUS_BLOCK_DATA_PEC 8 /* SMBus 2.0 */
-#define I2C_SMBUS_PROC_CALL_PEC 9 /* SMBus 2.0 */
-#define I2C_SMBUS_BLOCK_PROC_CALL_PEC 10 /* SMBus 2.0 */
-#define I2C_SMBUS_WORD_DATA_PEC 11 /* SMBus 2.0 */
/* ----- commands for the ioctl like i2c_command call:
@@ -506,11 +481,6 @@
#define I2C_SMBUS 0x0720 /* SMBus-level access */
-/* ... algo-bit.c recognizes */
-#define I2C_UDELAY 0x0705 /* set delay in microsecs between each */
- /* written byte (except address) */
-#define I2C_MDELAY 0x0706 /* millisec delay between written bytes */
-
/* ----- I2C-DEV: char device interface stuff ------------------------- */
#define I2C_MAJOR 89 /* Device major number */
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index b4af45aa..9230032 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -66,8 +66,6 @@
struct device device;
struct semaphore lock; /* device lock */
-
- struct class_device classdev; /* i2o device class */
};
/*
@@ -194,7 +192,7 @@
struct resource mem_resource; /* Mem resource allocated to the IOP */
struct device device;
- struct class_device classdev; /* I2O controller class */
+ struct class_device *classdev; /* I2O controller class device */
struct i2o_device *exec; /* Executive */
#if BITS_PER_LONG == 64
spinlock_t context_list_lock; /* lock for context_list */
diff --git a/include/linux/input.h b/include/linux/input.h
index e8c296f..f623c74 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -12,6 +12,7 @@
#ifdef __KERNEL__
#include <linux/time.h>
#include <linux/list.h>
+#include <linux/device.h>
#else
#include <sys/time.h>
#include <sys/ioctl.h>
@@ -644,6 +645,7 @@
#define BUS_ADB 0x17
#define BUS_I2C 0x18
#define BUS_HOST 0x19
+#define BUS_GSC 0x1A
/*
* Values describing the status of an effect
@@ -889,11 +891,15 @@
struct semaphore sem; /* serializes open and close operations */
unsigned int users;
- struct device *dev;
+ struct class_device cdev;
+ struct device *dev; /* will be removed soon */
+
+ int dynalloc; /* temporarily */
struct list_head h_list;
struct list_head node;
};
+#define to_input_dev(d) container_of(d, struct input_dev, cdev)
/*
* Structure for hotplug & device<->driver matching.
@@ -984,6 +990,23 @@
INIT_LIST_HEAD(&dev->node);
}
+struct input_dev *input_allocate_device(void);
+
+static inline void input_free_device(struct input_dev *dev)
+{
+ kfree(dev);
+}
+
+static inline struct input_dev *input_get_device(struct input_dev *dev)
+{
+ return to_input_dev(class_device_get(&dev->cdev));
+}
+
+static inline void input_put_device(struct input_dev *dev)
+{
+ class_device_put(&dev->cdev);
+}
+
void input_register_device(struct input_dev *);
void input_unregister_device(struct input_dev *);
@@ -1052,7 +1075,7 @@
dev->absbit[LONG(axis)] |= BIT(axis);
}
-extern struct class *input_class;
+extern struct class input_class;
#endif
#endif
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index 1ab78e8..aef6042 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -50,7 +50,7 @@
#define MMC_ERR_INVALID 5
struct mmc_data *data; /* data segment associated with cmd */
- struct mmc_request *mrq; /* assoicated request */
+ struct mmc_request *mrq; /* associated request */
};
struct mmc_data {
@@ -68,7 +68,7 @@
unsigned int bytes_xfered;
struct mmc_command *stop; /* stop command */
- struct mmc_request *mrq; /* assoicated request */
+ struct mmc_request *mrq; /* associated request */
unsigned int sg_len; /* size of scatter list */
struct scatterlist *sg; /* I/O scatter list */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 2f0299a..7b08c11 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -244,4 +244,9 @@
#define PCMCIA_DEV_ID_MATCH_FAKE_CIS 0x0200
#define PCMCIA_DEV_ID_MATCH_ANONYMOUS 0x0400
+/* I2C */
+struct i2c_device_id {
+ __u16 id;
+};
+
#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a9281b2..c6efce4 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -308,6 +308,7 @@
#define NETIF_F_VLAN_CHALLENGED 1024 /* Device cannot handle VLAN packets */
#define NETIF_F_TSO 2048 /* Can offload TCP/IP segmentation */
#define NETIF_F_LLTX 4096 /* LockLess TX */
+#define NETIF_F_UFO 8192 /* Can offload UDP Large Send*/
struct net_device *next_sched;
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 5cfb076..7897cf5 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -219,7 +219,9 @@
struct dev_pm_info {
pm_message_t power_state;
+ unsigned can_wakeup:1;
#ifdef CONFIG_PM
+ unsigned should_wakeup:1;
pm_message_t prev_state;
void * saved_state;
atomic_t pm_users;
@@ -236,13 +238,35 @@
#ifdef CONFIG_PM
extern int device_suspend(pm_message_t state);
-#else
+
+#define device_set_wakeup_enable(dev,val) \
+ ((dev)->power.should_wakeup = !!(val))
+#define device_may_wakeup(dev) \
+ (device_can_wakeup(dev) && (dev)->power.should_wakeup)
+
+#else /* !CONFIG_PM */
+
static inline int device_suspend(pm_message_t state)
{
return 0;
}
+
+#define device_set_wakeup_enable(dev,val) do{}while(0)
+#define device_may_wakeup(dev) (0)
+
#endif
+/* changes to device_may_wakeup take effect on the next pm state change.
+ * by default, devices should wakeup if they can.
+ */
+#define device_can_wakeup(dev) \
+ ((dev)->power.can_wakeup)
+#define device_init_wakeup(dev,val) \
+ do { \
+ device_can_wakeup(dev) = !!(val); \
+ device_set_wakeup_enable(dev,val); \
+ } while(0)
+
#endif /* __KERNEL__ */
#endif /* _LINUX_PM_H */
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index b756935..4286d83 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -137,6 +137,8 @@
unsigned int nr_frags;
unsigned short tso_size;
unsigned short tso_segs;
+ unsigned short ufo_size;
+ unsigned int ip6_frag_id;
struct sk_buff *frag_list;
skb_frag_t frags[MAX_SKB_FRAGS];
};
@@ -341,6 +343,11 @@
extern void skb_under_panic(struct sk_buff *skb, int len,
void *here);
+extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb,
+ int getfrag(void *from, char *to, int offset,
+ int len,int odd, struct sk_buff *skb),
+ void *from, int length);
+
struct skb_seq_state
{
__u32 lower_offset;
diff --git a/include/linux/x1205.h b/include/linux/x1205.h
new file mode 100644
index 0000000..64fd3af
--- /dev/null
+++ b/include/linux/x1205.h
@@ -0,0 +1,31 @@
+/*
+ * x1205.h - defines for drivers/i2c/chips/x1205.c
+ * Copyright 2004 Karen Spearel
+ * Copyright 2005 Alessandro Zummo
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_X1205_H__
+#define __LINUX_X1205_H__
+
+/* commands */
+
+#define X1205_CMD_GETDATETIME 0
+#define X1205_CMD_SETTIME 1
+#define X1205_CMD_SETDATETIME 2
+#define X1205_CMD_GETALARM 3
+#define X1205_CMD_SETALARM 4
+#define X1205_CMD_GETDTRIM 5
+#define X1205_CMD_SETDTRIM 6
+#define X1205_CMD_GETATRIM 7
+#define X1205_CMD_SETATRIM 8
+
+extern int x1205_do_command(unsigned int cmd, void *arg);
+extern int x1205_direct_attach(int adapter_id,
+ struct i2c_client_address_data *address_data);
+
+#endif /* __LINUX_X1205_H__ */
diff --git a/include/media/ovcamchip.h b/include/media/ovcamchip.h
index cb7c0aa..8138983 100644
--- a/include/media/ovcamchip.h
+++ b/include/media/ovcamchip.h
@@ -17,20 +17,6 @@
#include <linux/videodev.h>
#include <linux/i2c.h>
-/* Remove these once they are officially defined */
-#ifndef I2C_DRIVERID_OVCAMCHIP
- #define I2C_DRIVERID_OVCAMCHIP 0xf00f
-#endif
-#ifndef I2C_HW_SMBUS_OV511
- #define I2C_HW_SMBUS_OV511 0xfe
-#endif
-#ifndef I2C_HW_SMBUS_OV518
- #define I2C_HW_SMBUS_OV518 0xff
-#endif
-#ifndef I2C_HW_SMBUS_OVFX2
- #define I2C_HW_SMBUS_OVFX2 0xfd
-#endif
-
/* --------------------------------- */
/* ENUMERATIONS */
/* --------------------------------- */
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 2104586..e42d728 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -171,4 +171,10 @@
int bt_err(__u16 code);
+extern int hci_sock_init(void);
+extern int hci_sock_cleanup(void);
+
+extern int bt_sysfs_init(void);
+extern void bt_sysfs_cleanup(void);
+
#endif /* __BLUETOOTH_H */
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index fbe557f..e656be7 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -275,9 +275,6 @@
atomic_inc(&s->refcnt);
}
-/* ---- RFCOMM chechsum ---- */
-extern u8 rfcomm_crc_table[];
-
/* ---- RFCOMM sockets ---- */
struct sockaddr_rc {
sa_family_t rc_family;
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 7ef6f6a..3ab3754 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -54,7 +54,7 @@
static struct sock *uevent_sock;
/**
- * send_uevent - notify userspace by sending event trough netlink socket
+ * send_uevent - notify userspace by sending event through netlink socket
*
* @signal: signal name
* @obj: object path (kobject)
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 12b4334..03532062 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -308,12 +308,6 @@
.create = bt_sock_create,
};
-extern int hci_sock_init(void);
-extern int hci_sock_cleanup(void);
-
-extern int bt_sysfs_init(void);
-extern int bt_sysfs_cleanup(void);
-
static int __init bt_init(void)
{
BT_INFO("Core ver %s", VERSION);
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 55dc42e..cf0df1c 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -87,7 +87,7 @@
return notifier_chain_unregister(&hci_notifier, nb);
}
-void hci_notify(struct hci_dev *hdev, int event)
+static void hci_notify(struct hci_dev *hdev, int event)
{
notifier_call_chain(&hci_notifier, event, hdev);
}
@@ -1347,7 +1347,7 @@
kfree_skb(skb);
}
-void hci_rx_task(unsigned long arg)
+static void hci_rx_task(unsigned long arg)
{
struct hci_dev *hdev = (struct hci_dev *) arg;
struct sk_buff *skb;
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 32ef797..799e448 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -66,20 +66,20 @@
/* Packet types */
0x10,
/* Events */
- { 0x1000d9fe, 0x0000300c },
+ { 0x1000d9fe, 0x0000b00c },
/* Commands */
{
{ 0x0 },
/* OGF_LINK_CTL */
- { 0xbe000006, 0x00000001, 0x0000, 0x00 },
+ { 0xbe000006, 0x00000001, 0x000000, 0x00 },
/* OGF_LINK_POLICY */
- { 0x00005200, 0x00000000, 0x0000, 0x00 },
+ { 0x00005200, 0x00000000, 0x000000, 0x00 },
/* OGF_HOST_CTL */
- { 0xaab00200, 0x2b402aaa, 0x0154, 0x00 },
+ { 0xaab00200, 0x2b402aaa, 0x020154, 0x00 },
/* OGF_INFO_PARAM */
- { 0x000002be, 0x00000000, 0x0000, 0x00 },
+ { 0x000002be, 0x00000000, 0x000000, 0x00 },
/* OGF_STATUS_PARAM */
- { 0x000000ea, 0x00000000, 0x0000, 0x00 }
+ { 0x000000ea, 0x00000000, 0x000000, 0x00 }
}
};
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index de8af5f..860444a 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -520,7 +520,7 @@
if (session->input) {
input_unregister_device(session->input);
- kfree(session->input);
+ session->input = NULL;
}
up_write(&hidp_session_sem);
@@ -536,6 +536,8 @@
input->private = session;
+ input->name = "Bluetooth HID Boot Protocol Device";
+
input->id.bustype = BUS_BLUETOOTH;
input->id.vendor = req->vendor;
input->id.product = req->product;
@@ -582,16 +584,15 @@
return -ENOTUNIQ;
session = kmalloc(sizeof(struct hidp_session), GFP_KERNEL);
- if (!session)
+ if (!session)
return -ENOMEM;
memset(session, 0, sizeof(struct hidp_session));
- session->input = kmalloc(sizeof(struct input_dev), GFP_KERNEL);
+ session->input = input_allocate_device();
if (!session->input) {
kfree(session);
return -ENOMEM;
}
- memset(session->input, 0, sizeof(struct input_dev));
down_write(&hidp_session_sem);
@@ -651,8 +652,10 @@
__hidp_unlink_session(session);
- if (session->input)
+ if (session->input) {
input_unregister_device(session->input);
+ session->input = NULL; /* don't try to free it here */
+ }
failed:
up_write(&hidp_session_sem);
diff --git a/net/bluetooth/rfcomm/Makefile b/net/bluetooth/rfcomm/Makefile
index aecec45..fe07988 100644
--- a/net/bluetooth/rfcomm/Makefile
+++ b/net/bluetooth/rfcomm/Makefile
@@ -4,5 +4,5 @@
obj-$(CONFIG_BT_RFCOMM) += rfcomm.o
-rfcomm-y := core.o sock.o crc.o
+rfcomm-y := core.o sock.o
rfcomm-$(CONFIG_BT_RFCOMM_TTY) += tty.o
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 35adce6..c3d56ea 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -133,6 +133,49 @@
/* ---- RFCOMM FCS computation ---- */
+/* reversed, 8-bit, poly=0x07 */
+static unsigned char rfcomm_crc_table[256] = {
+ 0x00, 0x91, 0xe3, 0x72, 0x07, 0x96, 0xe4, 0x75,
+ 0x0e, 0x9f, 0xed, 0x7c, 0x09, 0x98, 0xea, 0x7b,
+ 0x1c, 0x8d, 0xff, 0x6e, 0x1b, 0x8a, 0xf8, 0x69,
+ 0x12, 0x83, 0xf1, 0x60, 0x15, 0x84, 0xf6, 0x67,
+
+ 0x38, 0xa9, 0xdb, 0x4a, 0x3f, 0xae, 0xdc, 0x4d,
+ 0x36, 0xa7, 0xd5, 0x44, 0x31, 0xa0, 0xd2, 0x43,
+ 0x24, 0xb5, 0xc7, 0x56, 0x23, 0xb2, 0xc0, 0x51,
+ 0x2a, 0xbb, 0xc9, 0x58, 0x2d, 0xbc, 0xce, 0x5f,
+
+ 0x70, 0xe1, 0x93, 0x02, 0x77, 0xe6, 0x94, 0x05,
+ 0x7e, 0xef, 0x9d, 0x0c, 0x79, 0xe8, 0x9a, 0x0b,
+ 0x6c, 0xfd, 0x8f, 0x1e, 0x6b, 0xfa, 0x88, 0x19,
+ 0x62, 0xf3, 0x81, 0x10, 0x65, 0xf4, 0x86, 0x17,
+
+ 0x48, 0xd9, 0xab, 0x3a, 0x4f, 0xde, 0xac, 0x3d,
+ 0x46, 0xd7, 0xa5, 0x34, 0x41, 0xd0, 0xa2, 0x33,
+ 0x54, 0xc5, 0xb7, 0x26, 0x53, 0xc2, 0xb0, 0x21,
+ 0x5a, 0xcb, 0xb9, 0x28, 0x5d, 0xcc, 0xbe, 0x2f,
+
+ 0xe0, 0x71, 0x03, 0x92, 0xe7, 0x76, 0x04, 0x95,
+ 0xee, 0x7f, 0x0d, 0x9c, 0xe9, 0x78, 0x0a, 0x9b,
+ 0xfc, 0x6d, 0x1f, 0x8e, 0xfb, 0x6a, 0x18, 0x89,
+ 0xf2, 0x63, 0x11, 0x80, 0xf5, 0x64, 0x16, 0x87,
+
+ 0xd8, 0x49, 0x3b, 0xaa, 0xdf, 0x4e, 0x3c, 0xad,
+ 0xd6, 0x47, 0x35, 0xa4, 0xd1, 0x40, 0x32, 0xa3,
+ 0xc4, 0x55, 0x27, 0xb6, 0xc3, 0x52, 0x20, 0xb1,
+ 0xca, 0x5b, 0x29, 0xb8, 0xcd, 0x5c, 0x2e, 0xbf,
+
+ 0x90, 0x01, 0x73, 0xe2, 0x97, 0x06, 0x74, 0xe5,
+ 0x9e, 0x0f, 0x7d, 0xec, 0x99, 0x08, 0x7a, 0xeb,
+ 0x8c, 0x1d, 0x6f, 0xfe, 0x8b, 0x1a, 0x68, 0xf9,
+ 0x82, 0x13, 0x61, 0xf0, 0x85, 0x14, 0x66, 0xf7,
+
+ 0xa8, 0x39, 0x4b, 0xda, 0xaf, 0x3e, 0x4c, 0xdd,
+ 0xa6, 0x37, 0x45, 0xd4, 0xa1, 0x30, 0x42, 0xd3,
+ 0xb4, 0x25, 0x57, 0xc6, 0xb3, 0x22, 0x50, 0xc1,
+ 0xba, 0x2b, 0x59, 0xc8, 0xbd, 0x2c, 0x5e, 0xcf
+};
+
/* CRC on 2 bytes */
#define __crc(data) (rfcomm_crc_table[rfcomm_crc_table[0xff ^ data[0]] ^ data[1]])
diff --git a/net/bluetooth/rfcomm/crc.c b/net/bluetooth/rfcomm/crc.c
deleted file mode 100644
index 1011bc4..0000000
--- a/net/bluetooth/rfcomm/crc.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- RFCOMM implementation for Linux Bluetooth stack (BlueZ).
- Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com>
- Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
-/*
- * RFCOMM FCS calculation.
- *
- * $Id: crc.c,v 1.2 2002/09/21 09:54:32 holtmann Exp $
- */
-
-/* reversed, 8-bit, poly=0x07 */
-unsigned char rfcomm_crc_table[256] = {
- 0x00, 0x91, 0xe3, 0x72, 0x07, 0x96, 0xe4, 0x75,
- 0x0e, 0x9f, 0xed, 0x7c, 0x09, 0x98, 0xea, 0x7b,
- 0x1c, 0x8d, 0xff, 0x6e, 0x1b, 0x8a, 0xf8, 0x69,
- 0x12, 0x83, 0xf1, 0x60, 0x15, 0x84, 0xf6, 0x67,
-
- 0x38, 0xa9, 0xdb, 0x4a, 0x3f, 0xae, 0xdc, 0x4d,
- 0x36, 0xa7, 0xd5, 0x44, 0x31, 0xa0, 0xd2, 0x43,
- 0x24, 0xb5, 0xc7, 0x56, 0x23, 0xb2, 0xc0, 0x51,
- 0x2a, 0xbb, 0xc9, 0x58, 0x2d, 0xbc, 0xce, 0x5f,
-
- 0x70, 0xe1, 0x93, 0x02, 0x77, 0xe6, 0x94, 0x05,
- 0x7e, 0xef, 0x9d, 0x0c, 0x79, 0xe8, 0x9a, 0x0b,
- 0x6c, 0xfd, 0x8f, 0x1e, 0x6b, 0xfa, 0x88, 0x19,
- 0x62, 0xf3, 0x81, 0x10, 0x65, 0xf4, 0x86, 0x17,
-
- 0x48, 0xd9, 0xab, 0x3a, 0x4f, 0xde, 0xac, 0x3d,
- 0x46, 0xd7, 0xa5, 0x34, 0x41, 0xd0, 0xa2, 0x33,
- 0x54, 0xc5, 0xb7, 0x26, 0x53, 0xc2, 0xb0, 0x21,
- 0x5a, 0xcb, 0xb9, 0x28, 0x5d, 0xcc, 0xbe, 0x2f,
-
- 0xe0, 0x71, 0x03, 0x92, 0xe7, 0x76, 0x04, 0x95,
- 0xee, 0x7f, 0x0d, 0x9c, 0xe9, 0x78, 0x0a, 0x9b,
- 0xfc, 0x6d, 0x1f, 0x8e, 0xfb, 0x6a, 0x18, 0x89,
- 0xf2, 0x63, 0x11, 0x80, 0xf5, 0x64, 0x16, 0x87,
-
- 0xd8, 0x49, 0x3b, 0xaa, 0xdf, 0x4e, 0x3c, 0xad,
- 0xd6, 0x47, 0x35, 0xa4, 0xd1, 0x40, 0x32, 0xa3,
- 0xc4, 0x55, 0x27, 0xb6, 0xc3, 0x52, 0x20, 0xb1,
- 0xca, 0x5b, 0x29, 0xb8, 0xcd, 0x5c, 0x2e, 0xbf,
-
- 0x90, 0x01, 0x73, 0xe2, 0x97, 0x06, 0x74, 0xe5,
- 0x9e, 0x0f, 0x7d, 0xec, 0x99, 0x08, 0x7a, 0xeb,
- 0x8c, 0x1d, 0x6f, 0xfe, 0x8b, 0x1a, 0x68, 0xf9,
- 0x82, 0x13, 0x61, 0xf0, 0x85, 0x14, 0x66, 0xf7,
-
- 0xa8, 0x39, 0x4b, 0xda, 0xaf, 0x3e, 0x4c, 0xdd,
- 0xa6, 0x37, 0x45, 0xd4, 0xa1, 0x30, 0x42, 0xd3,
- 0xb4, 0x25, 0x57, 0xc6, 0xb3, 0x22, 0x50, 0xc1,
- 0xba, 0x2b, 0x59, 0xc8, 0xbd, 0x2c, 0x5e, 0xcf
-};
diff --git a/net/core/dev.c b/net/core/dev.c
index a44eeef..8d15415 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2717,6 +2717,20 @@
dev->name);
dev->features &= ~NETIF_F_TSO;
}
+ if (dev->features & NETIF_F_UFO) {
+ if (!(dev->features & NETIF_F_HW_CSUM)) {
+ printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no "
+ "NETIF_F_HW_CSUM feature.\n",
+ dev->name);
+ dev->features &= ~NETIF_F_UFO;
+ }
+ if (!(dev->features & NETIF_F_SG)) {
+ printk(KERN_ERR "%s: Dropping NETIF_F_UFO since no "
+ "NETIF_F_SG feature.\n",
+ dev->name);
+ dev->features &= ~NETIF_F_UFO;
+ }
+ }
/*
* nil rebuild_header routine,
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 404b761..0350586 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -93,6 +93,20 @@
}
+u32 ethtool_op_get_ufo(struct net_device *dev)
+{
+ return (dev->features & NETIF_F_UFO) != 0;
+}
+
+int ethtool_op_set_ufo(struct net_device *dev, u32 data)
+{
+ if (data)
+ dev->features |= NETIF_F_UFO;
+ else
+ dev->features &= ~NETIF_F_UFO;
+ return 0;
+}
+
/* Handlers for each ethtool command */
static int ethtool_get_settings(struct net_device *dev, void __user *useraddr)
@@ -483,6 +497,11 @@
return err;
}
+ if (!data && dev->ethtool_ops->set_ufo) {
+ err = dev->ethtool_ops->set_ufo(dev, 0);
+ if (err)
+ return err;
+ }
return dev->ethtool_ops->set_sg(dev, data);
}
@@ -569,6 +588,32 @@
return dev->ethtool_ops->set_tso(dev, edata.data);
}
+static int ethtool_get_ufo(struct net_device *dev, char __user *useraddr)
+{
+ struct ethtool_value edata = { ETHTOOL_GTSO };
+
+ if (!dev->ethtool_ops->get_ufo)
+ return -EOPNOTSUPP;
+ edata.data = dev->ethtool_ops->get_ufo(dev);
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+}
+static int ethtool_set_ufo(struct net_device *dev, char __user *useraddr)
+{
+ struct ethtool_value edata;
+
+ if (!dev->ethtool_ops->set_ufo)
+ return -EOPNOTSUPP;
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+ if (edata.data && !(dev->features & NETIF_F_SG))
+ return -EINVAL;
+ if (edata.data && !(dev->features & NETIF_F_HW_CSUM))
+ return -EINVAL;
+ return dev->ethtool_ops->set_ufo(dev, edata.data);
+}
+
static int ethtool_self_test(struct net_device *dev, char __user *useraddr)
{
struct ethtool_test test;
@@ -854,6 +899,12 @@
case ETHTOOL_GPERMADDR:
rc = ethtool_get_perm_addr(dev, useraddr);
break;
+ case ETHTOOL_GUFO:
+ rc = ethtool_get_ufo(dev, useraddr);
+ break;
+ case ETHTOOL_SUFO:
+ rc = ethtool_set_ufo(dev, useraddr);
+ break;
default:
rc = -EOPNOTSUPP;
}
@@ -882,3 +933,5 @@
EXPORT_SYMBOL(ethtool_op_set_tso);
EXPORT_SYMBOL(ethtool_op_set_tx_csum);
EXPORT_SYMBOL(ethtool_op_set_tx_hw_csum);
+EXPORT_SYMBOL(ethtool_op_set_ufo);
+EXPORT_SYMBOL(ethtool_op_get_ufo);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index ef9d46b..95501e4 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -176,6 +176,8 @@
skb_shinfo(skb)->tso_size = 0;
skb_shinfo(skb)->tso_segs = 0;
skb_shinfo(skb)->frag_list = NULL;
+ skb_shinfo(skb)->ufo_size = 0;
+ skb_shinfo(skb)->ip6_frag_id = 0;
out:
return skb;
nodata:
@@ -1696,6 +1698,78 @@
return textsearch_find(config, state);
}
+/**
+ * skb_append_datato_frags: - append the user data to a skb
+ * @sk: sock structure
+ * @skb: skb structure to be appened with user data.
+ * @getfrag: call back function to be used for getting the user data
+ * @from: pointer to user message iov
+ * @length: length of the iov message
+ *
+ * Description: This procedure append the user data in the fragment part
+ * of the skb if any page alloc fails user this procedure returns -ENOMEM
+ */
+int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb,
+ int getfrag(void *from, char *to, int offset,
+ int len, int odd, struct sk_buff *skb),
+ void *from, int length)
+{
+ int frg_cnt = 0;
+ skb_frag_t *frag = NULL;
+ struct page *page = NULL;
+ int copy, left;
+ int offset = 0;
+ int ret;
+
+ do {
+ /* Return error if we don't have space for new frag */
+ frg_cnt = skb_shinfo(skb)->nr_frags;
+ if (frg_cnt >= MAX_SKB_FRAGS)
+ return -EFAULT;
+
+ /* allocate a new page for next frag */
+ page = alloc_pages(sk->sk_allocation, 0);
+
+ /* If alloc_page fails just return failure and caller will
+ * free previous allocated pages by doing kfree_skb()
+ */
+ if (page == NULL)
+ return -ENOMEM;
+
+ /* initialize the next frag */
+ sk->sk_sndmsg_page = page;
+ sk->sk_sndmsg_off = 0;
+ skb_fill_page_desc(skb, frg_cnt, page, 0, 0);
+ skb->truesize += PAGE_SIZE;
+ atomic_add(PAGE_SIZE, &sk->sk_wmem_alloc);
+
+ /* get the new initialized frag */
+ frg_cnt = skb_shinfo(skb)->nr_frags;
+ frag = &skb_shinfo(skb)->frags[frg_cnt - 1];
+
+ /* copy the user data to page */
+ left = PAGE_SIZE - frag->page_offset;
+ copy = (length > left)? left : length;
+
+ ret = getfrag(from, (page_address(frag->page) +
+ frag->page_offset + frag->size),
+ offset, copy, 0, skb);
+ if (ret < 0)
+ return -EFAULT;
+
+ /* copy was successful so update the size parameters */
+ sk->sk_sndmsg_off += copy;
+ frag->size += copy;
+ skb->len += copy;
+ skb->data_len += copy;
+ offset += copy;
+ length -= copy;
+
+ } while (length > 0);
+
+ return 0;
+}
+
void __init skb_init(void)
{
skbuff_head_cache = kmem_cache_create("skbuff_head_cache",
@@ -1747,3 +1821,4 @@
EXPORT_SYMBOL(skb_seq_read);
EXPORT_SYMBOL(skb_abort_seq_read);
EXPORT_SYMBOL(skb_find_text);
+EXPORT_SYMBOL(skb_append_datato_frags);
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 87e3500..1775823 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -275,7 +275,8 @@
{
IP_INC_STATS(IPSTATS_MIB_OUTREQUESTS);
- if (skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->tso_size)
+ if (skb->len > dst_mtu(skb->dst) &&
+ !(skb_shinfo(skb)->ufo_size || skb_shinfo(skb)->tso_size))
return ip_fragment(skb, ip_finish_output);
else
return ip_finish_output(skb);
@@ -688,6 +689,60 @@
return csum;
}
+inline int ip_ufo_append_data(struct sock *sk,
+ int getfrag(void *from, char *to, int offset, int len,
+ int odd, struct sk_buff *skb),
+ void *from, int length, int hh_len, int fragheaderlen,
+ int transhdrlen, int mtu,unsigned int flags)
+{
+ struct sk_buff *skb;
+ int err;
+
+ /* There is support for UDP fragmentation offload by network
+ * device, so create one single skb packet containing complete
+ * udp datagram
+ */
+ if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) {
+ skb = sock_alloc_send_skb(sk,
+ hh_len + fragheaderlen + transhdrlen + 20,
+ (flags & MSG_DONTWAIT), &err);
+
+ if (skb == NULL)
+ return err;
+
+ /* reserve space for Hardware header */
+ skb_reserve(skb, hh_len);
+
+ /* create space for UDP/IP header */
+ skb_put(skb,fragheaderlen + transhdrlen);
+
+ /* initialize network header pointer */
+ skb->nh.raw = skb->data;
+
+ /* initialize protocol header pointer */
+ skb->h.raw = skb->data + fragheaderlen;
+
+ skb->ip_summed = CHECKSUM_HW;
+ skb->csum = 0;
+ sk->sk_sndmsg_off = 0;
+ }
+
+ err = skb_append_datato_frags(sk,skb, getfrag, from,
+ (length - transhdrlen));
+ if (!err) {
+ /* specify the length of each IP datagram fragment*/
+ skb_shinfo(skb)->ufo_size = (mtu - fragheaderlen);
+ __skb_queue_tail(&sk->sk_write_queue, skb);
+
+ return 0;
+ }
+ /* There is not enough support do UFO ,
+ * so follow normal path
+ */
+ kfree_skb(skb);
+ return err;
+}
+
/*
* ip_append_data() and ip_append_page() can make one large IP datagram
* from many pieces of data. Each pieces will be holded on the socket
@@ -777,6 +832,15 @@
csummode = CHECKSUM_HW;
inet->cork.length += length;
+ if (((length > mtu) && (sk->sk_protocol == IPPROTO_UDP)) &&
+ (rt->u.dst.dev->features & NETIF_F_UFO)) {
+
+ if(ip_ufo_append_data(sk, getfrag, from, length, hh_len,
+ fragheaderlen, transhdrlen, mtu, flags))
+ goto error;
+
+ return 0;
+ }
/* So, what's going on in the loop below?
*
@@ -1008,14 +1072,23 @@
return -EINVAL;
inet->cork.length += size;
+ if ((sk->sk_protocol == IPPROTO_UDP) &&
+ (rt->u.dst.dev->features & NETIF_F_UFO))
+ skb_shinfo(skb)->ufo_size = (mtu - fragheaderlen);
+
while (size > 0) {
int i;
- /* Check if the remaining data fits into current packet. */
- len = mtu - skb->len;
- if (len < size)
- len = maxfraglen - skb->len;
+ if (skb_shinfo(skb)->ufo_size)
+ len = size;
+ else {
+
+ /* Check if the remaining data fits into current packet. */
+ len = mtu - skb->len;
+ if (len < size)
+ len = maxfraglen - skb->len;
+ }
if (len <= 0) {
struct sk_buff *skb_prev;
char *data;
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 563b442..614296a 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -147,7 +147,8 @@
int ip6_output(struct sk_buff *skb)
{
- if (skb->len > dst_mtu(skb->dst) || dst_allfrag(skb->dst))
+ if ((skb->len > dst_mtu(skb->dst) && !skb_shinfo(skb)->ufo_size) ||
+ dst_allfrag(skb->dst))
return ip6_fragment(skb, ip6_output2);
else
return ip6_output2(skb);
@@ -768,6 +769,65 @@
*dst = NULL;
return err;
}
+inline int ip6_ufo_append_data(struct sock *sk,
+ int getfrag(void *from, char *to, int offset, int len,
+ int odd, struct sk_buff *skb),
+ void *from, int length, int hh_len, int fragheaderlen,
+ int transhdrlen, int mtu,unsigned int flags)
+
+{
+ struct sk_buff *skb;
+ int err;
+
+ /* There is support for UDP large send offload by network
+ * device, so create one single skb packet containing complete
+ * udp datagram
+ */
+ if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL) {
+ skb = sock_alloc_send_skb(sk,
+ hh_len + fragheaderlen + transhdrlen + 20,
+ (flags & MSG_DONTWAIT), &err);
+ if (skb == NULL)
+ return -ENOMEM;
+
+ /* reserve space for Hardware header */
+ skb_reserve(skb, hh_len);
+
+ /* create space for UDP/IP header */
+ skb_put(skb,fragheaderlen + transhdrlen);
+
+ /* initialize network header pointer */
+ skb->nh.raw = skb->data;
+
+ /* initialize protocol header pointer */
+ skb->h.raw = skb->data + fragheaderlen;
+
+ skb->ip_summed = CHECKSUM_HW;
+ skb->csum = 0;
+ sk->sk_sndmsg_off = 0;
+ }
+
+ err = skb_append_datato_frags(sk,skb, getfrag, from,
+ (length - transhdrlen));
+ if (!err) {
+ struct frag_hdr fhdr;
+
+ /* specify the length of each IP datagram fragment*/
+ skb_shinfo(skb)->ufo_size = (mtu - fragheaderlen) -
+ sizeof(struct frag_hdr);
+ ipv6_select_ident(skb, &fhdr);
+ skb_shinfo(skb)->ip6_frag_id = fhdr.identification;
+ __skb_queue_tail(&sk->sk_write_queue, skb);
+
+ return 0;
+ }
+ /* There is not enough support do UPD LSO,
+ * so follow normal path
+ */
+ kfree_skb(skb);
+
+ return err;
+}
int ip6_append_data(struct sock *sk, int getfrag(void *from, char *to,
int offset, int len, int odd, struct sk_buff *skb),
@@ -860,6 +920,15 @@
*/
inet->cork.length += length;
+ if (((length > mtu) && (sk->sk_protocol == IPPROTO_UDP)) &&
+ (rt->u.dst.dev->features & NETIF_F_UFO)) {
+
+ if(ip6_ufo_append_data(sk, getfrag, from, length, hh_len,
+ fragheaderlen, transhdrlen, mtu, flags))
+ goto error;
+
+ return 0;
+ }
if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL)
goto alloc_new_skb;
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 39a96c7..c4f2a0e 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -164,7 +164,7 @@
#define MLDV2_MASK(value, nb) ((nb)>=32 ? (value) : ((1<<(nb))-1) & (value))
#define MLDV2_EXP(thresh, nbmant, nbexp, value) \
((value) < (thresh) ? (value) : \
- ((MLDV2_MASK(value, nbmant) | (1<<(nbmant+nbexp))) << \
+ ((MLDV2_MASK(value, nbmant) | (1<<(nbmant))) << \
(MLDV2_MASK((value) >> (nbmant), nbexp) + (nbexp))))
#define MLDV2_QQIC(value) MLDV2_EXP(0x80, 4, 3, value)
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index f2ee673..e3d144a 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -359,6 +359,13 @@
return 1;
}
+static int do_i2c_entry(const char *filename, struct i2c_device_id *i2c, char *alias)
+{
+ strcpy(alias, "i2c:");
+ ADD(alias, "id", 1, i2c->id);
+ return 1;
+}
+
/* Ignore any prefix, eg. v850 prepends _ */
static inline int sym_is(const char *symbol, const char *name)
{
@@ -443,6 +450,9 @@
else if (sym_is(symname, "__mod_vio_device_table"))
do_table(symval, sym->st_size, sizeof(struct vio_device_id),
do_vio_entry, mod);
+ else if (sym_is(symname, "__mod_i2c_device_table"))
+ do_table(symval, sym->st_size, sizeof(struct i2c_device_id),
+ do_i2c_entry, mod);
}
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index b2d5db2..559ead6 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -20,6 +20,7 @@
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/sizes.h>
#include <asm/hardware/amba.h>
#include <sound/driver.h>
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 38b20ef..877bb00 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -275,23 +275,23 @@
return 0;
}
-static int pxa2xx_ac97_suspend(struct device *_dev, pm_message_t state, u32 level)
+static int pxa2xx_ac97_suspend(struct device *_dev, pm_message_t state)
{
snd_card_t *card = dev_get_drvdata(_dev);
int ret = 0;
- if (card && level == SUSPEND_DISABLE)
+ if (card)
ret = pxa2xx_ac97_do_suspend(card, PMSG_SUSPEND);
return ret;
}
-static int pxa2xx_ac97_resume(struct device *_dev, u32 level)
+static int pxa2xx_ac97_resume(struct device *_dev)
{
snd_card_t *card = dev_get_drvdata(_dev);
int ret = 0;
- if (card && level == RESUME_ENABLE)
+ if (card)
ret = pxa2xx_ac97_do_resume(card);
return ret;
diff --git a/sound/core/init.c b/sound/core/init.c
index c72a791..59202de 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -676,8 +676,8 @@
#define SND_GENERIC_NAME "snd_generic"
#ifdef CONFIG_PM
-static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level);
-static int snd_generic_resume(struct device *dev, u32 level);
+static int snd_generic_suspend(struct device *dev, pm_message_t state);
+static int snd_generic_resume(struct device *dev);
#endif
/* initialized in sound.c */
@@ -818,13 +818,10 @@
#ifdef CONFIG_SND_GENERIC_DRIVER
/* suspend/resume callbacks for snd_generic platform device */
-static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level)
+static int snd_generic_suspend(struct device *dev, pm_message_t state)
{
snd_card_t *card;
- if (level != SUSPEND_DISABLE)
- return 0;
-
card = get_snd_generic_card(dev);
if (card->power_state == SNDRV_CTL_POWER_D3hot)
return 0;
@@ -834,13 +831,10 @@
return 0;
}
-static int snd_generic_resume(struct device *dev, u32 level)
+static int snd_generic_resume(struct device *dev)
{
snd_card_t *card;
- if (level != RESUME_ENABLE)
- return 0;
-
card = get_snd_generic_card(dev);
if (card->power_state == SNDRV_CTL_POWER_D0)
return 0;
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 9e76bdd..b57519a 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -231,7 +231,7 @@
devfs_mk_cdev(MKDEV(major, minor), S_IFCHR | device_mode, "snd/%s", name);
if (card)
device = card->dev;
- class_device_create(sound_class, MKDEV(major, minor), device, "%s", name);
+ class_device_create(sound_class, NULL, MKDEV(major, minor), device, "%s", name);
up(&sound_mutex);
return 0;
diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c
index 95fa81e..d33bb46 100644
--- a/sound/oss/soundcard.c
+++ b/sound/oss/soundcard.c
@@ -567,7 +567,7 @@
devfs_mk_cdev(MKDEV(SOUND_MAJOR, dev_list[i].minor),
S_IFCHR | dev_list[i].mode,
"sound/%s", dev_list[i].name);
- class_device_create(sound_class,
+ class_device_create(sound_class, NULL,
MKDEV(SOUND_MAJOR, dev_list[i].minor),
NULL, "%s", dev_list[i].name);
@@ -579,7 +579,7 @@
dev_list[i].minor + (j*0x10)),
S_IFCHR | dev_list[i].mode,
"sound/%s%d", dev_list[i].name, j);
- class_device_create(sound_class,
+ class_device_create(sound_class, NULL,
MKDEV(SOUND_MAJOR, dev_list[i].minor + (j*0x10)),
NULL, "%s%d", dev_list[i].name, j);
}
diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c
index f560dd8..d833349 100644
--- a/sound/parisc/harmony.c
+++ b/sound/parisc/harmony.c
@@ -197,7 +197,7 @@
spin_unlock(&h->lock);
if (dstatus & HARMONY_DSTATUS_PN) {
- if (h->psubs) {
+ if (h->psubs && h->st.playing) {
spin_lock(&h->lock);
h->pbuf.buf += h->pbuf.count; /* PAGE_SIZE */
h->pbuf.buf %= h->pbuf.size; /* MAX_BUFS*PAGE_SIZE */
@@ -216,7 +216,7 @@
}
if (dstatus & HARMONY_DSTATUS_RN) {
- if (h->csubs) {
+ if (h->csubs && h->st.capturing) {
spin_lock(&h->lock);
h->cbuf.buf += h->cbuf.count;
h->cbuf.buf %= h->cbuf.size;
@@ -316,6 +316,7 @@
case SNDRV_PCM_TRIGGER_STOP:
h->st.playing = 0;
harmony_mute(h);
+ harmony_write(h, HARMONY_PNXTADD, h->sdma.addr);
harmony_disable_interrupts(h);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
@@ -351,8 +352,9 @@
break;
case SNDRV_PCM_TRIGGER_STOP:
h->st.capturing = 0;
- harmony_mute(h);
- harmony_disable_interrupts(h);
+ harmony_mute(h);
+ harmony_write(h, HARMONY_RNXTADD, h->gdma.addr);
+ harmony_disable_interrupts(h);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
@@ -408,7 +410,8 @@
h->pbuf.size = snd_pcm_lib_buffer_bytes(ss);
h->pbuf.count = snd_pcm_lib_period_bytes(ss);
- h->pbuf.buf = 0;
+ if (h->pbuf.buf >= h->pbuf.size)
+ h->pbuf.buf = 0;
h->st.playing = 0;
h->st.rate = snd_harmony_rate_bits(rt->rate);
@@ -437,7 +440,8 @@
h->cbuf.size = snd_pcm_lib_buffer_bytes(ss);
h->cbuf.count = snd_pcm_lib_period_bytes(ss);
- h->cbuf.buf = 0;
+ if (h->cbuf.buf >= h->cbuf.size)
+ h->cbuf.buf = 0;
h->st.capturing = 0;
h->st.rate = snd_harmony_rate_bits(rt->rate);
@@ -712,13 +716,14 @@
left = (h->st.gain >> shift_left) & mask;
right = (h->st.gain >> shift_right) & mask;
-
if (invert) {
left = mask - left;
right = mask - right;
}
+
ucontrol->value.integer.value[0] = left;
- ucontrol->value.integer.value[1] = right;
+ if (shift_left != shift_right)
+ ucontrol->value.integer.value[1] = right;
spin_unlock_irqrestore(&h->mixer_lock, flags);
@@ -738,22 +743,82 @@
int old_gain = h->st.gain;
unsigned long flags;
- left = ucontrol->value.integer.value[0] & mask;
- right = ucontrol->value.integer.value[1] & mask;
- if (invert) {
- left = mask - left;
- right = mask - right;
- }
-
spin_lock_irqsave(&h->mixer_lock, flags);
- h->st.gain &= ~( (mask << shift_right) | (mask << shift_left) );
- h->st.gain |= ( (left << shift_left) | (right << shift_right) );
+ left = ucontrol->value.integer.value[0] & mask;
+ if (invert)
+ left = mask - left;
+ h->st.gain &= ~( (mask << shift_left ) );
+ h->st.gain |= (left << shift_left);
+
+ if (shift_left != shift_right) {
+ right = ucontrol->value.integer.value[1] & mask;
+ if (invert)
+ right = mask - right;
+ h->st.gain &= ~( (mask << shift_right) );
+ h->st.gain |= (right << shift_right);
+ }
+
snd_harmony_set_new_gain(h);
spin_unlock_irqrestore(&h->mixer_lock, flags);
- return (old_gain - h->st.gain);
+ return h->st.gain != old_gain;
+}
+
+static int
+snd_harmony_captureroute_info(snd_kcontrol_t *kc,
+ snd_ctl_elem_info_t *uinfo)
+{
+ static char *texts[2] = { "Line", "Mic" };
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = 1;
+ uinfo->value.enumerated.items = 2;
+ if (uinfo->value.enumerated.item > 1)
+ uinfo->value.enumerated.item = 1;
+ strcpy(uinfo->value.enumerated.name,
+ texts[uinfo->value.enumerated.item]);
+ return 0;
+}
+
+static int
+snd_harmony_captureroute_get(snd_kcontrol_t *kc,
+ snd_ctl_elem_value_t *ucontrol)
+{
+ harmony_t *h = snd_kcontrol_chip(kc);
+ int value;
+ unsigned long flags;
+
+ spin_lock_irqsave(&h->mixer_lock, flags);
+
+ value = (h->st.gain >> HARMONY_GAIN_IS_SHIFT) & 1;
+ ucontrol->value.enumerated.item[0] = value;
+
+ spin_unlock_irqrestore(&h->mixer_lock, flags);
+
+ return 0;
+}
+
+static int
+snd_harmony_captureroute_put(snd_kcontrol_t *kc,
+ snd_ctl_elem_value_t *ucontrol)
+{
+ harmony_t *h = snd_kcontrol_chip(kc);
+ int value;
+ int old_gain = h->st.gain;
+ unsigned long flags;
+
+ spin_lock_irqsave(&h->mixer_lock, flags);
+
+ value = ucontrol->value.enumerated.item[0] & 1;
+ h->st.gain &= ~HARMONY_GAIN_IS_MASK;
+ h->st.gain |= value << HARMONY_GAIN_IS_SHIFT;
+
+ snd_harmony_set_new_gain(h);
+
+ spin_unlock_irqrestore(&h->mixer_lock, flags);
+
+ return h->st.gain != old_gain;
}
#define HARMONY_CONTROLS (sizeof(snd_harmony_controls)/ \
@@ -767,10 +832,25 @@
((mask) << 16) | ((invert) << 24)) }
static snd_kcontrol_new_t snd_harmony_controls[] = {
- HARMONY_VOLUME("Playback Volume", HARMONY_GAIN_LO_SHIFT,
+ HARMONY_VOLUME("Master Playback Volume", HARMONY_GAIN_LO_SHIFT,
HARMONY_GAIN_RO_SHIFT, HARMONY_GAIN_OUT, 1),
HARMONY_VOLUME("Capture Volume", HARMONY_GAIN_LI_SHIFT,
HARMONY_GAIN_RI_SHIFT, HARMONY_GAIN_IN, 0),
+ HARMONY_VOLUME("Monitor Volume", HARMONY_GAIN_MA_SHIFT,
+ HARMONY_GAIN_MA_SHIFT, HARMONY_GAIN_MA, 1),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Input Route",
+ .info = snd_harmony_captureroute_info,
+ .get = snd_harmony_captureroute_get,
+ .put = snd_harmony_captureroute_put
+ },
+ HARMONY_VOLUME("Internal Speaker Switch", HARMONY_GAIN_SE_SHIFT,
+ HARMONY_GAIN_SE_SHIFT, 1, 0),
+ HARMONY_VOLUME("Line-Out Switch", HARMONY_GAIN_LE_SHIFT,
+ HARMONY_GAIN_LE_SHIFT, 1, 0),
+ HARMONY_VOLUME("Headphones Switch", HARMONY_GAIN_HE_SHIFT,
+ HARMONY_GAIN_HE_SHIFT, 1, 0),
};
static void __init
@@ -852,14 +932,14 @@
memset(&h->pbuf, 0, sizeof(h->pbuf));
memset(&h->cbuf, 0, sizeof(h->cbuf));
- h->hpa = padev->hpa;
+ h->hpa = padev->hpa.start;
h->card = card;
h->dev = padev;
h->irq = padev->irq;
- h->iobase = ioremap_nocache(padev->hpa, HARMONY_SIZE);
+ h->iobase = ioremap_nocache(padev->hpa.start, HARMONY_SIZE);
if (h->iobase == NULL) {
printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n",
- padev->hpa);
+ padev->hpa.start);
err = -EBUSY;
goto free_and_ret;
}
diff --git a/sound/parisc/harmony.h b/sound/parisc/harmony.h
index ef77f9a..526c523 100644
--- a/sound/parisc/harmony.h
+++ b/sound/parisc/harmony.h
@@ -61,7 +61,7 @@
#define HARMONY_SIZE 64
#define BUF_SIZE PAGE_SIZE
-#define MAX_BUFS 10
+#define MAX_BUFS 16
#define MAX_BUF_SIZE (MAX_BUFS * BUF_SIZE)
#define PLAYBACK_BUFS MAX_BUFS
@@ -101,28 +101,31 @@
#define HARMONY_SS_MONO 0x00000000
#define HARMONY_SS_STEREO 0x00000001
-#define HARMONY_GAIN_SILENCE 0x00F00FFF
-#define HARMONY_GAIN_DEFAULT 0x0FF00000
+#define HARMONY_GAIN_SILENCE 0x01F00FFF
+#define HARMONY_GAIN_DEFAULT 0x01F00FFF
-#define HARMONY_GAIN_HE_SHIFT 27
+#define HARMONY_GAIN_HE_SHIFT 27 /* headphones enabled */
#define HARMONY_GAIN_HE_MASK (1 << HARMONY_GAIN_HE_SHIFT)
-#define HARMONY_GAIN_LE_SHIFT 26
+#define HARMONY_GAIN_LE_SHIFT 26 /* line-out enabled */
#define HARMONY_GAIN_LE_MASK (1 << HARMONY_GAIN_LE_SHIFT)
-#define HARMONY_GAIN_SE_SHIFT 25
+#define HARMONY_GAIN_SE_SHIFT 25 /* internal-speaker enabled */
#define HARMONY_GAIN_SE_MASK (1 << HARMONY_GAIN_SE_SHIFT)
-#define HARMONY_GAIN_IS_SHIFT 24
+#define HARMONY_GAIN_IS_SHIFT 24 /* input select - 0 for line, 1 for mic */
#define HARMONY_GAIN_IS_MASK (1 << HARMONY_GAIN_IS_SHIFT)
+/* monitor attenuation */
#define HARMONY_GAIN_MA 0x0f
#define HARMONY_GAIN_MA_SHIFT 20
#define HARMONY_GAIN_MA_MASK (HARMONY_GAIN_MA << HARMONY_GAIN_MA_SHIFT)
+/* input gain */
#define HARMONY_GAIN_IN 0x0f
#define HARMONY_GAIN_LI_SHIFT 16
#define HARMONY_GAIN_LI_MASK (HARMONY_GAIN_IN << HARMONY_GAIN_LI_SHIFT)
#define HARMONY_GAIN_RI_SHIFT 12
#define HARMONY_GAIN_RI_MASK (HARMONY_GAIN_IN << HARMONY_GAIN_RI_SHIFT)
+/* output gain (master volume) */
#define HARMONY_GAIN_OUT 0x3f
#define HARMONY_GAIN_LO_SHIFT 6
#define HARMONY_GAIN_LO_MASK (HARMONY_GAIN_OUT << HARMONY_GAIN_LO_SHIFT)
diff --git a/sound/pci/ac97/ac97_bus.c b/sound/pci/ac97/ac97_bus.c
index becbc42..ec70fad 100644
--- a/sound/pci/ac97/ac97_bus.c
+++ b/sound/pci/ac97/ac97_bus.c
@@ -31,7 +31,8 @@
int ret = 0;
if (dev->driver && dev->driver->suspend)
- ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN);
+ ret = dev->driver->suspend(dev, state);
+
return ret;
}
@@ -40,7 +41,8 @@
int ret = 0;
if (dev->driver && dev->driver->resume)
- ret = dev->driver->resume(dev, RESUME_POWER_ON);
+ ret = dev->driver->resume(dev);
+
return ret;
}
diff --git a/sound/ppc/beep.c b/sound/ppc/beep.c
index 31ea7a4..1681ee1 100644
--- a/sound/ppc/beep.c
+++ b/sound/ppc/beep.c
@@ -31,14 +31,14 @@
#include "pmac.h"
struct snd_pmac_beep {
- int running; /* boolean */
- int volume; /* mixer volume: 0-100 */
+ int running; /* boolean */
+ int volume; /* mixer volume: 0-100 */
int volume_play; /* currently playing volume */
int hz;
int nsamples;
short *buf; /* allocated wave buffer */
dma_addr_t addr; /* physical address of buffer */
- struct input_dev dev;
+ struct input_dev *dev;
};
/*
@@ -212,47 +212,55 @@
int __init snd_pmac_attach_beep(pmac_t *chip)
{
pmac_beep_t *beep;
- int err;
+ struct input_dev *input_dev;
+ void *dmabuf;
+ int err = -ENOMEM;
- beep = kmalloc(sizeof(*beep), GFP_KERNEL);
- if (! beep)
- return -ENOMEM;
-
- memset(beep, 0, sizeof(*beep));
- beep->buf = dma_alloc_coherent(&chip->pdev->dev, BEEP_BUFLEN * 4,
- &beep->addr, GFP_KERNEL);
-
- beep->dev.evbit[0] = BIT(EV_SND);
- beep->dev.sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
- beep->dev.event = snd_pmac_beep_event;
- beep->dev.private = chip;
+ beep = kzalloc(sizeof(*beep), GFP_KERNEL);
+ dmabuf = dma_alloc_coherent(&chip->pdev->dev, BEEP_BUFLEN * 4,
+ &beep->addr, GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!beep || !dmabuf || !input_dev)
+ goto fail;
/* FIXME: set more better values */
- beep->dev.name = "PowerMac Beep";
- beep->dev.phys = "powermac/beep";
- beep->dev.id.bustype = BUS_ADB;
- beep->dev.id.vendor = 0x001f;
- beep->dev.id.product = 0x0001;
- beep->dev.id.version = 0x0100;
+ input_dev->name = "PowerMac Beep";
+ input_dev->phys = "powermac/beep";
+ input_dev->id.bustype = BUS_ADB;
+ input_dev->id.vendor = 0x001f;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->evbit[0] = BIT(EV_SND);
+ input_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+ input_dev->event = snd_pmac_beep_event;
+ input_dev->private = chip;
+ input_dev->cdev.dev = &chip->pdev->dev;
+
+ beep->dev = input_dev;
+ beep->buf = dmabuf;
beep->volume = BEEP_VOLUME;
beep->running = 0;
- if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_pmac_beep_mixer, chip))) < 0) {
- kfree(beep->buf);
- kfree(beep);
- return err;
- }
+
+ err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_pmac_beep_mixer, chip));
+ if (err < 0)
+ goto fail;
chip->beep = beep;
- input_register_device(&beep->dev);
+ input_register_device(beep->dev);
return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(dmabuf);
+ kfree(beep);
+ return err;
}
void snd_pmac_detach_beep(pmac_t *chip)
{
if (chip->beep) {
- input_unregister_device(&chip->beep->dev);
+ input_unregister_device(chip->beep->dev);
dma_free_coherent(&chip->pdev->dev, BEEP_BUFLEN * 4,
chip->beep->buf, chip->beep->addr);
kfree(chip->beep);
diff --git a/sound/sound_core.c b/sound/sound_core.c
index 954f994..394b53e 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -174,7 +174,7 @@
devfs_mk_cdev(MKDEV(SOUND_MAJOR, s->unit_minor),
S_IFCHR | mode, s->name);
- class_device_create(sound_class, MKDEV(SOUND_MAJOR, s->unit_minor),
+ class_device_create(sound_class, NULL, MKDEV(SOUND_MAJOR, s->unit_minor),
dev, s->name+6);
return r;